3 best iphone 6 plus protections

• Made in USA and Imported
• WORKS FOR iPhone 8plus/ 7plus/6sPlus/6Plus (5.5 Inch Screen)only.{NOT FOR iPhone 8 and 7 4.7 inch display] 0.33mm tempered glass screen protector. Featuring maximum protection from scratches, scrapes and bumps.
• Specialty: Due to the rounded design of the iPhone 8plus/ 7plus/6sPlus/6Plus, and to enhance compatibility with most cases, the Tempered glass does not cover the entire screen. HD ultra-clear rounded glass for iPhone 8 plus/7 plus (5.5 Inch Screen) is 99.99% touch-screen accurate.
• 99.99% High-definition clear hydrophobic and oleophobic screen coating protects against sweat and oil residue from fingerprints.
• It is 100% brand new,Precise laser cut tempered glass,no front camera cutout , exquisitely polished,2.5D rounded edges.
• Online video installation instruction: Easiest Installation - removing dust and aligning it properly before actual installation,no worrying about bubbles,enjoy your screen as if it wasn't there.

User questions & answers

Question:	does this fit Iphone 8 plus
Answer:	The comments elsewhere that the protector fits perfectly is misleading for the IPhone 8 Plus. If you don't use an Iphone case there will be a gap around the edge of the protector and if you do use a case there may still be a gap depending on the lip dimensions of the case. It would be helpful if Amazon provided the dimensions to take the mystery out of this problem.
Question:	Can there be air bubbles
Answer:	it takes special skills to install a screen protector without bubbles. Here is my recommendation: Purchase at least 10 of these sets (30 screen protectors in total), and practice, again and again. Follow the instructions. Eventually you will end mastering the technique. Just keep doing it until you are fully satisfied.
Question:	How do you get it to stick to the screen
Answer:	Dear buyerhere are the steps of installing the screen protector:1. clean the screen of the phone with the supplied wet wipe and dry wipe, make sure there are no stains or microfibers on the screen2. stick the two guide stickers on the lower left corner and the upper right corner respectively 3. peel off the glass screen protector carrier before install the tempered glass screen protector on your phone4. align the screen protector perfectly by using the two guide stickers, and then press the sheet down5. carefully press the glass screen protector with your fingers to make it fit the screen perfectly (a ruler or a credit card can help you with the bubble）I hope the above information is helpful
Question:	Is there a cutout for the camera
Answer:	Dear buyer, There is no cutout for the front camera, this item is designed in this way, but after repeated testing, this will not influence the usage of it I hope the above information is helpful

Product features

Frequently Asked Questions:

1.The flexibility of the Glass Screen Protector is just the same as the plastic material,Is it made of tempered glass or plastic?

This screen protector is a real tempered glass.The plasticly flexibily is the exact reason why we call it tempered glass screen protector.Tempered or toughened glass is a type of safety glass processed by controlled thermal or chemical treatments to increase its strength compared with normal glass.

2.It can't tell it's Glass or Plastic by the appearance and we don't have the high-tech laboratory equipment at home, so what could we as a customer do to identify it?

Well,there does have one simple,quick and cost-effective way to run a test all by yourself, and it's supper accurate.as the basic scientific fact, the Melting Point of most plastic at between 160 and 210 degrees Celsius while the glass material is at least over 1400 degrees Celsius,so is there a lighter around?

3.Does it come with a cleaning wipe to use prior to placing on the phone?

Yes,the package includes: 6*Guide Stickers, 3*Wet Wipe&3*Dry Wipe,3*Dust Absorber

4.Does the screen protector cover the whole screen? Why is it smaller than my iPhone's screen?

Due to the rounded edge of the iPhone design, and to enhance compatibility with most cases,the tempered glass does not cover the entire screen. It is effective for preventing bubbling and peeling at the edges. If you prefer a screen protector that covers the whole screen, we highly recommended our Full-Coverage Screen Protector.

5.How can I remove bubbles?

Before placing the screen protector,please first clean the screen by using kits in the package.If there are bubbles, please try to press the bubble by using your finger with a little force,and try to use a ruler or a credit card to help you with the problem,but a thin cloth pad is needed on the surface of the screen to avoid scratches the protector.

6.How can I remove a cracked glass screen protector?

Lift the screen protector with the card from any corner of the screen protector. Once the corner has been lifted off the device, hold the corner and remove slowly.( If you would ever find CHIP or CRACK on screen protector, for your safety, please wear glove to remove screen protector gently to avoid any possible further damage or injury)

7. Why does the screen protector have a white edge?

If for some reason you receive a screen protector with a defect or other issue, please let us know ,we will help you immediately.

The iPhone has 2.5D curved edges around the screen, but due to inconsistencies in production, not all iPhones have exactly 2.5D curved edges. There are indeed slightly difference on the curved edges of different iPhone from different manufacturers. However, all Ailun's screen protectors are strictly produced to fit a 2.5D cured edge. As a result, you might find the white edge around your screen protector. In this situation we recommend our Full-Coverage Screen Protector

Product description

Please Note: iPhone 6 Plus / iPhone 6S Plus screens has curved edges that our screen protectors do not cover 100%, as they would peel over time causing customer frustration. We designed our screen protectors so you will have maximum coverage on your device with ease of installation and durability. For more complete protection, we recommend pairing the screen protector of your choice with a iPhone 6 Plus / iPhone 6S Plus.

Mr Shield Screen Protector Kit Includes:

-Tempered Glass Screen Protector

-Instructions

-Scratching Card

-Cleaning Cloth

-Dust collecter

-Removing tapes

Mr Shield screen protector Features:

-100% bubble-free silicon adhesives

-99% highest transparency

-9H HARD-COATED scratch resistant protection

-0.3mm Ultra Thin

-All 2.5D Round Edge

Mr Shield lifetime replacement:

We will send you replacements free of charge for:

-Installation problem such as bubbles or other user error

-Damaged screen protectors

-Does not fit your device

• Include 3 PCS Tempered Glass Screen Protector specifically designed for iPhone 6 Plus / iPhone 6S Plus
• From scratches to high impact drops, you are protected with Mr.Shield HD Clear Ballistic Glass
• Precise laser cut tempered glass made with polished, rounded edges. 99.99% HD Clarity and Touchscreen Accuracy
• Protected by Mr.Shield No-Hassle Lifetime Replacement
• Please Note: iPhone 6 Plus / iPhone 6S Plus screens has curved edges that our screen protectors do not cover 100%, as they would peel over time causing customer frustration. We designed our screen protectors so you will have maximum coverage on your device with ease of installation and durability. For more complete protection, we recommend pairing the screen protector of your choice with a iPhone 6 Plus / iPhone 6S Plus

User questions & answers

Question:	will this fit a iphone6s
Answer:	Yes. That is the phone I have and it fit perfect.
Question:	Está grueso el cristal
Answer:	Is perfect
Question:	Does this fit an iphone 6splus? i previously ordered from a different seller and it was way to small for a 6splus
Answer:	Yes it fit my IPhine 6plus. It does not go all the way to the edge but fits like ones I've had applied for me before at retail stores.
Question:	How do I get my lifetime replacements
Answer:	My iPhone 6s plus has appeared to have a small tear that continues to get worse, there the also a bubble beginning to develop at top of screen. Will I be able to get lifetime replacement

Product description

The Rugged Protection OtterBox DEFENDER Case for iPhone 6 Plus and iPhone 6S Plus (ONLY) provides heavy duty protection against drops, dust and damage without taking away from the usability of your phone's features. The Defender Series case offers triple-layer protection and is built from a high-impact polycarbonate shell, durable silicone slipcover and a built-in screen protector, making it one of the toughest cases on the market. Why else do you think we called it the Defender Series?

• Compatible with iPhone 6 Plus and iPhone 6S Plus ONLY - Case ONLY - *** Holster Not Included ***
• Robust, 3-layer protective case, with a built-in screen protector, withstands scratches, drops, bumps and shock.
• Defend your device from drops, dirt and daily adventures
• 3-Layer Protection - Port covers keep out dust and debris
• New in Bulk Packaging and 100% authentic

User questions & answers

Question:	does this one have a cover for the finger print spot
Answer:	Yes, it does! However, I found it to be very annoying as my fingerprint scanner wouldn't recognize my finger, even after trying to reregister it with the cover on. I ended up removing it manually, which solved that issue but might allow dust etc inside the cover.
Question:	Why is the packaging generic brown box? Is this a legit otterbox
Answer:	The one I got was real...!
Question:	What is the return policy
Answer:	I do not know this eirher
Question:	What size phone does this fit
Answer:	The offer a variety of models to fit different types of phones. Have always had them for my kids phones and any time we did NOT have one, we had problems from phones being dropped. Honestly they are the best outer protection.