14 best tire guage

• ▲Check out our VIDEO on the left side and take a quick tour of AstroAI tire gauge! Backlit LCD display and Lighted nozzle for visibility in dimly light areas, best gift for men and women
• Designed to maintain correct tire pressure, reduce tire wear and extend tire life; Digital display reading instantly and clearly being shown, no longer do the guesswork of analog gauges
• Nozzle easily forms a seal with the valve stem on schrader valves, giving quick and accurate readings in 0.1 increments; 4 settings with range: 4-150PSI / 0-10Bar / 0-10Kgf/cm² or 0-1000KPA
• Simply press "ON/UNIT/OFF" button to turn on the tool, select the range, and automatically shut off in 30-40 seconds to save the power; Non-slip texture makes it easy to hold onto and the ergonomic design is both suitable for men and women's hands.Gauge automatically resets when taking pressure, no need to calibrate or reset the device
• 1 Year Warranty and battery included; Perfect car accessories gifts for men; Versatile use for cars, trucks, motocycles, bicycles etc but not compatible with presta stems

User questions & answers

Question:	Does the reading stay lit when removed from the valve or does it immediately shut off
Answer:	The filter is based on how many grains of solids it can filter. You have to find out how hard your water is and how much water you will use through it. This will kind of give you a rough estimate of how long the filter will last. This filter is rated at 750 grains, so do the math. With my Alex Duette 2 espresso machine making 5-6 drinks per day, I can go a year before changing the filter. But I change the filter every 6 months just because.
Question:	What kind of battery does this use and is it easily replaceable
Answer:	Remember this is a water softening filter not a particulate removal filter. Normally you put clean hard water through it and out comes softened water. You don't recirculate water through it. It is a one pass type filter. If you are softening with it and the water is coming out hard, you need to regenerate the ion exchange media by submerging in a small tub of brine water and then flush out the brine and it is ready to go.
Question:	How long do batteries last and is it easy to replace them
Answer:	I change the filter every 6 months, of course it depends on your water usage. Check on the packaging to see how many gallons the filter is good for and keep track of your water meter for a month or two to give you an idea.
Question:	Can these be used on balls with the needle
Answer:	A 10 X 2.5 filter housing.

Product features

AstroAI Digital Tire Pressure Gauge

The AstroAI Digital Tire Pressure Gauge helps you maintain correct tire pressure, reduce tire wear, and extend tire life. The Backlit LCD display and Lighted nozzle are for visibility in dimly light areas and the accurate and easy-to-read digits help you easily measure your vehicle's tire pressure.

Ultra-Slim and Portable

Easy to tuck away into any pocket.

Suitable for Hold

Fits nicely in cars glove compartment; Perfect car accessories gifts for men.

Light at Night

Backlit LCD display and Lighted nozzle for visibility in dimly light areas help you easily measure your vehicle's tire pressure.

Ergonomic Design

Non-slip texture makes it easy to hold onto and the ergonomic design is both suitable for men and women's hands

Lighted Nozzle and Backlit LCD Display

For visibility in dimly light areas

Automatically Shut Off

Automatically shut off in 30-40 seconds to save the power

On/Unit/Off' Button

Simply press to turn on the tool, select the range

Product description

The Campbell Hausfeld Shrader Tire Gauge, 0-60 PSI (DA552400) is a reliable accurate gauge when measuring air in your tires. Featuring a bleeder valve and easy to read gauge (0-60 PSI), the DA552400 is a must have for both bikes and vehicles. Finish your projects faster and easier with Campbell Hausfeld. The Air Power Expert

• The DA552400 features a bleeder valve for exact pressure adjustment
• Gauge accurately reads/measures PSI ranging from 0-60 which leads to optimal gas mileage
• Ideal for both bike and vehicle tires. Easy to read analog dial provides a user friendly experience
• Shrader design makes this gauge compatible with a variety of bike tires
• Finish your projects faster and easier with Campbell Hausfeld. The Air Power Expert

User questions & answers

Question:	what is the warranty
Answer:	For the DA552400AV, the cover & body are made of steel. The head is made of brass.
Question:	where is it made
Answer:	I am afraid I cannot answer this question. However, if you call 1-888-45-SLIME, I am sure they will be able to answer all your questions. This answer is based on information obtained from google.
Question:	Is this calibrated to ansi grade b accuracy
Answer:	Mine is I'd bet on the slime being more accurate, but no way to know for sure...
Question:	What material it made
Answer:	Mine has a chrome dial ring and stem. The diameter of the gauge is 2" and it is easy to read. It works fine and I am most pleased with it.

Product description

Pencil type passenger tire gauge reads up to 50 PSI or 350 kPa. Milton tire gauges provide accurate, long life with trouble free performance. Gauges are made of durable plated brass with 4 side nylon indicator bar. Always check tire pressure when tires are cold.

• MILTON: Pencil Gauges made with machined parts, unlike our competition! Made in the USA.
• INCLUDES: Built-in deflator valve, single chuck head, and white nylon indicator bar.
• PRESSURE RANGE: Measures PSI (5-50) in 1-lb. increments and Kilopascal (40-350) in 10-kPa increments.
• IDEAL: For passenger car applications. Handy in cold temperature weather conditions.
• CAR SAFETY/MAINTENANCE: Ideal automotive and road trip accessory tool to maintain optimal tire care and prevention.

User questions & answers

Question:	What is the maximum PSI reading provided by this gauge
Answer:	Seems like you purchased the wrong gauge for your car - this is a low pressure tire gauge meant for low pressure tires (atv, tractors, lawn mowers, etc.). You most likely need the 60 PSI gauge.
Question:	Why is there a picture of a pencil type tire gauge being called a dial tire gauge
Answer:	No. The standard Schrader valve
Question:	is this made in the usa
Answer:	It has a push on swivelling chuck. It is great and easy to use.
Question:	Is it made in the USA
Answer:	I would not use the gauges that I purchased on any liquid filled tire. These gauges work very good for my tires. I haven't searched for a liquid gauge, I believe that JACO might possible make one.

Product features

Miton Pencil Tire Pressure - Single Chuck Head | Passanger Car

Pencil type passenger tire pressure gauge comes with both a deflator button and built-in tire tread depth gauge. Offers a range up to 50 PSI or 350 kPa. Milton tire gauges provide accurate, long life with best in class performance. Made from durable plated brass with 4 side nylon indicator bar. Always check tire pressure when tires are cold.

Precision and Safety

Milton Single Chuck Head Pencil Tire Pressure Gauge will provide you with an accurate way to monitor your tire pressure and tread depth. Measuring your tire pressure is very important as incorrect pressure levels can lead to puncture damage, increased friction, worse vehicle handling, lower fuel economy, and a shorter life cycle for your tires. Stay safe and keep money in your pocket with this pencil gauge!

Made in the USA and Portable

Milton pencil gauges are made in the USA with machined parts, unlike our competitors, which is how we keep you on the road longer. Also, the pencil gauge with pocket clip can easily fit in your glove box or pocket for quick access.

High Quality and Versatile

Milton pencil tire pressure gauges provide accurate pressure readings on many different types of tires. This pressure gauge can be used on cars, trucks, motorcycles, and bicycles. Milton Single Chuck Head Pencil Tire Pressure Gauge consistently have a long life with trouble free performance.

Product description

Our Slime Pencil Tire Gauges are the ultimate solution to checking your tire pressure on the go! This pencil tire gauge measures from 10-50 psi and comes with 4 bonus valve caps! Available in a variety of color options: Black, blue, silver, orange, red and green.

• Reads 10-50 PSI accurately and effectively
• Gauge bodies come in various colors: Black, blue, silver, orange, red and green. Order will contain one of these colors randomly
• 4-sided tongue measures psi, kPa and bar & Bleeder pin built into the tire gauge head
• Standard pencil tire gauge 6″ in length with Built in metal pocket clip
• Tire sensor safe

User questions & answers

Question:	Does it have a metal body and head
Answer:	No....maybe 7 years ago, but now it is cheap/ light plastic

Product description

Having an exact measurement of your tire pressure is oftentimes the difference between lighting up the win lights and blowing your tires off at the line. Auto Meter's professional grade digital tire pressure gauge provides the most accurate measurement available in a durable package designed for the rigors of life at the track.

• 60 PSI gauge with Auto Meter's signature racing dial design
• Accuracy: 2.5% FS
• Large 2.25" dial face for easy viewing
• Shock dampening easy-grip housing
• 13.75“ Stainless braided line

User questions & answers

Question:	Where is this item Made
Answer:	The unit is cramped on both sides and has no thread.
Question:	Can you bleed off air with the chuck still connected to the valve stem
Answer:	Fits the following Nighthawk models:1983 - 1985 Honda CB650SC Nighthawk1991 - 1993 Honda CB750 Nighthawk1995 - 2003 Honda CB750 Nighthawk
Question:	does this hold the reading until released like the
Answer:	No these are not correct, 1994 - 2003 Honda Magna 750s ran EBC 343 Shoes on the rear.
Question:	Hi guys, quick question.. in the product details says that the line comes braided... it shows rubber on the picture.. also nascar badge or not
Answer:	It is a pair of shoes. Both shoes for a single brake drum. Thanks, Lyn - 661-245-2000

Product description

The Astro 3018 3.5" Digital Tire Inflator with Hose boasts a durable 21” stainless steel braided hose for increase durability and an easy to install AAA Battery System for 4X the battery life. Inflate, deflate and measure in KG, PSI or BAR with maximum accuracy and 0.1psi resolution for use with TPMS (Tire Pressure Monitoring System). This unit is designed with a large face backlit LCD digital read-out and is covered with a rubber sleeve for extra comfort and durability. Specifications: Measuring Range: 3 ~ 175PSI, Units: PSI/BAR/KPA/KGF, Resolution: 0.1 PSI, Accuracy: 0 – 58 psi +/- 1.2 PSI, 59 – 174 psi +/- 1.2 PSI, Working Temperature: 32°F~104°F (=0°C~ 40°C), Power: AAA Batteries, Battery Lifetime: 560hr

• New dual AAA battery powered design. 4X the battery life and simplified battery installation.
• New 21” Stainless braided hose for increased durability
• Maximum accuracy and 0.1psi resolution for use with TPMS (Tire Pressure Monitoring System)
• Displays KG, PSI or BAR measurement
• Large face backlit LCD digital read-out
• Unit covered with rubber sleeve for extra comfort and durability
• Two position lever. 1st position deflates, 2nd position inflates.

User questions & answers

Question:	What batteries does it use
Answer:	4-24-16 The one I received today IS the updated version with the steel mesh hose and 2 AAA batteries. Also, simplified battery installation/replacement procedure. Simply peel back the rubber cover, pry open battery compartment door, install batteries, replace compartment door and re-seat rubber cover.
Question:	Can this gage be used with the air hoses you find at many gas stations
Answer:	Everyone else has given you the common answer, which is no. But if you're a traveler, and you wanted to use this at gas stations, then you could add this: http://www.amazon.com/Amflo-701-2-npt-tank-valve/dp/B0002V4Q4I/ref=sr_1_8?ie=UTF8&qid=1410808589&sr=8-8&keywords=schrader+valve+adapter Then clip the gauge hose on your tire, and hold the station hose on the end of the gauge and that would work. Although maybe not real comfortable to do.
Question:	can the air chuck be replaced by a dual one, and if so what model
Answer:	Yes, the black air hose that is attached to this unit has 1/4" NPT on both ends and fits standard accessories. It appears that any of the Milton dual head air chucks will fit as they are furnished with female 1/4" NPT.
Question:	Does this unit hold and seal the tire stem well? The clamp looks the cheap one that doesn't stay on the valve stem
Answer:	Put on correctly, it seals and will hold air...it is not a cheap fitting. I have used mine to check tire pressure even without an air hose hooked up when I was just checking.

Product features

The Industry Leader: Rugged and Precise Design

The 3018 redesign boasts the most durable steel braided hose and easy to install AAA Battery System on the market. Inflate, Deflate and Measure in KG, PSI or BAR with maximum accuracy and 0.1psi resolution for use with TPMS. (Tire Pressure Monitoring System).

Easy To Install Battery Port

4-times the battery life of other popular models and no disassembly of product required. Simply peel back the rubber sleeve and pop off the cover.

Durable Steel Braided Hose

Now with new rubber bend guard for increased durability where its needed, Astro's long lasting flexible braided stainless hose is a popular feature.

Lock-On Air Chuck

Heavy duty brass chuck clips and holds onto valve stem for easy, one-hand operation.

Product description

Low pressure tire gauge for 2-20 PSI provides accurate, long life with trouble free performance. Made of a durable plated brass with 4 side nylon indicator bar. Always check tire pressure when tires are cold.

• Perfect for ATVs, golf carts and air springs
• Made with machine parts unlike the competition
• Includes inflator gauge
• Range of 20-140 kilopascal
• Made in USA

User questions & answers

Question:	Product features states “Includes inflator gauge”. What is an inflator gauge
Answer:	Yes it does. I purchased it to read the pressure of a reverse osmosis water system tank. It works great.
Question:	Will this guage work with my polaris 450? Thanks
Answer:	It is NOT accurate with my bike tires at 75psi. The cars seem right at about 35psi. Maybe my unit is defective, but it just doesn't seem to give a valid reading on the bike tires. Seems great for cars. Also... doesn't work on Presta valves, so just know that.
Question:	Just wanted to make sure the description is wrong. Is it a low pressure 2 - 20 lb. gague? That is what I need. Thanks
Answer:	I have been using this maybe once a month for more than a year. I was surprised to the display went blank. Ordered CR2016 from Amazon for a replacement battery. Opening the case is not a big issue just two Philip screws. Found 3 more batteries different size and wondered if I ordered a wrong battery. Just moving the old CR2016 Battery a little the display started working again. Before you order a new battery, check if the battery connection. CR2032 3V Lithium Coin Cell - main battery for display and electronic LR44 1.5V Button three Cells - for the LED light ( gauge works without these batteries) See the picture in the review section
Question:	Product info at top of page states range of 20-140 kilopascal. product description states low pressure tire gauge for 2-20 psi. which is correct
Answer:	Yes,... And it will record the progress of the deflation... The Patriots should have used this device.

Product features

Four Types of Milton Pencil Tire Pressure Gauge Chuck Head Variations:

- Single Head.

- Straight Head.

- Dual Head.

- Straight Foot Dual Head.

Four Types of Milton Pencil Tire Pressure Gauge Chuck Head Variations:

- Single Head.

- Straight Head.

- Dual Head.

- Straight Foot Dual Head.

Four Types of Milton Pencil Tire Pressure Gauge Chuck Head Variations:

- Single Head.

- Straight Head.

- Dual Head.

- Straight Foot Dual Head.

Four Types of Milton Pencil Tire Pressure Gauge Chuck Head Variations:

- Single Head.

- Straight Head.

- Dual Head.

- Straight Foot Dual Head.

Product description

Slime's new Elite Digital Tire Gauge takes air pressure innovation to the next level! That 1 to 2 psi you lose every time you check your tire pressure? Not any more! Slime’s advanced Pressure Airlock Technology (P. A. T. ) locks in the air, so there is ZERO air loss when checking your air pressure with this gauge. Gain the most accurate tire pressure reading every time! Plus, the Elite Digital Tire Gauge makes it easy to see your tire pressure reading with its super big, bright LCD screen (50% larger than most digital tire gauges). Add in a thoughtful ergonomic design with a light to illuminate your work space and you have yourself an awesome tire gauge.

• Bigger and brighter LCD screen (50% larger than most digital tire gauges)
• Super easy to read (5-150 psi)
• Extreme accuracy with Slime's new Pressure Airlock Technology (P. A. T. )
• Ergonomic design with rubberized grip
• Bright LED light for night use

User questions & answers

Question:	What is the psi range
Answer:	5-150 psi.
Question:	What is the minimum pressure
Answer:	5 PSI (spec'd range is 5—150 PSI)
Question:	What is the measurement accuracy for this gauge? I noticed there is no spec listed here or on the Slime website, which tells me it’s not very good
Answer:	I bought a big circular tire gauge based on a ton of their specs and it was off by 10 psi at 80 psi. I complained to the supplier and they said they had a run of bad ones and sent me a second one. It too is off by 10 psi so I no longer trust the printed nonsense. I usually go to one of the tire big-name suppliers and have them inflate a tire and then check my gauge against theirs. I have not had a chance to do that with this new gauge because of the CV-19 but it seems about right in the 30 to 35psi range. The really best part of this gauge is it does not leak air during the pressure ck. Have fun
Question:	What kind of batteries does this Slime 20475 tire gauge take
Answer:	This tire gauge takes 3 L1154F batteries. Instructions on how to replace them can be found here: https://cdn.shopify.com/s/files/1/2217/0259/files/20475_Battery_Instructions.pdf?3188881984010885741

Product description

Joes Racing Products Pro Tire Gauges are durable, dependable, accurate and easy to use. Each Pro Tire Gauge comes with a flexible 17'' rubber hose, along with a swivel and an angle chuck so you can choose which chuck is best for your application.

• Obtainable in 0-15, 0-30 and 0-60
• Durable steel housing and external rubber cushion
• Repeatable accuracy, reads the same every time
• Fit type: Universal Fit

Product description

SIMPLY BETTER AIR Exclusive Quick ClickTM System Milton’s field re-calibratable service gauge is designed for precise measurement and durability. We combined high quality componentry and dial-in accuracy for a long life and trouble-free Performance. Features a corrosion-resistant chrome-plated brass tubular body and a premium black anodized aluminum indicator bar. An extended-reach chuck and off-set head make it easier to measure tire pressure at almost any angle. A simple hook allows for convenient wall storage. Quick Click Mechanism With a quick click you can easily calibrate your gauge to the desired point just by “feel”. Simply attach calibration tool to gauge and rotate the stick to adjust – each precise click of the tool equals 0. 25 PSI Calibration Calibrate back to zero It takes 2 clicks of the calibration tool to revert the gauge back to zero Specifications: - Extended-reach Large bore dual head chuck- 2-side aluminum indicator bar, PSI- Calibrated in three ranges before leaving the factory- Pressure Range: 10-160 PSI, 2 PSI Increments Drive Safely: Maintaining proper tire pressures improves vehicle handling, reduces risk of tire failure, improves fuel economy, and increases the life of your tires.

• Patent pending Quick Click calibration technology allows the gauge to be adjusted in the field to ensuring accuracy
• Heavy duty plated brass with seamless tube construction. Resists corrosion and stands up to the most demanding service environments
• Laser inscribed aluminum scale bar provides easy-to-read precision, 10-160 PSI range in 2 PSI increments
• Large bore dual head chuck for heavy duty equipment utilizing large bore valve types
• Includes clip-on calibration tool and hang loop - Made in USA with US and Global Components

User questions & answers

Question:	Can someone explain how the calibration works
Answer:	No there isn't a gauge.

Product features

SIMPLY BETTER AIR Exclusive Quick Click System

Milton’s field re­calibratable service gauge is designed for precise measurement and durability. We combined high­quality componentry and dial­in accuracy for long life and trouble­free performance. Features a corrosion­resistant chrome­plated brass tubular body and a premium black anodized aluminum indicator bar. An extended­reach chuck and off­set head make it easier to measure tire pressure at almost any angle. A simple hook allows for convenient wall storage.

Pressure Measurements: 10­-160 PSI Range in 2 PSI Increments

Milton’s field re­calibratable service gauge is designed for precise measurement and durability. We combined high­quality componentry and dial­in accuracy for long life and trouble­free performance. Laser inscribed aluminum scale bar provides easy­to­read precision.

Your Choice of Air chuck

Your Choice of Air chuck: Dual Head Straight Foot, Dual Head or Large Bore Dual Head. Made of heavy duty plated brass with seamless tube construction. Resists corrosion and stands up to the most demanding service environments.

Quick Click Calibration Technology

With a “quick click” you can easily calibrate your gauge to the desired point just by “feel”. Simply attach calibration tool to gauge and rotate the stick to adjust ­ each precise click of the tool equals 0.25 PSI calibration.

Bent Extended Dual Head Straight Foot Air Chuck

Dual Head Air Chuck

Dual Head Straight Foot Air Chuck

Large Bore Dual Head Air Chuck

Product description

"EXELAIR by Milton (EX448DIG) Digital Tire Tread Depth Gauge

Low tire pressure, minimal tire tread, and balding tires can be very dangerous on the road, especially during wet/cold weather conditions on the road. Avoid blowouts and punctured tires by keeping track of well-inflated tires and being aware of their tread level. This unique digital tire gauge is ideal for travel due to its compact size. The digital viewing window makes reading the tire tread depth gauge in both inch and metric scales quick and easy. The zero setting, or tare, works in any position for convenience. Includes 1 LR44 battery.

Combine value and peace of mind with this budget-friendly, versatile automotive staple. These make great gifts for those you care about!

DRIVE SAFELY: Maintaining proper tire pressures improves vehicle handling, reduces risk of tire failure, improves fuel economy, and increases the life of your tires."

• ACCURATE: Performance-tested and calibrated. Measures/reads tire tread depth in both inches and millimeters (range: 0 to 1 inch, 0 to 25 mm).
• SAVE MONEY: On fuel cost and consumption. PROTECT: Yourself, your passengers, and your vehicle.
• EASY PUSH: On/Off (on the left) and Zero (on the right) buttons. Zero/Tare setting at any depth. Digital display screen for accuracy.
• CAR SAFETY/MAINTENANCE: Ideal automotive and road trip accessory tool to maintain optimal tire care and prevention. Proper tire tread is key to good road traction. These make great gifts for those you care about.
• AUTOMATIC SHUT-OFF: Features an auto shut-off to save battery life. Battery included.

User questions & answers

Question:	Does this measures tire pressure or only tread
Answer:	Don't know about ALL, but mine did - a simple mount that mounts between the water bottle cage and the bike frame. I wish the mount held the pump just a little bit farther off the frame - as it is, the pump rubs on the bike frame on one place. I fixed this with a small piece of black duct tape on the bike's black frame.

Product features

EXELAIR by Milton (EX448DIG)

This Digital Gauge Features:

Product description

Pencil pressure tire gauges provide accurate, long life with trouble free performance for 20-120 PSI in 2 pound increments. Durable plated brass with 4 side nylon indicator bar. Always check tire pressure when tires are cold.

• For use on trucks, RVs and bicycle tires
• Working pressure range of 20 to 120 pounds per square inch in 2 pound increments
• Reads in both kilopascal and pounds per square inch
• Single head chuck with deflator valve
• Made in USA

User questions & answers

Question:	Works with presta valves
Answer:	I have no idea. I would check Amazon to see if they carry it, or reach out to the company. Sorry.
Question:	One part of the description says it is made in the usa and the other part of the description says origin:china. where is it made
Answer:	6 and a quarter inches long. 3/4 inch wide
Question:	Does the gauge retract immediately when removed from the stem or can you take a pressure reading and then move the gauge to where it's easier to read
Answer:	Yes, it comes with a mount.
Question:	What is the country of origin? Is it made in the USA
Answer:	The amount of pumping you will have to do to get your tire to an adequate pressure....CO 2 inflators are a great way to inflate your tire, but you still need that standby pump.

Product features

Four Types of Milton Pencil Tire Pressure Gauge Chuck Head Variations:

- Single Head.

- Straight Head.

- Dual Head.

- Straight Foot Dual Head.

Four Types of Milton Pencil Tire Pressure Gauge Chuck Head Variations:

- Single Head.

- Straight Head.

- Dual Head.

- Straight Foot Dual Head.

Four Types of Milton Pencil Tire Pressure Gauge Chuck Head Variations:

- Single Head.

- Straight Head.

- Dual Head.

- Straight Foot Dual Head.

Four Types of Milton Pencil Tire Pressure Gauge Chuck Head Variations:

- Single Head.

- Straight Head.

- Dual Head.

- Straight Foot Dual Head.

Product description

Hiltex Gas Station Style Tire Inflator, 6" Chrome Plated Steel Dual with 120PSI Gauge and 12 Hose for tires, Female 1/4 NPT.

• [PRECISION]: Handheld lever throttle provides user with precise control of air exertion from 12-inch rubber hose and tire air compressor.
• [QUALITY]: Specialized HD brass valve fitting and polish chrome plated steel finish is rust and corrosion resistance to endure long life span.
• [DURABLE]: Heavy duty cast aluminum steel body construction is designed for longevity and durability.
• [DESIGN]: Dual head chuck is 6-inches long and able to reach stems on inner dual wheels with ease for added convenience.
• [CONVENIENCE]: Built-in gauge is easy-to-read and measures pressure of 10-120 PSI in 2 pound increments.

User questions & answers

Question:	Is this a quality product or a husky knockoff? it looks similar, but i don't see the husky inflator gauge on amazon
Answer:	YOUR TACOMA IS A 5 FOOTER XTRA SHORTBED THERE IS ONLY ONE STYLE OF 5FT TACOMA BEDS FROM 2016-19

Product description

The TireMinder High Precision RV Gauge offers an incredibly accurate 1 PSI precision level and premium all metal construction. It features replaceable "AAA" batteries (included), two interchangeable heads (straight and 45°), a bright LED backlight, a "no sweat" custom grip, a front facing flashlight and a 5 year warranty.

• +/- 1 PSI Precision from 10-150 PSI
• Replaceable "AAA" Batteries (Included)
• Interchangeable Heads (Straight & 45°)
• Features High Quality All Metal Construction, "No Sweat" Custom Grip, Front Facing Flashlight and Green LED Backlight
• 5 Year Warranty

User questions & answers

Question:	I’ve had 3 break at the handle so far, how is this one different/stronger
Answer:	How the heck are you breaking them? I’ve had this one for over 3 years. Accurate and I guess, strong.
Question:	They rejected it and it can not be calibrated according to your product details that is way off
Answer:	Could not calibrate but consistently 2 PSI off so as long as I know still worth the Peace of Mind
Question:	does this have a way to use it to let air out of the tire
Answer:	Not specifically. Like, with all tire gauges, you will have to "tilt" the gauge slightly to the side, breaking the seal between the gauge and the tire. Tilting it back, will allow you to read the pressure after you let out air.
Question:	is this made in China
Answer:	Probably. But it is the best and most accurate tire gauge I have owned. Solid and we'll made.