14 best jacking pads

Product description

Tested, Trusted And Backed By Our Top-rated Warranty

And Customer Service!

Protects Your Vehicle And Your Jack

Our jack pads sit on top of your jacks to provide protection and cushion when

lifting your car, both to the sensitive areas of the vehicle itself as well as

the jack that's doing the heavy lifting. No more damage to pinch welds,

paint scratches or metal damage.

Made From High Quality Material, Built To Last

Made from a blend of purpose-specific, highly durable rubber, our jack pads

are built to hold up to the rigorous needs of mechanics and DIY enthusiasts, alike.

Fits An Array Of Jacks, Stands And Vehicles

Our pucks are made to fit a wide array of jacks / jack stands and

vehicles. Their universal size allows them to meet a wide array of needs,

though exact fit will vary.

Value Pack

Our set includes two jack pads, providing the value you need to get the job

done right - without sacrificing quality.

Dimensions

Pad dimensions: 7.2 cm / 2.8 inches in diameter, 3.3cm / 1.3 inches tall. 2 per pack

• Protects Your Vehicle And Your Jack -- Our jack pads sit on top of your jacks to provide protection and cushion when lifting your car, both to the sensitive areas of the vehicle itself as well as the jack that's doing the heavy lifting. No more damage to pinch welds, paint scratches or metal damage
• Made From High Quality Material, Built To Last -- Made from a blend of purpose-specific, highly durable rubber, our jack pads are built to hold up to the rigorous needs of mechanics and DIY enthusiasts, alike
• Fits An Array Of Jacks, Stands And Vehicles -- Our pucks are made to fit a wide array of jacks / jack stands and vehicles. Their universal size allows them to meet a wide-array of needs, though exact fit will vary
• Value Pack -- Our set includes two jack pads, providing the value you need to get the job done right - without sacrificing quality.
• Dimensions -- Pad dimensions: 7.2 cm / 2.8 inches in diameter, 3.3cm / 1.3 inches tall. 2 per pack

User questions & answers

Question:	does this fit a Mini Countryman
Answer:	they go inside the jack cup.
Question:	How deep is the center cut
Answer:	Yes it does fit, 2016 Honda Civic, only thing is the handle is a little long but can make it fit too.
Question:	will this work on 2012 ford mustang convertible, 5.0 engine
Answer:	Not sure, it didn't work for the honda pilot as advertised- I ended up giving it away to someone with an accord. Will never buy from this vendor again. Waste of money!
Question:	does this fit over the jack cup or inside it
Answer:	Works very well on a 2016 and 2017 Honda Civic so it should work on the Acura

Product description

Description:

100% Brand new and high quality



Specifications:

Color: Black

Size: 6*2.6cm/2.36x1.02"

Material: Rubber

Qty: 4PC



Features:

▶Material - Made of high quality rubber; Securely fits into jack points;（Note: Pads must be removed before driving the vehicle.）

▶Fits models - Chevrolet Corvette C5 C6 C7 GS Z. (Fit 97-04 C5, Z06 Corvette, Z51, C6-Z06; 2005-2012 standard C6 Coupe and Convertible; 2014+ C7 Stingray. )

▶Warm Note - These jack pads will NOT work on a 2006-2012 C6 Z06, ZR1 or Grand Sport, please verify your model before purchse here, thanks !

▶Great Protection - Prevents rocker panel and jack point damages while jacking up your Chevrolet Corvette at factory jack points.

▶What's Inlcuded - 4PC x Jack Lift Point Pad Adapter; Quality Warranty: if you are not satisfied with these items, we promise to offer money back service; No worry to buy it anymore !



Products Included:

4PC x Jack Lift Point Pad Adapter



Notice:

Please check carefully to make sure whether the item matches to your vehicle or not.

Please allow 0.1-0.5cm difference due to manual measurement.

The color of the actual items may slightly different from the listing images due to different computer screen, thanks for your understanding.



★★★★★Service:

We are committed to providing excellent customer service with our Unconditional Free Replacement or Money Back.

• ▶Material - Made of high quality rubber; Securely fits into jack points;（Note: Pads must be removed before driving the vehicle.）
• ▶Fits models - Chevrolet Corvette C5 C6 C7 GS Z. (Fit 97-04 C5, Z06 Corvette, Z51, C6-Z06; 2005-2012 standard C6 Coupe and Convertible; 2014+ C7 Stingray. )
• ▶Warm Note - These jack pads will NOT work on a 2006-2012 C6 Z06, ZR1 or Grand Sport, please verify your model before purchse here, thanks !
• ▶Great Protection - Prevents rocker panel and jack point damages while jacking up your Chevrolet Corvette at factory jack points.
• ▶What's Inlcuded - 4PC x Jack Lift Point Pad Adapter; Quality Warranty: if you are not satisfied with these items, we promise to offer money back service; No worry to buy it anymore !

User questions & answers

Question:	What country are these made in? I do not want Chinese materials or products thank you
Answer:	I didn't see any printing on them and no paperwork came with them.
Question:	Ok, what about a 2013 grand sport? Description notes only 2006-2012, and each year model boasts minor revisions
Answer:	I know that my C5 convertible needed then, my sons C6 convertible and so does my C7 convertible. All these undercarriages have 4 slots at the jacking points that these fit into. I am quite sure that your does too, but you can look under the car and confirm it.
Question:	Will they work on 2019 C7 corvette ZR
Answer:	yep they work on my 19 C7 GS
Question:	How thick is the puck, not including the knob on top
Answer:	You do not want these pucks. The rubber is super cheap. I jacked up my car once. About 3/4 of of the way up the knob just tore off.

Product description

Corvette Lift & Jacking Pads

for the 2014+ C7 Stingray, Z51 and Z06

Note:Works on base C7, Z51 and Z06 Corvette. These will also work on C6-Z06!

• The highest quality all aluminum construction lift and jacking pads for Corvettes and other slotted hole frame designs
• Jacking Lift Pad/Pucks for the 2014+ C7 Stingray, Z51 and Z06
• NOTE: Works on base C7, Z51 and Z06 Corvette. These will also work on C6-Z06
• Insert the lift pad in to the frame rail slot, rotate, and release. The pads will stay in position while the lift arm or floor jack is positioned
• Pads must be removed before driving the vehicle

User questions & answers

Question:	Is this item a set of four
Answer:	yes this is a four pack.these pucks are better thasn th eone gm offers
Question:	Will these work on a 2020 C
Answer:	Yes, it works on C8 Corvette. The C8 and C7 use the same lift puck.
Question:	Will these work on a 2006 base model
Answer:	I am not sure as I am not familiar with the jack pad location and design on the 2006 Vette. There are jack pads out there for that specific model, I would go with that first.
Question:	What are the actual dimensions of the pucks? Diameter = ? Thickness
Answer:	Our car has ground effects so they work just fine when using a low profile jack at home. If no ground effects they should work with no issues If the car has ground effects, it is recommended to purchase the thicker ones because the dealership still requires the use of shims when the car is put up on a lift.

Product description

Lynx Recreational Vehicle Leveling Kit. Modular designed levelers not only configure to fit any leveling function, but they also withstand tremendous weight. To use: simply set them into a pyramid shape to the desired height that the RV needs to be raised and drive onto the stack. The levelers can also be used as a support base for other stabilizing equipment. Use under single and dual wheels, under tandem axles and under jacks. 8-1/2 inch x 8-1/2 inch with 1-1/2 inch thickness to give 1 inch lift. The 10 pack comes in an easy to store nylon bag and weighs less than ten pounds.

• Lynx Recreational Vehicle Leveling Kit, 10/Pack
• Modular designed levelers not only configure to fit any leveling function, but they also withstand tremendous weight
• To use: simply set them into a pyramid shape to the desired height that the RV needs to be raised and drive onto the stack
• The levelers can also be used as a support base for other stabilizing equipment

User questions & answers

Question:	I have a 30,000 lb. motorhome and wonder what is the best product for putting under leveling jacks
Answer:	My Class A motorhome has a GVW of 26,000 pounds and I've used the Lynx leveling blocks and caps under my rear hydraulic leveling jacks, where most of the weight is, without a problem.
Question:	Is this made in USA
Answer:	Yes, they are made in the USA
Question:	This 10 pack results in 3 inches of lift, correct? (Can't find that detail on this Amazon page
Answer:	By the way, the full 4-3-2-1 arrangement will give you about 4.5" of lift. You would need all 20 from 2 sets, and not have enough land to build in the center. To get 4 levels under each wheel, you would have to place all 20 from 2 sets, pulling forward and backward a few times, while you build each stack. We've never needed more than 3 levels.
Question:	How are these for use on dirt/gravel/grass un-level ground (campsite)? I would be using these in campgrounds to drive my 81 VW Vanagon up on
Answer:	These are specifically made for unlevel conditions. The only concern is you have to watch the gravel. You don't want big chunky rocks under these. I had to buy two kits as one wasn't enough. I use them on a 12k Lb tandem axle 38 ft 5th wheel. Takes 3 under each wheel for me just for starters then one under the landing gear and rear stabilizers. That's 16 and gives me 4 more to add to the low side. If the campsite it any more out of level then that I don't want to park there anyhow.

Product features

Lynx Leveler - RV Leveling Blocks

Lynx Levelers provide a safe and easy way to level most vehicles.

10 Year Warranty

The best just got better. Now you can easily register your Lynx Levelers on our website and stay level for longer than ever.

The Original RV Leveling System

Tri-Lynx has been providing RV leveling systems and RV accessories since 1993.

Products Designed With the User in Mind

Lynx Levelers interlock, easily store and come with a tough nylon storage bag.

Made in the USA

All Lynx Levelers are manufactured in America. Look for the Orange... Look for Lynx.

Product description

★ Swpeet 4 Pack 2 Types Sparta Floor Jack Pad Adapter for Jack Stand 2-4 ton Universal Rubber Sparta Floor Slotted Frame Rail Pinch Welds Protector



▲【 WHY CHOOSE US?】

✔ 1,This is the best solution for using floor jack in an attempt to avoid the floor jack damaging your undercarriage or slipping.



✔ 2, Heavy duty rubber material can use for a long time while soft rubber surface will not scratch painted or undercarriage.



▲【 Specification:】

1, Round Type Jack pads Size:

★ Diameter: 75mm

★ Height: 35mm

★ Groove Width: 10mm

★ Groove Depth: 15mm

★ Please check dimensions and ensure fitment to your floor jack and vehicle.



2, V Type Jack pads Size:

★ Length: 63mm

★ Hight: 50mm

★ Width: 44mm

★ Groove depth: 17mm



3, Product Details: ★ Color: black

★ Quantity: 4 pieces

★ Load Bearing: 3-4 Ton

★ Material: Heavy duty rubber



▲【Package Included】

★ 2Pcs x Round Type Jack Stand pads

★ 2Pcs x V Type Jack Stand pads

★ In total 4Pcs



▲ ADD TO YOUR CART NOW!

★ This product is sold with a full 30-day money-back guarantee. If you're dissatisfied with your purchase for any reason, contact us for a replacement or refund. Go ahead to add the item to your shopping cart and check out, you will not be disappointed.

• 🚗 【 High Quality】 ------ Made of heavy duty construction and durable rubber material for 2-4 ton floor jack. Maximum load bearing: 2-4 Ton.
• 🚗 【Universal for Most Car 】------The jack pad adapter fits most jacks and vehicles and can work great with jack stand, specifically compatible with Torin Big Red T43002. But NOT fit for Torin T42002. Please verify dimensions and ensure fitment to your jack and vehicle.
• 🚗【Size】Round Type Jack Pads: 75mm Diameter 35mm Height, Slot Dimensions: 10mm Wide 15mm deep. V-Type Jack Pads: Length-63mm, Hight-50mm, Width-44mm, Groove depth-17mm.
• 🚗【The Best Protection for Your Car 】------ Sparta jack pad adapter is a great protector to prevent your frame rail, specifically pinch welds from bending or scratching while using with a car jack stand.
• 🚗【Package includes】------ Our set includes 4Pcs jack pads, Incuding 2Pcs Round Type Jack Pads and 2Pcs V-Type Jack Pads providing the value you need to get the job done right - without sacrificing quality. What's more, they're backed by our 100% manufacturer's warranty - if you aren't happy for any reason, return it for a full refund.

User questions & answers

Question:	How well do the rectangular ones fit on Craftsman 4 ton stands, the black ones with the yellow saddle risers
Answer:	I don’t think that would work unless you have about a 3 inch wide steel plate to put between the jack and rubber jack pad.
Question:	Do the round pucks have a recess underneath to fit on round jack stand or are they flat underneath
Answer:	I think you’ll need the Bluetooth adaptor one, since iPhone X doesn’t have a headphone jack. I have the 6+ still and it works great :)
Question:	Will this work on infiniti fx
Answer:	Yes.
Question:	One of pictures show a bottle. Are some of these for bottle jacks? I have a 4 ton bottle jack with 1" saddle. Would these work for me
Answer:	Not sure. I have a 2010 A5 and it worked, although the one I received was defective. I’m waiting in the replacement but I fear the same issue will occur

• 【High Quality】Heavy duty construction rubber material，MAXIMUM Load Bearing: 3 Ton; Made of Durable rubber construction and cross slotted design, provides more cushion and crush resistance.
• 【Fits most Floor Jacks and vehicles】Fits most Jacks and vehicles, please verify dimensions and ensure fitment to your vehicle.
• 【Size】Diameter: 125mm/4.92inch. Thickness: 26mm/1.02inch. This product is used to protect the car undercarriage metal jack point railing that is on most vehicles.
• 【Jack Support Cushioning Pressure Pad】Prevent your frame rails from bending when using a Jack to lift your car. Soft rubber surface, do not scratch painted or coated chassis parts.
• 【Package includes】1 x jack pad; By the way,Satisfaction Warranty: any dissatisfaction please contact us for help/support. Small tips: because it is newly factory production and heavy duty rubber material, so it will have a little bit rubber smell, please put it in the ventilation room for some while !

User questions & answers

Question:	How much does this add to the height of a harbor freight jack? (i have a non-low-profile and last puck i bought didn't fit under 5" clearance
Answer:	About 1/2 inch. Good product. Has worked well with my harbor freight low profile jack.
Question:	The steel lifting pad on my jack is 5 inches in diameter will this fit
Answer:	I have a Pittsburgh jack with a 4.25 inch platform and it fits perfectly by slipping over pad. A 5 inch diameter lifting pad will be too big.
Question:	any pad adapter recommendations for a 2013 tundra
Answer:	I used this pad on my 2017 tundra. Both on the frame and the rear diff. Worked great.
Question:	Where does this jack pad ship from? is there a usa based seller? or is it being shipped from china
Answer:	Mine came from the US, probably not made in the US.

Product features

GeeWatom Universal Floor Jack Rubber Pad Jack Pad Adapter Pinch Weld Side Frame Rail Protector Puck/Pad

• Universal Floor Jack Rubber Pad
• Made of Durable Rubber
• Easy to Use
• Fits Most Floor Jacks and Vehicles
• MAXIMUM Load Bearing: 3 Ton
• SAFELY LIFT YOUR VEHICLE WITHOUT DAMAGE ！！！

HIGH QUALITY

• Heavy duty construction rubber material，MAXIMUM Load Bearing: 3 Ton;
• Made of Durable rubber construction and cross slotted design, provides more cushion and crush resistance.

SUITABLE SIZE

• Diameter: 4.92". Thickness: 1.02".
• This product is used to protect the car undercarriage metal jack point railing that is on most vehicles.

EASY TO USE

• This floor jack rubber pad is constructed from stiff rubber that cushions your car from damage and increases safety when secured properly.
• Fits most Jacks and vehicles, please verify dimensions and ensure fitment to your vehicle.

SAFELY LIFT YOUR VEHICLE WITHOUT DAMAGE ！！！

• Prevent your frame rails from bending when using a Jack to lift your car.
• Soft rubber surface, do not scratch painted or coated chassis parts.

Perfectly Fitment

• Fits most Jacks and vehicles,Our Universal Floor Jack Pad was perfect for Pittsburgh Automotive 3 ton floor jack from Harbor Freight, model # 64266.
• Highly durable and resistant to damage, it will prevent the chassis rails from getting pinched, bent and broken. Grooved texture design, non-slip design to ensure the safety of packaging cars and personnel when repairing vehicles.
• Top side of car jack pad has slotted crosshairs to align with and protect side pinch welds，Prevent your frame rails from bending when using a Jack to lift your car.

SAFELY LIFT YOUR VEHICLE WITHOUT DAMAGE！！！

• Protect your car！！！
• Small tips: because it is newly factory production and heavy duty rubber material, so it will have a little bit rubber smell, please put it in the ventilation room for some while ! ! !

Product description

Easycosy universal jack pad adapter

Easy to use: When using Jack to lift your car. Use this jack-pad adapter to prevent the frame rails from bending and to prevent the chassis components from painting or scratching the coating.

Jack pad adapter size:

12.5 cm*12.5 cm*2.6 cm(4.92 in*4.92 in*0.98 in)

Load bearing: 4 ton

Wide application: Jack Pad Adapter fits most Japanese and domestic made cars. It can be used to protect the chassis metal jack railings on most vehicles.

Whether it is maintained at home, in a car repair shop or on the road, the jack pad can be used to cooperate with jack to repair his own car. Placing jack pad on the car will not take up too much space, and it can protect the car well during maintenance.

Features: 

Durable, before each shipment, we will rigorously test the jack pad in order to ensure the quality of it. Our jack pad adapter havegood durability. it will keep the chassis rails from getting pinched, bent, and broken.

Package includes: 

1×Jack Pad

Note: 

There may be a little rubber smell when you receive the package for the first time.

Because this jack pad make of rubber. If you does’t like the smell, you can put the rubber block in a ventilated place, after a period of time, the smell will be dissipated.

• Material: Our jack pad made of hard rubber, rigid enough to support the weight of the vehicle, soft enough to prevent damage to the metal of the car chassis
• Product size: The jack pad adapter bottom diameter-12.5cm (4.92 in)Top diameter- 12.5cm(4.92in) Height-2.5cm(0.98in) Groove width-0.8cm(0.31in) Load bearing 4 ton.
• Jack pad features: Highly durable and resistant to damage, it will prevent the chassis rails from getting pinched, bent and broken. Grooved texture design, non-slip design to ensure the safety of packaging cars and personnel when repairing vehicles.
• Easy to carry: suitable for DIY vehicle maintenance or carrying in the car, carrying to the repair shop can have better protection of your car's pinch point and paint than the tire shop's rubber pad to reduce the occurrence of rust.
• Customer service：Friendly customer service, if you have any product problems, please feel free to contact us. We provide 18 months warranty service.

User questions & answers

Question:	Does this fit harbor freight daytona 3 ton low profile model # ds300lpbl floor jack
Answer:	Yes it fits it
Question:	The ad says 1 pair which normally means 2 pieces, but in the product desc says 1×jack pad. is 2 pieces/pads or only 1? if only 1 pad, pls correct
Answer:	I don't know why Amazon is asking to answer this question. I didn't buy this. I bought this: https://www.amazon.com/gp/product/B07V32536W/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1 and it included two pieces.
Question:	Does it fit 2016 Fiat 500X
Answer:	If it has a pinch weld. But I found it does not work well on a 2015 Kia Optima because the excess pad pushs into the plastic molding on the body panel. I was worried it would damage the molding but it came back out to it's original form. Won't use on that car again.
Question:	On the Arcan jack, do you have to remove the factory pad or will this fit over it
Answer:	This fits over on my Pittsburgh jack which has no pad to remove.

Product description

Description:

100% Brand new and high quality

Specifications:

Color: Black

Size: 6*2.6cm/2.36x1.02"

Material: Rubber

Qty: 4PC

Features:

✔️Material - Made of high quality rubber; Securely fits into jack points;（Note: Pads must be removed before driving the vehicle.）

✔️Fits models - Chevrolet Corvette C5 C6 C7 GS Z. (Fit 97-04 C5, Z06 Corvette, Z51, C6-Z06; 2005-2012 standard C6 Coupe and Convertible; 2014+ C7 Stingray. )

✔️Warm Note - These jack pads will NOT work on a 2006-2012 C6 Z06, ZR1 or Grand Sport, please verify your model before purchse here, thanks !

✔️Great Protection - Prevents rocker panel and jack point damages while jacking up your Chevrolet Corvette at factory jack points.

✔️What's Inlcuded - 4PC x Jack Lift Point Pad Adapter; Quality Warranty: if you are not satisfied with these items, we promise to offer money back service; No worry to buy it anymore !

Package Included:

4PC x Jack Lift Point Pad Adapter

Notice:

Please check carefully to make sure whether the item matches to your vehicle or not.

Please allow 0.1-0.5cm difference due to manual measurement.

The color of the actual items may slightly different from the listing images due to different computer screen, thanks for your understanding.

• ✔️What's Inlcuded - 4Pcs x Jack Lift Point Pad Adapter; Quality Warranty: if you are not satisfied with these items, we promise to offer money back service; No worry to buy it anymore!
• ✔️Material - Made of high quality rubber; Securely fits into jack points;（Note: Pads must be removed before driving the vehicle.）
• ✔️Fits models - Chevrolet Corvette C5 C6 C7 GS Z. (Fit 97-04 C5, Z06 Corvette, Z51, C6-Z06; 2005-2012 standard C6 Coupe and Convertible; 2014+ C7 Stingray. )
• ✔️Great Protection - Prevents rocker panel and jack point damages while jacking up your Chevrolet Corvette at factory jack points.
• ✔️Warm Note - These jack pads will NOT work on a 2006-2012 C6 Z06, ZR1 or Grand Sport, please verify your model before purchse here, thanks!

Product description

DEDC 4 Pack Universal Rubber Jack Pad for BMW and Mini Slotted Jack Pad Frame Rail Protector



Rubber block



Product Descrition:

Brand: DEDC

Material: rubber (About odour: it's normal as the jack pads are new and odour will disappear a few days later. Besides the upgraded version is much better now.)

Dimension: pad: diameter 68mm/2.67in Height 9mm/0.35in

square: length 52.8mm/2.07in Height 11.5mm/0.45in



Made from reinforced rubber, this adapter can stop your BMW jacking point from being damaged.

Fitment:

MINI R50, R52, R23, R55, R56, R57, R58, R59, R60, R61 (2001-Present Coupe, Convertible, Hatch, Clubman, Clubvan)

BMW 1-series E81, E82, E87, E88, 1M, F20, F21

BMW 2-series F22, F23

BMW 3-series E46, E90, E91, E92, E93, F30, F31, F80 M3

BMW 4-series F32, F33, F36, F82 M4

BMW 5-series E39, E61, E60, E63, F07, F10, F11, M5

BMW 6-series E63, E64, F06, F12, F13, M6

BMW 7-series E38, E65, E66, F01, F02

BMW Z4, M-Roadster/Coupe E85, E89

BMW X Series E84 X1, X3 E83, F2



Key Features:

Protect your frame rails when jacking up the car with these jacks.

Without proper support, thin rails can bend and cause them to be used in the future, if the jack cannot be fixed to the jack point, even if it is not safe.

Suitable for most BWM & Mini jacks and vehicles.



Use Tips:

For vehicles that are too low, in an emergency or in your local tire shop, it is often necessary to use the apex of the factory side

NOTICE:

Please check the equipment below. It is not suitable for lever jacks.

Please take appropriate safety precautions when working on your vehicle.



Package Includes:

4 pack rubber jack pad for BMW Mini

• BMW Mini Universal Jack Pad; Maximum Load Bearing: 2 Ton;
• Durable rubber structure could be used for many times and for a long time. Notice: About odour: it's normal as the jack pads are new and odour will disappear a few days later. Besides the upgraded version is much better now.
• Perfect fit BMW & Mini: MINI R50, R52, R23, R55, R56, R57, R58, R59, R60, R61 (2001-Present Coupe, Convertible, Hatch, Clubman, Clubvan); BMW 1-series E81, E82, E87, E88, 1M, F20, F21; BMW 2-series F22, F23; BMW 3-series E46, E90, E91, E92, E93, F30, F31, F80 M3; BMW 4-series F32, F33, F36, F82 M4; BMW 5-series E39, E61, E60, E63, F07, F10, F11, M5; BMW 6-series E63, E64, F06, F12, F13, M6; BMW 7-series E38, E65, E66, F01, F02; BMW Z4, M-Roadster/Coupe E85, E89; BMW X Series E84 X1, X3 E83, F2
• Please ensure proper floor jack sizing before purchase. It is not suitable for lever jacks. Please take appropriate safety precautions when working on your vehicle.
• Protects Pinch Weld Seams and Frame Rails from bending or breaking when jacking up your car with these jack pads.

User questions & answers

Question:	will these for for a E36 M
Answer:	Well, I do not have an e36, but I do use these on my e90 and f87. I am not 100% sure, but I am with the understanding these work with all later BMW’s. I also have a set of anodize aluminum pads as I keep a set in each car. Sorry for not being able to be more specific. I would suggest you simply go to your e36 and measure the pads and compare them with the dimensions.
Question:	Will these work for a 2017 BMW i
Answer:	Hi, No the correct jack pad for this vehicle can be purchased here: https://www.partsgeek.com/gbproducts/SC/129823-08057405.html?utm_source=google&utm_medium=ff&utm_content=SC&utm_campaign=PartsGeek+Google+Base&utm_term=2014-2019+BMW+i3+Jack+Pad+Vaico+51+71+7+042+974+14-19+BMW+Jack+Pad+2018+2016&fp=pp&gbm=a&utm_source=google&utm_medium=ff&utm_campaign=PartsGeek+Google+Basecid=6774379819&aid=79287199093&keyword=297782119414%3A%3Apla-297782119414&kid=297782119414&gclid=EAIaIQobChMIuteNiO_J5wIVWR-tBh15EwHBEAQYAyABEgKK7fD_BwE
Question:	Hi, how much is the total weight for four pads
Answer:	They are smaller than hockey pucks so total weight of all 4 is under a pound

• Fits most Jacks and vehicles, compare dimensions and ensure fitment to your vehicle
• Prevent your frame rails from bending when using a jack to lift your car
• High density rubber construction, textured top to help prevent slip. prevent scratching coated surfaces
• Intersection style two row of slots to allow easier line up when under car
• Dimensions: Length 5 1/2” Height 1 3/4” Sloth Width 3/8” Slot Depth 3/4”

User questions & answers

Question:	my Pittsburgh saddle is just under 4 inches in diameter. This says it is 5.5 inch in diameter - what is the diameter of the smaller saddle circle
Answer:	The main ridge under this pad is 4" across, and would best fit a saddle with an I.D. larger than that. But, there are also four wide slots designed to catch the tabs on a smaller saddle and center this adapter pad on the saddle. The rubber is fairly hard and rigid, but it could be trimmed to fit if necessary.
Question:	Will this support a 4500 pound vehicle without splitting
Answer:	I'm sure it depends on how you intend to support the vehicle. The vehicles I have supported on four of these (each arm of a two-post lift) have left small indentations but not cut through them by any means. I don't know the vehicle weights offhand, but all are passenger cars, minivans, and SUVs.
Question:	Will this work with the Harbor Freight jacks
Answer:	Yes unless it's the smaller Trolley Jack
Question:	Whtat is the minimum width on bottom. It looks like it fits 3 58" saddles
Answer:	The saddle is a somewhat complex molding: There are two round projections from the bottom of the saddle: the first is 4 1/2" wide/ 1/4" deep with four indentations that will fit around the usual four fingers/tabs on many floor jack saddles. and the second projects from the bottom of that and is 4" wide and 3/8" deep which appear to be intended to fit in the smaller saddle cup of other jacks. It appears that a picture cannot be attached to this message, which would have been clearer.

• Maximum Load Bearing: 2 Ton; UNIVERSAL:Fits most Jacks and vehicles, please verify dimensions and ensure fitment to your vehicle.
• DURABLE: Durable rubber construction, medium size provides more cushion and crush resistance.
• USEABLE: Protects Pinch Weld Seams and Frame Rails from bending or breaking when jacking up your car with these jack pads.
• HELPFUL: Prevent your frame rails from bending when using a Jack to lift your car. Soft rubber surface, do not scratch painted or coated chassis parts.
• DIMENSIONS: 75mm Diameter 35mm Height, Slot Dimensions: 10mm Wide 15mm deep.By the way,this rubber jack pad smells like rubber is supposed to smell,a little bit stinks when new.

User questions & answers

Question:	Will this fit the factory jack points on a 2012 vw touareg? The factory jack points have plastic covers over them. Not sure if puck diameter is too w
Answer:	Yes, it’ll do fine. It’s slightly larger diameter than a hickey puck and twice the thickness.
Question:	Will this work with a bottle jack
Answer:	The bottle jack may not have enough stability to hold the 4 inch wide pad. If the bottle jack is wide enough, you should be fine. I recommend you use it with a floor jack so nobody gets hurt.
Question:	need jack pads for 1992 corvette
Answer:	Yes the 92 Corvette has a pinch weld, but I always would use a floor jack under the engine cradle or the front lower control arm on the front and best for the back is the floor jack under the differential. You may need to drive the car on a 2x4 or two to make that work. The 93-2002 Camaros jack on the pinch weld on the front so these help a lot.
Question:	Will this fit the factory jack points on a 2019 buick regal tourx - station wagon
Answer:	You can as long as the area to be used is the weld point (factory jack points). I suggest opting for the larger size if possible or get both sizes.

Product features

DEDC Jack Pad

• About odour: it’s normal as the jack pads are new, and odour will disappear a few days later.
  
  Besides the upgraded version is much better now.
  
  
  
  Tips to remove the odour if you care much:
  
  Immerse jack pad inside mixture of water and Hydrogen Peroxide (buy from pharmacy and shops) for some time and then take it outside and dry in the air, ordor will disappear.
  
  
• This is a must have product for any professional or home mechanic. Many car and truck Repair Manuals will tell you to jack up your vehicle by the standard jack points which can be on the pinch seam weld or the frame rail.
• Often times for vehicles too low or in an emergency situation the factory side jack points need to be utilized. Protect your frame rails when jacking up your car with these jack pads. Without proper support the thin rails bend and cause future use of them to be problematic,and even unsafe if the jack cannot secure to the jack point.

• __MAXIMUM Load Bearing: 3 Ton; Made of Durable rubber construction and cross slotted design, provides more cushion and crush resistance.
• __UNIVERSAL: Fits most Jacks and vehicles, please verify dimensions and ensure fitment to your vehicle. This saddle pad was perfect for Pittsburgh Automotive 3 ton floor jack from Harbor Freight, model # 64266.
• __Size: Diameter: 125mm. Thickness: 26mm. Jack pading/puck/caps: This product is used to protect the car undercarriage metal jack point railing that is on most vehicles.
• __Prevent your frame rails from bending when using a Jack to lift your car. Soft rubber surface, do not scratch painted or coated chassis parts.
• __Package includes: 1 x jack pad; By the way, this rubber jack pad smells like rubber is supposed to smell, a little bit stinks when new.

User questions & answers

Question:	What is the inside diameter? And the depth of the inside pocket? Looking to custom fit to an antique hoist
Answer:	The inside diameter is 4-1/2". There is a 1/4" pocket that runs around the inside rim that is 1/2" deep but the flat surface that will sit on the jack is 1/4" deep.

Product features

DEDC Floor Jack Rubber Pad Universal Jack Adapter Pinch Weld Side Frame Rail Protector Puck/Pad

• DEDCAUTO, We provide many kinds of rubber jack pads, you can see in our store or in the bottom of this product.
• Products Quality is Excellent !
• Welcome to choose what you need from here !

High Quality Rubber Material, You will get what you see !

Main Features:

• __MAXIMUM Load Bearing: 3 Ton;
• __UNIVERSAL: Fits most Jacks and vehicles, please verify dimensions and ensure fitment to your vehicle.
• __This saddle pad was perfect for Pittsburgh Automotive 3 ton floor jack from Harbor Freight, model # 64266.

Pinch Weld Protector

• __Made of Durable rubber construction and cross slotted design, provides more cushion and crush resistance.
• __Fits most Jacks and vehicles, This saddle pad was perfect for Pittsburgh Automotive 3 ton floor jack from Harbor Freight, model # 64266.
• __Prevent your frame rails from bending when using a Jack to lift your car. Soft rubber surface, do not scratch painted or coated chassis parts.

Premium Quality

Material

• Made of Durable rubber construction and cross slotted design, provides more cushion and crush resistance.

Perfectly Fitment

Fitment

• Fits most Jacks and vehicles, please verify dimensions and ensure fitment to your vehicle.
• This saddle pad was perfect for Pittsburgh Automotive 3 ton floor jack from Harbor Freight, model # 64266.

Accurate Dimension

Size

• Diameter: 125mm. Thickness: 26mm.
• Jack pading/puck/caps: This product is used to protect the car undercarriage metal jack point railing that is on most vehicles.

Great Protection Function

Frame Rail Protection

• Prevent your frame rails from bending when using a Jack to lift your car.
• Soft rubber surface, do not scratch painted or coated chassis parts.

• Durable polyurethane construction, medium size for added cushion and cross hatched pattern for added grip
• Designed to be sturdy enough to support your lift point while soft enough to preventing crushing the contact area
• Prevent your OE jack point pinch welds from bending when using a Jack to lift your car
• Fits most Jacks and vehicles, please verify dimensions below to ensure fitment
• Pad Dimensions: 72mm Diameter 33mm Height, Slot Dimensions: 10mm Wide 13mm deep, does not fit Trolley Jacks

User questions & answers

Question:	The ad states "does not fit Trolley Jacks" but uses a photo of the device on a trolley jack. What prevents it
Answer:	The jack in the photo is not a trolley jack but a standard floor jack. Trolley jacks are smaller and require a much smaller jack pad.
Question:	Is the slot the right depth for an 8th generation Honda Civic (2006 through
Answer:	The dimensions are listed in the bullet points, they generally will fit most cars. You can measure your pinch weld depth to verify fitment.
Question:	Are these more durable than the black rubber ones sold by most other brands
Answer:	Its hard rubber.
Question:	Is this a good fit for Audi Q
Answer:	Works fine on my 2018 SQ5.

Product description

This is a universal floor jack pad adapter meant to protect the pinch weld/seam on your vehicle from damage when being jacked



Feature:

1-This universal rubber pad is used to protect the undercarriage metal jack point railing that is on most vehicles.

2-Durable and resistant to damage, it will keep the chassis rails from getting pinched, bent, and broken.

3-Polyurethane is soft enough to not harm your vehicle's metal yet rigid enough to support it.

4-Great for DIY vehicle maintenance or taking one with you in the car as some tire shops do not use these pads, and unfortunately bend your pinch/scrape off paint on the welds. This can eventually lead to rust, save yourself the hassle with this simple product.

5-Fits most floor jacks and lifts.



Specification:

Color:Black

Material:Rubber

Size:Approx. 6.5x3.3cm



Package Included:

2 X Rubber Pad



Note:

Please allow 1-3cm (0.4-1.18") difference due to manual measurement and slight color variation for different display setting

Due to the difference between different monitors, the picture may not reflect the actual color of the item

• ★Jack Pad Application: This Universal Jack Pad Adapter used to protect the undercarriage metal jack point railing that is on most vehicles, fits various Domestic USA, Japanese, and European Vehicles
• ★Protect Your Car: Durable and resistant to damage, it will keep the chassis rails from getting pinched, bent, and broken.Prevent your frame rail pinch welds from bending when using a jack to lift your car
• ★Load Bearing Design: Designed to be sturdy enough to support your lift point while soft enough to preventing crushing the contact area
• ★Extra Grip: When lifting the car,the rubber pad adds extra grip, reduces slippage and stabilizes.Suitable for car maintenance repairment
• ★Stand Jack Pad: Great for DIY vehicle maintenance or taking one with you in the car as some tire shops do not use these pads,and unfortunately bend your pinch/scrape off paint on the welds. This can eventually lead to rust, save yourself the hassle with this simple product.Fits most vehicles and floor jacks, please ensure fitment by checking listed dimensions

User questions & answers

Question:	what is the diameter of the round stem on the bottom
Answer:	dear,this is a good question. You can see our jack pads size picture show it,the diameter of the round stem on the bottom is 4cm。 Thank you
Question:	What is your jack pad sizes,will this work on my ford mustang gt
Answer:	Hi, our this car jack pad size is: Approx. 6.5x3.3cm and it will good work one your ford mustang gt or other cars
Question:	Will this work on my 2003 toyota corolla? using a two ton trolley jack
Answer:	Yes... they will working good on your toyota corolla,you can have a try.