6 best qimisi gel nail polish

Product description

pH Bond nail prep dehydrates the nail plate for optimal performance

.Foundation base gel creates an adhesive bond between nail and gel product

Long Lasting Shine Mirror Top Gel, Which Keeps The High Gloss From 14-40 Days For Different People If Applied Correctly. Strong Adhesive Performance Base Gel, Adhere To The Nail And The Color Gel Well; 

NATURAL EXTRACTED INGREDIENT -- Ingredient Of Purified Water, Extracted Natural Resin And Mineral Powder, No Harm To Skin And No Uncomfortable Smell. However, We Recommend You Do The Skin Test If Its Your First Time Use These Gels.

• Long Lasting Shine Mirror Top Gel, Which Keeps The High Gloss From 14-40 Days For Different People If Applied Correctly. Strong Adhesive Performance Base Gel, Adhere To The Nail And The Color Gel Well;
• pH Bond nail prep dehydrates the nail plate for optimal performance.Foundation base gel creates an adhesive bond between nail and gel product
• NATURAL EXTRACTED INGREDIENT -- Ingredient Of Purified Water, Extracted Natural Resin And Mineral Powder, No Harm To Skin And No Uncomfortable Smell. However, We Recommend You Do The Skin Test If Its Your First Time Use These Gels.
• Requires drying under UV or LED Lamp. Apply the polish in thin coat. Thinner - Stronger.
• NOTE: With gel nail polish, please always apply thin layer each time! Too much coat or gel on the skin might cause burning feeling when cure under UV/LED lamp. Please clean gel around nails prior curing as well! Try lower wattage lamp if you were sensitive to heat.

User questions & answers

Question:	Is this used with the dip powders
Answer:	No , this is for gel polish . Sherch "Dip polish" or "Dip Kit" . Yes , You CAN find the polish for dip sold by itself . Just sherch "Dip kits" . It will tell you it's for Dip . I have seen lots of them .

Product description

6 x 15 ml Poly Nail Gel 100 pcs Nail forms 1 x nail file 1 x Dual-ended nail pen (brush and spatula) 1 x solution 1 x base coat 1 x top coat Instruction： 1 Apply the base coat and cure with lamp for I mins. 2 Press the Poly Nail Gel into the nail form. 3 Use the brush to shape the extension gel with slip solution on the form. 4 Place the nail form on your nail (press with your finger if the nail form cannot place well). 5 Cure with lamp for 1-2 minutes. 6 Remove the nail form. 7 Use the file to shape your nail you need. 8 Apply the top coat and cure with lamp for 1 minutes.

• ALL-IN-ONE Poly Nail Gel Kit – Don’t envy others, you also can have beautiful nails with one Qimeisi Polygel Nail Kit. Qimeisi Poly Nail Gel nail kit includes the tools you need: 6 colors Poly Nail Gel, nail file, nail forms, Dual-ended nail brush and spatula, solution, base coat and top coat. NO LAMP.
• EASY TO USE – Qimeisi extension nail gel is dry fast, the curing time for the LED lamp is only 30s - 60s and UV Lamp is 2 mins. It's stronger, more flexible, easier to control than other nail extension.
• PERFECT FIT DIY - No troublesome appointment, and no need spend a lot of time to wait in salon. Qimeisi Poly Nail Gel is an easy-to-use extension nail gel, even for a beginner. You can shape nail form what you want, make French nail, stick diamond and so on.
• LONG-LASTING -- Qimeisi nail extension gel nails will last up to about one month or longer with proper nail prep (filing, buffering, and cleaning).

• Package included: Builder Base + No Wipe Top Coat
• Builder base can be used as Builder Gel & Base Coat & Nail Reinforce Lacquer. AIMEILI No Wipe Top Coat is used to seal all the color gel, and will dry with high-gloss finish result.
• 21 days high-gloss wear. Mirror shine finish. No Nicks, Chips or Smudges.
• Requires drying under UV or LED Lamp. NOTE: AIMEILI builder base is thick formula, please keep it away from stronger UV lighting, such as sunlight or working UV/LED lamp, otherwise it would be easily cured inside bottle.
• BEWARE: May cause ALLERGIC REACTION. Please take SKIN TEST EVERY TIME before doing manicure. Stop using immediately once feeling uncomfortable! Also, please DO NOT over file down the nail plates or scrap off old polish with a sharp tool! The trauma required to remove the gel nail polish is quite significant. Once it occurs, infection can set in and cause problems.

User questions & answers

Question:	Does it come with the mail former? Or do I need to buy separately
Answer:	Yes, it comes with a traveling size UV light with gel nail polish.
Question:	How do you remove this product from your nails? What happens when it grows out? Can you just fill in
Answer:	Dear Customer Yes,it's the same. LOYFUN Service Team
Question:	If I used the primer and builder base, should the base coat go before the builder or after? What’s the best way to prep the nails
Answer:	Yes

Product features

STEP 1

Trim and shape nails, then buff nails slightly, and wipe it down with some rubbing alcohol or acetone to remove any excess oil from your nails.

STEP 2

Wear a nail form.

STEP 3

Apply AIMEILI Builder Base to whole nail, and extend it a bit. Cure under UV lamp for 1-2 minute, LED light for 30-60 seconds.

STEP 4

Remove nail form

STEP 5

Apply AIMEILI Builder Base coat once again. Cure under UV lamp for 1-2 minute, LED light for 30-60 seconds.

STEP 6

Repeat Step 1, trim and shape nails, then buff nails slightly, and wipe it down with some rubbing alcohol or acetone to remove any excess oil from your nails.

STEP 7

Apply AIMEILI color coat and cure. Repeat it until opacity color achieved. Lastly, finish the manicure with AIMEILI No Wipe Top coat, and cure.

STEP 8

Enjoy your manicure!

Used as Builder Gel

Ideal to build a nail extension. Makes it easier to apply nail tips.

NOTE: AIMEILI builder base is thick formula, please keep it away from stronger UV lighting, such as sunlight or working UV/LED lamp, otherwise it would be easily cured inside bottle.

Used as Base Coat

Also, it could be used as base coat for normal manicure due to its adhesion.

NOTE: AIMEILI builder base is thick formula, please keep it away from stronger UV lighting, such as sunlight or working UV/LED lamp, otherwise it would be easily cured inside bottle.

Used as Nail Reinforce Lacquer

It would be available to do it as overlay for your manicure. Simple and easy to manipulate.

NOTE: AIMEILI builder base is thick formula, please keep it away from stronger UV lighting, such as sunlight or working UV/LED lamp, otherwise it would be easily cured inside bottle.

WHY CHOOSE AIMEILI NO WIPE TOP COAT

1. 21 days high-gloss wear.
2. On like polish, Wears like Gel, Off in minutes.
3. No Nicks, Chips or Smudges.
4. Goes on smooth, mirror shine finish, no need to wipe the top coat.

• REMINDER: Nail gel polish need cure under LED/UV light ,CURE TIME: Average for LED light 30-60 secs, UV light 2-4mins.
• Make sure the brush don't have too much gel polish on it if you don't want your nails to look so thick
• With a proper application, 2 WEEKS+ wearing is attainable.
• Environment-friendly products with healthy ingredients, low smell, NON-TOXIC
• Made from natural resin, wears like gel, good tenacity.

User questions & answers

Question:	How do i remove it? do i have to soak and wrap with foil. i would love to find gel polish that isn't so hard to remove
Answer:	Is not hard at all, in fact after two weeks I stated to peel it from the corner and it came out easy. But is strong and beautiful color.
Question:	Anyone's turn brownish/dingy color? I did it before i went to bed and woke up with it that color. Trying to determine if its the polish or my light
Answer:	No, wasnt dingy or brownish color at all. As a matter of fact, the color was perfect for 3 weeks until I removed it myself. Hope this helps.
Question:	Is this supposed to be sticky
Answer:	No shouldn’t be sticky. It’s a gel polish that needs to be cured under uv light. Hope this helps.
Question:	how long does the color last
Answer:	Mine has latest almost two weeks and still looks like the first day of application but I applied one top coat clear gel nail polish after the glitter gel nail polish (same brand) using Uv lamp

Product features

Milky White Gel Nail Polish

1. Remove the cuticle, trim the edge, polish your nails and make sure they are dry and clean.

2. Apply base coat - cure with LED or UV lamp. (UV lamp for 1 min, LED lamp for 30 secs) -It is normal for a base coat keep stick after curing.

3. Apply 1st thin coat of polish - cure. (UV lamp for 2 mins, LED lamp for 30-60 secs)

4. Apply 2nd thin coat of polish - cure. (UV lamp for 2 mins, LED lamp for 30-60 secs) -- Apply 3rd coat if necessary.

5. Apply no wipe top coat - cure. (UV lamp for 2 mins, LED lamp for 30-60 secs)

How to Remove?

1. Use a frosted strip to polish the Nail Top Coat

2. Apply enough MEMEDA nail remover and try to avoid applying it to the surrounding skin.

3. Wait 2-3 minutes, until the nail polish is completely burst

4. Push away the residual nail polish

5. Remove the gel nail polish

Not dry?

Please check the wattage of your lamp. Are you only curing for 30 seconds? We suggest: Base coat cured for 30 secs. Gel polish each coat - 60 secs. Top coat - 60 secs. Wipe with alcohol cotton ball.

Buyer show

1, The left style from the buyer. The milky white color suit for different occasion,

you can do the nail on Halloween Day, Chrismas Day with the holiday nail stickers or mix different color

2. The show will be different if you put different coats. You can put 1-2 coats if you want to clear,

you can put 3-4 coats if you want more opaque.

Top Coat

Gel Nail Polish Top Coat

Base Coat

Gel Nail Polish Base Coat

Glitter Top Coat

Gel Nail Polish Glitter Top Coat

Magic Remover

Gel Nail Polish Magic Remover

Product description

Directions

Step 1: Prep and push back cuticles.

Step 2: Apply AIMEILI Base coat, and cure under UV lamp for 1 minute, LED light for 30 seconds.

Step 3: Apply AIMEILI color in a thin application. Cure under UV lamp for 2 minutes, LED light for 30-60 seconds.

Step 4: Apply second coat, then cure under UV lamp for 2 minutes, LED light for 30-60 seconds. Apply third coat if neccessary.

Step 5: Apply AIMEILI No Wipe Top coat and cure under UV lamp for 2 mins, LED light for 30-60 seconds.

Step 6: Enjoy your 14 Day Manicure!

How to remove:

Step 1: File the top coat off.

Step 2: Soak cotton pad with acetone.

Step 3: Wrap around each nail tightly with tin foil, then leave for around 10 minutes or longer.

Step 4: Use an orange stick or a cuticle pushier to remove softened gel.

Tips:

1: Eco-friendly ingredients and slight nontoxic smell. The slight smell will fade away after curing.

2: Please DO NOT apply any gel on the skin/cuticle, or put the coats on too thick, or you might feel a burning while curing.

3: Please check the curing lamp regularly, avoiding using defective lamp.

4: Cover the edges to prevent peeling.

- May cause ALLERGIC REACTION. Please DISCONTINUE USING when you start feeling uncomfortable.

- Follow the directions for application and seal after using.

- Do not apply to nails that damaged or infected. Get the torn cuticles or hang nails healed up before applying.

- Go to doctor if in eyes or mouth.

ALLERGY ALERT:

BEFORE APPLYING ALWAYS TAKE A SKIN TEST WITH A DROP AND WAIT FOR MINUTES TO CHECK ANY ALLERGIES. Remove immediately if redness or other signs of adverse reaction occur.

• 21 days high-gloss wear. Mirror shine finish. No Nicks, Chips or Smudges.
• Requires drying under UV or LED Lamp. Apply the polish in thin coat. Thinner - Stronger. Please note: The smell of gel nail polish is unavoidable. After you have it dried, the smell will disappear.
• BEWARE: May cause ALLERGIC REACTION. Please take SKIN TEST EVERY TIME before doing manicure. Stop using immediately once feeling uncomfortable! Also, please DO NOT over file down the nail plates or scrap off old polish with a sharp tool! The trauma required to remove the gel nail polish is quite significant. Once it occurs, infection can set in and cause problems.
• Ingredients of BASE COAT: DI-HEMA TRIMETHYLHEXYL DICARBAMATE, HYDROXYPROPYL METHACRYLATE, HEMA, ISOBORNYL METHACRYLATE, HYDROXYCYCLOHEXYL PHENYL KETONE, VIOLET 2 (CI60725). Ingredients of TOP COAT: DI-HEMA TRIMETHYLHEXYL DICARBAMATE, HEMA, HYDROXYPROPYL METHACRYLATE, HYDROXYCYCLOHEXYL PHENYL KETONE, ETHYL TRIMETHYLBENZOYL PHENYLPHOSPHINATE, VIOLET 2
• NOTE: With gel nail polish, please always apply thin layer each time! Too much coat or gel on the skin, or using high wattage curing lamp might cause burning feeling when cure under UV/LED lamp. Please clean gel around nails prior curing as well! Try lower wattage lamp if you were sensitive to heat.

User questions & answers

Question:	Can I use these base and top coat with a regular nail polish
Answer:	Yep! Like a champ! It also cures polygel, gel polish and hard gel. Its definitely professional quality.
Question:	Will the colors of these nail polish match my pinsand cordking iphone 12 case
Answer:	Yes, it comes with the suitable US plug.
Question:	I've read some people say that I can buy the gel base and gel top coat, but use my regular polishes in between the two, how do I do this
Answer:	Gel is great for this yes, it works for both of them, the trick is all in the timer settings.
Question:	Sheep to Israel
Answer:	YES, this is an UV LED lamp.you can use this lamp with any gel polish.

Product description

Feature:



Ideal for creating your own beautiful nail art design on finger or toe nails



Suitable for using with other nail art products



Can be used on artificial nails as well as natural nails



The paints can be used on different surfaces such as nails, paper,and other artworks



Suitable for professional use or home use



How to use:



Step 1. Clean Nails then trim nail surface as normal manicure process



Step 2. Fully shake the bottle to mix the gel uniform



Step 3. Apply a thin coat of foundation (base coat) from the cuticle to the free edge (Remember to seal the edge of the nail). Cure the nails under the LED lamp for 10 seconds or a UV light for 2 minute



Step 4. Choose your color, apply a thin coat of the S-oak off Gel Polish from the cuticle to the free edge (Remember to seal the edge of the nail). Cure the nails under the LED lamp for 30 seconds or a UV light for 2 minutes



Step 5. Repeat the 2nd thin coat of the s-oak off Gel Polish to the nails. Cure under the LED lamp for 30 seconds or a UV light for 2 minutes



Step 6. Coat with no wipe top coat (Remember to seal the edge of the nail), Cure the nails under the LED lamp for 30 seconds or a UV light for 2 minutes



Feature:



Colour:Multicolor



Net Weight: Each Color 0.27oz/8ml



Gross Weight:185g/0.41lb



To Remove:



1. S-oak off the nails into acrylic remover for about 5 minutes



2. Rip down the whole piece of nail enamel gently on each nail



Package Content:



1 x Gel Nail Polish Set

• 🎁 Ideal for creating your own beautiful nail art design on finger or toe nails
• 🎁 Suitable for using with other nail art products
• 🎁 Can be used on artificial nails as well as natural nails. The paints can be used on different surfaces such as nails, paper,and other artworks
• 🎁 Suitable for professional use or home use
• 🎁 Shipping & Service: US stock, delivery within 9 days. If you had received any damage or defect, please contact us immediately. We will provide you with refund or re-send quality products. Guarantee you will be 100% satisfied.