14 best ibra iphone 6 holder for cars

• 【One Car Holder For Multiple Purposes】This clip car mount more convenient, can be used in car dashboard, sun visor, rearview mirror. Multiple purposes can provide you with more convenience and more use needs in the car.
• 【360°Rotation & 180°Tilt】The upgrade car phone mount not only support 360-degree rotatable switch between horizontal and vertical screens at your will, but also can be 180° tilt will provide you with the best viewing angle, , so you could see the phone screen clearly and keep secure driving rather than limited by view angle.
• 【Curved Base Design】Made with a soft, non-slip silicon pad and curved base. The phone holder can be attached to the car dashboard or curved surface and firmly hold your device to prevent them from scratching and dropping. Spring buckle base cannot be shaken off, strong and sturdy.
• 【Folding Car Bracket】When not in use the car phone stand can folds flat and easily fits in a center console, glove box, or door pocket to keep it out of the way, but make you conveniently in reach when you need it.
• 【Broad Compatibility】Designed with a spring buckle, which can be adjusted to fit mobile phones from 4 to 6.8 inches, Compatible with iPhone 12 11 pro/11 pro max/XS/XR/X/8/7,Galaxy, Moto and More other smartphone.

• 👍UPGRADED CLIP: This Car Phone Holder Mount is designed as “hook shape” and form “Three grasp points” which can vise the outlet blades tightly and ensure it never fall off in any situation. The Cell Phone Holder for Car iS BORNED FOR INNOVATION & PRACTICABILITY, it solving the market’s common problem of being easy to fall off over time.
• 👍LOCK YOUR PHONE FIRMLY: LISEN Magnetic Phone Car Mount with 6 built-in strong magnets, the maximum bearing up to weight of 4 cellphones. Powerful suction keep your cellphone stay stably even when drive on a bumpy road. PLEASE NOTE：It is recommend that use the “square pad” on the back of your phone/case. It is more stable than the round.
• 👍EASY INSTALLATION: Benefit from the special design of the clamp, this iphone car mount is quite easy to install, just need to put it on the car’s outlet blades and adjust the length of clamp by turning the knob to match the outlet. Then finish the installation.
• 👍UNIVERSAL COMPATIBILITY: Universal air vent car phone holder will firmly hold most smart phones and mini tablets compatible with iPhone 12 mini/12/12 pro/12 pro max/11/11 pro/11 pro max/XR/X/8/7/6/5, Note 9/ Galaxy S10/ S10+/ S10E/ S9/ S8 /S7 /S6 /Edge S6 /S5, iPad Air 2/Mini 3/ Pro 9.7 and more.
• 👍WHAT'S YOU GET: 1*LISEN magnetic phone car mount, 2*Round metal Pad, 1*Rectangular metal Pad, 2*Round PE Film , 1*Rectangular PE Film. NOTE: THIS PHONE HOLDER ONLY COMPATIBLE WITH HORITABLE AIR VENT AND NOT COMPATIBLE WITH VERTICAL OR ROUND AIR VENT.

• Ultra Sticky Suction Pad:Firm suction pad sticks tightly on the dashboard or most surfaces. Remove easily by pulling the suction pad without leaving any nasty mark on your dash.(NOTE:We DO NOT recommend to apply the dashboard car mount on leather, wall or filmed glass surfaces as the suction cup is designed with strong viscosity and attraction)
• Extendable Arm:Telescopic arm can extend from 4.6in to 6.6in and pivot up or down for optimal viewing height. Prevent from blocking your view while driving.
• 360°Rotations:Swivel ball head ensures 360° free rotations to your desired viewing angle. Quick to adjust for a safe and effortless drive. As summer approaches and days are getting hotter, please avoid direct exposure to the sun as this may affect the function of your car mount
• Flexible Arm Lock: Simply press the button to adjust arm width that ranges from 1.6-3.5in (4-8.8cm). Our car mount holder is compatible with most smart phones up to 6 inches.
• All-Around Protection:There are sponge cushions on the car phone mount for secure and wobble-free fit for your cell phone. Foldable holding feet allow hassle-free charging for your cellphone. Note: Please avoid the car mount if you use a pop grip. It cannot hold phones with your Pop Mount/Pop out stand/expanding stands.

Product features

Broad Compatibility

Works with most smartphones and cases. The arms present a firm grip to hold the latest iPhone series, Galaxy series, phones from Motorola, Sony, and any other mobile phone brands with width in a range of 1.8in/4.5cm and 3.7in/9.3cm.

Sticky Suction Cup

The suction cup has a coating of sticky gel that prevents air gaps and ensures a secure hold on the dashboard, windshield, or desktop. Note: Works on smooth and flat surfaces. Do not attach it to the windshield in hot summer.

Anti-fall Adjusting Knob

You can easily adjust the length of the arm by turning the knob, and customize the distance between your phone and you as needed. The knob has been upgraded and uses an anti-fall design, it will not fall off during the adjustment process.

Anti-skid and Anti-scratch

There are sponge pads on the arms, bottom feet and surface, which can protect your device from being scratched. Also. The cushioned car mount absorbs the vibration during bumps, and holds the phone securely in place.

Rinse and Reuse

If the sticky suction cup gets dirty or loses its stickiness, simply rinse it with water and let it air dry, it will stick like new. You can easily remove the car phone mount holder from vehicle to vehicle and re-attach it as you want.

Warm Prompt

The total thickness of the combination of phone and phone case should not exceed 13mm/0.5in. To ensure a firm grip, please remove the ultra-thick phone case, pop grip, and phone ring holder when using this car phone holder.

Product description

Quick release button: press button on back of unit to slide open and then take out mobile phone. Press the arms on both side to clamp mobile phone again, simple of operation, save time and power.360 degree rotation: The fully 360-degree rotation provide you with the best viewing angle.The holder ensures safe driving whether you are talking, navigating, listening to music or charging oad compatibility: passed a wide range of tests, fit for most cellphones, iPhone 7 7 Plus iPhone 6S Plus, 6S, 5S, 5C, Samsung Galaxy S6, HTC, LG, Nexus, Nokia, GPS Device. Sturdy, cradle-less and attractive device holding system.Suitable for width size from 1.9 inch to 3.7inch smart phone or electronic devices.1 year warranty. Not compatible with the pixel 5 Smartphone. Car mount, car mounts, cell phone holder, cell phone holders, car phone mount, car phone mounts, car holder, car holders, cell phone Car Mount, cell phone Car mounts, phone mount for CAR, phone mount for cars, phone mount, phone mounts, phone holder for car, phone Holder for cars, car phone Holder, car phone holders, phone Car Mount, phone Car mounts, car mount for phone, Car Mount for phones, cell phone mount, cell phone mounts, mount

• Quick Release Button: Press button on back of unit to slide open and then take out mobile phone. Press the arms on both side to clamp mobile phone again, simple of operation, save time and power.
• 360 Degree Rotation: The fully 360-degree rotation provide you with the best viewing angle.The holder ensures safe driving whether you are talking, navigating, listening to music or charging.
• Broad Compatibility: Passed a wide range of tests, fit for most cellphones, iPhone 7 7 Plus iPhone 6s Plus, 6s, 5s, 5c ,Samsung Galaxy S6, HTC,LG, Nexus, Nokia, GPS Device. Sturdy, cradle-less and attractive device holding system.suitable for width size from 1.9 inch to 3.7inch smart phone or electronic devices.
• Single-handed Operation: Simple installation and removal of smart phones. Simplistic Installation, Single-handed Operation, No Tools Needed.
• This car phone mount holder is compatible with most all cell phone devices

User questions & answers

Question:	the air vent directional controls on my 2010 Scion xB are thicker than most, anyone have experience with this fitting/not fitting
Answer:	I have a 2009 Saab 9-3 with air vents that form a grid pattern, this does not fit within the space of the grids, so I cannot use it.
Question:	Are those reviews really real ? seems so fake
Answer:	I dk what reviews are fake or real, but I do know this product works very well! There is a convenient release button on the back that springs open the sides and allows an easy removal of the phone, which (when squeezed) has a ratchet system to hug the phone when you are ready to use it again. The clamp that holds it to the vent is fully adjustable and the switch is easy to operate which locks it in place. I think you will be very pleased.
Question:	I have an otter box on my iphone 6s plus. Will the mount still fit
Answer:	I have an iPhone 8 plus with a Spigen Herringbone case and Ring holder on the back and have been using this holder for a year now with no issues. Yes, the phone does not fit perfectly in to the holder and does stick out but there is still enough grip from the sides and with it tilted up to my view point in my car, Mazda CX5, the phone has never fallen out. At least not yet. I have tried a LOT of holders and this has been the best one I have found to date. I am buying 2 right now for my parents. My dad was driving my car while I was out of the country last month and the holder mysteriously disappeared when I went to get the car back. :)
Question:	Will it hold a Galaxy S
Answer:	It can hold S8 but not Note8 or Note9 (Note series are too heavy). Even with S8, overtime it will just get loose.. We had to put in a plastic piece to make it clam stronger on the air vent. Personally I think the design can be improved

Product features

Universal Design to Accommodate Most Any Cell Phone

Designed to hold any phone size between 1.9 inches to 3.7 inches wide. Simply press the button on the back to open the sides of the mount to fit your size phone. Close the sides to secure your phone in the mount.

Clips to your air vent and keeps your windshield clear of any obstructed view.

Superior in Quality

Made to withstand any condition, hot or cold. Designed to secure your phone on smooth roads and bumpy roads. Made with high quality materials to withstand everyday use.

Soft padded interior to protect your phone while in the mount. Tough Plastic exterior to withstand rough conditions.

Ease of Use Design

360 Degree Rotation, a one-click release button, and adjustable side grips to accommodate your size device from 1.9 to 3.7 inches wide.

Quick Release Button

Press the button on the back of the mount to quickly release your phone from the mount and to expand the sides for use with larger phones

Eye Level Safe Viewing

Keep your windshield clear of obstructions with this mount. Create a safe, eye level viewing of your device while mounted.

Use for Horizontal or Vertical Vents

This mount performs best on horizontal and vertical vents only. It is not advised to use this product on circular vents.

Installation Instrustions

1. Hold the car mount with your hands and unscrew the lock washer on the back. (Do not throw away this washer) Place circular ball on lever through lock washer.

2. Insert the ball into the slot in the back of the mount.

3. Tighten the lock washer back onto the mount.

4. The unit is now assembled.

5. Use the bi-directional lever to clamp the mount to your air vent. One way will be tighter than the other.

6. Adjust your mount to the desired position and you are ready to go!

7. Simply open the sides with the button on the back of the mount and place your cell phone or device in the mount and close the sides to secure it. Then use the quick release button on the back to remove your device.

• 👍UPGRADED CLIP: This Magnetic Car Phone Holder Mount is designed as “closed loop hook shape” and form “Three grasp points” which can vise the outlet blades tightly and ensure it never fall off in any situation. The Cell Phone Holder for Car iS BORNED FOR INNOVATION & PRACTICABILITY, it solving the market’s common problem of being easy to fall off over time.
• 👍LOCK FIRMLY HORIZONTAL & VERTICAL VENT: The LISEN magnetic phone car mount was designed with lengthened "Hook(1.41in)" which helps to lock more deeper vent blade and perfect resolved incompatible issue of VERTICAL VENT. The"Hook" adopt upgraded PC+ABS material ensure 3X sturdiness and resolve the broken issue of clip. The bottom cover with soft shockproof rubber, which could attach more tightly without scratch of vent.
• 👍LOCK YOUR PHONE FIRMLY: The magnetic car mount built-in ultra stronger magnets that hold up to 7.7lb(19 x iPhone 11) can hold phone firmly for safe driving. The magnets are 44% bigger (12mm vs 10mm in diameter), 33% thicker (4mm vs 3mm) and 91% stronger than other magnetic phone car mount on the market. It have been tested on bumpy road, Sharp turn and other tough driving condition and it always keep phone safe. NOTE: Incompatible with iPhone 12 series MAGSAFE, Please insert metal plate.
• 👍UNIVERSAL COMPATIBILITY: Universal Magnetic phone car mount holder will firmly hold most All phones like iPhone 12 mini/ 12 pro max/ 11/11 pro/11 pro max/XR/X/8/7/6, Samsung Note 9/ Galaxy S10+/ S10E/ S9/ S8 /S7 /S6 /Edge S6 and more. In addition, it is almost the best choice for VERTICAL&HORIZONTAL type of air vent as the unique design of air vent clip, the clip of LISEN magnetic car phone holder and vent blade become integral when mounted and won't slip off like other.
• 👍WHAT'S YOU GET: 1*LISEN magnetic cell phone holder for car, 2*Round metal Pad, 1*Rectangular metal Pad, 2*Round PE Film , 1*Rectangular PE Film. PLEASE NOTE: 1. Not recommended for phones with an Otterbox case. 2. It is recommended to use the “square pad” on the back of the phone / case 3. The Magnetic car mount does not compatible with iPhone MAGNETSAFE(iPhone 12 series) 4. Incompatible with Dodge Ram 1500; 2012 Nissan Rogue; Chevrolet Silverado; 2019 Chevrolet Corolla;

User questions & answers

Question:	Does anyone use this in a Subaru Outback
Answer:	The phone holder is compatible with most cars, and it can be compatible with horizontal air outlets and vertical air outlets. If your car has these two air outlets, you can use it. But please be aware that it is best to use the horizontal air outlet, the vertical air outlet may be unstable.
Question:	Does the metal plate I am to attach to my phone prevent my induction charger stand from recharging my phone
Answer:	Yes, this cradle has magnetizing tabs, so it will affect the wireless charger to charge the phone.
Question:	Does this hold the iPhone 12 max pro with the case on it
Answer:	On the description of this model it states that it does fit the iphone 12 max pro as being compatible. (mine is a iphone 11 and works fine)
Question:	Does this phone holder for car support phones with phone cases
Answer:	Yes.This universal car cell phone holder will firmly hold all the smart phones (4.7-6.8in) even with thick case (0-0.12inch) like iPhone 11/11 pro/11 pro max/XR/X/8/7/6/5, Samsung Note 9/ Galaxy S10/ S10+/ S10E/ S9/ S8 /S7 /S6 /Edge S6 /S5 and more.

• Andobil Multifunctional Car Phone Mount: With the latest improved suction cup and vent clip [ stronger & tighter ], this cell phone holder can hold your phone firmly on dashboard windshield or air vent, even on the bumpiest road. Better yet, it comes with a 2-step locking system, which provides more reliable attachment to your car.
• Easy One-Touch Operation: Just a simple touch to mount or remove your phone within seconds - Super easy to use while you drive. It also features an adjustable foot, making this car mount universal for any cell phones up to 7”. Compatible with iPhone/ Samsung Galaxy/ LG/ Pixel, etc.
• Extreme Flexibility: Thanks to the 360-degree swivel head, your phone can be oriented to portrait, landscape, or any angle in between. For added convenience, it has an extendable long arm to keep your phone always in view - And ready for hands free calls, GPS navigation & music streaming.
• Better Design Than Ever: Andobil phone holder for car is made with the most superior ABS plastic and anti-scratch cushion, which ensures full protection of your beloved phone. Moreover, the sturdy arm and stable ball joint can increase its durability. You won't need to worry about your phone falling anymore.
• What You Get: Andobil car phone mount *1, improved suction cup *1, upgraded air vent clip *1, dashboard pad *1, user manual *1. They are fully protected in exquisite package. It will bring an easy and safe driving experience to you and someone you care about.

Product features

Andobil Car Phone Mount

Meet Easy Clamp 2.0 - Andobil car phone mount 2nd generation. After so many tests and redesign, we've improved it to the best version ever. Andobil team has studied all the feedback to make it ideal for your daily drive.

• When it comes to a stronger suction cup, the stickier gel and thickened pad of this holder is all you need.
• With the 1-sec quick release button, you can mount or remove the phone faster and more smoothly.
• Horizontal or vertical, closer or further. This flexible motion allows free reach to your mobile.
• Best 3-in-1 mounting solution for your car. Feel free to use it on the dash, windshield or air vent.
• Versatile for different cellphones and cars in the market. Start to add some intelligence to your drive.

The goal of this car phone holder is simple: To securely hold your phone in place, while you just keep focused on the road.

Adjustable Foot

If your phone is large size, you can pull the foot down. So our phone car mount can hold your big phone better fit.

360° Free Rotation

Full 360° rotation allows limitless possibilities, including landscape and portrait viewing.

Hassle-free Charging

Reserved space for your charging cable. Juice up your phone freely on a road trip.

Best Phone Holder for Car

Does it support all mobile phone models?

This car phone mount fits most phones from 4” to 7”. It’s compatible with iPhone 12/ 12 Pro/ 11 Pro Max/ 8 Plus/ 8/ X/ XS Max/ XS/ XR/ 7 Plus/ 7/ 6s/ SE,

Compatible Samsung Galaxy S20/ S20+/ S20 Ultra/ S10+/ S10/ S10e/ S9+/ S9/ S8+/ S8/ S7 Edge/ Note 9/ Note 8,

Compatible LG G8 G7 ThinQ/ G6+/ V50 V40 ThinQ/ V30/ Stylo 4/ Optimus,

Compatible Google Pixel 4/ 4XL/ 3/ 3XL/ 2/ 2XL/ XL, Nexus 6P/ 6/ 7/ 5X,

Compatible Oneplus 7 Pro/ 6T/ 6/ 5T/ 5/ X, Moto G7/ Z3, Nokia 7.1/ 6.1, etc.

Please Note: The thickness of the phone case’s back should be less than 0.24in.

Any tips for the adhesive dashboard pad?

1. The dash pad is for One-Time use. Once installed, it’s too sticky to remove. Please think twice about the location.

2. Before mounting the suction cup, please let the dash pad sit for 24hrs.

3. We do not recommend it for soft/ curved/ leather/ wood/ plush fabrics/ filmed glass surfaces. In such case, please install it on the windshield or air vent instead.

4. If the weather is getting too hot, please use the air vent clip instead.

We provide 1 year hassle-free service and lifetime support. You can always count on our excellent customer services.

• 【Never Fall Off-Classic Series Design】Miracase car phone mount adopts 2019 latest locking design. The clip hook will catch one of car air vent blades. The spring clip plate and the tightening nut will provide absolute fixation. It will never fall out like other products no matter how bumpy the road is.
• 【Universal Compatibility】Miracase air vent phone holder cradle is compatible with all cell phones and devices between 2.1-4.05 inches wide(such as thicker phone cases, navigation and more).For Apple iPhone 11/11 Pro/11 Pro Max/XR/XS Max/XS/X/8/8 Plus/7/7 Plus, Samsung Galaxy S10/S10 Plus/S9/S8 Edge/Note 9,LG,Google,Sony,Huawei and More
• 【One-hand Operation】With quick release button and adjustable clamp arms, Miracase car phone mount makes it very easy to insert and remove your phone with single hand. Provide you with safer driving whether you are talking, navigating, listening to music or charging.
• 【360 Degree Rotation】The 360-degree rotatable head will provide you with the best viewing angle to keep secure driving. You can place your phone in any orientation(horizontal,vertical and more), Just enjoy the best drving experience.

Product features

Miracase Car Phone Mount-Classic Series

Installation Instructions

1. Unscrew the screw nut1, place it onto the ball head.
2. Insert the ball head into the socket of clamp head until you hear a "click".
3. Tighten the screw nut1.The tighter the nut, the harder it is to rotate the clamp head.
4. Loosen the screw nut2 until it attaches to the screw nut1.
5. Make the clip hook downward and pull open the clip plate, push the hook into the air vent grille to catch a blade, then release the spring clip plate to make it fix to the air vent.
6. Make sure the product is already installed stably, then tighten the screw nut2. Installation complete!!

Note:

• Don't install the product on the blade at the top or bottom.
• Remember to never text while driving.

• Secure Attachment: Securely hold your smartphone or GPS on an air vent in your car
• Flexible Fit: Fits most standard air vents and both horizontal & vertical vent blades. Features an adjustable air vent mounting grip to attach to thicker or thinner air vents
• Simple Setup: Easily place and remove your phone using the widely adjustable phone cradle with instant release button. A 360° rotating and pivoting ball joint gives you the ideal viewing angle and allows quick switching between portrait and landscape view
• Soft Surface: The mount is padded with soft silicone to ensure smooth contact with your device and prevent scratches
• Package Contents: AUKEY HD-C58 Car Phone Mount, User Manual

User questions & answers

Question:	Will it hold google pixel 3, with room for c cord through the bottom in a honda cr-z
Answer:	will work on google pixel 5
Question:	This holder is perhaps the cheapest one i have found? Is it reliable
Answer:	Very nice product. Frequently bought together and well works with Guanda Bluetooth FM Transmitter for Car Bluetooth Adapter High-end Car Music Player.
Question:	What if I turn my heat on? Does it make my phone 100 degrees in 5 minutes like my current one
Answer:	You should not have a problem with heat slowing the phone down. I had that happen to me once and I'm a field tech. I also point the vents at the roof of my car which evenly distributes the air and diverts away from the phone. These big mounts usually prevent the phone from getting too hot too. However, I'm in TX and I can't use a windshield mount. The mount will melt right off the suction cup in a matter of several months and I'm stuck buying another one.
Question:	Hi can this fit iPhone 5? Thanks
Answer:	Those grippers on the sides spread quite wide. It holds my iPhone6 in a Mophie battery case just fine. It is the first holder I've found that fits my iPhone6 inside of a Mophie battery case, and holds it snugly while driving. iPhone5 is about the same size as a 6, as I recall. I'm going to guess 99% chance you'll be happy with it.

Product features

Fits Wide Range of Air Vents

The grip can be set to fit different types of air vent, including those with narrow or wide gaps between the slats.

Open Charging Port

Easy access to your phone's charging port for fuss-free charging on the road.

Padded Support

Curved silicone padding provides additional support for your device.

Complete Adjustment

Easily adjust to the perfect viewing angle using the 360° rotating and pivoting ball joint. pivoting ball joint to get a clear & comfortable view.

Instant Release Button

Simply tap the touch-sensitive button to release your phone on arrival.

Keep Your Case On

No need to remove your phone case (up to 5mm thick).

Product description

Vansky 3-in-1 Car Phone Mount - 3 ways for your choose, whatever you want! Multi functional, Rotatable, Convenient, Steady3-in-1 Smart design Vansky car mount not only has the 3-in-1 usage in dashboard, windshield or air vent, but it is also equipped with 3 holders in one package: one holder one mount. Users can use three of them without any disassembly at the same time and can service multiple devices and vehicles for your needs. Features: Multifunctional, Convenient, Steady, Safety Over current and over voltage protection Full 360-degree adjustable rotation for optimal viewing angle Adjustable holder to view your device at any angle or orientation while driving Easy install- Easy one press button releases the device with just a push of a finger Compatible with most smartphones, GPS, pad, MP3/MP4 players, etc Package Included: 1 x Vansky Universal Bracket1 x Windshield Mount1 x Dashboard Mount1 x Air Vent Holder1 x User Manual: At Vansky, we stand strongly behind the craftsmanship of our products. That's why we them with 45 Days Money Back & One Year Hassle Free and provide Friendly, Easy-to-reach Support.

• ☑️ [3-In-1 Car Mount Solution] - Vansky car phone mount can be wall-mounted or clipped to your car's air vent / dashboard mount / windshield phone mount for convenience.
• ☑️ [Easy & Quick Installation] - No tools required. Easy one press button to releases the clamps on your phone with just a push of a finger.
• ☑️ [360 Rotation] - The 360 degree rotatable phone holder for car lets you find the perfect angle to view your smartphone at a quick glance.
• ☑️ [Strong Suction Cup] - Features strong suction cup that will hold your device steady so you can keep your focus on the road and your hands on the steering wheel.
• ☑️ [Compatibility] - The car mount can securely attach your smartphone between 3.5 inches and 7 inches. Extendable grip accommodates phone between 6.7-9.7cm width, not limited for iPhone 12 11 Pro X XR 7 6 6s Plus, Samsung series, LG series and others 3.5-7 inches smartphone and with soft padding, securely holds your device.

User questions & answers

Question:	Can a charging cable be used while phone is in the mount
Answer:	Yes, the two adjustable bars that hold the bottom of the phone are wide apart.
Question:	Will it accommodate the iPhone X
Answer:	I have the IPhone 8 Plus and only the main larger car mount piece that has the bendable arm and attaches to your windshield fits my phone (with & without cases on). The other 2 car mount attachments are to weak to hold it so it always will either tilt down or my phone just will fall off altogether. Not to mention the smaller wind shield attachment (the one without the bendable arm) my iPhone 8 Plus can’t even be used with it because the phone is too tall so it hits the windshield & dashboard causing it to just hang down so you can’t see your screen. I’ve attached pix in my review if you want to check it out.
Question:	The bottom supports dont seem to come out on mine? anyone else? am i missing somethihg?thanks
Answer:	It took me a second but they fold from the middle out. The hinge is on the out part and the hook is tucked into the middle. Once you figure that out it's easy.
Question:	How long is the flexible gooseneck, starting from the center of the base with it bent at 90 degrees? Thanks
Answer:	It's about 9". I left it in my RV so I don't have it here to measure. You can bend it 180 degrees if you wanted to. Very flexible.

Product features

Vansky 3-in-1 Car Phone Mount - 3 Ways for Your Choose, Whatever You Want

Our Vansky 3-in-1 Design phone holder for car offers you 3-way mounting, it can be wall-mounted or clipped to your car's air vent / dashboard mount / windshield phone mount for your needs. Vansky phone holder for car is multi functional, rotatable, convenient and steady. 360 Rotation fully adjustable with 360-degree rotation for quick portrait and landscape views, you can always find the perfect angle to view your smartphone at a quick glance.

Main Feature

Flexible gooseneck and 360 degree rotating holder allow you to position your phone or GPS horizontally, vertically, or tilt in any direction, provide the optimal viewing angle, view your device at any angle or orientation while driving.

Hands Free

Comes with easy-to-assemble parts that no tools required. Strong suction cups secure firmly to your vehicle. To adjust the position of the car mount, simply lift the lever at the base of the mount and adjust the position before reattaching and then press down to lock it.

Compatible With Most Phones

With its soft padding, it securely holds your device between 67mm and 97mm, including but not limited for GPS, iPhone 7plus 7 6s 6s+ 6 6+ 5 4, iPod, Samsung Galaxy S7,S6, edge Note 5 4 ,LG G5 G4 Nexus 6P 5X,HTC One, Smartphone and GPS devices.

Super-Strong Suction Cup

Thanks to its super-strong suction cup, the car mount is able to adhere to smooth surface & attach itself firmly to some textured surface. You can keep your focus on the road and your hands on the steering wheel. Besides, it is easy to clean, rinse with water then air dry.

3-In-1 Smart Design

The car phone mount can be wall-mounted or clipped to your car's air vent / dashboard mount / windshield phone mount as for your convenience.

• ✔【Powerful Suction Car Phone Mount】: The suction cup of our car Phone holder is washable, you can install it on the dashboard or windshield. Apply to most of cars,trucks, SUV, trucks and it as good assistant for Uber taxis drivers.
• ✔【Easy to Install& Protection】: No need installation tools! Just fix the suction cup to the desired surface and lock it in place. Before installation, make sure that the surface has been wiped and cleaned.The car phone holder is made of high-quality ABS plastic and anti-scratch pad, which can ensure full protection for your favorite phone.
• ✔【Adjustable Angles 】: It has a 360-degree rotatable spherical rotating device and a telescopic arm. Just pull or push the adjustment device to get the correct length, 360 degree rotation and 270 degrees up and down support the phone vertically and horizontally, allowing different angles to provide you with a perfect view.
• ✔【Widely Compatibility】: This car phone holder adopts one hand release and one key close design, so that it is compatible with 4-7 inch mobile phones, such as iPhone 11 Pro Max, XS MAX, XR, X/8/7 /6 Plus etc.
• ✔【Package Contents & Warranty】- 100% satisfaction with 1-year warranty and lifetime support. If you have any problem with this problem, please just contact us.

User questions & answers

Question:	Will the car dashboard phone holder work on a desk and other wooden surfaces
Answer:	Yes,of course. This car cell phone holder dashboard can not only be used in the car, but also can be applied to desks or similar wooden desks surfaces.
Question:	Does car cell phone holder works well for iPhone 12 Pro max
Answer:	This koopao cellphone holder stand compatible with IPhone 12Pro Max
Question:	How to mount on the dashboard? I want to install one in my husband's car
Answer:	/Duration -:-Loaded: 0%Stream Type LIVESeek to live, currently playing liveLIVERemaining Time -0:00 Playback Rate1xChaptersChaptersDescriptionsdescriptions off, selectedCaptionscaptions off, selectedAudio TrackFullscreenThis is a modal window. .noScriptDisplayLongText { display : none; } .noScriptNotDisplayExpander { display : none; } .noScriptDisplayLongText { display : block; } This is an upgraded version of the car bracket, which is not easy to shake or fall. The angle can be adjusted to facilitate disassembly or other operations directly, so that it is more convenient and safe for the owner to answer the phone while driving. Please refer to the attached video for operation.
Question:	The car phone mount is just an iPhone holder or charger to
Answer:	The Cell phone holder compatible with IPhone 4/5/6/7/8/9/X/XR/11,but don't support charging only stand

Product features

Washable Suction

Super strong vacuum suction cup features a layer of sticky gel and a locking lever which can maximize the stability and keep the mount in place.

270 Degree Rotation

The adjustable arm and 270° rotation could help you find the most suitable angle for safe driving.

Widely Compatibility

Compatible with Samsung Galaxy S10+/S10/ S9+ / S9 / S8 / S8+ / S7 edge / S7 / Note 8, Note 9 and S6/S6 edge, Note 5 and other Qi-enabled phones

LG - G7 / G7+ / V30+ / V30 / V35 and later

Phone XS Max / Phone XR / Phone XS / Phone X / Phone 8 / Phone 8 Plus and later Standard Charge Mode

• [2018 Upgrade] Upgraded viscosity and firmness. 5 sticky points are added at the bottom to ensure a strong adsorption without leaving any marks. In case of being soiled, they will recover as before once being washed with water. Close fit for the angle between phone and silicone adapts to multiple road conditions such as emergency braking, speed bumps and rugged mountain roads
• [Safe Driving View] Being placed on the dashboard of the car, it achieves a scientific view that does not block your driving sight and allows you to operate your device without lowering your head. The ergonomic viewing angle and opaque screen focus on making driving safer that does not block your driving sight and allows you to operate your device without lowering your head. The ergonomic viewing angle and opaque screen focus on making driving safer
• [Adjustable Design] Easy to operate with one hand. Simply insert the two bases into the console pad to adjust the width optionally. Place your devices horizontally or vertically. Easy to disassemble and assemble, convenient and practical
• [Compatibility] Flexible and removable structure is applicable to mobile phones ranging from 4 to 7 inches such as iPhone X 8 7 7 Plus, Samsung S8 S7 S6 Note, Nexus, Pixel, Huawei, Xiaomi, LG, Sony, HTC or other devices
• [365/24/7] The environmental silicone is non-toxic and tasteless, ensuring a delicate texture and comfortable hand feeling.

User questions & answers

Question:	Does it has enough room to plug charging cable for an iphone in the vertical position
Answer:	I have a Samsung Galaxy 9 phone that I use in the horizontal position with the charging cable attached. I don't think it would work as well in the vertical position.
Question:	Does anyone know if it works with the Note 9 with an otterbox case
Answer:	Dear Customer, Merry Christmas. Thank you for your question. Yes,this cell phone holder for car can hold Note 9 phone with an otterbox case. Because it 's adjustable,you can adjust it according to your phone. Thank you Have a good day
Question:	Can i use with my new samsung galaxy s9 plus
Answer:	Dear Customer, Merry Christmas. Thank you for your question. Yes,this cell phone holder for car can hold Samsung galaxy s9 . Because it 's adjustable,you can adjust it according to your phone. Thank you Have a good day
Question:	Will this work on a textured dashboard
Answer:	Yes, very nice product. Frequently bought together and works well with 🌈🌈 Guanda Bluetooth FM Transmitter for Car Bluetooth Adapter High-end Car Music Player 🌈🌈

Product features

No Marks

5 sticky points are added at the bottom to ensure a strong adsorption without leaving any marks. The silicone material is wear-resistant, durable, washable and reusable. In case of being soiled, they will recover as before once being washed with water.

Flexible and Adjustable Struct

The DIY removable structure allows you to freely adjust the width. Choose the most suitable distance for fixing device and select to place the device horizontally or vertically. The fixing holes and fish-shaped hooks on both sides ensure that the device is stable, and are adapted to multiple road conditions such as emergency braking, speed bumps and rugged mountain roads.

Multiple Functions

In addition to being placed on the dashboard of the car to provide you with the best view and safe driving, this silicone phone stand for car can also be used in your office, bedroom and living room for you to watch videos and liberate your hands. Or it can be used to accommodate some suitable objects such as glasses.

Universal Washable Dashboard Mounts

Suitable for most 4 to 7-inch mobile phones, such as the iPhone 8 X 7 6 6s Plus 5S SE, Samsung S8 S7 S6 Note, Nexus, Pixel, Huawei, Xiaomi, LG, Sony, HTC, and even cell phones that come equipped with an outer casing, such as the Otterbox or LifeProof; This holder is also suitable for most GPS navigators, such as the Garmin Nuvi Drive DriveSmart DriveAssist, the TomTom GO Start, the Magellan RoadMate and so forth; Suited to most vehicles - particularly SUVs such as those made by Ford, Chevrolet, GM, Subaru, Volkswagen, Benz, Cadillac and KIA.

• [Upgrade Double Clip]: Padding with silicone cushion , anti-sratch clips is friendly to cars air vents and won’t hurt your airvent . even driving on bumpy road, this car phone mount still can keep stable on vehicle airvents With strong grip strength Note:This car phone holder only fits for horizontal or vertical vehicle vent .Not fit for circle vents
• [Anti-Scratch & Slip]: This car vent mount ,padded with soft silicone cushion on clamps and back surface ,won't make any scratch on your cell phones .This car mount can hold cellphone securely and keep in place,it can protect celphone from slipping or jostling
• [360 Degree Rotating]:This phone holder for car supports portrait and landscape viewing, free joint ball allow quick swivel for your best viewing angle. Handsfree cell phone holder for car never blocks your driving sight. Ideal design meets dairly needs like charging for smartphone ,listening to music,making a call or GPS navigation
• [Quick Release Button]:This car mount features with simple and practical one click release button. So our car cell phone holder could help you unlock the sides and unmount your phone for grab and go use with less stress and faster efficiency
• [Wide Range Compatibility]:This best car phone holder fits for 4-7inch smartphones , adjustable autoclamping arm is extendable from 2.3-3.8 inch width,so this mobile phone holder for car is compatible with iPhone 11 Pro Max Xs Xr X 8 7 6 6S 5 Pluse 4 5S 4S Samsung Galaxy Note S10 S10+ S10e S9 S8 S7 S6 S5 S4 10 9 Google Pixel 3 XL Nexus 6P LG Moto HTC Nokia Onepluse

User questions & answers

Question:	I have a 2010 Corolla the vents are slightly titled and my good
Answer:	Sarah Feldt: The mirror is shatterproof acrylic.Sincerely, Frank Alexander, Front Row Experience LLC
Question:	I have a 2019 toyota tacoma. the vents are a little thicker than most vents. will this work for my truck
Answer:	Clear like a regular mirror. It's just hard plastic instead of glass. We love it.
Question:	I have a my phone in one of those power bear battery cases. Will i have to remove my phone out of it or can it hold the weight
Answer:	You could move it up or down on the wall but you would have to take it off the wall first (and the mirrors, it is three parts) to remount it. For whatever it is worth, I did love this bar and would recommend it.
Question:	Will this phone mount often fall from the airvent
Answer:	Dear friend, thanks for your question. For baby's safety, we use soft, not fragile mirror materials. Like most of baby mirror, this type of mirror will be a little distorted when looking at it. Thanks for your attention and have a nice day!

Product features

Take a Glance

One Touch Release

Car cell phone mount can help you to expand clamping arms fastly by press releasing button on the back,which help you concentrate on driving

Horizontal and Vertical Air Vent

The design of the grip makes the smart phone car mount only suitable for horizontal and vertical vents blade, not suitable for circular ac vents . It's a great option for cars which is equipped with horizontal and vertical vents.

Upgraded Double Clip

New designs double clips can enhence the grip strength so that car vent phone mount will stay firmly on vehicles ari vent

Easy to Install

It's easy and convenient for you to install Newppon gps car mount in cars trucks or SUV airvents with inserting the blade into the grips of car mount .

Step 1

Unscrew the nut from the car phone stands ;place the screw-nut into joint ball.

Step 2

Insert the ball with nut into slot on the back of car phone support

Step 3

Tighten the screw nut on mount

Step 4

Install car phone stands into conditioner vent

• 【Super Sticky Gel Pad】Attach to windshield, dashboard or most smooth flat surfaces. They will not fall off even in turns, bumps or when the speed too fast. The car mount can be restored to its mint condition by rinsing it with warm water and allowing it to air dry.
• 【How to Use the Suction】Keep clean where you install the phone mount. Open the lock lever before using, press the base until there is no air gap between the base and the suction,then lock the button, rather than stick directly to the dashboard or windshield.(Note: try to avoid direct exposure to the sun.)
• 【Telescopic Arm】 Adjustable telescopic arm accommodates desired length up to 6.3 inches, you can adjust the distance as your wish.
• 【360°Rotations & Adjustable Height】Swivel ball head allows 360°free rotations to your desired viewing angle. The adjustable Fixed switch helps you adjust the car mount to the perfect height.
• 【Warning】Due to the flexible nature of the gel, some discoloration or residue may be left depending on the type of surface that it is mounted on. Please note, most likely will not work on leather/ vinyl dashboards.

User questions & answers

Question:	I have a cool pad will it fit it and hold it in place Like it should
Answer:	It actually holds my iPhone XS Max very well.
Question:	Is this product heavy duty? What material did they use
Answer:	Not sure of material. It's a heavy duty plastic. Not flimsy at all. We use it in a sedan on the windshield with the shortest extension (best strength) for a iPhoneX with thin case and credit card holder (a little more weight and size). It's been holding every day for months.
Question:	Will this hold the galaxy S
Answer:	sure. Very nice product! I would like to recommend a good product working very well together with your phone and this holder product: ✅Guanda Bluetooth FM Transmitter for Car Bluetooth Adapter ✅
Question:	How do I attach the two pieces together? Pushing them together doesn’t work
Answer:	Mine will not attach either. The 2 parts are not matched. The ball on the arm is 14mm dia but should be at least 16mm

• Worry Free Driving - The Durahold Series with a re-designed extendable car mount securely holds your smartphone to your dashboard or windshield providing you with a hands-free driving experience! Featuring extendable arms to accommodate smartphones of all sizes and an anti-slip pad to completely hold your device in place. (Compatible with most smartphone, including iPhone 12/11 Pro Max, XR, XS Max, 8+, X, 8 7, Galaxy S20, S20+,10, S10+, S10e,S9 S8 S7, Note 20 10, LG, Pixel, HTC and more.
• Easy To Install - No tools necessary for installation! Simply adhere base of Car Mount to desired surface and lock it in place. Ensure surface has been wiped down and cleaned before installing. (Note: It is highly recommended to use the Adhesive Mounting Square (included) on uneven/textured surfaces. Install car mount on top of this base for the best hold).
• Versatile Angles - Featuring a ball swivel for 360-degree rotation, jointed arm for easy movement and an extendable neck for extended viewing. Rotate your smartphone in any orientation (horizontal or vertical) and at any angles, giving you the most comfortable and perfect viewing experience.
• Powerful Suction - Equipped with a suction-cup gel pad that provides strong suction and leaves no residue behind. The ultra-strong suction cup can be reconditioned back to its original form by rinsing the suction down with warm water and allowing it to air dry. Also features a two-lock locking mechanism for that extra secure hold.
• What You Get - Limited One Year Warranty from Maxboost ensures maximum protection for your Maxboost Extendable Arm Car Mount.

Product features

UNIVERSAL COMPATIBILITY

The one-touch side button for a quick release, while the retractable arms for an snug-fit.

EXTRA STRONG

Multi-knobs securely holds your smartphone to your dashboard and windshield.

ADJUSTABLE VIEWING ANGLES

Adjustable arm extends and contracts to provide user with a comfortable mobile experience.