12 best car mount for cell phones

Product description

Kindly Note:

1. Not recommended to install the car phone mount on too rough or curved dashboard surfaces.

2. Peel the protective film from the suction cup bottom before use.

3. The preferable installation area for the stabilizer base should be close to the phone holder for maximum stability.

4. Let it sit for 24H after installation.

• FREE INSTALLATION & UNOBSTRUCTED SIGHT: Mpow focuses on the innovative and smarter mounting solution and blazes past other traditional dashboard car mounts. Up to 15cm/5.9in aluminum long gooseneck sends the dashboard Phone mount much closer to you without blocking your sight, giving you the freedom to position it on multiple locations on the dashboard or windshield. Most importantly, it can be bent to avoid obstructing display and irregular vents
• STRONG SUCTION CUP WITH STICKY GEL: super strong vacuum suction cup features a layer of sticky gel and a locking lever which can maximize the stability and keep the mount in place. Comes with an anti-shake stabilizer, it safely hold the device without vibrating and wobbling even on rough roads. The suction cup is reusable and washable, Simply rinse in water and let air dry to restore the stickiness.
• HOLDS PHONE AND CASE COMBINATIONS: the adjustable side clamps extend from 1.8in to 3.7in, compatible with most smartphones with screens up to 6.5” and even worn its case. (Galaxy S10/S9/S8/S7/S6/J5/J3/A5/A6/A7, Huawei P20/Mate10/Mate20/honor 8X, iPhone 11 Pro/ 11 Pro Max/ X/XS/XR/8Plus/8/7Plus/7/6Plus/6S/6, Sony Xperia Xz3/Xperia Xz2/Xperia Xz2 compact, Xiaomi Redmi Note 6 Pro/Redmi Note 5 Pro/Redmi Note 5/mi 8 Pro/mi 8/Mi8 Lite/mi A2/MI A2 Lite/mi A1, LG G5/G6/V30/V20 und MP3 )
• VIEW YOUR PHONE AT ANY ANGLE: The flexible and durable gooseneck can be bent to the shape you like, allowing for flexible adjustment for easy positioning and access to device controls. Thanks to the 360 degrees ball-head, the dashboard mount can be flexibly tuned to display at an optimal viewing angle, either in landscape or portrait mode for convenient navigating, calling, and music in the vehicle
• BUILT TO LAST AND PROTECT: the polished surface makes the mount look sleek in your car. The heat-resistant PC and ABS materials make Mpow dashboard Phone holder sturdier than other Pure ABS mounts. The foldable holding feet allow hassle-free charging on the go. The Sponge-Padded surface and grips of the cradle prevent slipping and scratches. Note: Please avoid the car mount if you use a pop grip. It cannot hold phones with your Pop Mount/Pop out stand/expanding stands

Product features

MPOW Universal Dashboard Car Phone Mount

The quick-release button allows you to release and install your phone with one hand motion in seconds.

The side arms expand up to 94mm/3.7in wide, fits most phones such as:

Reusable & Washable Sticky Gel

The car mount’s suction cup has a coating of sticky gel that prevents air gaps from forming. To renew the gel adhesive, just rinse with water and let air dry

Assemble the Car Mount

• Step 1. Unscrew the knob;
• Step 2. Pass the knob through the ball head;
• Step 3. Tightly push the ball head into the socket of the cradle, then tighten the knob.

Package Contents

• 1 x Car Phone Holder
• 1 x Suction Cup Base
• 1 x Anti-shake Stabilizer
• 1 x Manual
• 2 x Spare Sticky Adhesives for Stabilizer

• Widely Compatibility : The dashboard cell phone holder is suitable for most kinds of cell phones or GPS devices which are between 6-12mm thick. Including iPhone 11/11 Pro/11 Pro Max/ XR/ XS/ XS Max/ X/8/8 Plus/7/7 Plus/ 6s /6s plus/6/6 plus/5Se/5s/5/4s, Samsung Galaxy Note 8 /9/10 /10 pro/20 ultra, S20/S 8 /9 /10, S 20 plus/ 8 plus / 9 plus /10 plus, S 7 Edge, Nexus, Pixel, LG, Sony, HTC, IPAD, Huawei, Mi, Garmin and so on
• Stable & Slip free : Dependents on its soft silicone-textured bottom and sticky pads, it can protect phone against bumping, scratching or flying out whenever there is an emergency braking, sudden stop and sharp turn
• Washable & Reusable : The bottom of the car phone holder is made from high-tech adhesives. Just rinse with water and dry it, it will be the same as the new one
• Use Tips : Peel off the sticky film on the bottom of the car phone holder and ensure your car dashboard surface being dry and clean (no dust) before laying the holder on

User questions & answers

Question:	Does heat effect the secure hold & does it leave any residue when removed
Answer:	Just got it few days ago but were out all day yesterday in heat of sun and it stayed secure. I had wondered about residue too and just went out and checked and it it does not! I am sold now! I put it in center of dash which I like better then off to side or the ones that fit in your cup holder so you would be looking down.
Question:	Could someone please provide the dimensions of the base pad area? (Length and width
Answer:	The length is 5.1 in,and the width is 5 in.The holder can support the phone firmly.
Question:	Can it be used with the phone vertical
Answer:	I am afraid that it can not be used with the phone vertical. It can be used with the phone horizontal conveniently.
Question:	Will this fit a phone in an otterbox
Answer:	It fit my phone in an Otterbox. It stands up straighter with the Otterbox case on, but it stays put.

Product features

Loncaster Cell Phone Holder for Car, To make your drive easier

Note

Compatible devices：

1. The dashboard car phone holder is suitable for all cell phone devices with 6mm-12mm thickness. Including compatible for: iPhone 11/11 Pro/11 Pro Max/ XR/ XS/ XS Max/ X/8/8 Plus, Samsung Galaxy Note 8 /9/10 /Note 20 Ultra , S20/S9 /S10, S20 Plus / Nexus, Pixel, LG, Sony, HTC, IPAD, Huawei, Mi and other more devices.

2. It needs a smooth flat area(5 x 5.1 inches) on your dashboard for installation. Besides, it won't work well if your devices covered a thick case, especially the otterbox, life-proof and pop socket.

3.Applies to the most majority of dashboards, except some curved surfaces like 2016 Subaru Impreza, 2016 Nissan Frontier, mini cooper, 2016 Audi Q7, Honda Civic, 2009 Honda Accord, 2010 Honda CRV, 2008 Toyota Yaris, Toyota Rav 4 2018, Toyota Corolla, BMW i3, 2013 Audi A7, Scion XD, 2011 Tacoma, 2006 Jeep Wrangler, Jeep Cherokee, 2016 Nissan Sentra, 2018 golf GTI, 2019 Prius, Ford Fiesta 2016, Hyundai Genesis Coupe, Mercedes Benz CLA 250, 06 Acura MDX, etc.

One-hand Operation

Easy to mount, release and operate the phone with one hand. No distraction while driving.

No Harm To Your Device

Designed without magnets, full silicone material avoid your phone be scratched. A gel pad is easy to clean. no leave residue on the dashboard.

Stable & Non-Slip

Premium Silicone-Made, Non-Slip Technology holds your phone tightly to keep driver and cell phone safe.

Multi-purpose Phone Stand

Frequently Asked Questions :

Q: Will it fit with a pop socket attached to the back of the iPhone?

A : No. There is a solid panel behind the phone when it is placed in the holder.

Q : Can I use it with a fuzzy dash cover? Is the back part weighted at all?

A : No, the back is not weighted and it would not work with a fuzzy dash cover.

Q:Can this be placed on a curved or carpeted dashboard navigation mat?

A : No, this appliance has a peel layer and under is adhesive on bottom of unit.

Q: Can I take it back and forth from the car to the house?

A: Yes, it doesn't permanently stick to anythin. You can take the holder with washable rubber back and forth from the car to the house. It can be used repeatedly.

Q :Will it be better than a magntic holder or suction holder to the window or dashboard？

A: Yes, absolutely better than magnetic. It won't budge and hold the phone in a horizontal position securely.

Product description

Wide Compatibility

iPhone: 11 Pro Max / 11 Pro / 11 / Xs / Xs Max / XR / X / 8 Plus / 8 / 7 Plus / 7 / 6s Plus / 6s / 6 Plus / 6 / SE / 5s / 5c / 5/J7/J6/J5/J3;

Galaxy: Note 10/ Note 10+/ S10 / S10+/ Note 9 / S9+ / S9 / Note 8 / Note 5 / S8+ / S8 / S7 / S7 Edge / S6+ / S6 / S5;

Google: Pixel 4 XL/4/ 3 XL / 3/ 2XL/ 2/ XL/ Pixel, Nexus 6P/ Nexus 5x;

LG: G7/ G6/ G6 Plus/ V30/ V30 Plus/ V20;

Xiaomi: Redmi Note 8/ Note8 Pro/ Note 7

One Plus: 7T/ 7T Pro/ 7 Pro/ 7/6T

Motorola: P50/ P30/ G7/ G7 Plus/ G7 Power/ G6

Huawei: P30/P30 Pro/P20/Mate 20 Pro/P20 Lite/P10/P9/Nova/Honor 10；

Sony, HTC, Nokia, Motorola, Blackberry and more smartphones



Warm Prompts

1. Make sure there is a CD slot in your car before purchase.

2. Not suitable for ultra-wide, closed-type, or irregular CD slots.

3. It is recommended to remove the thick/bulky phone stand holder on the back of the phone/case.

4. When inserting or ejecting a CD, you have to remove the CD slot phone holder first.

• CONVENIENT FOR GPS NAVIGATION AND CALL- MPOW car phone mounts are essential to keep car drivers safe on the road by allowing drivers to keep both hands on the wheel and keep an eye on GPS navigation. The cell phone car mounts reduce the likelihood of accidents that can harm you and your passengers.
• PHONE COMPATIBILITY-The arms extend from 1. 8in. /4. 5cm to 3. 8in. /10cm. The 0. 6in. (1. 5cm) deep arms work well to hold models from 4. 7’’~6. 8’’, even with a thin case on, including but not limited to the new iPhone 12/12Mini/12Pro/12Pro Max/11 Pro Max/11 Pro/11/Xs Max/XR/XS/X/8 Plus/8/7 Plus/7; Galaxy Note10+/Note10/S10/S10e/S10+/S9+/S9/Note 9/Note 8/S8; Pixel/Nexus; LG; OnePlus; Xiaomi; Moto and more.
• CD SLOT MOUNTS-Does your car CD player go unused? Make it functional again with MPOW phone holder. The base slips into your CD slot; then, it expands and locks into place, so your phone is always safe and stable. NOTE: Flip over to install for wider compatibility with different cars.
• THREE SIDES GRIP DESIGN- MPOW car phone mount has three side grips to hold your device in place. A little button along the sides can be pushed which prompts the phone to pop out of the mount. What’s more, you get a 360-degree rotation for great viewing angles.
• FITS 99% OF THE CD SLOTS: The car mount base won’t damage your CD slot, and can have its width customized for a secure fit by turning the knob, making the CD slot mount suitable for most vehicles with a standard CD player. You can still listen to CDs with the mount installed.

Product features

Foldable Supporting Feet

In the bottom of the clamp, you can see two supporting feet, which is designed as foldable for various situations. The distance between the feet is widened to 1.8 inches, allowing a convenient access to charging port and home button.

Reliable Mount Stability

To ensure the maximum security of your phone and the stability of the phone holder, there are 3 anti-skid rubber pads come with the phone mount. Please make sure of sticking the rubber pads on the CD connector before using it.

Compatible with More Cars

Thanks to the 360° rotatable ball joint, not only the clamp but also the base are rotatable. Some cars have the screen or buttons above the CD player, others have them below the CD slot. You can install either side up or down to fit your car.

Product description

Vansky 3-in-1 Car Phone Mount - 3 ways for your choose, whatever you want! Multi functional, Rotatable, Convenient, Steady3-in-1 Smart design Vansky car mount not only has the 3-in-1 usage in dashboard, windshield or air vent, but it is also equipped with 3 holders in one package: one holder one mount. Users can use three of them without any disassembly at the same time and can service multiple devices and vehicles for your needs. Features: Multifunctional, Convenient, Steady, Safety Over current and over voltage protection Full 360-degree adjustable rotation for optimal viewing angle Adjustable holder to view your device at any angle or orientation while driving Easy install- Easy one press button releases the device with just a push of a finger Compatible with most smartphones, GPS, pad, MP3/MP4 players, etc Package Included: 1 x Vansky Universal Bracket1 x Windshield Mount1 x Dashboard Mount1 x Air Vent Holder1 x User Manual: At Vansky, we stand strongly behind the craftsmanship of our products. That's why we them with 45 Days Money Back & One Year Hassle Free and provide Friendly, Easy-to-reach Support.

• ☑️ [3-In-1 Car Mount Solution] - Vansky car phone mount can be wall-mounted or clipped to your car's air vent / dashboard mount / windshield phone mount for convenience.
• ☑️ [Easy & Quick Installation] - No tools required. Easy one press button to releases the clamps on your phone with just a push of a finger.
• ☑️ [360 Rotation] - The 360 degree rotatable phone holder for car lets you find the perfect angle to view your smartphone at a quick glance.
• ☑️ [Strong Suction Cup] - Features strong suction cup that will hold your device steady so you can keep your focus on the road and your hands on the steering wheel.
• ☑️ [Compatibility] - The car mount can securely attach your smartphone between 3.5 inches and 7 inches. Extendable grip accommodates phone between 6.7-9.7cm width, not limited for iPhone 12 11 Pro X XR 7 6 6s Plus, Samsung series, LG series and others 3.5-7 inches smartphone and with soft padding, securely holds your device.

User questions & answers

Question:	Can a charging cable be used while phone is in the mount
Answer:	Yes, the two adjustable bars that hold the bottom of the phone are wide apart.
Question:	Will it accommodate the iPhone X
Answer:	I have the IPhone 8 Plus and only the main larger car mount piece that has the bendable arm and attaches to your windshield fits my phone (with & without cases on). The other 2 car mount attachments are to weak to hold it so it always will either tilt down or my phone just will fall off altogether. Not to mention the smaller wind shield attachment (the one without the bendable arm) my iPhone 8 Plus can’t even be used with it because the phone is too tall so it hits the windshield & dashboard causing it to just hang down so you can’t see your screen. I’ve attached pix in my review if you want to check it out.
Question:	The bottom supports dont seem to come out on mine? anyone else? am i missing somethihg?thanks
Answer:	It took me a second but they fold from the middle out. The hinge is on the out part and the hook is tucked into the middle. Once you figure that out it's easy.
Question:	How long is the flexible gooseneck, starting from the center of the base with it bent at 90 degrees? Thanks
Answer:	It's about 9". I left it in my RV so I don't have it here to measure. You can bend it 180 degrees if you wanted to. Very flexible.

Product features

Vansky 3-in-1 Car Phone Mount - 3 Ways for Your Choose, Whatever You Want

Our Vansky 3-in-1 Design phone holder for car offers you 3-way mounting, it can be wall-mounted or clipped to your car's air vent / dashboard mount / windshield phone mount for your needs. Vansky phone holder for car is multi functional, rotatable, convenient and steady. 360 Rotation fully adjustable with 360-degree rotation for quick portrait and landscape views, you can always find the perfect angle to view your smartphone at a quick glance.

Main Feature

Flexible gooseneck and 360 degree rotating holder allow you to position your phone or GPS horizontally, vertically, or tilt in any direction, provide the optimal viewing angle, view your device at any angle or orientation while driving.

Hands Free

Comes with easy-to-assemble parts that no tools required. Strong suction cups secure firmly to your vehicle. To adjust the position of the car mount, simply lift the lever at the base of the mount and adjust the position before reattaching and then press down to lock it.

Compatible With Most Phones

With its soft padding, it securely holds your device between 67mm and 97mm, including but not limited for GPS, iPhone 7plus 7 6s 6s+ 6 6+ 5 4, iPod, Samsung Galaxy S7,S6, edge Note 5 4 ,LG G5 G4 Nexus 6P 5X,HTC One, Smartphone and GPS devices.

Super-Strong Suction Cup

Thanks to its super-strong suction cup, the car mount is able to adhere to smooth surface & attach itself firmly to some textured surface. You can keep your focus on the road and your hands on the steering wheel. Besides, it is easy to clean, rinse with water then air dry.

3-In-1 Smart Design

The car phone mount can be wall-mounted or clipped to your car's air vent / dashboard mount / windshield phone mount as for your convenience.

• 2 PACK MAGNETIC CELL PHONE HOLDER FOR CAR --- Meet your multiple location installation needs especially when you are in an uber drivers part-time job. The 3M adhesive pad is easy to remove and will not leave any traces on your car. ( NOTE: The 3M adhesive pad is one-time use and may not fit for some uneven dashboards. Please feel free to contact us if you have any problems with the compatibility.)
• 2019 UPGRADED POWERFUL MAGNETIC --- Built-in 6 N52 super high-powered magnets, this car phone mount will firmly hold your cell phone in place whether driving on a bumpy road or brake suddenly. And you can just take your smartphone with one hand within a split second. Your best driving assistant.
• INFINITE VIEWING ANGLES - This universal car phone holder comes with 360 adjustable degree joint. Easily adjust position of your phone, so that you can get perfect sight. Open your sight and no block in sight to ensure safe driving. Even without phone on, this car mount can merge into the interior of your car perfectly.
• UNIVERSAL COMPATIBILITY --- The magnetic phone car mount fits all 4-7 inch iPhone and Android smart phones such as iPhone 11 Pro Max XR XS Max X 8 7 6 Plus Samsung Galaxy S10 S9 S8 Plus S7 Edge Note 10 9 8 Google Pixel 3a 3 LG Sony Nexus Nokia etc, small tablets and GPS devices like Garmin Nuvi 42/44/52/54/55/56/57/58
• WHAT YOU GET --- We provide premium car cell phone holder and 12 months Money Back Guarantee. #1 priority is to make sure you are always satisfied with our products. Perfect Birthday or Halloween gift for your friends and family.

User questions & answers

Question:	How strong is the magnetic force? Can it hold my iPhone
Answer:	Hey! My dad has an iPhone 7 plus and the car cell phone mount holds it perfectly in place! The magnetic force is really strong, so it would hold your iPhone 8 +
Question:	Does the magnet effect wireless charging
Answer:	Yes, it won’t work. However, I’ve attached it to my cover. So whenever I want I can remove it and it’s good for wireless charging.Just don’t stick the metal circle directly on the phone and it will be good
Question:	Would this work with a pop socket? If so, will it need to cover my pop socket design
Answer:	I didn't want to put it on my popsocket so I put it underneath my phone case where the apple logo usually is visible through a cut out in the case and works just fine
Question:	What are the dimensions of the mounting base with the adhesive? (The surface that mounts to the actual dash of the car
Answer:	to give a comparison it’s about the size of a Gatorade top.

Product features

360° ROTATION BALL JOINT

360° Rotating ball joint allows you to rotate your device, convenient having calls, playing music or having GPS guidance, provide the best viewing angle.

3M ADHESIVE PAD

The 3M adhesive pad is easy to remove and will not leave any traces on your car.

NOTE: The 3M adhesive pad is one-time use and may not fit for some uneven dashboards. Please feel free to comtact us if you have any problems with the compatibility.

HOW TO USE

1. Clean the mounting area surface

2. Affix the car mount

3. Firmly press and hold in place for about 1 minute

4. Let the car mount sit for at least 24 hours before using

NOTE:

1. NOT fit the curved surface.

2. Ensure surface is free of all dust and dirt, then let dry completely.

COMPATIBLE WITH

Universal for all 4-7 inch smart phones such as iPhone 11 Pro Max XR XS Max X 8 7 6 Plus Samsung Galaxy S10 S9 S8 Plus S7 Edge Note 10 9 8 Google Pixel 3a 3 LG Sony Nexus Nokia etc, small tablets and GPS devices like Garmin Nuvi 42/44/52/54/55/56/57/58

NO INTERFERENCE

The strong magnetic field is closed within the car mount. So the magnets won't affect your phone bluetooth, signal strength or WIFI.

WHAT'S IN THE BOX

Magnetic Phone Car Mount x 2

Round Metal Plates × 2

Rectangle Metal Plates × 2

Transparent Stickers × 2

• 【2020 Latest Design-Never Fall Off】Miracase car phone mount adopts 2020 latest fall-proof locking design which holds your phone securely to the vent. The clip hook will catch one of the car air vent blades. The spring-clip plate and the tightening nut will provide absolute fixation. This car phone holder has stable trapezoid-structure clamps with thickened shockproof sponge and rubber, which could hold the phone steadier than others. It will never fall out like other products no matter how bumpy
• 【Universal Compatibility】Miracase car cell phone holder has an adjustable mount which makes it widely compatible with smartphones or electronic devices from 4.5 to 6.5 inches(width size from 2.1-4.05 inch),such as iPhone 11 Pro Max / 11 Pro / 11 / XS MAX /XS/XR/X/8/8 Plus/7/7 Plus/6s/6 Plus. Also compatible with Samsung Galaxy Note 10 / Note 10+ /S10/S10+/S9 / S8 / S8+ / S7 / S7 Edge / LG Google etc.
• 【360 Degree Adjustable View Angle】The 360-degree rotatable head will provide you with the best viewing angle, so you could see the phone screen clearly and keep secure driving rather than limited by view angle or unwieldy phone holder for car. You can place your phone in any orientation(horizontal, vertical and more), it is easy to ensure driving security with this handsfree air vent phone holder for car. Just enjoy the best driving experience.
• 【Single-handed Operation】With quick-release button and adjustable clamp arms, Miracase car air vent phone holder makes it very easy to insert and remove your phone with a single hand. Provide you with safer driving whether you are talking, navigating, listening to music or charging.

Product features

Miracase Car Phone Mount-2021 Upgraded Version

Miracase Phone Holder for Car

2021 Upgraded Vent Clips:

Miracase car phone holder adopts 2020 latest design, it will never fall off even on bumpy off-road roads.

Great Choice for Decent Present:

Unique design inspiration makes it stand out,it's a great holiday gift for family and friends.

Installation Instructions

1. Unscrew the screw nut 1, place it onto the ball head.
2. Insert the ball head into the socket of clamp head until you hear a "click".
3. Tighten the screw nut 1.The tighter the nut, the harder it is to rotate the clamp head.
4. Loosen the screw nut 2 until it attaches to the screw nut 1.
5. Make the clip hook downward and pull open the clip plate,push the hook into the air vent grille to catch a blade,then release the spring clip plate to make it fix to the air vent.
6. Make sure the product is already installed stably,then tighten the screw nut 2.Installation complete!!

Note:

• Don't install the product on the blade at the top or bottom.
• Remember to never text while driving.

• [Stick - Sticker - Stickiest] This universal car cell phone holder uses Torras's third-generation suction cup, with three layers of super glue, which makes the mount sticks firmly to your car dashboard or windshield.
• [Strong Muscular Arms] Based on a year-long test, we found the most suitable wrapping angle for the car mount. The designed arm is more wrapping than the normal mounts. It hugs the "child" tightly like a father's thick arm.Such a strong arms is a perfect choice most of the phones, especially the big phones, such as iphone 11 pro max.
• [Skidproof! Scratch-proof!] Torras never ignores every detail, even the small silicone pads, which have been rigorously tested. For most of the silicone pads on the market, we use the latest vacuum nanotechnology, which can adjust the shape of the silicone according to the size of the phone, ensuring that there is no gap between the phone car holder and the phone! So you needn’t to worry about your phone suddenly falling off during the journey!
• [3 In 1 Multi-function] With the latest powerful suction cup and air vent clip, this car phone mount could be installed the cell phone holder on car dashboard, windshield or air vent securely. Even on the off road, it won't stop working; Great choice to most of the cars, pickup trucks, SUV, trucks, taxis; good assistant for Uber, Lyft drivers.
• [Military Grade PP Material] Say goodbye to the easy-scratched plastic panel car mount .Adopt top quality PC and bite structure, passed the latest 17 shaping process. High quality and perfect appearance! It's not only a car holder in your car, but also a great decoration!
• [Super Secure Car Phone Holder] Unique streamlined inward shrinking clamp, hug your phone tightly, never fall off; Press the lock mechanism of the suction cup, it will make the car phone mount tightly locked on the dashboard; With the extra sticky pad, it helps create a smooth surface when the dashboard is not flat; Triangle air vent clip, as solid as a rock, you can rotate the wrench to tighten it according to the thickness of the vent; The supporting pieces will lock it from fall down.

User questions & answers

Question:	Do this fit iPhone X with a case on it
Answer:	My normal shoe size is 10.5 but some shoes I wear a 11 . I ordered these in an 11 and they fit great.
Question:	Will this car phone mount fit a note 10+ with an otter box case
Answer:	i wear 12 and it fit just fine
Question:	I have a iphone 11 pro max with an otterbox case, will it hold my phone
Answer:	They fit me like a high top basketball shoe. Just above the ankle.
Question:	Is this suction cup stable enough
Answer:	not sure if they are all like this but I'm a size 10 1/2 so I got a size 10. these fit perfect even after a year of using them.

Product features

Simple But Unique

• You don’t need to hesitate how to choose the car phone mount any longer. Choose this one, you are free to install it on the dashboard, windshield or the air vent. There must be a suitable installation method for you.
• Unique Streamlined inward shrinking clamp, hug your phone tightly, never fall off. It's like a pair of arms holding your phone tightly. Super secure for your phone.
• Latest internal gear structure! On the one hand, the open process will be smoother. On the other hand, the accuracy of gear engagement is higher. That means it will greatly reduce the possibility of gear work errors and extend the service life of the gears. Tests show that its average service life is more than twice of other one button open car mounts.
• Fit for more cars, more phones, more phone cases. The true universal car phone mount.

Best for you!

Product description

About SRUNP

Car Dashboard Phone Mount - SRUNP Cell Phone Holder for Car with Three-Point Support, 360 Degree Rotatable Washable Car Phone Mount Compatible with Smartphones and GPS Devices

 Why Choosing Us?

 · Adopts 3-point support design for maximum stability and security

· Made of anti-slip and scratch-resistant material

· Comes with 360 degree rotating base for any angle adjustment

· Can hold phones both vertically and horizontally

· Designed with high tech adhesive which holds tightly to dashboard

· 30-day money back service for quality insurance

 Specification

 Item: Cell Phone Holder for Car Dashboard

Material: Soft Silicone Rubber

Color: Black

Weight: 1.9oz

Chassis Diameter: 3inch

 Wide Compatibility

 The car phone mount is compatible with most phones including iPhone 11/11 Pro/11 Pro Max/ XR/ XS/ XS Max/ X/8/8 Plus/7/7 plus/ 6s /6s plus/6/6 plus/5Se/5s/5/4s, Samsung galaxy Note 8 /9/10 /10 pro, S 8 /9 /10, S 8 plus / 9 plus /10 plus, S 7 Edge, Nexus, Pixel, LG, Sony, HTC, IPAD, Huawei, Motorola and other GPS device with thickness less than 0.47inch

 Package Includes

 1 x Car Phone Holder for Dashboard

• [PATENT DESIGN] The car dashboard phone mount adopts the principle of triangular to ensure stability, steadily supporting your cell phone at three points without shaking or slipping. Soft silicone rubber material is anti-slip and protects your phone from scratches.
• [Convenient Design]The cell phone car holder comes with a base which can be rotated 360 degrees, which makes it possible to adjust angles as you wish as well as to ensure a safe and comfortable driving experience regardless of navigating or listening to music.The phone dash mount for car can hold your phone in both horizontal and vertical direction, which makes it easy for you to either watch movies or charge phones on the way.
• [STRONG ADHESIVE] The car mount holder is crafted with premium strong adhesive which sticks to the dashboard tightly, which protects your phone from bumping or flying out if you make a sharp turn or sudden stop if emergency happens. nano gel strong stick glue,reusable ,no traceless left.
• [Widely Compatibility] The dashboard cell phone holder is suitable for most kind of cell phones or GPS devices which are between 6-12mm thick. Including iPhone 11/11 Pro/11 Pro Max/ XR/ XS/ XS Max/ X/8/8 Plus/7/7 plus/ 6s /6s plus/6/6 plus/5Se/5s/5/4s, Samsung galaxy Note 8 /9/10 /10 pro, S 8 /9 /10, S 8 plus / 9 plus /10 plus, S 7 Edge, Nexus, Pixel, LG, Sony, HTC, IPAD, Huawei, Mi, Garmin and so on
• [100% MONEY-BACK] If you, for whatever reasons, do not like our dashboard cell phone mount within 30 days, please feel free to contact us and we will, within 24 hours, arrange a full refund or a replacement without any questions asked.

User questions & answers

Question:	Can this car mount be used to hold Alexa auto
Answer:	This is a mini mount with a diameter of 3.05 inches. It only needs a small area on the dashboard to be installed.
Question:	Is there a way to fix the stick padon the back of it? Mine fell onto a piece of paper
Answer:	I have no idea what the stick padon is. I have no idea how it works, wish I did. NO INSTRUCTIONS left me no knowing how to use it and now I am TUCK not having it working. Sorry I am not able to help you. I thought and it looked very easy to use, which it is as far as putting my cell on it. Other than that, forget it.
Question:	Can this phone car mount hold the GPS device
Answer:	Yes, the product description says it can hold the GPS with a thickness less than 0.47 inches. I have a small GPS device, and it fit the phone mount very well.
Question:	can this fit a flipcase
Answer:	If your flipcase is between 0.27 and 0.47 inches thick, this Car Phone Mount fit well.

• Versatile Magnetic Phone Mount: This car phone mount safely and quickly secure a mobile device to most flat surface except leather, vinyl and soft surface with the sticky gel on the base of the suction cup. (please use the included vhb dashboard pad if the surface you want to mount is not smooth but textured.) This phone holder for car compatible with all Smartphones for car, home or office.
• Super Solid Suction Cup: Our patented industrial-strength suction cup base provides a strong, secure hold power on the dashboards, windshields, countertops, desks, tables and other surfaces. (Please avoid to expose it to the sun in high temperature for a long time)
• Strong Magnetic Force: 6 powerful magnets hold your devices much more tightly than common magnets. Securely holds your cell phone in place on the dash or windshield even with your car on the bumpy of roads and with the heaviest of smartphones.
• Optimal Viewing Angle: 360 degree rotatable, adjustable and extendable telescopic arm to provide you infinite viewing angle. Innovative ball joint construction allows you to adjust 360 degrees. Telescopic arm can be extended from 4.6”/11.7cm-6.29”/16cm and can up or down for optimal viewing angle. No blind sides. Optimal viewing from almost any angle. No more screw to adjusting, just pull and push to adjust the length. Easy one hand operation!
• Quality Promise and Worry-free - APPS2Car Brand come with lifetime friendly customer service. From APPS2Car: Best Car Mount Designer and Supplier on the market, your phone has never had a better support system in the car!

Product features

QI Wireless Charing Metal Plate

• The APPS2Car Dashboard Mount comes with small round metal plate, specially designed for Qi Wireless Charging.
• Wireless charging phones place charge wirelessly in the middle of the charging pad which leave plenty of space above and below to place a plate which will not interfere.

Heavy Duty & Solid Suction Cup

Easy to Installation:

Place the car mount on the optimum position and then press down the “Lock” lever.

*Note:

- Clean the dashboard or windshield surface thoroughly to remove any dust or debris before installing the car mount.

- If the surface of your car’s dashboard is not smooth, but textured ,please use the adhesive dashboard pad (Please note the vhb adhesive dashboard pad is one-time use) .

-The suction cup may not compatible with the leather, vinyl and soft style dashboard. Recommend that to mount it on the windshield for stronger hold if your car’s dashboard surface is leather or vinyl or soft.

-Magnetic Mount Caution: This magnetic mount is not a toy. The small magnets are harmful if swallowed. Keep away from children.

Package includes:

1 x Suction cup magnetic car phone mount

2 x Metal plate (1 Rectangle,1 Rounded)

1 x Cat Shape Metal Plate

1 x Dashboard Pad

1 x Manual

• Best Viewing:The base is able to rotate through 360 degrees, and the adjustable arm and ball joint makes it easy to find the ideal phone viewing angle
• Reliable Adhesion: Fixes securely to a flat surface on your dashboard. Features an additional sticker base for slightly curved or uneven surfaces
• Magnetic Attachment: Four powerful magnets securely hold your phone or GPS on your car dashboard. Just grab and go when you reach your destination. Note that wireless charging will not work when a magnetic plate is attached to your device or placed inside its case
• Easy Setup: Included circular metal plate (for smaller phones) and rectangular metal plate (for larger phones) easily slip between your phone and case or can be safely adhered to the back of your phone
• Package Contents: AUKEY HD-C49 Car Magnetic Phone Mount, Sticker Base, Circular Metal Plate, Rectangular Metal Plate, User Manual

User questions & answers

Question:	Can you put the magnet in the case or adhere it to the case if you have credit cards in the case? As in using one of those phone case wallets
Answer:	It is recommended to adhere it to the case.
Question:	Can I attach the magnet to back of my phone case
Answer:	Attach directly to back of phone. The magnet will hold.
Question:	I found two metal plates for my phone in the package. One is round and smaller while another is rectangular and bigger. What's the difference of them
Answer:	If your phone is larger than 6 inches, you may want to use the rectangular one since it will provide more magnetic power..
Question:	It is possible to reposition the sticky base many times
Answer:	Not too many times. Yes you can remove it, wash it, and place it somewhere else but it is not as sticky. I don't recommend repositioning as mine lost the thick sticky piece due to moving and now the product is useless.

Product features

Stable & Flexible Mounting

Adhesive base with suction lock fixes securely to your dashboard. Release the lock to rotate the mount 360 degrees on the base.

Adjustable Arm

90-degree-adjustable arm keeps your phone accessible without blocking your view.

Comfortable Viewing

360-degree ball joint motion makes it easy to find the ideal phone viewing angle.

Installation

Stick the magnetic plate to the back of your phone (or place it inside your case under the phone) and attach your phone to the arm of the mount.

Noted: Wireless charging will not work when a magnetic plate is attached to your device or placed inside its case.

Step 1

Peel off the white backing on the bottom of the adhesive base and stick it to your dashboard.

Step 2

Lift up the lever on the phone mount and place it on top of the adhesive base.

Step 3

Press down the lever. The mount should now firmly grip the adhesive base.

• One holder for multiple purposes. More convenient, can be used in car dashboard, sun visor, rearview mirror.
• 360 Degree rotation ,Switch between horizontal and vertical screens at your will.
• Curved base design,Made with a soft,non-slip silicon pad and curved base. The phone holder can be attached to the cat dashboard or curved surface. and firmly hold your electric device order to prevent them from scratching and dropping.
• Spring buckle base can not be shaken off. Strong and sturdy.
• Broad Compatibility: designed with a spring buckle , which can be adjusted to fit mobile phones from 4 to 7 inches.

User questions & answers

Question:	Where is this product made
Answer:	I didn't check to see where it was made, buf that doesn't matter to me. I do like quality purchases though. This is a very strong and sturdy holder.
Question:	Will it fit the dash of a 2015 acura mdx
Answer:	Looking at your dashboard setup, it looks like it may be able to clip in the middle of your dashboard, but may block part of your view when you're driving. It may also clip behind your steering wheel.
Question:	Will it fit an iPhone SE 2020 with no case on it
Answer:	Yes it will. The height of the phone won’t matter. My iPhone 8 with case is 3inches. Your SE 2020 without case is 2.65inches. And there is room to spare.
Question:	Does this work after it’s exposed to the sun
Answer:	Mine does, even on the hottest of Southern California days it works just fine.

• 2020 Cup Phone Holder - The base can be adjusted from Min. 2. 3" to Max. 3. 3", fits most standard car cup holder, no need extra tools. Featuring one-button release curved arm and extendable feet, letting you can enjoy safe and the best viewing angle . Don't need to affix anything to your dash or window, just simply put it in your car cup holder and fix.
• ONE QUICK RELEASE BUTTON -Press button on below of the car holder to slide open and then take out mobile phone. Press the arms on both side to clamp mobile phone again, simple of operation. One locking lever for installing and removing the car mount. Featuring one-button release curved arm and extendable feet, they all with soft silicone pad. Let your phone without scratch.
• Never Shake & Stable Version - This new car cup phone holder is made with an adjustable heavy base and strong neck, which stops any shaking. A flexible swivel ball for 360° rotation and a jointed arm for 270° easy movement further enhance your view of the phone. It ensures safe driving whether you are talking, navigating, listening to music or charging.
• Universal Cell Phone Holder - Can be Extendable to 12. 6" Length, You could adjust different sizes to fit your various cup holders in car, truck, RV, boat, golf cart, etc patible with cell phones and devices between 2-4. 0 inches width (Support maximum 0. 99" thickness device, ). Fit iPhone 11 Pro/11 Pro Max/11/XR/XS Max/XS/X/8/8 Plus/7/7 Plus, Samsung Galaxy S10/S10 Plus/S9/S8 Edge/Note 9, LG, Google, Sony, Huawei phones, GPS devices and More.
• Drive Now Text Later-Safety first! Keep your hands on the steering wheel and your eyes on the road while conveniently using your phone's GPS navigation and hands-free features. You will worth try it if you have a car. It is the most reassuring choice to give this as a gift to someone you care about.

User questions & answers

Question:	S9+ w/Slim waterproof case? Can't find one that will fit. I've wasted a bunch of money on stupid phone holders that claim it will fit but does not
Answer:	It adjusts and fits my 2016 Honda Pilot cup holder.
Question:	will it fit Samsung adroit maxx
Answer:	I know it fits my Note 10+. It's easy to install and adjust. I am really impressed with it. Great price also.
Question:	Will this fit any vell phones
Answer:	The holder is adjustable for a variety of phones. I have an iPhone 11 Pro Max and it fits snug in the holder
Question:	Will this fit iPhone XR and equinox car
Answer:	It takes my wife's 7+, so I am sure it will fit the XR. My 2004 Chevy truck has large cup holders with rubber wings to catch the can or bottle. The phone holder expands to fit that large cup holder size.