14 best phone holders for cars

Product description

Kindly Note:

1. Not recommended to install the car phone mount on too rough or curved dashboard surfaces.

2. Peel the protective film from the suction cup bottom before use.

3. The preferable installation area for the stabilizer base should be close to the phone holder for maximum stability.

4. Let it sit for 24H after installation.

• FREE INSTALLATION & UNOBSTRUCTED SIGHT: Mpow focuses on the innovative and smarter mounting solution and blazes past other traditional dashboard car mounts. Up to 15cm/5.9in aluminum long gooseneck sends the dashboard Phone mount much closer to you without blocking your sight, giving you the freedom to position it on multiple locations on the dashboard or windshield. Most importantly, it can be bent to avoid obstructing display and irregular vents
• STRONG SUCTION CUP WITH STICKY GEL: super strong vacuum suction cup features a layer of sticky gel and a locking lever which can maximize the stability and keep the mount in place. Comes with an anti-shake stabilizer, it safely hold the device without vibrating and wobbling even on rough roads. The suction cup is reusable and washable, Simply rinse in water and let air dry to restore the stickiness.
• HOLDS PHONE AND CASE COMBINATIONS: the adjustable side clamps extend from 1.8in to 3.7in, compatible with most smartphones with screens up to 6.5” and even worn its case. (Galaxy S10/S9/S8/S7/S6/J5/J3/A5/A6/A7, Huawei P20/Mate10/Mate20/honor 8X, iPhone 11 Pro/ 11 Pro Max/ X/XS/XR/8Plus/8/7Plus/7/6Plus/6S/6, Sony Xperia Xz3/Xperia Xz2/Xperia Xz2 compact, Xiaomi Redmi Note 6 Pro/Redmi Note 5 Pro/Redmi Note 5/mi 8 Pro/mi 8/Mi8 Lite/mi A2/MI A2 Lite/mi A1, LG G5/G6/V30/V20 und MP3 )
• VIEW YOUR PHONE AT ANY ANGLE: The flexible and durable gooseneck can be bent to the shape you like, allowing for flexible adjustment for easy positioning and access to device controls. Thanks to the 360 degrees ball-head, the dashboard mount can be flexibly tuned to display at an optimal viewing angle, either in landscape or portrait mode for convenient navigating, calling, and music in the vehicle
• BUILT TO LAST AND PROTECT: the polished surface makes the mount look sleek in your car. The heat-resistant PC and ABS materials make Mpow dashboard Phone holder sturdier than other Pure ABS mounts. The foldable holding feet allow hassle-free charging on the go. The Sponge-Padded surface and grips of the cradle prevent slipping and scratches. Note: Please avoid the car mount if you use a pop grip. It cannot hold phones with your Pop Mount/Pop out stand/expanding stands

Product features

MPOW Universal Dashboard Car Phone Mount

The quick-release button allows you to release and install your phone with one hand motion in seconds.

The side arms expand up to 94mm/3.7in wide, fits most phones such as:

Reusable & Washable Sticky Gel

The car mount’s suction cup has a coating of sticky gel that prevents air gaps from forming. To renew the gel adhesive, just rinse with water and let air dry

Assemble the Car Mount

• Step 1. Unscrew the knob;
• Step 2. Pass the knob through the ball head;
• Step 3. Tightly push the ball head into the socket of the cradle, then tighten the knob.

Package Contents

• 1 x Car Phone Holder
• 1 x Suction Cup Base
• 1 x Anti-shake Stabilizer
• 1 x Manual
• 2 x Spare Sticky Adhesives for Stabilizer

• Upgraded Vent Clip: Features a stronger, larger vent clip and an innovative support frame to provide extra support, it can hold your phone securely on an air vent in your car
• Upgraded Phone Cradle: Design with a larger cradle to keep your phone stable in place. With the instant release button, you can push the phone cradle arms in to secure your phone and press the button to release
• Ideal Viewing Angle: A 360° rotating and pivoting ball joint allows you to adjust and quickly switch between portrait and landscape view
• Adaptable Attachment: Features a 3-levels locking knob to easily and firmly fix the air vent mounting grip on your car air vent
• Package Contents: AUKEY HD-C58 Car Phone Mount, User Manual

User questions & answers

Question:	Will it hold my Galaxy S
Answer:	It can be used on any phone smaller than 6.5 inches, so it can definitely be used on your Galaxy S8
Question:	How many magnetic plates come with the product
Answer:	There are two magnetic plates.
Question:	will this work with a small phone like the original iPhone SE, or new iPhone 12 mini
Answer:	It worked . ihave iphone 12
Question:	Can I remove placement and place somewhere else
Answer:	Yes, you can remove the holder to wherever you want to set. The viscose of the pedestal could be reused after you wash it by warm water.

Product features

AUKEY Car Phone Mount

• Upgraded Stronger Air Vent Hook Clip, flexible fit to attach to thicker or thinner air vents.
• Firmly holds your smartphone or GPS.
• 360-degree rotation for the ideal viewing angle.
• One-button phone release.
• High-quality materials and finish.

The phone cradle release button has been relocated to the top at the back for easier access and smoother phone retrieval. The phone cradle has also been improved to hold your phone firmly even on the most bumpy roads.

Complete Adjustment

Easily adjust to the perfect viewing angle using the 360° rotating and pivoting ball joint.

Upgraded Stronger Air Vent Hook Clip

The grip can be set to fit different types of air vent, including those with narrow or wide gaps between the slats.

Adjustable Phone Rest

Extends to fit bigger phones. Four positions to choose from.

Keep Your Case On

Fits regular phone cases too.

Open Charging Port

Easy access to your phone's charging port for fuss-free charging on the road.

Upgraded Mount

With a larger cradle and stronger grip, it can hold your phone firmly in place even for a big one.

Step 1

Flip the grip release knob to the widest air vent mounting grip gap. Clip the mount on your car’s air vent and then flip the grip release knob to to lock.

Step 2

Press the phone cradle release button and adjust the phone rest so that your phone is positioned at the right height in the mount.

Step 3 Press the BACK EDGE

Press the BACK EDGE of the cradle arm tips to push the phone cradle arms back in, so they grip your phone securely.

• 3 in 1 Universal Car Mount: VICSEED car cell phone holder made with airliner PTFE material, can be universally mounted to your dashboard, windshield or vent to meet your demand at your convenience and requirements. Good choice to most of the cars, pickup trucks, SUV, trucks, taxis; good assistant for Uber, Lyft drivers.
• Perfect Protection: Say goodbye to the easy-scratched plastic panel car mount. VICSEED Upgrade 3 in 1 mobile phone holder for car adds a high-density silicone material with excellent resilience. The car phone holder is covered in a thick layer of silicone that will ensure your mobile device is safe from wear and tear. The unprecedented design makes leaves zero scratches on mobile devices.
• Secure Stable Install: The VICSEED car cell phone mount features an extra strong suction cup with super sticky gel pad. It easily sticks securely on the dashboard or most flat surfaces. Remove the car vent phone mount easily by pulling the suction pad without leaving any nasty marks. (Note: use warm water to wash the car holder's suction cup if the surfaces are dirty or it can not stick well, then let it air dry.)
• Long Arm Design & Multiple Viewing Angle: The car mount for iPhone 11 has a telescopic arm that extends from 4.84" - 9.05" and can pivot up or down for a variety of angles which optimizes viewing capabilities. This car holder for cell phone has a highly flexible ball-joint 360° rotation that provides infinite viewing angles. Position your phone at the perfect angle to enjoy a more relaxed and safer drive.
• One-Hand Operation: The car mobile phone holder also features a One-button release system that enables you to lock or release your phone with just one hand operation.Fit well for all mobile phones between 4''-7''in width and most thick case.

Product features

Reusable Suction Cup Car Phone Holder Mount

• We off the extra dashboard pad, provides smooth surface. So the car holder can stay more firmly and securely.
• Use warm water to wash the car holder's suction cup if the surfaces are dirty or it can not stick well, then let it air dry.After that, and the car mount will work like new one.

Compatible Devices

iPhone 11 / 11 Pro / 11 Pro Max / XS / XR / XS Max / X / 8 / 8 Plus / 7 / 7 Plus / SE / 6s / 6 Plus / 6 / SE / 5s / 5 / 4s / 4

Samsung Galaxy S20 / S20+ / S20 Ultra 5G / Note10 / Note10+ / S10 / S10+ / S10E / S9 / S9+ / S8 / S8+ / Note 8 S7 / S7 Edge / S6 S6 Edge / S5 / S4 /A70s / A20s / M30s / M10s / A90 5G / A30s / A50s

LG V50S ThinQ 5G / G8X ThinQ / Q70 / K30(2019) / K20(2019) / K40S / K50S / W30 Pro / W30 / W10 / Stylo 5 / V50 ThinQ 5G / G8S ThinQ / G8 ThinQ / Q60 / K50 / K40 / Q9 / V40 ThinQ

Google Pixel 4 XL / 4 / 3a XL / 3a / 3 XL / 3 / 2 / 2 XL / XL / Pixel

Nexus OnePlus 3 / 2 / X; Blackberry Q10 / Z10; Sony; Nokia; XiaoM; Huawei and all phones.

What's in Box

• 1xSuction cup base
• 1xCar Air Vent Clip
• 1x Car Phone Holder
• 1xUser Guide

• GIVE YOUR DASHBOARD THE LUXURIOUS LOOK YOU SEEK - Bestrix SmartClamp Car Mount will give your dashboard the luxurious look you seek, an easy 360° rotation of your phone display and an arm you can adjust for your convenience, guaranteed not to block the driver’s viewer your phone charging ports.
• EXCLUSIVE SMARTCLAMP FEATURE, UNIVERSAL COMPATIBILITY- This phone car holder comes with our exclusive SmartClamp phone cradle- an innovative design that enables you to effortlessly put phones in and out of the mount. Compatible with all phone screens, Adjust once for a snug fit & use seamlessly with just one hand- with no awkward buttons to push, no clunky metal plates on your phone or untrustworthy magnet car phone holder mounts.
• UPGRADED SUCTION CUP - Upgraded super strong stickiness suction cup with the extra dashboard pad fits all dashboards with smooth surfaces, leather/faux dashboards. It is very easy to install with the unique suction cup (Less than a minute!), just make sure to remove all air from underneath before locking the lever.
• THICK CASE & BIG PHONES FRIENDLY - Bestrix SmartClamp phone holder for car is compatible with ANY smartphone with almost any Thick Case on the market - iPhone 12/ 12 mini/ 12 pro/ 12 pro max/ SE/ 11/ 11 Pro/ 11 Pro Max/ XS/ XR/ XS Max/ X/ 8/ 8 Plus/ 7/ 7 Plus/ SE/ 6s/ 6 Plus/ 6/ 5s/ 5/ 4s Samsung Galaxy Note20/ S20/ S20+/ S20 Ultra 5G/ Note10/ Note10+/ S10/ S10+/ S10e/ S9/ S9+/ S8/ S8+/ Note8/ S7/ S7 Edge/ S6/ S6 Edge, Sony, LG, Google, Sony, Nokia and all cellphones, GPS device
• FULLY BACKED BY OUR 1-YEAR WARRANTY- Enjoy a completely risk-free purchase as each SmartClamp car phone mount is backed by our ironclad 1 Year Warranty. Order yours today & enhance your daily driving comfort with our reliable smartphone car holder!

User questions & answers

Question:	What are the approximate measurements of the suction cup
Answer:	is it the same size as the iphone 6 plus
Question:	Will this fit lg stylo 6 size
Answer:	I have a pretty thick rubber case on my phone and it fits with that. It's a little snug, but not harmful. So I wouldn't see why not.

Product features

SmartClamp - Single-Hand Use

Place in or take off your phone with ease on the padded docking site in one motion, thanks to the SmartClamp design.

Intuitive Design

Smart silicone edges that bend & enable your phone to securely snap in, with no extra buttons or locking mechanisms.

Extra Secure Fit

The silicone edges along with the anti-slip padding hold your phone firmly in place, and keep it extra-secure during bumpy rides.

Simple & Easy

To take your phone off the cradle, lightly pull it and the silicone pads will release your device.

10 X Stronger gel

Extra dashboard pad

rinse to restore

Product description

Quick release button: press button on back of unit to slide open and then take out mobile phone. Press the arms on both side to clamp mobile phone again, simple of operation, save time and power.360 degree rotation: The fully 360-degree rotation provide you with the best viewing angle.The holder ensures safe driving whether you are talking, navigating, listening to music or charging oad compatibility: passed a wide range of tests, fit for most cellphones, iPhone 7 7 Plus iPhone 6S Plus, 6S, 5S, 5C, Samsung Galaxy S6, HTC, LG, Nexus, Nokia, GPS Device. Sturdy, cradle-less and attractive device holding system.Suitable for width size from 1.9 inch to 3.7inch smart phone or electronic devices.1 year warranty. Not compatible with the pixel 5 Smartphone. Car mount, car mounts, cell phone holder, cell phone holders, car phone mount, car phone mounts, car holder, car holders, cell phone Car Mount, cell phone Car mounts, phone mount for CAR, phone mount for cars, phone mount, phone mounts, phone holder for car, phone Holder for cars, car phone Holder, car phone holders, phone Car Mount, phone Car mounts, car mount for phone, Car Mount for phones, cell phone mount, cell phone mounts, mount

• Quick Release Button: Press button on back of unit to slide open and then take out mobile phone. Press the arms on both side to clamp mobile phone again, simple of operation, save time and power.
• 360 Degree Rotation: The fully 360-degree rotation provide you with the best viewing angle.The holder ensures safe driving whether you are talking, navigating, listening to music or charging.
• Broad Compatibility: Passed a wide range of tests, fit for most cellphones, iPhone 7 7 Plus iPhone 6s Plus, 6s, 5s, 5c ,Samsung Galaxy S6, HTC,LG, Nexus, Nokia, GPS Device. Sturdy, cradle-less and attractive device holding system.suitable for width size from 1.9 inch to 3.7inch smart phone or electronic devices.
• Single-handed Operation: Simple installation and removal of smart phones. Simplistic Installation, Single-handed Operation, No Tools Needed.
• This car phone mount holder is compatible with most all cell phone devices

User questions & answers

Question:	the air vent directional controls on my 2010 Scion xB are thicker than most, anyone have experience with this fitting/not fitting
Answer:	I have a 2009 Saab 9-3 with air vents that form a grid pattern, this does not fit within the space of the grids, so I cannot use it.
Question:	Are those reviews really real ? seems so fake
Answer:	I dk what reviews are fake or real, but I do know this product works very well! There is a convenient release button on the back that springs open the sides and allows an easy removal of the phone, which (when squeezed) has a ratchet system to hug the phone when you are ready to use it again. The clamp that holds it to the vent is fully adjustable and the switch is easy to operate which locks it in place. I think you will be very pleased.
Question:	I have an otter box on my iphone 6s plus. Will the mount still fit
Answer:	I have an iPhone 8 plus with a Spigen Herringbone case and Ring holder on the back and have been using this holder for a year now with no issues. Yes, the phone does not fit perfectly in to the holder and does stick out but there is still enough grip from the sides and with it tilted up to my view point in my car, Mazda CX5, the phone has never fallen out. At least not yet. I have tried a LOT of holders and this has been the best one I have found to date. I am buying 2 right now for my parents. My dad was driving my car while I was out of the country last month and the holder mysteriously disappeared when I went to get the car back. :)
Question:	Will it hold a Galaxy S
Answer:	It can hold S8 but not Note8 or Note9 (Note series are too heavy). Even with S8, overtime it will just get loose.. We had to put in a plastic piece to make it clam stronger on the air vent. Personally I think the design can be improved

Product features

Universal Design to Accommodate Most Any Cell Phone

Designed to hold any phone size between 1.9 inches to 3.7 inches wide. Simply press the button on the back to open the sides of the mount to fit your size phone. Close the sides to secure your phone in the mount.

Clips to your air vent and keeps your windshield clear of any obstructed view.

Superior in Quality

Made to withstand any condition, hot or cold. Designed to secure your phone on smooth roads and bumpy roads. Made with high quality materials to withstand everyday use.

Soft padded interior to protect your phone while in the mount. Tough Plastic exterior to withstand rough conditions.

Ease of Use Design

360 Degree Rotation, a one-click release button, and adjustable side grips to accommodate your size device from 1.9 to 3.7 inches wide.

Quick Release Button

Press the button on the back of the mount to quickly release your phone from the mount and to expand the sides for use with larger phones

Eye Level Safe Viewing

Keep your windshield clear of obstructions with this mount. Create a safe, eye level viewing of your device while mounted.

Use for Horizontal or Vertical Vents

This mount performs best on horizontal and vertical vents only. It is not advised to use this product on circular vents.

Installation Instrustions

1. Hold the car mount with your hands and unscrew the lock washer on the back. (Do not throw away this washer) Place circular ball on lever through lock washer.

2. Insert the ball into the slot in the back of the mount.

3. Tighten the lock washer back onto the mount.

4. The unit is now assembled.

5. Use the bi-directional lever to clamp the mount to your air vent. One way will be tighter than the other.

6. Adjust your mount to the desired position and you are ready to go!

7. Simply open the sides with the button on the back of the mount and place your cell phone or device in the mount and close the sides to secure it. Then use the quick release button on the back to remove your device.

• Best Viewing:The base is able to rotate through 360 degrees, and the adjustable arm and ball joint makes it easy to find the ideal phone viewing angle
• Reliable Adhesion: Fixes securely to a flat surface on your dashboard. Features an additional sticker base for slightly curved or uneven surfaces
• Magnetic Attachment: Four powerful magnets securely hold your phone or GPS on your car dashboard. Just grab and go when you reach your destination. Note that wireless charging will not work when a magnetic plate is attached to your device or placed inside its case
• Easy Setup: Included circular metal plate (for smaller phones) and rectangular metal plate (for larger phones) easily slip between your phone and case or can be safely adhered to the back of your phone
• Package Contents: AUKEY HD-C49 Car Magnetic Phone Mount, Sticker Base, Circular Metal Plate, Rectangular Metal Plate, User Manual

User questions & answers

Question:	Can you put the magnet in the case or adhere it to the case if you have credit cards in the case? As in using one of those phone case wallets
Answer:	It is recommended to adhere it to the case.
Question:	Can I attach the magnet to back of my phone case
Answer:	Attach directly to back of phone. The magnet will hold.
Question:	I found two metal plates for my phone in the package. One is round and smaller while another is rectangular and bigger. What's the difference of them
Answer:	If your phone is larger than 6 inches, you may want to use the rectangular one since it will provide more magnetic power..
Question:	It is possible to reposition the sticky base many times
Answer:	Not too many times. Yes you can remove it, wash it, and place it somewhere else but it is not as sticky. I don't recommend repositioning as mine lost the thick sticky piece due to moving and now the product is useless.

Product features

Stable & Flexible Mounting

Adhesive base with suction lock fixes securely to your dashboard. Release the lock to rotate the mount 360 degrees on the base.

Adjustable Arm

90-degree-adjustable arm keeps your phone accessible without blocking your view.

Comfortable Viewing

360-degree ball joint motion makes it easy to find the ideal phone viewing angle.

Installation

Stick the magnetic plate to the back of your phone (or place it inside your case under the phone) and attach your phone to the arm of the mount.

Noted: Wireless charging will not work when a magnetic plate is attached to your device or placed inside its case.

Step 1

Peel off the white backing on the bottom of the adhesive base and stick it to your dashboard.

Step 2

Lift up the lever on the phone mount and place it on top of the adhesive base.

Step 3

Press down the lever. The mount should now firmly grip the adhesive base.

Product description

Vansky 3-in-1 Car Phone Mount - 3 ways for your choose, whatever you want! Multi functional, Rotatable, Convenient, Steady3-in-1 Smart design Vansky car mount not only has the 3-in-1 usage in dashboard, windshield or air vent, but it is also equipped with 3 holders in one package: one holder one mount. Users can use three of them without any disassembly at the same time and can service multiple devices and vehicles for your needs. Features: Multifunctional, Convenient, Steady, Safety Over current and over voltage protection Full 360-degree adjustable rotation for optimal viewing angle Adjustable holder to view your device at any angle or orientation while driving Easy install- Easy one press button releases the device with just a push of a finger Compatible with most smartphones, GPS, pad, MP3/MP4 players, etc Package Included: 1 x Vansky Universal Bracket1 x Windshield Mount1 x Dashboard Mount1 x Air Vent Holder1 x User Manual: At Vansky, we stand strongly behind the craftsmanship of our products. That's why we them with 45 Days Money Back & One Year Hassle Free and provide Friendly, Easy-to-reach Support.

• ☑️ [3-In-1 Car Mount Solution] - Vansky car phone mount can be wall-mounted or clipped to your car's air vent / dashboard mount / windshield phone mount for convenience.
• ☑️ [Easy & Quick Installation] - No tools required. Easy one press button to releases the clamps on your phone with just a push of a finger.
• ☑️ [360 Rotation] - The 360 degree rotatable phone holder for car lets you find the perfect angle to view your smartphone at a quick glance.
• ☑️ [Strong Suction Cup] - Features strong suction cup that will hold your device steady so you can keep your focus on the road and your hands on the steering wheel.
• ☑️ [Compatibility] - The car mount can securely attach your smartphone between 3.5 inches and 7 inches. Extendable grip accommodates phone between 6.7-9.7cm width, not limited for iPhone 12 11 Pro X XR 7 6 6s Plus, Samsung series, LG series and others 3.5-7 inches smartphone and with soft padding, securely holds your device.

User questions & answers

Question:	Can a charging cable be used while phone is in the mount
Answer:	Yes, the two adjustable bars that hold the bottom of the phone are wide apart.
Question:	Will it accommodate the iPhone X
Answer:	I have the IPhone 8 Plus and only the main larger car mount piece that has the bendable arm and attaches to your windshield fits my phone (with & without cases on). The other 2 car mount attachments are to weak to hold it so it always will either tilt down or my phone just will fall off altogether. Not to mention the smaller wind shield attachment (the one without the bendable arm) my iPhone 8 Plus can’t even be used with it because the phone is too tall so it hits the windshield & dashboard causing it to just hang down so you can’t see your screen. I’ve attached pix in my review if you want to check it out.
Question:	The bottom supports dont seem to come out on mine? anyone else? am i missing somethihg?thanks
Answer:	It took me a second but they fold from the middle out. The hinge is on the out part and the hook is tucked into the middle. Once you figure that out it's easy.
Question:	How long is the flexible gooseneck, starting from the center of the base with it bent at 90 degrees? Thanks
Answer:	It's about 9". I left it in my RV so I don't have it here to measure. You can bend it 180 degrees if you wanted to. Very flexible.

Product features

Vansky 3-in-1 Car Phone Mount - 3 Ways for Your Choose, Whatever You Want

Our Vansky 3-in-1 Design phone holder for car offers you 3-way mounting, it can be wall-mounted or clipped to your car's air vent / dashboard mount / windshield phone mount for your needs. Vansky phone holder for car is multi functional, rotatable, convenient and steady. 360 Rotation fully adjustable with 360-degree rotation for quick portrait and landscape views, you can always find the perfect angle to view your smartphone at a quick glance.

Main Feature

Flexible gooseneck and 360 degree rotating holder allow you to position your phone or GPS horizontally, vertically, or tilt in any direction, provide the optimal viewing angle, view your device at any angle or orientation while driving.

Hands Free

Comes with easy-to-assemble parts that no tools required. Strong suction cups secure firmly to your vehicle. To adjust the position of the car mount, simply lift the lever at the base of the mount and adjust the position before reattaching and then press down to lock it.

Compatible With Most Phones

With its soft padding, it securely holds your device between 67mm and 97mm, including but not limited for GPS, iPhone 7plus 7 6s 6s+ 6 6+ 5 4, iPod, Samsung Galaxy S7,S6, edge Note 5 4 ,LG G5 G4 Nexus 6P 5X,HTC One, Smartphone and GPS devices.

Super-Strong Suction Cup

Thanks to its super-strong suction cup, the car mount is able to adhere to smooth surface & attach itself firmly to some textured surface. You can keep your focus on the road and your hands on the steering wheel. Besides, it is easy to clean, rinse with water then air dry.

3-In-1 Smart Design

The car phone mount can be wall-mounted or clipped to your car's air vent / dashboard mount / windshield phone mount as for your convenience.

• 【Philosophy of Chief Designer】It's my star work among 100+ car holder designs, which recovers originally simple. Simplicity is a philosophy & joy & life attitude. Wish the simple product & service can please you. Expecting your opinions to grow my baby
• 【Patented Multi-scene Design: Car/Desk/Kitchen/Bathroom/Gym】VANMASS car phone holder brings sticky suction cup & steel-cored vent clip from 3000+ surveys. Ideal present for your specials. Luxury look & structure was certified by RoHS, CP65, REACH
• 【Original 4 Technologies- Thanks to Millions of Users' Voice】1) Extreme -40~194℉ Weather resistance from precious KING of plastic 2) Super suction power up to 44LBS 3)Extra pad for smooth surface 4)Steel-cored 3-Level Clip: 20X stable & durable
• 【Millions of Users Preferred 0.96” Width Bottom Tray - Easy to Touch HOME button & Unlock screen & Plug charge cable】Upgraded from flimsy drop-down bottom tray, the solider & wider bottom tray can support any weight phone on the bumpy road
• 【Luxury Present: Top-notch Configuration & Profound Package】Exquisite car phone mount (suction cup/vent clip/pad) is fully protected in Elegant & Eco-friendly box. V-shaped pattern on the package means Vibrant & Victory to you and your special one

Product features

Luxury Configuration with Decent Package

• 1x Phone Cradle
• 1x Exclusive Suction Cup Mount
• 1x Alternative Steel Cored 3-level Clip
• 1x Adhesive Dashboard Pad
• 1x User Manual
• 1x Thank You Card

NO Melt, NO Break - Patented Design & Advanced Material

Boasts 5 years of experience in car holder, we finally find the best materials & structure for durable use even in extreme condition (Bear 10,000 times vibration).

Sturdy yet Gentle - Fully Soft Silicone Protects Phone

Soft full silicone rubber interior would protect your expensive phone from scratches & bumps. Grip your phone like hands, tight but no hurts.

Stainless Steel Structure - Last Forever

Different from the easy-to-wearing iron screw, this mount uses the stainless steel screw to be incredibly solid & steady, tested under extreme 10Hz super high vibration frequency for 26,000 hours.

Leading Super Adhesive with Strong Suction Lock

Reinforced sticky suction pad is 5 TIMES stable & flexible than others. Apply to most of cars, pickup trucks, SUV, trucks, taxis; good assistant for Uber, Lyft drivers. Also can be a useful desk phone holder.

Best Gift Idea

VANMASS car mount will help your lover take advantage of all phone’ s handy features without taking the hands off the wheel to ensure his/her safety.

• Widely Compatibility : The dashboard cell phone holder is suitable for most kinds of cell phones or GPS devices which are between 6-12mm thick. Including iPhone 11/11 Pro/11 Pro Max/ XR/ XS/ XS Max/ X/8/8 Plus/7/7 Plus/ 6s /6s plus/6/6 plus/5Se/5s/5/4s, Samsung Galaxy Note 8 /9/10 /10 pro/20 ultra, S20/S 8 /9 /10, S 20 plus/ 8 plus / 9 plus /10 plus, S 7 Edge, Nexus, Pixel, LG, Sony, HTC, IPAD, Huawei, Mi, Garmin and so on
• Stable & Slip free : Dependents on its soft silicone-textured bottom and sticky pads, it can protect phone against bumping, scratching or flying out whenever there is an emergency braking, sudden stop and sharp turn
• Washable & Reusable : The bottom of the car phone holder is made from high-tech adhesives. Just rinse with water and dry it, it will be the same as the new one
• Use Tips : Peel off the sticky film on the bottom of the car phone holder and ensure your car dashboard surface being dry and clean (no dust) before laying the holder on

User questions & answers

Question:	Does heat effect the secure hold & does it leave any residue when removed
Answer:	Just got it few days ago but were out all day yesterday in heat of sun and it stayed secure. I had wondered about residue too and just went out and checked and it it does not! I am sold now! I put it in center of dash which I like better then off to side or the ones that fit in your cup holder so you would be looking down.
Question:	Could someone please provide the dimensions of the base pad area? (Length and width
Answer:	The length is 5.1 in,and the width is 5 in.The holder can support the phone firmly.
Question:	Can it be used with the phone vertical
Answer:	I am afraid that it can not be used with the phone vertical. It can be used with the phone horizontal conveniently.
Question:	Will this fit a phone in an otterbox
Answer:	It fit my phone in an Otterbox. It stands up straighter with the Otterbox case on, but it stays put.

Product features

Loncaster Cell Phone Holder for Car, To make your drive easier

Note

Compatible devices：

1. The dashboard car phone holder is suitable for all cell phone devices with 6mm-12mm thickness. Including compatible for: iPhone 11/11 Pro/11 Pro Max/ XR/ XS/ XS Max/ X/8/8 Plus, Samsung Galaxy Note 8 /9/10 /Note 20 Ultra , S20/S9 /S10, S20 Plus / Nexus, Pixel, LG, Sony, HTC, IPAD, Huawei, Mi and other more devices.

2. It needs a smooth flat area(5 x 5.1 inches) on your dashboard for installation. Besides, it won't work well if your devices covered a thick case, especially the otterbox, life-proof and pop socket.

3.Applies to the most majority of dashboards, except some curved surfaces like 2016 Subaru Impreza, 2016 Nissan Frontier, mini cooper, 2016 Audi Q7, Honda Civic, 2009 Honda Accord, 2010 Honda CRV, 2008 Toyota Yaris, Toyota Rav 4 2018, Toyota Corolla, BMW i3, 2013 Audi A7, Scion XD, 2011 Tacoma, 2006 Jeep Wrangler, Jeep Cherokee, 2016 Nissan Sentra, 2018 golf GTI, 2019 Prius, Ford Fiesta 2016, Hyundai Genesis Coupe, Mercedes Benz CLA 250, 06 Acura MDX, etc.

One-hand Operation

Easy to mount, release and operate the phone with one hand. No distraction while driving.

No Harm To Your Device

Designed without magnets, full silicone material avoid your phone be scratched. A gel pad is easy to clean. no leave residue on the dashboard.

Stable & Non-Slip

Premium Silicone-Made, Non-Slip Technology holds your phone tightly to keep driver and cell phone safe.

Multi-purpose Phone Stand

Frequently Asked Questions :

Q: Will it fit with a pop socket attached to the back of the iPhone?

A : No. There is a solid panel behind the phone when it is placed in the holder.

Q : Can I use it with a fuzzy dash cover? Is the back part weighted at all?

A : No, the back is not weighted and it would not work with a fuzzy dash cover.

Q:Can this be placed on a curved or carpeted dashboard navigation mat?

A : No, this appliance has a peel layer and under is adhesive on bottom of unit.

Q: Can I take it back and forth from the car to the house?

A: Yes, it doesn't permanently stick to anythin. You can take the holder with washable rubber back and forth from the car to the house. It can be used repeatedly.

Q :Will it be better than a magntic holder or suction holder to the window or dashboard？

A: Yes, absolutely better than magnetic. It won't budge and hold the phone in a horizontal position securely.

• Secure Stable Install: The VICSEED phone car holder with the latest improved vent clip [ Won't break & Drop off ]. The car phone mount attaches easily and securely to most of air vent. After take few seconds to install it well, if you hit a bump or a sharper turn the phone holder will stay in a place. It ensures a safe, distraction-free car environment
• Perfect Protection: Say goodbye to the easy-scratched plastic panel phone mount. VICSEED cell phone holder for car adds a upgrade high-density silicone material with excellent resilience. The car mount for phone is covered in a thick layer of silicone that will ensure your mobile device is safe from wear and tear. The unprecedented design makes leaves zero scratches on mobile devices
• Easy to Adjust & Multiple Viewing Angle: This cell phone car mount has a highly flexible ball-joint 360° rotation that provides infinite viewing angles. The samsung galaxy note 2 car mount allows quick switching between vertically and landscape view .Position your phone at the perfect angle to enjoy a more relaxed and safer drive
• Secure Grip & One-button release: This cell phone car mount vent owns the thick arms built-in anti-slip rubber pads, which makes the car mount for iphone 6 can secure grip your mobile phone. No need worry your phone will fall off from the car mount for iphone 7. It ensures a safe, distraction-free car environment. The samsung galaxy s7 car mount also features a One-button release system that enables you only take 0.1S to lock or release your phone with one hand operation
• Friendly Design: VICSEED upgrade iphone car holder owns adjustable foot, the function not ony has avoid some cell phone power or volume button will be squeezed by the clamp arm but also make the iphone holder can fit well for big phones.Fit well for all mobile phones between 4''-7''in width and most thick case

User questions & answers

Question:	can hold on Samsung note
Answer:	Yes, the car phone holder can hold on Samsung galaxy note7 Welcome to buy VICSEED
Question:	Will this work for Samsung A
Answer:	Yes, this Phone car holder can work for your mobile phone welcome to buy Best Regards VICSEED Direct
Question:	can you charge your phone while using the mount
Answer:	yes you can. The iphone car holder with a slot at the bottom where you can run a cord to your phone and plug it into your charger.
Question:	Will this fit for my iPhone Xs
Answer:	Yes, the car phone holder mount can fit iPhone XS.

Product features

VICSEED 2020 Upgrade Air Vent Clip Non-scratch Silicone car cell phone holder

Easily secure the Car Mount to your air vent with the upgraded clip, providing strong stability that wouldn't rock back-and-forth.

The phone car mount covered in a thick layer of silicone that will protect your expensive phone from scratch.

Why Choose VICSEED Car Vent Phone Mount?

• Say goodbye to bulky phone holder for car windscreen which just aren't>
• No more being distracted by your phone sliding off your dashboard.
• No more oversized car mount blocking your windshield.
• No more car suction phone holder which don't work when it's too hot or cold.

Easily to Use VICSEED Car Cell Phone Mount Clip

1:Unscrew the clip by rotaing.

2:Install the iphone holder for car into your car air vent, then close the clip by rotaing to make it fix to the air vent.

VICSEED iPhone Car Mount Main Features

• Works with all smartphones 4~7 inch mobile phones, including Apple iPhone, Samsung Galaxy, HTC, LG, Google, Motorola, Xiaomi, etc
• Easy to install and use, the android car mount can install in a few seconds
• Enough deep arms can support THICK Phone case (Thickness of the phone case’s back should be less than 0.5in.)
• Adjustable bottom for larger phones
• Release button can let you put and get phone easily
• Multi-angle & adjustable, 360 degree ball-joint rotation

Support charging while driving

There is reserve charging port, so you can charge your phone easily. Always keep your phone full of battery power. It also won't block the aux jack. You can connect your phone with your car sound equipment freely.

Work well all year round

Constructed of durable, sturdy airliner PTFE material and rubber, this will hold your device securely in place even in extremely harsh environments.

Support big phones

The bottom tray is adjustable. If your phone is large size, you can pull the foot down. So our air vent car mount universal phone can hold your big phone better fit.

Compatible Devices

• iPhone 12 / 12 Pro / 12 Pro Max / 12 Mini / 11 / 11 Pro / 11 Pro Max / XS / XR / XS Max / X / 8 / 8 Plus / 7 / 7 Plus / SE / 6s / 6 Plus / 6 / SE / 5s / 5 / 4s / 4
• Samsung Galaxy S20 / S20+ / S20 Ultra 5G / Note10 / Note10+ / S10 / S10+ / S10E / S9 / S9+ / S8 / S8+ / Note 8 / S7 / S7 Edge / S6 / S6 Edge / S5 / S4 /A70s / A20s / M30s / M10s / A90 5G / A30s / A50s
• LG V50S ThinQ 5G / G8X ThinQ / Q70 / K30(2019) / K20(2019) / K40S / K50S / W30 Pro / W30 / W10 / Stylo 5 / V50 ThinQ 5G / G8S ThinQ / G8 ThinQ / Q60 / K50 / K40 / Q9 / V40 ThinQ
• Google Pixel 4 XL / 4 / 3a XL / 3a / 3 XL / 3 / 2 / 2 XL / XL / Pixel
• Oneplus 7 Pro/ 6T/ 6/ 5T/ 5/ X, Moto G7/ Z3, Nokia 7.1/ 6.1, etc
• Blackberry Q10 / Z10; Sony; Nokia; XiaoM; Huawei and all phones.
• What's in Box
• 2xCar Air Vent Clip
• 1x Car Phone Holder
• 1xUser Guide

• 【One Car Holder For Multiple Purposes】This clip car mount more convenient, can be used in car dashboard, sun visor, rearview mirror. Multiple purposes can provide you with more convenience and more use needs in the car.
• 【360°Rotation & 180°Tilt】The upgrade car phone mount not only support 360-degree rotatable switch between horizontal and vertical screens at your will, but also can be 180° tilt will provide you with the best viewing angle, , so you could see the phone screen clearly and keep secure driving rather than limited by view angle.
• 【Curved Base Design】Made with a soft, non-slip silicon pad and curved base. The phone holder can be attached to the car dashboard or curved surface and firmly hold your device to prevent them from scratching and dropping. Spring buckle base cannot be shaken off, strong and sturdy.
• 【Folding Car Bracket】When not in use the car phone stand can folds flat and easily fits in a center console, glove box, or door pocket to keep it out of the way, but make you conveniently in reach when you need it.
• 【Broad Compatibility】Designed with a spring buckle, which can be adjusted to fit mobile phones from 4 to 6.8 inches, Compatible with iPhone 12 11 pro/11 pro max/XS/XR/X/8/7,Galaxy, Moto and More other smartphone.

• 👍UPGRADED CLIP: This Car Phone Holder Mount is designed as “hook shape” and form “Three grasp points” which can vise the outlet blades tightly and ensure it never fall off in any situation. The Cell Phone Holder for Car iS BORNED FOR INNOVATION & PRACTICABILITY, it solving the market’s common problem of being easy to fall off over time.
• 👍LOCK YOUR PHONE FIRMLY: LISEN Magnetic Phone Car Mount with 6 built-in strong magnets, the maximum bearing up to weight of 4 cellphones. Powerful suction keep your cellphone stay stably even when drive on a bumpy road. PLEASE NOTE：It is recommend that use the “square pad” on the back of your phone/case. It is more stable than the round.
• 👍EASY INSTALLATION: Benefit from the special design of the clamp, this iphone car mount is quite easy to install, just need to put it on the car’s outlet blades and adjust the length of clamp by turning the knob to match the outlet. Then finish the installation.
• 👍UNIVERSAL COMPATIBILITY: Universal air vent car phone holder will firmly hold most smart phones and mini tablets compatible with iPhone 12 mini/12/12 pro/12 pro max/11/11 pro/11 pro max/XR/X/8/7/6/5, Note 9/ Galaxy S10/ S10+/ S10E/ S9/ S8 /S7 /S6 /Edge S6 /S5, iPad Air 2/Mini 3/ Pro 9.7 and more.
• 👍WHAT'S YOU GET: 1*LISEN magnetic phone car mount, 2*Round metal Pad, 1*Rectangular metal Pad, 2*Round PE Film , 1*Rectangular PE Film. NOTE: THIS PHONE HOLDER ONLY COMPATIBLE WITH HORITABLE AIR VENT AND NOT COMPATIBLE WITH VERTICAL OR ROUND AIR VENT.

Product description

A Surprise Present for Loved Ones The universal car mount is an ideal solution to safeguard the safety of all drivers, and also a thoughtful present for husband/wife, father, friends, or family. This gear will make every drive worry-free and accompany you home safely. It is your right-hand man on the commute, and an ideal companion during the journey. Sleek and Stylish Design This phone mount for car has both functions and aesthetics. Its polished mirror makes the holder look elegant and. The polished mirror surface makes the phone holder for car look elegant and seamlessly match your car Kindly Note 1. Please do not install the suction cup on curved/rough/uneven/dirty surfaces. 2. Before installation, please clean and wipe dry the mounting surface. 3. There is a protective film on the bottom of the suction cup and the small stabilizer, please tear it off before installation. 4. The preferable installation area for the stabilizer base should be close to the phone holder for maximum stability. 5. After installation, please push the lever down to lock the suction cup. 6. When removing the suction cup, please unlock the lock lever first, and then pull up the small tab. Do not pull it directly. 7. When summer is approaching or tor the temperature rises, please avoid constant direct exposure to the sun, because this may affect the function of your car mount.

• Stable without Falling: Have you ever encountered the tragedy of a phone falling while driving? Then this car phone holder is exactly what you need. It is not only equipped with a sticky suction cup, but also a stabilizer, which can prevent the phone from wiggling or falling, even over rough roads.
• Hold Smartphones up to 6.9’’: The dashboard car phone holder is made to be universal, and can work with phones with a 4.0~6.9" displays and up to 93mm/3.7in wide, even with a thick case. Compatible with iPhone Series, Galaxy Series, and more smartphones.
• Adjustable Feet & Dual Release Buttons: The feet of the car phone mount holder can be moved up and down to adapt to phones of various sizes, and avoid the phone's side key. With 2 release buttons, you can install or remove the phone with your left or right hand.
• Multiple Installation Options: This car phone mount uses a long and flexible gooseneck that can be bent down and away from your dashboard, so you can view your phone clearly without worrying about blockage to your sight of the road ahead.
• 360° Rotation: The gooseneck can be flexibly bent to get a comfortable viewing angle. Also, the mount features a ball joint that allows a 360-degree rotation, which means you can easily adjust the screen of your phone, either in landscape or portrait mode.

User questions & answers

Question:	Will this fit the iphone 12 pro max with case
Answer:	Yes, and its legs can be pulled down, so it can be compatible with larger phones, but I suggest not too thick phone cases
Question:	Is this easy to install or remove? Will it leave a mark on car
Answer:	The operation of this car phone mount is very simple, just follow the instructions, so far, no marks are left
Question:	Can this hold a Samsung s
Answer:	Yes. we have S10+. The way it is designed, it accommodates all sizes.

Product features

Compatible with Virtually All Smartphones (4.0’’-6.9’’)

•Compatible with iPhone 12 mini / 12 / 12 Pro / 12 Pro Max /SE 2020 / 11 / 11 Pro /11 Pro Max / XS / XR / X /8 Plus / 8 / 7 Plus / 7 / 6 Plus / 6 / 6s Plus / 6s / SE / 5S / 5C / 5;

•Compatible with Galaxy S20 / S20+ / S20 Ultra / S10+ / S10 / S10e / S9+ / S9 / S8 / S8+ / S7 / S7 Edge Plus / S6 / S6 Edge;

•Compatible with Galaxy Note 20 / Note 20 Ultra/ Note 20+/Note 10 / Note 10+/ Note 9 / Note 8 / Note 7 / Note 6 / Note 5 / Note 4 / Note 3

•Compatible with Galaxy A9 / A8 2018 / A7 / A6 / A5 / A4/ A3 2017

•Compatible with Galaxy J7 / J6 / J5 / J4+ / J4 / J3;

•Compatible with Pixel 4XL / 4 / 3XL / 3A XL / 3A / 3 / 2XL / 2 / XL/ Pixel, Nexus / Nexus 7 / 6 / 6P / 5 / 4

•Compatible with Moto One / e5 / e4 / e3 / e2 / g7 / g6 / g5 / g4 / z3 / z2 / z

•Compatible with LG G8 G7 ThinQ/ G6 Plus/ G6/ G5/ G3/ V50 V40 ThinQ/ V30/ Stylo 4/ Optimus,

•Compatible with OnePlus 7T Pro / 7T / 7Pro / 7 / 6T / 6 / 5T / 5 / 3T / 3 / 2 / X / One

•Compatible with HTC/Nokia/Blackberry and more smartphones

Sticky Suction Cup

The high-quality TPU suction cup is enlarged and thickened to enhance its stability and prolong its service life. Also, the suction cup has a layer of sticky gel coating to prevent the formation of air gaps, thereby improving adsorption stability.

100% Protection

The side arms and bottom feet of this car phone holder are designed with silicone pads, through which the phone can be protected from being scratched. More importantly, the tragedy of the phone falling due to bumpy road conditions will not happen.

360° Rotation

Thanks to the ball head design on the back, the car mount can be switched between portrait and landscape orientations, so you can find the most comfortable angle to view and touch the phone while driving, navigating, and answering phone calls.

Step 1. Clean

Find a flat and smooth surface on the dashboard, clean and dry the surface with the cloth.

Step 2. Tear off

Tear off the protective film on the suction cup and stabilizer, and attach them securely to the dashboard.

Step 3. Lock

Push the lever down to lock the suction cup, press and hold the stabilizer for 10s to ensure that it is firmly attached.

Remove

To remove the suction cup, simply unlock the lock lever and pull up the small tab slowly. Note: Please do not pull the mount directly.

• 100% Designed, Engineered, and Manufactured in the USA by WeatherTech!
• Designed using interchangeable base cups allowing you to customize the perfect snug fit.
• The adjustable phone holder fits virtually all known mobile phones, including those with normal sized protective cases.
• Base allows phone to rotate 360°, adjustable for viewing from any seat position.
• Open access bottom lets you easily charge your mobile device while it is in place.

User questions & answers

Question:	Will this fit a 328i series BMW sedan
Answer:	There are 4 size cups I’m assuming it will fit a BMW I have a Chevy &we have a Lincoln SUV & they fit perfectly try it U can always send it back if it doesn’t work
Question:	This product does not fit my car cup holder. Where does the description say I have to pay return shipping costs
Answer:	When initiating the return, select "item not as described" as the reason (this is described to fit all cup holders -- it does not! (mine included)). This typically generates a no-cost return label.
Question:	Will this fit for iPhone 8 Plus
Answer:	hmm I'm not sure exactly, but it fits the 5c, the 5 s, the 8 with otter case and the 11. I have had no problems with the cup sizes for these sizes.
Question:	Why are you charging $7 more than Weathertech for the same cupfone and saying free shipping to prime members while Weathertech charges less
Answer:	I looked on Weather Tech's website.....it appears that the $34.95 + $8.00 ground shipping adds up to the $42.95 that is advertised by this vendor.......ends up costing the same......you will probably end up getting it earlier than when ordering directly from Weather Tech

Product features

Safer hands free driving

CupFone is a mobile phone holder that sits conveniently in any vehicle’s cup-holder. Fully adjustable tilt and rotation allows you to easily see your favorite app like Navigation or Waze when on the road. Convenient cut-out allows for charging on the go!

Adjustable

Easily adjusts to accommodate your cell phone with a single easy-to-turn knob. Once adjusted your phone slides in and out with easy, no springs or magnets.

• Regular CupFone fits most phones and cases, up to 3.375" wide
• CupFone XL fits large phones with thick cases, up to 4.11" wide

A second easy-to-turn knob allows rotating for the perfect viewing angle.

Find Your Fit

Interchangeable base cups allowing you to find the perfect snug fit for your vehicle's cup-holders. Each base cup features a whole in the bottom which allows the included tool to separate with ease.

Just 'click' together the cups you need and store the others for use in rental cars, golf carts or any other cup holder!

On The Go

Fits virtually any cup-holder so you can take with you in your truck, utility-vehicle, lawn mower, golf cart, boat or RV. You never have to search for your mobile phone again, because you always know where it is.

• Maps & hands free navigation while driving your car, truck or SUV
• GPS and score card while golfing
• Secure your phone while working