12 best phone cradles

• 【Wide Compatibility】This cell phone stand is compatible with all 4-8 inches smartphones in phone cases, like iPhone 12 mini 11 Pro XS Max XR x 6 6S 7 8 Plus, Galaxy S10+ S10e S10 S9+ S9 S8+ S8 S7 Note 10 9 8, LG, Sony, Moto, LG, Google Pixel, Nexus etc.
• 【Stable and Anti-scratch】The iPhone stand is made of high-quality aluminum alloy with a nice finish. Stable and easy to watch Youtube or FaceTime. Besides, rubber non-slip pads protect the surface of your phone case and desk from scratches.
• 【Make Your Life Easier】Using this desktop phone holder at home to prop up your phone, you can better view recipes while cooking. It's also great for on your nightstand, so no more fumbling around in the morning to shut off the alarm.
• 【Suitable Viewing Angle】The phone cradle for desk provides you with a comfortable viewing angle. Put it on your office desk, and you can see at a glace incoming notifications and calls when the phone is in silent mode.
• 【Thoughtful Detail Design】 A large hole in the back allows a charging cable to bend gracefully away. And the outer edge of this hole is beveled so that it will not cut into your cord — a perfect dock for your phone.

User questions & answers

Question:	So my samsung galaxy tablet 3 will fit on this? Can I have it on the stand & use it or will it tip over
Answer:	Hi Friend. This Phone Stand works well with 3~8'' devices. If you want a stand to holder your tablet,we have another tablet stand for you. Search:B01DBV1OKY Or Go to:https://www.amazon.com/Tablet-Stand-Adjustable-Lamicall-reader/dp/B01DBV1OKY
Question:	Does it work for Samsung Note 10 Plus
Answer:	It is a holder. I would imagine it would work for any phone, you use your own power cord. I love it. My phone sits upright or sideways. It is at a good angle to see it.
Question:	Does this block the audio port on an iphone 6s
Answer:	Yes, it does block the audio port on the 6s when upright in the stand. Turning the phone sideways is an option.
Question:	WIll an Iphone 6s plus in an Otter box case fitin this stand
Answer:	Yes,it should. The thickness of the stand is 15mm, enough to fit in your iPhone 6s plus with otter box case.Thanks!

• Wide Compatibility: This stand is copmatible with all smartphones even with phone cases, all 4 - 8-Inch smartphones and e-readers, iPhone 11 Pro Max/ 11 Pro/ 11/ Xs Max/ Xs/ XR/ X/ 8 7 6 6s Plus 5 5s SE , Galaxy S10/ S9 /S9 Plus/S8 / S7 / S6 / Note9/Note 8, LG, Huawei,LG,IPAD mini, Samsung Tab, Google Nexus, Kindle and so on.
• Smart Lifestyle: Hands-free, make it possible to play games, use Facetime and Youtube while charging. Play a good role in your office, kitchen, nightstand, dining table.
• Suitable Viewing Angle: The desktop phone stand will provide you with a comfortable angle, which is convenient for you to operate the phone and relieve cervical spine fatigue.
• Study Construction & Rubber Pads: Durable aluminum body, with a sturdy construction, can hold your phone steadily. Rubber pads and feet protect your device from scratches and sliding.
• Excellence on details: Similar CNC technology as Macbook adopts, you could enjoy the comfortable sense of touch even on the edge.

User questions & answers

Question:	Will this work on the kindle paprewhite tablet
Answer:	Yes, it will work
Question:	Does it adjust for different viewing angles
Answer:	No, it can be adjusted.But we have an adjustable stand, you can click the link below. https://www.amazon.com/dp/B07H878J9Z
Question:	How do you get the charger from falling through the hole
Answer:	You can charge the phone through the hole on the back.
Question:	Does the rose gold match the iPhone rose gold color
Answer:	It is a pretty Rose Gold color. I don’t know if it is the same color as the IPhone.

Product features

CreaDream Cell Phone Stand

CreaDream make your life better and bring convenience to your life.

• Rubber protection
• Sturdy construction
• Aluminum alloy material
• For many occasions
• Strong and sturdy

Anti-Skid & Anti-Scratch

Rubber pads and feet protect your device from scratches and sliding.

Suitable for all occasions

Can be used for various desktops in offices, living rooms, kitchens, bedrooms, freeing hands.

Wide Compatibility

The stand fits all mobile phones. Devices with screens 4- 8 inches can also be used.

Product description

Nulaxy Adjustable Phone Stand, Cell Phone Stand, Phone Holder for Desk Cradle Dock Compatible with Phone 11 Pro Xs Xs Max Xr X 8, iPad mini, Nintendo Switch, Tablets (7-10"), All Phones

• UNIVERSAL COMPATIBILITY: This phone stand works with all 4-10" Smartphones Tablets and e-readers, such as iPhone 11 Pro Xs Xs Max Xr X 8 7 6, Switch, iPad mini, Samsung Galaxy S10 /S10+/S9 /S9+/S8 /S8+, Samsung Tab, Google Nexus, Kindle.
• ADJUSTABLE & PORTABLE: The phone cradle is fully collapsible, it can be easily adjusted to ideal position, free your hands, which is a good desk accessories while watching video, playing games, making phone call, viewing recipes, using Facetime.
• STURDY & PROTECTIVE: The cell phone stand is made of high quality premium aluminum, it stays firmly in place, hold your phone steadily, no worry any wobble at all. The rubber pads can protect your phone from any scratching and sliding.
• CASE FRIENDLY: The hook width of the stand is 19mm, no need to remove your phone case, which is long enough to hold your device with HEAVY CASE on, please make sure the thickness of your device is no more than 19mm (0.74").
• WARM TIPS: Please set your device(4"-6") in landscape or portrait mode, and set the device (6"-10") in landscape mode, which will provide more stability.

User questions & answers

Question:	Is this product made in the USA
Answer:	I doubt that it is since my credit card was hit with a $2.40 International Transaction fee.
Question:	Will the joints loose after a few months of folding and unfolding
Answer:	Had 3 for over a year now.... one of the joints failed and is no longer usable. Wrote the seller and they said there was a 6 month warranted and some mystery 18 month warranty that I apparently never completed. So out of luck.
Question:	When setting the angle, does it lock (you need to push a button to move it) or is a friction hold (pushing a little too hard will move it
Answer:	The angle is held in place by friction. It is pretty strong so it takes a bit of force to move it. I am always changing the angle and it holds in place every time.
Question:	What is the difference between this one at $7.99 and the one for $13.99? They both say the same thing and both from Nulaxy
Answer:	The 13.99 stand is a bigger and slightly heavier stand so the phone sits a a little higher. I use it on my bed because it's more stable on the mattress. The 7.99 one is smaller and lighter and is perfect for my desk at work. This one is stable on a solid surface and the other can more or less handle a sofa or bed. They are both sturdy and well built. If I were to carry one around I'd choose the smaller one for convenience and lighter weight. If I were to use a large tablet I might lean towards the larger stand though using touchscreen on a note 4 and the smaller stand works well. I like the phone sitting higher with the bigger stand in bed and the phone sitting a bit lower on the smaller stand at work. Hope this helps.

• Special Design: MULTI-ANGLE design make cell phone stand possible to be adjusted to your desired angle (270 degree). And compared with other phone stands, the hook of our stands have been widened in order to fit well with the devices in protect case.
• Universal Compatibility: Stand for cell phone work with all 4 -10-Inch smartphones and e-readers, iPhone 11 Max Pro/ 11 Max/ 11/ Xs Max/ Xs/ XR/ X/ 8 7 6 6s Plus 5 5s SE , Galaxy S9 /S9 Plus/S8 / S7 / S6 / Note9/Note 8, LG, Huawei,LG,IPAD mini, Samsung Tab, Google Nexus, Kindle and so on.
• Sturdy Construction & Rubbers Pads: Durable aluminum body, with a sturdy construction, can hold your phone steadily. Rubber pads and feet protect your device from scratches and sliding.
• Smart Lifestyle: Hands-free, make it possible to play games, use Facetime and Youtube while charging. Play a good role in your office, kitchen, nightstand, dining table.
• Excellence on details: Similar CNC technology as Macbook adopts, you could enjoy the comfortable sense of touch even on the edge.

User questions & answers

Question:	Where is this made and shipped from
Answer:	This product is made in Shenzhen, Guangdong, China. Shipped from Shenzhen to the United States, it is now stored in the Amazon warehouse in the United States.
Question:	When are more black available? I need two
Answer:	you can order two.
Question:	Does this have the option of a straight 90 degree angle, e.g. to use for taking a straight-on video
Answer:	You can angle the phone any amount that you would like. It sits at a 90 degree angle easily both vertical and horizontal on the stand.
Question:	Would this still work with a popsocket placed in the middle of the phone
Answer:	The width of the mobile phone location of the stand is 14MM. if the thickness of your phone and popsocket is less than 14MM can be used.

Product features

CreaDream Adjustable Cell Phone Stand

CreaDream make your life better and bring convenience to your life.

• Multi-angle, adjustable
• Rubber protection
• Sturdy construction
• Aluminum alloy material
• For many occasions
• Strong and sturdy

Multi-angle adjustable 0-270 degree

Multi-angle design make cell phone stand possible to be adjusted to your desired angle (270 degree).

Anti-Skid & Anti-Scratch

Rubber pads and feet protect your device from scratches and sliding.

Wide Compatibility

The stand fits all mobile phones. Devices with screens larger than 8 inches can also be used, but it is recommended to place them horizontally.

• 【Universal Compatibility】Lamicall cell phone stand can work with all smartphones from 4-8 inches, like Apple iPhone 12 Mini 11 Pro Xs Max XR X 8 7 6 6S 5 5S SE Plus, Galaxy S8 S7 S6, Note 6 5, LG, Sony, Nexus, even with a case on.
• 【Desktop Partner】Great desk accessories for office and home. A smartphone stand with perfect viewing angle for making phone calls, watching movies, viewing recipes and using facetime.
• 【Sleek and Elegant】Made of high-quality aluminum alloy, this desk phone holder has a smooth edge, a nice finish and beautiful metallic luster. It looks sleek and elegant on your desktop.
• 【Stable and Protective】This phone dock with a low gravity center can hold your phone stably. Besides, its rubber cushions protect the phone from scratches and sliding.
• 【Warm Tips】The hook width of the mobile phone stand is 14mm, please make sure the thickness of your device is no more than 14mm (0.55 in). For a cell phone larger than 6 inches, kindly set it in landscape mode for more stability.

User questions & answers

Question:	How strong is the flexibility, so my phone won’t keep falling downward when I put it on the mount
Answer:	This stand is made out of a strong thick metal and the prongs that cradle the bottom of phone or tablet are molded. The only adjustable are is the top joint that is attached to both the cradle arm and the stand it's self.
Question:	Can it be folded up to carry
Answer:	NO --- does not bend -- stationary -- would be easy to put in a travel bag -- but not fold up in a computer only bag -- great stand for a mobile phone or smaller IPAD!
Question:	Wondering if additional stuck on pads for the base are available
Answer:	When mine arrived it came with extra stick on pads I could use for the item. I thought that was a great addition!
Question:	Looks great but is that a huge logo right on the front of the base? Is it a sticker that can be removed easily
Answer:	I think what you see as the huge logo is the smartphone they are using for demonstration purposes. Basically the base is a sturdy, attractive burnished silver base. (I have the silver model. This one looks like an alternative black.) It does have the brand name imprinted on the top of the piece that sits on the table, but it is doesn't stand out. The stand looks like a modern easel that one might use to hold a small picture frame. It holds my smartphone well, and it holds my 10 inch tablet. Don't think I would try anything larger than that, though. There are two models as far as I know--one bends and the other stays in a fixed position. I have the bendable model, and think it is worth a little more for that flexibility to fit different locations.

Product description

Keep your hands free when talking on the phone, reduce fatigue and provide comfortable cushioned relief to your shoulder, neck and ear. Designed to fit most black contour back phones the shoulder rest attaches with self-adhesive back and the non-slip black plastic rest includes antimicrobial product protection.

• Provides relief to your neck and shoulder when talking on the phone with the comfortable, cushioned non-slip black plastic that keeps your hands free
• Includes antimicrobial protection to keep your shoulder rest clean
• Fits most black contour back phones and mounts easily with self-adhesive back
• Perfect for fast paced environments, the shoulder rest allows for quicker responses than putting on a headset
• Designed to help alleviate neck and shoulder fatigue often associated with cradling phone handsets between the shoulder, neck and ear

User questions & answers

Question:	Will this fit on a Nortel T7316E phone system
Answer:	The Softalk 00101M with microban fits most handsets with a contour back. The Nortel appears to have a contour back, so this should work. The shoulder rest is 6.5 x 2.5 x 3 inches, so you may want to confirm the size of your handset. It’s easily returnable to Amazon otherwise!
Question:	Does this fit standard desktop office phones
Answer:	The Softalk 00101M shoulder rest is designed to fit most contour-back phones (curved handset). Just in case, the dimensions are 6.5 x 2.5 x 3 inches, so you should confirm the size of your handset. We also offer other options which you can see at our Softalk Shoulder Rests store on Amazon: https://www.amazon.com/stores/Softalk/Phone+Shoulder+Rests/page/A9C6043A-592C-4A4F-9B5F-17F215652EA8
Question:	Can you buy adhesive to reapply to a phone shoulder restadhesive to reapply my shoulder rest
Answer:	Double-sided tape with a foam layer is suggested. Auto parts weatherstrip tape or even an arts and crafts store item.
Question:	Is it hard plastic or soft
Answer:	It’s not like solid hard plastic. It’s soft, but not cushy it is sturdy

Product features

Softalk Phone Shoulder Rests

The original comfort phone shoulder rest for your handset, providing hands-free comfort while on the phone. Available to match and fit the most popular phone handset colors, shapes and sizes including curved and flat handset profiles.

Original Softalk: Our original Softalk provides cushioned relief with its non-slip design. Microban antimicrobial product protection

Softalk II: Provides cushioned relief to your shoulder, neck and ear with the extra deep ergo-grip shoulder pocket design. Features Microban antimicrobial product protection.

Softalk Mini: Mini profile for smaller handsets or even install on a dedicated cell phone case for comfortable and private cell phone calls. Features Microban antimicrobial product protection.

• Ultra Sticky Suction Pad:Firm suction pad sticks tightly on the dashboard or most surfaces. Remove easily by pulling the suction pad without leaving any nasty mark on your dash.(NOTE:We DO NOT recommend to apply the dashboard car mount on leather, wall or filmed glass surfaces as the suction cup is designed with strong viscosity and attraction)
• Extendable Arm:Telescopic arm can extend from 4.6in to 6.6in and pivot up or down for optimal viewing height. Prevent from blocking your view while driving.
• 360°Rotations:Swivel ball head ensures 360° free rotations to your desired viewing angle. Quick to adjust for a safe and effortless drive. As summer approaches and days are getting hotter, please avoid direct exposure to the sun as this may affect the function of your car mount
• Flexible Arm Lock: Simply press the button to adjust arm width that ranges from 1.6-3.5in (4-8.8cm). Our car mount holder is compatible with most smart phones up to 6 inches.
• All-Around Protection:There are sponge cushions on the car phone mount for secure and wobble-free fit for your cell phone. Foldable holding feet allow hassle-free charging for your cellphone. Note: Please avoid the car mount if you use a pop grip. It cannot hold phones with your Pop Mount/Pop out stand/expanding stands.

Product features

Broad Compatibility

Works with most smartphones and cases. The arms present a firm grip to hold the latest iPhone series, Galaxy series, phones from Motorola, Sony, and any other mobile phone brands with width in a range of 1.8in/4.5cm and 3.7in/9.3cm.

Sticky Suction Cup

The suction cup has a coating of sticky gel that prevents air gaps and ensures a secure hold on the dashboard, windshield, or desktop. Note: Works on smooth and flat surfaces. Do not attach it to the windshield in hot summer.

Anti-fall Adjusting Knob

You can easily adjust the length of the arm by turning the knob, and customize the distance between your phone and you as needed. The knob has been upgraded and uses an anti-fall design, it will not fall off during the adjustment process.

Anti-skid and Anti-scratch

There are sponge pads on the arms, bottom feet and surface, which can protect your device from being scratched. Also. The cushioned car mount absorbs the vibration during bumps, and holds the phone securely in place.

Rinse and Reuse

If the sticky suction cup gets dirty or loses its stickiness, simply rinse it with water and let it air dry, it will stick like new. You can easily remove the car phone mount holder from vehicle to vehicle and re-attach it as you want.

Warm Prompt

The total thickness of the combination of phone and phone case should not exceed 13mm/0.5in. To ensure a firm grip, please remove the ultra-thick phone case, pop grip, and phone ring holder when using this car phone holder.

Product description

Quick release button: press button on back of unit to slide open and then take out mobile phone. Press the arms on both side to clamp mobile phone again, simple of operation, save time and power.360 degree rotation: The fully 360-degree rotation provide you with the best viewing angle.The holder ensures safe driving whether you are talking, navigating, listening to music or charging oad compatibility: passed a wide range of tests, fit for most cellphones, iPhone 7 7 Plus iPhone 6S Plus, 6S, 5S, 5C, Samsung Galaxy S6, HTC, LG, Nexus, Nokia, GPS Device. Sturdy, cradle-less and attractive device holding system.Suitable for width size from 1.9 inch to 3.7inch smart phone or electronic devices.1 year warranty. Not compatible with the pixel 5 Smartphone. Car mount, car mounts, cell phone holder, cell phone holders, car phone mount, car phone mounts, car holder, car holders, cell phone Car Mount, cell phone Car mounts, phone mount for CAR, phone mount for cars, phone mount, phone mounts, phone holder for car, phone Holder for cars, car phone Holder, car phone holders, phone Car Mount, phone Car mounts, car mount for phone, Car Mount for phones, cell phone mount, cell phone mounts, mount

• Quick Release Button: Press button on back of unit to slide open and then take out mobile phone. Press the arms on both side to clamp mobile phone again, simple of operation, save time and power.
• 360 Degree Rotation: The fully 360-degree rotation provide you with the best viewing angle.The holder ensures safe driving whether you are talking, navigating, listening to music or charging.
• Broad Compatibility: Passed a wide range of tests, fit for most cellphones, iPhone 7 7 Plus iPhone 6s Plus, 6s, 5s, 5c ,Samsung Galaxy S6, HTC,LG, Nexus, Nokia, GPS Device. Sturdy, cradle-less and attractive device holding system.suitable for width size from 1.9 inch to 3.7inch smart phone or electronic devices.
• Single-handed Operation: Simple installation and removal of smart phones. Simplistic Installation, Single-handed Operation, No Tools Needed.
• This car phone mount holder is compatible with most all cell phone devices

User questions & answers

Question:	the air vent directional controls on my 2010 Scion xB are thicker than most, anyone have experience with this fitting/not fitting
Answer:	I have a 2009 Saab 9-3 with air vents that form a grid pattern, this does not fit within the space of the grids, so I cannot use it.
Question:	Are those reviews really real ? seems so fake
Answer:	I dk what reviews are fake or real, but I do know this product works very well! There is a convenient release button on the back that springs open the sides and allows an easy removal of the phone, which (when squeezed) has a ratchet system to hug the phone when you are ready to use it again. The clamp that holds it to the vent is fully adjustable and the switch is easy to operate which locks it in place. I think you will be very pleased.
Question:	I have an otter box on my iphone 6s plus. Will the mount still fit
Answer:	I have an iPhone 8 plus with a Spigen Herringbone case and Ring holder on the back and have been using this holder for a year now with no issues. Yes, the phone does not fit perfectly in to the holder and does stick out but there is still enough grip from the sides and with it tilted up to my view point in my car, Mazda CX5, the phone has never fallen out. At least not yet. I have tried a LOT of holders and this has been the best one I have found to date. I am buying 2 right now for my parents. My dad was driving my car while I was out of the country last month and the holder mysteriously disappeared when I went to get the car back. :)
Question:	Will it hold a Galaxy S
Answer:	It can hold S8 but not Note8 or Note9 (Note series are too heavy). Even with S8, overtime it will just get loose.. We had to put in a plastic piece to make it clam stronger on the air vent. Personally I think the design can be improved

Product features

Universal Design to Accommodate Most Any Cell Phone

Designed to hold any phone size between 1.9 inches to 3.7 inches wide. Simply press the button on the back to open the sides of the mount to fit your size phone. Close the sides to secure your phone in the mount.

Clips to your air vent and keeps your windshield clear of any obstructed view.

Superior in Quality

Made to withstand any condition, hot or cold. Designed to secure your phone on smooth roads and bumpy roads. Made with high quality materials to withstand everyday use.

Soft padded interior to protect your phone while in the mount. Tough Plastic exterior to withstand rough conditions.

Ease of Use Design

360 Degree Rotation, a one-click release button, and adjustable side grips to accommodate your size device from 1.9 to 3.7 inches wide.

Quick Release Button

Press the button on the back of the mount to quickly release your phone from the mount and to expand the sides for use with larger phones

Eye Level Safe Viewing

Keep your windshield clear of obstructions with this mount. Create a safe, eye level viewing of your device while mounted.

Use for Horizontal or Vertical Vents

This mount performs best on horizontal and vertical vents only. It is not advised to use this product on circular vents.

Installation Instrustions

1. Hold the car mount with your hands and unscrew the lock washer on the back. (Do not throw away this washer) Place circular ball on lever through lock washer.

2. Insert the ball into the slot in the back of the mount.

3. Tighten the lock washer back onto the mount.

4. The unit is now assembled.

5. Use the bi-directional lever to clamp the mount to your air vent. One way will be tighter than the other.

6. Adjust your mount to the desired position and you are ready to go!

7. Simply open the sides with the button on the back of the mount and place your cell phone or device in the mount and close the sides to secure it. Then use the quick release button on the back to remove your device.

Product description

The iOttie Easy One Touch 4 Dashboard & Windshield Mount is a universal smartphone solution that is engineered to safely enhance your driving experience. U.S. patent protected, the one of a kind easy one touch mechanism allows you to easily mount and remove your smartphone with one simple hand motion. Utilize the increased range, strength, and stability of the telescopic arm to find the perfect position for your smartphone on either dashboard or windshield. Securely mount on your dashboard, windshield, or desk with iOttie’s super strong suction cup. The easy one touch dashboard and windshield mount is universally compatible with all smartphones sizes to hold your device securely so you can drive safely.

• Easy One Touch Lock/Release: Patented easy one touch mechanism allows quick one hand open and close operation
• Adjustable Viewing: The newly re-designed telescopic arm extends from 4 – 6.5 inch and pivots on 225 degree arc for a variety of optimal positions
• Universal Mounting: Holds all phone and case combinations from 2.3 Inches 3.5 Inches
• STRONG SUCTION: One time use dashboard disc and reusable suction cup combo offers superior stick strength
• Bottom Foot: Foot on the bottom of mount cradle can be adjusted side to side, up and down, or removed to hold smartphones and cases of all sizes

User questions & answers

Question:	Will it hold the iPhone 5S
Answer:	Yes it should. The iPhone 5 is listed at 2.31 inches wide and this mount is listed as supporting phones from 2.3 inches wide so it should fit fine. There are two small feet at the bottom of the mount to keep your phone from sliding through as well. It is a very nice phone mount, one of the best I've ever used in a decade. The suction pad holds extremely well and fastens to the front plate of a pro-clip nicely for a great pro installation.
Question:	Does anyone even bother to read the previous questions before adding another one that has been asked 6 times already
Answer:	So many of these reviews are paid/fake endorsements. Click the reviewer and read their other reviews. So sad reviews are becoming useless. Read the 1 and 2 star reviews from real people.
Question:	Will it work with a thick phone case
Answer:	I have an otter case and a pop socket and it’s too thick for it to stay on. Had to return. Without the pop socket it’d be a fantastic product that’d hold my phone.
Question:	Is this worth the full $25? Does the sticky stuff hold well for a heavy Iphone X
Answer:	Bought this for my daughter January 2017. (Wisconsin). She loves it. However it broke after 18 months. She wants another and I’ll be ordering the newest version for her. She uses it with an iPhone 8 Plus with a case that holds 4-5 credit card-type cards. So it’s bulky, yet I t held the phone securely. So I think it is worth $25. I’m hoping that whatever broke has been improved. But even if it didn’t, if it lasts another 18 months she’ll be happy. She has a 2016 CRV and she placed the pad on the flat surface in front of the secondary screen.

Product features

Easy One Touch Lock & Release

The one of a kind Easy One Touch mechanism allows you to easily mount and remove your smartphone with one simple hand motion. This product or its use may be covered by U.S. Patents: 8,627,953

Mount Foot

Foot on the bottom of Mount Cradle can be adjusted side-to-side, up and down, or removed to hold smartphones and cases of all sizes.

Suction Cup

Suction Cup can be restored by simply rinsing under warm water and air drying.

Exploring

Learn the names of each part included on the Easy One Touch 4 Car Mount.

Compatibility

Universally holds all phone and case combinations from 2.3” -3.5'” includes Easy One Touch mount locks and release system.

DriveSmarter App

Download the iOttie DriveSmarter app with a GPS location system to help you find the location of where you last parked.

Windshield Mounting

Landscape Orientation

Desk Mounting

• Portable and Light-Weighted: With small size of 3.74" x 3.35", UGREEN cellphone stand is easy to fold and slip into your pocket. A perfect companion for travel, home and office.
• Multi-Angle Adjustable: Simply adjust and choose your preferred viewing angles from 15° to 100°. UGREEN desk phone holder stand holds your smart phone or mini tablet at a comfortable angle, ideal for watching video, reading, video recording, browsing the web, playing games or facetime call.
• Widely Compatibility: This universal phone cradle stand fits for 4 to 7.9 Inch smartphone, mini tablet, e-reader with thickness up to 0.55" (including phone case). Compatible for Apple iPhone 12 11 Pro Max, iPhone 12 mini, new iPhone SE, iPhone XS XR X 8 7 6S 6 Plus 5, iPad mini, Samsung Galaxy S20 Ultra S10 S10e S10+ Note 20 9 8 S9 S8 Plus S7 Edge S6 S5 J7 J3, LG G7 G8 V40 ThinQ V20 V30 G4 G5 G6, Google Pixel 4 3a 3 2 XL, Nexus 5X 6P, Motorola Razr, Moto G7 G6, HTC U11 10, OnePlus 7 6T 6 5T 5.
• Sturdy and Durable: Premium ABS material supports this desktop phone holder durable in usage. Silicone pads on the bottom and cradle protect both your phone and stand from sliding and scratches.
• What You Get: 1 Pc UGREEN office phone stand adjustable.

Product features

Free Your Hands

UGREEN mini desk stand can provide a safe and secure mount for your smartphones and small tablets in portrait or landscape mode safe.

Now it is time to give your hands a break, enjoy watching video, reading, facetime or browsing the web simply with this phone holder.

No matter in the office, kitchen, bedroom or on the table, this phone stand is a perfect companion for holding your smart phones.

Sturdy and Reliable

Premium solid ABS material makes it sturdy and secure; Anti-slip silicone pads protect your device from scratches.

Portable Size

Size: 95 mm x 85 mm; This one-piece, foldable design makes it much more convenient when carrying in a bag or on the go for travelling.

Adjustable Multi-Angle

From 15° to 100°, you can adjust to your preferred viewing angles and watch videos in a more comfortable position, easy to operate.

• ✅ NO TOOLS- Press to "STIK" and Pull to release. Never leaves a residue and is waterproof!
• ✅ AIRSTIK is reusable ♻️ and never loses suction- to clean just wipe with water!
• ✅ USES ARE ENDLESS - Mount to any window, mirror, or glass-like surface. Perfect for baths and showers.
• ✅ 💪🏽 SUPER STRONG holds up to 2 lbs & made of Polycarbonate that won't break like cheaper acrylic
• ✅ 🇺🇸 HANDMADE IN USA and covered with Limited Lifetime Warranty

User questions & answers

Question:	Can I buy this same product in white
Answer:	Yes but unfortunately amazon has made the ad inactive while they move the inventory around for some reason. Please be patient as it should come back online within a week. I’m very sorry and thanks for reaching out. -Joshua
Question:	Does this work with a pop socket
Answer:	Not sure if you're asking if it will hold it by the PopSocket (no) or if you can use with a PopSocket collapsed (yes) Please let me know if you have any more questions. Thanks, Joshua
Question:	Does it work on a tile surface while laying in a tub
Answer:	All tile is different so it’s impossible to know unless I knew exactly the texture of said tile. I can suggest if a traditional suction cup can creat suction then yes AIRSTIK® will stick also. Hope this helps!
Question:	Does it work in the shower
Answer:	Hi TDG Please see other color for same plus other questions/answers. Yes! As long as you apply cradle while it’s dry, taking a shower (water/steam) will not release the AIRSTIK®. Thanks!

• 【It's What You Want】As a professional stand manufacturer, Lamicall made market research to find the real needs of customers and then developed this fully adjustable phone tablet stand with superior stability. A perfect desktop accessory that frees your hands to watch videos, use Facetime, view recipes and enjoy games.
• 【Dual-hinge Adjustment】Using the 6000 times rotation tested hinges, our desk cell phone stand holder has better stability and durability. Tight hinges make it easy to be adjusted and stay in a position. Besides, the folded size of the phone stand is 4.2" x 3.5" x 0.98" (107 mm × 89 mm × 25 mm), you can also fold it up to carry around for travel and business trips.
• 【Larger Base, Enhanced Stability】Thanks to high-quality aluminum alloy and the larger heavier base, Lamicall phone charging dock provides solid support to hold your devices in the upright position without falling over like others.
• 【Wider Compatibility】Lamicall table cradle stand fits all smartphone, tablets and e-readers (4- 11''), including iPhone 12 Mini, 12, 12 Pro, 12 Pro Max, 11, 11 Pro, 11 Pro Max, SE, XS, XS Max, XR, X, 8 Plus, 8, 7 Plus, 7, 6s Plus, 6s, 6 Plus, S20+, S20, S20 Ultra, S10, S9, S8, iPad Mini, 9.7'' iPad / Pro / Air etc.
• 【Warm Tips】For devices larger than 8'', please set it in landscape mode for a better experience.

User questions & answers

Question:	Anyone tried this with a loopy case yet
Answer:	Excellent for Drilling: Natural Woods Man-Made Boards MDF Chipboard Plywood Aluminum/Non-Ferrous Aluminum Composite Material (ACM) Composites Composite Decking Materials Warning: When drilling aluminum/non-ferrous materials, for optimal results and extended tool life use lubricant or air cooling. Make sure the material is fixed and drill is stable during drilling.
Question:	Used this on my iphone 11 and it set off the sos button! it also damaged the case which i had to replace. anyone else have similar issues
Answer:	1/8" Diameterhttp://www.amanatool.com/55227-carbide-tipped-countersink-with-adjustable-depth-stop-and-no-thrust-ball-bearing-3-8-dia-x-1-8-drill-dia-x-1-4-inch-quick-release-hex-shank.html
Question:	Own the portable plastic version & love it. Need a 2nd one but, not sure the new aluminum version is for me. Any advice would be greatly appreciated
Answer:	Counterbore diameter is 3/8″, max depth is 3/8″.
Question:	Does is come in space gray color like your A stand
Answer:	This countersink is made in Israel.