12 best z3 cases

Product description

You don’t have time to precision pack your briefcase. So pack along Commuter Series for Moto Z3 and Moto Z3 Play - the slim, sleek case that fits into any pocket, purse or bag. Featuring two tough layers - an internal slipcover and exterior shell - Commuter Series keeps your smartphone safe from drops, bumps, dust and life on the go.

• Compatible with Moto Z3 Play and Moto Z3
• DOES NOT come with a screen protector
• Thin, lightweight 2-piece case provides protection against drops, bumps and shock (port covers block entry of dust and debris).
• Slides easily in and out of pockets.
• Includes OtterBox limited lifetime warranty (see website for details) and 100% authentic.

User questions & answers

Question:	Will this product work with the zagg invisibleshield glass+ screen protector
Answer:	Yes
Question:	Does it fully protect the camera because it protrudes so much
Answer:	No it does not protect the camera
Question:	Does the outer edges have a rubber grippable surface
Answer:	yes. the back is hard plastic and the lower sides are the same hard material, but the silicone/rubber soft/grip-able material comes through near the top half on the side w/ the power button. also, if the phone were to land face down on a desk/floor, the rubber protrudes around the edge/rim to absorb that kind of drop/shock. sometimes I curl/warp my fingers around and get some traction on that surface, too.
Question:	Doesthis ork for the plain motoz
Answer:	Yes it does.

Product features

OtterBox Commuter Series Case for Moto Z3 Play

Protect your device with the slim and tough Moto Z3 Play/Moto Z3 Commuter Series Case. A compact case that keeps your phone safe while you live life on the go. Slip Commuter Series into your pocket and never miss a call, tweet or text.

Features

• Slim design: sleek profile easily slips into pockets and purses
• Dual-layer: soft inner and hard outer layers absorb and deflect impacts
• Port covers: block out dust, dirt and pocket lint

Product description

Q1: How to install the phone case?

STEP 1.Please open Silicon Button which near the Volume button to remove the outer silicon layer.

STEP 2.After removed the outer silicon cover,then open 2 key buttons on the side of the plastic case step by step to put your phone in.

STEP 3.Finally,install it back.Check all the button buckled well.

Features

-100% Brand New and good quality

-Durable 3 layers design, it come with Hard Plastic case + Silicone skin cover combine as one.

-Easy installation: No tools required to install.

-Perfect fit for your Motorola Moto Z3, Z3 Play Smart Phone.

-Conveniently designed to provide quick access to all touch controls, features, and ports.

-Access to all buttons and controls, no need to remove when charging, plugging in, adjusting volume or switching on/off

-Full access to user interface, camera lens, headphone jack, speakerphone and microphone

-Secure snap-on back case while Easy to remove

Package Includes:

1x Case Cover for Motorola Moto Z3, Z3 Play

Warm tips:Please checked your phone model before you purchased

• Perfectly Fit Motorola Moto Z3, Z3 Play
• Built in Screen Protector & Camera Protection: With built-in screen protector to keep screen from scratching. All the 4 corners camera hole and includes raised edges and a silicone lip to keep the screen from scratching or touching the ground
• Provides full access to phone ports, functions and sensitivity. including all buttons, camera, headphone jack, speakers, microphone and charging port. Simple, elegant, functional,classic colors, and lasting protection
• Rugged,Dual layer protective case with poly-carbonate hard shell exterior and flexible TPU inner Core protecting against sudden drops and falls,protects your device against impacts and bumps without damaging the device.Built for heavily use and outdoors.NOTE: please remove blue sticker from the inside of the case.
• Quality Assurance - Annymall service ensure a 30-day free return and 180-day free replacement, if the product has any quality problems, please don't hesitate to contact us at the first time

User questions & answers

Question:	Does it do a good job at protecting the camera? My last case left it wide open and it broke the lens
Answer:	You can't really cover the camera with a case since it will hinder the camera's ability to take good pictures. That being said, the case is raised enough to protect it from accidental flat drops. Although if there is a small hard objects directly on the camera where the phone drops, then it is just bad luck.
Question:	The picture doesn't show the moto z3 is it actually for the z3 (circular camera
Answer:	Yes, it's for the Z3 with the circular camera. I still have this cover on my phone (I do a lot of ground work and need a good protector against scratching and dirt/dust). This cover gives a good protection but the dust gets in and it makes the touchscreen a pain to work with. I don't think I would buy this again. I give it maybe 2 or 3 stars out of 5.
Question:	Does this fit a Moto Z3 with finger print
Answer:	Yes, it fits a Moto Z3 with finger print
Question:	The title says for moto z3, down farther it says moto z4. Which is it
Answer:	Perfectly Fit Motorola Moto Z3, Z3 Play

Product description

Features:

Ring Bracket Holder- Rotate 360 degree swivel ring wear on your finger make the phone not easy to fall down from your hand wherever you are, and the swivel ring can be used as a kickstand in need to make you hand free

Slim Fit and Lightweight- Ultra Slim Thin and lightweight protective layer give the case portable, easy to carry

Material- Durable TPU and hard PC provide the best anti-slip and anti-scratch

Precious Cutting- Includes responsive button covers with crisp feedback, precise cutouts

Belt-clip holster- it can be hung on your waist when you do some sports

Tips- We strongly recommended to use it with the vehicle bracket because of its magnetic back cover, it is so convenient and multifunctional



Package included:

1X Motorola Moto Z3 Play/ Moto Z3 Kickstand holder phone case

1 X Premium Nano Explosion Proof Soft Screen Protector

• Perfectly compatible with Motorola Moto Z3 Play/ Moto Z3 Only, (NOTE:PACKAGE CONTENTS 1 PACK Premium Nano Explosion Proof Soft HD Screen Protector)
• All round protection:Shockproof & Scratch resistant for small drops & raised lip edge protects the front screen and the camera. Soft TPU inner and delicate embossed texture anti-slip PC back
• Ring Bracket Holder- 360 degree swivel ring bracket holder can be attached to your mobile phone to provide a secure grip, so you will never drop it
• Kickstand Design- Built in kickstand is perfectly situated at an angle that allows for the optimum viewing position to meet your eyes
• Magnetic car holder: The piece of hidden iron on the case can easy to place you phone on the magnetic car holder.

User questions & answers

Question:	This doesn't have the opening for add on speaker
Answer:	No it doesn't. But I have no problem with hearing with internal speaker.
Question:	will it fit with the moto battery attached
Answer:	I don't think so because it fits snug on the back.
Question:	I need a replacement metal circle. Was not glued on good
Answer:	This isn't a question for someone who purchased one as well this is a request for a replacement why are you sending this to us
Question:	Will this work with z
Answer:	No. The buttons are in a different place

Product description

Features:

1.100% Brand New and good quality

2.Material: Silicone & Polycarbonate(PC)

3.The 2 piece shock absorbent frame is made of a hard outer PC (polycarbonate) shell and inner silicone case supplying double protection from scratches, bumps, dirt, grease, and fingerprints

4.Access to all buttons and controls, no need to remove when charging, plugging in, adjusting volume or switching on/off

5,Easy installation, no any tools required to install

6.Lightweight design perfectly fits your phone, does not make your phone look bulky

7.Secure snap-on back case while Easy to remove



Compatible with:

Motorola Moto Z3

Motorola Moto Z3 Play

Motorola Moto Z Play 2018



Package Includes:

- 1 x njjex Motorola Moto Z3 Play/ Moto Z3 Case in Retail Package

• ✦Njjex Dual Layer Armor Rugged Case for Motorola Moto Z3/ Moto Z3 Play / Motorola Moto Z Play 2018, Perfectly Fit AT&T Sprint Verizon T-mobile Tracfone, MetroPCS, Virgin, Boost International unlocked Cricket U.S. Cellular Straight Talk All Carriers .
• ✦Dual layer protective design, Inner silicone to absorb shocks and impact outer hard PC material, rugged back texture provides better grip preventing slips and falls. Protect your device from scratches, drop, bumps, dirt, grease, and fingerprints
• ✦Ergonomic Grip Designed For a Secure Yet Comfortable Grip Of Your Phone, Full Access To User Interface, Camera lens, Headphone Jack, Speakerphone And Microphone.
• ✦Slim lightweight design with easy snap on/off installation fits your phone securely. Raised edges protect the screen and camera when the device is placed face down.
• ✦Non slip grip - keeps phone safe from drops with its comfortable easy grip / non slip contour. Full front and back protection with a beveled, textured back and raised edges.

User questions & answers

Question:	Will a popsocket stick to this case
Answer:	I think popsockets are to stick to smooth surfaces. This protector has a slightly bumpy surface. I've not tried it personally cause I don't like popsockets
Question:	Can you put on the moto mods with the case on it
Answer:	I don't have moto mods so I'm not sure
Question:	is the Rose color more magenta/hot pink or dull red or red and is the pink a light pink or a dull pink
Answer:	Rose Red color is more magenta/hot pink and the Pink color is a light pink.
Question:	Is there decent protection for the screen
Answer:	I would say there is decent protection but I put on a screen cover for good measure.

• Specially Design for Moto Z3 PLAY / Moto Z3
• The Aegis Series case fully complements the device without sacrificing the look of your device
• Full-Body Armor Protective case Covers all 4 corners and the Front Cover and Built-in Screen Protector will protect your device screen from scratching the surface.
• Constructed of high-quality flexible TPU layer and polycarbonate layer protects your device against impacts and bumps without damaging the device.
• Precise cutouts for camera, buttons, and speaker

User questions & answers

Question:	Is the screen protector plastic or glass
Answer:	Plastic. I took mine out and put a glass on in. It's easy.
Question:	Can you use moto mods on this case
Answer:	No unfortunately not, it is totally sealed and thick case even though the mod area is open.still a rugged case. Not a quick on off case either.
Question:	will this fit my moto z
Answer:	Yes.
Question:	Will this fit a Z
Answer:	No, Z3 and Z3 Play only.

Product features

Compatible List

• Moto Z3 PLAY
• Moto Z3
• 2018
• All Carrier

Kickstand / Screen-In & Screen-Out

The belt-clip also offer the same feature as kickstand and the 360 degree rotatable feature allows you to adjust the stand to your desire viewing angle.

Built-In Screen Protector

Case comes with built-in screen protector. Please be sure to remove the blue protecting film on the inside the front plate before installing.

360 Degree Total Protection

Full-Body protection to provide extreme shock absorption keep device safe from accidental drops.

Rotatable Clip Holster

Holster to keep phone handy also the same feature as kickstand and the 360 degree rotatable feature allows you to adjust the stand to your desire viewing angle.

Product description

Description

The Karbon Shield is designed for the sophisticated professional. It’s a simple protective and flexible case that is made up of a new design DNA that blends the aesthetic texture of carbon fiber in a protective X-form TPU Shell. The carbon fiber personifies performance and lightweight utility. The case is designed for a seamless user experience with the finger grips on the back helping to secure the case safely in your hands. The carbon fiber texture protects from scratches and nicks which help maintain the clean and sophisticated outlook. The buttons are raised and are quality tested to provide a good tactile feel while clicking. Each corner of the case is designed with revolutionary tactile corner impact protection that makes sure that the corner of the device doesn’t come in contact with the ground when dropped. We were able to achieve this with no extra bulges and keep the design clean and sophisticated. The case is simple and yet completely useful. This has always been Poetic’s core DNA and feature driven design methodology.



Compatibility

Compatible with Moto Z3 Play / Moto Z3.



Materials

TPU Skin.



Product Contents

1x Poetic Karbon Shield Series TPU case.

• SLIM FIT - Form-fitting TPU case with a slim profile and carbon fiber texture.
• SHOCK ABSORBING - Impact resistant TPU absorbs and dissipates shock.
• GRIP - Rear pattern provides a grip area to handle the device.
• SCREEN PROTECTOR FRIENDLY - This case is compatible with tempered glass and wet install screen protectors.
• COMPATIBILITY - Compatible with Moto Z3 Play / Moto Z3

User questions & answers

Question:	How is the grib? Is it slippery
Answer:	No, it"s not. It has a good grip, considerando that others i tesred were a lot more slippery.
Question:	Can this case be used with a wireless charger
Answer:	Do not know do not have a wireless charger best thing to do is to ask the company that manufactures the Moto Z3 play
Question:	Does the back of the case stick out further than the camera to keep the lens from scratching
Answer:	Johnson and Graff have it wrong. The rear camera ridges extend at least 0.5 mm above the camera lens, as can easily be measured by placing a straight edge across the ridges
Question:	will the case fit with the power pack
Answer:	It is unrealistic to expect that you will find a 3rd party case that works with Moto mods. Firstly, there are several different mods of different sizes - I personally have the battery extension pack and the 5G add-on, both of which would require different cases. Secondly, it is bad practice to keep (for example) the battery pack permanently connected to your phone. The mods are intended for specific use cases (back-up charge, speakers, 5G access, ...) and not permanent attachment. Just sayin'...

Product description

The Rugged Armor packs a whole lot of style with daily drop defense. The Rugged Armor bears its carbon fiber detailing against an all matte black finish. Every corner is packed with Air Cushion Technology for optimum shock-absorption.

• Resilient Shock Absorption and Carbon Fiber Design
• Flexible TPU case with interior spider-web pattern & raised lip to protect screen
• Air Cusion Technology for shock absorption
• Tactile buttons for solid feedback and an easy press
• Moto Z3 Play Case Compatible with Motorola Moto Z3 Play (2018)

User questions & answers

Question:	It looks like there are 2 cutouts on this case.....why would there be another cutout for what appears to be the motorola logo
Answer:	I think there might be some heritage in that design decision. The original Moto X (2013) had an "indent" just slightly above the middle of the back that seemingly everyone praised for making it easier to hold. So did the Moto X (2014), and the Moto X Pure Edition after that. While the Moto Z3 is flat at the "M" logo", maybe the case designer thought that making it's own indent would appeal to legacy Moto owners? Or aid in holding the phone?
Question:	Does this case sit flush with the camera bezel
Answer:	Yes. And there are small raised ”bumpers” at each corner so when you lay the phone on its back the camera isn't a contacting surface.
Question:	Does this case have a rubberized grip to prevent the phone from slipping out of your hands
Answer:	this case has enough grip to keep the phone not slip from your hand. I feel my phone is complete with this cover
Question:	Will the case fit with the Z3 play extended battery attached
Answer:	No, but they have something you can get called a bumper to protect your phone and still use the extra mods..it just goes around the outside edges and if you look for the right one you can find a bumper with soft grippy parts on it so you are less likely to drop your phone

• Compatibility: Rome Tech phone carry case with belt clip designed especially for Motorola Z3 / Z3 Play / XT1929 protection - NOT suits for any other models
• Shockproof Cover: Heavy Duty Moto Z3 belt clip case holster made of rugged material and have a rubberized texture that defends the device from hard drops and scratches
• Simple Fixate: Rotating Moto Z3 shell and holster on your belt, waistband, or pocket - change the angle of the holster up to 180 degrees with the durable swivel
• Bulit-in Stand: Moto Z3 case with kickstand provides freedom to view content on your cell phone hands-free - Enjoy vertical or horizontal angles fixation
• Easy to Use: Free access to camera, charging ports and buttons - remove cell phone from holster without removing from Moto Z3 clip-on phone case

User questions & answers

Question:	what protects screen out of holster
Answer:	Hello, Yes, this Rome Tech Moto Z3 / Z3 Play protective phone case has extended edges that go over the screen and protect it. Regards, KetGet Store
Question:	Will this case wotk with a back cover on the phone
Answer:	No, it will not work with a back cover on the phone.
Question:	I assume you have to remove the cover to attach moto mods
Answer:	Hello, Yes, this Rome Tech Moto Z3 / Z3 Play protective phone case must be removed in order to attach Moto Mods. Regards, KetGet Store

Product features

THE PROTECTION YOUR MOTO Z3 / Z3 PLAY EAGERLY NEEDS!

This accessory best suits to save your Motorola Moto Z3 from any accidental drops during walk and everyday casual scratches. It's time to enjoy your Moto Z3 without worrying about serious breaking or damaging. Feel more comfortable using and sharing your phone with children, parents or friends anywhere. Case design provides instant access to camera, buttons, speakers and ports - you don’t need to take off cover during use

MULTIPLE ANGLES

Time to use your Motorola as never before. Ratcheting сlip holster can be easily fixed on your belt, bag, waistband or pocket. Swivel allows you to change angle up to 180 degree

ERGONOMIC DESIGN

Thanks to thoughtful case design phone easily slides in and out of holster. Remove your phone from holster without removing it from case. This feature reduces the chance of an accidental fall

HANDS-FREE VIEWING

Specially for movie and series lovers we built in the case durable kickstand. It allows you to fix your phone in vertical or horizontal angles. Play, watch and read with your Moto Z3 hands-free

360 PROTECTION

Impact absorb technology saves your Motorola from any shocks or scratches. Enjoy full protection from any impact for many years.

PRACTICAL APPROACH

Built-in kickstand provides extra functionality and convenience for your activities. Use it free at work, at lunch or anywhere you need

CHILDPROOF SOLUTION

Rome Tech ruggedized case built to be durable against child use Don't worry about sharing your Motorola Z3 with kids ever again

SIMPLE ACCESS

Precision design for quick access to slots, ports, and all buttons. Case designed with non-slip texture to give you the best grip.

Smart Case for anyone who value multi-functionality

Rome Tech case for Motorola Z3 best suits for people, who choose functionality. It's a durable accessory that provide not only device defense. In addition, it extends the functionality of your phone - makes use more convenient and practical. Also holster case will look great on your belt. It will look much more aesthetic than a phone with common case in your pocket. Accessory is quite easy to use - you get used to belt clip case quickly. It might be great present for your parents, work associates or close friends.

Compatible with:

• Motorola Moto Z3
• Motorola Moto Z3 Play

Product description

Compatible with the new Motorola Moto Z3 / Moto Z3 Play released in 2018, Moto Z Play 2018 (Third Generation) . ***Will not be compatible w/ any other Moto Z models.***

• Specifically designed for the 2018 Motorola Moto Z3 Play (Sprint, U.S Cellular), Moto Z3 2018 (Verizon), and unlocked Moto Z3 / Z3 Play / Z Play 3rd Generation for all carriers) not compatible w/ any other Moto Z models. Please see picture for reference of correct phone model compatibility.
• TWO PIECE HYBRID COMBO CASE: Case w/ built-in stand and holster made of rigid plastic, rubber-like feel for a non slip grip
• CONVENIENT DESIGN: May be removed from holster without removing case
• MULTI-FUNCTIONAL: Holster clip swivels 180 degrees w/ sturdy locking mechanism
• PERFECT FIT: Full access to all ports and buttons when using phone case

User questions & answers

Question:	is a case and holster available for a moto z
Answer:	Hello, We do have this style holster combo case for the Moto Z4 also. Please see link: https://www.amazon.com/dp/B07SPG1J4F?ref=myi_title_dp Thank you for your interest in our products!
Question:	Does this case for the regular moto z3? "Not the moto z3 play
Answer:	Works on my Moto z3, I don't have a Moto z3 play.
Question:	Does this case work with the extended battery back
Answer:	I'm sorry, I don't know for sure but the description does mention that it works for the Z3 and the Z3 play so I would assume it does but I'd ask the supplier first before purchasing.

User questions & answers

Question:	Will this fit the z
Answer:	Sorry , it will not Cause this case designed for Motorola Moto Z3 Play / Moto Z3, not fit for Moto Z2 Play Hope for your understanding
Question:	Does this case cover the charging port to protect from dust
Answer:	No it doesn't only when you have the 2peaces together like when you have it clipped to your belt
Question:	Bought the zenic heavy duty shockproof case for moto z3 but the hard shell with the belt clip doesn't fit . why
Answer:	I bought this one: Moto Z3 Play Case, Moto Z3 Case, Zenic Heavy Duty Shockproof Full-Body Protective Hybrid Case Cover with Swivel Belt Clip and Kickstand for Motorola Moto Z3 Play (Purple). Sold by: ZENIC Tech. It fit my Moto Z3 just fine. Put the inside piece on BEFORE putting the outer shell on.
Question:	Will this case work with the battery mod
Answer:	No it will not even though it's open but the mod won't fit I have a projector and well I just took case off and left it off

Product features

Zenic Heavy Duty Shockproof Full-body Protective Hybrid Case Cover with Swivel Belt Clip and Kickstand for Motorola Moto Z3 Play

Moto Z3 Play Case: This 3-in-1 designed hard rugged case exterior with TPU interior, equipped with kickstand and belt clip, firmly secure your device with an industrial hard composite plastic mold, it is also built to be easy to snap your device in and out of the mold

Features:

1. The built-in locking kickstand and the 180-degree swivel belt clip are very convenient for you to carry or watch vedios, facetime and so on
2. 100% Brand New and good quality
3. Precise Cutouts: Perfect match and fit for your phone that also retains easy access to all functionalities, including all buttons, camera, headphone jack, and charging port
4. The heavy duty case can protect your phone from Scratch, Dust, Dirt, Shock, and Drop Damage
5. Variety of color combinations to make your own style
6. Note: Easy installation and disassembly without tools, just snap on the phone
7. How to install: Open the package and get the case out Take off the belt clip Put the phone into the back case tightly Then install the belt clip Adjust the degrees of the belt clip until you feel ok Congratulation, you done it

Three Layer Protection:

Features:

Rotating Belt Clip Swivel allowing for multiple positions

Product description

About us: We specialize in the manufacture and sale of high quality cellphone case . The products we provide are designed and manufactured with a mind-set to maintain the highest quality standards. Simple and clean cellphone cover against scratches to give your best protection. Decorate your phone with unique style.

〈br〉1.Features:

.Drop Protection

.Scratch Protection

.Dust Protection

.Non-Slip Protection

This Dual Layer hybrid Defender Armor case provide stylish and dual layer protection for your new mobile phone against abrasion, scratches, dirt, dent, and damages.and anti-fingerprints protection. Full access to all ports, buttons, and cameras on the phone without the need to remove the case. Simple snap-on design for easy installation and removal.



Our products have been well tested, examined and packaged before sending off.We guarantee the quality of item.If for any reason this product fails to perform as you think it should, or if you simply don't like it, just return it to us for an exchange or a full refund



2.Packaging including

One New Phone Case

3.Feedback

Any question for your order .We will reply to you within 24 hours and give you a satisfactory answer.your satisfaction is my effort.Thank you!

Our products have been well tested, examined and packaged before sending off.We guarantee the quality of item.If for any reason this product fails to perform as you think it should, or if you simply don't like it, just return it to us for an exchange or a full refund

Notice: Yiakeng case is the brand owner of Yiakeng product, Yiakeng Trademark is protected by US Trademark Law.we never authorize any third party sell our product in US, please make sure you buy authentic product from Yiakeng,We will provide manufacturer warranty and super customer service,thanks!

• Moto Z3 Case, Moto Z3 Play Case, Yiakeng Dual Layer shockproof wallet Slim Protective With kickstand Hard Phone Case Cover For Motorola Moto Z3
• The Moto Z3 Case is sturdy, easy to apply and remove, but not bulky or heavy to handle.The colors are bright ,It is so sturdy and protects Your phone perfectly.Moto Z3 Case have provided more grip in hand,phone are gripped are not somewhat slippery,Fit is perfect no play and easy to get on and off.the phone feel secure if dropped
• The design and functionality was okay,positive is the buttons line up pretty well, and are easy to operate.the Moto Z3 Case kick stand is handy!The stand is an added bonus for when you want to watch a video.
• Provides ample traction so that your phone no longer slips out of your hand. It fits perfectly with all of the openings for the camera and speaker, etc in the right places.it protected phone when you dropped it ! It can protect the phone from being scratched scratches or marks on the case and protect the phone from minor falls
• this is a good case as It provides a good protection for the phone and avoids the phone sliding on a surface like some flat backed ones may,perfect charger & phone jack cut outs,solid and lightweight with decent grip

User questions & answers

Question:	Why can't I charge my phone omy car with this cover
Answer:	I have no problems charging my phone with this case on.
Question:	How does a case measuring 5.2 fit a phone that is 6.13? Wanted this case til I saw that
Answer:	Dear ,the product size is wrong . this phone case is fit for moto z3 or moto z3 play ( 6.16 x 3.01 x 0.27 inches), thanks!
Question:	Are the on/off, volume buttons easy to press. Some cases are hard pressing on the buttons
Answer:	Yes! Very easy access - there are buttons on the case that push into the buttons on the phone - it works great and the kickstand is very sturdy, as well
Question:	Why is there a hole in the back where the magnet is? I didn't realize this when I purchased it
Answer:	There's actually 2 openings in the back..one for the camera and one for the optional mods.

Product description

Moto Z3 Play Case,SENON 2 in 1 Hybrid Dual Layer Shock-Absorption Protective Cover Shell for Motorola Moto Z Play 3nd Gen 2018



Product features

1.The 2 piece shock absorbent frame is made of a hard outer PC shell and inner TPU case supplying double protection

2.Protects your mobile phone against scratches, dirt, grease, fingerprints and other daily damages.

3.Precise cutting of camera,volums and speaker, side button cover by case,but easy to access.



Pack Includes: 1* Case



Need Help? (Contact Us):

Log in Amazon account-find the order-click "Get help with order"-choose specific subject-click "Ask Seller".

• Compatible with Designed specifically fit Motorola Moto Z3 Play 2018 Release
• Hybrid double layer of TPU and polycarbonate gives your phone great protection
• Features high impact protection, durable, neat edge and unique simple attractive design,easy snap-on installation allows for quick usage
• Raised bezels protect screen and camera from surface contact
• 90 Days warranty: replacement or money back if any happens to our products during the period of warranty;service goal:100% customer satisfaction

User questions & answers

Question:	Is this case textured? Can i use a popsocket on it
Answer:	The case has a rubber feel to it, making it much easier to hold than the phone alone. It doesn't seem textured textured, but I've never tried to use a popsocket.
Question:	why is there a cut-out for the motomod magnet? when any mod won't work when this case is on the phone
Answer:	Lol!! I wondered the same thing. Have to take the case off to put any mods on it.
Question:	Is this case textured? Can i use a popsocket on it
Answer:	Not textured popsocket can be used on it.
Question:	I read one review that says the cut out for the charger is not correct; anyone else having this problem? Any other cut outs a problem? Thx in advance
Answer:	I have this case and I do not have any issues with any of the cut outs, including the charger. They are all in the correct spots and the case is very nice.