11 best cases primes

Product description

We've made our iconic H series PC cases even better Our new lineup still features the elements builders loved in the original H series, including our patented cable management system, removable fan/radiator mounting brackets and easy-to-use drive trays alongside new updates like a front-panel USB-C connector supporting high-speed USB 3 1 Gen 2 devices A tempered glass side panel that installs with a single thumbscrew and an upgraded Smart Device V2 on the H710i.

• New features: Front I/O USB Type-C Port, Vertical GPU Mount, Tempered glass side panel with single screw installation, and upgraded Smart Device V2
• Smart device V2: Includes a faster microprocessor for NZXT Cam-powered control of two HUE 2 RGB lighting channels and 3 fan channels that support either voltage regulated or PWM fans
• Vertical GPU mounting: Show off your graphic card with a Built-in mounting bracket for installing your GPU vertically PCIe riser card not included
• Enhanced cable management: Our patented cable routing kit with pre-installed channels and straps makes wiring easy and intuitive
• Motherboard support: Mini-ITX, MicroATX, ATX, and EATX

User questions & answers

Question:	hola tengo este mismo chasis pero el vidrio se me quebro donde puedo comprar un nuevo vidrio
Answer:	Si, con las misma medidas
Question:	Does this support 240mm 2x120 radiators
Answer:	Yes it does.
Question:	Random question: how are you supposed to install the top fans? i left the bracket as-is and screwed the fans underneath. do i have it backwards
Answer:	you can unscrew the top bracket just like the front and it comes completely off and you can put the fans in the top of the case where you cant see them when you look though the glass. the previous statement that the top only holds 1 fan is not true it fits 3x 120mm fans and 2x 140mm only the h510 and smaller has a single top mount, but the 710-710i is a bigger atx case
Question:	How many fans can I install h
Answer:	Lets see, if I remember correctly.... Fan Support: Front: 3x 120/ 2x 140mm (3 Aer F120 Case Version included) Top: 3x 120/2x 140mm Rear: 1x 120/1x 140mm (1 Aer F140 Case Version included) Fan Specs: Aer F120 (Case Version) Speed: 1200 ± 200 RPM Airflow: 50.42 CFM Noise: 28 dBA Bearing: Rifle Bearing Aer F140 (Case Version) Speed: 1,000 ± 200 RPM Airflow: 68.95 CFM Noise: 29 dBA Bearing: Rifle Bearing Radiator Support: Front: 2x 140 or 3x 120mm with Push/Pull Top: 2x 140 or 3x 120 Rear: 1x 120

Product features

H710i

The mid-tower H710 and H710i ATX cases are a builder’s dream with plenty of space for almost any build. There are two 360mm radiator locations (top and front), seven 120/140mm fan mounts, a removable/repositionable 3+1 3.5” HDD cage, five 2.5” drive trays, and front USB 3.1 Gen 2 type-C for a truly epic system.

SMARTER (i VERSION ONLY)

The H series features design improvements including a re-designed SSD tray, flush tempered glass mounting and numerous fine adjustments for a smarter build experience. The new Smart Device V2 includes a faster microprocessor providing NZXT CAM-powered control of two HUE 2 RGB lighting channels, and three fan channels that support either voltage regulated or PWM fans.

MORE MODERN

With a USB 3.1 Gen2-compatible USB-C connector on the front panel, it’s easier than ever to connect smartphones, high-speed external storage, or the latest peripherals to your PC.

STILL BEAUTIFUL

The clean, modern design, iconic cable management bar, and uninterrupted tempered-glass side panel showcase your stunning build.

• 【Perfect Fit for iPhone 11】: This case is perfect fit for iPhone 11 6.1 inch. It support wireless charging without taking off case. It is perfect iphone 11 case flower for use.
• 【Soft TPU materials 】：Flexible and soft TPU silicone bumper, makes it easy to install and remove the case. Precise cut hole for cameras, speakers and other ports.
• 【360° Full Body Protection】: For iPhone 11 phone case, Stylish design with full body protection and cushioned corners can prevent your phone from accidental drops, bumps, dust and scratches.
• 【Touch-sensitive Built-in Screen Protector】: The iPhone 11 with screen protector is coming with a Touch sensitive built-in screen protector, which makes easy to use the touch screen, ideal for play games, listening to music or surfing the internet.
• 【Slim Fit Design】: Slim fit Design makes it pocket-friendly. Elegant marble patterns makers your phone look sleek and stylish, If you have any questions about the phone case, please feel free to contact us, we will provide you with a satisfactory solution, we value every customer's information!

• Crystal Clear and Anti-yellowing: Using high-grade german TPU and PC materials our case is made to be anti-yellowing, won't get oily when used and stays clear over time.
• Shockproof Military Graded Protection: Our case features corners that are made using US military graded processes that are able to absorb pressure when dropped and protects against scratches.
• Camera and Screen Protection: The edges of our case are designed to raise just enough to protect the parts of your phone that matter most.
• Made to Fit: Our case fits perfectly around your phone, leaving space for buttons and protects against dust.
• Lightweight and Easy to Carry: Our case is designed to be easy to carry, and keeps your phones original design intact.

• Shockproof designed allow you take all Switch accessories when go on a trip, foam padding interior securely hold all accessories in place and prevent them from moving around inside the case, bumps, scratches, and drops.
• Large capacity for storaging Nintendo Switch console, poke ball plus, dock, power adapter, joy-con grip even with extra joy-con, joy-con straps, HDMI cable, and game cards) and extra Switch Pro controller, Ultimate Edition Pro Controller.
• 21 cardbridge slots to store your game cards. Zipper large mesh pocket can store can hold the wall charger, USB cable, earphone Pen and stylus, zipper pocket keep accessories from fall out.
• Hard and sturdy exterior protects your Nintendo Switch system from drops, scratches, bumps, splash and dust. Soft micro fiber interior lining prevents the console and accessories from being scratched.
• Adjustable shoulder strap allow you carry it anywhere and release your hands, comfortable handle strap also make it convenient to carry. Ideal travel case to protect your Nintendo Switch and games while on the go. ( Carrying Storage Case Only, Nintendo Switch console and accessories are not included.)

Product features

Kootek Large Shockproof Travel Carrying Storage Case for Nintendo Switch

With this storage case, you can take all switch accessories with you when on the go, ideal for trips, transportation, camping, or outdoor activities. Hard shell and Internal EVA foam protect your devices from accidental bumps, scratches, or drops, keeping everything safe.

Large Capacity

It can keep all your stuff in a compact bag, such as Nintendo Switch console, poke ball plus, dock, power adapter, joy-con grip, even extra joy-con, cable, controller. Just enjoy your games!

Two-Way Zipper

Designed red and blue colors zippers match your Switch console, make your device look cool and fashion.

Comfortable Handle Strap

Soft and comfortable handle strap makes it convenient to carry.

Adjustable Shoulder Strap

Sturdy metal shoulder strap buckle allows you to carry your switch anywhere and release your hands.

Pre-Cut Compartments

The pre-cut slots can keep switch console and accessories in place securely and prevent them from moving around inside the case.

21 Cardbridge Slots

Total 21 game card holders, take your favorite game cards and play games with your friends.

Large Zipper Mesh Pocket

You can hold wall charger, USB cable, earphone, and stylus pen here. Ziplock pocket keeps accessories from fall out.

• 【Equipment compatible 】Compatible with iPhone 11 6.1 inch , not compatible with other devices.
• 【Design 】Lightweight and thin design provides protection without adding bulk to your phone.
• 【Upgraded Protection】The four-corner protection airbag design ensures your device has the highest shock-resistant level, which increases protection by 99%.
• 【Slim Design & Perfect Fit】This clear iPhone 11 case for women is customized for iphone 11. And it has special raised lips to protect the camera and screen.
• 【Scratch Resistance】This iPhone 11 phone case back is made of premium plastic, it is sturdy enough to prevent scratches.

User questions & answers

Question:	Is this iPhone 11 case bulky
Answer:	I felt the same. But was pleasantly surprised when we received them. To be honest they aren’t top notch but are still good quality for the price and have a zipped panel on one side which is great for organizing while packing.
Question:	Does it cover over the screen
Answer:	Yes! It fits perfectly. My son has had his on for a few months and it still looks brand new. Wonderful product!
Question:	Is it rubber or plastic
Answer:	it fits the ZTE Blade A3 Prime well, but that is different from ZTE Blade A3. different screen sizes and Prime has 2 LED on back instead of one
Question:	Can I use this case with a camera lens protector on
Answer:	seems to be tempered. the same seller sells a set of 2 screen protectors without the case. they are tempered and seem to be the same items.

• This clear case Designed for phone 12 case / designed for phone 12 pro case. Support wireless charging.
• Screen Protection: Raised bezels around the screen help protect against scratches.
• Shockproof Corners: This clear case has shockproof corners for dropproof protection.
• Slim and Clear: Keeps your phone slim and stylish with the original beauty of your 12/12 pro.
• Scratch Resistant: The back made of hard PC holds up to daily wear and tear.

Product description

ANTSHARE for Samsung Galaxy S21 Plus Case Waterproof, Built in Screen Protector Full Body Protective Shockproof IP68 Underwater Clear Case

* Main Features

1.Shockproof, anti-drop, anti-scratch, and effectively protect your phone security.

2.Precise shape for Samsung Galaxy S21 Plus , all buttons and controls such as front camera, camera, power button, volume button and charging jack, works great without any problems.

3.Case built-in scratch-resistant screen protector with high touch sensitivity. Can use the camera well and shoot good-looking photos and videos in high definition.

*Package Included

1* Waterproof Case for Samsung Galaxy S21 Plus

1* Cleaning Cloth 

1* Lanyard 

1*User Manual

• 【IP68 Waterproof】: IP68 Waterproof case for Galaxy S21 plus, tested submerged to 6.6 ft/1.5 m for 20 minutes.Perfect for water sports swimming snorkeling surfing and many outdoor sports.
• 【Compatible】:Only Compatible with Samsung Galaxy S21 plus 6.7 inch 2021 released,Completely fit in the speaker, buttons, sensors and cameras.
• 【Transparent Design】:The S21 Plus case’s Clear back design ensures HD clarity reveal the true color and beauty of your phone, and will not block Wireless Charging without removing the case.
• 【Full Body Protection】:360 Degree Protection Case for Samsung Galaxy S21 plus.Full Body Protective Built-in screen protector Case for S21 PLUS in all weather conditions.
• 【safe purchase】: We provide your Samsung Galaxy S21 Plus waterproof case 1 year warranty and 24/7 service, please review the user manual to ensure correct installation to make sure the case fully sealed. Contact us first if there's any problems.

User questions & answers

Question:	Can I use wireless charger with the case on
Answer:	Yes,you can use a camera lens protector with this case on
Question:	Is it actually waterproof
Answer:	No. It’s not expandable. But they do fit a fair amount.
Question:	Can fingerprint recognition be used normally
Answer:	The inside dimensions for small, middle and large size are about: 13.5 x 8.5 x 20", 16 x 10 x 24", 18 x 11.5 x 28"
Question:	Will this fit galaxy s21 plus 6.7 Inch 5G
Answer:	The largest one...maybex10 pounds

Product description

We’ve made our iconic H Series PC cases even better. Our new lineup still features the elements builders loved in the original H Series, including our patented cable management system, removable fan/radiator mounting brackets, and easy-to-use drive trays, alongside new updates like a front-panel USB-C connector supporting high-Speed USB 3.1 Gen 2 devices, a tempered glass side panel that installs with a single thumbscrew, and an upgraded Smart Device V2 on the H510i.

• New features: Front I/O USB Type-C Port and Tempered glass side panel with single screw installation
• Enhanced cable management: Our patented cable routing kit with pre-installed channels and straps makes wiring easy and intuitive
• STREAMLINED COOLING: Two Aer F120mm fans included for optimal internal airflow and the front panel and PSU intakes include removable filters, removable bracket designed for radiators up to 240mm - simplifies the installation of either closed-loop or custom-loop water cooling
• Motherboard support: Mini-ITX, MicroATX, and ATX

User questions & answers

Question:	I bought the h510 elite. my question is: do i need the hue 2 device if i decide to add an extra rear nzxt fan aer rgb 2? or i can use the smart hub
Answer:	Hello! No, you will not need the hue 2 device in order to add another AER RGB 2 fan. The included smart controller v2 will be able to accommodate up to 4 RGB fans in the system :)
Question:	Are the fans that come with this PWM fans
Answer:	No just 3 pin, non-controller-software-enabled. Plus you only get 2. Buy fans separately that are pwm and get 4 of them. There is room for two 140mm or smaller fans on the front and one top fan, one rear fan.
Question:	How much space is there in the back for cable management
Answer:	Plenty of space. best cable management i've seen
Question:	Does the h510 elite come with fans
Answer:	yes 2 exhaust fans one in the top one in the rear both 120mm, the top can be changed for a 140mm

Product features

H510

The H510 and H510i compact mid-tower ATX cases are both stunning and an excellent value. Perfect when you want a small-footprint ATX case without sacrificing features. A removable radiator mounting bracket, flush tempered glass window, multiple fan filters, and front USB 3.1 Gen 2 type-C are just some of the amenities.

MORE MODERN

With a USB 3.1 Gen2-compatible USB-C connector on the front panel, it’s easier than ever to connect smartphones, high-speed external storage, or the latest peripherals to your PC.

STILL BEAUTIFUL

The clean, modern design, iconic cable management bar, and uninterrupted tempered-glass side panel showcase your stunning build.

ENJOYABLE BUILDS FOR ALL

Cable management can often take more time than assembly. We designed a cable routing kit with pre-installed channels and straps, for intuitive and easy wiring.

Product description

Elando Silicone Case Compatible with iPhone 12 and iPhone 12 Pro

• Durable Silicone Case: Our case is super smooth, doesn't leave fingerprints, and is shock and scratch-resistant.
• All-round Military-grade Protection: Our case frame is built to be slightly higher than the screen and camera, which helps to protect the screen and camera from. falling or being scratched when facing down.
• Easy to Install: Our case fits around your phone perfectly with precise hole positioning and sensitive keys and won't interfere with your phone's microphone.
• Anti-slip, Easy to Clean: Prevents your smartphone from sliding out of your hands or when on smooth surfaces. You can also wipe any stains off of your case easily. as it's super easy to clean.
• Compatibility: Supports wireless charging and is compatible with iphone 12 and iphone 12 Pro models. Comes in a variety of different colors.

User questions & answers

Question:	Is this phone case soft and comfortable
Answer:	Yes perfect fit.If you bought the wrong model,please contact us as soon as possible!
Question:	Is this case made using a matte finish, or glossy
Answer:	No,this case is not bulky,it's a slim lightweight case.
Question:	Does this case support magsafe chargers
Answer:	No,it does not cover the screen,it is only a back cover.
Question:	Which model of phone is this case suitable for
Answer:	Plastic and tpu,the sides are soft TPU, back is hard plastic

Product description

Galaxy A12 Dual Layer with Swivel Ring Car Mount Kickstand Hybrid Hard PC Soft TPU Protective Case



Compatible Phone Models :

Samsung Galaxy A12



Packaging including

1 x New Phone Case 1 x HD Screen Protector



6 Reasons you will choose:



Great Protection: Dual layer support good protection to your phone. Combined with hard PC and soft TPU to protect your phone from drops, scratches and bumps.

Metal ring kickstand can rotate 360°,easy to rotate and sturdy on the case.Built in kickstand gives you the convenience to watch videos and movies hands-free with desired comfort and stability.

Built-in metal magnetic sheet for stable adsorption,which can be directly adsorbed to the magnetic car mount holder.(Not includes the magnetic car mount holder)

Soft Side Grip: Covered by soft rubber to great touch feeling.

Camera Protection: Raised lips are strategically placed behind every corner to ensure camera and back protection.

Precise cutouts ensure easy access to all features.



Feedback:

Any question for your order .We will reply to you within 24 hours and give you a satisfactory answer.your satisfaction is my effort.Thank you!

Our products have been well tested, examined and packaged before sending off.We guarantee the quality of item.If for any reason this product fails to perform as you think it should, or if you simply don't like it, just return it to us for an exchange or a full refund

• Cell Phone Protective Case For: Samsung Galaxy A12; Package inludes a free PET HD Screen Protector (Plastic),
• Multifunctional: Double layers hybrid protection, hard PC case can prevent your Galaxy A12 from being scratched, soft TPU protect your Galaxy A12 5G against shocks, damages.
• Perfect product design:Two - in - one case, consists of comfortable TPU and hard PC, the two are closely aligned, escort your phone. The raised lip on the edge protects the screen and camera.
• Rotatable Ring Holder: Metal ring kickstand can rotate 360°,easy to rotate and sturdy on the case.Built in kickstand gives you the convenience to watch videos and movies hands-free with desired comfort and stability,Besides,Built-in metal magnetic sheet for stable adsorption,which can be directly adsorbed to the magnetic car mount holder.
• Precise Cutout: All buttons and interface user-friendly design to avoid frequent disassembly. And the case perfect cutouts for speakers, camera and charging hole allow you to easy access to all features and convenient for charging your phone without take off the case.

Product description

Set out with LifeProof FRĒ for Apple iPhone 6/6s and live with no limits. Waterproof and drop proof, FRĒ for iPhone 6/6s has the guts to go into the thick of it and come out unscathed. Featuring a built-in screen protector, FRĒ shields your iPhone 6/6s from Mother Nature’s worst. From ocean shores and mountain trails to desert dunes — no environment is too extreme for LifeProof FRĒ.

• Compatible with BOTH iphone 6 and iPhone 6s Not compatible with 30-pin to Lightning Adapters or the majority of non-Apple branded USB to Lightning cables
• FRĒ: Built-in scratch protector is virtually invisible to the eye and touch; full access to buttons and controls - charge and sync through the micro USB port; profile: slim, sleek design follows your phone's precision lines
• Water and Snow Proof: Fully submergible to 66'/2 m for 1 hour; Sealed from snow, ice, dirt & dust particles - meets or exceeds IP-68 Ingress Protection Rating Shock Proof: Withstands drops from 66'/2 m - meets or exceeds MIL STD 810F-516
• Shock Proof: Withstands drops from 66'/2 m - meets or exceeds MIL STD 810F-516
• Proper installation of a LifeProof product is important to successful use so please review the installation video and check the user manual to ensure correct installation Includes LifeProof 1-year limited warranty (see website for details) and 100% authentic

User questions & answers

Question:	why are these cheaper than on the lifeproof website
Answer:	Because they were bought as open box from retail stores
Question:	I put the case on my phone and i can hear calls clearly, but i am being told that i sound muffled? any help for this
Answer:	Sometimes I have to open the charging port and then I am heard better.
Question:	Is it worth the money
Answer:	I have had a few LifeProof cases and I like how this version is slim and sleek. However, after spending a good amount of money on a case I expect much better protection for my phone. My phone screen SHATTERED while I’m the case!!!! I DIDN'T EVEN DROP MY PHONE. One minute the phone was fine and when I picked it up a minute later the screen was shattered. WTH?!! Not worth the money.
Question:	is the cover over the finger print reader 6s the same material as the clear cover? Is there any problem reading the finger print option
Answer:	there is no problem reading fingerprints. however, my home button cover came off after 3 years of use.

Product features

Defy Elements

LifeProof FRĒ for iPhone 6/6s features a built-in screen cover that shields the touchscreen and keeps the elements out. Plus, FRĒ is WaterProof, DirtProof, SnowProof and DropProof, so your phone withstands any environment. LifeProof FRĒ for iPhone 6/6s opens up a world of exploration for you and your phone.

FRĒ

When you want to keep your display in pristine condition, LifeProof FRĒ for iPhone 6/6s delivers peak pixel protection. It features a built-in screen cover that’s so discreet you barely notice it’s even there — until you’re glad it is.

Optical

Equipped with an AR-coated optical glass lens, FRĒ transforms your device into an on-the-go action cam. The front-facing camera stays exposed for victory selfies, and the back camera is protected to ensure that every shot comes out crisp.

Audio

Every case is engineered with our Sound Enhancement System that amplifies your iPhone 6/6s’ built-in speaker for a more robust listening experience when you’re roughing it in the wild.

Access

FRĒ locks out the elements — not your inputs. Custom designed to pair perfectly, this waterproof iPhone 6/6s case gives you full access to your charging port, headphone jack and all other controls.