9 best tool for toyotas

Product description

Removes & installs Fuel Tank Lid on many Toyota & Lexus vehicles from 2004 & up. 9-slot design with 173mm OD & 143mm ID. Use with 3/8" square drive or 3/4" hex drive tools. California Prop 65 - Warning, This product contains chemicals known to the State of California to cause cancer, birth defects or other reproductive harm.

• Removes & installs Fuel Tank Lid
• Works on many Toyota & Lexus vehicles from 2004 & up
• 9 slot design with 173mm OD & 143mm ID
• 3/8" square drive
• Bright finish
• WARNING: Many Corollas have over-tightened rings. The use of this tool with impact tools or breaker bars will damage the #1044 and/or housing. Use alternative methods for removal if the ring is over-tightened.

User questions & answers

Question:	Is the socket on the top for a 3/8 Or 1/2 inch ratchet?? All of the tools are 1/2 but I’m just confused on why this says 3/8 in the description
Answer:	is 3/8 You can use with 19 mm socket 1/2 inch
Question:	What is the tool made of? Hopefully steel
Answer:	It is steel. Fits lock ring very good. Works better than Toyota special tool. Money well spent. Canadian corollas you will still have issues with and have to cut lock ring. A must have for these fuel pump recalls
Question:	Will this work with the 2013 scion tc fuel tank
Answer:	CTA Tools #1044 Toyota/Lexus Fuel tank wrench has a wide range of applications, but unfortunately it is not in our list.
Question:	Why did they change the price went up beyond pissed was going to order one on one day then the next day went to finalize it it went up why is this
Answer:	The real answer to your question is because Toyota recently released a massive recall on their fuel pumps and Toyota technicians everywhere are buying this tool now to do the recalls.

• 【Upgraded Version of TS408, 2021 Newest】TS501 TPMS Tool can diagnose newest models up to 2020 with frequent updates. It packed ALL TPMS service options: TPMS programming(MX-Sensors), sensors Relearn/Activation, TPMS Reset and TPMS health diagnose, read sensor data, key fob frequency test. Please send VIN to : ❤Autelonline @outlook.com❤ CHECK COMPATIBILITY.
• 【TPMS Programming】 TS501 TPMS Programming Tool enables all car enthusiasts to program sensor data to Autel MX-Sensors with ease, saving you the money and trip to a dealership. With TS501, you can program AUTEL MX-Sensor (315/433MHz) with 4 programming options: Copy By Activation, Copy By Manual Input, Auto Create and Copy by OBD( Not available with TS408) to replace the faulty sensor with low battery life or one that is not functioning well.
• 【Relearn All TPMS Sensors】TS501 has added Relearn by OBD comparing with TS408. To turn off the TPMS warning light after replacement, you need to relearn the sensors to the vehicle! Autel TS501 TPMS Relearn Tool provides 3 ways of on-tool relearn precedures to relearn both OE and aftermarket sensors: Stationary Relearn, Automatic Relearn & OBD Relearn.
• 【Activate All-Known Brand Sensors】As a new generation of TPMS diagnostic & service tool, Autel TS501 TPMS Reset Tool can wirelessly activate all OEM/Universal TPMS sensors on the market, enables you retrieve TPMS sensor data like Sensor ID, Tire Pressure, Tire Temperature, Sensor Battery, Sensor Position, Frequency, etc at ease. TS501 can diagnose the TPMS system through OBDII connection to read and clear codes.
• 【Lifetime Free Updates & Data Review & Printing】Autel TS501 comes with LIFETIME FREE frequently released updates to support newest car models. TS501 comes with Data Review & Data Printing functions, you can review the data recorded or print out the diagnostic report for further analysis and accurate repairs. TS501 supports Mulyiple languages. Please send SN to ❤Autelonline @outlook.com❤ if you need change language.

User questions & answers

Question:	Can you use this to program 2007 Toyota tundra oem sensors? My old ones went out, i already bought new oem sensors
Answer:	Yes,there isn't enough room to completely say low battery they shortened it
Question:	Regarding key fob, does this program key fob
Answer:	yes,my dear friends, it will works on your car well ,and all of our products has one year warranty ,any quetsions,please feel free to contact us([email protected])
Question:	Does it have a service bleed function for the brake control module
Answer:	Advertised to work on GM. Used it on my 2013 Silverado with after market GM TPMS sensors. Worked great. Hope this helps.
Question:	will this work on a 2007 honda crv
Answer:	I don't know. I bought it for my 2013 Malibu. If your close by to me, I can try mine on your H3 and you'll find out.

Product features

Autel Maxitpms TS501 Capable of Wirelessly Diagnosing TPMS Problems

• Programs vehicle ECU to learn sensor IDs and positions
• Activates magnetic, frequency and tire deflation triggered sensors using 125 kHz continuous or modulated wave signals
• Receives 315 MHz, 433 MHz and 309MHz signals
• Reads sensor ID from vehicle ECU
• Reads/clears codes of TPMS system and resets malfunction indicator light
• Simplifies the diagnostic process including four and five wheel
• vehicles by showing vehicle graphs
• Decodes sensor data and provides visual and audible
• responses to confirm sensors are working properly
• Interprets data including sensor ID, tire pressure, temperature,
• battery status and OE part no.
• Pre-selection process offers faster activation and diagnostics

Easy To Use Software Operation

Performing a basic sensor activation or complex diagnostic tool functions, is easy as following the program options and on-screen display instructions. The TS501 provides code definitions and visual / audio responses to make the operations much easier and more convenient to complete.

Download FREE software updates for enhanced diagnostic functions and extended vehicle coverage. Now even your old TPMS tool can perform like new!

OBDII Connected TPMS Diagnostics

The TS501 can provide relearn procedures for specific sensors and connect with the OBDII cord to the vehicle's ECU to offer multiple programming options including clone sensor IDs, or auto create ID, or manual write sensor IDs with no sensor re-learn required for sensor positioning.

At-A-Glance TPMS Status Screen

The single screen organization allows you to easily read direct feedback from all 4 sensors, clearly understand the status of all TPMS features, compare sensor and ECU data, then instantly pinpoint system faults to identify the fix. This At-A-Glance view of all sensor information easily shows the location of which sensor battery is low and needs to be replaced soon.

Product description

The Best Oil Filter Wrench for Your Toyota, Lexus, and Scion Vehicle.

This oil filter wrench offers the best fit, the best finish, and the best overall quality and will last the life of your vehicle. Don't be fooled by cheap imitations, get your professional quality Motivx Tools oil filter wrench today.



Why the Motivx Tools Oil Filter Wrench is Better

-We only use high quality 6061 T5 aluminum to construct our wrenches as opposed to lower cost, lower quality materials.

-Our wrenches are forged into shape under extreme pressure resulting in a very durable tool that will last the life of your vehicle. Most Toyota oil filter wrenches, while similar in appearance, are made of cast aluminum. Casting aluminum is much less expensive than forging but the result is a significantly weaker tool more prone to cracking and failure.

-Our wrenches are designed not only to engage the 64mm ring on the top of the oil filter housing, but the tabs below as well. This increases the contact area of the wrench on the housing decreasing the chances of stripping the plastic cap.

-Our Toyota oil filter wrenches are finished with a beautiful black anodized finish which isn't just for looks. It helps protect the aluminum from corrosion, makes clean-up after your oil change a breeze, and will never chip or peel like paint or other coatings.



Application Information

This oil filter wrench is a perfect fit on all 2.0L to 5.7L in Toyota, Lexus, and Scion vehicles that use Toyota oil filter 04152-YZZA1, 04152-YZZA4, and 04152-YZZA5 including the new 2GRFKS 3.5L Tacoma and 8AR-FTS 2.0L in the NX200t and RC200t. It does not fit the 1.8L engine or vehicles that use disposable spin-on style oil filters.

• Perfect Fit - This 64mm 14 flute oil filter wrench fits all Toyota, Lexus, and Scion vehicles equipped with 2.5L to 5.7L engines that use Toyota's cartridge style oil filter system. This wrench does not work on vehicles with traditional canister filters that you unscrew and throw away and does not fit the 1.8L engine oil filter cap.
• Built To Last - Toyota oil filter caps can be extremely tight causing tremendous pressure to be put on the wrench. That's why our Toyota oil filter wrenches are forged from high quality 6061 T5 aluminum so they won't crack like cheaper cast aluminum or flex and damage the plastic cap like stamped steel versions.
• Excellent Finish - Our oil filter wrenches are not only built tough, but the surface is treated with a high quality black anodized finish to prevent corrosion and theyre laser engraved with the Motivx Tools logo.
• Professional Quality - Motivx Tools is a family owned and operated specialty tool company located in the United States and we take great pride in our products. These oil filter wrenches are made to our stringent specifications in Taiwan with a fit and finish you won't find anywhere else, and are backed by a 1 year warranty and excellent customer service.
• Purchase With Confidence - Buy our Motivx Tools oil filter wrench knowing it's a perfect fit, excellent quality, built to last, and most importantly we stand behind our products.

User questions & answers

Question:	Will this work on a 2017 Tacoma ? Vehicle match says it wont fit
Answer:	There have been some issues with the search function regarding specific trim levels, if your 2017 Tacoma has a 2.0-5.7L engine and uses a canister filter, then this is the wrench for you
Question:	Will this fit 2006 lexus is250 awd
Answer:	If your 2006 Lexus i250 has a 2.0 to 5.7Liter engine with a 64mm cartridge style oil filter system it will fit.
Question:	Will this fit 2017 4Runner
Answer:	Yes this will fit your 2017 4Runner. -Motivx Support
Question:	What is the size of the drive? (the square whole in the middle
Answer:	The square drive is 3/8" and the hex is 27mm / 1-1/16". -Motivx Support

Product description

-For Toyota Lexus Scion Type Oil Filter Housings -Spec: 64mm 14 Flute (Measured across the flat) -Material: Chrome Vanadium -Finish: Polished Chrome -Forged and machined to specification, not die cast aluminum or stamped metal like all others that you see will definitely remove the most stubborn or overtightened oil filter cap. -Good for 4, 6, and 8 cylinder engines Toyota, Lexus, Scion -1/2" square drive or 24mm / 15/16" hex

• 64mm 14 Flute (Measured across the flat)
• Remove the most stubborn or overtightened oil filter caps
• Chrome Vanadium Polished Chrome
• Good for 4, 6, and 8 cylinder engines Toyota, Lexus, Scion
• Forged and machined to specification, not die cast aluminum or stamped metal like all others

User questions & answers

Question:	Does this get stuck to the aluminum filter housing like the aluminum tools do
Answer:	Nope, the chrome finish keeps it from getting stuck on the housing. I use it on camrys, corollas, 4runners and tundras. Works perfectly!
Question:	What country is this made
Answer:	Taiwan
Question:	Will this tool work with the 2gr-fe 3.5 V6 engine
Answer:	Yes it will
Question:	I want to make sure, does this fit the toyota yzzf-1 spin-on filter? thanks
Answer:	Probably - but why guess? Measure your filter (or one in the store) - it is 64mm flat-to-flat ... get a little ruler if nothing else; 2.51 inches flat-to-flat; This is a VERY strong filter-wrench, it is the last one (of this size) that you will ever buy.

• Fitment - Compatible with engine model: (Toyota 1996 and later: 3.0 V6, 3.3 V6, 4.0 V6, 4.7 V8) or (4 cyl: 1983-1995 22RE, 1995-2004 2RZ & 1995-2004 3RZ) or (Lexus 1990 and later: 3.0 L6, 3.0 V6, 3.3 V6, 4.0 V8, 4.3 V8, 4.7 V8)
• Function - Easy to install or remove crank bolts on Lexus and Toyota engines.
• How to Use - Used with an inch drive impact wrench and a 22 mm impact sleeve to unscrew the crank bolt. When installing the pulley, you need to bolt the pulley fixing tool to the pulley using the two bolts provided, insert the drive breaker lever into the tool, and align the breaker lever up in the engine compartment, then tighten the crank nut.
• Material - Made of steel with high quality,resisting rust and impact.
• Great Service Support - Our offer comprehensive pre-sales and after-sales service for this tools.If you have any questions,please contact us right now.

User questions & answers

Question:	Will it works for 1996 land cruiser
Answer:	Should it says it does in the vehicile description. Worked on my 02 4 runner It says 90 and above Lexus 3.0 liter all the way to 4.7 liter . 95 to 04 4cylinder and 6 cylinder Toyota like mine.
Question:	does this work with the 2tr-fe 2.7l for 2nd gen tacomas
Answer:	It worked on mine 02 4runner, if it says it works on the vehicle description it usually works. 1995 4cyl and 6cyl until 2004 and the 4 liter also 4.7 liter v8 .
Question:	Will this work for 1996 land cruiser
Answer:	Yes
Question:	Does anyone know if this will work for on the 5.7L Tundra
Answer:	It is too small.

Product features

Fitment

• Toyota 1996 and later: 3.0 V6, 3.3 V6, 4.0 V6, 4.7 V8.
• Lexus 1990 and later: 3.0 L6, 3.0 V6, 3.3 V6, 4.0 V8, 4.3 V8, 4.7 V8.
• 4 cyl: 1983-1995 22RE, 1995-2004 2RZ & 1995-2004 3RZ.

-How to Use

Used with an inch drive impact wrench and a 22 mm impact sleeve to unscrew the crank bolt. When installing the pulley, you need to bolt the pulley fixing tool to the pulley using the two bolts provided, insert the drive breaker lever into the tool, and align the breaker lever up in the engine compartment, then tighten the crank nut.

Product description

Services high-torque locknuts on Toyota 4WD vehicles having free-wheel (lock out) hubs: Tacoma (1995 and newer); T100 and 4Runner (1996 and newer).

• Improved Design with Solid Pins for Increased Durability
• Applications: Tacoma (1995 and newer); T100 and 4Runner 4WD (1996 and newer)
• Allows for Easy Removal and Installation of Locknut
• Prevents Damage to Locknut
• 1/2" Drive

User questions & answers

Question:	Is this tool work on tundra 08 2wd from wheel
Answer:	Not sure about 2008. Worked on my 2002 and most parts are interchangeable for 2002-2006 Toyota Tundra models.
Question:	Does this have warranty
Answer:	Sorry, not sure...
Question:	What are the outer and inner diameter of this tool
Answer:	2 3/4" outside, 2 1/8" inside. Center of pin to pin is 2 3/8". Hope this helps...

Product description

Wanna Save Energy and Time When Removing and Installing the Crank Bolt ?

Sunluway tool is a lifesaver if you work on engine timing belts or just need to remove the crankshaft pulley.



Fitment:(Please verify your car model and year before purchase)

Fit for Lexus 1990 and later: 3.0 L6, 3.0 V6, 3.3 V6, 4.0 V8, 4.3 V8, 4.7 V8

Fit for Toyota 1996 and later: 3.0 V6, 3.3 V6, 4.0 V6, 4.7 V8

Fit for 4 cyl: 1983-1995 22RE, 1995-2004 2RZ & 1995-2004 3RZ



Material:

Heavy duty steel holding tool and bolts with washers, allow the 280 pounds of torque to be attained



Feature:

1.Factory specifications require up to 280 pounds of torque to seat the pulley properly, and our tool allows the factory torque to be attained.

2.Hole in the center of holding tool allows access to the removal of crank shaft bolt.

3.Low profile design, no need to remove radiator or other components to access and remove Harmonic Damper Pulley.

4.Offset breaker bar attachment point allows easy removal and replacement of crank shaft bolt to factory torque specifications.



Package includes:

1*Harmonic Damper Pulley Holding Tool

2* bolts & 2 washers



Buy it with confidence ! You Won’t Regret to Get Sunluway Harmonic Damper Pulley Holding Tool!

• Fitment: Fit for Lexus 1990-later: 3.0 L6, 3.0 t V6, 3.3 V6, 4.0 V8, 4.3 V8, 4.7 V8. Fit for Toyota 1996-later: 3.0 V6, 3.3 V6, 4.0 V6, 4.7. Fit for 4 cyl: 1983-1995 22RE, 1995-2004 2RZ & 1995-2004 3RZ
• Application: Help to remove and install the crank bolt on engines, so the removal of extremely tight bolt is no longer a trouble
• Superior Quality: Constructed from high quality 40Cr steel to provide enough strength and durability, this tool's powder coating is resistant to cracking, abrasion, rust and damage due to chemical exposure
• Easy To Use: Use with a inch drive impact wrench and a 22 MM impact socket to spin out the crank bolt. When installing the pulley, you need to bolt the Pulley Holding Tool to the pulley with the two provided bolts, plug a drive breaker bar into the tool and orient the breaker bar up inside the engine compartment, and then torque the crank nut
• Satisfaction Guarantee: If you're not 100% satisfied with Sunluway Holding Tool, simply return it for a full refund in 30 days. Premium Support & 12 Months’ Warranty

User questions & answers

Question:	Why isn't this tool notched at each 90 degrees instead of just at 180 degrees? It doesn't look like it will fit deep enough
Answer:	It doesn’t need to be notched at 90-degrees. Your crank pulley only has two bolt holes in it for this exact purpose. I just did the timing belt and water pump on my 2005 GX470, and it fits perfectly.
Question:	Will this fit my 2006 toyota tundra with the 4.7 2uz-fe motor
Answer:	I believe it will. It fit a 2JZGTE without issue. Even the bolts that came with it worked fine.
Question:	Will is work on a 2003 lexus is
Answer:	Yes
Question:	Will this work on a 2005 Toyota Sequoia
Answer:	Yes.

Product description

Replace a damaged or missing spare tire jack handle and wheel lug wrench with this direct replacement. Made of tough, durable materials, this tool is made to the original equipment dimensions and finished to prevent corrosion.

• Ideal replacement - this spare tire jack handle and lug wrench matches the original part on specified vehicles
• Durable construction - made of tough, durable materials and coated with corrosion-resistant finish
• Cost-effective solution - offers original equipment quality at competitive price
• Quality tested - this part has undergone dimensional and material testing to ensure a quality fit and long service life
• Ensure fit - to make sure this part fits your exact vehicle, input your make, model and trim level into the Amazon Garage

User questions & answers

Question:	Is this computable with a 1997 toyota 4runner limited 4wd
Answer:	Sorry Dorman doesn't list one for this vehicle.
Question:	Hi, fit for toyota sequoia
Answer:	Sorry Dorman doesn't list one for this vehicle.
Question:	will this fit a 2003 tacoma
Answer:	Sorry Dorman doesn't list one for this vehicle.
Question:	Will it fit a 2004 Toyota Tacoma
Answer:	It did work on my 2004 Tacoma. I think there might be some variance on the piece that brings the spare down but mine was just a slotted cylinder that the hook fit snugly into it.

• This aluminum cup wrench is a perfect removal tool for Toyota, Lexus, and Scion vehicles equipped with 2.5L to 5.7L engines that use Toyota's cartridge-style engine oil filter housing, while it does not fit the 1.8L engine or vehicles that use disposable spin-on style oil filters
• This extended life oil filter wrench is forged from high quality 6061 T5 aluminum, which can bear tremendous pressure when you unscrew the extremely tight Toyota oil filter caps; built to last and won't crack easily
• The surface of this oil filter wrench is treated with high quality black anodized finish to prevent corrosion
• There are 4 slots on the bottom edge, which are mated perfectly with the tabs on the Toyota 15620-31060 oil filter cover and helps prevent slippage when you unscrew the oil filter housing with tremendous strength by a socket wrench or adjustable spanner
• What you will get are 1 metal cup wrench for removing oil filter and 100% satisfaction customer care

User questions & answers

Question:	Will this fit 04 mini cooper 1.6l
Answer:	No - this is for Toyota/Lexus; also never buy a powder formed tool, use cast or steel.
Question:	Doe it fit 2016 lexus gx
Answer:	Yes, it’s designed to fit the cartridge style oil filter housings used in the 2.5L to 5.7L Toyota, Lexus and Scion engines. Your vehicle has the 4.6L V8.
Question:	Will this work for Honda filters for a Honda Crv
Answer:	No, but you can try this one: https://www.amazon.com/dp/B07BHJ7NG5
Question:	will this oli filer wrench fit a 2016 rav 4 le 2.5L
Answer:	Yes, it will fit 2006 - 2017 RAV4 with the 2.5L 4 cylinder engine.

Product features

LIAMTU Proper Tools for Oil Change Canister-style Oil Filter Cap Removal or Spin-on Oil Filter Removal

• OFW03

64mm 14 flute oil filter wrench for cartridge style oil filter system on Toyota, Lexus, and Scion vehicles equipped with 2.5L to 5.7L engines, and used to remove Toyota 15620-31060, 15620-36020 and 15620-36010 genuine oil filter cap, doesn't fit spin-on oil filter.

• OFW02

64mm 14 flute oil filter wrench for cartridge style oil filter system on Toyota, Lexus, and Scion vehicles equipped with a 1.8L 4-cylinder engine, and used to remove Toyota 15620-37010, 15650-38050 genuine oil filter cap, doesn't fit spin-on oil filter.

• OFW01

74mm 14 Flute oil filter wrench for spin-on oil filter and some canister-style oil filter system on Mercedes Benz, Sprinter, Audi, Porsche, Volkswagen and Mazda vehicles

The best oil filter cap removal tools for Toyota Toyota, Lexus, and Scion vehicles equipped with 2.5L to 5.7L engines

used to remove Toyota 15620-31060, 15620-36020 and 15620-36010 genuine oil filter cap, doesn't fit spin-on oil filter.

Extended life oil filter wrench

forged from high quality 6061 T5 aluminum, which can bear tremendous pressure when you unscrew the extremely tight Toyota oil filter caps; built to last and won't crack easily

Instructions

1. to torque the wrench by using either a 27mm socket or a 3/8 inch ratchet, but if the oil filter cap is extremely over tightened we recommend using a 27mm socket to avoid stripping out the 3/8 inch opening.
2. follow the torque torque spec on manufacturers specification when re-tighten the cap so that you will not get trouble in the next time.

Purchase with Confidence

this wrench has passed thousands of times mechanical strength test and will perfect fit the oil filter cap.