11 best ball joint pullers

• ALL IN ONE FRONT END SERVICE KIT: Containing 5 adjustable tools for a wide range of domestic and import vehicles. Comes with 1x Ball Joint Separator, 1x Tie Rod and Ball Joint Remover, 1x Conical Pitman Arm Puller, 1x Pitman Arm and Tie Rod End Puller, 1x Pitman Arm Puller, 1x well-organized ABS case.
• HARDENED ALLOY CONSTRUCTION: Extraordinarily tough and durable alloy means these tools can stand up to the toughest jobs. This front end service tool kit can remove the most stubborn ball joints, tie rod ends, and pitman arms.
• UNIVERSALLY COMPATIBLE WITH A WIDE RANGE OF VEHICLES: The versatile design allows this tool to be used as a pitman arm remover, ball joint separator, or tie rod end puller for many small, domestic rear-wheel-drive vehicles, import vehicles, and light trucks.
• PROFESSIONAL PORTABLE ABS CASE: The custom-molded case is crafted from high-quality ABS hard plastic for the amateur or professional mechanic on the go. Conveniently keeps all your tools in one organized and secure place. Never miss out on a job or project from a misplaced tool.
• ORION MOTOR TECH PROMISE: If any issues from our tools arise please don’t hesitate to contact us. We guarantee the quality of our tools and want to ensure you’re only getting the best. Because to do perform your best, you deserve the best, that’s our Orion Motor Tech Promise.

User questions & answers

Question:	Will these work on 06 Jeep Wrangler
Answer:	It should be able to
Question:	What is the warranty for this
Answer:	Yes it should.
Question:	Would this kit work for an 01 Chevy Blazer 2 - door
Answer:	well i have not tried in on a truck yet. the info on the page says dodge 4x4 trucks, so i would believe that it does.. good luck
Question:	Will this work on my 03 Dodge 3500 diesel 4 wheel drive
Answer:	It should

Product features

Package Content

1x Ball Joint Separator

1x Tie Rod And Ball Joint Remover

1x Conical Pitman Arm Puller

1x Pitman Arm And Tie Rod End Puller

1x Pitman Arm Puller

Pitman Arm and Tie Rod End Puller

This versatile tool can be used as a pitman arm remover for many small, domestic rear-wheel drive vehicles, or as a tie rod end puller for many domestic and import vehicles. The jaws, with a spread of 1", give a secure grip in tight work spaces.

1-1/8" jaw spread, 2-1/8" throat depth

Pitman Arm Puller

This puller will handle nearly any pitman arm job on passenger cars and light trucks. It features special forged jaws, shaped to fit most models, keeping a solid grip while you work.

1-11/32" jaw spread, 2-1/2" throat depth

Conical Pitman Arm Puller

Designed to fit securely on Pitman arms for compact and mid-size cars.

3/4-16 x 4-3/4" forcing screw provides enough power to remove stubborn pitman arms.

Ball Joint Separator

For separating the ball joint from the spindle support arm on domestic and import front wheel drive vehicles adjustable for different size ball joints

1-1/8" & 2-1/8" (30 & 56mm) maximum opening capacity

7/8" jaw spread, 2-1/4" throat depth

Tie Rod and Ball Joint Remover

A universal heavy-duty puller that removes a wide range of tie rods and ball joints from a variety of cars, trucks, SUVs and heavy-duty vehicles.

0 to 2-1/2" jaw spread, 3-1/4" throat depth

• 1. ALL IN ONE FRONT END SERVICE KIT: Containing 5 adjustable tools for a wide range of domestic and import vehicles. Comes with 1x Ball Joint Separator, 1x Tie Rod and Ball Joint Remover, 1x Conical Pitman Arm Puller, 1x Pitman Arm and Tie Rod End Puller, 1x Pitman Arm Puller, 1x well-organized ABS case.
• 2. HARDENED ALLOY CONSTRUCTION: Extraordinarily tough and durable alloy means these tools can stand up to the toughest jobs. This front end service tool kit can remove the most stubborn ball joints, tie rod ends, and pitman arms.
• 3. UNIVERSALLY COMPATIBLE WITH A WIDE RANGE OF VEHICLES: The versatile design allows this tool to be used as a pitman arm remover, ball joint separator, or tie rod end puller for many small, domestic rear-wheel-drive vehicles, import vehicles, and light trucks.
• 4. PROFESSIONAL PORTABLE ABS CASE: The custom-molded case is crafted from high-quality ABS hard plastic for the amateur or professional mechanic on the go. Conveniently keeps all your tools in one organized and secure place. Never miss out on a job or project from a misplaced tool.
• 5. ORION MOTOR TECH PROMISE: If any issues from our tools arise please don’t hesitate to contact us. We guarantee the quality of our tools and want to ensure you’re only getting the best. Because to do perform your best, you deserve the best, that’s our Orion Motor Tech Promise.

User questions & answers

Question:	Does this tool have a lifetime warranty
Answer:	Sorry I didn't keep it so I don't know
Question:	Will these tools work on a 1968 vw bus T
Answer:	No
Question:	Buenas tarde.. me sirve este extrator para el 190 d. slsd? saludos
Answer:	This is an obsolete sprayer. We have very few parts available. Please call 1-800-223-5168, option 1 for the availability of parts.
Question:	Does OTC rebrand this kit
Answer:	You are right...Where is the hydraulic agitator? Although it is in the product description; there is none contained in the device which was shipped to me. My guess is you are the agitator as you mix whatever you intend to spray in a separate container. I did not catch this in the product description, its not in the product-unless you consider the pump the agitator? I would contact the Oregon Company and pose the same question directly to them.

Product features

Conveniently organized in a compact carry case, it cleans up easy and keeps your adapters and thrust bolts organized.

-

Still looking for a long-lasting compression test gauge kit?

Our tools are made of incredibly strong materials, standing up to heavy use or accidental drops - perfect for professionals or home garages.

Afraid it might not be compatible with your vehicle?

No worries. Give it a try and if you realize you have one of the few vehicles that it doesn't fit, please don’t hesitate to reach out to our team.

PERFECT FOR: most compact cars, mid-size cars and light pickup trucks.

NOT SUITABLE FOR: Most full-size cars, mid-size and full-size pickup trucks.

Package Content

1x Ball Joint Separator

1x Tie Rod And Ball Joint Remover

1x Conical Pitman Arm Puller

1x Pitman Arm And Tie Rod End Puller

1x Pitman Arm Puller

Pitman Arm and Tie Rod End Puller

This versatile tool can be used as a pitman arm remover for many small, domestic rear-wheel drive vehicles, or as a tie rod end puller for many domestic and import vehicles. The jaws, with a spread of 1", give a secure positive grip in tight workspaces.

1-1/8" jaw spread, 2-1/8" throat depth

Pitman Arm Puller

This puller will handle nearly any pitman arm job on passenger cars and light trucks. It features special forged jaws, shaped to fit most models, keeping a solid grip while you work.

1-11/32" jaw spread, 2-1/2" throat depth

Conical Pitman Arm Puller

Designed to fit securely on Pitman arms for compact and mid-size cars.

3/4-16 x 4-3/4" forcing screw provides enough power to remove stubborn pitman arms.

Ball Joint Separator

For separating the ball joint from the spindle support arm on domestic and import front wheel drive vehicles adjustable for different size ball joints

1-1/8" & 2-1/8" (30 & 56mm) maximum opening capacity

7/8" jaw spread, 2-1/4" throat depth

Tie Rod and Ball Joint Remover

A universal heavy-duty puller that removes a wide range of tie rods and ball joints from a variety of cars, trucks, SUVs and heavy-duty vehicles.

0 to 2-1/2" jaw spread, 3-1/4" throat depth

• 1 ALL IN ONE FRONT END SERVICE KIT: Containing 5 adjustable tools for a wide range of domestic and import vehicles. Comes with 1x Ball Joint Separator, 1x Tie Rod and Ball Joint Remover, 1x Conical Pitman Arm Puller, 1x Pitman Arm and Tie Rod End Puller, 1x Pitman Arm Puller, 1x well-organized ABS case.
• 2 HARDENED ALLOY CONSTRUCTION: Extraordinarily tough and durable alloy means these tools can stand up to the toughest jobs. This front end service tool kit can remove the most stubborn ball joints, tie rod ends, and pitman arms.
• 3 UNIVERSALLY COMPATIBLE WITH A WIDE RANGE OF VEHICLES: The versatile design allows this tool to be used as a pitman arm remover, ball joint separator, or tie rod end puller for many small, domestic rear-wheel-drive vehicles, import vehicles, and light trucks.
• 4 PROFESSIONAL PORTABLE ABS CASE: The custom-molded case is crafted from high-quality ABS hard plastic for the amateur or professional mechanic on the go. Conveniently keeps all your tools in one organized and secure place. Never miss out on a job or project from a misplaced tool.
• 5 ORION MOTOR TECH PROMISE: If any issues from our tools arise please don’t hesitate to contact us. We guarantee the quality of our tools and want to ensure you’re only getting the best. Because to do perform your best, you deserve the best, that’s our Orion Motor Tech Promise.

Product description

Never compromised on quality, fully equipped with state-of-the-art technology - Designed with the user optimal experience in mind. International Renown, constantly modernizing powerful devices to meet the demands of the modern user.

• For difficult to remove, seized, rusted and/or corroded bolt-in Subaru ball joints
• Designed for easy use with vehicle on jack stands using a deep 24mm socket and impact or hand wrench
• Or use included 5/8-18 thread adapter with any common slide hammer
• Unique sliding pin non-rotating design removes ball joints in a single pulling motion without spinning the ball joint stud, reducing the chance of ball joint breakage
• For Subaru Baja 2003+, Forester 1998+, Impreza 1993+, Legacy 1990+, Outback 2000+ and more

User questions & answers

Question:	does the tool work with any other cars beside subaru
Answer:	No, i do not believe this will stand alone. Angie/HNSTools
Question:	I wonder if anyone knows if the subaru balljoint & nissan hicas balljoint are the same thread? hicas kit is same idea but 4x the price
Answer:	Yeah unfortunately it will still tip over since since it isn’t well balanced and the tape measurer holder holds your tape kind of loosely and will cause your tape to pop out if you try to stand the pouch. Other than that I’ve got no complaints the bag is great
Question:	Will the socket lock onto a ball joint with damaged threads
Answer:	Yes has 3 carry options
Question:	Can this remove the ball joint without damaging it
Answer:	depth is 8-9 inches width is 6 inches length is 12 inches

Product description

Part Name: Ball Joint Separator

◆Front end service tool kit,  for a simple repair or the most complex drivability concern, these award-winning tools universally solve problems faster, and at better value, than any other product line available. Whether it’s a specialty tool or unique piece of service equipment,  provides top solutions to modern automotive service challenges while increasing technicians’ productivity and shop profits.

◆Front end service tool kit Features:

1) Tie Rod and Ball Joint Remover

A universal heavy-duty puller that removes a wide range of tie rods and ball joints from a variety of cars, trucks, SUVs and heavy-duty vehicles. 0 to 2-1/2" jaw spread, 3-1/4" throat depth

2) Ball Joint Separator

For separating the ball joint from the spindle support arm on domestic and import front wheel drive vehicles adjustable for different size ball joints. 1-1/8" & 2-1/8"(30 & 56mm) maximum opening capacity, 7/8" jaw spread, 2-1/4" throat depth

3) Conical Pitman Arm Puller

Designed to fit securely on Pitman arms for compact and mid-size cars. 3/4-16 x 4-3/4" forcing screw provides enough power to remove stubborn pitman arms.

4) Pitman Arm and Tie Rod End Puller

This versatile tool can be used as a pitman arm remover for many small, domestic rear-wheel drive vehicles, or as a tie rod end puller for many domestic and import vehicles. The jaws, with a spread of 1", give a secure grip in tight work spaces. 1-1/8" jaw spread, 2-1/8" throat depth

5) Pitman Arm Puller

This puller will handle nearly any pitman arm job on passenger cars and light trucks. It features special forged jaws, shaped to fit most models, keeping a solid grip while you work. 1-11/32" jaw spread, 2-1/2" throat depth

◆Package Includes:1x Ball Joint Separator, 1x Conical Pitman Arm Puller, 1x Pitman Arm Puller, 1x Tie Rod And Ball Joint Remover, 1x Pitm

• ◆Front End Service Tool Kit: Includes 5 adjustable tools for a wide range of domestic and import vehicles. Comes with 1x Ball Joint Separator, 1x Conical Pitman Arm Puller, 1x Tie Rod and Ball Joint Remover, 1x Pitman Arm Puller, 1x Pitman Arm and Tie Rod End Puller, 1x well-organized ABS case.
• ◆Tool kit ball joint separators are widely used: for general small household rear-wheel drive vehicles, imported vehicles and light trucks. The front-end service kit can be used as a pitman detachers, ball joint separators or tie rod end puller. But not suitable: most full-size cars, medium and full-size pickup trucks
• ◆Tie rod end tool set for front end Service, made of extraordinarily tough and durable alloy, can stand up to the toughest jobs. can remove the most stubborn ball joints, tie rod ends, and pitman arms. have maximum strength and longevity that resists rust and corrosion.
• ◆Portable Case:The custom-molded case is crafted from high-quality ABS hard plastic for the amateur or professional mechanic on the go. keeps kit components organized and protected when not in use.Tool Kit Ball Joint Separator Other Names:ball joint separator set, ball joint separator tool, ball joint separator kit,ball joint separator hydraulic, pitman arm puller set, pitman arm puller tool set, pitman arm puller kit, pitman arm puller tool set, pitman arm remover, pitman arm puller heavy duty
• ◆Providing high quality and professional parts with great service.if you have any questions, please feel free to contact us by email for more information!We will solve it for you in the first time!

Product description

Removes the front suspension ball joints quickly, safely and efficiently with damage. 19mm (3/4") hexagon drive spindle can be turned with a wrench or impact wrench. A hex on the main socket body is for holding in place while servicing. Applications: Impreza 1993-2014, Forester 1998-2015, Legacy 1994-2014, Outback 1994-2014, Baja 2003-2006 & Saab 9-2X 2005-2006

• Removes the front suspension ball joints quickly, safely and efficiently with damage
• 19mm (3/4") hexagon drive spindle can be turned with a wrench or impact wrench
• A hex on the main socket body is for holding in place while servicing
• Applications: Impreza 1993-2014, Forester 1998-2015, Legacy 1994-2014, Outback 1994-2014, Baja 2003-2006 & Saab 9-2X 2005-2006

User questions & answers

Question:	Can this be used for any ball joint on any vehicle
Answer:	No, it is primarily used for Subaru applications. We recommend other CTA products: #4004, #4013, #4011, #A412, #A415, #4019, #1031 & #8650M.
Question:	Is there a warranty on the tool
Answer:	Yes, it's free from manufactures defect.

Product description

Alltrade Tools LLC is a global leader in the design, manufacturing and marketing of innovative products for home, garage and worksite. Founded in 1979, Alltrade is privately Held and maintains global sourcing, research, assembly and sales facilities to serve customers on every continent.

From the Manufacturer

Each kit includes step-by-step usage instructions and photos showing the tool in use. Instruction sheets are laminated to resist staining and are permanently fastened to the case. All instructions are developed by a professional repair manual writer. Kit 46 tools are for removing and installing most sizes of press-fit ball joints. Allows change out of ball joint without removal of the control arm. These tools can also be used to remove and replace U-joints. The set includes - 1 PC - PLUG: O.D. 7/8" 1 PC - RECEIVING TUBE: OD: 2-1/4", ID:2", 2"(L) 1 PC - INSTALLING TUBE: OD: 2", ID: 1-3/4", 3"(L) 1 PC - RECEIVING TUBE: OD: 2-1/2", ID: 2-1/4", 1-1/2" (L) 1 PC - RECEIVING CUP: OD:2 -1/4", ID: 1-7/8", 7/16" (L) 1 PC - RECEIVING TUBE: OD:2 1/2", OD: 2-1/4", 3/4" (L) 1 PC - RECEIVING TUBE: OD:2-7/16", I.D:2-3/16", 3-3/16"(L) 1 PC - REMOVER/INSTALLER: OD:1-7/16", I.D:3/4", 1" (L) 1 PC - INSTALLING TUBE: OD: 2", ID: 1-3/4", 2-5/16" (L) 1 PC - RECEIVING CUP: OD: 2-1/8:, ID: 1-3/4", 1/2" (L) 1 PC - RECEIVING TUBE: OD: 2-1/2", ID: 2-1/4", 2-3/4" (L) 1 PC - RECEIVING TUBE: O.D.: 3", ID: 2-3/4", 2-1/4" (L) 1 PC - RECEIVING TUBE: O.D.: 2-3/4", ID: 2-7/16", 2-1/4"(L) 1 PC - RECEIVING TUBE: OD: 2-7/8", ID: 2-5/8", 2-7/8" (L) 1 PC - SCREW 1 PC - C-FRAME 1 PC - RECEIVING TUBE: 1-3/4" X 2" 1 PC - RECEIVING TUBE: 2-1/4" X 2-1/2" 1 PC - RECEIVING TUBE: 2-3/4" X 3" 1 PC - REMOVAL ADAPTER 1 PC - INSTALL ADAPTER 1 PC - 3/4"DR. X 1-59/64". 2"(L) 1 PC - 3/4"DR. X 2-9/64". 2"(L) 1 PC - BLOW MOLDE CASE

• Harm Bal/ crank PULLEY P
• Tool solutions for most all situations
• Built to exceed tool standards
• Designed to help you remove and install press-fit type ball joints without taking the control arm off the vehicle
• Kit services: most Domestic and import rear wheel drive vehicles
• Remove and install pressed-in Ball Joints found on most vehicles
• Remove and install special threaded upper Ball Joints found on many Chrysler vehicles

User questions & answers

Question:	Hi, can anyone confirm this will work with a 2000 wrangler for Ball joints? Thanks
Answer:	This is a universal kit it should work I bought one couple years back saved me so much money so far it actually paid for itself twice
Question:	What size socket is needed to drive the screw
Answer:	It uses a 7/8" socket, and a breaker bar would help you alot too. If you own a shop then this is perfect, if not and just want to service your own car do make sure that the ball joints on your car are pressable (NOT PERMANENTLY PRESSED - you'd just have to replace the whole control arm and not need this kit)
Question:	Is it made in the usa
Answer:	Don't know and can't see any 'Made in the USA' stampings on the components. All I know is that it's built very well, it's strong, and does the job without any problems. Configuring the components to press in/out is a challenge, but I was able to get it to work as advertised. There is a manual that comes with the kit to help out with the configurations. I would definitely recommend this kit!
Question:	will it service a dodge 2500. 2006 yr
Answer:	It should service all pressed ball joints

Product features

Powerbuilt 23 Piece Ball Joint & U-Joint Service Kit

Replacing ball joints is time-consuming enough without having to disassemble half the car to reach them. This innovative tool set is designed to save time and frustration by helping you remove and install press-fit type ball joints without taking the control arm off the vehicle. This set can also be used for removing or installing U-joints. Strong and dependable enough to last a lifetime.

Kit Services: Most domestic and import rear wheel drive vehicles

Any specialty tool will help make an automotive repair or maintenance task easier, but Powerbuilt automotive installer tools take the concept of ‘help’ a big step further. It starts with the storage case – heavy-duty design ensures it will stand up to years of use and abuse.

• Removes and installs press-fit type ball joints without taking the control arm off the vehicle. This set can also be used to remove and install U joints.
• Durable storage case with step-by-step instructions

Set includes:

• receiving tube 2-7/8" OD x 2-7/8" L
• receiving tube 2-7/16" OD x 3-3/16" L
• installing adapter 2" OD x 3" L
• receiving tube 2-3/4" OD x 2-1/4" L
• receiving tube 2-1/4" OD x 2" L
• receiving tube 2-1/2" OD x 1-1/2" L
• installing/removing adapter 3-1/16" OD x 1-1/8" L
• installing adapter 3" OD x 1-1/8" L

• 【High Quality】A ABIGAIL Front End Service Tools Set is made of high quality forged steel which ensure high strength for the tools and give it a long lifetime, perfect for professional machinists.
• 【Complete Set】Large C-shape puller: jaw spread: 1-11/32", throat depth: 2-1/2", Small C-shape puller: jaw spread: 1-1/8", throat depth: 2-1/8" Large swing arm puller: jaw spread: 0 to 2-1/2", throat depth: 3-1/4"Small L-shape puller: jaw spread: 3/4", throat depth: 1-3/4" Large rocker arm puller: jaw spread: 7/8", throat depth: 2-1/4" large C-shape puller.
• 【Multifunction】 Allows for easy removal of the most popular types of pitman arms, tie rods, and ball joints. The press-type ball joint separator allows for ball joint removal without damage to boots and other parts that fork-type removers may cause.
• 【Easy Storage】All-in-one Tool Set in a heavy-duty blow-mold case with handle and latches for secure storage, simple organization and easy transportation.
• 【Service】100% satisfaction guarantee, If you have any issues with the Front End Service Tools Set, simply contact customer service for troubleshooting help, parts, replacement, or refund. Our aim is to make you satisfy the parts and the service we provide for you.

User questions & answers

Question:	Will this kit work with a 97-02 ford expedition? doing a shock-on-strut conversion, and need to knock my upper control arm loose for more space
Answer:	I am not 100% on a ford but I would say yes. Most standard size gas vehicles are similar as far as front end parts
Question:	will the pitman puller work on a 68 camaro
Answer:	Yes
Question:	will this work on my 1971 chevelle
Answer:	It should
Question:	Will this work for 99 Chevy suburban k2500 front end, this is a 3/4 ton
Answer:	Yes I just mine last week work great

Product features

About A ABIGAIL Professional Front End Service Pitman Arm Puller Tool Kit

A ABIGAIL Front End Service Tools Set is made of high quality forged steel which ensure high strength for the tools and give it a long lifetime, perfect for professional machinists. This versatile set allows for easy removal of the most popular types of pitman arms, tie rods, and ball joints. The press-type ball joint separator allows for ball joint removal without damage to boots and other parts that fork-type removers may cause.

5PCS Ball Joint Separator Tie Rod End Remover Pitman Arm Puller Service Splitter Removal Tool Kit

A: Ball Joint Separator - Used for separating the ball joint from the spindle support arm on domestic and import front wheel drive vehicles adjustable for different size ball joints.

1-1/8" & 2-1/8" (30 & 56mm) maximum opening capacity, 7/8" jaw spread, 2-1/4" throat depth

B: Conical Pitman Arm Puller - Designed to fit pitman arms on compact and intermediate cars.

3/4-16 x 4-3/4" forcing screw

C: Pitman Arm and Tie Rod End Puller - Used as a pitman arm remover for many small, domestic rear wheel drive vehicles, or as a tie rod end puller for many domestic and import vehicles.

1-1/8" jaw spread, 2-1/8" throat depth

D: Pitman Arm Puller - Handle nearly any pitman arm job on passenger cars and light trucks which features special forged jaws shaped.

1-11/32" jaw spread, 2-1/2" throat depth

E: Tie Rod and Ball Joint Remover - Remove a wide range of tie rods and ball joints from a variety of cars, trucks, SUVs and heavy-duty vehicles.

0 to 2-1/2" jaw spread, 3-1/4" throat depth

Wide Application

5 pullers fits hundreds of makes and models including most American, European and Japanese makes/models, perfects for most compact cars, mid-size cars and light pickup trucks.

Premium Quality

The drop forged construction and is heat treated for strength and durability which resists rust and corrosion.

Easy Storage

All-in-one Tool Set in a heavy-duty blow-mold case with handle and latches for secure storage, simple organization and easy transportation.

• YSTOOL front end service tool set adopts robust 45# steel construction, with high-strength and deformation resistance features, can stand high intensity extrusion. The stout forcing bolts surface adopts black oxidation treatment to prevent rust, grease the bolts up before using for smooth operation and protect the bolt thread, grease them up after using for better preservation.
• This ball joint puller kit includes 1x ball joint separator, 1x tie rod end and ball joint remover, 1x conical pitman arm puller, 1x pitman arm and tie rod end puller, 1x pitman arm puller, and all the 5 tools are organized in a red blow molding case for easy storage and transportation. The 5PCS remove tools use C-shape, jaw shape and teardrop shape design, very simple, but can seat on the ball joint position tightly and provide very effective grip to fix the pullers.
• According to your ball joint choose the compatible puller, insert the puller into the ball joint opening, aim the bolt at the ball joint, turn the bolt by using the right size ratchet wrench, squeeze the ball joint out. These ball joint pullers can easily remove the stubborn ball joint, pitman arm, idler arm, tie rod end, steering linkages and steering boxes on front suspension and steering system, and will not damage boot/sleeve and other parts.
• Ball joints require regular maintenance and replacement on average 75,000 to 150,000 miles or it may cause inconvenience and even safety hazards such as steering failure, instable driving and ball joint fracture. YSTOOL front end service tool kit is a necessary tool set for replacing ball joints, widely uses for most imported and domestic minicar, compact car, mid-size car and light pickup truck. May not fit for most full-size car, mid-size and heavy-duty pickup, mid-size and heavy-duty truck.
• Your satisfaction and recognition are always what we pursue. Within one month from the date of purchase, the product can be returned unconditionally if it is complete and without any damage. Within one year warranty period, any quality issue with the product, you are promised to exchange or refund the problematic parts for free. Please contact us to resolve any issues during your use before leaving any feedback.

Product features

Package List

• 1x Ball joint separator
• 1x Tie rod end and ball joint remover
• 1x Conical pitman arm puller
• 1x Pitman arm and tie rod end puller
• 1x Pitman arm puller
• 1x Red case

Wide Usage

Ball joints require regular maintenance and replacement on average 75,000 to 150,000 miles or it may cause inconvenience and even safety hazards such as steering failure, instable driving and ball joint fracture. YSTOOL front end service tool kit is a necessary tool set in your garage for removing the stubborn ball joint, pitman arm, idler arm, tie rod end, steering linkages and steering boxes on front suspension and steering system, and will not damage boot/sleeve and other parts.

Compatible with most imported and domestic minicars, compact cars, mid-size cars and light pickup trucks. May not fit for most full-size cars, mid-size and heavy-duty pickup, mid-size and heavy-duty trucks.

Ball Joint Separator

• This separator with 7/8" jaw spread, 1-3/4" throat depth and 1-1/16" & 2-1/8" (26 & 53mm) jaw opening.
• Apply to domestic and import front wheel drive vehicles, to separate multisize ball joint from spindle support arm.
• The design of press-type can separate ball joints without damaging the boots.
• Work with 21MM ratchet wrench.

Tie Rod End and Ball Joint Remover

• This universal puller tool with 0 to 2-1/2" jaw spread and 3-1/8" throat depth, has adjustable swing arms
• Designed to remove multisize tie rods and ball joints.
• Wedge shape jaw makes it easier to insert into the ball joint opening.
• Work with 17MM ratchet wrench.

Conical Pitman Arm Puller

• This puller with 3/4" jaw spread
• Apply to pitman arms on minicars, compact & mid-size cars, and light-duty trucks.
• Conical design allows this tool to be installed on pitman arms firmly.
• Work with 18MM ratchet wrench.

Pitman Arm and Tie Rod End Puller

• This puller with 1-1/8" jaw spread, 2-1/2" throat depth
• Designed to work as pitman arm remover on most small rear wheel drive vehicles and also can be used as a tie rod end puller for most small domestic and import cars.
• Work with 19MM ratchet wrench.

Pitman Arm Puller

• This puller tool with 1-3/8" jaw spread and 1-7/8" throat depth
• Fit pitman arms on minicars, compact & mid-size cars, and light-duty trucks.
• Work with 17MM ratchet wrench.

Product description

100% Brand New.



Material: Forged Alloy Steel



Color: Silver and Black



Compatible Brand: Universal



Category: Tools



Quantity in Kit: 5PCS



Item Includes:1 x Pitman Arm/Tie Rod End Puller, 1 x Ball Joint Separator, 1 x Pitman Arm Puller, 1 x Ball Joint/Tie Rod End Remover, 1 x Tie Rod/Inner Bearing Race Puller, 1 x Carrying Case



Easy Removal of Most Types of Pitman Arms, Tie Rods and Ball Joints.



Press Type Ball Joint Separator Allows for Ball Joint Removal Without Damage to Boots and Other Parts.



Package Content: 1 x 5PCS Tools Kit

• Professional front end service tool set makes it easy to separate pitman arms, tie rods, and ball joints without damage.
• Total 5 units tools are in different shapes and sizes, can remove even the most stubborn ball joints/ tie rods/ pitman arms.
• Made of heat-treated alloy steel, with great strength and durability, offering 1 year warranty.
• All tools were packed in a convenient ABS carrying case for easy storage and transportation.
• List: 1x ball joints separator, 2x C-shape small/ large pitman arms puller, 2x tie rods remover.

Product description

About A ABIGAIL Ball Joint Press & U Joint Removal Tool Kit

A ABIGAIL Heavy Duty Ball Joint Press & U Joint Removal Tool Kit is made of heavy-duty forged steel with a black-oxide finish on adapters for maximum strength and longevity which resists rust and corrosion, perfect for professional machinists.

Fit most American domestic and imported 2-wheel drive (2WD) and 4-wheel drive (4WD) cars and light pickup trucks that have press-fit type ball joints

Features:

Universal joints and truck brake anchor pins.

It will also remove the rusted and corroded parts.

Excellent for removal and installation of press-fit parts such as ball joints.

4 in 1, 4 wheel drive ball joint remover/installer kit perfect for 4WD ball joint service/repair.

Package includes:

1 "C" Frame Press

1 "C" Frame Screw

1 Install Adaptor

1 Remover Adaptor

1 Center Plug O.D. 7/8"

3 Receiving Tubes In Sizes 2-1/4" X 3", 1-3/4" X 2-1/2", And 1-3/4" X 2"

1 Receiving Tube O.D. 2-1/2", I. D. 2-1/4" Length 3/4"

Receiving Cap Adaptor O.D. 2-1/4", I. D. 2" Length 2"

Remover Installer O.D. 1-7/16", I. 3/4" Length 1"

Receiving Cup O.D. 2-1/2", I. D. 1-1/4" Length 1-1/2"

Receiving Tube O.D. 2-3/4", I. D. 1-7/16" Length 2-1/4"

Receiving Tube O.D. 3", I. D. 2-3/4" Length 2-1/4"

Receiving Cup O.D. 2-1/4", I. D. 2" Length 2"

Receiving Tube O.D. 2-1/2", I. D. 2-1/4" Length 2-3/4"

Installing Cup O.D. 2", I. D. 1-3/4" Length 2-5/16"

Receiving Cup O.D. 2-7/8", I. D. 2-5/8" Length 3-7/8"

Receiving Cup O.D. 2-7/16", I. D. 2-3/16" Length 3-3/16"

Install Cup O.D. 2", I. D. 1-3/4" Length 3"

• ESSENTIAL TOOL FOR BALL JOINT SERVICE - Use 21 PCS Ball Joint Press Set Ball Joint Tool / Bushing Removal Tool with multi-size adapter to effortlessly remove press fit parts including ball joints, U-joints, brake anchor pins, and more on most 2-wheel drive (2WD) and 4-wheel drive (4WD) vehicles without removing the control arm from the vehicle.
• Works on most GM, Chevy, and Dodge 2 and 4 wheel drive pickups, vans and sport utility vehicles, will service perfect for vehicles having the Dana 28, 30, 35, 44, 60 axle.
• All-in-one Tool Set, comes in a heavy-duty 24” x 19.69” x 4.72” inch blow-mold case with handle and latches for secure storage, simple organization and easy transportation.
• Built to last with heavy-duty forged carbon steel with anti-rust black-oxide finished adapters for maximum strength and longevity that resists rust and corrosion.
• Package includes: 9x Adapters, 1x Center Rod, 1x C-Frame, 1x Install Adapter, 1x Install Cup, 1x Install Cup Adapter, 1x Receiving Cup, 3x Receiving Tube, 1x Removal Adapter, 1x Screw, 1x Sleeve