11 best sunex car jacks

Product description

2.75" min height is ultra-low and ideal for sports cars, exotic cars, and flat tires. 24" max height is versatile and lifts high enough for pick-ups and SUV's. Rapid rise technology with dual pump pistons reaches max height quickly in 6.5 pumps. 18" throw is long and reaches all lift points under vehicle. Low profile design is consistent throughout the whole chassis, allowing full reach beyond pinch welds . backed by 1 year SUNEXpress Warranty.

• 2.75" min height is ultra-low and ideal for sports cars, exotic cars, and flat tires
• 24" max height is versatile and lifts high enough for pick-ups and suv's
• Rapid rise technology with dual pump pistons reaches max height quickly in 6.5 pumps
• 18" throw is long and reaches all lift points under vehicle
• Low profile design is consistent throughout the whole chassis, allowing full reach beyond pinch welds

User questions & answers

Question:	Does the rapid pump continue after making contact with the vehicle
Answer:	Handles themselves are approximately 3 inches. Overall length of tools are approximately 5 inches. I don't use them constantly, but am always pleased when I do.
Question:	Does it come with a saddle pad
Answer:	Yes they do
Question:	Is this jack rebuildable? If so where can I find a seal kit
Answer:	No, it is made in China
Question:	What is the distance between the center of the saddle to the part of the body that gets taller
Answer:	Hello, I am a retired aircraft technician and have worked with tools my whole life. If you have access to a belt sander preferably a 1" or a bench top grinder with a real fine stone any side cutter can be carefully ground down on one side to make it flush cutting on that side. Just make sure to have a container of water near to keep the tool cool during the grinding process so that the temper is not effected. I have done this to many larger side cutters over the years to quickly trim small aluminum rivets that were too long when we were out of the correct length rivets and I also used these modified cutters to trim copper wire as well. The best tool for the job is the 1" belt sander that uses 30" belts is a great size for many uses in a DYI workshop and are not too expensive.

Product features

Sunex Tools 2 Ton Lowrider Service Jack (6602LP)

At Sunex Tools, we keep the user experience at the forefront of product design and development. When it comes to heavy duty repairs, leave the heavy lifting to Sunex.

Quality

Sunex lifting equipment endures rigorous ASME PALD compliance testing, ensuring high performance tools that last. All Sunex jacks are backed by our 1 year warranty.

Heritage

Since 1977, we at Sunex Tools have prided ourselves on being experts in the automotive repair industry.

Rapid Rise Technology

Rapid Rise Technology with double pistons achieves the max height of 24-inch in just 6.5 pumps.

Quick Release Handle

The two-piece pump handle provides extra leverage and is convenient to store is almost any work space.

Low Clearance

The ultra-low body design gives this jack a minimum height of only 2.75-inch, ideal for sports car.

High Reaching

With a maximum height of 24-inch, the 6602LP can also lift pick-up trucks and SUV's.

Product description

Sunex 1.75-Ton capacity aluminum roadside assistance jack is constructed of lightweight aluminum. Its features include a compact, folding design, allowing it to be stored away conveniently in tight spaces, a 39-pound easily transportable body, and Rapid rise technology with dual pump pistons that help it reach max height in under 5 handle Pumps.

• Full-featured, lightweight aluminum body design at 39 pounds allows user to transport easily
• Compact, folding design stores away conveniently in tight spaces
• Rapid rise technology with dual Pump pistons reach max height in under 5 handle pumps
• 1-Year Warranty

User questions & answers

Question:	Does the pad (the circular component with the rubber insert) screw up or down
Answer:	Usually you change the image orientation on the projector not the source. Check your projector Menu. You should find this option.
Question:	What is the height of the saddle with the jack at its lowest point
Answer:	No, the VGA2HDPRO2 has a maximum input resolution and refresh rate of 1920x1080 at 50Hz and supports a maximum refresh rate of 60Hz when running 480p or 720p. The output of the scaler is limited to the same refresh rate as the input. Matt, StarTech.com Support
Question:	Can the handle be removed
Answer:	No, the VGA2HDPRO2 will not be able to accommodate 848 x 480 @ 75hz. Atha, StarTech.com Support
Question:	Is the jack full aluminum
Answer:	Yes, the 3.5mm audio input for the VGA2HDPRO2 will also transmit onto the HDMI output port. Atha, StarTech.com Support

Product description

Sunex's 3-ton aluminum jack with 2 3-ton aluminum jack stands provides you with solutions that fit almost any application. Its features include a low profile, quick-lift technology, lightweight aluminum body, and rapid rise technology that reaches max height in only 7 pumps.

• Lightweight aluminum body nearly half the weight of steel jacks
• Rapid rise technology reaches max height in only 7 pumps without load
• Includes pair of 3 ton aluminum jack stands
• Low profile

User questions & answers

Question:	Could this be stored outdoors since it’s aluminum
Answer:	Short press MFB on side for play/pause or to answer or end phone call
Question:	How high does this go
Answer:	Yes they are
Question:	What does the hydralic jack alone weigh
Answer:	Hi, Thanks for your time on us. Sure friend, you can easily skip to next track or back to previous song through the multifunction button. Next track： Quick Double-Click on R earbud Volume +： Quick Triple-Click on R earbud Previous Song：Quick Double-Click on L earbud Volume - ：Quick Triple-Click on L earbud Hope this will help you a lot. If any other problem, pls contact via [email protected], we are glad to serve at you. Best regards, Vislla Team
Question:	Does it come with a case or is a case available? If not, not buying since it needs to be portable and stowable for me
Answer:	You can use just one. I do it all the time.

Product features

Vehicle Protection

Designed with a rubber saddle and a foam handle bumper.

Easy Jack Storage

Handle can be seperated into two pieces for easier storage.

Rapid Rise Technology

Dual pump pistons quickly raise the floor jack saddle to load.

Product description

The Sunex aluminum service jack with quick lifting system's contains rapid rise technology, which improves raise speed by reaching max height in just 5 pumps. Its side mounted handles provide quick and easy positioning and maneuveringwhile the rear mounted ball bearing swivel casters and wide track front wheels offer quick transport and positioning. Its thick frame side plates and reinforced lift arm provide added strength, chassis torsion control and durability, and overload and bypass safety valves prevent ram over extensions and use beyond the rated weight capacity.

• 1 YEAR WITH SUNEXPRESS: Get in the express lane with the industry’s leading program and exchange warranted products directly with Sunex.
• LIGHTWEIGHT AIRCRAFT-GRADE ALUMINUM: Allows for easy maneuverability.
• RAPID RISE TECHNOLOGY: Dual pump pistons quickly raise the floor jack saddle to load.
• REINFORCED LIFT ARM: Increases strength, chassis torsion control, and durability.
• VEHICLE PROTECTION: Designed with a rubber saddle and a foam handle bumper.
• SIDE-MOUNT HANDLE: Allows for convenient jack positioning.
• 2 PIECE HANDLE: Allows for easy storage.

User questions & answers

Question:	Can you remove the saddle and add a transmission adapter? If so, what size is it
Answer:	Depende on the jack. Pump hydrolic or, screw
Question:	What's the minimum lift height
Answer:	Never saw an atwood jack myself.
Question:	is this item made in AMERICA
Answer:	There is no pin. The crank and jack will seat together.
Question:	Is this the same jack at the jegs 80006 aluminum floor jack and a couple others that look the same? why does this one cost more
Answer:	Yes, same as drill adapter.

Product features

Vehicle Protection

Designed with a rubber saddle and a foam handle bumper.

Easy Jack Storage

Handle can be separated into two pieces for easier jack storage.

Rapid Rise Technology

Dual pump pistons quickly raise the floor jack saddle to the load.

Product description

Use for removal, installation and transporting of transmissions and transfer cases on vehicles that are supported by lifts. Foot activated pump pedal for hands free raising of the rams. Lowered telepscopic rams enable the transmission to be transferred from the jack to the work table and extended to reach a miximum height of 74. Foot activated release pedal provides slow controlled lowering of load. Universal saddle with four ratcheting arms quickly adjust to the transmission pan configuration.

• Foot activated pump pedal for hands free raising of the rams
• Extended to reach a maximum height of 74 inches
• Lowered telescopic rams enable the transmission to be transferred from the jack to the work table
• Nylon strap tie down secures the load to the saddle
• Overload valve prevents jack from being used beyond its rated capacity

User questions & answers

Question:	Who in my 91710 or nearby can do a warranty repair
Answer:	you should just throw it out.... mine lasted 4 weeks and leaks like crazy.... its total junk
Question:	Does foot pedal also work lowering the unit
Answer:	Foot activated release pedal provides slow controlled lowering of load.
Question:	what is the warranty? is it made in China
Answer:	The product is made in China, as for the warrenty I dont know, I have been using these jacks for the last 25 years,in my ten bay shop where we pull and install two to three transmissions a day as well as two to three fuel pump tank combos a week. We also use these jacks in our salvage yard operation where we pull three transmissions a day. I have four of these and they last a average of about two years before the seal starts to leak at the ram. The american made models worked no better and costed twice as much. I can afford to throw them away every two years compared to the overpriced american models.For the money these cant be beat.
Question:	WHAT IS THE WARRANTY TRANS JACK SUNEX 7793B
Answer:	Taken from the website: Sunex® Lifting Equipment carry a One Year Warranty. During this warranty period, Sunex Tools® will replace any unit which proves to be defective in material or workmanship. All floor jacks 3.5 ton in capacity and under will be replaced under the SUNEXpress™ Warranty.

Product features

Sunex Tools 1/2 Ton Telescopic Transmission Jack (7793B)

At Sunex Tools, we keep the user experience at the forefront of product design and development. When it comes to heavy duty repairs, leave the heavy lifting to Sunex.

Quality

Sunex lifting equipment endures rigorous ASME PALD compliance testing, ensuring high performance tools that last. All Sunex jacks are backed by our 1 year warranty.

Heritage

Since 1977, we at Sunex Tools have prided ourselves on being experts in the automotive repair industry.

Chain Tie Downs

Chain tie downs safely secures transmission to the saddle while a handle helps with positioning and moving the jack.

Oversized Foot Pedal

Foot activated pump pedal allows hands free raising of the transmission while foot activated release pedal allows hands free lowering

Swivel Casters

Wide base legs with swivel caster, polyurethane tread wheels provide stability and easy maneuverability even under load. Includes two locking caster wheels.

Product description

This product is ideal for lifting trucks, trailers, farm and construction equipment, especially where crowded conditions require single point contact but may be used in pairs. The 8-inch diameter pneumatic wheels make maneuverability easy, while an air valve provides speed control when lifting or lowering a load. The ridged saddle with locating lugs provides an excellent gripping service and the "T" handle and 8-foot air hose allow for remote safe positioning and operation.

• Narrow chassis design
• Wiper seals protect hydraulic system from contaminants
• Overload and bypass safety valves
• Self-retracting ram
• Integrated filter protects air motor

Product features

Stable Gripping Surface

Locating lugs and a ridged saddle provides and excellent and stable gripping surface.

Safe Positioning and Operation

T-handle and an 8 foot air hose allows for remote safe positioning and operation.

Easy Maneuverability

8 inch diameter wheels make maneuverability easy.

Product description

This pair of 3 ton aluminum jack stands feature six locking positions that allow secure loads in multiple heights. Item features a heavy duty flanged base and weighs less than 10 lbs. Backed by a 1 year warranty.

• 6 locking positions allow secure load in multiple height
• Heavy-duty flanged base safely secures load
• Ultra-lightweight under 10 pounds
• All backed by 1 year warranty

User questions & answers

Question:	is there a rubber pad for pinch weld seams to use on top of this set
Answer:	No.
Question:	How many jacks stands are included in this price
Answer:	It comes with one remote
Question:	What is the adjustment range on these
Answer:	All I can say is this kit will convert non convertible jacks and convertible. Maybe the other just does convertible jacks.
Question:	what is the base made of? Do you feel like you need a jack-pad for use thin pinch-weld
Answer:	Everything is included, it is a complete kit and comes in 2 boxes.

Product description

Used in pairs for supporting trucks, trailers, and equipment in fleet garages, agricultural, industrial and construction environments. Four leg steel base and support tube made of heavy schedule pipe for added strength and stability. Multiple hole locations in the support tube make pin facilitated height adjustment quick and easy. Height adjustment pin is attached to stand to prevent loss. Large saddle with locating lugs support and position vehicle frame.

• Item may ship in more than one box and may arrive separately
• Four leg steel base
• Made of heavy schedule pipe for added strength and stability.Base Length:38.27 inch
• Quick and easy height adjustment
• Large saddle with locating lugs support
• V shaped saddle to cradle axles or other under truck components
• Max Height 46.5-Inch

User questions & answers

Question:	What pad or cushion do you suggest to get for the top of these
Answer:	Nothing noticeable.
Question:	Can I use raising a deck
Answer:	My Sony TV brought from the US could not display the PAL signals coming from a European set-top box (even though the set-top box had a setting that supposedly would cause it produce an NTSC signal). This device solved the problem. I would assume it would work for you too.
Question:	What are the Minimum and Maximum height range in inches
Answer:	Yes, you can just connect to one input.
Question:	Where are these made
Answer:	This video converter is dual voltage and designed to operate on any voltage between 100-240V.

Product features

Large Saddle with Locating Lugs

Supports and securely positions the vehicle frame.

Attached Pins

Height adjustment pins are attached to the frame to prevent loss.

Four Leg Steel Base

Made with heavy-duty pipe for added strength and durability.

Product description

The Arcan ALJS3 3-Ton Steel Jack Stands has an overall 3-Ton lifting capacity and a working range of 11-5/8 in. to 17.5 in. A counterweighted pawl locks in place securely to prevent slipping, while allowing easy adjustments. A large contoured saddle with locating lugs helps support and position vehicle frame. The wide stance base delivers superior stability and includes base pads that prevents the jack from sinking into asphalt and provide stable footing for the jack stands. The welded construction and alloyed steel offer years of support. Arcan puts all of our lifting equipment through voluntary and rigorous third party safety testing, as outlined by the ASME PASE-2014 Safety Standard for Portable Automotive Service Equipment, to ensure that our products are among the safest on the market.

• COLORS MAY VARY: ALJ3T (silver) or A20018 (green)
• LIGHTWEIGHT AIRCRAFT-GRADE ALUMINUM: Allows for easy maneuverability.
• DUAL PUMP PISTONS: Quickly raises the floor jack saddle to load.
• REINFORCED LIFT ARM: Increases strength, chassis torsion control, and durability.
• VEHICLE PROTECTION: Designed with a rubber saddle and a foam handle bumper.
• SIDE-MOUNT HANDLE: Allows for convenient jack positioning.
• 2 PIECE HANDLE: Allows for easy storage.

User questions & answers

Question:	how smoothly and slow can a vehicle be lowered
Answer:	This fuel pressure reghulator is set at 43 PSI - identical to the OEM regulator. -Sean 818-574-FUEL
Question:	What is the height range
Answer:	Yes, this will fit the 2013-2018 Can-Am Maverick / Maverick Max 1000 . -Sean 818-574-FUEL
Question:	How big is the saddle and rubber pad on this jack
Answer:	This will be a 100% direct fit for the 2009-2018 Outlander 650. -Sean 818-574-FUEL
Question:	where is arcan made
Answer:	Yes, this will be a 100% direct fit for the 2013-2015 Can-Am Maverick 1000. -Sean 818-574-FUEL

Product description

Dead engines, locked Steering wheels, and small spaces are no problem for Sunex car Dollies. The 7708 can be used in singles, pairs, 3's, or 4's to move vehicles in any direction. Features include long aluminum rollers, safety locking casters, a large diamond-plate foot pedal, and a sturdy Ratcheting mechanism.

• Oversized l-shaped foot pedal protect user from jamming toes on wheel
• Sturdy ratcheting design is maintenance free unlike competitive Hydraulic units
• Convenient carrying handle for transportation
• Locking casters on outboard wheels secure vehicle and comply with asme-pald 2014 standards
• Convenient carrying handle into Side for portability
• 1 year warranty

User questions & answers

Question:	Would a 35x12.5 tire fit
Answer:	IIt should fit your tire OK but I have a Dodge 2500 My truck is too heavy it will not lift it I have to jack the tire up first put Dolly under the tire then remove the tire are use it mostly for rotate my tires i bought one but also this is not hydraulic it’s ratchet Hope this helps you
Question:	How far does the foot pedal area stick out from the car if it is under the wheel as far as it will go
Answer:	It would depend on the car and how far the fender flares.
Question:	I know the arms open up to about 28" span between them, but what is the minimum the close to? I have small diameter trailer tires 20.5x
Answer:	Open dimensions: ~31 outside of roller to outside of roller; ~25-1/2 inside to inside of rollers; Closed dimensions: ~15 outside to outside; ~9-1/2 inside to inside.
Question:	So this is just one
Answer:	Correct, it’s just one.

Product features

Safety Locking Casters

Designed to secure vehicles.

Built-in Handle

Designed to enhance portability.

Ratcheting Mechanism

Activated by foot petal to make the dolly lighter and more reliable.

Product description

The Sunex Rapid Rise Technology reaches max height of 19.3 inches in 7.5 pumps. Side mounted handles for easy jack positioning. Wide track wheels for easy maneuverability. Rubber saddle pad and foam bumper pad protect vehicle. Thick frame side plates and reinforced lift arm for added strength, chassis torsion control and durability. Wiper seals protect hydraulic system from contaminants. Overload and bypass safety valves prevent the jack from being used beyond its rated capacity and ram over extension. Ball bearing mounted rear swivel coaster wheels and wide track front wheels for easy maneuverability. Two piece handle for storage; quick lock feature for engagement and disengagement of handle halves.

• Rapid rise technology reaches max height of 19.3 inches in 7.5 pumps
• Side mounted handles for easy jack positioning
• Wide track wheels for easy maneuverability
• Rubber saddle pad and foam bumper pad protect vehicle
• Thick frame side plates and reinforced lift arm for added strength, chassis torsion control and durability

User questions & answers

Question:	what is the height of the jack in the back. Want to see if low enough to reach jack points under a Mercedes E350 behind engine
Answer:	I just measured it at 6-1/2". I hope this helps.
Question:	Is it possible to fully lower handle without raising jack? My vehicle has a deep jack point and need to have handle fully down without the jack rising
Answer:	My jack CAME WITH A BROKEN CASTER WHEEL. They would not replace the wheel, so i RETURNED the jack :(.
Question:	What is the size of the saddle
Answer:	The saddle is 4.5" diameter, the rubber pad insert on the saddle is 4" diameter.
Question:	How long is the warranty
Answer:	one year, see the Sunex site; https://sunextools.com/products/6603asj-3-ton-aluminum-service-jack/

Product features

Vehicle Protection

Designed with a rubber saddle and a foam handle bumper.

Easy Jack Storage

Handle can be seperated into two pieces for easier storage.

Rapid Rise Technology

Dual pump pistons quickly raise the floor jack saddle to load.