12 best the battery chargers

Product description

Replacement charger supplied with x series mirrorless cameras. Charge your np-w126s or NP-W126 batteries.

• Replacement Charger for np-w126s battery
• Charges NP-W126 & np-w126s batteries
• Replacement Charger for NP-W126 battery
• Package Dimensions: 5.2 L x 13.9 H x 10.4 W (centimeters)

User questions & answers

Question:	Will this work for the battery of a fujifilm x100v
Answer:	Yes, it does
Question:	Does this charger support 100-240v worldwide ? Thanks
Answer:	I would think that you would need an adapter that would fit the charger for that.
Question:	So this is compatible with the XT
Answer:	Answer is yes assuming you want to charge the battery.
Question:	Is this compatible with the X
Answer:	No, this charger will not work for your battery. Look at the np-50 charger.

Product description

The ProSportHD Series features a lightweight, tri-surface heatsink design. This delivers significantly faster charging through optimal cooling, while delivering true rated constant current charging amps during charge mode. Fully automatic multi-stage charging enhances battery performance while extending battery life. DC Voltage Systems: 12/24. Amps: 20. Number of Batteries: 2. AC and DC Cable Length: 6'/6'. Size: 7.9" x 12.8" x 2.9". Weight: 7.2 lbs. AC Plug: NEMA 5-15.

• Lightweight, tri-surface heatsink design
• Delivers significantly faster charging though optimal cooling
• Delivers true rated constant current charging amps during charge mode
• Fully-automatic multi-stage charging enhances battery performance while extending battery life
• Battery Type: Flooded, Gel, HP AGM
• Fit Type: Universal Fit

User questions & answers

Question:	on a 2 bank charger can i start my engine while charger is still hooked up
Answer:	You can start your engine with the charger is hooked up .
Question:	If I have two trolling batteries and one starter (3 all together) the 3 bank will charge them all
Answer:	Yes, I have the same setup on my boat and it works great.
Question:	If you need to extend the charging leads what size wire should you use
Answer:	The manual explicitly states not to extend or cut the leads. I’m assuming they have a calibration of the wire resistance internally so that for a specific charging current, they know the battery voltage.
Question:	Can this charge lithium ion
Answer:	Flooded lead acid, Gell cell , glassmat only . No lithium ion

Product features

ProTournament Elite Series

• Fastest Charging Time: 4 to 8 hours

• Charges flooded, AGM and HP AGM batteries

• Available in 24A and 36A

• Available from 2 to 4 battery banks

• Battery Sizes: Group 24 to 31

• Selectable battery types

• Concealed waterproof fan provides forced air cooling for reduced temperatures and fastest charge times

• IP 67 waterproof

• Distributed-On-Demand technology maximizes charging amperages and reduces charging time

ProSport Series HD

• Fast Charging Time: 8 to 10 hours

• Charges flooded, Gel, AGM and HP AGM* batteries

• Available from 6A to 20A

• Available from 1 to 3 battery banks

• Battery Sizes: Group 24 to 31

• Updated button style battery chemistry selection

• New high efficiency design increases performance and provides a 3 yearwarranty.

• IP 67 waterproof

• Distributed-On-Demand technology maximizes charging amperages and reduces charging time

Product description

Replacement Charger For ION and ION X Electric Ice Auger

• SMART CHARGER: Smart charger automatically turns off once the battery is fully charged.
• RE-CHARGE IN A FEW HOURS: Provides a complete battery charge in 3-5 hours.
• INDICATOR LIGHTS: Indicator lights on the charger show the current charge status: Charging, Charged, Too Hot, Too Cold, and Power

Product description

The M18 Dual Bay Simultaneous Rapid Charger is capable of charging two batteries at once, over 3X faster than standard sequential chargers. The charger accepts all MILWAUKEE M18 batteries. This compact battery charger is equipped with REDLINK Intelligence that communicates directly with M18 batteries to monitor cell voltage, temperature and charge status to deliver the best combination of charge duration and pack lifespan. Charging batteries simultaneously at a rapid charge rate massively reduces downtime and maximizes productivity. Its compact size makes this an ideal charger to carry on and off the job, hang in a work trailer, or charge on the top shelf of a job box. The M18 Dual Bay Simultaneous Rapid Charger is perfect for professionals who charge and swap battery packs throughout the day. REDLINK Intelligence: Optimizes charge rates based on the battery type and temperature to minimize charge duration and maximize battery lifespan 5 Year charger warranty Includes: M18 Dual Bay Simultaneous Rapid Lithium-Ion Charger - 48-59-1802.

• Internal fan maximizes charger performance
• 80% Charge Indicator: the charger slowly flashes green when the battery reaches 80% state of charge
• Integrated hang holes for wall mounting
• M18 Ports
• Power Source: AC

User questions & answers

Question:	What happens once the battery is fully charged
Answer:	It seems like it will maintain the charge, if I remember correctly. The fans shut off after the battery has been completely charged.
Question:	how long does it take to fully charge an 8.0 battery
Answer:	About an hour
Question:	How fast does it charger
Answer:	It is quick. Have not timed it but I have an older 1 battery charger and it takes forever. This charger, you put the batteries in and I would say, 30 minutes maybe and they're done. Maybe less, maybe more but it is much faster than the single charger I have.
Question:	Max wattage draw of this charger
Answer:	Max input amps are 5.5. 660 max watts

Product description

Green Works GMAX 40 Volt Lithium Ion Battery Charger, For GMAX 40-Volt Batteries Only, Will not charge previous Green works 40-Volt batteries, Model No.29482.

• High Performance G-MAX 40V Lithium-Ion Battery Charger for low cost operation
• Energy Star Rated for eco-friendly households
• Quick battery charge time, 60 minutes for 2 AH Battery and 120 minutes for 4 AH Battery
• Compact design for easy storage and easy mounting
• Compatible Only with G-MAX 40V Battery Models 29462 and 29472

User questions & answers

Question:	What is the charger for lb40a010 gmax 40v 5.0ah battery
Answer:	Hello Teena, This charger can be used for the G-Max 40v 5ah battery.
Question:	Are these compatible with other 40v max batteries like sears, b&d, dewalt, etc
Answer:	Hello Paul,This is compatible with only the G-Max 40v line. If you require further clarification on this please contact us at [email protected] or call our customer support line at 1-888-909-6757.
Question:	Will this work as a 29292 charger
Answer:	Hello there, Charger model 29292 is a Gen 1 40v charger and is not the replaceable with charger 29482 which is designed for G-Max 40v unit. If you require assistance locating a replacement for charger 29292, please contact us at 1-888-909-6757.
Question:	Hello it works 220 volts
Answer:	Hello jesus,The charger is rated for 120v AC input.

Product features

About Us

The company distributes Greenworks-branded and private label products, as well as products for an extensive network of Original Equipment Manufacturers. With a robust line of Greenworks-branded products including 24-volt, 40-volt, 60-volt, 80-volt, and commercial-grade 82-volt battery-powered outdoor power equipment, a full line of corded equipment, and reel mowers, Greenworks offers the right tool for every job. Greenworks tools deliver the power and performance of comparable gas-powered tools without the mess, noxious fumes, stamina-reducing vibration and noise associated with gas products.

Product description

Simple. Fast. Just plug in a pair of Traxxas iD batteries and press Start. Traxxas’ exclusive iD technology eliminates complicated charger programming by automatically configuring and optimizing the charge settings for Traxxas iD batteries. The EZ-Peak Dual charges two batteries simultaneously at up to 50 watts (4 amps) each, or switch to High-Output mode to charge a single battery at the maximum 100 watt (8 amp) output. Faster charging means you get to spend more time behind the wheel. The EZ-Peak Dual puts out a full 100 watts of power that equates to 8-amps of charging horsepower. It’s a twin turbo-equipped charger. Traxxas iD LiPOs (4000mAh or higher) charge nearly 2x faster in High Output Mode. The EZ-Peak Dual isn’t just for iD LiPOs; the Multi-Chemistry nature of the charger means LiPOs and NiMHs can be charged at the same time. Advanced Mode opens the door for backwards compatibility. This allows EZ-Peak Dual to charge any Traxxas Power Cell battery equipped with a first-generation Traxxas High-Current Connectors and Traxxas iD batteries independently or simultaneously. There are two balance ports built into the charger for Traxxas LiPO batteries equipped with external balance leads. Take full advantage of the 8-amp output and experience the pinnacle of charger flexibility and power. With iD Auto-Battery Identification there’s no need to worry about the battery chemistry or capacity. EZ-Peak Dual identifies the type of battery and its capacity. EZ-Peak Dual also cuts down on wasted time by eliminating the hassle of programming and using complicated setups. Just plug an iD battery in and press Start. That’s it! Keeping with the simplicity and ease of use, the iD system eliminates fragile balance wires and clunky balance leads. The iD system streamlines the entire charging experience.

• Charger recognizes Traxxas iD batteries to automatically program and optimize charger settings
• 100-Watt output for charging 5-8-cell NiMH batteries and 2S and 3S LiPO batteries
• Advanced Mode for full manual control of charger settings and integrated balance ports for conventional LiPO batteries
• Easy to use interface with charge progress indicator, audible alerts, and integrated cooling fan
• Charges a NiMH and LiPO at the same time with one button LiPO storage charge to protect your battery investment

User questions & answers

Question:	Will this automatically determine the charge rate required for a different brand lipo batteries
Answer:	No, you will have to select the proper Amperage, which is easy. Simply set it as close to the mAh rating of the battery as possible. If you have a 2000mAh LiPo, set the charge amperage to 2Amps. If you have a 4000mAh LiPo, set it to 4Amps, etc...
Question:	Does it work for the Rustler batteries
Answer:	In short, yes. It will work with any 2S or 3S LiPo (7.4V or 11.1V). It will work with any 5cell to 8cell NiMH as well. Your batteries do not 'need' to have the Traxxas ID plug. You can use the standard Traxxas Plug as well. And if you don't have either of those, then you can use an adapter to go from the Traxxas Plug to a plug of your choice. Here is a link to some adapters that you can use. (Keep in mind that there is a 2S and 3S JST-XH plug balance port behind the front flap/cover, which will allow you to connect your standard LiPo batteries)http://www.amazon.com/dp/B01605T9OQhttp://www.amazon.com/dp/B016065X72http://www.amazon.com/dp/B01606EC6Ahttp://www.amazon.com/dp/B01606KNKYhttp://www.amazon.com/dp/B016072F18http://www.amazon.com/dp/B016075GEGhttp://www.amazon.com/dp/B016078OF4http://www.amazon.com/dp/B01607BQTAhttp://www.amazon.com/dp/B01607M9C8
Question:	How long would it take to charge a 25c 7.4v 2 cell 10,000 mah lipo battery
Answer:	This charger can be switched to High Output Mode where 1 port will use all 8Amps/100Watts of power. So you can charge your 10,000mAh (or 10Ah) battery at 8Amps. 10Ah / 8A = 1.25Hours
Question:	Will this charger work for Traxxas 7.2v 2200 mah Lipo batteries? Is there any mah that is too low
Answer:	Not sure, but be careful with this seller. One side did not work and I sent back 3 days later in original box and they kept $20 from the refund!!

Product features

Charging Solved

Charging Traxxas batteries is now safer, faster, and easier than ever before. Just plug in a pair of Traxxas iD batteries and press Start. Traxxas’ exclusive iD technology eliminates complicated charger programming by automatically configuring and optimizing the charge settings for Traxxas iD batteries. You don't need to be a battery expert to charge with the EZ-Peak Dual. Costly charging mistakes are a thing of the past.

The EZ-Peak Dual fast charges two batteries simultaneously at up to 50 watts (4-amps) each, or switch to High-Output mode to charge a single battery with up to the maximum 100 watt (8-amps) output. You can even charge a NiMH and a LiPo at the same time.

LED progress bar and audible alerts keep you informed while the advanced high resolution peak detection delivers a perfect charge every time. The EZ-Peak Dual’s Storage Mode protects your LiPo battery investment by safely preparing the batteries for extended storage.

Simple and Safe One-Button Charging

When paired with Traxxas iD batteries, the EZ-Peak Dual automatically configures the charge settings for your batteries. There is no guesswork involved. Just press the Start button and Traxxas iD technology does the rest.

Fast Charges Two Batteries Simultaneously

Don't spend all day waiting for your batteries to charge. EZ-Peak Dual charges two batteries simultaneously! EZ-Peak Dual will even charge one NiMH and one LiPo battery at the same time.

Charge a Single Battery Twice as Fast

EZ-Peak Dual fast charges two batteries at up to 50 watts (4 amps) simultaneously. Switch the charger into High-Output mode and charge a single battery at twice the speed with up to 100 watts (8 amps). EZ-Peak Dual makes quick work out of your massive Traxxas 8400 3s LiPo batteries.

Legacy Support for Traxxas High Current Connectors

Don't worry, EZ-Peak Dual will still charge your older Traxxas batteries. The integrated balance ports allow you to charge LiPo batteries with Traxxas High Current Connectors and separate balance connectors. Legacy NiMH batteries are no problem for EZ-Peak Dual's backwards-compatible high current ports. EZ-Peak Dual is the only charger you will ever need!

Advanced Mode for Full Manual Control of Charge Settings

Advanced Mode allows you to take full control of your legacy battery's charge settings. Select the battery type, charge mode, and charge rate to suit your battery. Bright LED indicators display your charge settings.

Storage Mode for Safe Battery Storage

LiPo batteries' unique chemistry requires them to be stored with a 'storage charge' when unused for more than 7 days. EZ-Peak Dual removes the guesswork and protects your battery investment. Select Storage Mode and the charger will charge or discharge your battery automatically with the press of a button!

Important LiPo Battery Information

Read and follow all manufacturer's charging and handling instructions, warnings, and precautions before use. Use only a Traxxas iD equipped LiPo charger with this battery. Do not charge with a NiMH only charger. Never leave batteries unattended during charging.

• 𝗟𝗢𝗡𝗚𝗘𝗥 𝗕𝗔𝗧𝗧𝗘𝗥𝗬 𝗟𝗜𝗙𝗘 - Provides 24/7 protection by preventing discharge from connected circuitry and guarantees more battery power
• 𝗦𝗔𝗩𝗘𝗦, 𝗖𝗛𝗔𝗥𝗚𝗘𝗦, 𝗔𝗡𝗗 𝗠𝗔𝗜𝗡𝗧𝗔𝗜𝗡𝗦 𝗬𝗢𝗨𝗥 𝗘𝗫𝗣𝗘𝗡𝗦𝗜𝗩𝗘 𝗟𝗜𝗧𝗛𝗜𝗨𝗠 𝗕𝗔𝗧𝗧𝗘𝗥𝗬 - Ultimate protection for your high performance Lithium (LiFePO4 / LiFe / LFP) battery.
• 𝗚𝗘𝗧 𝗬𝗢𝗨𝗥 𝗕𝗔𝗧𝗧𝗘𝗥𝗬 𝗧𝗢 𝗪𝗢𝗥𝗞 - Saves batteries when no other charger will work. If OptiMATE can't save it, nothing will.
• 𝗦𝗔𝗩𝗘𝗦 𝗔𝗡𝗗 𝗧𝗘𝗦𝗧𝗦 𝗬𝗢𝗨𝗥 𝗙𝗟𝗔𝗧 𝗕𝗔𝗧𝗧𝗘𝗥𝗬 - The best preventative measure against Lithium battery damage
• 𝗪𝗢𝗥𝗞𝗦 𝗙𝗢𝗥 𝗬𝗢𝗨𝗥 𝗩𝗘𝗛𝗜𝗖𝗟𝗘 - Whether it be off-road, motocross, or track motorcycle
• 𝗜𝗡𝗧𝗘𝗟𝗟𝗜𝗚𝗘𝗡𝗧 𝗪𝗔𝗞𝗘 𝗨𝗣 𝗠𝗢𝗗𝗘 - BMS (Battery Management System) wake up mode safely wakes battery with integrated BMS protection out of sleep mode.
• 𝗛𝗜𝗚𝗛𝗟𝗬 𝗥𝗘𝗣𝗨𝗧𝗔𝗕𝗟𝗘 𝗖𝗛𝗔𝗥𝗚𝗘𝗥 - OptiMATE Lithium is recommended by Honda, Yamaha, Kawasaki, KTM and Husqvarna and global Lithium battery manufacturers Antigravity, Super-B and Earth-X.

User questions & answers

Question:	I have a lithium 12v battery not 12.8v. Is it still compatible
Answer:	Yes I use it on my 12v motorcycle lithium battery
Question:	Well this charger work with AGM batteries
Answer:	No, it works on Lithium (Li-Ion, LiFePO4) batteries.
Question:	Can I overcharge my battery if I leave this on? Or does it have a safety mechanism to prevent being overcharged
Answer:	No it will not overcharge. Charger goes into a maintenance mode after battery is fully charged and can stay on the charger. Keeps battery at optimum charge until you disconnect it.
Question:	Can I get it with eu plug
Answer:	We don't offer the EU plug, but it can be used with an EU plug (100-240V).

Product description

The Traxxas 2984 charger/battery completer pack contains a powerful #2926x 8.4V 3000Mah NiMH hump pack battery and a #2969 2-amp AC wall charger. The AC 2-amp NiMH fast charger uses a wall outlet to charge your 5-7 Cell (6 - 8.4V) NiMH batteries quickly and efficiently. The powerful 2-amp output makes quick work of charging and a status LED informs you when your charging is complete. The 2969 charger is for NiMH batteries only and should never be used to charge lipo batteries. Use Traxxas stock and hop-up replacement parts to get the most out of your Traxxas RTR vehicles. This product is made from high quality materials and designed for long-lasting performance. This is replacement hardware for use on Traxxas vehicles; consult your user's manual for exact parts listings.

• Charger/battery completer pack contains a powerful #2926x 8.4V 3000Mah NiMH hump pack battery and a #2969 2-amp AC wall charger
• Powerful 8.4-Volt battery provides powerful acceleration and high speeds while the large 3000Mah Capacity provides long run times
• Powerful 2-amp charger output is up to 10x faster than trickle Chargers and makes quick work of charging
• Charger features LED status light and charges 6-volt up to 8.4-Volt NiMH batteries only (not compatible with LiPo batteries)
• LiPo batteries max out the potential of 1/10 scale vehicles like Slash, E-Revo, Summit, Spartan, and M41 with powerful acceleration and long run times

User questions & answers

Question:	Does it work with slash 4x
Answer:	Yes it will.
Question:	This battery suitable for Traxxas e revo vxl
Answer:	no, it is is too big for 1/16
Question:	How long does the battery last
Answer:	Depends on what vehicle you are using it in and how you are driving, 10 - 15 minutes is probably average.
Question:	Are you supposed to remove plastic wrap around the battery
Answer:	No do not remove the plastic wrapped around the batteries.

Product description

Valken Energy. Valken brings you yet another product with market leading quality and value. Valken, who else.

• Automatic stop full charge by Delta Peak detection
• Input voltage: 100-240VAC
• Output voltage: 8.4V-9.6VDC
• Charge current: 600mA
• Tickle current: 200mA (automatic stop after 5 hours)
• Short circuit & reverse polarity protection

User questions & answers

Question:	Will this stop charging when the battery is full
Answer:	No
Question:	I bought this charger and it blinks orange and red once plugged into my battery. Does anyone know what that means? The battery works just fine
Answer:	it has never happened to me maybe theres something wrong with your battery? try a battery that works just fine
Question:	Will this work for AA 500m Ah 9.6v
Answer:	I don't believe it will
Question:	Will thiis charger work for the imaginext spike ultra dinasaur by fisher price 9.6v, aa size 1300mah
Answer:	No the connectors are not the same size

Product description

Panasonic K-KJ17MCA4BA Advanced Individual Cell Battery Charger Pack with 4 AA eneloop 2100 Cycle Rechargeable Batteries

• Recharge up to 2100 times
• Maintain up to 70% of their charge after 10 years (when not it use)
• 2000mAh type, 1900mAh min, Ni-MH pre-charged rechargeable battery
• 4 position charger with advanced, individual battery charging, AA and AAA cells
• Battery detection technology - automatically shuts off when charging is complete

User questions & answers

Question:	can you charge other brand batteries in this charger
Answer:	I have this charger and it will not charge any brand battery except the Eneloop battery. Do not Buy it for other batteries, it will not work. I bought it based on reviews and that I have about 20 NiMH batteries of various brands. Not one of the 20 would charge on this charger.
Question:	Must you charge 4 batteries at a time OR can you charge, say 2 with 2 open slots
Answer:	The Panasonic BQ-CC17 can recharge 1, 2, 3 or 4 AA/AAA cells at once. You don't need to charge in pairs like in the case of old MQN06 charger.
Question:	i just received the charger and i do not see any indicator lights on mine. anybody
Answer:	Just to update this - the chargers shipping now have hidden lights (unlike the product picture). To see them charger must be plugged in with batteries in place. NOTE: To clarify the paper comment - the batteries are shipped in the charger in the charging position. Before first use, remove all four batteries and you will find a small piece of cardboard paper at the top covering the positive charging contacts. This paper is to be discarded. Put the batteries back in position, plug in charger to working circuit and you will then see the now hidden lights under the white plastic "skin" below each battery. This is still true as of 11/2018.
Question:	What is the difference between the Panasonic K-KJ17KHCA4A Eneloop Pro vs the Panasonic K-KJ17MCA4BA? Which is a better choice to buy
Answer:	The pro cells hold about 25% more capacity under use before you have to charge it. That translates to longer run times for things like hiking GPS and high powered flashlights and wireless microphones in constant use. The trade off is that the pro cells don't retain a charge when stored which is good if you normally plan to drain the battery within a few days of charging it. In a TV or DVD remote control, the pro cells would have to be charged at least once every several months, where the regular cells will last for years without charging in remote controls that are not used daily. So far, I have never had an Eneloop battery ever leak, where I have had several expensive remote controls and headlamp LED's destroyed by leaking modern alkaline batteries. Modern alkaline batteries will often start leaking while still performing and still many years before the best used date has arrived. Modern warrantees for alkaline batteries only cover the battery that fails to perform, not the expensive device that was destroyed by the leaking alkaline battery. I have had several Duracell batteries start leaking while still unused in the original package stored in a cool dry place (basement) and still have a few years before the best used date has arrived. Today's alkaline batteries are junk. The standard Eneloop battery seems to be the most dependable battery I have ever found. They cost more, but the extra cost is worth it. Other brands of NiMH batteries I use often don't hold a charge in storage. The supposed lower voltage compared to alkaline is not the whole truth. Under extreme low power loads, alkaline battery voltage is higher, but under higher loads like cameras and flashlights, the alkaline battery voltage drops lower than NiMH battery within a second of the time the load is applied and then goes back up to resting voltage after the load is turned off. After an alkaline battery looses around 20% of its original charge, it is performing worse than a rechargeable NiMH battery and many devices like cameras can't take that drop in voltage.

Product features

eneloop

eneloop Ni-MH 'Low Self Discharge' batteries utilize Panasonic’s advanced rechargeable cell technology allowing them to be recharged up to 2100 times.** These battery cells are ideal for all household products including flashlights, wireless gaming devices, digital camera flash units, and wireless mouse and keyboards.

Product description

• Individually charges Eneloop and Eneloop Pro Ni-MH rechargeable AA or AAA batteries
• 4 individual LED charge indicator lights
• Retractable AC plug. Fast efficient charging
• Accepts input voltages ranging from 100 to 240VAC, 50/60Hz
• Includes 4 AA new Eneloop Pro 2550mAh Type, 2450mAh min, Ni-MH high capacity rechargeable battery

User questions & answers

Question:	Can the charger be used to charge other brands of Ni-MH batteries. A little tired of each brand claiming only their charger will do it properly
Answer:	Yes, a Ni-MH battery is a Ni-MH battery. They say that their charger can only charge their batteries because of legal liability reasons, and so you'll but more of their batteries after you buy the charger ;) Most chargers can detect when it's fully charged because the voltage drops a little when it is, as in 5 mv to 10 mv. The percentage of how much power a battery has is from the voltage. e.g. the peak voltage of most high capacity Ni-MH batteries is between 1.45 to 1.55 volts. I know it says it's nominally 1.2 volts but I think that's when it reaches 0% just like a lead acid batteries in vehicles, they're fully charged at 13.2 volts even though they're called 12 volt batteries. I don't understand the world! I mean a smaller number for gauge means it's thicker?! That doesn't make any sense at all! D: I like turtles.
Question:	Are there any differences between this charger and the NC-MQN06U not in terms of form factor but in terms of functionality and charging
Answer:	The new BQ-CC17 charges each cell independently. The old MQN06 charges in pairs only. Other than that, they have exactly the same charging current (hence charging time).
Question:	Should you remove the batteries from the charger once they're charged or can you leave them on
Answer:	Ditto the 11/30/2014 comment, no need to leave them on once they are charged; I usually remove them once I see they're charged.
Question:	If I use these for photography flashes -- why would I use the pro version instead of the regular ones? I'm confused as to how they are better
Answer:	The Eneloop Pro have a higher capacity than the standard ones (roughly 2,450 vs. 1900, about 29% greater); all other things being equal you will get more flashes per battery change. Note that different generations have different performance ratings. In some cases the Pro are rated for fewer charge cycles, however; the Lite versions when available have even less capacity per charge, but more charge cycles.

Product description

Finally! A FULLY AUTOMATIC charger that works on ANY 12 Volt Lithium, Lead Acid, AGM or GEL battery in ANY situation! This charger works with AGM, flooded, GEL, or lithium (LiFePO4) batteries. ISM micro-controller constantly updates charge sequence for smooth transitions between charging steps. The most cost-effective solution for long-term maintenance of 12V batteries in any vehicle stored in or outdoors. Fully Automatic “Plug and Play” - Simply connect to the battery and plug it into the nearest power socket, the rest is fully automatic. 4-Step Charging - Qualification, Bulk, Absorption and Float. Recommended for Lifepo4 lithium battery brands. Includes all safety features such as reverse polarity protection, no spark connection and short circuit protection. Comes with Alligator Clips and Fused Ring Terminals. 5 year limited warranty. Dimensions: “Body” of Charger Length = 3-3/4" Width = 2-3/8" Depth = 1-3/4" Included: Fully automatic battery charger. Direct connect fused harness / ringlet connector with weatherproof cap. Set of positive and negative battery clips.

• Finally! A FULLY AUTOMATIC charger that works on ANY 12 Volt Lithium, Lead Acid, AGM or GEL battery in ANY situation!
• ISM micro-controller constantly updates charge sequence for smooth transitions between charging steps. The most cost-effective solution for long-term maintenance of 12V batteries in any vehicle stored in or outdoors.
• Fully Automatic “Plug and Play” - Simply connect to the battery and plug it into the nearest power socket, the rest is fully automatic. 4-Step Charging - Qualification, Bulk, Absorbtion and Float.
• Includes all safety features such as reverse polarity protection, no spark connection and short circuit protection.
• Comes with Alligator Clips and Fused Ring Terminals. 5 year limited warranty.

User questions & answers

Question:	Is this a Deltran or a counterfeit chinese fake
Answer:	It is a 100% Deltran Tender. We sell quite a few of these, this is a great product. thanks Billet Proof Designs
Question:	Is this model (Battery Tender Junior 800) waterproof
Answer:	I don't believe so
Question:	can this plug into a a standard 120v wall outlet
Answer:	This is designed to plug into a standard wall outlet found in the US. Let us know if you have any further questions. Thank you,
Question:	Will this work on lithium if it doesn't have a bms? will it recover dead batteries
Answer:	It will work with a lithium battery that does not have BMS. The tender itself is designed to keep the charge at a safe level for a 12 volt lithium battery, so you can leave it plugged in. If you need to recover a "dead" lithium battery, I would go with a more advanced charger found that is built to not only maintain, but recover batteries, like an Optimate. Please contact us directly for more information. That doesn't guarantee that it will recover any low lithium battery as the cells could have been damaged in the process.