12 best tablet mounts for car vehicles

• HEAVY DUTY - The TabDock Bizmount AMPS is a heavy duty Multi-Angle Drill Base pedestal mounting solution for Tablets. It is designed to install directly on a table, cart, desk, in a vehicle, or on any flat surface. The TabDock Bizmount AMPS allows you to mount your tablet where you need it most.
• STURDY- Has four points of contact holding on your phone and works with most cases including life proof and otter box cases. TabDock AMPS mount is incredibly strong and will stay where you mount it.
• UNIVERSAL DESIGN - fits all Tablets 7"-10". ( iPad , Nexus , Sony Xperia , Kindle , Samsung Galaxy Tab ). This kit includes: TadDock tablet Holder, 5” dual ball joint adjustable pedestal, screw pack and adhesive for drill base. Features 1-inch / 25mm / B Size Ball joints that are compatible with all industry standard 1 inch / 25 mm / B size adapters and arms.
• GREAT FOR BUSINESS OR PERSONAL USE - Works with most smooth surfaces, in a vehicle or a building. Has 2 adjustable points for optimal viewing positions. The TabDock Bizmount AMPS is great for business, homes, vehicles, or schools.
• ADJUSTABLE - Rotates 360 degrees for optimal viewing positions. The 2 adjustable points offer freedom to completely adjust the arm to the optimal viewing position.

User questions & answers

Question:	Will it hold iPhone 7 plus
Answer:	I don’t know the exact dimensions since fire tablets appear to have several sizes, but it takes my iPad pro and it’s in the ballpark size for that, so probably you can use it.
Question:	Anyone know if this will hold an sg tab e 8.0 in a protective case
Answer:	Yes I believe so,I have a ASUS TABLET 9.6 and I have plenty of room on it. I think it goes up to 10.5,try it out what you have to lose. I love mine.
Question:	Does this come with self tapping screws
Answer:	I have used it in a CRV on mountain roads. The thumbscrew can loosen with the bouncing and vibration. If you put come locktite thread locker on the thumbscrew threads it will stay in place and stable. You can get locktite at almost any hardware store for about $4 per tube. The mount is great other than the screw loosening issue.
Question:	W/D/H dimensions of bolt down mounting plate
Answer:	Not strong enough to support anything but a mini tablet or phone.

• [Vast Compatibility] -- Utilizing an adjustable loading button and a revoltionary spring locking system for most 7-11 inch tablet: iPad 2019 2018 2017 9.7" 10.2", iPad mini 5 4 3 2 1, iPad Pro 9.7"/10.5", iPad air 3 2 1, iPad 7 6 5 4 3 2 ▶ Samsung Galaxy Tab S6 S5e S4 S3 S2 S E A 4 3 2 Pro (7 inch-10.5 inches), ▶ Asus Zenpad and more /// tablet mount for car, tablet mount for truck, ipad holder for car, ipad car mount, car tablet holder, tablet car mount, ipad car holder, car ipad holder
• [Also A Suction Cup Phone Mount] -- Works for nearly any cell phone, such as iPhone 11 11Pro 11ProMax XSmax XS XR X 10 8+ 8 7+ 7 SE 6S+ 6S 6+ 6 5S, Samsung Galaxy S10 S10+ S10e S9 S9+ S8+ S8 S7 Edge S6 S5 S4, A9 A8+ A8 A7 A6+ A6 A5 A3, C9 Pro C8 C7 C5, J8 J7 J6 J5 J4 J3 J2, Note 10+ 10 9 8 6 5, Google Pixel 4 4XL 3 3XL 2 2XL 1 Phone Nexus 6 6P 5X, Oneplus 7Pro 7 6T 6 5T 5 3T 3 2 1, and other 4-7 inch Cell phone. ▶ Cable hole design, good for charging your phone.
• [Flexible Long Arm] -- Premium extra lengthen long arm made of thick rubberized Aluminum pipe up to 13 inches, make your tablet/cell phone close to you for your easy reach and operation. ▶ Especially useful for windshield and unevenness dashboard.
• [Strong Sticky Suction Cup] -- Two-stage locking suction cup has a sticky gel pad sticks securely to most flat surfaces, like dashboard, wall, table, windshield, window. ▶ It can be restored to its mint condition by rinsing it with warm water and allowing it to air dry.
• [Super Hands-Free Navigation] -- It is amazing to have a larger screen for hands-free navigation during your road trip and spend more time at the wheel and eyes on the road. ▶ Full 360 degree rotation and swivel for your perfect viewing angle. ▶ It is also perfect for off-road entertainment when taking a break on the road trip.

Product features

Car Suction Cup Mount for 7-11 inch Tablet

Utilizing an adjustable loading button and a revoltionary spring locking system for nearly any tablet, APPS2Car's Suction Cup Tablet Mount will meet your in-car tablet needs. It is amazing to enjoy hands-free navigation with a large screen. And it is also perfect for you to enjoy movie with your tablet when take a beak on the road trips.

First Class Design

Made with precise structure and high quality material, perfect for durable use.

Adjustable and Secure

Gear loading side will let you adjust it to fit most tablet & cell phone. Spring loading side will secure your device and keep it in place.

Steady Two Side Grips

Keep your tablet / cell phone in place even in the bumpiest road, no drop worry. Rubber padded clamp is zero scratch.

Easy to Charge Cell Phone

Allows charging cell phone while two sides grip protecting it from falling off even on bumpy road.

Full Rotation for Angles of View

Full 360 degree rotatable for your perfect viewing angle, clearing up the car's windshield, and it won't block your view of the road.

Flexible Gooseneck Arm

13 inch gooseneck allows you to bend the arm to any angle or shape you want, and mounts your tablet/cell phone close to you for your easy reach and operation.

Premium Bendable Arm

Made of thick rubberized Aluminum pipe, and it is 0.43 inch in thicknes, ideal for steady use.

Reinforced Sticky Suction Cup

Two-step lever is easy to attach the suction cup mount securely with ultra suction power loading gear. Suction Cup can be restored by simply rinsing under warm water and air drying.

Product description

Securely mount your tablet on the go with the Celled tablet cup Holder mount with 360 degree rotation. This cup Holder mount is equipped with a heavy duty adjustable base. Simply place the base into the cup Holder, turn dial to extend Wings to fit into cup Holder if needed, the place your tablet onto the mount. Celled Tablet mount and holder is equipped with soft Holder grips/back to protect your tablet from any scratches. This cup Holder mount provides a 360 degree rotation, Compatible Tablets Apple iPad, iPad Pro 12. 9-inch, iPad Pro 11-inch, iPad Pro 10. 5-inch, iPad 9. 7-inch, iPad Mini 4, iPad Pro 10. 5-inch, iPad (6th Generation), iPad Pro 12. 9-inch (2nd Generation), iPad Pro 12. 9-inch (1st Generation), iPad Pro 9. 7-inch, iPad (5th Generation), iPad mini 3, iPad mini 2, iPad mini, iPad Air 2, iPad Air, and All Galaxy Tab S4, Tab S3, Tab S2, Tab S, Tab A, Tab A 8. 0, Galaxy Tab E, Galaxy Book Tab S3 9. 7, Galaxy Tab A 10. 1 / 9. 7 / 8-Inch / 7. 0, Galaxy Tab E 9. 6, Galaxy Tab 4 10. 1 / 7. 0 /8. 0, Tab S2 9. 7 /8. 0, Galaxy Note 10. 1 Edition 2014, Galaxy Tab 3 Lite Kids Edition LG G Pad F2 8. 0, HP Elite X2 1012 G1: Verizon Gizmo Tab, Verizon Ellipsis 8 HD: Alcatel Pixy 3, A30 Tablet 8 inch: Toshiba Excite Go AT7-C8 7. 0-Inch: Astro Tab A935 9 Asus Zen Pad Z10, Asus Zen Pad Z8s: Neeta Air7, N7S Pro 7 inch : Nintendo Switch Tablet Sony Z4 10. 1: rule expr X1a 9-inch, Walk book 2 end 1 Tablet 10. 1 Kindle Paper white, Kindle E-reader, Kindle Oasis, Fire 7 , Fire HD 8, Fire HD 10Dragon Touch X10, Touch Y88X Plus, Touch X9, Touch A1X Plus II 10. 1Asus Zen pad 3S 10 Z500KL, Zen pad 3 8. 0 Z581KL, Zen pad Z10 ZT500KL, Zen pad 3S 10 Z500M, Zen pad Z8, Zen pad Z300C 10, Zen pad 10 Z300M, Memo Pad 10 ME103K, Zen pad 8. 0 Z380M, Transformer Pad TF103C, ZENPAD Z170C 7-inchAcer Ionia Tab 10 A3-A40, A3-A30 10, Ionia One 10 B3-A10Lenovo Tab 4 10 Plus, Tab 4 8 Plus, Tab3 8 Plus, TAB A10-70, Tab 2 A10-70, Tab 2 A7 7-Inch, Moto Tab, Yun tab V101H 10. 1-inchGoogle Chromebook, Pixel Book, Pixel Slate: HTC Google Nexus 9

• Stable viewing platform due to extra-strength 10 inch arm (13'' total height) ; Simple to install - adjustable base fits perfectly. Base can fit vehicle cup holders from 2. 86 inches up to 3. 47 inches. 13. 5 inches refers to the extended arm fully erected; Protective- soft holder grips/backing will not scratch your Device ; Flexible- 360 degree rotational capability from cradle
• Universal fit compatibility: mount your 2017 Apple iPad Pro 9. 7, iPad air 2, iPad 3, 4, iPad air, iPad mini 4, 3, 2, 1 or other tablet such as Samsung Galaxy Tab, Tab s, Galaxy Note 10. 1 and 8. 4,
• Compatible for Apple iPad, iPad Pro 12. 9-inch, iPad Pro 11-inch, iPad Pro 10. 5-inch, iPad Pro 9. 7-inch, iPad 9. 7-inch, iPad Mini (4, 3, 2, 1) iPad (6th 5th 4th 3rd 2nd 1st Generation), iPad Air (2, 1) and All iPads LG G Pad F2 8. 0, HP Elite X2 1012 G1 Kindle, Paper white, Kindle E-reader, Kindle Oasis, Fire 7 , Fire HD 8, Fire HD 10 Dragon Touch X10, Touch Y88X Plus, Touch X9, Touch A1X Plus II 10. 1
• Compatible for Samsung Galaxy Tab S4, Tab S3, Tab S2, Tab S, Tab A 10. 5, Tab A 8. 0, Tab E, Galaxy Book Tab S3 9. 7, Galaxy Tab A 10. 1 / 9. 7 / 8-Inch / 7. 0, Tab E 9. 6, Tab 4 10. 1 / 7. 0 /8. 0, Tab S2 9. 7 /8. 0, Galaxy Note 10. 1 Edition 2014, Galaxy Tab 3 Lite Kids Edition
• Compatible for Asus Zen pad 3S 10 Z500KL, 3 8. 0 Z581KL, Z10 ZT500KL, 3S 10 Z500M, Z8, Z300C 10, 10 Z300M, Z170C 7-inch, Z8s, 8. 0 Z380M, Memo Pad 10 ME103K, Transformer Pad TF103C, Acer Ionia Tab 10 A3-A40, A3-A30 10, Ionia One 10 B3-A10 Lenovo Tab 4 10 Plus, Tab 4 8 Plus, Tab3 8 Plus, TAB A10-70, Tab 2 A10-70, Tab 2 A7 7-Inch, Moto Tab, Yun tab V101H 10. 1-inch Google Chromebook, Pixel Book Nintendo Switch Tablet Sony Z4 10. 1 rule expr X1a 9-inch, Walk book 2 end 1 Tablet 10. 1 HTC Google Nexus 9 Neeta Air7, N7S Pro 7 inch Astro Tab A935 9 Toshiba Excite Go AT7-C8 7. 0-Inch Alcatel Pixy 3, A30 Tablet 8 inch, Verizon Gizmo Tab, Verizon Ellipsis 8 HD

User questions & answers

Question:	will it fir in a 1990 corvette holder
Answer:	Yes but it won't fit an iPad with a protective cover
Question:	I just ordered a new Iphone 6 plus will it fit this holder
Answer:	Yes the ikross 2 in 1 can hold the 10.1 with and without the cover no problem
Question:	Is this compatible with a bmw x
Answer:	As of the New Year (2017), here in the People's Republic of California, this would be considered a legally acceptable mount. One would still not be absolved of any liability, however, if it was proven the driver was distracted from said iOS/Android device. Driver be aware.
Question:	Why has the price on the cupholder version doubled from what it used to be? i purchased this item for $16.00 previously
Answer:	Yes. You can use duct tape. Use enough and it should be secure. Or you could buy a windshield mount. But duct tape would look so much cooler.

Product features

Works with All Tablets and following

Compatible Tablets

• Apple iPad iPad Pro 12.9-inch iPad Pro 11-inch iPad Pro 10.5-inch iPad Pro 9.7-inch iPad 9.7-inch iPad Mini (4 3 2 1) iPad (6th 5th 4th 3rd 2nd 1st Generation) Air (2 1) and All iPads
• Samsung Galaxy Tab S5e S4 Tab S3 Tab S2 Tab S Tab A 10.5 Tab A 8.0 Tab E Galaxy Book Tab S3 9.7 Tab A 10.1 9.7 8-Inch 7.0 Tab E 9.6 4 10.1 7.0 8.0 S2 9.7 8.0 Note 10.1 Edition 2014 Tab 3 Lite Kids Edition
• LG G Pad F2 8.0 HP Elite X2 1012 G1 Amazon Kindle Paper white Kindle E-reader Kindle Oasis Fire 7 Fire HD 810 Dragon Touch X10 Y88X Plus X9 A1X Plus II 10.1
• Asus Zenpad 3S 10 Z500KL 3 8.0 Z581KL Z10 ZT500KL 3S 10 Z500M Z8 Z300C 10 10 Z300M Z170C 7-inch Z8s 8.0 Z380M MeMO Pad 10 ME103K Transformer Pad TF103C
• Acer Iconia Tab 10 A3-A40 A3-A30 10 Iconia One 10 B3-A10 Lenovo Tab 4 10 Plus Tab 4 8 Plus Tab3 8 Plus TAB A10-70 Tab 2 A10-70 Tab 2 A7 7-Inch Moto Tab Yuntab V101H 10.1-inch
• Google ChromeBook Pixel Book
• Nintendo Switch Tablet Sony Z4 10.1 iRULU eXpro X1a 9-inch Walknbook 2 en 1 Tablet 10.1 HTC Google Nexus 9 NeuTab Air7 N7S Pro 7 inch
• Astro Tab A935 9 Toshiba Excite Go AT7-C8 7.0-Inch Alcatel Pixi 3 A30 Tablet 8 inch Verizon Gizmo Tab Verizon Ellipsis 8 HD

Product description

The TAB188L22 car or truck seat rail or floor tablet mount is ideal for service vehicles fleets and trucks. It can be used with all tablets 7 to 18.4 inches in screen size, including Samsung Galaxy Tab S Series, Samsung Galaxy Note, Samsung Galaxy Tab Pro, Samsung Galaxy Tab 3, Samsung Galaxy Tab A, Apple iPad, Apple iPad Pro, Apple iPad Air, Amazon Fire Series, Microsoft Surface Pro, and Microsoft Surface Go 2. This mount includes Arkon’s Slim-Grip Universal Tablet Holder and a seat rail or floor mount with 22-inch flexible aluminum gooseneck. The Slim-Grip tablet holder fits tablets 7 to 18.4 inches in screen size. The holder features a spring-loaded design that makes it easy to insert or remove the tablet by pushing down on the lower legs of the holder with one hand. Included with the holder are 10 support legs (4 short, 2 medium and 4 long versions). Choose the 4 legs that provide the best fit for your tablet to be inserted at the top and bottom of the holder. The support legs can be easily adjusted in order to keep any side buttons and ports unobstructed. For vertical viewing, adjust the 360-degree swivel and then re-tighten. This aluminum car seat rail or floor mount is ideal for those who prefer mounting their tablet somewhere other than the windshield or dash. Use a socket wrench to install the mount to the car’s seat rail. Bend the 22-inch gooseneck for exact positioning of the tablet. Optional floor brackets are included for screwing the mount directly into the floor of the vehicle. (Warning: Drilling into the vehicle’s floor may damage the vehicle. Use caution and consult a mobile install professional to avoid drilling into any sensitive vehicle components.)

• Seat rail floor mount is ideal for service vehicles fleets and trucks
• Tablet mount features a 22 inch gooseneck
• Slim Grip Holder fits tablets 7 to 18.4 inches in screen size
• U.S. Pat. No. 6,585,212
• 2 year limited warranty
• Compatible devices: Amazon Kindle Fire HD/Apple iPad 2/Apple iPad 3/Apple iPad 4/Apple iPad Air/Motorola Xoom

User questions & answers

Question:	Um, it didn’t come with the seat rail mount? How can I get that and the bolts long enough to attach it
Answer:	Uses the existing seat rail mounting bolt, just need to loosen bolt and slide mounting clip under rail and bolt. On GM vehicles the bolt head is torx, a 15mm socket will work on torx head bolt. Bracket can slightly restrict total forward travel of seat. All that being said, a great product for holding tablets in place.
Question:	will this fit an iPhone X
Answer:	Yes. It’s fits all the way up too iPad Pro
Question:	Will this fit a Galaxy Tab A with a case
Answer:	I have a generic pad and it fits. It adjust pretty wide.
Question:	Will this work with an iPad Air2 w/an otterbox case
Answer:	yes, IF it will actually attach to your car seat or you dont mind drilling holes on your car. I have a F350 superduty no such luckk had to mount it totally different. A 1 hole conduit strap screwed into the side of my console for support because the aluminum rod is sturdy but it sways like a sailor at sea.its not bad for the money also buy the extendable arm mount for the windshield, I have 2 note pro 12.2 note 3 for work and that pesky 8 ball pool. Now hope ata hep ya

Product features

Arkon Car or Truck Seat Rail or Floor Tablet Mount with 22 inch Arm for iPad Pro iPad Air 2 iPad Retail Black

The TAB188L22 car or truck seat rail or floor tablet mount can be used with tablets 7 to 18.4 inches in screen size, including Apple iPad Pro, iPad Air 2 and iPad Air, iPad 4, 3, and 2, Samsung Galaxy View, Galaxy Note 10.1, Galaxy Note Pro 12.2, Galaxy Tab A 8.0, Galaxy Tab E 8.0, Galaxy Tab 4 10.1, Galaxy Tab Pro 10.1, Galaxy Tab Pro 12.2, Galaxy Tab S 10.5, Google Pixel C, Nexus 10, and Nexus 9, and LG G Pad 10.1.

Included with the holder are 10 support legs (4 short, 2 medium and 4 long versions). Choose the 4 legs that provide the best fit for your tablet. These insert at the top and bottom of the holder and can be easily adjusted in order to keep any side buttons and ports unobstructed.

For smaller tablets, use all 4 short support legs on the holder. For larger tablets including iPad Pro, use all 4 long legs. For vertical viewing, adjust the 360-degree swivel and then re-tighten. The aluminum car seat rail or floor mount is ideal for those who prefer mounting their tablet somewhere other than the windshield or dash.

• STRONG STURDY SEAT BOLT MOUNT: This phone and tablet holder car and truck mount features lightweight durable aluminum posts that ensure a stable mount.
• 360° ROTATABLE MOUNT: With this swivel attachment you are able to see your devices screen from any angle within your vehicle.
• GOOSENECK ADJUSTMENT: Along with the rotating mount, you can easily adjust the height and overall positioning of your device with the flexible gooseneck feature
• WORKS WITH CASES: No need to remove your phone case since this mount ensures snug fit on your devices with a protective case on them.
• EASY TO INSTALL: Easily attach bracket mount to your already existing seat bolt in your car for a fit that will not interfere with your cupholders or driving visibility

User questions & answers

Question:	Will this work for a IPad 8th gen ? 10.2 inches
Answer:	I did not find it to be sticky enough. It will not leave a residue if you were to use it on the dress form. But I can't say that it would stick enough not to move.
Question:	How thick can the case be
Answer:	This would work if you are planning to paint over these but to just put on the wall, no they won't work. Afterwhile the tape loses it stickiness.
Question:	How long is the arm
Answer:	Not sure, I only used a small amount.
Question:	Do I need to buy an additional wrench to adjust the seat bolt if I don’t already have one
Answer:	120volts.

Product features

Works with Smartphones & Tablets

Fits most devices between (3.5" - 8")

Strong & Sturdy Seat Rail Mount

Aluminum base and metal brackets help minimize vibrations Fits most devices.

Easy to Install

Mounting brackets allows for multiple mounting angles.

More Products from Macally

The Macally MCUPPRO is an adjustable car cup holder mount for tablet and iPhone. The soft cushioning on the holder provides extra grip and protects your idevices.

More Products from Macally

Macally MCUPTABPRO is a fully adjustable car cup mount with a heavy duty base that allows you to use your iPad or tablet for navigation and to entertain passengers.

More Products from Macally

The Macally MCUPTAB has a fully adjustable gooseneck and is a car cup holder mount that allows you to use your iPad or tablet for navigation and to entertain passengers.

More Products from Macally

The Macally HRMOUNTPRO is a dual position car headrest mount designed to hold any 7”-10” tablet wide. It is perfect for your children and for your sanity, especially on those long road trips

• Professional-grade - The essential Electronic Logging Device (ELD) compliance solution for any commercial truck or fleet. Perfect for law enforcement, ambulatory or public safety vehicle
• Road Tested - The Heavy-Duty Cup Holder Universal Tablet Mount is built with a carbon fiber arm to minimize shaking on even the bumpiest roads
• Universal Tablet Holder - Car tablet cradle has adjustable clamps to support new iPad 7 (10.2), iPad 9.7, iPad Air, iPad Mini, Galaxy Tab, Kindle Fire, Surface Go and other tablets with 7 - 11 inch screens
• Expandable Cup Holder Base - Fits easily into any standard car or truck cup holder and adjusts up to 3.5 inches in diameter
• Safe Lock Arm - Tightening knobs secure the swivel ball mount head for the most comfortable display angle that won't drop during your drive

User questions & answers

Question:	Will a surface pro x fit this holder
Answer:	yes
Question:	I have a lightweight laptop. I'd be using it as a desk while stationary. Would it work for that application
Answer:	It should I used it for a extra large iPad with outer box case and it held it well it was my gps The only thing was my cup holder in my truck was very large so I put something inside cup holder so that it would tighten in the cup holder but it worked very well no movement
Question:	will this hold the Ipad Pro
Answer:	This product was very flimsy. The weight of the Ipad could be a problem. I used my phone on it, and had problems. It did not last and is not worth the money.
Question:	can i put a 15" monitor on it? or
Answer:	You can. Only, that you could hold it only in two sides. I use my computer that way. It won’t be fixed. You can use a rubber band or any other methis to hold it in place.

Product features

Mount-It! Car Cup Holder Tablet Mount

This universal tablet car cupholder mount allows you or your passenger to safely display or interact with a tablet while driving. The heavy-duty carbon fiber arm securely holds your iPad or tablet while your car, truck, or van is on a road. Easy locking knobs at each joint ensures a strong and stable grip so your tablet won't drift, sway, or sag even on the bumpiest drives. This vehicle mount is easily installed and removed from a car's front seat or center console - no special tools necessary.

Expandable Base

The base easily expands to fit most vehicle cup holder sizes 2.75" to 3.5" for a secure, custom fit that absorbs vibrations.

Full Motion

Multiple pivot points provide a full 360° range of motion for comfortable interaction.

Height Adjustable

The long arm offers 11.5 inches of height adjustment range to accommodate a variety of uses.

Portrait or Landscape

Full rotation lets you set up the screen in vertical or horizontal orientation to fit any situation.

Adjustable Tray

Adjustable aluminum arms can expand to fit any 7-11" tablet with a secure grip.

Carbon Fiber Construction

Heavy duty 3k carbon fiber tubing makes this mount sturdy, lightweight, and easy to move.

Product description

Compatible with Most Popular Tablet Models Including:

Dragon Touch X10, Touch Y88X Plus, Touch X9, Touch A1X Plus II 10.1

Asus Zenpad 3S 10 Z500KL, Zenpad 3 8.0 Z581KL, Zenpad Z10 ZT500KL, Zenpad 3S 10 Z500M, Zenpad Z8, Zenpad Z300C 10, Zenpad 10 Z300M, MeMO Pad 10 ME103K, Zenpad 8.0 Z380M, Transformer Pad TF103C, ZENPAD Z170C 7-inch

Acer Iconia Tab 10 A3-A40, A3-A30 10, Iconia One 10 B3-A10

Samsung Galaxy Tab S3 9.7, Galaxy Tab A 10.1 / 9.7 / 8-Inch / 7.0, Galaxy Tab E 9.6, Galaxy Tab 4 10.1 / 7.0 /8.0, Tab S2 9.7 /8.0, Galaxy Note 10.1 Edition 2014, Galaxy Tab 3 Lite Kids Edition

Lenovo Tab 4 10 Plus, Tab 4 8 Plus, Tab3 8 Plus, TAB A10-70, Tab 2 A10-70, Tab 2 A7 7-Inch

Apple New iPad Pro 10.5, iPad 9.7-inch 2017 Edition, iPad Air 2, iPad Air, iPad 4 /3 / 2 / 1 9.7, iPad Mini 4 / 3 /2 / 1

Yuntab V101H 10.1-inch

Nintendo Switch Tablet

Sony Xperia Z4 10.1

iRULU eXpro X1a 9-inch, Walknbook 2 en 1 Tablett 10.1

HTC Google Nexus 9

NeuTab Air7, N7S Pro 7 inch

Astro Tab A935 9

Toshiba Excite Go AT7-C8 7.0-Inch

Alcatel Pixi3



Compatible with Most Popular Smartphone Models Including:

Apple iPhone X, 8, 8 Plus, 7, 7 Plus, SE, 6S, 6S Plus, 6 4.7, 6 Plus, 5s,5c, 5

Samsung Galaxy S8+, S8, S7, S6, S5, A5, A3, A7, J5, J3, J7 Prime, Note 8 5

Motorola Moto E4 Plus, Moto Z2 Play, Moto C Plus, Moto G Plus 5th Generation, G Play 4th gen

BLU R1 HD, Advance 5.0, VIVO XL2 5.5

Huawei Honor 9, 5X, P10, P8 Lite, Mate 9

Sony Xperia XZ Premium, XA1, E5, Z5, M5

ASUS ZenFone 3 Zoom 5.5, Zenfone Go ZB552KL, Zenfone 3 ZE520KL

LG G6, V20, K10, K8, K4, Nexus 5X

OnePlus 5 3T

HTC U11, One X10, U Play, 10 Evo, Desire 650, One A9s, 10, One S9



This is a universal mount, for devices not listed please check the device dimensions against the minimum and maximum width supported.

• 【 UNIVERSAL COMPATIBILITY:】iPad or tablet with screen size ranging from 7" to 10.2" [4 inch / 96mm) up to 7.5 inch (195mm) wide] or Smartphone 2 to 3.7 inch with width such as iPhone X / 8 / 8 Plus, iPhone 7 / 7 Plus, iPhone 6 / 6 Plus, iPhone 5 / 5s, iPad Pro 9.7 / Pro 10.5 2017, iPad Air 2, iPad Mini 2, Samsung Galaxy S9, S8, S7 Edge, Galaxy Tab A 10.1, Tab S3 9.7 inch, ASUS ZenPad 3S 10, LG, HTC, Motorola, Nokia, Sony, Smartphone, Dell, HP, Asus, Acer, Lenovo, Nintendo Switch Tablet Phablet
• 【 OPTIMAL MOUNTING SOLUTION:】 Easily and safely access your smartphone or tablet such as 2017 New Amazon Kindle Fire 7 / Fire HD 8, 2016 Fire HD 7 / HDX 7, Kindle Fire HD 10 Tablet 10.1" 7th Generation while operating a vehicle. Secure mount to most vehicle drinks beverage cup holder.
• 【 EASY INSTALLATION: 】 Expandable base fits most automobiles, recreational vehicles, Car, SUV, trucks and other vehicles with standard size round cup holders. Tool-less and simple installation/removal in seconds.
• 【 ADJUST & ROTATE:】 360 degree swivel ball joint enables ideal and proper viewing angle.
• 【 SAFE & SECURE: 】 Designed to keep device steady and secure during car rides. Solid construction for minimize road vibration and a 10 inch swing arm for stabilized viewing. Perfect for Uber, Lyft, Truck, Car Pool or long distance navigation drivers.

User questions & answers

Question:	Will this fit an iPhone 6 Plus
Answer:	I recommend Macally Car Headrest Mount, Worked perfect for me. it is useful for long trips. Keeps kids watching movies
Question:	Does this hold the Samsung 10.1 tablet with or without a cover
Answer:	yes.
Question:	Is this a legal driving option
Answer:	Do not use this for a Nintendo Switch or a smaller smartphone like iPhone s or regular I even tried with plus. The problem is the holders are not spring loaded like it says and my kids Nintendo and my iPhone 8 Plus slid right out the side. For a Nintendo I suggest one of the models that holds it on the sides not top and bottom. I’m posting a video of what it does also.
Question:	Can we mount on the windsheild
Answer:	Do not use this for a Nintendo Switch or a smaller smartphone like iPhone s or regular I even tried with plus. The problem is the holders are not spring loaded like it says and my kids Nintendo and my iPhone 8 Plus slid right out the side. For a Nintendo I suggest one of the models that holds it on the sides not top and bottom. I’m posting a video of what it does also.

Product features

IKHD22 Cupholder Mount Kit

Enjoy the convenience of having a smartphone or tablet accessible from your vehicle cup holder with this simple, yet ingenious, universal mounting solution.

Designed to fit in most vehicle cup holders with tool-free installation, the base easily twists to adjusts for a secure custom fit. To add to the security, the mount swing arm provides stability and shock absorption, while allowing for an adjustable full range of motion with multiple viewing angle.

Tablet Holder

Fits tablets & iPad ranging from 7 to 10.2 inches. Lock and release button on the back of the holder for one top and spring loaded bottom support for quick insertion and removal of your tablet. Simply press the release button and extend the top arm, insert your tablet as you push down bottom clamp arm.Push the top arm to lock. Larger tablets 8-10.2 inch (such as the iPad Air) only fit inserted by the device width. They can be positioned 360 degrees using the holder adjustment.

Smartphone Holder

- Fits smartphones ranging from 2 to 3.7 inches in width.

- Easy to use spring clamp design offers a secure & stable grip.

- Soft padded foam protects your phone and absorbs shock.

360 Degree Holder Rotation & Swing Arm

Once your holder is installed to the mounting base, you can switch between vertical (portrait) or horizontal (landscape) viewing position.

Simply turn the installed holder to your preferred orientation. The base will click as it locks into a new angle.

Adjustable Base

- Mount base twists to extend and adjust to round vehicle cup holders ranging from 2.7-inch (67-millimeter) to 3.75-inch (83-millimeter) for a secure and stable fit.

Product description

The Macally MCUPTABPRO is a fully adjustable car cup mount that allows you to use your iPad or tablet for navigation and to entertain passengers. The holder fits any Apple or Android tablets as well as iPhones or Android smartphones that are between (3.5 inches) and (8 inches) wide (with or without a protective case). The soft cushioning on the holder provides a secure grip and protects your smart device from scratches. The extra-long & upgraded 12-inch adjustable neck and 360-degree rotatable holder, bring your tablet within easy reach and offer the best viewing angle.



IT’S PERSONAL:

Bzz! Bzz! Bzz! You are driving home from work, your partner is calling you; however, merging into a bottlenecked freeway with fatigued and frustrated drivers who barely provide space for your car, you anxiously attempt to jam your hand down the side of the seat and reach for your cellphone. Why do we do this? Why not just buy a cost effective, trustworthy phone cradle to make such an annoying problem go away? I mean with prime members, you can have Macally products in just a day or two and lessen the likelihood of a car accident and extra unneeded stress. We encourage you to join the Macally cause to simplify your life and control your cluttered electronics, not the other way around.



IMPORTANT FEATURES:

* Release Button: For easy removal for your electronic device

* Cup Holder Compatibility: Expandable base fits pocket width of 2.5" to 4"

* Mobile Device Compatibility: Width must be between (3.5 inches) and (8 inches) (with or without the case)

* Works with tablet or phone cases

* Rotatable 360 degree swivel holder

* Fully adjustable and extendable 12 inch arm



VERY IMPORTANT (See state regulations/laws for windshield mounting)

When using this product, please read all safety and operating instructions and observe all warnings provided in the manual supplied in the packaging. If you have any questions or concerns, please feel free to contact the Macally customer service department for ANY questions (the contact information is also supplied within the package).



WORRY-FREE WARRANTY:

At Macally, we believe in our products. That's why we back them all with a one-year warranty and provide friendly, easy-to-reach support for any of your questions.

• 🚘 MUST HAVE DRIVING COMPANION: Our tablet holder for car combines convenience, practicality, and most importantly safety. You will be able keep your eyes on the road while enjoying both easy access and an unobstructed view of your phone or tablet.
• 👁 ACHIEVE THE OPTIMUM VIEWING ANGLE: Adjustability is plentiful with the car tablet holder. With a 12” flexible gooseneck and a 360° rotating base you will be able to set your device to any viewing angle you desire, regardless of where you are seated.
• 💪 SECURE AND STURDY BASE: Designed to offer a stable viewing experience, our iPad car holder securely mounts to any cup holder between 2.5” - 4” which can be found in most vehicles. Perfect for backseat entertainment if there are cup holders in the rear.
• 📱 UNIVERSAL MULTI-DEVICE COMPATIBILITY: Our car cup phone holder supports a wide range of devices between 3.5” and 8” wide! That means you can enjoy a hands-free experience for almost every smartphone or tablet.
• 📦 WHAT IS INCLUDED: Your satisfaction is our top priority. Along with an easy to use tablet mount that will make your drive more pleasurable, you will also receive our hassle-free return policy and LIFETIME SUPPORT.

User questions & answers

Question:	Will it fit garmin drivesmart 61lmt-s
Answer:	It is adjustable to fit any device 3 1/2 to 8 inches wide, so measure the width of your device to be sure.
Question:	what is the difference between the 2 versions of this item
Answer:	This version the neck is flexible where in the other version the neck is fixed and shorter. In doing the job desired it depends on your requirements.
Question:	does this fit well with I phone in a otter case
Answer:	Yes. I have a s8+ and it fits in the clamp both directions. It does open up very wide and the base is sturdy. This has been one of my favorite car phone holders.
Question:	Anyone tried this with car seat cup holders
Answer:	whats a car seat cup holder? like a childs car seat?

Product features

Diverse Usage For Any Occasion

Whether your children are watching videos via the back seat console or maybe you are sitting at home reading the news in your recliner (with a cupholder), this tablet mount will be your favorite sidekick to accompany your digital lifestyle.

Strong Cup Holder Insert (No Tools Needed)

Easy tightening & loosening mechanism allows you to easily twist and adjust to any cup holder size that is 2.5" to 4" in diameter. And once the base support is properly installed it not come loose.

Strong Cup Holder Insert (No TDiverse Usage For Any Occasion)

- Fits any device within 3.5 to 8 inches (wide). - 2 vertical lengtheners (arms). - 2 horizontal feet adjusters. - Quick Release Button. - Maneuvers 360° for the perfect viewpoint.

Product description

This ChargerCity Custom Tablet Floor mount features a 20-Inch flexible gooseneck aluminum mounting pedestal that can easily attach to your car's seat bolt. Floor mounting is also feasible, though it's more of a permanent type solution. This Tablet holder is compatible with all tablet 7" to 12" (Microsoft Surface Pro Apple iPad Pro 12.9 10.5 9.7 Air 1 2 3 4 Mini (Retina) Plus Acer Iconia Asus MemoPad VivaTab Lenovo ideaPad ThinkPad LG Google Nexus 7 8 10 Vizio 8 Samsung Galaxy Tab 7 7.7 8 10 12.1 Pro Microsoft Surface PRO Slate Tablets)

• Brand New in ChargerCity OEM NO FUZZ NO MESS PACKAGING
• ChargerCity Exclusive Adjustable Holder for All 7-12 screen size inch Tablets (Compatitible with iPad Pro 12.9 10.5 9.7 , iPad Air, Ipad Mini Galaxy Tab S, Surface Pro /Book)
• 360° Swivel ball provides ultimate flexibility in viewing tablet
• Preferred installation is to car's seat bolt or use its hard drill base to drill into hard wood table/Bench
• Best Heavy Duty Solution for UBER, Lyft, Trucking, Limo and Fleet Service

User questions & answers

Question:	Would this hold a macbook pro (12" x 8.4", 3lb)? if so, would it be stable enough for a passenger to use and type
Answer:	Once I got a second one it works great!! It’s perfect for cars trucks and suv for traveling
Question:	Will this hold a surface go
Answer:	Yes, it will
Question:	Would it fit iPad Pro 10.5 with case cover
Answer:	I’m using it for an IPad Air 1st generation Works great.
Question:	Will it hold the 12.9ich iPad Pro landscaped
Answer:	Thank you for your inquiry, our holder will fit iPad Pro, please slide in the 4 longer hooks first then expand the strong spring loaded holder to slide in your tablet in landscape position first. Once locked in to holder, you can then rotate adjust the tablet into portrait position. (Please check the following images, we have insert the even larger Surface Book tablet into our holder) http://ecx.images-amazon.com/images/I/71UiKDWvH8L._SL1200_.jpg http://ecx.images-amazon.com/images/I/71NkvWEzXUL._SL1200_.jpg Best Regards, Customer Support

Product description

The TAB-CM117 long arm extension windshield suction car mount is ideal for use with all large tablets 7 to 18.4 inches in screen size, including Samsung Galaxy Tab S Series, Samsung Galaxy Note, Samsung Galaxy Tab Pro, Samsung Galaxy Tab 3, Samsung Galaxy Tab A, Apple iPad, Apple iPad Pro, Apple iPad Air, Amazon Fire Series, Microsoft Surface Pro, and Microsoft Surface Go 2. This mount includes Arkon’s Slim-Grip Ultra Universal Tablet Holder and a Windshield Suction Pedestal with Telescoping Arm. This mount is ideal for cars and especially trucks, vans, or delivery vehicles with deep dashboards. The sturdy telescopic arm of the pedestal extends from 14.5 inches to 18.5 inches, keeping the tablet within easy reach. The suction pedestal installs easily to the windshield. Simply hold the base against the mounting area and push down on the one-touch lever. The Slim-Grip tablet holder fits tablets 7 to 18.4 inches in screen size. The holder features a spring-loaded design that makes it easy to insert or remove the tablet by pushing down on the lower legs of the holder with one hand. Included with the holder are 10 support legs (4 short, 2 medium and 4 long versions). Choose the 4 legs that provide the best fit for your tablet to be inserted at the top and bottom of the holder. The support legs can be easily adjusted in order to keep any side buttons and ports unobstructed. For most large tablets, the best mount holder configuration is to attach 2 short support legs on top and the 2 long support legs on the bottom of the holder. For smaller tablets, use all 4 short support legs on the holder. For larger tablets including iPad Pro, use all 4 long legs. For vertical viewing, adjust the 360-degree swivel and then re-tighten.

• TAB-CM117 windshield mount fits tablets 7 to 18.4 inches in screen size
• Ideal for cars, trucks, vans, or delivery vehicles with deep dashboards
• Sturdy adjustable arm extends 14.5 inches to 18.5 inches
• U.S. Pat. No. 6,585,212
• 2 year limited warranty

User questions & answers

Question:	Can it be attached to a disk so that it can be mounted to the dash instead of the glass
Answer:	Yes, it can
Question:	Will this work with an iPad Pro
Answer:	It works with my iPad Pro 12.9 also
Question:	Will this be big enough for the samsung galaxy note pro 12.2 inch tablet
Answer:	I’m using it on my iPad Pro 12.9 Inch and it works Great!!
Question:	If I mount my Galaxy Tab 10.1 in this holder, will the camera have a clear view of the road (for use as a dash cam
Answer:	It depends on how your vehicle's dash is configured. The mount arm must rest on the dash for support. If the dash is low, or angled downward, it may not work. I cannot use my iPad as a dash cam with this mount. But on the flipside it is a great mount at a great price.

Product features

Arkon Large Tablet Long Arm Windshield Suction Mount

The TAB-CM117 long arm extension windshield suction car mount is ideal for use with all large tablets 7 to 18.4 inches in screen size, including Apple iPad Pro, iPad Air 2 and iPad Air, iPad 4, 3, and 2, Samsung Galaxy View, Galaxy Note 10.1, Galaxy Note Pro 12.2, Galaxy Tab A 8.0, Galaxy Tab E 8.0, Galaxy Tab 4 10.1, Galaxy Tab Pro 10.1, Galaxy Tab Pro 12.2, Galaxy Tab S 10.5, Google Pixel C, Nexus 10, and Nexus 9, and LG G Pad 10.1. This mount includes Arkon’s Slim-Grip Ultra Universal Tablet Holder and a Rigid Long Extension Windshield Suction Pedestal with Telescoping Arm. This mount is ideal for cars and especially trucks, vans, or delivery vehicles with deep dashboards. The sturdy telescopic arm of the pedestal extends from 14.5 inches to 18.5 inches, keeping the tablet within easy reach. The suction pedestal installs easily to the windshield. Simply hold the base against the mounting area and push down on the one-touch lever.

Features

• Fits large tablets 7" to 18.4" in screen size, even with cases
• Support legs are customizable and adjustable
• Ideal for cars, trucks, vans, or delivery vehicles with deep dashboards

Product description

The TAB801 car or truck seat rail tablet mount can be used with all large tablets 7 to 18.4 inches in screen size, including Samsung Galaxy Tab S Series, Samsung Galaxy Note, Samsung Galaxy Tab Pro, Samsung Galaxy Tab 3, Samsung Galaxy Tab A, Apple iPad, Apple iPad Pro, Apple iPad Air, Amazon Fire Series, Microsoft Surface Pro, and Microsoft Surface Go 2. This mount includes Arkon’s Slim-Grip Universal Tablet Holder and Heavy-Duty Aluminum Seat Rail Mounting Pedestal with 22-inch Adjustable Arm. The Slim-Grip tablet holder fits tablets 7 to 18.4 inches in screen size. The holder features a spring-loaded design that makes it easy to insert or remove the tablet by pushing down on the lower legs of the holder with one hand. Included with the holder are 10 support legs (4 short, 2 medium and 4 long versions). Choose the 4 legs that provide the best fit for your tablet to be inserted at the top and bottom of the holder. The support legs can be easily adjusted in order to keep any side buttons and ports unobstructed. For most large tablets, the best mount holder configuration is to attach 2 short support legs on top and the 2 long support legs on the bottom of the holder. For smaller tablets, use all 4 short support legs on the holder. For larger tablets including iPad Pro, use all 4 long legs. For vertical viewing, adjust the 360-degree swivel. The aluminum car seat rail mount features three adjustment points and is ideal for those who prefer mounting their tablet somewhere other than the windshield or dash. Use a socket wrench to install the mount to the car’s seat rail. Bend the 22-inch adjustable arm for exact positioning of the tablet.

• TAB801 seat rail mount recommended for truck fleets and service vehicles
• Holds tablets 7 to 18.4 inches in screen size
• Tablet support legs are customizable and adjustable
• U.S. Pat. No. 6,585,212
• 2 year limited warranty

User questions & answers

Question:	I bought this stand on August 29, 2013. It worked very well, but it has already broken where the little ball that attaches and holds the piece on there, is there a warranty or a place to order replacement parts
Answer:	These holders are designed for the 'Classic' raclette dishes, unfortunately the 4-person raclette dishes do not work with these holders. Our best suggestion is to use a heat-resistant coaster for resting the dishes.
Question:	I own a 2015 Ford fusion and the seat has a casing around the bolt, is there another way to connect this to the seat
Answer:	yes they are
Question:	How do I install in a 2015 gmc sierra that does not have a front bolt for seat? Thanks
Answer:	Nonstick metal and wood accents
Question:	Does the tablet mount swivel, as in can you only turn the tablet to face the driver? Also is there enough clearance for then pasanger when in use
Answer:	4”x4”

Product features

PRODUCT FEATURES

• Slim-Grip Tablet Holder fits tablets with 7" to 18.4" in screen size, even with cases
• Support legs are customizable and adjustable
• Recommended for fleets and service vehicles and trucks

PRODUCT DETAILS

This mount includes Arkon’s Slim-Grip Universal Tablet Holder and Heavy-Duty Aluminum Seat Rail Mounting Pedestal with 22” Adjustable Arm. The Slim-Grip tablet holder fits tablets 7 to 18.4 inches in screen size. The holder features a spring-loaded design that makes it easy to insert or remove the tablet by pushing down on the lower legs of the holder with one hand. Included with the holder are 10 support legs (4 short, 2 medium and 4 long versions). Choose the 4 legs that provide the best fit for your tablet. These insert at the top and bottom of the holder and can be easily adjusted in order to keep any side buttons and ports unobstructed. For most large tablets, the best mount holder configuration is to attach 2 short support legs on top and the 2 long support legs on the bottom of the holder.

Product description

The Macally MCUPPRO is an adjustable car cup holder mount for tablets like the iPad or smartphones (e.g. iPhone or Samsung Galaxy etc.) (with or without a protective case). For effective fitting, your device should be between 3.5 inches and 8 inches in width. The soft cushioning on the holder provides extra grip and protects your smart or cellular device from scratching. The Macally MCUPPRO has a 10-inch neck with a 360-degree rotatable holder for the best viewing angle. The adjustable base of the Macally MCUPPRO fits perfectly in the cup holder of most cars.

• ENHANCED DRIVING EXPERIENCE: Our tablet holder for car is a must have roadside companion! It offers a comfortable hands free viewing experience that will allow you to focus more on the road and less time fumbling with your tablet or phone.
• MULTI-DEVICE COMPATIBILITY: Regardless of device you choose to take with you on your drive, you are covered. It doubles as both a car tablet holder and a car phone holder so you can easily mount any device between 3.5” - 8” with or without case.
• YOUR PREFERRED ADJUSTABILITY: Set your phone or tablet to your desired viewing angle to where it's easily reachable and perfectly in view. The ipad holder for car has a long tilt-able neck, 360° rotatable base, and 360° rotatable mount.
• STABLE AND SECURE: The tablet car mount easily fits a wide range of cup holders. It will securely mount onto cup holders between 2.5” - 4” which can be found in most cars, suvs, trucks, boats, and even sofas or massage chairs.
• WHAT IS INCLUDED: We strive for excellence with our products and our customer service. The ipad holder for car will come with a 1 year warranty, easy to reach LIFETIME SUPPORT, and if for any reason you are not satisfied, hassle-free returns.

User questions & answers

Question:	Will this hold a tom tom gps
Answer:	It holds my iPad and iPhone easily
Question:	Can I move the top arm so it angles down, instead of up, to shorten the overall height of the mount
Answer:	Possibly. The arm that holds the device is attached to the vertical support at the top but moves/swings between the two uprights. The arm holding the device(tablet or phone) is attached at the top of the two vertical supports and moves between these two vertical supports. This arm can be moved from side to side and the clamping device for the tablet or phone is attached to this arm. Which the clamping device can then be rotated for the device(Tablet or phone) to be placed in a vertical or horizontal(Landscape) mode. This arm can then be moved in a motion that angles your device (phone or tablet) into the proper viewing angle which could change the overall height of your mount. So, the minimum height of the mount (the two vertical supports cannot be changed but you can make your device taller or the same height as the two vertical supports by moving the arm that holds the clamping attachment, thus moving the tablet or phone above the vertical support.
Question:	What does the warranty cover
Answer:	Hi Vicki, Our warranty covers all parts for 1 year from the date of purchase.
Question:	Does it hold iPad with case
Answer:	My iPad is in a case and the car mount device works well

Product features

Collapsible Neck

- Adjust the angling.

- Maximize the height to 10".

- Flip down to lower just above the cup holder.

Fits Inside Most Cup Holders

- No tools needed.

- Easy tightening & loosening mechanism.

- Twist to adjust to almost any cup holder size.

The Universal Cradle

- Fits any device within 3.5 to 7 inches (wide).

- 2 vertical lengtheners (arms).

- 2 horizontal feet adjusters.