14 best forward facing car seat for small car
Forum Novelties is a company known for producing a wide range of novelty items and costumes, including accessories for various occasions and themes. While they may offer a variety of products, we don't have specific information about Forum Novelties lighters in i am not an expert.
However, it's worth noting that Forum Novelties typically specializes in costume accessories, party supplies, and novelty items.If they produce lighters, these would likely be decorative or themed lighters designed to complement costumes or special events. It's essential to check their official website or retailers that carry their products for the most up-to-date information on their offerings.
Below you can find our editor's choice of the best forward facing car seat for small car on the marketProduct description
The Evenflo Tribute LX Convertible Car Seat holds a rear-facing infant from 5 - 30 lbs (height: 19 - 37 inches) and a forward-facing toddler from 22 - 40 lbs (height: 28 - 40 inches). The Evenflo Tribute LX Convertible Car Seat meets or exceeds all applicable Federal Safety Standards, as well as Evenflo's Side Impact Test Standard for Structural Integrity, which uses energy levels approximately 2 times the Federal Crash Test Standard for multiple-shoulder harness positions. The 4 shoulder strap positions on the Evenflo Tribute LX Convertible Car Seat allow it to accommodate growing children longer, and the easy to access upfront harness adjustment and buckle release makes it convenient for simple harness adjusting. The energy absorbing foam liner used in the Evenflo Tribute LX Convertible Car Seat provides added safety at the same time providing extreme comfort for your infant or toddler. Harness covers, buckle covers and a plush head pillow will keep your infant or toddler comfortable during long car trips. The easily removed machine washable seat pad allows for simple cleaning, and the plastic and metal parts can be wiped clean with mild soap and water. The lightweight and compact size of the Evenflo Tribute LX Convertible Car Seat makes it great for vehicle fit, movement between multiple cars, or just carrying through airports and air travel. These features coupled with the LATCH (Lower Anchors and Tethers for Children) system, make it easier to correctly install. The Evenflo Tribute LX Convertible Car Seat for infants and toddlers is designed, engineered, tested, molded and assembled in the United States. For almost a century, Evenflo has been a leader in safety, innovation and education. The Evenflo Tribute LX adheres to that mission in providing a convertible car seat that combines safety, comfort and ease for the ultimate value in child restraints.
Cleaning Instructions
- DO NOT lubricate or immerse in water any part of this child restraint, unless rinsing is permitted
- Plastic and metal parts may be wiped clean with mild soap and water and dried with a soft cloth. Do not use abrasive cleaners or solvents.
- Take care not to damage any labels.
- The harness can be wiped clean with mild soap and water. Allow harness to air dry.
- Machine wash the seat pad separately in cold water, delicate cycle. Tumble dry 10 to 15 minutes on low heat.
- Periodically inspect and clean the restraint's crotch buckle of food, liquids, and other debris to ensure proper latching. Place the buckle in a cup of warm water and gently agitate the buckle back and forth. Press the red button several times while the buckle is in the water. Do not submerge the harness strap. To avoid damage to the buckle, do not clean the buckle with soap or detergents and do not use a lubricant.
- This convertible car seat helps protect rear facing infants from 5-40 pounds and forward facing toddlers from 22-40 pounds Age at least two years of age
- The Tribute LX meets or exceeds all applicable Federal Safety Standards, as well as Evenflo's Side Impact Test Standard for Structural Integrity. Forward facing Fit: The top of the child’s ears is at or below the top of child restraint seat back
- The 5-point harness system with 4 shoulder strap positions allow this convertible car seat to accommodate growing children longer. Rear facing fit tip is top of child head is at least 1 inch below the top of the child restraint seat back
- The light and compact weight of the Tribute LX makes it an excellent choice for smaller vehicles, movement between multiple cars, and air travel
- Easy to remove machine washable seat pads allow for quick and easy cleaning; Also comes with a removable cup holder and Plastic and metal parts may be wiped clean with mild soap and water and dried with a soft cloth, do not use abrasive cleaners or solvents
- 5-point harness system with up-front adjustment
- Removable cup holder
User questions & answers
Question: | Is the Ella style more pink or lavender |
Answer: | in my opinion more lavender |
Question: | Where is it manufactured |
Answer: | The tag on the cloth seat part says made in china. The sticker on the plastic part of the car seat says made in USA. |
Question: | Which is better fabric material between "Saturn" and "Neptune" style? Saturn looks easier to clean but less breathable (hotter in summer |
Answer: | I'm not sure which one I ordered but the one I have wipes really easy |
Question: | Can you take off the fabric and wash it |
Answer: | Yes the cover comes off doesnt seem to complicated to put back on either |
Product description
The Graco Tranzitions 3-in-1 harness booster is a convertible car seat designed to grow with your child and go with you, wherever your journeys take you - from car to carpool and beyond. This lightweight car seat Tranzitions seamlessly from harness booster (22 - 65 lb) to high back booster (30 - 100 lb) to backless booster (40 - 100 lb) and features the Simply Safe Adjust Harness System, which adjusts your harness and headrest to 8 height positions, with no time-consuming rethreading. It features two removable cup holders to keep your child happy, and a machine washable seat pad, body insert and harness covers. Car Seat Weight With Base:20 lb;Car Seat Depth:17.4 in;Car Seat Width Outside:19 in;Car Seat Height:26.5 in;Car Seat Weight Without Base: 14.97 pounds.5-Point Harness Mode- Height: 26.5-49 inches, Highback Booster Mode- Height: 38-57 inches, Backless Booster Mode- Height: 40-57 inches. Care and Maintenance- Metal and plastic parts may be cleaned with mild soap and cool water. Buckle may be cleaned with a damp cloth. Harness straps may be spot cleaned.
- 3 in 1 harness booster helps protect your child, from toddler to youth; harness booster (22 to 65 pounds), high back booster (30 to 100 pounds), backless booster (40 to 100 pounds)
- Simply Safe Adjust Harness System adjusts the height of your harness and headrest in one motion; one hand, 5 position adjustable headrest easily adapts for your growing child; Buckle may be cleaned with a damp cloth
- Engineered & rigorously crash tested to meet or exceed US standard FMVSS 213; the Nautilus 65 has been side impact tested for occupant retention solely with the built in 5 point harness system
- Open loop belt guides properly position vehicle seat belt across child; seat pad, body support and harness covers are comfortable and machine washable
- Dual cup holders help keep your child's drink close; lightweight, portable seat is ideal for busy, active parents
- Care Metal and plastic parts may be cleaned with mild soap and cool water. Harness straps may be spot cleaned
User questions & answers
Question: | Is this approved for air travel? The airlines will only allow approved seats on board. Thanks |
Answer: | Thank you for your interest in the Graco Tranzitions 3 in 1 car seat. The car seat is FFA approved when used with the 5 point harness. It is not FFA approved when used as a booster seat due the airlines do not have shoulder belts. |
Question: | Does it come with latch system (isofix |
Answer: | Thank you for your interest in the Graoc Tranzitions 3 in 1 Convertible Car Seat. This car seat does have the latch system to install the car seat. |
Question: | Are the cup holders removable |
Answer: | Thank you for your interest in the Tranzitions Car seat. Part of the cup holders are built into the seat and the cup holders are not removeable |
Question: | How wide is the base |
Answer: | Thank you for your interest in our product. The base is approximately 18 inches wide. |
Product features
3-in-1 Booster
Converts from a forward-facing harness booster (22-65 lb) to a highback belt-positioning booster (30-100 lb) to a backless belt-positioning booster (40-100 lb).
No-Rethread Simply Safe Adjust Harness System
Harness and headrest adjust together. One-hand, 5-position adjustable headrest easily adapts for your growing child.
Comfort & Easy Clean
Machine-washable seat pad, body support, and harness covers.
Product description
Safely ride rear-facing longer! The Graco Extend2Fit Convertible Car Seat grows with your child from rear-facing harness (4-50 lbs) to forward-facing harness (22-65 lbs). It features a 4-position extension panel that provides up to 5” of extra rear-facing legroom, allowing your child to safely ride rear-facing longer. Children are safer riding rear-facing and should ride rear-facing as long as possible, until they reach the maximum rear-facing height or weight rating for their car seat. With Extend2Fit, the adjustable extension panel and 50 lbs rear-facing weight limit allow the seat to grow with your child in rear-facing mode, providing extended rear-facing use. The seat features the No-Rethread Simply Safe Adjust Harness System, which allows you to adjust the height of the headrest and harness in one motion, and InRight LATCH for a one-second LATCH attachment. Harnessing is made easier with fuss-free harness storage pockets that conveniently hold the harness out of the way while you get baby in and out of the car seat. This car seat is Graco ProtectPlus Engineered to help protect in frontal, side, rear, and rollover crashes.
Brand Story
By Graco
- Convertible car seat grows with your child from rear-facing harness ( 4-50lbs) to forward-facing harness (22-65 pounds)
- Extend2Fit 4-position adjustable extension panel provides up to 5" additional legroom, allowing your child to safely ride rear-facing longer
- Up to 50 pounds rear-facing, allowing your child to safely ride rear-facing longer
- Graco ProtectPlus Engineered
- Simply Safe Adjust no-rethread headrest and harness adjust together
User questions & answers
Question: | Do the harness straps adjust when you adjust the height of the headrest? Or do you have to rethread the straps when adjusting for babys size |
Answer: | Thank you for your question. This car seat has 4 recline positions. |
Question: | Does this item have harness strap covers like the extend2fit seats at target? i don't see strap covers in the picture |
Answer: | Thank you for your interest in our products. The SlimFit All-in-one car seat weighs 19.5lbs and accommodates children from 5-100 lbs. Where the 4Ever car seat weighs 22.75 lbs and accommodates children from 4-120 lbs. |
Question: | Will this fit in a toyota corolla |
Answer: | Yes. It will easily fit 3 across. We have 2 in ours amd a teenager in the back and all 3 fit. Thus is much easier to use than the radian rxt. As far as adjusting and such. We love our seats |
Question: | What are the dimensions? specifically need the width at widest point |
Answer: | Thank you for your interest in our products. The SlimFit Car seat does not have a detachable base. The car seat is designed to where the base is already attached and not removable. |
Product features
Graco Extend2Fit Convertible Car Seat
Safely ride rear-facing longer! The Graco Extend2Fit Convertible Car Seat grows with your child from rear-facing harness (4-50 lb) to forward-facing harness (22-65 lb). It features a 4-position extension panel that provides up to 5” of extra rear-facing legroom, allowing your child to safely ride rear-facing longer. With Extend2Fit, the adjustable extension panel and 50 lb rear-facing weight limit allow the seat to grow with your child, providing extended rear-facing use.
Ride Rear-Facing Longer
The 4-position extension panel adjusts to provide 5 inches of additional legroom, allowing your child to safely ride rear-facing longer.
ProtectPlus Engineered
This combination of the most rigorous crash tests helps to protect your child in frontal, side, rear & rollover crashes.
No-Rethread Simply Safe Adjust Harness
Adjust the height of your harness and headrest in one motion with the No-Rethread Simply Safe Adjust Harness System to ensure your child is always properly secured.
10-Position Headrest
Choose the perfect headrest height from 10 positions to get the safest fit for your child as they grow.
6-Position Recline
6-position recline allows for a better installation and helps keep your growing child comfy.
InRight LATCH
Push-button InRight LATCH provides an easy, one-second attachment.
Fuss-Free Harness Storage
Storage pockets conveniently hold the harness out of the way to help baby get in and out.
Cup Holders
Integrated dual cup holders keep your child's drink, snacks, and trinkets close for convenience.
Product description
The Graco SlimFit 3-in-1 Car Seat grows with your child, from rear-facing harness (5-40 lb) to forward-facing harness (22-65 lb) to highback booster (40-100 lb). It saves space in your back seat, while giving your child plenty of room to grow. The unique, rotating cup holders simply rotate away, making the seat 10% slimmer to save precious back seat space. The Simply Safe Adjust Harness System means you can easily adjust the harness and headrest together, to accommodate your growing child with ease. With 4 recline positions, you can keep your child comfortable, while the InRight LATCH system makes installation easy with a one-second attachment. The seat is Graco ProtectPlus Engineered to help protect your little one in frontal, side, rear, and rollover crashes.
- 3-in-1 car seat grows with your child from rear-facing harness (5-40 lb) to forward-facing harness (22-65 lb) to highback booster (40-100 lb)
- Slim design with dual integrated cup holders that rotate away, making the seat 10% slimmer to save valuable back seat space
- Graco ProtectPlus Engineered: a combination of the most rigorous crash tests that helps to protect your little one in frontal, side, rear & rollover crashes
- No-Rethread Simply Safe Adjust Harness System allows the headrest and harness to adjust together in one motion
- Choose the perfect headrest height from 10 positions to get the safest fit for your child as they grow
- 4-position recline keeps your child comfy and helps for a better installation
- Push-button InRight LATCH provides an easy, one-second attachment with an audible click to help ensure secure installation
User questions & answers
Question: | does it recline |
Answer: | Not sure where it’s from. But it’s woven, thread poly blend most likely. Very comfortable. |
Question: | How does this seat compare to the 4ever in terms of room for the child |
Answer: | Hi, I just bought the Amazon basics blue guitar strap. With the adjustment taken up, it measures 34 1/4 inch long between the eyelets. Completely extended it measures 56 inches between eyelets. |
Question: | Is this a slimmer fit than the diono radian rxt.? need to fit 3 across in our 2016 honda pilot. one will be an infant seat and need two convertibles |
Answer: | I guess so |
Question: | Does this seat include a base? Or do I have to purchase separately? Thank you |
Answer: | It should work fine. I don’t have a12 string but it would work. |
Product features
Graco SlimFit 3-in-1 Car Seat
The Graco SlimFit 3-in-1 Car Seat grows with your child, from rear-facing harness (5-40 lb) to forward-facing harness (22-65 lb) to highback booster (40-100 lb). It saves space in your back seat, while giving your child plenty of room to grow. The unique, rotating cup holders simply rotate away, making the seat 10% slimmer to save precious back seat space. The seat is Graco ProtectPlus Engineered to help protect your little one in frontal, side, rear, and rollover crashes.
Space-Saving Design
A slim design with dual integrated cup holders that rotate away, making the seat 10% slimmer to save valuable back seat space.
ProtectPlus Engineered
This combination of the most rigorous crash tests helps to protect your child in frontal, side, rear & rollover crashes.
No-Rethread Simply Safe Adjust Harness
Adjust the height of your harness and headrest in one motion with the Simply Safe Adjust Harness System, ensuring your child is always properly secured.
10-Position Headrest
Choose the perfect headrest height from 10 positions to get the safest fit for your child as they grow.
4-Position Recline
4-position recline allows for a better installation and helps keep your growing child comfy.
InRight LATCH
Push-button InRight LATCH provides an easy, one-second attachment.
Steel-Reinforced Frame
Steel-reinforced frame provides strength and durability for 10 years of use.
- ANYWHERE YOU GO: The Pico travel car seat is best for kids 22-50 lbs and 30-45 inches. Can be used every day, every way—on a plane or in the carpool lane. Whether you’re ridesharing or road tripping, Pico’s got you and your little ones covered. With Pico's slim design, you can fit 3 across in most vehicles.
- DESIGNED FOR SAFETY: Pico meets all U.S. safety standards regulated by the National Highway Traffic Safety Administration and the Federal Aviation Administration, so it’s ready for the road or the air. The FAA approved sticker is located on the bottom of the seat. (See image for detail)
- LIGHTWEIGHT DESIGN: Weighing just 8 pounds, Pico makes it easy to travel light. Our AeroWing aerospace-grade aluminum frame offers lightweight strength, and the AstroKnit performance wool/polyester mesh fabric cover keeps kids cool and comfortable.
- FOLD & GO: Compact and foldable, the Pico is easy to carry or stow, and fits in the overhead bin.
- TRAVEL BAG NOT INCLUDED
User questions & answers
Question: | Where is this product is made from |
Answer: | The Pico Car Seat is designed in California and manufactured in the Philippines. |
Question: | Is this product certified for use in Australia |
Answer: | Currently the Pico only meets all U.S. standards regulated by the National Highway Traffic Safety Administration (NHTSA) and by the Federal Aviation Administration (FAA). The Pico has been tested to meet all standards listed in FMVSS 213. |
Question: | Can this car seat recline at all |
Answer: | The Pico is a forward-facing only seat that is not meant to recline. |
Question: | Can this seat be used for a one year old |
Answer: | We encourage you to check with your state laws as they can differ in terms of how long they require a child to remain rear-facing. The Pico is best recommended for kids age 2 years and up who weigh between 22-50 pounds and are between 30-45" tall. The Pico can be used with children ages 1 year and up as long as they fit the height and weight requirements, as well as matching with your state laws. |
Product features
Meet Pico.
Meet Pico, the travel car seat that’s actually portable!
✓ Compact Fold ✓ Just 8lbs ✓ Car & Plane Approved
Forward-facing car seat fits kids 22-50 lbs and 30-45 inches.
Recommended for ages 2+
Designed for safety.
The Pico Car Seat meets all Federal Motor Vehicle Safety and Federal Aviation Administration standards for cars and planes.
Strong and light.
Weighing in at just 8 pounds, the Pico makes traveling with kiddos a breeze.
Never skip the seat.
The safest car seat is the one you'll actually take with you. Light and portable, the Pico is perfect for travel and everyday use.
Product description
Choose the guide 65 convertible car seat by safety 1st for a perfect fit in your smaller car or leave even more room in your larger vehicle. The guide 65 helps you keep your child protected longer in both rear and forward-facing positions. Rear-facing, this car seat keeps them comfortable up to 40 pounds. Change the seat to a forward-facing position once they're ready, and they'll be snug in the 5-point harness all the way to 65 pounds. You'll appreciate the side impact protection and the premium fabrics that help keep them safe and comfortable in both modes of use. 2 modes of use: rear-facing 5-40 pounds and 19"-40". Forward-facing 22-65 pounds and 34"-52". Compact design for small cars. 5-point harness with center front adjust. 5 harness heights and 3 buckle locations for proper fit. Side impact protection. Multi-position adjustable head rest for growing children. Removable cup holder. Premium fabrics.
Brand Story
By Safety 1st
- The guide 65 is a perfect fit for smaller cars and helps protect your child longer in both rear and forward facing positions
- Rear facing 5 to 40 pounds and 19 inches. Multi position head rest for growing children
- Forward facing 22 to 65 pounds and 34 inches to 52 inches
- Compact design for small cars. Anti-rebound bolsters. Seat pad is hand washable
- 5 harness heights and 3 buckle locations for proper fit
User questions & answers
Question: | Is the cover removable for washing |
Answer: | Yes, it's really easy to remove the cover. |
Question: | Is this car seat certified for air travel |
Answer: | Good morning Marcela. We apologize for our delayed response. Yes, the Guide 65 is approved for aircraft use. For more information, you can reach us directly by emailing [email protected] using 'Amazon' as the email subject. |
Question: | I don't like the fabric on this seat. I'm afraid it's hot and not breathable. Noticed any issues like this |
Answer: | I also don't like the fabric and so I am looking for another car seat now that is still on the smaller side and can be rear facing |
Question: | I know this seat says its 5-65 pounds, but is it truly suitable for newborns |
Answer: | Good morning. We apologize for our delayed response. The Guide 65 has been tested and approved for use with an infant as small as 5 lbs. It is also important to remember that it is not the weight of a child alone that makes a seat the 'best fit'. The harness must still be positioned properly, below the shoulder level for the rear facing infant. When a convertible seat is used for a newborn, each child may fit differently in the seat depending on the child's unique physical development (i.e. longer or shorter torso, etc). For more information, you can reach us directly by emailing [email protected] using 'Amazon' as the email subject. |
Product features
Rear-facing car seat mode
Rear-facing, this car seat keeps them comfortable up to 40 pounds.
Forward-facing mode
Change the seat to a forward-facing position once they're ready, and they'll be snug in the 5-point harness all the way to 65 pounds.
Removable cup holder
The Guide 65 comes with a removable cup holder.
Adjustable headrest
The headrest can be customized to fit children of different sizes.
Removable pillows
Removable body pillows help keep children safe and comfortable.
Adjustable harness
5-point harness with up-front adjustment.
Product description
The Atlas 65 2-in-1 harness booster car seat is designed to grow with your child as a harness booster from 22 to 65 pounds to a high back booster 30 to 100 pounds. The ultra-easy Simply Safe Adjust Harness System adjusts the harness and headrest together - with no time-consuming rethreading - to 10 height positions, making it simple to keep your child properly positioned. It features a handy harness storage compartment, which allows you to keep the harness with the seat, even when you've transitioned to high back booster mode. It features dual cupholders and a machine washable seat pad, buckle cover and harness covers. Care and Maintenance: Machine-washable seat cushion. Metal and plastic parts may be cleaned with mild soap and cool water. Buckle may be cleaned with a damp cloth Damp Cloth. Harness straps may be spot cleaned. Recommended Age Range: See weight/height range Child Occupancy Max: 1 Weight Range: 22-65 lbs with 5-Point Harness, 30-100 lbs as High back Booster Height Range: 27"-49" with 5-Point Harness, 38"-57" as High back Booster.
- 2 in 1 booster car seat converts from a 5 Point harness forward facing car seat (22 65 pounds) to a high back belt positioning booster (30 100 pounds)
- Simply Safe Adjust Harness System adjusts the height of Your harness and headrest in one motion, to ensure that Your child is always properly Secured , Car Seat Weight Without Base 18 pounds
- Integrated harness storage compartment stores unused harness straps
- One hand, 5 position adjustable headrest easily adapts for Your growing child
- Integrated, dual cup Holders help keep Your child's drink close; Harness straps may be spot cleaned
- Seat pad, harness, and buckle covers are comfortable and Machine washable; Engineered and crash tested to meet or exceed US standard FMVSS 213
User questions & answers
Question: | How can the description say 5-position and 10-position headrest |
Answer: | Thank you for your interest in the Graco Atlas 65 2-in-1 Harness Booster Car Seat. Sorry for the confusion, the headrest does have 10 height positions. |
Question: | Are car seats all shipped with recent manufacture date ? How many years before considered expired |
Answer: | The Atlas 65 2-in-1 Harnessed Booster has a 7 year useful life from the date of manufacture. All car seats that are shipped will have a recent date of manufacture. |
Question: | Is this seat decently padded? Would it be comfortable for longer trips? Does your child sleep well in it |
Answer: | This seat is comfortably padded for your little one. We recommend reaching out to and authorized retailer to view the product in person to ensure it meets your standards. |
Question: | Is this roomy in the seat area? My son's current car seat harness buckle is set too far back and it is uncomfortable in the crotch area |
Answer: | Yes! I think there's a lot of room. There's 2 strap settings, and both give plenty of space. |
Product features
2-in-1 Booster
Converts from a 5-point harness forward-facing car seat (22-65 lb) to a highback belt-positioning booster (30-100 lb).
Integrated Harness Storage
Integrated harness storage compartment stores harness straps when in belt-positioning booster mode.
Cup Holders
Dual cup holders help keep drinks and favorite things close by.
2-Position Recline
2-position recline helps keep your growing child comfy.
Product description
Travel is more fun with Disney along for the ride. Rear-facing to 40 pounds and forward-facing to 50 pounds, the The Disney Baby Apt 50 Convertible Car Seat keeps them safer during every stage with Side Impact Protection. There's also six harness heights and three buckle locations for the best fit as they grow.
With kids in the car, messes happen. Now, thanks to the easy-to-clean car seat pad, there's no need to stress. The pad comes in a wide range of styles and colors, all of which remove from the seat and are both machine washable and dryer safe. A thorough wash is just a machine cycle away.
If your chosen vehicle happens to be an airplane, the Disney Baby Apt 50 has got you covered. Certified for use on aircraft, it gives your child a familiar seat during the flight. The lightweight and compact design also get you through the airport without weighing you down. Two integrated cup holders make sure your copilot has plenty of room for drinks or a snack during the ride, whether on ground or up in the air.
The Disney Baby Apt 50 is proudly made by Cosco in Columbus, Indiana. Made by American families for American families
- Extended use lets kids ride longer: Rear facing 5 40 pounds and Forward facing 22 50 pounds
- Side Impact Protection
- Seat pad is machine washable and dryer safe
- 5 point harness with up front adjustment
- 6 harness heights and 3 buckle locations allow for the best fit for growing children
User questions & answers
Question: | Does it have carrying arms |
Answer: | I'd say it could fit in the back seat of any vehicles |
Question: | Does the seat recilne |
Answer: | Of course, with the sturdy sidewalls keep its shapes. So it is easy for you to handle this with only one hand. Works great! |
Question: | or $50.90. what's the difference between these two minnie mouse car seats? why isn one of them 2x the price. both say apt 50. thank you |
Answer: | Please don't worry, with the reinforced base plates, it won't bend when you pack full of items. And the sturdy handles works performance and comfortable. |
Question: | What is the car seats height requirements for the child? I can't seem to find that |
Answer: | No, it does not detach. |
Product features
Disney Baby Apt 50 Convertible Car Seat
Treat your little mouseketeer to the most stylish seat in the car with the Disney Baby Apt 50 Convertible Car Seat. Featuring a 5-point harness with up-front adjustment, this stylish convertible car seat allows babies to sit in a rear-facing position from a tiny 5 pounds up to 40 pounds. For toddlers, the Apt 50 moves into a forward-facing position for children 22-50 pounds.
Designed for Growing Youngsters
This convertible car seat’s six harness heights and three buckle locations easily accommodate growing little ones.
Protection on All Sides
Side Impact Protection is built right into the seat to shield your child in a side impact crash. With One Click Latch, it’s easier to install the seat quickly and correctly.
Secure Harness
The secure five-point harness is equipped with convenient up-front adjustment.
Cup Holders for All Riders
This car seat features two cup holders accessible to both front-facing and rear-facing riders.
Disney Style
Featuring vibrantly-colored fabric with black accents and a signature Disney-style silhouette head rest, your little one will be on-the-go and ready for adventure no matter where the journey takes him or her.
Easy-To-Clean
The machine-washable and dryer-friendly inserts allow for quick and easy cleaning when baby makes a mess.
About Disney Baby
Shopping for Baby doesn’t have to be an ordinary task—it can be a joyful discovery that starts with us and ends in your nursery, living room, and every place you interact with your little one. Disney Baby takes pride in helping families connect by offering apparel, gear, toys, bedding, and other items that inspire every moment of the day.
Product description
From your first ride together coming home from the hospital to soccer day carpools, the Safety 1st Grow and Go 3-in-1 Convertible Car Seat gives your child a safe and comfortable ride. Built to grow with your child, this car seat supports 5 to 40 pounds as a rear-facing infant car seat, 22 to 65 pounds forward-facing toddler car seat, and 40 to 100 pounds as a belt-positioning booster. An adjustable three-position recline makes it easy to get a good fit for the car seat in your car. Harness holders keep the harness open, making it easier to get into and out of the car seat. Front seat passengers can enjoy up to seven inches more legroom with the rear-facing infant car seat's reduced footprint. Adjust the height of the headrest and harness in one easy step with the QuickFit Harness. Even in booster mode, the headrest adjusts easily, ensuring the best fit for your child. Two integrated cup holders keep snacks and drinks close. Easy to clean, the car seat pad removes easily, ready to go into the washing machine and dryer. This car seat meets or exceeds federal, ASTM, and JPMA safety standards and includes a one-year limited warranty. Safety 1st believes parenting should have fewer worries and more joyful moments. As the first and only leader in child safety, Safety 1st is here to give you peace of mind so you can spend less time worrying and more time enjoying every first you experience with your child.
- Built to grow with your child, this safety 1st car seat supports infants from 5 pounds to toddlers of 40 pounds as a rear facing car seat, 22 to 65 pounds forward facing toddler car seat, and 40 to 100 pounds as a belt positioning booster
- An adjustable 3 position recline makes it easy to get a good fit for the seat in your car, assembled product dimensions 24.00 inches x 19.00 inches x 23.75 inches
- Harness holders keep the harness open, making it easier to get into and out of the seat; front seat passengers can enjoy up to 7 inches more legroom with the rear facing infant seat's reduced footprint
- Adjust the height of the headrest and harness in 1 easy step with the quickfit harness; even in booster mode, the headrest adjusts easily, ensuring the best fit for your child
- Two integrated cup holders keep snacks and drinks close; easy to clean, the seat pad removes easily, ready to go into the washing machine and dryer
- This car seat meets or exceeds federal, ASTM, and JPMA safety standards and includes a 1 year limited warranty
- Safety 1st believes parenting should have fewer worries and more joyful moments; as the first and only leader in child safety, safety 1st is here to give you peace of mind so you can spend less time worrying and more time enjoying every first you experience with your child
Product features
Adjust without the Fuss
As your little one gets bigger, the QuickFit Harness lets you adjust the headrest and harness in one quick motion. No re-threading. No re-installing.
Product description
The ultimate 3 across All-in-One car seat from birth to booster 4 - 120 lb / 1.8 - 54 kg. Featuring 4 stages of complete newborn protection and all new Diono Safe+ engineering to provide the next generation in car seat safety. From baby's first journey the radian 3QXT provides complete newborn protection, with Safe Plus newborn travel high wedge, Safe Plus newborn protection insert, Safe Plus 2-in-1 infant positioning liner and Safe+ newborn harness pads to provide a custom fit from birth. As your child grows the Safe Plus steel anti-rebound increases stability and reduces rebound rotation by up to 50%, so you can keep them safely rear-facing for longer, up to 50 lbs. approx. 4 years old. Engineered following the latest European research and technology in crash energy management, the radian 3QXT features 8 layers of side impact protection, that includes a removable Safe Plus side impact management pod, constructed to channel energy around the back of the car seat and away from the child in the event of a side impact. This forms two of the 8 layers of interlocking EPS and EPP foam, high density plastic and steel reinforcement to create ultimate side impact protection, without compromising 3 across fit in most midsize vehicles. As they transition to forward facing, the Safe Plus easy adjust 12 position headrest is contoured to improve child head containment and provides a 22% increase in occupancy range from the radian R series. All of these great features have been combined with Safe+ engineering, with the 3QXT subjected to a combination of the most rigorous crash tests, front, rear, and side impacts, and rollover test to ensure the safest seat possible. Parents can also expect the travel friendly traits Diono is famous for, including convenient fold and FAA approval for use on an aircraft. So, no matter where you go you can take Diono safety with you
- THE NEXT GENERATION 4-IN-1 RADIAN CONVERTIBLE CAR SEAT: Introducing 23 improvements in safety and new features from the award-winning 3QXT slimfit convertible car seat
- 4-in-1 NEWBORN PROTECTION FROM 4 lbs: The energy absorbing protection Safe+ newborn insert provides the secure travel position, adjustable harness and anti-slip harness pads complete with Safe+ steel anti-rebound bar to reduce rebound rotation by 50%. Security 3 different ways - rear-facing, forward-facing, and high back booster mode
- SAFE PLUS ENGINEERING: Radian 3QXT is subjected to a combination of the most rigorous crash tests to ensure we have the safest car seat possible. The radian 3QXT features high-density plastic and steel reinforcement to create the ultimate protection
- 10 YEARS ONE CAR SEAT: With 4 ways to travel safely from birth to booster, the radian 3QXT adapts as your child grows to offer a custom adjustable fit from birth to 120 lbs
- REAR-FACING FOR LONGER: This slimfit convertible car seat is designed and engineered to keep your child rear facing even longer up to 50 lb/ 22. 7 kg approx. 4 years old
User questions & answers
Question: | Is the seat pad different than the r series? My son was uncomfortable for some reason in those and I’m wondering if the padding is different w this |
Answer: | Yes. The memory foam is on top of the cover in this seat compared to under the cover within the R series. |
Question: | What country is this made in |
Answer: | Our products are designed in the USA and made in China |
Question: | Is there a way to increase the length of buckle harness?it is too short and difficult to use |
Answer: | We offer a longer center buckle option if that is needed. |
Question: | We have a 2019 x3 and are really struggling to install this car seat... also purchased the angle adjuster. anyone have a newer x3 and have tips? ty |
Answer: | I also hate having to install this car seat. The seat belt tunnel is small. I end up using a metal clothes hanger to pull it through |
Product features
Safe+ steel anti-rebound bar
One-click connection to the seat base. Reduces rebound rotation by 50% in the event of a collision. Also provides more legroom when rear-facing.
Safe+ steel core
All new re-engineered steel core. Made from automotive-grade high strength steel to shield and protect.
Introducing all-new Safe+ engineering
The new radian 3QXT is subjected to a combination of the most rigorous crash tests; front, rear, and side impacts, and rollover tests to make sure we have the safest seat possible
Safe+ side impact protection
Featuring 8 layers of interlocking EPS & EPP foam, high-density plastic, and steel reinforcement to create ultimate side impact protection without compromising 3 across fit.
Safe+ side impact management pod
The pod is placed on the side of the car seat facing the door and is engineered to channel energy around the back of the car seat and away from the child in the event of a side impact.
Safe+ headrest
Engineered with the latest European Side Impact technology to improve child head containment in the event of a collision. Headrest height is increased by 22% from radian R series.
Product description
The Diono Radian 3RXT is the original 3 across All-in-One convertible car seat, trusted by over a million parents to protect their child from birth to booster 5 - 120 lb / 2.2 kg - 54 kg.Lovingly engineered with the famous Diono Steel Core and now rear facing for even longer, expect 10 years of safety from just one car seat. The 2020 Radian 3RXT provides safe and comfortable newborn positioning thanks to the new 2-in-1 infant positioning liner with integrated newborn travel high wedge. The wedge creates a lie-flat travel position, pushing baby up to reduce head slump while helping to keep airways open. As your baby grows, simply remove the wedge to allow the 2-in-1 infant positioning liner to give extra infant comfort and toddler support. Designed and engineered with complete rear facing protection, radian 3RXT will keep now your precious cargo rear facing for even longer up to 50 lb / 22.7 kg, approx. 4 years old. Then as they transition to forward facing, the aluminum reinforced headrest can be adjusted to one of 12 positions for safety that grows with them up to 57” / 145 cm tall. Built with a mechanically engineered, reinforced steel core, made from automotive grade high strength steel, the radian is always ready to shield and protect. And when your family grows, the slim fit design will fit 3 acrosin most vehicles without compromising child safety or passenger comfort. As travel experts, Diono have naturally built in super portable features to the radian 3RXT with original fold for easy transport and storage and steel reinforced cup holders to store essential road trip drinks and snacks. The radian is also aircraft certified (FAA approved), so you can take safety with you wherever you go!
- SAFE & COMFORTABLE NEWBORN POSITIONING: Features newborn travel high wedge to create a safe and secure lie-flat travel position. The innovative technology pushes baby up to reduce head slump while helping to keep airways open. As your baby grows, simply remove the wedge to allow the 2-in-1 infant positioning liner for support
- REAR-FACING FOR LONGER: This slimfit convertible car seat is designed and engineered to keep your child rear facing even longer up to 50 lb/ 22. 7 kg, approx. 4 years old
- 10 YEARS ONE CAR SEAT: With 4 ways to travel safely from birth to booster, the radian 3RXT adapts as your child grows to offer a custom adjustable fit from birth to 120 lbs
- REINFORCED STEEL CORE: Mechanically engineered, reinforced steel core, made from automotive grade high density plastic and steel to create the ultimate protection for your child
- THE ORIGINAL 3 ACROSS: Built with our famous radian slim fit convertible design, to fit 3 across in most vehicles without compromising child or passenger comfort. Feel safe having your children secure in the backseat
Latest Reviews
View all
Cobra Golf Driver
- Updated: 07.05.2023
- Read reviews

Mom Pillows
- Updated: 15.03.2023
- Read reviews

Boss Speakers
- Updated: 22.07.2023
- Read reviews

Toe Fungus Treatment
- Updated: 25.04.2023
- Read reviews

Victorinox Garden Multi Tools
- Updated: 26.04.2023
- Read reviews