12 best peak tech power inverters

Product description

This power inverter directly connects to a 12 volt battery for instant 115 volt AC power. Power televisions, electronics and other small appliances hassle-free! This power inverter produces clean, convenient power, keeping appliances active for hours. Whether you're powering the TV to watch the big game at the campsite or the boom box at the company picnic, this power inverter is a great portable power source.

User questions & answers

Question:	How do you charge these up? A charging cord didnt come with mine
Answer:	I'm not familiar with the insignia brand, but I can tell u that i have dropped the remote and it has worked so far
Question:	Will it handle a 30 amp load
Answer:	ATSC is not a brand but the standards used for digital tv (according to a google search). My converter brand is a Zenith
Question:	Does it need to be connected to the battery the whole time
Answer:	It works on our insignia box
Question:	Will it run a 15 to 20 watt guitar amplifier
Answer:	I have a Zenith DTT900 converter box. I dropped a previous remote, something broke and this is a replacement which works well
Question:	Does lettuce have a remote Inlet?, a phone jack
Answer:	My Insignia converter box is labeled NSDXA1. My remote failed and I bought a replacement HCDZ from Amazon last month. It Looked just like my old broken remote, which was labeled AKB36157101. I put in fresh batteries and it worked just fine. The new remote was labeled AKB36157102. It also turned my TV on and off. NO problems, no complaints. Very satisfied.
Question:	What is the input voltage range of this inverter
Answer:	Yes. Everything works the same except the ability to program the remote to turn on the television.
Question:	What are the Dimensions
Answer:	Please follow the instructions to troubleshoot issues related with your remote control: 1. Always use correct type of battery as illustrated inside the battery compartment of your remote control. 2. Remember not to mix old & new or different kinds of batteries together. 3. Check polarization (+ -) and then insert batteries. 4. Hold the Infrared LED pointing towards the phone camera/digital camera and press the power button. 5. If you see the Infrared LED glowing when viewed through the viewfinder of a digital camera or a mobile device then your remote control is functioning correctly. If you see no signals then the remote control may not be working. If the remote is defective, we would like to send a replacement without return . Waiting for your reply

• 3000W continuous 6000W peak true pure sine wave solar power inverter, as good as grid power, power backup for home power supply.
• Transfer 36VDC to 120VAC, 60Hz frequency, dual US outlets. Intelligent temperature control cooling fan. Earth connection for both PCB board and output. Digital LED display.
• High quality true copper inductance, filter the wave form, ensure the true pure sine wave AC output, safeguard your equipment. All big imported mosfets with strong driving capacity.
• The PCB thickness is 2.00mm, allow the stronger current floating on the circuit, increase the load capacity. High frequency transformer to transfer DC to AC , ensure the stable and full AC output
• Free standard battery cables and spare fuse for replacement. CE EMC approved

User questions & answers

Question:	Is there a better manual available for this item
Answer:	I think it is a pretty standard size, so if it looks right, it probably will fit. It fits my kenmore.
Question:	Hello, have anyone tested the capacity on this inverter? Will it work with a 36 volts LiOn battery bank
Answer:	Yes, I purchased this is a replacement attachment for the exact same vacuum that I have.
Question:	Can 2 inverters 120 volts be stacked so I get 240 split phase
Answer:	I do not have that same model number. Mine is 116.25615500. On mine, the pipe/wand button for the floor attachment is on the side of the wand. However, the floor brush has a hole on the side and also on the top, so it will fit on a wand with a side button or a button on the top of the wand. Hopefully, that will be helpful.
Question:	Does this unit offer true 110-120V between Ground and Hot? or is it split 50-60v per leg
Answer:	I don't know. It didn't work on my 103b. So I don't know if it is my machine now.

Product features

Multiprotect Technology

Lightweight design with 7 kinds of protection systems: high voltage input cut off protection, low voltage alarm protection, overload protection, over current protection, surge power protection, reverse connection protection and short circuit protection by fuse.

Safeguard you and your devices

Multi-Device Powering

Digital LED Displays, show dc and ac voltage, let you know the condition of your inverter clearly.

Dual US outlets,provide power for small home appliances.

Terminal block,choice for high-power appliances( red with hot line, yellow with ground line, and black with neutral line).

Right For An Off Grid System

Easily moved to different vehicles with quick connects.

Plug directly 12 volt DC battery and generate the power needed to power your laptops,TVs,

lamps,fans, cameras,ovens,coffermakers,

and other electronics in your RV/Home/Office .

Push out plenty of power for your needs

Specification

DC input: 36V

DC input range: 30V-45V

No Load Current Draw: 1A

AC output: 120V

AC Regulation: 3%

Frequency: 60Hz

Socket: 15A USA type

Over Voltage Shut Down: 45V

Low Voltage Alarm: 29.5V-31.5V

Low Voltage Shut Down: 29V-31V

Product details

Model: WZRELB-300036

Continuous Power: 3000 Watt

Peak Power: 3000 Watt

Weight: 13LB

Size: 17.5in × 9.45in × 3.7in

Product description

AIMS Power PICOGLF40W12V240VS 12 Volt Pure Sine Inverter Charger 120/240, 4000W low frequency inverter, 12000W surge for 20 seconds 300% surge capability, 120/240 Vac output Split Phase, Battery Priority Selector, Terminal Block

AIMS Power PICOGLF40W12V240VS 12 Volt Pure Sine Inverter Charger 120/240, 4000W low frequency inverter, 12000W surge for 20 seconds 300% surge capability, 120/240 Vac output Split Phase, Battery Priority Selector, Terminal Block

Key Features

• 4000W low frequency inverter
• 12000W surge for 20 seconds 300% surge capability
• 120/240 Vac output Split Phase
• Battery Priority Selector
• Terminal Block
• Marine Coated and Protected
• Multi Stage Smart charger 115 Amp
• Remote panel available
• Auto frequency
• 10msec typical transfer time
• Selectable 25W power save mode (hibernation)
• 7 battery type settings for charger
• 40 amp automatic transfer switch
• Over Charge Protection Shutdown 15.7V
• Selectable Charge setting based on battery type
• Adjustable charge current off-20%-100%
• Four Stage Smart Charger

Specifications

• Output Waveform: Pure Sine/Same as input (Bypass Mode)
• Nominal Efficiency: >88% (Peak)
• Line Mode Efficiency: >95%
• Output Frequency: 50Hz +/-0.3Hz / 60Hz +/-0.3Hz
• THD: <10% DC
• Nominal Input Voltage: 12.0Vdc
• Minimum Start Voltage: 10.0Vdc
• Low Battery Alarm: 10.5Vdc-11.0Vdc
• Low battery Trip: 10.0Vdc-10.5Vdc
• High Voltage Alarm: 16.0Vdc
• Low battery Voltage Restart: 15.5Vdc
• Idle Consumption: 50W
• Power Saver Mode Idle Consumption: 21W
• Output voltage: Depends on battery Type
• Charger Rate: 115A
• Dimensions: 23.5" x 8.5" x 7.0"
• Weight: 64 lbs

• POWERFUL: 4000W continuous, 12000W surge for 20 seconds, 33 amps, 120/240VAC split phase pure sine clean power, low frequency, auto transfer switch and 115A smart battery charger for 8 different battery technologies including lithium.
• PROTECTIONS: Overload, over temp, high voltage, low voltage, short circuit, internally fused, low and high voltage alarm, cooling fan, and isolated ground neutral.
• FEATURES: AC direct connect terminal block, charge current control dial, dip switches to set priorities, auto gen start, conformal coated, power save mode and battery temp sensor. Only one set of cables needed. Optional remotes available.
• APPLICATIONS: Ideal for applications going back and forth from shore/generator and inverter power automatically, offgrid and back-up power. Homes, boats, RVs, solar, mobile business & work trucks. 12 Volt more efficient and can use smaller cables.
• TRUST AIMS: Buy with confidence. In business for over 20 years. All tech and warranty support in Nevada.

Product features

AIMS Power 4000 Watt Pure Sine Inverter Charger 120 / 240 VAC

The AIMS 4000 watt low frequency inverter charger is perfect for most off grid systems, semi-trucks, 5th wheels, toy haulers or any remote location needing power. Providing 4000 watts of continuous, clean and reliable pure sine wave power, ideal for sensitive electronics and household appliances. If needed, this inverter has the capability of producing 12000 watts of total surge power for 20 seconds, for start up applications like refrigerators, computers, fans and microwaves (if running more than 12000 watt often, we strongly recommend purchasing a larger inverter).

This inverter boasts a 115 amp charger and automatic transfer switch. For use with shore power or generator power to recharge your batteries or as a back-up for your sump pump, medical equipment, lighting system or security and surveillance system.

This inverter uses 240 Volts AC power for charging batteries.

The AIMS PICOGLF Inverter Chargers are Marine, Military and Industrial grade.

Pure Sine Power for all of your devices

Pure Sine Inverters have a cleaner signal compared to Modified Sine that have a 'blocky' signal. Pure sine wave is like the power you get from your local power company and from some pure sine generators (most generators are not pure sine).

A major advantage of a pure sine wave inverter is that all of the equipment which is sold on the market is designed for a pure sine wave. This guarantees that the equipment will work to its full specifications.

Some appliances, such as LED lights and microwave ovens will only produce full output with pure sine wave power.

Audio equipment, satellite systems, and video equipment, will run properly using pure sine wave inverters.

Pure Sine Wave Inverters outperform all other types of inverters, regardless of use.

Optional Features

Remote on/off switch with lcd for aims pure sine inverter chargers - The remote monitors battery voltage, AC input voltage, AC output voltage, frequency and load percentage. The remote can be flush mounted into a dash, job box or anywhere for quick access to key information. (Part # Remotelf)

Battery temperature sensor - This allows careful monitoring of the batteries for extended life and longevity. The sensor plugs into the inverter and the other end is attached to the battery(s) and provides battery temperature information (Part # PICGLFBATS).

Auto generator start - The inverter can be customized to start-up a generator when the battery voltage goes low.

When the inverter goes to low battery alarm, it can send a signal to start a generator. The auto gen start feature will only work with generators designed to work with this feature.

Battery Charger

The AIMS Power 4000 Watt 12 VDC Pure Sine Inverter Charger w/12000W Surge is equipped with a powerful 4-step smart charger capable of charging at 115 Amps. This inverter uses 240 Volts AC for charging batteries.

The built in battery selector for this inverter works with Gel USA, AGM 1, AGM 2, Sealed Lead Acid, Gel EURO, and Open Lead Acid battery types.

The max charge current can be adjusted from 0%-100% via a liner switch to the right of the battery type selector. This will be helpful if you are using our powerful charger on a small capacity battery bank. Choosing '0' in the battery type selector will disable the charging function.

Automatic Transfer Switch

This inverter comes installed with an automatic transfer switch which will quickly transfer you to back up power in case of a power outage without you having to flip a switch. (10 ms max transfer time)

When utility AC power cuts off (or falls out of acceptable range), the transfer relay is de-energized and the load is automatically transferred to Inverter mode. Once the qualified AC power is restored the relay is re-energized and the load is automatically reconnected to AC bypass mode.

Easy Set Up and Technical Support

Easy to set up and use. This inverter comes with an easy to follow manual. Additionally, all customers who buy from an authorized AIMS dealer can contact the AIMS technical support team directly for any questions during set up.

AIMS Power will provide technical support for products purchased through an authorized AIMS Power Dealer. Not every Amazon seller is an authorized AIMS Dealer. Make good purchasing decisions.

Product description

As a venerable favorite among off-grid users, Wagon Tech's Pro Line series of power inverters have received a considerable makeover. Starting from the ground up, the new 10, 000 watt inverter received a new SMT circuit board, a glossy exterior coating on the smaller casing, and a massive weight reduction. The new SMT (Surface Mount Technology) circuit boards offer greater reliability, better efficiency, and fewer stray RF emissions over the older PCB (Printed Circuit Boards) and through-hole boards. From there the case volume shrunk almost 50% of the original, and the overall weight was reduced 48%! This makes for one efficient, reliable, beautiful, and lightweight 10, 000 watt inverter in a more compact size! On the front of the Pro Line 10, 000 Watt Inverter you will find the manually operated power switch (On/Off) as well as the jack for the remote power switch (included). 4 conveniently stacked 120V AC outlets capable of providing 1500 watts each are well spaced on the right side of the inverter. Just left of the AC outlets, you will find the LED Over-Load and Over-Temperature warning lights and the Voltage and Amperage level indicators. With the stout AC terminal block just below the Voltage/Amperage Level indicators, you can be certain that your investment is well protected. On the backside of the Pro Line 10, 000 Watt Inverter is the massive cooling fan, the Heavy Duty Solid Mount Positive (Red) Terminal, the Heavy Duty Solid Mount Negative (Black) Terminal, and the Ground-Neutral Bond stud with wing-nut. Both of the Terminals are now Heavy Duty Sold Mounts and come directly out of the case to make connections easier and to avoid the inevitable 90ᵒ bend that the cables make on traditional inverters; causing undue stress and making connections harder. The massive cooling fan is utilized to help keep the inverter cool and operating efficiently. The new Wagon Tech Pro Line Inverters; proving that the best can get better.

• 10, 000 watt, 20, 000 watt surge power, Modified Sine Wave
• 50% smaller & 48% lighter than previous models
• NEW Integrated SMT (Surface Mount Technology) circuit boards offer greater reliability, better efficiency, and fewer stray RF emissions over the older PCB (Printed Circuit Boards) and through-hole boards
• 4 AC outlets, high output AC terminal block, and heavy duty solid mount terminals, remote power switch included
• Built-in safety features: over-load, over-Heat, low battery, short-circuit and reverse polarity protections
• Fit Type: Universal Fit
• 24 months warranty

User questions & answers

Question:	Puede dar electricidad a la máquina de sof ice cream
Answer:	I am not sure but it works on a Kenmore canister - I think this is a pretty universal attachment and should fit most models.
Question:	Can two of these be connected to a distribution panel to attain 240 VAC
Answer:	This brush does swivel but I am not sure if it will fit your vacuum. I have a Electrolux central vacuum system and this brush fits it.
Question:	Can this run continuously for 24/7 or it's too much work for the equipment
Answer:	hi thereI bought this piece two times and had to return it because it does not fit. look out 4 the hole on the edge if it fits the hole on your machine. yes it has brush on bottom . i advise you to buy it from sears they have the same exact model # and the right exact replacements hope this help you
Question:	were can i get the 1000 amp fuse i need to install
Answer:	Yes, but the little hole for the metal button that latches the brush head onto the metal pipe M A Y be on the wrong side. You can drill another hole in the collar on the opposite side very easily.

Product features

ProLine 10,000 Watt Inverter

As a venerable favorite among off-grid users, Wagan Tech’s ProLine series of power inverters have received a considerable makeover. Starting from the ground up, the new 10,000 watt inverter received a new SMT circuit board, a glossy exterior coating on the smaller casing, and a massive weight reduction. The new Wagan Tech Pro Line Inverters; proving that the best can get better!

Front Components

On the front you'll find: Power Switch (On/Off), Remote power switch (included) terminal, 120V AC outlets x4, LED Over-Load and Over-Temperature warning lights, Voltage and Amperage level indicators, and the High Output Terminal block.

Rear Components

On the backside you'll find the massive Thermal cooling fan, Heavy Duty Solid Mount Positive (Red) and Negative (Black) Terminals, and the True Neutral-Ground Bond Terminal with wing-nut.

SMT Component Technology

The new SMT (Surface Mount Technology) circuit boards offer greater reliability, better efficiency, and fewer stray RF emissions over the older PCB (Printed Circuit Boards) and through-hole boards.

Reduced: Size & Weight

The aluminum shell casing volume shrunk 50% of the original, and the overall weight was reduced 48%! This makes for one efficient, reliable, beautiful, and lightweight 10,000 watt inverter!

• 120/240 VAC Split Phase,continuous 6000 watt low frequency inverter 110V/220Vac Split Phase, Peak 18000 watt
• Adjustable charge current off-0%-100%, Five Stage Smart Charger, 60A Max battery AC charger max For lifep04，Sealed Gel AGM Flooded Lithium, Sealed, Gel, and Flooded Batteries
• UPS AC output Switch Inverter load Rate 5-10msec transfer time,common household appliances will not power and restart.Remote panel available
• Working Mode(optional): 1.AC Input Priority; 2.Battery Prioritye; 3.ECO Mode; 4.Generator Mode; 5.Unattended Mode; High-definition LCD display,full-vision real-time monitoring data
• charging current and charging voltage can be adjusted;customizable voltage for low voltage protection and voltage for low voltage recovery.

User questions & answers

Question:	I have a 50amp RV with a 2 pole 50 amp breaker, can I run 1 hot to each pole with a center tap neutral and still be able to use all 6000 watts at 120v
Answer:	No, you’ll have to download the drivers and the OBD II scanning software from their website.
Question:	So this inverter is also a battery charger, charges your batteries when your on the grid
Answer:	This comes with a mini CD disk that has the USB drivers on it. If you want the latest drivers you can download them from FTDI's website www.ftdichip.com/Drivers/VCP.htm
Question:	buenas tardes, que tipo de bateria debo usar con este equipo
Answer:	I should since Mazda and Ford share the same platform. However I do not know for sure. It works fine on my 2014 Lincoln MKT.
Question:	Why does it not charge past 53.7 volts on ac priority mode? My charge limit is 56 volts and my solar panels can charge past 53.7 volts
Answer:	I only know that it didn't fit my vacuum cleaner and I have a Kenmore Progressive vacuum, model 116.21614010.

Product features

Product specification

110%-120% of output could be maintained for 30 seconds,then the output turn to bypass,and more than 160% maintain the 300ms.Intelligent speed control air cooling

Mains Charging Voltage is adjustable

DC 12V Inverter :13.6-14.9VDC

DC 24V Inverter :27.2-29.8VDC

DC 48V Inverter :54.4-59.6VDC

Parameter

AC input volatage range:85V-135V;

AC input frequency:60Hz(55-65Hz);

Ouput: Conversion efficiency ≥88%;

Ouput voltage:110VAC ±3%(battery mode); Output frequency:±0.5Hz(battery mode) ;

Output wave form:pure sine wave.

Toroidal transformer

High effecience,no load current 0.5A,Fast switching speed

Power tube

High-efficiency Power tube.Strong resistance to current and voltage impact

motherboad

The US imports DSP control chips,multiple high Q,high-flux inductances,new imported compenents,high-density motherboad desigh,MPPT tracking rate and higher power generation rate,up to 98%.

Product description

Go WISE power inverter is an advanced tool of power conversion. It can supply you with AC power converted from a DC power source. It can be used in cars, vessels, during camping and in power failure emergencies. Pure Sine inverters are a stable power source with 3000W continuous power and 6000W surge power with low harmonic distortion. This inverter is an excellent tool to use during power failure emergencies and s maximum efficiency with computers, sensitive equipment and more. Compact and portable, this inverter can be used on worksites, boats, cars, camping or for permanent use. The PS1004 features 5 kinds of protection systems: Thermal protection, Overload protection, Over Voltage protection, Under Voltage protection, Low Voltage protection alarm. Inverter also comes with an LED light that indicates the problem. Your purchase comes with black and red cables with ring terminals, a remote switch, an inverter with 3 AC sockets and 1 USB port 5V, and a detailed instruction manual. Cut off the load and keep it cool naturally for 10 to30 minutes. Restart it after it returns to normal temperature. The load power is too large and reduce the total load power to the range of rated power. Avoid blocking the vent and improve the ventilation condition. Reduce the ambient temperature.Outlet Sockets: 4 (3 AC, 1 USB)

• GoWISE Power PURE SINE Power Inverter 3000W Continuous/6000W Surge, 12V DC to 120V AC w/ Black and Red Cables w/ Ring Terminals, Remote Switch, 5 kinds of Protection Systems and 4 Output Sockets
• Ideal use in cars, vessels, and for power failure emergencies and s maximum efficiency with computers, sensitive equipment, and more
• 5 Protection systems: Thermal protection, Overload protection, Over Voltage protection, Under Voltage protection, Low Voltage protection alarm
• Total Harmonic Distortion (THD) <3%; Soft start low interference tech and temperature control cooling fan. Output Voltage: AC 120V; Frequency: 60Hz

User questions & answers

Question:	Has anyone dealt with the manufacturer? Are they easy to deal with? The 2000 watt unit has a lot of 1-star reviews, but this one doesn't. I wonder why
Answer:	Hi Keith, I saw your question and thought I'd tell you what I know. I bought a 1500 Watt / 3000 serge about a year ago and the only thing I had to deal with is I had to put bigger cables from my batteries to the inverter. the ones that came with it weren't big enough. I had some 2AWG cable leftover from hooking up my solar panels and used that to go from the batteries to the inverter. I haven't had any problems since. I hooked it to my refrigerator and freezer and a few other things. I have 4 /100 amp hour batteries with 6 / 100-watt solar panels. For me, it's a really good inverter. I'm thinking about getting the 3000 watts / 6000-watt serge and a few more batteries so I can hook up more stuff. I hope it works as well.
Question:	What are the true dimensions
Answer:	3 7/8 high 9/38 wide mounting flange to mounting flange 21 1/4 long from end of power screws to end of power recepticle. This is for the 3000 watt inverter.
Question:	I will be feeding this with 3 12v agm deep cycle batteries (100 amp-hrs each). will using this at 3000w harm my batteries? overheat them
Answer:	Highly recommend upgrading your cables from the what comes with it though if you plan on higher loads above 1500W. Also, make sure you have a suitable cable size (2 AWG or higher) to connect your batteries together. Just remember that your 100Ah batteries will really only get you about 50Ah each. It should be able to go from fully charged to minimum pulling a load if 1800W for about an hour (50Ahx12vx3), or a 100W load for about 16-18 hours. You'll lose a little bit in overhead and when you run it longer the overhead eats into you power availability.. If you have a constant load of 3000W, you'll only get a little above 30 minutes of use out of before your batteries will need recharging. Also @3000W , you'll be pulling 250 Amps (3000/12V) so you should be using at least 00 or 000 cables to connect the inverter.. Each battery will pull ~83A each so make sure that each battery can supply it.
Question:	Is the specs on this inverter true, tested pure sine wave capable of 3000w cont/6000w peak? Due to pricing seems to good to be true and over-rated
Answer:	I've run a 1500 Watt space heater along with a 360 Watt big screen TV using this inverter and it works just fine. Runs the batteries down pretty quickly though.

Product features

GoWISE Power 3000W Continuous 6000W Surge Peak Power Pure Sine Wave Inverter

This Power Tech-On Power Inverter can supply you with AC power converted from a DC power source. It is a stable power source with 600W/1000W/2000W/3000W/ continuous power and 1200W/2000W/4000W/6000W surge power with low harmonic distortion. Compact and portable, it can be used on worksites, boats, cars, camping or for permanent use. This inverter also includes black and red cables with ring terminals, a remote switch, an inverter with 3 or 2 AC sockets and 1 USB port 5V, 2000mA or 1000mA and a detailed instruction manual.

This Power Tech-On Technology PURE SINE Power Inverter is an advanced tool of power conversion. This power inverter can be used in cars, vessels and camping, and in emergency if power fails. It includes 5 Protection systems: Thermal Protection, Overload Protection, Over Voltage Protection, Under Voltage Protection, and Low Voltage Protection Alarm. The 5 protection systems comes with an LED light to indicate the problem.

• 1.This Pure Sine Wave Inverter is a combination of an inverter, battery charger and AC auto-transfer switch.GFCI socket ,low frequency,low Idle Current,BTS cable, remote control
• 2. Adjustable Charging Current: The max charge current can be adjusted from 0%-100% via a liner switch at the right of the battery type selector. This will be helpful if you are using our powerful charger on a small capacity battery bank.the liner switch can effectively reduce the max charging current to 20% of its peak.Choosing “0” in the battery type selector will disable charging function
• 3. AC/Battery Priority: Our inverter is designed with AC priority by default, when AC input is present, the battery will be charged first, and the inverter will transfer the input AC to power the load. the inverter can be easily customized to Battery priority via a DIP switch, When you choose battery priority, the inverter will invert from battery despite the AC input.
• 4. Auto Gen Start：the inverter can be customized to start up a generator when the battery voltage goes low.When the inverter goes to low battery alarm, it can send a signal to start a generator, and turn the generator off after battery charging is finished. The auto gen start feature will only work with generators designed to work with this feature.
• 5. Protections: AC input over voltage protection/AC Input low voltage protection/Low battery alarm/High battery alarm /Over temperature protection/Over load protection Short Circuit protection (1s after fault)/Back feeding protection

User questions & answers

Question:	Can I also attached my solar panels thru this item to charge my batteries
Answer:	Yes, the ¼"" NPT air steel fitting can be connected to an air compressor for vehicles, including truck, car, SUV, motorcycle, and bicycle. Hope this helps!
Question:	Is this inverter large enough to handle the starting load of a 3/4hp sump pump
Answer:	I have used mine yet, just received it. The one sheet manual didn’t have any instruction of deflating the tire but it indicates something called “Air Bleed Valve”. Based on that, I would say “yes”.
Question:	Can this be hardwired to an ac breaker panel? i don't see any output terminals other than the outlet. if so, what size wire can the terminal accept
Answer:	If you are talking about the external air filling stations, then NO. This is meant to be able to connect to an air hose, directly off an air compressor, using a quick connect fitting (That is included)
Question:	Is the quality of this as good as the more expensive aims version
Answer:	No, please do not use this product to inflate balls. It is only for tires. Hope this helps!

Product features

3000W Peak 9000W Pure Sine Wave Power Inverter DC 24V AC 120V With Battery AC Charger LCD Display

• * Low Frequency Pure Sine Inverter With Charger
• * AC/Battery Priority Selector
• * Automatically Generator Start
• * GFCI Socket, Safety and Convenient
• * The low freqency inverter can power all kinds of appliances
• * LCD Display, Remote Control, BTS including
• * Low Idle Consumption
• * Battery type settings for charger
• * Multi Stage Smart charger Max 40A, charger can be disable
• * 10msec typical transfer time

Inverter Output:

• Continuous Output Power: 3000 Watts
• Surge Rating: 9000 Watts (20 Seconds)
• Output: 120VAC, 60hz
• Output Wave: Pure Sine Wave (bypass mode)
• Typical Transfer Time: 10ms（MAX）
• Nominal Efficiency: >88%

DC Input:

• Nominal Input Voltage: 24.0Vdc
• Minimum Start Voltage: 20.0Vdc
• Low Battery Alarm: 21.0Vdc-22.0Vdc
• Low battery Trip: 20.0Vdc-21.0Vdc (select by SW1）
• High Voltage Alarm: 32.0Vdc
• Low battery Voltage Restart: 26Vdc
• Idle Consumption: 39 Watts
• Power Saver Mode Idle Consumption: 16 Watts

LED Indicator

Battery type Suitable: lithium LiFePO4, gel, AGM and lead Acid batteries. We recommend checking battery charging specifications for all batteries.

Charging Current Control: The max charge current can be adjusted from 0%-100%

LED Indicator:

• Over load trip
• Over temperature trip
• Charger on float/fast charger mode
• Inverter power on line,battery charger off
• Shore power on line battery charger active

Multi Functions

Auto Generator Start: The inverter can start up a generator when battery voltage goes low.Generator power should be 1.5 times higher than the inverter power.

Battery Temperature Sensor：BTS cable can monitor the batteries for extended life and longevity.

AC/Battery Priority: The AC Priority and Battery Priority switch is selected by SW5.

Remote Control: Comes with 33 foot connection cable, control the power on/off.

AC Wiring Method:

120V single phase

Input: Hot line+Neutral+Ground

Output: Hot line+Neutral+Ground

WARNING:

1.The output voltage of this unit must never be connected in its input AC terminal, overload or damage may result.

2.Always switch on the inverter before plugging in any appliance.

Product description

This item is brand new sealed in the box, great product

• Pure Sine Wave Power Inverter: Provides 3000watts continuous pure sine wave DC to AC power and 6000W of surge power, featuring 4 AC outlets and 1 USB port for multi-purpose charging. Support remote control: cable length 19ft, the long cable will help you control the inverter ON/OFF easily
• Widely Application: Ideal use in cars, vessels, and for power failure emergencies and guarantees maximum efficiency with computers, sensitive equipment, and more. 2.1A USB Charging Port great for fast charging iPod, smartphone and other electronic devices ,110V AC Outlet ideal for charging laptop, vacuum cleaner, printer, TV, Christmas lights, coffee maker, refrigerators, medical equipment etc.
• Low Interference: won't disrupt the reception of your TV, radio or audio equipment. More safe with Ground connection on the bottom. LED display: easy to see battery input voltage and output power
• Fully Safety Protections: This power inverter has over voltage, overload, over-current, under-voltage, overheating, short circuit protection. Durable metal housing provides advanced protection from drops and bumps. Integrated very silent cooling fan helps reduce heat and prevents short-circuit
• Warranty : you will get a full refund or a brand new replacement if you are not satisfied with it. Direct buy from professional manufacturer with 9 years experience in pure sine wave inverter only

User questions & answers

Question:	Can i run the full 3000 w through one connector, so i can connect it to a 30 amp rv hookup
Answer:	this reader is best for reading engine codes "check engine light", depending on the app you use it can read ABS codes. i have been able to read SRS on mine but it seems hit or miss for airbag codes, may be hardware related or due to the apps used i am not sure which. This reader also works well with fords through forscan
Question:	What is the size of the inverter
Answer:	Hello, this is version 2.1.
Question:	Can this be installed with a breaker box for off grid use
Answer:	Hello, you need to use our APP to connect with your mobile phone via Bluetooth. The product manual has detailed operation methods.
Question:	What is the factory warranty period and if it's needed will be be shipped to a U.S. address for repairs
Answer:	The items works very nice don't need any support yet......so far so good

Product features

3000W Pure Sine Wave Power Inverter

BELTTT pure sine wave power inverter is a kind of power inverter that converts direct current (battery, solar cell, etc.) to alternating current. This inverter can be used for home, outdoor, car, boat and other environments.

Pure Sine Wave Inverter

Pure Sine Wave are compatible with pretty much all electronics, gadgets, and appliances, and produce a powerful current most like the one supplied by the electric grid. These are the most common choice, because they’re more likely to be compatible with anything you need to plug in.

Remote Control Support

Remote controller with 19ft cable: more convenient to control the inverter ON/OFF while applied to RV, Truck, Boat, Car and Solar System.

Dual LCD Display and 4 US AC Outlets

Easy to see battery input voltage and output power. 4 AC Outlets ideal for charging gameplayer, car vaccum, camera, TV, phone, fridge and etc. And USB port ideal for charging smartphone and other electronic devices.

2 Smart Cooling Fans

Cooling fan helps reduce heat and prevents shortages.

Durable Metal Housing

Durable aluminum alloy housing provides advanced protection from drops and bumps.

Easy to Install with the Mouting Holes

There are 4 mouting holes with the inverter, so you can easy to install it in your RV, car.

• Surge power 6000W - 3000 continuous watts means that you can run your appliance without worry letting you down like lesser inverters.
• Pure Sine Waves (PSW) - allows these electronics to run cooler (less cycling), cleaner, and with less noise. PSW is the output form that comes from the AC Wall outlet in your house and is the most clean.
• Fast Charging - two 3-prong ground fault protected AC outlets (NEMA 5-15), 3 position power switch (On > Off > Remote), 2. 1A USB Power Port, Power & Fault Lights, Solid Mounting Feet
• Ground Fault Protected Outlets - the Negative (Black) Solid Mount Terminal, Positive (Red) Solid Mount Terminal, Twin Cooling Fans, Solid Mounting Feet, and a Grounding Terminal
• RoHS compliant, CE approved, and ETL certified to conform to UL and CSA Standards
• 24 MONTHS WARRANTY

Product features

Safety

We have all of the safety protections in our Pure Line Inverters to protect the user and the Inverter:

Overload, overheat, over voltage, short-circuit, reverse polarity, ground fault, low battery, and terminal covers are necessary features that are built-in to the Pure Line Inverters.

Design

Why is it that power inverters are always large, unsightly bricks?

We took that familiar block shape and whittled it into a sculpted heat-dissipating aluminum alloy body, added twin cooling fans for exceptional cooling efficiency, gave it a rad matte black paint job, and vented the heck out of the front panel.

Applications

In your vehicle, boat, motorcycle, RV, truck, Camper, tail-gating, camping, kid’s soccer games, or anywhere you need to turn DC (battery) power into AC (household) power is where the Pure Line 3000W will shine!

Front Component Details

On the front of the Pure Line 3000W you’ll find: three 3-prong ground fault protected AC outlets (NEMA 5-15), 3 position power switch (On > Off > Remote), High Output Terminal Block, 2.1A USB Power Port, Power & Fault Lights, Solid Mounting Feet, and a remote switch input port.

Rear Component Details

On the rear of the Pure Line 3000W, you’ll find: the Negative (Black) Solid Mount Terminal, Positive (Red) Solid Mount Terminal, Twin Cooling Fans, Solid Mounting Feet, and a Grounding Terminal.

Features

Inspired from the best parts of our popular Elite & SlimLine series of inverters, the Pure Line offers the clean pure sine wave from the Elite Series while retaining the good looks and compact size of the SlimLine Series! This is the pinnacle of inverter technology; the best of the best combined into a single unit!

Specs

• 3000W TrueRated Power
• 6000W Peak Surge
• 3 AC Outlets
• 2.1A USB Power Port
• ETL Certified
• NTG Bonded, True Ground
• Remote Ready (Not Included)
• Conformal Coating

Product description

As a venerable favorite among off-grid users, Wagon Tech's Pro Line series of power inverters have received a considerable makeover. Starting from the ground up, the new 5, 000 watt inverter received a new SMT circuit board, a glossy exterior coating on the smaller casing, and a massive weight reduction. The new SMT (Surface Mount Technology) circuit boards offer greater reliability, better efficiency, and fewer stray RF emissions over the older PCB (Printed Circuit Boards) and through-hole boards. From there the case volume shrunk 28% of the original, and the overall weight was reduced 36%! This makes for one efficient, reliable, beautiful, and lightweight 5, 000 watt inverter in a more compact size. On the front of the Pro Line 5, 000 Watt Inverter you will find the manually operated power switch (On/Off) as well as the jack for the remote power switch (included). 3 conveniently stacked 120V AC outlets capable of providing 1500 watts each are well spaced on the right side of the inverter. Just left of the AC outlets, you will find the LED Over-Load and Over-Temperature warning lights and the Voltage and Amperage level indicators. With the stout AC terminal block just below the Voltage/Amperage Level indicators, you can be certain that your investment is well protected. On the backside of the Pro Line 5, 000 Watt Inverter is the massive cooling fan, the Heavy Duty Solid Mount Positive (Red) Terminal, the Heavy Duty Solid Mount Negative (Black) Terminal, and the Ground-Neutral Bond stud with wing-nut. Both of the Terminals are now Heavy Duty Sold Mounts and come directly out of the case to make connections easier and to avoid the inevitable 90ᵒ bend that the cables make on traditional inverters; causing undue stress and making connections harder. The massive cooling fan is utilized to help keep the inverter cool and operating efficiently. The new Wagon Tech Pro Line Inverters; proving that the best can get better.

• 5, 000 watt, 10, 000 watt surge power
• 28% Smaller & 36% lighter than previous models
• NEW Integrated SMT (Surface Mount Technology) circuit boards offer greater reliability, better efficiency, and fewer stray RF emissions over the older PCB (Printed Circuit Boards) and through-hole boards
• 3 AC outlets, high output AC terminal block, and heavy duty solid mount terminals, and remote power switch is included
• Built-in safety features: over-load, over-heat, low battery, short-circuit and reverse polarity protections

User questions & answers

Question:	Can the low voltage safety shutdown be turned off
Answer:	No
Question:	Where can I get a pdf copy of instructions for this unit
Answer:	Hello Chuck, Thank you for your interest in our Proline 5,000W Inverter (item no. 3744), you can always find the Instructions Manual for any of our devices on our website at Wagan.com simply by searching up your device by name or item no. and then clicking on the SPECS Tab. You will find a link to the Instructions Manual under the SPECS Tab, it will say "Download Instructions Manual" and you will be able to click it to open it up or save it to your files.
Question:	Wat is the out amp
Answer:	Hello, Thank you for your interest in our Wagan Tech Proline 5,000 W Inverter (Item No. 3744), in regards to your inquiry it would depend on which end/side of the Inverter equation you are referring to. The output would be approximately 40~42 Amps at 120 Volts, and the input Amps would be at approx. 400~416 Amps at 12 volts going in. We hope that answers your question, and if you have any other concerns or inquiries please forward them to [email protected]
Question:	How many 12 volt battery and how many solar panel 380 volts each can this invertor run please
Answer:	Hello Julian, Thank you for your interest in our 12v DC to 120V AC Proline 5,000 W Power Inverter, the device does not have any limitations on how many batteries you can use and you can use as many batteries as you'd like, you would just have to make sure that it retains a 12v Overall Battery Bank (connect the batteries in Parallel if they are all 12 volt batteries). And you can also add as many solar Panels as you want, making sure that they are properly installed through a sufficient Solar Charge Controller.

Product features

ProLine 5,000 Watt Inverter

As a venerable favorite among off-grid users, Wagan Tech’s ProLine series of power inverters have received a considerable makeover. Starting from the ground up, the new 5,000 watt inverter received a new SMT circuit board, a glossy exterior coating on the smaller casing, and a massive weight reduction. The new Wagan Tech Pro Line Inverters; proving that the best can get better!

Front Components

On the front you'll find: Power Switch (On/Off), Remote power switch (included) terminal, 120V AC outlets x3, LED Over-Load and Over-Temperature warning lights, Voltage and Amperage level indicators, and the High Output Terminal block.

Rear Components

On the backside of the ProLine 5,000 Watt Inverter is the massive Thermal cooling fan, Heavy Duty Solid Mount Positive (Red) and Negative (Black) Terminals, and the True Neutral-Ground Bond Terminal with wing-nut.

SMT Component Technology

The new SMT (Surface Mount Technology) circuit boards offer greater reliability, better efficiency, and fewer stray RF emissions over the older PCB (Printed Circuit Boards) and through-hole boards.

Reduced: Size & Weight

The aluminum shell casing volume shrunk 28% of the original, and the overall weight was reduced 36%! This makes for one efficient, reliable, beautiful, and lightweight 5,000 watt inverter!

Product description

AIMS Power, backed with over 20 years of experience and exceptional customer service has designed this industrial grade, 4000 Watt Pure Sine Low Frequency Inverter, split phase 120/240VAC output and 12VDC/240VAC input with built-in battery charger and transfer switch. This inverter charger is perfect for medium-sized industrial applications that depend on power being available even under heavy loads. Built with the highest quality transformer, 12000 watt start up for 20 seconds helps start heavy loads. This heavy-duty inverter charger provides reliable power when needed. Use this product for renewable solar, off-grid, business back up power, mobile and emergency backup power applications anywhere that uses 100/110/120/220/230/240 volts of alternating current. This product also has auto frequency detection that allows users to operate at either 50 or 60 hz.

This AIMS power inverter charger includes a powerful 55 amp charger and is capable of accepting any source of 240V AC power to charge batteries, including a gas or diesel generator or shore power at an RV park/truck stop. It will even accept power from an 240V 50amp extension cord plugged into your wall outlet at home.

An optional wired LED or LCD remote can be added for fast and easy operation if your inverter charger is mounted in a location that is inconvenient to reach. This allows the unit to be operated within the cab of a vehicle or from another location in the home or campsite.

• POWERFUL: 4000W continuous, 12000W surge for 20 seconds, 24VDC, 33/16 amps, split phase 120/240VAC pure sine clean power, low frequency, auto transfer switch and 55A smart battery charger for 8 different battery technologies including lithium.
• PROTECTIONS: Overload, over temp, high voltage, low voltage, short circuit, internally fused, low and high voltage alarm, cooling fan, and isolated ground neutral. Listed to UL 458, 1741, 1012 and CSA 22.2 NO. 107.1 & 107.2
• FEATURES: AC direct connect terminal block, charge current control dial, dip switches to set priorities, auto gen start, conformal coated, power save mode and battery temp sensor. Only one set of cables needed. Optional remote available.
• APPLICATIONS: Ideal for large applications going back and forth from shore/generator and inverter power automatically. Homes, boats, RVs, solar, mobile business & work trucks. Offgrid and back-up.
• TRUST AIMS: Buy with confidence. In business for over 20 year. All tech and warranty support in Nevada. 2 YR warranty.

User questions & answers

Question:	Is it possible to run this straight off of solar panels w/ NO batteries, strictly solar, and run a 240 v 6.5 amp motor? No nighttime use
Answer:	The Kiwi 3 with all Apple devices doesn't pair, as a matter of fact you won't see it pair at all. Once the app is opened it will see the device and then once you select it, it will then connect. I hope this answers you question. If not then copy and paste this link.:http://www.plxdevices.com/kiwi3support Here you'll find step by step videos that will walk you through your process for easy set up. I hope I answered your inquiry. Thanks for choosing PLX Devices, and have a great day.Respectfully,Richard EwingCustomer Experience Spec.PLX Devices
Question:	When running off ac input, does this simply pass ac through to the output or does it regenerate the ac sine wave
Answer:	If your vehicle is 1996 or newer, it will work. Yes, it can clear your service light and read your error code. You will need one of the compatible apps.
Question:	Can this be wired as a 220 into a residential panel? How many amps does it output at 220v
Answer:	It does much more than simply scan your car for error codes. The Kiwi 3 scans in realtime and provides data for customized gauges and dashboards. It recognizes a plethora of signals like fuel pressure, turbo boost, mass airflow, O2, intake temperature, etc. and communicates the data to iOS or Android devices via Bluetooth. There are numerous compatible apps on each platform that let you customize the data display to your liking. The Kiwi 3 is the fastest device I've ever used. It connects to my iPhone 6 and Nexus 7 easily and reliably and is the only OBD2 device that provides real-time data fast enough to power multiple gauges simultaneously without lag.
Question:	what is the input AC voltage of the charger
Answer:	It is only suitable for 12V gasoline cars.