10 best mpow cell phone accessories

Product description

Kindly Note:

1. Not recommended to install the car phone mount on too rough or curved dashboard surfaces.

2. Peel the protective film from the suction cup bottom before use.

3. The preferable installation area for the stabilizer base should be close to the phone holder for maximum stability.

4. Let it sit for 24H after installation.

• FREE INSTALLATION & UNOBSTRUCTED SIGHT: Mpow focuses on the innovative and smarter mounting solution and blazes past other traditional dashboard car mounts. Up to 15cm/5.9in aluminum long gooseneck sends the dashboard Phone mount much closer to you without blocking your sight, giving you the freedom to position it on multiple locations on the dashboard or windshield. Most importantly, it can be bent to avoid obstructing display and irregular vents
• STRONG SUCTION CUP WITH STICKY GEL: super strong vacuum suction cup features a layer of sticky gel and a locking lever which can maximize the stability and keep the mount in place. Comes with an anti-shake stabilizer, it safely hold the device without vibrating and wobbling even on rough roads. The suction cup is reusable and washable, Simply rinse in water and let air dry to restore the stickiness.
• HOLDS PHONE AND CASE COMBINATIONS: the adjustable side clamps extend from 1.8in to 3.7in, compatible with most smartphones with screens up to 6.5” and even worn its case. (Galaxy S10/S9/S8/S7/S6/J5/J3/A5/A6/A7, Huawei P20/Mate10/Mate20/honor 8X, iPhone 11 Pro/ 11 Pro Max/ X/XS/XR/8Plus/8/7Plus/7/6Plus/6S/6, Sony Xperia Xz3/Xperia Xz2/Xperia Xz2 compact, Xiaomi Redmi Note 6 Pro/Redmi Note 5 Pro/Redmi Note 5/mi 8 Pro/mi 8/Mi8 Lite/mi A2/MI A2 Lite/mi A1, LG G5/G6/V30/V20 und MP3 )
• VIEW YOUR PHONE AT ANY ANGLE: The flexible and durable gooseneck can be bent to the shape you like, allowing for flexible adjustment for easy positioning and access to device controls. Thanks to the 360 degrees ball-head, the dashboard mount can be flexibly tuned to display at an optimal viewing angle, either in landscape or portrait mode for convenient navigating, calling, and music in the vehicle
• BUILT TO LAST AND PROTECT: the polished surface makes the mount look sleek in your car. The heat-resistant PC and ABS materials make Mpow dashboard Phone holder sturdier than other Pure ABS mounts. The foldable holding feet allow hassle-free charging on the go. The Sponge-Padded surface and grips of the cradle prevent slipping and scratches. Note: Please avoid the car mount if you use a pop grip. It cannot hold phones with your Pop Mount/Pop out stand/expanding stands

Product features

MPOW Universal Dashboard Car Phone Mount

The quick-release button allows you to release and install your phone with one hand motion in seconds.

The side arms expand up to 94mm/3.7in wide, fits most phones such as:

Reusable & Washable Sticky Gel

The car mount’s suction cup has a coating of sticky gel that prevents air gaps from forming. To renew the gel adhesive, just rinse with water and let air dry

Assemble the Car Mount

• Step 1. Unscrew the knob;
• Step 2. Pass the knob through the ball head;
• Step 3. Tightly push the ball head into the socket of the cradle, then tighten the knob.

Package Contents

• 1 x Car Phone Holder
• 1 x Suction Cup Base
• 1 x Anti-shake Stabilizer
• 1 x Manual
• 2 x Spare Sticky Adhesives for Stabilizer

• Ultra Sticky Suction Pad:Firm suction pad sticks tightly on the dashboard or most surfaces. Remove easily by pulling the suction pad without leaving any nasty mark on your dash.(NOTE:We DO NOT recommend to apply the dashboard car mount on leather, wall or filmed glass surfaces as the suction cup is designed with strong viscosity and attraction)
• Extendable Arm:Telescopic arm can extend from 4.6in to 6.6in and pivot up or down for optimal viewing height. Prevent from blocking your view while driving.
• 360°Rotations:Swivel ball head ensures 360° free rotations to your desired viewing angle. Quick to adjust for a safe and effortless drive. As summer approaches and days are getting hotter, please avoid direct exposure to the sun as this may affect the function of your car mount
• Flexible Arm Lock: Simply press the button to adjust arm width that ranges from 1.6-3.5in (4-8.8cm). Our car mount holder is compatible with most smart phones up to 6 inches.
• All-Around Protection:There are sponge cushions on the car phone mount for secure and wobble-free fit for your cell phone. Foldable holding feet allow hassle-free charging for your cellphone. Note: Please avoid the car mount if you use a pop grip. It cannot hold phones with your Pop Mount/Pop out stand/expanding stands.

Product features

Broad Compatibility

Works with most smartphones and cases. The arms present a firm grip to hold the latest iPhone series, Galaxy series, phones from Motorola, Sony, and any other mobile phone brands with width in a range of 1.8in/4.5cm and 3.7in/9.3cm.

Sticky Suction Cup

The suction cup has a coating of sticky gel that prevents air gaps and ensures a secure hold on the dashboard, windshield, or desktop. Note: Works on smooth and flat surfaces. Do not attach it to the windshield in hot summer.

Anti-fall Adjusting Knob

You can easily adjust the length of the arm by turning the knob, and customize the distance between your phone and you as needed. The knob has been upgraded and uses an anti-fall design, it will not fall off during the adjustment process.

Anti-skid and Anti-scratch

There are sponge pads on the arms, bottom feet and surface, which can protect your device from being scratched. Also. The cushioned car mount absorbs the vibration during bumps, and holds the phone securely in place.

Rinse and Reuse

If the sticky suction cup gets dirty or loses its stickiness, simply rinse it with water and let it air dry, it will stick like new. You can easily remove the car phone mount holder from vehicle to vehicle and re-attach it as you want.

Warm Prompt

The total thickness of the combination of phone and phone case should not exceed 13mm/0.5in. To ensure a firm grip, please remove the ultra-thick phone case, pop grip, and phone ring holder when using this car phone holder.

Product description

Strong Suction Cup



This TPU suction cup has been upgraded,thickened and enlarged to ensure more stable adsorption. Plus, the materialalso uses high-temperature resistant TPU, which is not easy to deform and falloff during long-term use.



Holds Your Phone Firmly



The side arms and bottom feet of themount are equipped with non-slip silicone pads, which can ensure that the phoneis kept in place at all times and there is no chance of slipping out, even ifyou drive over speed bumps or make sharp turns.



Washable and reusable



If you remove the dashboardcar phone holder andwant to reinstall it, or the suction cup gets dirty or loses its stickiness,just rinse it with warm water and let it air dry, and the suction cup willrestore its viscosity and stability.



Sleek and Stylish



When it comes to aesthetics andfunctionality, this dashboard phone holder for car is the top pick. The polished mirrorsurface makes the car mount look elegant and fit perfectly well in yourvehicle.



Kindly Note



1. Wipe dry and clean the windshieldbefore installation.



2. Not recommended to install the suctioncup on curved/rough/uneven/dirty surfaces.



3. Before use. please peel off theprotective film from the suction cup



4. After installation, push the leverdown to lock the suction cup



5. When removing the suction cup, pleaseunlock the lock lever first, and then pull up the small tab. Do not pull itdirectly.



Package Included



1 x Phone Mount for Car



1 x Suction Cup Base



1 x User Manual

• Unobstructed Vision, Safe Driving: Curving from the top of the dashboard down, this dashboard car phone mount holder allows you to view your phone without worrying about blockage to your sight of the road, so you can drive home safely.
• Powerful Suction Cup: The suction cup has a coating of sticky gel that prevents air gaps from forming. This way, the dashboard mount stays in place even as you drive over bumpy roads. If the gel loses its grip, just rinse it with water and let it air dry to stick like new
• Fits Most Phones and Cases: Holds phones with 4.0-6.9" displays and up to 103mm/4.1in wide, even with an otterbox case, including but not limited to iPhone 12 SE 2020/11/11 Pro/11 Pro Max/XS/XR; Galaxy Note 20/Note 20 Ultra/S20 Ultra/S20+/S20.
• No Angle Limit: The arm can be adjusted 140° through the security lock instead of the adjusting knob, which allows fast operation and anti-shake protection. The dashboard phone mount also features a swivel ball that provides 360-degree viewing angles.
• Dual Release Button & Adjustable Feet: The car phone holder has 2 release buttons for easy operation with left and right hands. The feet at the bottom are designed to be adjustable to hold phone models of various sizes and enhance stability

User questions & answers

Question:	How does the mount perform when the car is running through bumpy road
Answer:	This goes on the back of a car headrest. Not meant for a bike.
Question:	I put the suction part too close to the gearshift, how do I take it off and readjust it
Answer:	Yes, these will fit most ALL vehicle cup holders.
Question:	Does the unit leave marks on the dashboard
Answer:	These are standard size coasters for car cup holders. They should fit. Measure the circumference of the opening of the car’s cup holder.
Question:	Can you charge your phone while it’s being held
Answer:	They should!

Product features

Unobstructed Side Buttons

The telescopic bottom feet are designed for smartphones ranging from standard sizes to plus sizes, thereby avoiding blocking the phone's volume/power button. Besides, stability can be optimized by adjusting the feet.

Case-friendly Design

The clamps of the cell phone holder are compatible with various phone cases, such as otterbox cases, wallet cases, leather cases and most phone cases. Note: The total thickness of the phone and the case should be less than 15mm (0.6in)

All-Around Protection

There are silicone cushions on the side arms and bottom feet, which can keep your phone stable and secure. You don’t have to worry about your phone falling out whenever you are driving across uneven roads.

Unique Safety Lock

Featuring a quick flip lock instead of adjusting knob, which not only saves time and effort, but also minimizes the vibration of the gooseneck while driving, so that the suction cup can hold more firmly

140° Adjustable Arm

The arm can pivot up or down for 140 degrees for a variety of viewing angles, which allows you to readily see and reach the screen, and keep your phone at a comfortable position while you drive

Landscape or Portrait Mode

The mount can be flexibly tuned to display at an optimal viewing angle, either in landscape or portrait mode. It’s much easier and safer for you to get directions, play music, or take phone calls.

Product description

Wide Compatibility

iPhone: 11 Pro Max / 11 Pro / 11 / Xs / Xs Max / XR / X / 8 Plus / 8 / 7 Plus / 7 / 6s Plus / 6s / 6 Plus / 6 / SE / 5s / 5c / 5/J7/J6/J5/J3;

Galaxy: Note 10/ Note 10+/ S10 / S10+/ Note 9 / S9+ / S9 / Note 8 / Note 5 / S8+ / S8 / S7 / S7 Edge / S6+ / S6 / S5;

Google: Pixel 4 XL/4/ 3 XL / 3/ 2XL/ 2/ XL/ Pixel, Nexus 6P/ Nexus 5x;

LG: G7/ G6/ G6 Plus/ V30/ V30 Plus/ V20;

Xiaomi: Redmi Note 8/ Note8 Pro/ Note 7

One Plus: 7T/ 7T Pro/ 7 Pro/ 7/6T

Motorola: P50/ P30/ G7/ G7 Plus/ G7 Power/ G6

Huawei: P30/P30 Pro/P20/Mate 20 Pro/P20 Lite/P10/P9/Nova/Honor 10；

Sony, HTC, Nokia, Motorola, Blackberry and more smartphones



Warm Prompts

1. Make sure there is a CD slot in your car before purchase.

2. Not suitable for ultra-wide, closed-type, or irregular CD slots.

3. It is recommended to remove the thick/bulky phone stand holder on the back of the phone/case.

4. When inserting or ejecting a CD, you have to remove the CD slot phone holder first.

• CONVENIENT FOR GPS NAVIGATION AND CALL- MPOW car phone mounts are essential to keep car drivers safe on the road by allowing drivers to keep both hands on the wheel and keep an eye on GPS navigation. The cell phone car mounts reduce the likelihood of accidents that can harm you and your passengers.
• PHONE COMPATIBILITY-The arms extend from 1. 8in. /4. 5cm to 3. 8in. /10cm. The 0. 6in. (1. 5cm) deep arms work well to hold models from 4. 7’’~6. 8’’, even with a thin case on, including but not limited to the new iPhone 12/12Mini/12Pro/12Pro Max/11 Pro Max/11 Pro/11/Xs Max/XR/XS/X/8 Plus/8/7 Plus/7; Galaxy Note10+/Note10/S10/S10e/S10+/S9+/S9/Note 9/Note 8/S8; Pixel/Nexus; LG; OnePlus; Xiaomi; Moto and more.
• CD SLOT MOUNTS-Does your car CD player go unused? Make it functional again with MPOW phone holder. The base slips into your CD slot; then, it expands and locks into place, so your phone is always safe and stable. NOTE: Flip over to install for wider compatibility with different cars.
• THREE SIDES GRIP DESIGN- MPOW car phone mount has three side grips to hold your device in place. A little button along the sides can be pushed which prompts the phone to pop out of the mount. What’s more, you get a 360-degree rotation for great viewing angles.
• FITS 99% OF THE CD SLOTS: The car mount base won’t damage your CD slot, and can have its width customized for a secure fit by turning the knob, making the CD slot mount suitable for most vehicles with a standard CD player. You can still listen to CDs with the mount installed.

Product features

Foldable Supporting Feet

In the bottom of the clamp, you can see two supporting feet, which is designed as foldable for various situations. The distance between the feet is widened to 1.8 inches, allowing a convenient access to charging port and home button.

Reliable Mount Stability

To ensure the maximum security of your phone and the stability of the phone holder, there are 3 anti-skid rubber pads come with the phone mount. Please make sure of sticking the rubber pads on the CD connector before using it.

Compatible with More Cars

Thanks to the 360° rotatable ball joint, not only the clamp but also the base are rotatable. Some cars have the screen or buttons above the CD player, others have them below the CD slot. You can install either side up or down to fit your car.

Product description

The main advantages of the windshield car phone holder:



1. Washable suction cup: When the suction cup is covered with dust and affects the adsorption performance, you can restore the adsorption performance by washing with water



2. High-quality gooseneck: the gooseneck is 9 inches long and can be bent to adjust the viewing angle



3. Ball joint design: You can adjust the viewing angle by rotating the ball head, and then tighten the nut to fix it



4. One-click release button: the clamp arm can be opened by pressing the side button, and the clamp arm can be extended to 3.7 inches, which is compatible with large-size mobile phones



5. Sponge pad protection: we attach a sponge pad inside the car phone holder to protect the phone



6. Foldable car phone holder feet: If you want to place the phone horizontally, you can fold up the car phone holder feet, so that you can adjust the phone left and right to change the center of gravity and better hold the phone

• High Quality Aluminum Gooseneck: The aluminum gooseneck of the high-quality car phone holder is 9 inches long. You can adjust the viewing angle by bending the gooseneck. We have included a stabilizing device in the package to fix the gooseneck to prevent shaking
• Upgrading the Suction Cup of Car Phone Holder: We upgraded the material of the suction cup of the car phone mount from PVC to TPU, thereby greatly improving the heat resistance and stability of the suction cup, at the same time, we increase the hardness of TPU from 70 to 75, so that the suction cup is not easy to deform
• Washable Suction Cup: When the suction cup is covered with dust and affects the adsorption performance, you can restore the adsorption performance by washing with water
• Compatible with 4-6.9 inch Mobile Phones: You can press the button on the left to open the clamp arm. The clamp arm can be extended to 3.7 inches to hold larger phones. With a powerful suction cup, you can easily hold 4-6.9 inch phones, such as iPhone 11 Pro Max , Xs Max, Xr, X/8/7/6 Plus etc
• Flexible Adjustment of Viewing Angle：You can adjust the viewing angle of the car phone holder in two places, one is to bend the gooseneck, the other is to rotate the ball joint, the ball joint can rotate 360 degrees, and finally tighten the nut to fix the position.

Product features

MPOW Windshield Long Arm Car Phone Mount

• Fits any cellphones with screen between 4.0’’ & 6.5’’ perfectly even with protective cases (Case should be within 5mm). Save your trouble of taking off the phone case.
• Made of high-quality aluminum, the long flexible arm makes the device closer to your sight for more comfortable and safer driving. The car mount will not block your view whilst driving as you can adjust it to any desired angle.

Not Only Works in Car

You can not only use it in your car for holding phone but also at your office or at home for Facetime with others, hands-free call, and watching movie, etc

Upgraded Strong Suction Cup

Upgraded to TPU material, now the strong suction cup has better heatproof performance and more stable installation even during hot Summer. Simply toggle the switch up/down to install/uninstall the long arm

Washable & Reusable

When the suction cup become non-sticky and dirty, you can rinse it with water then air dry. By doing so, it will adsorb tighter to the windshield or other smooth surfaces.

• Ultra-long Gooseneck: The gooseneck has been upgraded to 20.3cm (8in) long, allowing you to easily view and touch the phone screen without having to stretch your neck and hands. The length means that the holder is universal for any car model, such as pickup, trucks, SUVs, sedans, etc.
• Compatible with Most Phones and Cases: The windshield car phone mount holds phones with 4.0"~6.9" displays and up to 10.3cm/4.1in wide, including iPhone SE 2020/11/11 Pro/XS/XR, Galaxy Note 20/Note 20 Ultra/S20 Ultra/S20+/S20, etc. Also, it works with otterbox and more cases up to 15mm (0.6in) thick.
• Super Strong Suction Cup: The heat-resistant TPU suction cup, which sticks to the windshield, is combined with a sticky stabilizer that sits on the dashboard. Between these two points of contact, your phone will not wobble or fall whenever you are driving on rough roads.
• Flexible and Sturdy Gooseneck: Boasting flexible gooseneck and 360° ball joint, the windshield car mount enables you to view your phone from all possible angles, either in portrait or landscape mode. The gooseneck is flexible yet rigid enough to stay in place once you’ve got it where you want it.
• Adjustable Feet & Dual Release Button: The feet, at the bottom of the cradle, can be moved up and down to fit phones of all sizes and avoid blocking its side buttons. Also, both sides of the cradle are designed with release buttons, which means you can operate with left and right hands.

User questions & answers

Question:	What is the diameter of the ball at the end of the arm
Answer:	Yes. You have to push the piece on there and then screw it together
Question:	can the upgrade model be used on dashboard
Answer:	I don’t know. But I DO NOT recommend this product. It does NOT stick. Suction DOES NOT work
Question:	Does this fit iPhone 12Pro Max
Answer:	All phones
Question:	Does this fit samsung A
Answer:	It will fit all phones

Product features

Adjustable Bottom Feet

The 2 feet at the bottom of the car phone holder can be moved up and down to accommodate phones and cases of all sizes. Furthermore, this user-friendly design can also provide more stability and security for large phone models.

More Stability, Less Vibration

With the use of the additional anti-shake stabilizer, the gooseneck will not wobble even if it has a long length. This small stabilizer can provide a strong hold and reduce the vibration of your device during bumps.

Flexible and Rugged Gooseneck

The windshield car mount boasts a sturdy gooseneck, which has a 13mm thickened aluminum alloy inner tube, it can support heavy device without shaking while driving, and can enable 10000+ bend lifespan for long-term use.

Unobstructed Charging Port

There is enough space between the 2 bottom feet of the windshield car phone holder, allowing your smartphone’s charging port to remain clear, unblocked, and accessible. You can charge and unlock your phone easily on the road.

Tested by Extreme Weather

Made with high-quality TPU material, the suction cup is resistant to high and low temperatures and not easily deformed, so it is strong enough to last through hot and cold days and stay in place on the windshield.

Easy to Assemble and Install

Step 1. Unscrew the nut

Step 2. Pass the nut through the ball head Step 3. Push the ball head into the jointStep 4. Tighten the nut

Product description

The role of the car phone holder is mainly to provide a carrier for the mobile phone. By fixing the mobile phone to the car phone holder, you can use mobile phone navigation, video and voice calls, etc.



Product features of this car phone holder:



1. Upgrade the car mount arm, change the curved clamp arm to the rectangular clamp arm, change the center of gravity of the clamp arm, and better hold the mobile phone



2.The car phone mount is compatible with phones up to 6.8 inches, including iPhone 11 Pro Max, XS Max, XR, X, 8/7/6 Plus; Samsung Galaxy S10, S9, S8, Note 9/8/7 and more



3. Upgrade the clip of the car phone mount, the 3-level adjustable clip is easy to install and disassemble, the clamping force is stronger, and it can be better fixed in the vent



4. Ball joint design, you can rotate 360 degrees through the ball joint until the comfortable angle of view



5. We have reserved enough space for the charging cable between the two car phone mount feet to ensure that the phone can be charged normally.



6. On the surface of the product, the inside of the clamp arm and the car phone mount foot are attached with a sponge pad and a silicone pad to reduce the friction of the mobile phone and the mount, and protect the mobile phone.

• Adaptable to Most Phone Sizes: The phone holder expands up to 95mm/3.7in wide, holds most phones with screen sizes between 4.7’’ and 6.8’’, including iPhone Xs Max/XR/XS/X/8 Plus/8/7 Plus/7/6 Plus/6/6s Plus/6s; Galaxy S10/S10 Plus/ S9 Plus/S9/Note 9/Note 8/S8/S7/S7 Edge/S6 Plus/S6; Pixel/Pixel 3 XL/3/2XL/2/XL; LG; BLU; Xiaomi; Moto and more. TIPS: Supports phone case thickness up to 13 mm / 0.5 inch.
• Upgraded Arms for Secure Hold: The side arms have been upgraded for stronger stability. Compared with the old version, the center of gravity of the arms has been shifted up so that your phone stays put without wobbling. There are sponge pads on side arms, which will protect your device from falling out and scratching.
• Stays Put Without Falling Off: Featuring inner Manganese Steel plates and durable PC material, the extended vent clip will stay in place regardless of the road conditions. The spring-loaded vent clip is equipped with an adjusting lever, providing you with 3 different tightness. 1st level: 2.5 - 3.5mm; 2nd level: 1.8 - 2.5mm; 3rd level: ＜1.8mm, fits most vertical or horizontal vent louvers.
• Easy One-Handed Operation: The car phone mount has a quick-release button on the back. There is no need to expand the arms with your hands, just place your phone in the holder and squeeze the arms to hug your devices. Also, you are allowed to remove your phone without hassle. There is space between the bottom feet for you to attach a phone charger.
• Keep Your Phone in Sight: The 360 degrees ball joint ensures that you hit the sweet spot every time you place your phone in the car phone holder. You can get the comfortable viewing angle by adjusting the mount up/down or vertical/horizontal. The air vent-mounted car mount enables you to access your GPS, music and all controls easily without blocking your vision while driving.

Product features

Mpow universal air vent car phone mount

Mpow air vent car phone holder has been designed to fit most car air vents due to its three-level thickness settings. With Mpow car mount, you will free your hands from holding smartphones and improve driving safety without blocking your sight.

Reserved Charging Port

At the bottom of the cradle, there’s a reserved space. It is the perfect size for a phone charger to go through. Don’t have to take your phone out of the cradle.

Fits the vast majority of smartphones easily

The stretchable clamp can hold devices with a size of 4.0 - 6.8 inches, perfect for iPhone, Galaxy, Google Pixel, BLU, OnePlus, Motorola, LG and so on.

Adjustable Angles

Fully adjustable with 360-degree rotation for viewing your device at the right position. Change your perspective with a simple ball-and-socket joint.

• Advanced Bluetooth 5.0: With Bluetooth 5.0 technology, ensure faster and stable connection; Pair easily with any 2 Bluetooth devices at one time; Roam range up to 30 feet from paired Bluetooth devices; Meet all your needs of calling
• Built for Clear Chat: Superior cVc6.0 noise-canceling microphone blocks out unwanted noise; The mic is also adjustable to pick up your voices loud and clear; Provide crystal clear conversations even in a noisy environment
• Long Battery Life: Offer up to 16 hours continuous talking time and 200 hours standby time with single fully charged in just 2 hours; Get enough juice to keep you productive all-day
• Lightweight Comfortable Design: The headset weights 1.6 oz，lighter than an egg; Enjoy extended comfort with padded earpad and flexible headband; Feel no burden during longer working sessions; The over the head Bluetooth headset can be worn over the right or left ear according to your preferences
• Comply with FCC Regulations: FCC ID 2AMH2-MBH15; This equipment has been tested and found to comply with the radio frequency devices; Our Bluetooth headset is not only designed for calling but also support listening to music; Great idea for driver, call center, Skype chat, conference calls, webinar presentations and more

Product features

Are You Ready for Remote Working?

Nowadays, many companies have made arrangements to accommodate remote working to help limit the impact on productivity. If you're looking for the ideal business headset for making and receiving business calls, then you can’t go wrong with Mpow Pro Bluetooth 5.0 business headset. Based on the previous version, we have made improvements in sound, Bluetooth connectivity, and battery life to give you an elevated experience.

Bluetooth 5.0 Connectivity

Compared to Bluetooth 4.2, Mpow Bluetooth 5.0 headset features 0.6X power consumption, 2X speed and 8X data capacity. Mpow Bluetooth 5.0 business headset is widely compatible with smartphones, computers, iPad, tablets, and other Bluetooth-enabled devices. Support dual-connection so you can enjoy your music and never miss any phone calls.

All-day Conversation

Whether you are busy in your remote working or preparing for a long-haul driving, Mpow wireless Bluetooth headset will never let you down. The 16-hour battery life give you enough freedom and juice to do what you want. Put on Mpow Bluetooth 5.0 headset, then you can stay productive and efficient all day. Perfect for office, remote working, call center, trucker driver, etc.

330° Rotatable Microphone

Mpow over-the-ear headset is will give you ultimate wearing experience. You can freely adjust the microphone to the perfect angle to capture your voice louder and clear. The reversible design allows you to place the headset on either your right or left ear. Ideal for driving, call center, Skype chatting, conference calls, office, webinar presentations, etc.

Voice Assistance Activation

Press and hold the MFB for 3 seconds to activate your voice assistance. Access Siri or Google Voice to make phone calls, listen to music, set reminders, and more.

Considerate Mute Function

Mpow office headset is designed to give you more freedom and privacy. Double click the MFB to freely block your voice during a cellphone call when needed.Notice: Mute function only supports on cell phones at present, we are working on this feature so that it would be used on PCs in the future.

Clear Hands-free Calls

Mpow truck driver Bluetooth 5.0 headset allows you talk clearly and drive safely at the same time while keeping your hands on the wheel.

Product description

Multiple usages



mpow phone holder, with washable and reusable suction cup, can be mounted here and there as a dashboard mount, windshield mount or desk mount, releasing your hand from holding the phone, caring for your driving safety and making your life more convenient.

installation



1. Clean the dashboard or other smooth surface.

2. Stick the mount onto the surface and press down the locking lever.

3. Adjust support arm's length and cradles angle.

4. Press the release button to open the clamp and set the phone.

notes:



1. Please clean the dashboard before installation for a stronger hold.

2. Please not install the mount on windshield in summer, As high temperature would impact stickiness.

3. Please remember to lock the cup After installation.

specification



name: Mpow dashboard car mount



color: black



net weight: 161g



clamp width: 56-100mm/2.2-3.9In



support arm length: 107-150mm/4.2-5.9in.

package contents



mpow Mount×1

• Upgraded and stronger suction cup: the suction cup has been upgraded for stronger hold and heat resistance, works on dashes and Windows. It has a coating of sticky gel that prevents air gaps from forming and ensures a longer-lasting hold. 2-Level locking lever allows for a secure hold on smooth or textured surfaces. If the suction cup gets dirty or loses its stickiness, the trick to restoring its sticky surface is to wash it with water and let it air dry.
• Hold the newest phones: The arms extend from 5.6cm/2.2in. To 10cm/3.9in, which securely hold phone models up to 6.8 inches, including iPhone 11 Pro Max/11 Pro/11/XR/XS/X/8 Plus/8/7 Plus/7/6 Plus/6/6S Plus/6S; Galaxy Note 10+/Note 10/S10/S10 Plus/S9 Plus/S9/Note 9/Note 8/S8/S7/S7 edge/S6 Plus/S6; Pixel/Pixel 3 XL/3/2XL/2/XL; Nexus 6/6P; OnePlus7 Pro/7/6T; Xiaomi; Moto; LG; Note: the thickness of the phone case should not exceed 0.5in./13mm.
• View your phone at any angle: The 360° ball-and-socket joint lets you tilt and turn your phone to portrait or landscape mode. The car mount can be customized for your preferred viewing angles with a telescopic arm, which extends from 4.2in./10.7cm to 5.9in./15cm and pivots 270°. The solid arm enables your phone to be easily reached and creates low vibration even on bumpy roads.
• Easy one-handed operation: The quick-release button is designed to pop your smartphone in and out without hassle. Simply press the button on the back and the arms open automatically, allowing you to mount or remove your phone in seconds with just one hand. Easy to install and remove, the dashboard car phone mount can also be easily moved from vehicle to vehicle.
• Note: once the product is fixed, try not to move, keep Good sealing, prevent air from entering the suction cup. If you have to move, please press the suction cup base first, exhaust The Air, and then adjust the Gear. Tip: sprinkle a little water in the place where the sucker is fixed, and the fixity is better.

User questions & answers

Question:	My phone is 3.75 inches wide (9.5 cm) will this go that wide
Answer:	No, fully open it is 3.25" but there is some give with the pads. I think it would be too tight a fit for you.
Question:	Will this work with a pop socket on the back of my phone
Answer:	I have a case on my phone and it has a little more room to give.. so most likely... case and pop socket most likely not
Question:	Will this hold my phone with the case on it
Answer:	I have a Samsung S10e with a case and there is plenty of room. I did some measuring, and a phone and case that is 1/2" thick would be about all it would hold. The adjustable side holders are angled in and have soft rubber, so it grips pretty well. The bottom holder is also angled up. I would say it is well designed.
Question:	Will this fit for the iphone 12 pro
Answer:	Yes!! It fits the iPhone 12 Pro fine!

Product description

Q1: Will this charge while having an otter box cover or pop holder on the phone？



A1: No. The induction distance between the wireless car charger and the smartphone cannot exceed 4mm. Thick phone cases and pop holder will interfere with the wireless charging.



Q2: Will this provide 10W fast charging for the Pixel 3?



A2：Yes. It’s also working for these phones:



iPhone 8/8 Plus/X/XS/XS Max/XR/11/11 Pro/11 Pro Max



Xperia Z3v(D6708)/XZ2/XZ2 Premium/X23



G2/G3/G6/G6+/G7/G7 ThinQ/G7+ ThinQ/G8/G8 ThinQ/V30/V30+/V35/V40 ThinQ/V50/V50 ThinQ/LG Lucid2(VS780)/LG Optimus FS(AS780)/Optimus Vu 3/Optimus G Pro/Optimus VC11/Optimus LTF/Stectrum 2



Nole 5/7/PE/8/9/10; S7 Edget/S8/S8+/S8 Active/S9/S9+/S10/S10e/S10 SG/S10+/S20 Series



Pixel 3/3XL/4/4XL



Q3: When I turn off the vehicle(car power), can the holder's arm be released automatically or manually, so I can take my phone out?



A3: Yes, you can remove your phone by pressing the side buttons after the vehicle is off. (It is recommended to remove the phone immediately, or the arm will not work due to the delay).



Q4：Does this charger turns off when the car engine is turned off? Will it drain my car battery if left plugged in?



A4：No. When the car engine is turned off, the charger will also be turned off and the power supply will be disconnected.



Q5：Is there a USB-C connector at one end of the cable and a USB-A connector at the other end? Is the USB-A end plugged into the power adapter?



A5: Yes. Plug the USB-A end of the cable into the power supply, and the USB-C end of the cable into the car mount.



Q6：What is the point of wireless charging? You still need to plug in the mount. What am I missing?



A6: The phone is wirelessly charged through the mount, but you still need to draw external power via cable. You don't have to finagle to hook up your phone to a cord every time or worry about the port being damaged.

• FAST WIRELESS CHARGING UP TO 10W-10W fast charging for Galaxy Note10+/Note 10/S10+/S10/Note 9/S9+/S9/S8+/S8/Note 8/S7 edge+/S7/S6 edge+/S6 edge/S6+/S6/Note 5; 7. 5W fast charging for iPhone 11 Pro Max/11 Pro/11/XS Max/XS/x/XR/8/8 Plus (10W/7. 5W fast charging requires a QC2. 0/3. 0 adapter); 5W standard wireless charging for other Qi-enabled Phones (5V/2A adapter is required) The adjustable support Foot helps align different sizes of phones for efficient wireless charging.
• AUTO-CLAMPING ARMS-The automatic-clamping feature enables you to mount or retrieve your phone with one hand motion. Just tap one of the two release buttons on the side to open the arms automatically（NOTE: when the power is connected） once the phone is in the arms will automatically close to secure your phone. The built-in energy storage setting allows you to open the arms to take your phone out within 10s-20s even after the power supply is disconnected or your car is stalled.
• TWO INSTALLATION METHODS-The car mount can be installed on the vehicle’s dashboard And air vent with the included suction cup base and air vent clip. The strong suction cup base with sticky gel and anti-shake stabilizer keeps the mount securely on the dashboard without wobbling.
• FLEXIBLE AND LONG GOOSENECK-Unlike the conventional stand-up dashboard car mount This innovative mount lies on the dashboard without blocking your line of sight. The 15cm/5 9in aluminum gooseneck brings your phone closer to you for better and easier access to your phone’s functions. What makes us unique is that the sturdy yet flexible gooseneck can be bent to avoid obstructing the display and irregular vents.
• QI STANDARD AND FOD FUNCTION-The Qi wireless charging technology and large coil maximize the charging output and efficiency making charging faster than standard wireless chargers. The built-in intelligent chip provides over-charge/temperature/voltage/current protection to safeguard devices and users With FOD (foreign object detection) and smart LED indicator. The red light indicates that it is charging normally while a flashing red means it is not working properly.

Product features

Automatic Clamping Feature

Press the button on either side and the “robotic” arms will automatically open, just slide your phone into the phone holder, the arms will automatically close to secure the device and charge instantly.

Wide Compatibility

The arms extend from 5.7cm/2.2in to 8.9cm/3.5in, meaning that it works with any wireless-charging-enabled phone. As long as the thickness of the phone case is less than 4mm, you can charge with it on.

Safe Qi Wireless Charging

The wireless car phone mount holder is equipped with the built-in large coil to maximize the charging speed, and it has safety protection against overcharge, overcurrent, short circuit, and temperature control.