13 best eagle motorcycle jacks

• This is highly durable
• Patented design features both a removable Lift saddle and padded Lift rails
• Lifting capacity of 4, 000 pounds
• Locking safety bar holds jack in place once raised
• Easily lifts cars, trucks, atvs or removing/replacing transmissions or differentials.Handle Length:40 inches
• Patented design features both a removable lift saddle and padded lift rails
• Flexible design allows the Triple Lift to adapt to multiple types of vehicle frames

User questions & answers

Question:	Does it work on 3 ton jack stand too
Answer:	Yes, I used it to raise an air conditioning unit out of the windowsill.
Question:	how high does that jack go off the ground? I need
Answer:	Yes it should work with a 650. Really any motorcycle, scooter. You would slide it in between the front and rear wheel not centered but balanced. I welded tabs and bolted to my table. Then I welded a ring on both sides for a ratchet strap. It is very strong, reliable and sturdy. Use a 7/8 socket to lift and lower the scissor jack it works better than the hand crank that comes with it. Definitely a good buy. Hoping this helps- Mickey
Question:	I was curious with the jack fully extended, what is the height of the jack? I have a Toyota FJ with a 3 inch lift which puts it at 11 inches
Answer:	I like the jack my Harley limited loaded weight at least 900 lb picks it up but no problem good Jack just don't use a air gun on it you got to use a hand ratchet
Question:	what is the minimum height required for this jack to slide under? I need to determine if it will fit under my car
Answer:	Dear customer, our lift is mainly used to lift motorcycles for maintenance. And the weight capacity is 1100 lbs. For safety reasons, we do not recommend that you use it to lift your pool table.

Product features

Powerbuilt 2 Ton Triple Lift Floor Jack

Get rid of your floor jacks, transmission jacks and ATV jacks. The 2 Ton Triple Lift jack is three jacks in one! This innovative jack has a patented design that lets you lift cars, trucks, motorcycles or ATVs with ease.

The Triple Lift slashes the expense and hassle of purchasing, maintaining and storing multiple jacks and jackstands. It's the one jack that easily lifts almost anything with wheels, and works on vehicle transmissions and differentials too.

The secret to the Triple Lift is the patented design that features both a removable lift saddle and padded lift rails. This flexible design allows the Triple Lift to adapt to multiple types of vehicle frames.

A locking safety bar holds the jack in place once the vehicle is raised, which eliminates the hassle of supporting a lifted vehicle with jack stands. Built-in tie-down loops make it easy to secure motorcycles in place for added stability.

Product description

💖Trihelper Electric Car Jack Quick Scissor Jack 2 Ton

Electric car jack is a necessary auto repair tool, especially when you are far away from vehicle repair shops or like long-distance travel. This car jack kit is designed to save your effort and time, suitable for sedans under 2 ton, just flick a button, a car will be lifted, instead of tedious manual disassembly, whether men or women can easily change the tire with ease in any emergent case.



💖Specification

Input Voltage: 12V DC

Max Loading: 2T (4409 lb)

Lifting Height Range: 4.72-13.77 inches

Power Cord Length: 11.5 feet



💖Attention:

1. Never use electric car jack on sloped ground, be sure to use it on flat ground.

2. Do not exceed the limit of load bearing capacity, the car jack is only applicable to vehicles within 2 ton, vehicles beyond 2 ton is not supported.

3. To ensure sufficient electricity, it is better to start the vehicle before using the electric jack.

4. When the electric car jack is working, please do not get too close to the car and touch it with your fingers to avoid personal injury.

5. Please pay attention to the positive and negative terminals of the battery, do not reverse the position of the battery clips when connected to the car battery (DC 12V).

• ⚠Note: Never use it on sloped ground, be sure to use it on a flat road and place in the direction parallel to the car.🧰It takes about 1-2 minutes for the jack to reach a max. height (13.77in) with max. load capacity of 2 ton, lifting range 4.72-13.77in. This electric car jack is designed for most sedans to save your effort and time, perfect to deal with a flat tire and an essential repair tool when run into roadside emergencies.
• 🧰Best Choice for Sedan: Use high standard cold-rolled steel which has strong bearing capacity and is not easy to be deformed. Designed with an extra-wide base which adds stability and strength, reinforced solid screw rod makes the electric car jack will not easily be torn apart or twisted. Built-in LED lights on the button are bright enough to change tires in the dark. Sedans under 2 ton can be easily lifted.
• 🧰Safety Guarantee: When the car jack reaches the maximum height, it will stop working automatically. The protruding particles on the top of the jack head can increase the friction. The self-locking structure of the jack can prevent the car from falling suddenly and ensure the safety of the car and people. The internal circuit breaker of the jack can protect your car from overload.
• 🧰Space-saving: Scissor car jacks are collapsible, they have a compact design. The car lift jack can be easily placed under the car seat or stored in the trunk of your car. It can be used as a rugged replacement jack or as an extra utility jack.
• 🧰Perfect Car Partner: It's necessary to equip your car with a set of jack. If you are far away from auto repair shops or like long-distance travel, don't miss this electric car jack. Instead of tedious manual disassembly, any adult can easily change the tire without asking for help from others or going to the car repair shop. Car jacks are indispensable helper for garages, farms, highways, and long trips.

User questions & answers

Question:	Can I use it in the field
Answer:	The power cord can be replaced, but only if the conditions are requirements.
Question:	What is the collapsed height of this jack
Answer:	I assume so, it works on my F150
Question:	Will this work for a 2014 Nissan Frontier
Answer:	Awesome product. With the help of this jack and impact wrench, I can easily change a tire without any help.
Question:	How high can it lift
Answer:	It does work on any vehicles but you have to be patience since its slow pushing the car up depending on the weight.

Product features

Trihelper Electric Scissor Car Jack - 2 Ton

An electric car jack is a necessary auto repair tool, especially when you are far away from vehicle repair shops or like long-distance travel. This car jack is suitable for sedans under 2 tons, just press a button, a car will be lifted, instead of tedious manual disassembly, whether men or women can easily change the tire with ease in an emergent case.

Quick and Easy

The electric jack takes about one minute to reach a max. height (13.77in) with max. load capacity as high as 2 ton, lifting range 4.72-13.77in, fit for most sedans.

It is designed to save your effort and time, any adult can easily change the tire without asking for help from others or going to the car repair shop.

Stable Structure

The electric scissor jack has a triangular structure, which is steady and has the characteristics of stable and firm pressure resistance.

Antiskid Head

The protruding particles on the top of the jack head can increase the friction. The place where the car and the jack come into contact is less easy to slide and more stable.

Strong Power

The jack is made of high-quality cold-rolled steel, which is durable and has good bearing capacity. The jack has a super power motor, sedans under 2 ton can be easily lifted.

Solid Base

The electric car jack is designed with an extra-wide base, the wider contact surface makes the jack more stable, and provides higher security.

Easy Operation Buttons

Instead of tedious manual disassembly, just press the buttons, you can easily lift a car.

LED lights:

Built-in LED lights on the controller are bright enough to change tires in the dark.

Packing List

• Electric car jack x1
• Cigarette lighter power line x1
• Hand crank x1
• Spare fuse x3
• Instruction x1

Specification:

• Input Voltage: 12V DC
• Max Loading: 2T (4409 lb)
• Power Cord Length: 11.5 feet
• Lifting Height Range: 4.72-13.77 inches

Product description

The center-lift design of the Extreme Max Wide Motorcycle Scissor Jack is perfect for most motorcycle maintenance needs. Without the optional dolly, the jack lifts to an extended reach of 14” while the 15-1/8” x 9” platform holds your bike with a rubber padding that prevents scratching and adds stability. The jack is operated manually by using a 7/8” socket or wrench (sold separately). Measurements: Extended height: 14”; Collapsed height: 3-3/8”; Base: 15-1/8” x 9”; Lifting platform: 15-1/8” x 9”. *Do not use an impact-style wrench to raise or lower the jack.

• Extends up to a 14" height
• Easily hand-operated using 7/8" socket or wrench (sold separately) - *Do not use an impact wrench or powered drill to operate the lift
• Durable rubber padding on platform
• Heavy-duty steel frame
• 1100 lb. weight capacity; will not lift trikes

User questions & answers

Question:	what is the jack height when lowered
Answer:	I mean if the floor is level, then I’d say it’s very stable. Can’t attest to only 25 pounds. I’m on average only lifting 800-1000 lb bikes.
Question:	will this work for my harley trike
Answer:	I have an 83 FLHT on mine and we used a couple of thin pieces of wood under the bike. If you could put a couple of pieces underneath to take up the space. I wouldn't rest my engine on the lift.
Question:	With the dolly, amazon indicated apr 24-may 17 delivery timeframe. does that sound right? that's over a month out. thx
Answer:	I used it on Harleys only. But when I do. I use a flat aluminum disposable baking pan. I also have a large lift that I put my bike on.
Question:	Has anyone attempted using this lift with a late model Indian
Answer:	I don't have an exact answer, you'd probably be better off just getting a dirt bike stand though. I don't think the goes much past a foot. Works great for my Vl800 cruiser. But it's only got 6 in or so of clearance

Product features

Extreme Max Wide Motorcycle Scissor Jack

When it's time to get your motorcycle's wheels off the ground for maintenance or cleaning, look no further than the Extreme Max Wide Motorcycle Scissor Jack! Specifically designed to be one of the strongest and most stable scissor jacks available, the high strength worm drive and heavy-duty steel construction pair together to lift nearly any road bike, touring bike, or cruiser up to 1,100 lbs.

The lift is operated manually by using a wrench on the 7/8" worm drive. Do not use an impact wrench or powered drill to operate the lift.

Strength

When lifting your motorcycle, you want something strong, something you can rely on time and time again. That's why our engineers put in the effort to create a scissor jack with unparalleled strength and ease-of-use. Heavy-duty steel is the main component in the construction of the jack, preventing bending, breaking, and warping – keeping it consistent from it's first use through it's 100,000th use.

Stability

Stability shouldn't be a question when you're lifting anything, especially something as precious as your motorcycle. Designed with this in mind, the wide platform covers a large area, easily spanning gaps between frame rails or contacting more surface area on belly pans. The more flat surface you contact, the more stable the motorcycle. Textured rubber padding prevents any metal on metal contact, protecting your ride from scratching, scuffing and scraping.

Slim Fit

What good would a jack be if it couldn't fit under your ride? Many low riders and cruisers offer extremely low ground clearance, making it impossible to use a center-lift jack. However, with a fully-collapsed height of just 3-3/8", this should never be a problem! Park your motorcycle, slide your jack into position underneath, then lift away!

Reach

Starting at the fully-collapsed height of 3-3/8", the Extreme Max Wide Motorcycle Jack offers a tremendous 10-5/8" vertical travel, topping out at a fully-extended height of 14". This height provides plenty of clearance for tire changes, drive chain maintenance, cleanings, tune-ups, and more. While extended, the worm drive acts as a brake, holding the jack at the height you set without needing any clumsy locking bars or brake levers.

Also available from Extreme Max:

Extreme Max 5001.5059 Motorcycle Scissor Jack with Dolly

Also available from Extreme Max, the Motorcycle Scissor Jack with Dolly features the exact same jack, but adds the addition of a dolly tray to increase its versatility. Sliding your jack into place underneath your bike has never been easier.

• ⚠Note: Never use it on a sloped ground, be sure to use it on a flat road and place in the direction parallel to the car.🧰It takes about one minute for the jack to reach a max. height (16.53in) with max. load capacity as high as 3 ton, lifting range 4.72-16.53in. This electric car jack set is designed for most cars to save your effort and time, perfect to deal with a flat tire without striking a blow, and an essential repair tool when run into roadside emergencies.
• 🧰Best Choice for Sedan & SUV: Use high standard cold-rolled steel which has strong bearing capacity and is not easy to be deformed. Designed with an extra-wide base which adds stability and strength, reinforced solid screw rod makes the electric car jack will not easily be torn apart or twisted. Built-in LED lights on the button are bright enough to change tires in the dark. Two jack heads fit for both Sedan and SUV, cars under 3 ton can be easily lifted.
• 🧰Safety Guarantee: When the car jack reaches the maximum height, it will stop working automatically. The protruding particles on the top of the rubber jack head can increase the friction, and protect your car’s paint. The self-locking structure of the jack can prevent the car from falling suddenly and ensure the safety of the car and people. The internal circuit breaker of the jack can protect your car from overload.
• 🧰Professional Multi-function Toolbox: Each part has its own hole position, they will be precisely embedded in the box even in severe turbulence. Velcro stickers on the outside of the box prevent the toolbox from sliding in the car. The compact case design is very space-saving and can be placed under the car seat, the toolbox is easy to carry. The red triangle outside the box can be used as a warning sign, you don't have to look around for a warning sign when changing tires.
• 🧰Perfect Car Partner: It's necessary to equip your car with a set of jack. If you are far away from auto repair shops or like long-distance travel, don't miss this electric car jack kit. Instead of tedious manual disassembly, any adult can easily change the tire without asking for help from others or going to the car repair shop. Car jacks are indispensable helper for garages, farms, highways, and long trips.

User questions & answers

Question:	When I put the hand crank into the hand crank hole, it does not raise or lower the jack. No instructions for this. How do you use the hand crank
Answer:	sorry I havn't used it yet
Question:	Can you tell me about the height of the jack when it closed
Answer:	About 4.72 inches, it's compact and easy to place.
Question:	Will this car jack work on my 2018 sonata
Answer:	I think so, it's a universal scissor jack.
Question:	How do you contact the manufacturer? I need to know how to use the hand crank
Answer:	No happy

Product features

Trihelper Electric Scissor Car Jack - 3 Ton

An electric car jack is a necessary auto repair tool, especially when you are far away from vehicle repair shops or like long-distance travel. This car jack is suitable for sedans and SUVs under 3 tons, just flick a button, a car will be lifted, instead of tedious manual disassembly, whether men or women can easily change the tire with ease in an emergent case.

Quick and Easy

The electric jack takes about one minute to reach a max. height (16.53in) with max. load capacity as high as 3 ton, lifting range 4.72-16.53in, fit for most cars.

It is designed to save your effort and time, any adult can easily change the tire without asking for help from others or going to the car repair shop.

Stable Structure

The scissor jack has a stable structure, reinforced solid screw rod makes the electric car jack will not easily be torn apart or twisted.

Antiskid Rubber Head

The protruding particles on the top of the rubber jack head can increase the friction, and protect your car's paint. Each jack kit is equipped with two heads, fit for both Sedan and SUV.

Strong Power

The jack is made of high-quality cold-rolled steel, which is durable and has good bearing capacity. The jack has a super power motor, cars under 3 ton can be easily lifted.

Solid Base

The electric car jack is designed with an extra-wide base, the wider contact surface makes the jack more stable, and provides higher security.

Safety Protection

When the car jack reaches the maximum height, it will stop working automatically. The self-locking structure of the jack can prevent the car from falling suddenly and ensure the safety of the car and people. The internal circuit breaker of the jack can protect your car from overload.

Packing List:

• Electric Car Jack x1
• Cigarette Lighter Power Line x1
• Hand Crank x1
• Spare Fuse x3
• Battery Clip x1
• Glove x2
• Instruction x1

Specification:

• Input Voltage: 12V DC
• Max Loading: 3T (6614 lb)
• Power Cord Length: 11.5 feet
• Lifting Height Range: 4.72-16.53 inches

Product description

💖Trihelper Electric Car Jack Set with Impact Wrench - 3 Ton

Electric car jack is a necessary auto repair tool, especially when you are far away from vehicle repair shops or like long-distance travel. This car jack kit is designed to save your effort and time, suitable for sedans, SUV under 3 ton, just flick a button, a car will be lifted, instead of tedious manual disassembly, whether men or women can easily change the tire with ease in any emergent case.



💖Specification

Input Voltage: 12V DC

Max Loading: 3T (6614 lb)

Lifting Height Range: 4.72-16.53 inches

Power Cord Length: 11.5 feet



💖Packing List

Electric car jack x1

Impact wrench set x1

Cigarette lighter power line x1

Safety Hammer x1

Hand crank x1

Spare fuse x3

Battery clip x1

Bolt driver x1

Glove x2

Instruction x1



💖Attention:

1. Never use electric car jack on sloped ground, be sure to use it on flat ground.

2. Do not exceed the limit of load bearing capacity, the car jack is only applicable to vehicles within 3 ton, vehicles beyond 3 ton is not supported.

3. To ensure sufficient electricity, it is better to start the vehicle before using the electric jack.

4. When the electric car jack is working, please do not get too close to the car and touch it with your fingers to avoid personal injury.

5. Please pay attention to the positive and negative terminals of the battery, do not reverse the position of the battery clips when connected to the car battery (DC 12V).

• ⚠For the impact wrench, 2 sleeves are available, be sure to choose the suitable one, keep pressing "II" to loosen the screw and "I" to tighten it. ⚠For the jack, be sure to use it on a flat road and place it in the direction parallel to the car.🧰It takes about one minute for the jack to reach a max height (16.53in) with max load capacity of 3 ton. This electric car jack and wrench set is designed for most cars to save your effort and time, perfect for dealing with a flat tire.
• 🧰Best Choice for Sedan & SUV: Use high standard cold-rolled steel which has strong bearing capacity and is not easy to be deformed. Designed with an extra-wide base which adds stability and strength, reinforced solid screw rod makes the electric car jack will not easily be torn apart or twisted. Built-in LED lights on the button are bright enough to change tires in the dark. Two jack heads fit for both Sedan and SUV, cars under 3 ton can be easily lifted.
• 🧰Safety Guarantee: When the car jack reaches the maximum height, it will stop working automatically. The protruding particles on the top of the rubber jack head can increase the friction, and protect your car’s paint. The self-locking structure of the jack can prevent the car from falling suddenly and ensure the safety of the car and people. The internal circuit breaker of the jack can protect your car from overload.
• 🧰Professional Multi-function Toolbox: Each part has its own hole position, they will be precisely embedded in the box even in severe turbulence. Velcro stickers on the outside of the box prevent the toolbox from sliding in the car. The compact case design is very space-saving and can be placed under the car seat, the toolbox is easy to carry. The red triangle outside the box can be used as a warning sign, you don't have to look around for a warning sign when changing tires.
• 🧰Perfect Car Partner: It's necessary to equip your car with a set of jack. If you are far away from auto repair shops or like long-distance travel, don't miss this electric car jack kit. Instead of tedious manual disassembly, any adult can easily change the tire without asking for help from others or going to the car repair shop. Car jacks are indispensable helper for garages, farms, highways, and long trips.

User questions & answers

Question:	Does this jack work for a 2010 4Runner
Answer:	Yes
Question:	How about this electric car jack set
Answer:	Not sure what you mean by a drop leg. If it's a part for the actual unit, try your local RV dealer first then the manufacturer.
Question:	Can this work for a 2015 honda crv
Answer:	Very slow; if you're looking for speed, a hand crank jack would be a better bet. However, personally, I would never go back to a hand crank jack after having this one. I use this on a 27' trailer, which is extremely heavy. I got tired of hand cranking the jack... This makes it almost enjoyable to hook the trailer up.
Question:	What is the maximum lifting height of this jack
Answer:	It comes with instructions. There is not installation hardware other than 3 washers used for grounding. If you are replacing an existing jack, you can reuse the bolts unless they are rusted, then I would suggest new ones. You will need electrical connectors to splice the power wire to the fuse wire, and you will need another connector to attach to your battery or power supply.

Product features

Trihelper Electric Scissor Car Jack with Impact Wrench - 3 Ton

An electric car jack is a necessary auto repair tool, especially when you are far away from vehicle repair shops or like long-distance travel. This car jack is suitable for sedans and SUVs under 3 tons, just flick a button, a car will be lifted, instead of tedious manual disassembly, whether men or women can easily change the tire with ease in an emergent case.

Quick and Easy

The electric jack takes about one minute to reach a max. height (16.53in) with max. load capacity as high as 3 ton, lifting range 4.72-16.53in, fit for most cars.

The electric impact wrench can quickly and safely remove a screw within 5 seconds.

This car jack set is designed to save your effort and time, any adult can easily change the tire without asking for help from others or going to the car repair shop.

Stable Structure

The scissor jack has a stable structure, reinforced solid screw rod makes the electric car jack will not easily be torn apart or twisted.

Antiskid Rubber Head

The protruding particles on the top of the rubber jack head can increase the friction, and protect your car's paint. Each jack kit is equipped with two heads, fit for both Sedan and SUV.

Strong Power

The jack is made of high-quality cold-rolled steel, which is durable and has good bearing capacity. The jack has a super power motor, cars under 3 ton can be easily lifted.

Solid Base

The electric car jack is designed with an extra-wide base, the wider contact surface makes the jack more stable, and provides higher security.

Safety Protection

When the car jack reaches the maximum height, it will stop working automatically. The self-locking structure of the jack can prevent the car from falling suddenly and ensure the safety of the car and people. The internal circuit breaker of the jack can protect your car from overload.

Packing List:

• Electric car jack x1
• Impact wrench set x1
• Cigarette lighter power line x1
• Safety Hammer x1
• Hand crank x1, Spare fuse x3
• Battery clip x1, Bolt driver x1
• Glove x2, Instruction x1

Specification:

• Input Voltage: 12V DC
• Max Loading: 3T (6614 lb)
• Power Cord Length: 11.5 feet
• Lifting Height Range: 4.72-16.53 inches

• HIGH QUALITY RATCHET TIE DOWN STRAPS – Travel with peace of mind if you've got the top rated industrial grade AUGO tie down straps!
• RUBBER COATED "S" HOOKS - Prevent your cargo and vehicle from being scratched!
• ERGONOMIC HANDLES ARE MOLDED ON – AUGO has unique molding technology. Our handles will never fall off!
• ADJUST TO THE SIZE OF YOUR CARGO – 15 ft. of webbing will securely hold big or small loads!
• TWO AUGO BUNGEE CORDS – Comes in handy. Added for your convenience!

User questions & answers

Question:	would this work with a wheelchair van to stabilize the chair when traveling
Answer:	The strap portion is fairly long. You could probably trim that down, but it still will require a bit of ratcheting to get it tight. That is, if you have to thread it through a portion of the chair, then thread it into the ratchet mechanism, then crank it a bit to get it right ...
Question:	Would these be appropriate for securing a 24 ft extension ladder to the roof rack of an SUV
Answer:	Yes. Think they hold 500lbs. Just make sure you tie ladder to front bumper
Question:	Does anyone know if these would work to tie down a Yeti cooler to a truck bed
Answer:	Yes, that should be possible if your truck bed has anchors to hook onto on the floor of your truck bed. Here is an easy way to use them: https://youtu.be/85wTo28oNSQ
Question:	how wide are the straps 1 inch 1.5 inches or 2 inches
Answer:	1 inch

Product features

Keep your equipment safe, secure and in pristine condition with AUGO's Ratchet Tie Downs!

Product description

Product Dimensions:17.6 " x 10.6" x 4.5" Minimum Height: 3.25" Maximum Height: 13.25" Weight Capacity: 1100 lbs. Platform Dimensions: 16" x 10"

• Solid steel construction in a blue and black powder coated finish
• Simple crank operation
• Designed to fit most motorcycle models
• For use in the garage, shop, or at the track
• 10.6 Inch Wide Deck

User questions & answers

Question:	Does this roll
Answer:	I would suggest using this in the fx loop of your amp
Question:	Will this lift front end of a harley tri glide?Also will it block getting to oil drain hole
Answer:	Yes, you can have any combination of the effects running at the same time: 1, 2, or all 3.
Question:	How many threads per inch on the shaft
Answer:	No. You dial on the echo repeat rate with the little knob.
Question:	How many turns of the crank are required to raise the jack to full height
Answer:	Yes. You can use any guitar pedal with bass but the frequencie spectrum isn't meant for it.

• ⚠For the impact wrench, 2 sleeves are available, be sure to choose the suitable one, keep pressing "II" to loosen the screw and "I" to tighten it. ⚠For the jack, be sure to use it on a flat road and place it in the direction parallel to the car.🧰This electric jack &wrench and pump set is designed for most cars to save your effort and time, perfect to deal with a flat tire when run into road emergencies.
• 🧰Best Choice for Sedan & SUV: Use high standard cold-rolled steel which has strong bearing capacity and is not easy to be deformed. Designed with an extra-wide base which adds stability and strength, reinforced solid screw rod makes the electric car jack will not easily be torn apart or twisted. Built-in LED lights on the button are bright enough to change tires in the dark. Two jack heads fit for both Sedan and SUV, cars under 3 ton can be easily lifted.
• 🧰Safety Guarantee: When the car jack reaches the maximum height, it will stop working automatically. The protruding particles on the top of the rubber jack head can increase the friction, and protect your car’s paint. The self-locking structure of the jack can prevent the car from falling suddenly and ensure the safety of the car and people. The internal circuit breaker of the jack can protect your car from overload.
• 🧰Professional Multi-function Toolbox: Each part has its own hole position, they will be precisely embedded in the box even in severe turbulence. Velcro stickers on the outside of the box prevent the toolbox from sliding in the car. The compact case design is very space-saving and can be placed under the car seat, the toolbox is easy to carry. The red triangle outside the box can be used as a warning sign, you don't have to look around for a warning sign when changing tires.
• 🧰Perfect Car Partner: It's necessary to equip your car with a set of jack. If you are far away from auto repair shops or like long-distance travel, don't miss this electric car jack kit. Instead of tedious manual disassembly, any adult can easily change the tire without asking for help from others or going to the car repair shop. Car jacks are indispensable helper for garages, farms, highways, and long trips.

User questions & answers

Question:	How high can this car jack lift at most
Answer:	It said 16.53 inches, I think it fit for most vehicles.
Question:	How about the quality of this car jack set
Answer:	It is durable and safe! The jack, impact wrench and air pump are all work well and help a lot.
Question:	Will the scissor jack work for a piruis toyata
Answer:	Absolutely I think, cars under 3 ton can be lifted without any problem.
Question:	I have a car with a low ground clearance less than 5 inches, will this jack fit for it
Answer:	The lowest height of the jack is 4.72 inches, you can check your car to ensure if the jack fits it.

Product features

An electric car jack is a necessary auto repair tool, especially when you are far away from vehicle repair shops or like long-distance travel. This car jack is suitable for sedans and SUVs under 3 tons, just flick a button, a car will be lifted, instead of tedious manual disassembly, whether men or women can easily change the tire with ease in an emergent case.

Quick and Easy

The electric jack takes about one minute to reach a max. height (16.53in) with max. load capacity as high as 3 ton, lifting range 4.72-16.53in, fit for most cars.

The electric impact wrench can quickly and safely remove a screw within 5 seconds.

The tire pump can quickly inflate the tire, dynamic pressure change can be seen directly through the display screen during inflation.

It is designed to save your effort and time, any adult can easily change the tire without asking for help from others or going to the car repair shop.

Stable Structure

The scissor jack has a stable structure, reinforced solid screw rod makes the electric car jack will not easily be torn apart or twisted.

Antiskid Rubber Head

The protruding particles on the top of the rubber jack head can increase the friction, and protect your car's paint. Each jack kit is equipped with two heads, fit for both Sedan and SUV.

Strong Power

The jack is made of high-quality cold-rolled steel, which is durable and has good bearing capacity. The jack has a super power motor, cars under 3 ton can be easily lifted.

Solid Base

The electric car jack is designed with an extra-wide base, the wider contact surface makes the jack more stable, and provides higher security.

Safety Protection

When the car jack reaches the maximum height, it will stop working automatically. The self-locking structure of the jack can prevent the car from falling suddenly and ensure the safety of the car and people. The internal circuit breaker of the jack can protect your car from overload.

Packing List:

• Electric car jack x1
• Impact wrench set x1
• Cigarette lighter power line x1
• Safety Hammer x1, Air pump set x1
• Hand crank x1, Spare fuse x3
• Battery clip x1, Bolt driver x1
• Glove x2, Instruction x1

Specification:

• Input Voltage: 12V DC
• Max Loading: 3T (6614 lb)
• Power Cord Length: 11.5 feet
• Lifting Height Range: 4.72-16.53 inches

• REINFORCED LIFT CAPACITY：With a hefty lift capacity of 1200 lb and dynamic lift height range from 3 3/4" to 13 2/5", it can be used to lift street bikes, cruiser bikes, and adventure touring motorcycles. It will not fit snowmobiles, ATVs, UTVs, or dirt bikes.
• DURABLE CONSTRUCTION: Heavy-duty steel body and steel sleeve with easy-adjusting lift height. The durable red coating is highly resistant to oil, grease, and dirt.
• XL DECK: The extra-wide top platform of 9.8” x 15.8” provides a large contact area for better balance and support to your motorcycles, so you can find the bike’s center of gravity without the hassle.
• NON-SLIP DECK & GLOVES: The lift deck is padded with premium rubber for extra durability and stability. Protective gloves are included for your safety. Manufactured and tested to meet all current safety standards.
• NOTE: Avoid using an impact wrench - improper use may cause damage to the nut. Lift your motorcycle easily by rotating the metal sleeve, please refer to the instructions.

User questions & answers

Question:	Can it be used for scooters , mopeds
Answer:	When the battery expires (after 7 years), you can send it in to ACR to have it replaced for $150. Or if you like taking risks with your life, you can replace it yourself for $5(it runs on 3 CR123A cells, welded and heat shrinked into a single battery pack).
Question:	Has anyone with a Milwaukee 8 used this successfully
Answer:	It works wold wide in any location as it communicates with the satellite. However once it's activated it will be transmitting signal for 24 hours. If you are in a distant location that search and rescue needs more than 24 hours to find you then we recommend getting any of our EPIRBs, GlobalFix V4, Pro, or iPro. They last from 48 to 65 hours.
Question:	Will it work with a ninja 650? And where am I supposed to position it
Answer:	The unit will keep blinking while the signal is been transmitted. There is no return confirmation only sending out. However, you are able to test the unit before going out on a trip by performing a self-test.
Question:	Honda vtx 1300 r weighs 726 lbs. big crusier motorcycle. nobody has used it like this heavy and type of motorcycle. just need to know will it work
Answer:	I'd say fairly difficult. That yellow flap on the front protects the activation mechanism and the spring is fairly robust.

Product features

Orion Motor Tech Motorcycle Scissor Jack Stand

• NICE APPEARANCE & HIGH QUALITY - Heavy duty and solid steel construction in a red and black powder coated finish. The paint is for easy cleanup, oil-resistant, grease-resiatant and dust-resistant
• ANTI-SLIP DESIGN - Top surface is designed a durable rubber pad with striped veins, which is benificial to prevent slippage and scratching
• MULTIPURPOSE - The jack fits most motorcycle models including cruisers, trikes, Can Am Spyders, ATVs, UTVs, dirt bikes, snowmobiles, etc
• EASY TO OPERATE - Attached with a free crank for easy operation. Just rotating the metal sleeve to lift a motorcycle easily, a really excellent helper for motocycle repair
• DURABLE & HEAVY DUTY - Maximum lift height: 14.5 Inch. Total weight capacity: 1100 lbs. For use in the garage, shop, or at the track

User questions & answers

Question:	What is the size of the bolt that lifts the table? Are the threads Acme or sae
Answer:	There is only about 1/8” space between roller and platform.
Question:	My Harley is lowered and I need a stand with no more than 3.5” to slide under it. Is this exactly 3.5” height when completely folded down? thank you
Answer:	As long as the air consumption is correct.
Question:	what is max hight
Answer:	It definitely does not require 15scfm. My compressor is rated at 5.8@90psi and will keep up with this gun all day long
Question:	Considering bolting plywood to the platform. Concerned about bolt head interfering with mechanism. Any space between roller and underside of platform
Answer:	It uses 15cfm of air. But man if you have a shop Compressor and get the gun set right It paints nearly as well as my devilbiss gti pro which uses 16cfm of air also. I would love to get the 1.8 version one for primer. Give it 25 to 29 psi I stay around 2 bar. If you wanna lower air consumption use smallest fan as possible to get the desired finish and project time. A great gun for a smaller compressor is the mp400 Cartman sells I'm about to buy another. It's a really great gun as well. Most of the parts will interchange with the 400 series and its marked right at 4 to 7 cfm. I can use it with a 1.8hp 26 gallon kobalt air compressor. With minimal recover time. Has a nice fan and droplet size. But if you have a shop compressor that can put out 12 15cfm at least get both but this one can lay a flat mirror shine. I've done two jobs and ask people at work which gun did what. This gun will spray just like a gti pro. I bought this gun when Cartman first came on amazon. It was like 25 back then and I'm not surprised in the least it's 41 now. I'm getting another for back up. For any professional spray painters, serious DIY guy with a shop compressor. If you have a home portable compressor you will be taking lots of breaks if you paint large projects. I'm using it on 2 stage 80 gallon 175psi 27.5cfm at 175 pai compressor. It runs the mechanic shop, welding shop and my paint booth. And 99 percent of the time I'm the only one using it. And it runs it hard it'll keep 2 bar mostly until shop uses a impact or something. It'll be like 80 to 100 pai when I release the trigger. Regulator at the wall drops to 45psi under full air. So Ya hope that helps people it's a air monster but a beast of a gun. Any serious apprentice or DIY needs this gun and the mp400. Must haves. The mp400 is great for home 1.5-2.5 compressors. Small fan and wind fluid in some it'll take longer but use less air and get proper atomization

Product features

VIVOHOME Wide Deck Scissor Lift Jack 1100LB

VIVOHOME motorcycle center scissor lift jack with safety pin and wing design on each side, exhibits great stability and safety prevention, suit for cruisers, trikes, Can Am Spyders, ATVs, UTVs, etc. Release your hand to do more important jobs, perfectly the best partner in your repair work.

Enjoy The Fresh Ice with Cool Feeling

Product Specification:

• Product Dimensions:14.57 " x 9" x 4.5"
• Minimum Height: 3.25"
• Maximum Height: 13.25"
• Weight Capacity: 1100 lbs.
• Platform Dimensions: 16" x 10"

Package Included:

• 1 x Scissor Mini Lift
• 1 x Handle
• 2 x Adjustable Plate

Removeable Crank Handle

Wide Deck Base

Durable Center Shaft

• ✅SECURE ELEVATION: A must-have for sport or dirt bike enthusiasts. The large rubber top surface lifts the wheels off of the ground to allow for better access for maintenance and repairs, as well as improved storage.
• ✅SAFETY FOOT STEP LEVER: The large foot step lever design helps avoid pinched fingers and strained shoulders from lifting your bike. The hydraulic pump mechanism allows you to lift your bike with ease.
• ✅SOLID CONSTRUCTION: The solid high-grade steel frame creates a strong, stable platform for your motorbike during maintenance or storage. A gap in the platform provides access to your oil pan for home maintenance and oil changes.
• ✅PORTABLE CONVENIENCE: The compact size and manageable weight allow for this lift to be transported and moved whenever needed. Easily move this lift on the 4 sturdy rubber wheels, of which 2 are lockable for added stability.
• ✅NON-SLIP DESIGN: Non-skid rubber padding on the top surface will keep your bike from slipping during maintenance and storage. Safely holds up to 300 pounds.

User questions & answers

Question:	If you changed out the hydraulic jack would the Aussie lift rise any higher
Answer:	The devices which we are currently selling are October 2017.
Question:	What is the highest distance for that lift
Answer:	Unfortunately only US units are allowed to be sold in the US. Thank you
Question:	Can i use this to put the bike in my pickup truck if the truck bed height is lower than 36 inches
Answer:	The price is usually around 1/3 of the full price, but it will depend on the conditions of your beacon once it's sent to the battery replacement center. If you are in an emergency you can just notify the manufacturer and they should replace it for free.
Question:	Anyone have thoughts about using this as a transmission jack
Answer:	Unfortunately no. Every unit sold in the US is built with a US code.

Product features

Durhand 36” Foot Step Hydraulic Pump Lift for Small Motorcycles and Dirt Bikes

Bike maintenance and repair is a daily ritual for most riders, and knowing that your lift can keep up with your consistent schedule is important. Durhand’s adjustable lift features a non-slip rubber top, hydraulic foot step lever, and a portable 4- wheel design that will keep you riding. This portable lift is a convenient size, and the 4 easy to maneuver wheels help you take it from the garage to the track, the shop, or the trail. A sturdy steel frame, powder coated for rust and corrosion resistance, gives this lift strength, durability, and longevity. With a large surface area, topped with non-skid rubber padding, your bike will sit fully elevated with no slipping. We know you love your bike, so let us help take some of the stress out of your maintenance routine when you use our adjustable lift from Durhand.

Secure Elevation

A must-have for sport or dirt bike enthusiasts! The large rubber top surface lifts the wheels off of the ground to allow for better access for maintenance and repairs, as well as improved storage.

Safe and Sturdy

The large footstep lever design helps avoid pinched fingers and strained shoulders from lifting your bike. The hydraulic pump mechanism allows you to lift your bike with ease. Non-skid rubber padding on the top surface will keep your bike from slipping during maintenance and storage.

Solid Construction

The solid high-grade steel frame creates a strong, stable platform for your motorbike during maintenance or storage. A gap in the platform provides access to your oil pan for home maintenance and oil changes.

Portable Convenience

The compact size and manageable weight allow for this lift to be transported and moved whenever needed. Easily move this lift on the 4 sturdy rubber wheels, of which 2 are lockable for added stability.

Features

• Large top surface lifts your bike off of the ground for better access for maintenance and repair
• 4 wheels make this lift easily portable from the garage to the track, shop, or trail
• Constructed from durable steel
• Hold up to 300 lbs
• Large hydraulic foot step lever design promote safety
• Non-skid rubber padding on the top surface will keep your bike from slipping off

Specifications

• Material: Steel, Rubber
• Color: Blue
• Overall Size: 17.75" L x 15.75" W x 36.5" H
• Top Size: 16.5" L x 13.75" W
• Adjustable Height: 13.75" - 35.5"
• Net Weight: 60 lbs.
• Weight Capacity: 300 lbs.
• Accessories Included: 2 U-type hooks, foot step pedal lever, rubber foot pad, 2 hooks, long rod

Product description

Pit Posse just made working on your bike extremely comfortable. No more sitting in uncomfortable positions to get work done, we present the ultimate bike stand.

✔️ Hydraulic Scissor Lift lifts your bike to a comfortable work height

✔️ Foot pedal incorporated to lift stand effortlessly 

✔️ Adjustable height, from 13” thru 36” inches off the ground

✔️ Top platform at 13 3/4 x 16"

✔️ Safety loops to stabilize the bike and safety pin for extra insurance

✔️ Heavy-duty steel frame construction

✔️ Large oil drain hole

✔️ Oil & gas resistant rubber top

✔️ 300 lbs. weight capacity

✔️ 2 Year Warranty

Professional shop hydraulic floor jack stand that is designed to maximize your workspace. Read our reviews and see why bike enthusiasts are raving about this stand!

ADD TO CART NOW RISK-FREE WITH OUR 2 YEAR WARRANTY!

• ✅ A PROFESSIONAL LIFT FOR YOUR HOME/GARAGE/SHOP- This hydraulic scissor lifter is designed to allow you to repair your motorcycle, ATV, and dirtbike smoothly. Perfectly centers your bike with both wheels in the air, and you can adjust the height anywhere between 13 inches thru 36 inch off the ground. The top platform is flat and is 13.75 x 16 inch. This lift's capacity is up to 300 pounds.
• ✅ SAFELY WORK ON YOU BIKE WORRY FREE- This jack stand is heavy duty, made with thick gauge metal and keeps your bike safe. Includes safety loops that will help secure the bike and the heavy-duty steel frame construction and rubber pad make this lifter movement resistant and prevents metal to metal contact that can scratch, scuff and scrape your motorcycle.
• ✅ EASY TO OPERATE CLEAN WORK ENVIRONMENT- The lift has foot pedals with a hydraulic lift to make it quick and easy to lift or lower the stand, there is a large oil drain hole in the middle of the platform, and the top is made of rubber that is oil & gas resistant.
• ✅ DESIGNED FOR COMFORTABLE USE AND STORAGE- The scissor jack stand is sufficient to hold the bike's tires off the ground to store in the winter. The lift table eliminates the need to stoop or kneel while working on your motorcycle, giving you a comfortable work environment. The wide top platform makes the stand safer and distributes the weight on a broader area preventing accidental slips or movements.
• ✅ YOUR SATISFACTION IS OUR #1 PRIORITY- Pit Posse's stand is one of the best in the market. If you read the reviews, you know our lift is well known and used in many shops daily to ease the process of working on your bike. If you are not 100% satisfied, we will give you a full refund or a free exchange, no questions asked. We have a 2-year warranty! Send us a message, and we will gladly assist.

User questions & answers

Question:	Can you put the replacement wheels on this stand
Answer:	you can see the second photo, The floor support wide is 42.5", longth is 30.8".
Question:	Do you have a use manual for this
Answer:	The lowest height is 5.38ft(1640mm). you can see the forth photo
Question:	How quickly and quietly can it go from lowest height to maximum height? (For a magic trick). Assume I can hide the movement of the foot on the pedal
Answer:	We have 4 height(7.05FT,6.49FT,5.94FT,5.38FT). you can use this height 6.49FT. Also it depends on how tall you are.
Question:	What's the actual weight of this
Answer:	I cannot say whether that is with every unit but ours did smell. (I mentioned that in my review) We put it outside for a week and it is perfectly fine now. After a week of patience I must say that I am surprised how sturdy it is. I am 68kg, roughly 150lbs and it barely flexes when I am on it. So I guess it was worth the additional wait. And who knows, other units might not have the smell.

• COMPACT AND FUNCTIONAL - This compact hydraulic jack makes it safe and easy to service your motorcycle or ATV through a simple lifting mechanism which is able to hoist up to 1500 lbs
• HIGH-QUALITY MATERIALS - Made with a durable steel frame and high-quality, non-slip rubber lift pads, this jack is able to lift your machine without damaging itself
• SAFETY FIRST - Comes with a 3-position safety lock mechanism, fix your vehicle without worry
• EASY TRANSPORT - Built with a handle and swivel casters, the jack is easy to transport and simple to stow
• MANUALLY OPERATED - The jack can be operated manually by foot pedal ; Comes with two tie-down straps, two adapter bars, and a detachable handle

User questions & answers

Question:	Will this work for a vucan
Answer:	Hi Kermit, sorry it's been a while since I logged on to Amazon. I'll start by saying that I used a 62 doing surveys as a contractor with DHS. It was a fine unit and did its job. In my work I never had to push any of its features to their limit so for us, it was very adequate. Having said that, when it came time for me to purchase a GPS for myself, I wanted the newer model, so therefore I went with the model 64. Keep in mind, both are base models for their respective series, so they do not have the fancier features of the s and st. As far as comparison, the 64, being newer has a bit more, but not that you'll necessarily notice. It depends on your use 64 62Built in Memory: 4GB vs. 1.7GBWaypoints: 5000 vs. 2000Data cards: Accepts microSD vs. Does not acceptGeocaching: 250,000 preloaded vs. paperlessHigh SensitivityReceiver: GLONASS AND GPS vs. NoneThere are complete lists on the internet as to which does what. I believe they are both pretty good units but the 64, being newer, is updated with a few more features and a bit more memory. the only drawback I can think of is that it lists the battery capacity at 16 hours vs 20 for the 62. In addition, I don't know if you can even get the 62 anymore. Once again, having used both, I see not major difference if you're just going to use it for some hiking, biking, getting your position, bearing, etc. Unless you're a scientist or you're going to load all kinds of data or save copious amounts of data or the like, I doubt you'll even notice the difference. I do believe the GLONASS does make a big difference in speedy acquisition of satellites, though. Sometimes it's acquired a fix even seconds after I turn it on. Is it a big deal? Not really, but hey, that might speak to the sensitivity of the unit in the field. So far, I'm happy with it. I hope this helps answer some of your questions.
Question:	What is the height of this jack in it's compressed possion
Answer:	Hi Eric! Thanks for the great question! The Spot X 2-Way Satellite GPS Messenger requires a subscription to use the device. A major advantage is that you can commit to a service plan that is a Month to Month commitment and only costs $14.95 Per Month. If you decide that your willing to sign up for the year, the rate drops to $11.95 per month. If you have any other questions, feel free to reach out!
Question:	Jack doesnt work with motorcycle
Answer:	Hi Brian! The Spot X GPS Satellite SOS Messenger requires that you have a service plan to utilize all of the unit's capabilities. Features such as the Waypoint you mentioned; will only work once you have set this up. The good news is that you do not have to commit to an annual service agreement. Instead, you can pay month to month without the long term commitment. So, for example, If you locked in a time to travel or hike and have advance notice, you can time the monthly service plan to suit your needs and turn off the subscription at your discretion. I hope that helps!
Question:	How log are the lift pads and what is the width of the lift cradle
Answer:	Yes, SPOT GEN4 provides 2-way satellite messaging when you’re off the grid or beyond reliable cellular coverage.

Product features

VIVOHOME 1500 LB Motorcycle Hoist Jack

VIVOHOME’S Motorcycle and ATV lift is made from high-quality steel designed to be easy-to-use, portable, and strong enough to handle small personal vehicles like dirt bikes, motorcycles, jet skis, snow mobiles, and ATVs. After the machine has been loaded onto the jack adjustable locking screws secure the wheels in place to provide stability and safety. Along with a three-position safety lock, this jack will secure any machine you might need to repair.

More About The Product:

Product Specification:

• Material: Steel
• Package Dimensions: 32.28”L*16.34”W*4.92H”
• Item Weight: 62lbs

Package Include:

• 1 x Lift Jack
• 1 x Handle
• 2 x Tie-Down Straps
• 2 x Adapter Bars
• 1 x Manual

Non-slip Rubber Pad

Prevent the projects slipping while lifting up

Swivel Casters

Easy To move, position And transport

Durable Footplate

Easy to operate, time saving and labor saving