12 best auto winders

• New and Improved Mabuchi Japanese motor and gearbox design. The Watch Winder has 4 Turns Per Day (650-850-1050-1250) settings and 3 direction settings for clockwise, counter clockwise, and bi-directional. There are 12 different setting combinations. The watch winder will turn for approximately 5 minutes, then rests varies depending on setting. This cycle will repeat while the watch winder is on. The watch winder is programmed not to turn continuously which will overwind your watch.
• Versa Watch Winders are the Best Selling Watch Winders on Amazon. Using only top quality parts such as Japanese Mabuchi motors with custom designed gear boxes to reduce noise level. The design of the watch winder has been tested and will not cause harm to your expensive automatic watches due to magnetization. Each part is precisely designed and tooled by machine and then hand assembled for exact fit and finish. All watch winders are designed and modified in the USA.
• Power adapter included (100-240V) and instruction manual is included.
• Spring action watch pillows with additional attachments to hold large watches are included.
• 1 Year Warranty - Customer service is very important and we stand behind our products. Any problems you have please contact us and we will do our best to take care of it. Note - Watch winders are not compatible with Seiko Kinetic Watches because the watch mechanism is not the same as traditional automatic movement watches.

User questions & answers

Question:	Will this work with Rolex Sub Mariner
Answer:	Yes the watch winder will wind Rolex watches. You will need to set it to bi-directional mode and at least 850-1050 TPD. Thank you
Question:	Hi. I inherited my mother's 1974 Rolex Oyster. I don't wear it daily and would like to get a winder. Will this model work with this watch
Answer:	There is a large watch adapter plate I dont see why not. It has worked very well for nads its very quiet. A very deal ccompared to all the other ridiculuos expensive ones you see. All it is a rotating cradle with a timer. Probable cost of manufacture is less than 3 dollars. This one is essentially silent, does the job perfectly and is priced right.
Question:	will this work with a 1964 omega self winding watch
Answer:	HelloAs long as the watch is well maintained and has been recently serviced by an authorized Omega service center, our watch winder should work fine for your watch.Thank you
Question:	Has anyone else had issues with this staying on? I have had it on for hours and have to unplug it and plug it back in after 5 minutes
Answer:	I just got one and it is set to 650 TPD and Bi-Directional. I runs in 1 direction for 5 minutes, then rests for about an hour then it restarts in the opposite direction and runs for about 5 minutes, and it repeats this process until I turn the winder off.

Product description

Shakespeare Auto Winder II String Trimmer Bump Head 0.80"-0.105"

• Brand New in box. The product ships with all relevant accessories

User questions & answers

Question:	does it fit Husqvarna
Answer:	This is the standard way of notating water resistance. Its saying the watch can withstand the pressure equivalent of 30M of water - perfectly still water and a perfectly still watch. Move the watch about and it increases the pressure drastically. You want 10ATM, (100M) water resistance, minimum, to go swimming in it and be confident nothing will happen to it. At 30M it might be fine, it might not.
Question:	will it fit a Kobalt 40v battery powered grass trimmer
Answer:	I purchased the Black watch and it comes with a Red second hand.
Question:	Does it fit Echo gt
Answer:	Hi Stacy. Yes, this Timex watch does have the Indiglo backlight.
Question:	Will this product fir troy-bilt tb22ec, with right hand threads
Answer:	Here's a modification to make the watch less noisy. 1) Purchase an ordinary watch repair kit; that can run as little as $12, $14. 2) Clear a counter in the kitchen. 3) Disinfect the area where the work will be done. It must be sparkly clean. 4) Have some alcohol on hand. Now, with those preparations out of the way, put the watch face-up on the counter. Grab a hammer and beat the sumbich until it's about the thickness of a quarter. That should fix the problem. Take a shot or two of the alcohol. Order a new watch.

• 【HIGH QUALITY MATERIAL】 High-grade PU leather, Comes with a elegant leather box that leaves off a premium impression.Soft interior has been applied to protect your watch and avoid scratches,Adjustable pillow in the middle fits different-sized watches. The design fits for displaying your automatic watch.
• 【SUPER QUIET MOTOR】 Extremely quiet and long lasting, running without noise. The level of noise is fully negligible as you can enjoy displaying your watch in the bedroom for example without representing a distraction factor and fall asleep at ease at night.
• 【ROTATIONAL MODE SETTING】 It operates clockwise and counterclockwise as well as bi-directional and pause intermittently. It is set to turn clockwise for around 2 minutes and then, it rest for 6 minutes. Resume counterclockwise for 2 minutes and pause for 6 minutes. It ensures your watch keeps running.
• 【DUAL POWER OPTIONS】The watch winder can be powered by either AC adapter(Voltage: 100-240V, 50/60HZ, 0.3A) or 2 AA batteries (Not included). You can use this at home and during travels more conveniently.
• 【ATTENTION & WARRANTY GUARANTEED】As this watch winder is powered by battery or AC power socket, when you are using the adapter, please ensure that you have totally taken out the battery from the device,Otherwise it will be burned out of the motor. We offer a 3-monthes money back guarantee and 1-year Warranty, As a new store, customers' comments will play an important role to our shop.If there is a problem with the product. please email us, we would reply you in 24 hours.

User questions & answers

Question:	Will this hold a watchband inside perimeter of 155mm (15.5cm or 6 1/4 in
Answer:	No, it's much smaller than that. The little pillow holds approx 2.5 inches so that it is snug and won't fall out of the turning disk.
Question:	Is this on dual voltage? Need 220V
Answer:	110v or 220v but it also will operate on 2-AA batteries.
Question:	Is the adapter included
Answer:	Yes, it is included.
Question:	how long should a watch be kept on a watch winder
Answer:	I leave my watch in the winder all the time. It runs for about 2 min and rest for 5 min.

• Powered with Japanese super slient motor no running noise. Nice looking, easy to operate.
• 100% handmade and good value. The use of acrylic glass, environmental protection piano lacquer and transmission using copper fittings. Four turntables with PU soft watch pilow, smooth, atmosphere and quality with high-grade.
• Watch winder motor have 3 direction settings (clockwise, counter-clockwise and alternating) and multiple Turns Per Day settings.
• Upgraded 5 Program Settings : Mode 1:OFF. Mode 2 : 4.5 mins CW, rest for 55.5 mins, Repeat. Mode 3 :4.5 mins CCW, rest for 55.5 mins,Repeat. Mode4:4 mins CW, rest for 26 mins, then 4 mins CCW, rest for 26 mins,Repeat. Mode 5 : 6 mins CW, rest for 24 mins CCW(work 4 hours, rest 8 hours) ,then 4.5 mins CCW, rest for 55.5 mins(work 4 hours, rest 8 hours).
• Powered by 100-240v AC Adapter(included). 12-month Warranty, 7*24 friendly customer service.

User questions & answers

Question:	Is there plenty of clearance for larger watches
Answer:	Yes it’s universal and has many adapters that comes with it
Question:	Do you repair previously purchased jqueen model #w002 non-working watch winders bought on amazon
Answer:	They are universal
Question:	Hi, I loss the wire, is there anyway to buy it buy itself? Thank you
Answer:	yes it will
Question:	How many watches are in motion
Answer:	Has multiple thread adapters should work.

Product features

JQUEEN Watch Winder

JQUEEN watch winder is a well known watch winder manufacturer, we manufacture each watch winder with great inspiration in design and premium quality in materials. Up to million persons from more than 20 countries use JQUEEN watch winder every year. If you are Struggling to find a reliable watch winder brand, with no doubt that is JQUEEN.

Enshrine, Display, Present

Whether for the appearance or the premium quality, with no doubt that JQUEEN watch winder will be the best choice to enshrine and display your beloved watches. What’s more, you could send this surprise present to your family members and your friends. It is a perfect gift on festival (Christmas, Thanksgiving, Valentine’s Day, Father’s Day) or Anniversary.

Ultra-quiet Japanese motor

JQUEEN watch winder use upgrade mabuchi motor, control tiresome noise below 10 db, bring you a infantile sleep.

Easy to Use

Multiple Settings for Rotation, more accurate :

Mode1: OFF.

Mode2: Rotate 4 minutes 30 second Clockwise. Rest for 55 minutes 30 second. Repeat.

Mode3: Rotate 4 minutes 30 second Counter-Clockwise. Rest for 55 minutes 30 second. Repeat.

Mode4: Rotate 4 minutes Clockwise. Rest for 26 minutes. Rotate 4 minutes Counter-Clockwise. Rest for 26 minutes. Repeat.

Mode5: Rotate 6 minutes Clockwise. Rest for 24 minutes. (work 4 hours, rest 8 hours), Rotate 4 minutes 30 second Counter-Clockwise. Rest for 55 minutes 30 second (work 4 hours, rest 8 hours).

Exquisite Workmanship

100% handmade with 68 procedures Paint process need more than 30 days to completed. Use of acrylic glass, environmental protection piano lacquer and transmission using copper fittings. Three turntables with PU soft watch pillows, smooth, atmosphere and quality with high-grade.

• JQUEEN watch winder for automatic watches, powered with Upgraded Japanese super silent motor ,noise as low as 5 db to rotate your watches quiet and safe ,no running noise.
• Upgraded 5 Program Settings : Mode 1:OFF. Mode 2 : 4.5 mins CW, rest for 55.5 mins, Repeat. Mode 3 :4.5 mins CCW, rest for 55.5 mins,Repeat. Mode4:4 mins CW, rest for 26 mins, then 4 mins CCW, rest for 26 mins,Repeat. Mode 5 : 6 mins CW, rest for 24 mins CCW(work 4 hours, rest 8 hours) ,then 4.5 mins CCW, rest for 55.5 mins(work 4 hours, rest 8 hours).
• JQUEEN watch winder has deluxe paint surface, elegant design, quiet with good operation.It will keep your watch bright as new and protect your watch from scratches and dust .Anti-magnetic design makes your watch safer in the watch winder box.
• The double watch widner has plenty of interior space for large and oversize watches,it will fully meet your expectations.
• Dual power supply: Powered by 100-240v AC Adapter(included) or 2 *1.5V Battery (not included).18-months Warranty.

User questions & answers

Question:	Please someone explain to me which mode should I use...could I hurt my watch if I use a wrong mode
Answer:	Depends on the watch. If you have one with a comfortable power reserve, setting 1 or 2 is probably enough. I have an skx007 with a 7s26 movement that loses time so I keep it on #3.
Question:	To the seller: what is the warranty on this item
Answer:	Hi, we have 18 months warranty for this item. Any problem, please feel free to let me know
Question:	Is it durable? I don't want to spend $100 on a winder which only lasts 1 year. Is it possible to get a replacement motor
Answer:	I have had mine for about 2 years. It stopped working about 18 months in. Nice, quality but the mechanisms/electronics no longer work.
Question:	How many turns per day do the settings result in ? Or how long does each turn take
Answer:	Base on my calculation, I timed it myself and each rotates takes roughly about 8 second on my unit. No way it is 5 second. that's pretty fast. Mode 1,2,3 are pretty much the same, rotate 2 minutes and rest for 6 minutes. let say 8 seconds per turn, 2 minutes (160 seconds) will be 15 turns and it rest for 6 minutes. Which means 15 turns in 8 minutes. One hour (60 minutes) will be 112.5 turns. So, in a day it will be 24 hours X 112.5 which is roughly 2700 turns. That is way too much according to the recommendation.. http://orbita.com/2010_web/NEW/Database-S.htm My Seiko needs about 500 - 950 TPD. Mode 4 is rotate for 3 hours and then rest for 9 hours. 3 hours (60 mins x 3) = 180 minutes. My unit is 7.5 turns per minute. That's insane 1350 turns in 3 hours. Way too much. I wish they could have done some research before setting these timers. What I end up doing was using a timer myself and set it to a maximum of 8 hour per day. Using Mode 3. CW and CCW. Turn for 2 minutes and Rest for 6. If my math is correct, 8 hours will give me about 900 turns. Will see how it goes. Hope this help..

Product features

JQUEEN Watch Winder

JQUEEN watch winder is a well known watch winder manufacturer, we manufacture each watch winder with great inspiration in design and premium quality in materials. Up to million persons from more than 20 countries use JQUEEN watch winder every year. If you are Struggling to find a reliable watch winder brand, with no doubt that is JQUEEN.

Easy Operation

Multiple Settings for Rotation, more accurate :

Mode1: OFF.

Mode2: Rotate 4 minutes 30 second Clockwise. Rest for 55 minutes 30 second. Repeat.

Mode3: Rotate 4 minutes 30 second Counter-Clockwise. Rest for 55 minutes 30 second. Repeat.

Mode4: Rotate 4 minutes Clockwise. Rest for 26 minutes. Rotate 4 minutes Counter-Clockwise. Rest for 26 minutes. Repeat.

Mode5: Rotate 6 minutes Clockwise. Rest for 24 minutes. (work 4 hours, rest 8 hours), Rotate 4 minutes 30 second Counter-Clockwise. Rest for 55 minutes 30 second (work 4 hours, rest 8 hours).

Safeguard Your Sound Sleep

JQUEEN watch winder use upgrade mabuchi motor, control tiresome noise below 5 db, give your a infantile sleep.

Fit for All Size of Your Watches

No matter women's small size or men's oversized watch, the mechanical automatic watch winder is able to hold it. Interior with high quality PU pillows, more luxury, premium and exclusive. And anti-magnetic design makes your watch safer in the watch winder box.

Exquisite Workmanship

100% handmade with 68 procedures Paint process need more than 30 days to completed. Use of acrylic glass, environmental protection piano lacquer and transmission using copper fittings. One turntable with PU soft watch pillows, smooth, atmosphere and quality with high-grade. It is a perfect gift for your family and friends on festival (Christmas, Thanksgiving, Valentine’s Day, Father’s Day) or Anniversary.

Product description

The Ernie Ball PowerPeg is the first of its kind self-contained motorized pegwinder that allows you to restring your instrument up to 70% faster than traditional manual pegwinders! The PowerPeg is powered by 4 AA batteries (not included) featuring a proprietary universal peg head that fits virtually all bass, acoustic, and electric guitar tuning machines! Part number 4118.

• Takes the hassle out of changing strings. AA batteries required (best with Polaroid AA batteries)
• Up to 70 % faster than a manual winder
• Engineered peg head fits virtually all tuning machines
• Works on all electric, bass, and acoustic instruments
• Forward and reverse capabilities up to 200 rpm

User questions & answers

Question:	Mine went completely dead in less than a year. Could it be the battery? Where do you get a replacement battery, and how do you replace it
Answer:	One issue with larger watches is if the band or buckle is too wide, it won't fit in the winding slots, nor in the storage slots (32mm max width). I have a few large watches that won't fit, unless I rig up a custom pillow of my own to hold the watch in the slots. Then there's the issue of making sure the watch is snug so it doesn't lurch when turning, as this would wear out the motor pre-maturely, and the watch may fall out. Other than that, it is very quiet and stylish, and well made for the price. Just wish the slots would have been wider and the pillows more adjustable.
Question:	Is there some type of clutch or sensor to let a person know when he has approached at tuned string or will it just keep going until the string breaks
Answer:	They gave me new motors and all is good.
Question:	What is the difference in the pro vs. the non pro
Answer:	Sorry i have not hd to replace the wire. Is there mfr website?
Question:	How many batteries does this take? And how long do they last
Answer:	Each turntable is individually controlled. You can have as few as one watch or as many as six watches in motion.

Product features

Ernie Ball Power Peg

The Ernie Ball Power Peg is the first of its kind self-contained motorized pegwinder that allows you to restring your instrument up to 70% faster than traditional manual pegwinders. The Power Peg is powered by 4 AA batteries (not included) featuring a proprietary universal peg head that fits virtually all bass, acoustic, and electric guitar tuning machines.

• ►FASHION DESIGN:selected paino piant and clear acrylic glass give this deluxe watch winder box a comfortable touch and enduring use,a great gift option.
• ►EXTREMELY QUIET:MOZSLY watch winder use Japan MABUCHI motor inside make it a long-lasting, extremely silent when running.
• ►AC & DC POWER SOURCE: AA batteries makes it mobile winder. You can put it in cabinet or take to trip. AC power is more fit for daily use. -Battery and Adapter can't work.
• ►12 ROTATION MODES & SOFT PILLOW: this watch winder has 4 TPDs（650-900-1200-1500)and 3 directions, makes watches high compatible. The watch winder comes with soft and flexible pillows, fitted for all kinds of automatic watches.
• ►2-YEAR WARRANTY: we have 100% confidence for the quality of MOZSLY watch winder. If you have any problems, please feel free to contact us.

User questions & answers

Question:	How do I know which settings are suitable for my watch
Answer:	We suggest you could contact your automatic watch seller or manufacturer for the info of TPD and rotation direction requirement. Generally, you can always select the alternately clockwise/counterclockwise, meanwhile always select a higher TPD if the current setting doesn't fully wind your watch, especially for the larger or heavier ones. Hope it could help.
Question:	I bought this and just realized it only works on batteries...why does it not work when you plug it in
Answer:	I am sorry that our products will have such problems. As for the product you said, you can use the battery, you can't use the charging cable. First of all, if you plug in the hole, we should insert it in IN. Secondly, if the adapter is broken, you can try to take the adapter at home. Because our products are factory tested, there should be no problem with the computer system. If it doesn't work, please contact us.Our products have two years of after-sales service.waiting for your reply.
Question:	Package dimensions" are listed as 10.7 x 6.3 x 6 inches, what are the dimensions of the product itself
Answer:	The product dimension is 4.4 x 6 x 4.4 inch.
Question:	for all kinds of watch winder,the motor is easy to broken.Especially used for a long time, can you provide us with after-sales guarantee
Answer:	Yes, motor is a consumable product, and all the watch winder on the market will face problems. We are also trying to upgrade our motors to find better motors.we are now equipped with Japan's ultra quiet motor As for the current after-sales service, we will provide a new motor, as well as the tools needed to replace the motor, as well as the replacement video for you. The replacement process is very simple and can be completed in just three minutes.

Product features

WHAT IS MOZSLY WATCH WINDER

MOZSLY watch winder is a professional watch winder manufacturer, we combine ultra-quiet motors with precision design and variable rotation technology to create watch winder which suits many types of automatic watches. They are necessary tools for watch collectors.

Perfect Gift Choice

It's definitely something gorgeous that could be given as a gift and you would be proud to give.

Extremely Quiet

MOZSLY watch winder use MABUCHI motor that offers the watch winder box long-lasting running with no noise. You can put him anywhere, without any effect.

Easy To Use

The watch winder can be powered by an AC adaptor or 2 X AA size battery. You can also use one adapter to connect multiple mechanical watch boxes in series.

12 Rotation Modes

MOZSLY watch winder has three winding direction & 4TPD mode settings to reach ideal status for your watch's accuracy. You will always find the proper TPDs and Rotation for your watches.

• NEW AND IMPROVED - Now with independent settings and controls for each winder. Mabuchi Japanese Motor and Gearbox. The Watch Winder has 4 Turns Per Day (650-850-1050-1250) settings and 3 direction settings for clockwise, counter clockwise, and bi-directional. There are 12 different setting combinations.
• Versa Watch Winders are the Best Selling Watch Winders on Amazon. Using only top quality parts such as Japanese Mabuchi motors with custom designed gear boxes to reduce noise level. The design of the watch winder has been tested and will not cause harm to your expensive automatic watches due to magnetization. Each part is precisely designed and tooled by machine and then hand assembled for exact fit and finish. All watch winders are designed and modified in the USA.
• Power adapter included (100-240V) and instruction manual is included. Note: The watch winder will turn for approximately 5 minutes, then rests varies depending on setting. This cycle will repeat while the watch winder is on. The watch winder is programmed not to turn continuously which will overwind your watch.
• Spring action watch pillows with additional attachments to hold large watches are included.
• 1 Year Warranty - Customer service is very important and we stand behind our products. Any problems you have please contact us and we will do our best to take care of it. Note - Watch winders are not compatible with Seiko Kinetic Watches because the watch mechanism is not the same as traditional automatic movement watches.

User questions & answers

Question:	Does this double-watch unit have the blue light as the single unit has
Answer:	The unit has no light
Question:	Wil the winder accomodate an oversized watch? case size: 62 x 70 mm, case thickness: 15 mm - diesel dz
Answer:	HelloYes there is enough interior space to hold your watch size.Thank you
Question:	is it battery or electric controled
Answer:	It is electric. The cable is approximately two feet long.
Question:	what are the TPD per each setting , A, B, C, D
Answer:	From the instructions for the Versa:Setting A: about 342 TPD (turns per day) - interval: 33 second rotation/12 minute pauseSetting B: about 864 TPD - interval: 10 minute rotation/90 minute pauseSetting C: about 1080 TPD - interval: 30 minute rotation/3 hours pauseSetting C: about 2160 TPD - interval: 1 hour rotation/3 hours pauseI keep it set at setting B and my watches operate at 28,800 bphI hope this is helpful.

Product description

• ALL-IN-ONE RESTRINGING TOOL - The ergonomic and high-quality design of the D'Addario Accessories Pro-Winder makes string changes quicker and easier than ever before with its built-in clippers, bridge pin puller and peg winder all rolled into one tool.
• MUST HAVE FOR EVERY CASE – Why fill up your case with three tools when you can have one that does it all? This indispensable tool has been designed to fit comfortably in your hand and for use on virtually all electric and acoustic guitars, basses, banjos and mandolins. Also available in a bass guitar version.
• BUILT-IN STRING CUTTER – With the hardened steel clippers on the Pro-Winder string cutter you can cleanly cut through your old strings to remove them quicker and easier, and trim the excess off new strings after looping them through the tuning machines.
• INTEGRATED BRIDGE PIN PULLER- Designed with acoustic guitarists in mind, the Pro-Winder has a built-in bridge pin puller. This makes removing stubborn pins simple without risking damage caused by pliers and other tools.
• MADE IN THE USA - D'Addario Accessories is known for innovative, problem-solving, quality musical accessories that are proudly designed, engineered, and manufactured in the USA to the most stringent quality controls in the industry.

User questions & answers

Question:	Does this work on a ukelele
Answer:	Hi, Thank you for your inquiry. Yes, our capos should work well even with left-handed guitars too. Hope this helps! Please don't hesitate to contact us again should you have any further questions, we're here for you. :-) Best regards, Manilyn / Nordic Essentials
Question:	Will this fit the tuner for a banjo's 5th string? (It's a bit larger than the other strings' tuners
Answer:	They aren't very big, I use them on my 6 string guitar and on my sons smaller guitar.
Question:	Does it work on classic guitar
Answer:	Partial capos can easily be used together with altered tunings, and a number of very fruitful combinations are already in use by some players. Tunings and capos are sort of "mirror images" of each other, and each have their own advantages and disadvantages.
Question:	Will it work on electric guitar, too, or just acoustic
Answer:	They do not work properly on my Taylor 656CE 12. At the 5th fret and up, okay but they do not work below that. Recently had the guitar set up and the action is quite low so I am surprised the capo could not compress below the 5th fret.

Product features

A GAME CHANGER FOR STRING CHANGES

Unlike ordinary peg winders, the Pro-Winder is a high-quality peg winder with a built-in clipper and bridge pin puller. The Pro-Winder is designed to fit virtually all guitars, basses, banjos, and mandolins. Ergonomically designed with durable hardened steel wire cutters, the Pro-Winder is the ultimate all-in-one restringing tool. Keep one in every case!

Pro-Winder for Guitar

The patented Pro-Winder design is also available for bass guitar. With a handle designed for efficient and comfortable use and a peg winder that fits both vintage and modern basses, the Bass Pro-Winder has you covered. The hardened steel clippers are also tough enough to cut through bass strings with ease.

Cutting Through

With the hardened steel clippers on the Pro-Winders string cutter you can cut through your old strings to make removing them quicker, and trim the excess off of new strings after looping them through the tuning machines.

Pull the Pin

Designed with acoustic guitarists in mind, the Pro-Winder also has a built in bridgepin puller. This makes removing stubborn pins simple without risking damage caused by pliers and other tools.

Product description

What is an automatic watch winder?

Watch winder is a device with an electrical motor which will automatically wind your watch when you are not wearing it. Automatic watches have a limited power reserve, so if you stop wearing them and winding them up, they will run down in two or three days. This depends on the watch brand and on movement (caliber) used.

When your watch stops, you must reset time and wind up your watch. If your watch has additional functions (like date, moon-phase display, perpetual calendar), their resetting may take up quite a lot of time and require certain skills. Using an automatic watch winder, you can keep your watch wound and ready to go!

Fancy Brick Series watch winder description:

Compact watch winder for winding 1 watch.

Body material: plastic;

Interior color: Black

Maximum watch diameter: 2.125 inches (55 mm).

Power adapter is included with Fancy Brick winders and NOT INCLUDED with accessory boards.

Additional features:

• Soft polyurethane watch holder;
• 45 winding programs;

Product dimensions (WxHxL): 4.0" х 4.3" x 4.0" (10 cm x 11 cm x 10cm)

Product weight: 1.1 lbs (0.5 kg)

Please note: If your watch doesn't wind itself from wrist motion, it cannot be wound by automatic watch winder. Watch winders are not compatible with Seiko Kinetic Watches because the watch mechanism is not the same as traditional automatic movement watches.

Please note: Watch winding mode (winding direction and TPD setting) depends on your watch model. Please, check your watch owner's manual or contact your watch brand customer service for detailed information.

• ⭐ FITS MOST WATCHES: Spring action pillow is designed to fit all watch bracelet and strap sizes. It can be used for men’s as well as women's watches. Maximum watch diameter is 2.125" (55 mm).
• ⭐ STACKABLE DESIGN: Contacts on the top and bottom surfaces of the watch winder make it stackable - only one AC adapter is used for powering a set of 12 watch winders. As your collection grows, you just need to “add another Brick"! Accessory boards and Add-On modules are sold separately.
• ⭐ FULL COMPATIBILITY: 45 available winding programs meet all existing winding requirements. You can set the number of Turns-Per-Day from 650 to 3600 TPD.
• ⭐ PERFECT PRESENTATION: Watch comes to rest in 12 o'clock position for a better display after each winding cycle.
• ⭐ HIGH PRECISION WINDING: An electronic controller counts every turn of your watch to maintain supreme winding precision.

User questions & answers

Question:	How and where do i get an ac/dc adaptor for the boxy fancy brick stackable watch winder
Answer:	Same here. Worked fine for a year then died-won't recharge.
Question:	How do you turn it off? Where is it located
Answer:	For a bit more, you can get the Roadie Tuner that does just that-winds and tunes. https://amzn.com/B00ON9WQ1A
Question:	How noisy is it
Answer:	The Power Peg uses four (4) AA batteries. The Power Peg PRO has a rechargeable Lithium Ion battery so it is rechargeable. Depending on how much you use it that can save you a lot of money on throw away batteries. HOWEVER, if you don't treat it properly you can end up with a more expensive paperweight when the built in battery dies.
Question:	Can it be powered by batteries
Answer:	Four double A batteries. They last quite a while. I suppose it depends on what type of battery you use but I've never felt they wear out too fast.

• ⭐ UNIVERSAL COMPATIBILITY: Individually programmed rotors and 18 available winding programs meet all existing winding requirements. You can set the number of Turns-Per-Day from 600 to 2100 TPD. An electronic controller counts every turn of the watch to maintain SUPREME WINDING PRECISION.
• ⭐ FITS ALL WATCHES: Spring-loaded telescopic watch holders fit any bracelet and strap sizes and can be used for men’s as well as women’s watches. The maximum watch case diameter is 2.6 inches (65 mm).
• ⭐ PERFECT PRESENTATION: The watches come to rest in 12 o'clock position after each winding cycle for a better display.
• ⭐ GREAT APPEARANCE: Watch winder with brown faux leather finish will fit perfectly in any interior. Due to its compact size, you can put the winder into a wardrobe or a bookcase.
• ⭐ EASY USE & SETUP: An LCD display shows all available information about the operating modes of the watch winder. Touch control makes the setup process simple.

Product features

PRODUCT FEATURES

A watch winder is a device with an electric motor that can wind your automatic watch when you are not wearing it. When your watch stops, you must reset the time and wind it up. If your watch has additional functions (like date, moon-phase display, perpetual calendar, etc.), resetting them may take a lot of time and require certain skills. With an automatic watch winder, you can easily keep your watch wound and ready to go!

The automatic watch design does not allow the main spring to get ‘overwound’ but the correct setting of the number of turns per day prevents excessive wear of the winding mechanism.

• 18 winding programs;
• 600 to 2100 TPD (turns per day) range;
• 3 rotation directions;
• Vertical rotor stop position;
• Individually controlled rotors;
• Electronic rotation counter;
• Telescopic watch holders;
• LCD touchscreen display;
• Universal AC adapter (100–240V, 50/60 Hz).

INDIVIDUALLY PROGRAMMED ROTORS

The rotors are designed to operate independently. You can set an individual program for each watch depending on its winding requirements. Unused rotors can be disabled.

The rotors stop at the 12 o'clock position after each winding cycle for a better display of your watch collection.

FULL COMPATIBILITY

The 18 available winding programs provide compatibility with any watch models. You can set the number of turns per day from 600 to 2100 TPD in combination with any rotation direction.

The LCD touchscreen display makes setup quick and simple.

QUIET ROTORS

There are 3 rotation directions available: clockwise, counterclockwise, and bi-directional (mixed). In the mixed mode, the rotor rotates clockwise and counterclockwise alternately.

The rotors are very quiet. You can hardly hear them spinning.

PERFECT APPEARANCE

With a faux leather finish, this watch winder will fit perfectly in any interior. The watch winder has no door for easy use if installed in a cabinet or wardrobe.

Watch winders for 4 or 8 watches are available.

• Patent watch winder box with special noble look. Pear wood housing case, practical and ornamental for couple size watches.
• The double watch winder has 4 rotation setting modes. Use the silver control knob for different turn settings as needed.
• Extremely Quiet Motor& Excellent Customer Service: High-end motor, is extremely quiet and long lasting, running with no noise. Any questions or issues feel free to contact us before return or leaving feedback. We are always strongly standing behind our products to satisfy your needs.
• C size Batteries or Power Option with Universal Power adapter.
• Watch winder Dimension: 7.4 x 8.8 x 7.9 inch, and self weight is 4.2LBS.

User questions & answers

Question:	Correct me if i'm wrong but it seems like all setting is 2880 tpd that is way too many for my watch's. any suggestions or should i return
Answer:	If Rolex says 600 TPD then I would get winder that turns 600 TPD. Try a wolf winder - have had it for awhile and is fantastic - and has correct adjustable settings - have used it for all my Rolex watches !! Which is easier to replace your Rolex or your winder ??
Question:	Will the light work for citizens eco drive watches
Answer:	The eco drive uses any light and this light is a lot brighter then it looks in picture !!
Question:	Is it supposed to stop after a few minutes and start again ? Or continuously go without interuption
Answer:	It should stop and start, not to run continuously
Question:	Can you use this for just one watch or will it throw off the balance
Answer:	It worked for one watch.