9 best warn hoists

Product description

You think up the task and the WARN PullzAll can help you get more done in less time with less effort. Great for construction, pipe fitting, iron work, equipment/plant maintenance, auto shops, garages, and machine shops. Also ideal for farm and ranch use, home improvement, hunting, camping and more. Designed to move heavy machinery, hoist an engine block, or lift a load precisely into place, then nail it, weld it, and get the job done. The PullzAll has a variable-speed control trigger with a forward and reverse control button allowing for exact movements. At 15 lbs., PullzAll is easy to use and portable. Wire rope measures 15' of 7/32" and includes a swiveling anchor hook for a secure hold. An LED load indicator provides user feedback during lifting/pulling, and an electronic load limiter prevents overloading. Also available in a cordless model: WARN 885005.

• Manufactured in China
• Easy to use
• Highly durable
• Always remove any element or obstacle that may interfere with safe operation of the pulling tool
• No load line speed: 13.8 fpm
• Lifts or pulls up to 1,000 pounds
• Replaces old fashioned come-a-longs and chain falls

User questions & answers

Question:	can it spool a standard 50 feet cable if I install it, 15 ' is not enough for me
Answer:	I've never seen it damage a surface, although I suppose it could, since it contains distillates (like toluene?) that might dissolve some materials. More importantly, this stuff is VERY sticky, so on a rough surface you would never be able to completely remove it. For that matter once it gets a good grip, it's about impossible to pull apart anyway. For example, I glued just the red plastic cover from a small reflector (with no backing) to the rear of the seat post on my bike -- just for fun, and extra safety. I put one blob on each side where the reflector touched the post, and masking taped the reflector in place till the glue dried. Years later when I replaced the seat and had to pull off the reflector, first it hadn't fallen off in the meantime, and second it was nearly impossible to get loose, then I had to work at remaining blobs of glue, stuck to chromed steel, with needle nose pliers, to yank them off the metal.
Question:	Watched your video, looks great. Why don't you show the 110v power supply running across the pasture where you are installing the fence
Answer:	Yes, I had good luck doing that with this. It's good at bonding surfaces that are different. I'd use rubbing alcohol on the surfaces first to clean them.
Question:	What Amperage (amps) is this rated at
Answer:	Yes it's great stuff
Question:	How accurate can a person be with stopping a load at the correct height and/or lowering of a load
Answer:	Q-Bond is a two-part system utilizes liquid glue combined with powders to create reinforcing and filling capabilities that allows breaks, cracks, holes and gaps in plastics and metals to be repaired to regain original shape on a wide range of items. Use to fix fuse boxes, distributor caps, lugs and clips, waterpumps and casing, electronic devices and components, speedometers, kitchenware, toys and more. Can be ground down, filed, sanded, tapped and painted. Hardens once adhesive touches powder. Contains two 10ml adhesives, one 20g black filling powder and one 20g grey filling powder. Resistant up to 356 degrees, 1300 psi, 100% chemical resistant, works on all materials except polyethylene and polypropylene plastics, stainless steel, and silicone rubbers.

Product features

Warn Corded and Cordless PullzAll electric pulling tools

The Warn Red PullzAll is the latest addition to the Warn portable utility winch lineup. The Red PullzAll is a powerful lifting and pulling tool and is available in both corded and cordless models. Powered by a 120 volt AC power source, this compact tool has a pulling capacity of 1000 pounds (454 kilogram). The unit has an electronic load limiter with LED indicator, and a variable speed trigger for power in and power-out operation. The unit is also equipped with a versatile swivel anchor hook, 15 feet (4.6 meter) of durable wire rope, and an industrial-grade front hook. When work takes you to more remote locations, bring the mechanical muscle of the portable, cordless PullzAll with you. From tough tasks like pulling pipe to stretching wire fence, you'll come to count on PullzAll to get the job done quickly and effortlessly.

The PullzAll will help get the job done easier, faster, and with less manual labor than a come-a-long or chain fall, making workers more productive. The Red PullzAll is great for pulling big game out of the field, hoisting gear up into a deer stand, and pulling an ATV up into a truck bed. It’s also great for the tradesperson, farmer/rancher, or anyone that needs to lift or pull up to 1,000 pounds It can be used for construction, pipe fitting, iron work, equipment and plant maintenance, farm and ranch use, auto shops, garages, machine shops, home improvement, and more. Applications could include lifting an I-beam and holding it in place for welding, pulling heavy machinery at the plant, pulling fence in the field, or lifting an engine out of a vehicle. Plus, the PullzAll is lightweight so you can take it to your cabin, your hunting locations, or jobsites.

This PullzAll model features a 110V AC power cord, perfect for use in shops or anywhere power is available.

The Red PullzAll, like all PullzAll tools, have features such as the ability to change from forward to reverse motion at the push of a button to allow for easy positioning, and a brake that’ll securely hold your item in place where you want it. You’ll work with confidence because the PullzAll also has an electronic load limiter with LED indicator that provides feedback during the lifting or pulling process.

Operating the PullzAll is simple. First, secure the tool using the swiveling anchor hook. Next, power out up to 15 feet of strong 7/32 inches wire rope and rig it to the item you want to move using the industrial- grade rigging hook. Press the directional switch into to the desired position, and squeeze the trigger to begin movement and to control line speed.

Available accessories

The PullzAll winch sling is constructed of high grade nylon and can lift loads up to 1,000 pounds and is the perfect compliment to your Warn PullzAll. The winch sling makes lifting large and bulky items a breeze.

Available accessories

The Warn PullzAll Rigging Kit includes two 1 inch x 48 feet rigging straps, rated to 5,000 pounds and two D shackles, 1,000 pounds capacity, all in a durable carry bag. The bag holds not only the rigging kit contents but also the PullzAll and its accessories as well. The right tools and space you need to have everything in one convenient portable location.

Available accessories

Replacement steel rope for the Warn PullzAll. Constructed of steel wire rope, galvanized to help resist corrosion and has a swag loop at one end. This is a replacement rope for the Warn PullzAll. Measures 15 feet by 7/32 inches and includes new hawse fairlead.

Available accessories

The Warn PullzAll Car Charger is designed for use with the cordless PullzAll electric pulling tool. Plugs into the accessory or cigarette lighter of the automobile and will charge the 24 volt NiMH battery. Never run out of power again when you're out in the field.

Product description

Wherever there is a wall socket, you can now pull or drag just about anything anywhere with the versatile WARN 1000AC Utility Winch. The 1000AC winch delivers 1,000 lbs. of pulling capacity, 43' x 3/16" wire rope, a long duty cycle and legendary WARN durability make this a tool you can rely on to get the job done.

• Strong 1000 pounds (454 kilogram) pulling capacity
• Smooth and durable planetary gear train. Mounting Pattern Length- 3.1 Inch. Mounting Pattern Width- 2-1/2 Inch
• Powerful permanent magnet motor with serviceable brushes for long life
• Sealed, pendant-style remote with 8 feet (2.4 meter) lead
• Long 43 feet (13.1 meter) of 3/16 inch (4.8 millimeter) wire rope

User questions & answers

Question:	Does the control cord unplug from the housing
Answer:	No. Both the control and power cords are permanently attached.
Question:	would this winch be tolerable "noise wise" if used indoors
Answer:	Really the noise depends on how much it is pulling. I used it to pull a boat into the garage and it wasn't too loud but I was not inside.
Question:	does the motor have a recovery time after a period of use
Answer:	supposed to wait 2 times as long after use before using again. so for 20 seconds you wait 40 seconds before using again. it works well. we use it to load and unload an 800 pound cabinet into our toyhauler.
Question:	is it able to freewheel to take the cable outor is it power in/out. thanks
Answer:	Power in and out ... but I discovered that there is a handle at the cable-end of the winch that allows you to disengage the spool from the drive motor. I've never used this feature, but there are instructions printed on the unit showing how to use it.

Product description

The DC1200 hoist combines a powerful permanent magnet DC motor with robust sealing and our proven 3-stage all metal geartrain. Permanent grease lubrication means years of trouble free service. All WARN hoists incorporate an automatic mechanical brake that holds full rated load. The durable powder coated finish stands up to the elements and looks great. The DC1200 hoist is built on a compact midsize framed with integrated tie bars that's easy to install. Controls and accessories available separately. This is hoist is 24 volt configuration.

• Powerful permanent magnet DC motor with robust sealing and our proven 3-stage all metal geartrain
• Hoist is built on a compact midsize framed with integrated tie bars that's easy to install
• Permanent grease lubrication means years of trouble free service
• Lift loads up to 1,200 lbs. with an automatic mechanical brake that holds a full rated load
• Controls and accessories available separately

Product description

The WARN 37469 Brake Assembly holds loads strong on inclines. It provides a tight stopping point and the hydraulic style eases operation and adds safety. This exceptional replacement part keeps hoist operating properly.

• Holds loads strong on inclines
• Provides a tight stopping point
• Hydraulic style eases operation and adds safety
• Replacement part keeps hoist operating properly

Product description

The WARN 37470 Brake Assembly holds loads strong on inclines. It provides a tight stopping point and the hydraulic style eases operation and adds safety. This exceptional replacement part keeps hoist operating properly.

• Holds loads strong on inclines
• Provides a tight stopping point
• Hydraulic style eases operation and adds safety
• Replacement part keeps hoist operating properly

Product description

The WARN 37468 Brake Assembly holds loads strong on inclines. It provides a tight stopping point and the hydraulic style eases operation and adds safety. This exceptional replacement part keeps hoist operating properly.

• Provides a tight stopping point
• Electric style eases operation and adds safety
• Replacement part keeps hoist operating properly

Product description

The DC800 hoist combines a powerful permanent magnet DC motor with robust sealing and our proven 3-stage all metal geartrain. Permanent grease lubrication means years of trouble free service. All WARN hoists incorporate an automatic mechanical brake that holds full rated load. The durable powder coated finish stands up to the elements and looks great. The DC800 hoist is compact and comes standard with a steel mounting plate and hardware to make installation quick and easy. Controls and accessories available separately.

• The Package Length of the Product is 15.748 centimeters
• The Package Width of the Product is 32.512 centimeters
• The Package Height of the Product is 39.624 centimeters
• Country of Origin: UNITED STATES

User questions & answers

Question:	Is the mounting plate attached to the hoist
Answer:	Yes. That is its intended application. Things to keep in mind though are that it is only rated to lift and hold an 800lb load when there is just one layer of wire rope on the drum. I think it drops to about half that with the drum full of cable. Also, it's intermittent duty- I don't recall the specs, But something like 1 minute use then 10 minutes to cool. And of course, because it has no redundancy, you don't want anyone underneath a load.
Question:	what is rated lifting weight
Answer:	I would say its more like 26 lbs. I didn't weigh it exactly, and currently don't have the item at the moment, but its fairly heavy. check specs on WARN website.
Question:	can this be used for lifting operations
Answer:	No, the description lists them as 3 inch
Question:	It says the item weighs 26 lbs, yet the shipping weight is only 16lbs...what gives
Answer:	This pad is designed for wet polishing, for dry polishing search for "Stadea Series Super C Dry Floor Pad".

Product description

WARN IND. 40709 S/P CNT PCK 12V HOIST W/P

• PVP

Product description

The WARN 39601 24-Volt Industrial Hoist Permanent Magnet Motor is specifically engineered for DC1600, 2000, and 2500 winches. This motor control pack delivers a heavy-duty motor with low-amp draw. 24-volts provide a powerful and efficient current crucial for an industrial hoist. All around extremely efficient permanent magnet motor.

• Specifically engineered for DC1600, 2000, and 2500 winches
• This motor control pack delivers a heavy-duty motor with low-amp draw
• 24-volts provide a powerful and efficient current crucial for an industrial hoist
• All around extremely efficient permanent magnet motor