13 best 4 ton floor jacks

Product description

Fast Lift to the Jacking Point

Blackhawk B6350 Service Jack is a 3-1/2 ton (7,000 lbs) capacity service jack that features the unique design of fast list technology to fast lift to the jacking point with no load.

It features the swivel saddle that provides you with the easy jack positioning and user safety. Its heavy duty steel construction also provides you the safe use and long term durability.

Blackhawk B6350 Service Jack also features the bypass device that preventing the damage from over pumping.

Blackhawk B6350 Service Jack also features the built-in internal safety valve and vent plug to ensures the safe operation.

- 3½Ton (7,000 Lbs.) Lift Capacity

- Fast Lifting Technology

- Heavy Duty Steel Construction & Swivel Saddle

- Built-In Safty Valve and Bypass Device

Blackhawk B6350 Service Jack is backed by the full one year warranty from the date of the purchase.

Click the buy button now to get your long lasting professional sevice jack

• Built-in internal safety valve and vent plug ensures safe operation
• Swivel saddle provides easy jack positioning and user safety.Saddle Diameter: 4 inch
• 3.5-ton/7,000 lb. lift capacity
• Jack Size: 28 1/2" L x 13 3/4" W x 6 1/2" H
• Rugged universal joint for precise load control
• Great for working in the garage and other outdoor activities such as picnics or ball games
• Note: The hydraulic jack is designed to lift, not to support the object. Immediately after lifting, loads must be supported by a pair of appropriately rated jack stands

User questions & answers

Question:	Hi, Wondering if it will fit my new XtremepowerUS 1/2 Ton Transmission Hydraulic Floor Jack Adapter it has a 1 1/4 inch hole
Answer:	I would say no. The hole in this jack only measures 1 1/8". It would seem your adapter needs an 1 1/4" hole for the "peg" to drop into .
Question:	How high does it lift
Answer:	The lifting range on the jack is 5.5" to 22" H.
Question:	Will this fit under a low profile car like a 350Z
Answer:	It's unlikely. I have a 2006 Mustang GT. If I'm not mistaken, a Mustang has about the same ground clearance as a 350Z. The jack will not fit under my Mustang. It's about an inch or two too tall. It is a great jack in spite of this. I use it on my other vehicle.
Question:	Anyone know of any jack that has this weight capacity, but is made in the USA
Answer:	My Blackhawk B6350 I bought 3 months ago has a made in the USA sticker. For whatever that means. Maybe to sticker was made here!

Product features

Lifting Range: 5.5 inches - 22 inches

• Note: Before it uses, it needs to make sure the release valve needs to be turned clockwise until the firm resistance is felt.
• Note: Since the hydraulic jack is designed to lift, not to support the object. Immediately after lifting, loads must be supported by a pair of appropriately rated jack stands

Product description

The Torin TCE AT84007U hydraulic garage floor jack can be used for general or heavy-duty industrial use and features a 4 ton (8, 000 lb) capacity. With a lift range between 4" to 20", you can gain easy access under low-profile vehicles. It's constructed of durable, high-strength steel and has a powder-coated finish for rust resistance. The dual piston pump lifts loads 5 times faster than a single pump and is ideal for most cars, trucks, and SUVs. Equipped with large steel casters and 360-degree swivel casters for smooth maneuverability. In terms of safety, this Torin service jack even comes with a built-in safety overload system which prevents use beyond load capacity. Wide stance provides added stability under load. Meets ASME safety standards and includes a 2 year limited manufacturer.

• Hydraulic garage floor jack can be used for general or heavy-duty industrial use and features a 4 ton (8, 000 lb) capacity
• Dual piston pump lifts loads 5 times faster than a single pump and is ideal for most cars, trucks, and SUVs
• Lifting range from 4" to 20" allows you can gain easy access under low-profile vehicles; Wide stance provides added stability under load
• Equipped with large steel casters and 360-degree swivel casters for smooth maneuverability
• Features a built-in safety overload system prevents use beyond load capacity; Meets ASME safety standards and includes a 2 year limited manufacturer

Product description

This heavy duty 4 ton car jack has a lift range from 4-1/4 in. to 20-1/4 in. to get most vehicles almost two feet off the ground. Dual piston Rapid Pump technology lifts most work loads in just 3-1/2 pumps.

• Lift height of 4-1/4 in. to 20-1/4 in., ideal for low-profile vehicles to trucks and SUVs
• Lift capacity of up to 4 ton
• Dual piston hydraulic system
• Ball bearing premium rear swivel casters for 360° mobility
• Rotating, removable jack saddle adapts quickly to lift accessories

User questions & answers

Question:	Is it made in the USA
Answer:	NO THIS IS FROM HARBOR FRIEGHT
Question:	Is it made in the USA
Answer:	NO THIS JACK IS A HARBOR FRIEGHT ITEM

Product description

The Torin BIG RED T83006 hydraulic trolley floor jack is constructed with heavy duty steel, providing long term durability with an industrial luster. This floor jack has a 3 ton (6,000 lb) capacity and features a minimum lifting height of 5-7/8" and a maximum height of 20-7/8", which is ideal for most cars, trucks, vans, and SUVs. The single piston quick lift pump allows you to easily raise the jack to the desired height. A safety bypass system prevents over-loading and ensures safe operation. Equipped with large steel casters and 360-degree swivel casters for smooth maneuverability. The extra long saddle neck saves time when lifting higher vehicles. A built-in carrying handle allows for the floor jack to be lifted and moved quickly. Includes a limited 1 year manufacturer warranty.

• Hydraulic trolley floor jack is constructed with heavy duty steel, providing long term durability with an industrial luster
• Features a 3 ton (6,000 lb) capacity with a minimum lifting height of 5-7/8" and a maximum height of 20-7/8"; Ideal for most cars, trucks, vans, and SUVs
• Equipped with large steel casters and 360-degree swivel casters for smooth maneuverability; Extra long saddle neck saves time when lifting higher vehicles.Handle Length:24.5 inch
• Single piston quick lift pump allows you to easily raise the jack to the desired height; Safety bypass system prevents over-loading and ensures safe operation.Rubber-tipped tongs
• Built-in carrying handle allows for the floor jack to be lifted and moved quickly; Includes a limited 1 year manufacturer warranty

User questions & answers

Question:	i actually have 2 questions. Can this lift a ford explorer and can the long neck be removed
Answer:	The height is 9 1/4"+ a fraction. If you want to say 9 3/8" to be on the safe side you should be good.
Question:	Is there a longer neck I can buy for it
Answer:	Home Depot's website says 10-1/8 to 16-3/8 in.
Question:	Made in USA
Answer:	Home Depot's website says 10-1/8 to 16-3/8 in.
Question:	With long neck attached, and jack all the way down, what is the height
Answer:	Walmart's website says the non-double pin version is made in China so I assume this version is too.

Product features

Torin BIG RED Hydraulic Trolley Service/Floor Jack with Extra Saddle (Fits: SUVs and Extended Height Trucks): 3 Ton (6,000 lb) Capacity, Red

Product description

The Torin BIG RED AT84007R hydraulic garage floor jack can be used for general or heavy-duty industrial use and features a 4 ton (8,000 lb) capacity. With a lift range between 4" to 20", you can gain easy access under low-profile vehicles. It's constructed of durable, high-strength steel and has a powder-coated finish for rust resistance. The dual piston pump lifts loads 5 times faster than a single pump and is ideal for most cars, trucks, and SUVs. Equipped with large steel casters and 360-degree swivel casters for smooth maneuverability. In terms of safety, this Torin service jack even comes with a built-in safety overload system which prevents use beyond load capacity. Wide stance provides added stability under load. Meets ASME safety standards and includes a 1 year limited manufacturer.

• Hydraulic garage floor jack can be used for general or heavy-duty industrial use and features a 4 ton (8,000 lb) capacity
• Dual piston pump lifts loads 5 times faster than a single pump and is ideal for most cars, trucks, and SUVs
• Lifting range from 4" to 20" allows you can gain easy access under low-profile vehicles; Wide stance provides added stability under load
• Equipped with large steel casters and 360-degree swivel casters for smooth maneuverability
• Features a built-in safety overload system prevents use beyond load capacity; Meets ASME safety standards and includes a 1 year limited manufacturer

User questions & answers

Question:	Is this jack manufactured by Big Red ? Or is it a knock off
Answer:	NO ,this car jack is not a knock off, it's manufactured by Big Red.

Product features

Torin BIG RED Hydraulic Low Profile Service/Floor Jack with Dual Piston Quick Lift Pump, 4 Ton (8,000 lb) Capacity, Red

Product description

Capacity: With an impeccable 4 ton capacity, this heavy duty floor jack features a universal joint technology, giving you a more controlled descent. Features: The jack features a twin hydraulic system for faster and efficient lifting; A universal fit, the 2-piece handle helps with positioning, pumping and easy storage; The rear mounted swivel casters provide easy maneuverability. Material: Pinned, and padded saddle provides a quick lift and added vehicle protection, whereas, the flanged side plates give the tool an enhanced sturdiness and increased stability.

• Capacity: With an impeccable 4 ton capacity, this heavy duty floor jack features a universal joint technology, giving you a more controlled descent
• Features: The jack features a twin hydraulic system for faster and efficient lifting; A universal fit, the 2-piece handle helps with positioning, pumping and easy storage; The rear mounted swivel casters provide easy maneuverability
• Material: Pinned, and padded saddle provides a quick lift and added vehicle protection, whereas, the flanged side plates give the tool an enhanced sturdiness and increased stability

Product description

1 to 2 Strokes to Allow You to Lift Immediately to Your Desired Load Height

Pro-Lift G-737 Garage Jack is a 3-1/2 garage jack that features speedy lift function. It allows you to immediately lift to your desired load height with 1 to 2 strokes.

It also features universal joint release mechanism to provide precision control of load descent in any handle position.

Pro Lift G-737 Garage Jack is built with the rolled side frame to add strength and reduce twisting. And, its rear swivel casters give you the easy jack positioning. In addition, it features the rubber saddle pad to protect the vehicle while working with the jack

Plus, there is a magnetic tool tray built - in. It gives you the place to keep small parts around the job site for convenience.

- Rubber Saddle Pad to Protect the Vehicle While Working with the Jack

- Universal Joint Release Mechanism to Provide Precision Control

- Magnetic Tool Tray for Convenience, Also Speedy Lift Technology

- Rolled Side Frame and Rear Swivel Casters

Specifications

- Capacity: 3-1/2 Ton

- Lift Range: 5-1/2 to 22 inch

- Package Dimension: 30.3 x 6.9 x 15.75 inch

- Item Weight: 90 Lbs

Pro Lift G-737 Garage Jack is backed with SFA 90 Days Warranty from the Date of Purchase.

Click the buy button now to get your Speedy Lift Garage jack

• The product is 3-1/2 ton garage jack
• Easy and simple use kit
• The product is manufactured in china
• Rubber saddle protects the vehicle while lifting the vehicle
• Universal Joint release mechanism provides precision control of load descent in any handle position
• Magnetic tool tray keeps the small parts around the job site for convenience
• Rolled side frame adds strength to reduce twisting; professional grade
• Foam handle provides comfort to the user while pumping

User questions & answers

Question:	Is this jack "speedy" with weight on it? Or only until you get it started
Answer:	Capacity: 3-1/2 Ton- Lift Range: 5-1/2 to 22 inch- Package Dimension: 30.3 x 6.9 x 15.75 inch- Item Weight: 90 Lbs
Question:	How long is the handle
Answer:	The saddle w/rubber pad is removable and I suppose if you had a trans adapter that mounts the same. I would check with the manufacture, Shinn Fu America.
Question:	What is the range of lift height in inches
Answer:	This is a 6000 lbs jack with lifting range 11 - 21 inches mainly for truck and large SUV. Toyota Corolla is a small car and the bottom height seems not high enough to put this jack underneath. You may look at other Powerbuilt lower profile jack such as below links https://www.amazon.com/Powerbuilt-620484-Inflactor-Electric-inflator/dp/B01N7RFSGG/ref=sr_1_8?dchild=1&keywords=powerbuilt+jack&qid=1610355068&sr=8-8 https://www.amazon.com/Powerbuilt-240076-Profile-Fast-Floor/dp/B07FSTQ944/ref=sr_1_2?dchild=1&keywords=powerbuilt+jack&qid=1610355233&sr=8-2
Question:	Can the saddle be removed to install a trans jack adapter
Answer:	The 4000 pound Unijack offers lift range from 8-5/8 to 18-3/8 inches, which makes it perfect for sedans, minivans and crossovers. Read more at https://www.powerbuilt.com/products/4000-lb-unijack-bottle-jack-jackstand-in-one#RhgJ8m0L7kYgLlRe.99

Product features

Pro-LifT G-737 Grey Speedy Lift Garage Jack - 3-1/2 Ton Capacity

• Innovative design of Speedy Lift technology offers a quick lift for professional performance
• Swivel saddle provides easy jack positioning and user safety
• Heavy duty, steel construction provides safe use and long term durability
• Bypass device prevents over pumping
• Built-in internal safety valve ensures safe operation
• Rear caster for easy jack positioning

Product description

This heavy-duty steel floor jack from Performance Tool has a max capacity of 7,00lbs (3.5 Tons) with a lift range of 3-1/2" to 20-1/2". The W1645 vehicle lift has a high quantity steel frame, dual pistons for faster lift, and an overload protection bypass valve, all allowing you to use this jack with confidence. The swivel saddle with rubber cushion and swivel wheels in the back allows for easy maneuverability and positioning while in confined working areas. The extra-long frame on this jack stand is designed for maximum stability and safety while the low-profile design allows users to get under almost any vehicle to lift.

• DOUBLE-PUMP MECHANISM: This swiveling vehicle lifter offers quick lifting
• RUBBER SADDLE PAD: Helps lift the vehicle safely without damaging it
• OVERLOAD PROTECTION: Bypass valve offers safety for use in any workplace
• LOAD CAPACITY: 3.5 tons, 7,000 lbs
• LIFT RANGE: Jack stand lifts from 3-1/2 to 20-1/2 inches

User questions & answers

Question:	R the wheels made of metal, or some type of non-metal (plastic
Answer:	Hi Slim, The wheels are made out of metal. This is a "beefy" jack.Hope that helps.Regards,AzNeil
Question:	Can you lower the jack from the handle
Answer:	No. Must use screwdriver (slowly, slowly) on handle end of body, to release hydraulic fluid. If the first answer is correct, Wilmar has changed the design of the jack since I bought it.
Question:	Does this jack can be lift up enough for mazda cx-5 tire change? thanks
Answer:	Yes, it will lift the corner of a Mazda CX-5 easily. I use it on a considerably heavier vehicle and have never had a problem.
Question:	where to add oil
Answer:	you would need to unscrew the pressure screw at the back, all the way out, and then use a very small funnel or a syringe. i guess it is 70 weight or so, but i have not needed to add any oil.

Product description

Omega Lift 3.5 Ton Garage Jack is a heavy duty floor jack that features Magic Lift that provide fast, no load lifts to the jacking point, at which time it lifts in approximately 1/4" to 3/4" increments. It features the unique design with the heavy duty frame and longer chassis that is ideal for trucks and SUVs. The flanged side plates increase strength, and the wider base adds the more stability under a load. It has the jack size of 30-7/8" x 14-7/8" x 7-1/4" and the lifting range from 4 inches from 21-5/8 inches. GQ035 is built with the heavy gauge contruction, cast iron lift arm and the rolled side frame to add the strength and rigidity. Large front wheels and rear casters provides you with easy maneuvering. You may easily move around while providing your auto repair services in your shop or garage. In addition, with by-pass device protection built-in, it prevents from over-dumping. And, the metered release system and U-joint release mechanism allows the precise load control. The saddle is large and swivel with the diameter of 4-3/4 inches. It provides you to easily positioning and user safety Capacity: 3.5 Ton Jack size: 30-7/8" x 14-7/8" x 7-1/4" Min Height: 4" Max Height: 21-5/8" Saddle Dia: 4-3/4" Manufacturer Warranty: One Year GQ035 Magic Lift is covered with One Year manufacturer warranty from the date of the purchase. Heavy Duty Garage Jack with easy maneuvering and giving vehicle a safety lift.

• GQ035 is Omega Lift 3.5 Ton heavy duty car floor jack that built with the strength and duability. It gives you the ability to lift from 4 inches to 21-5/8 inches. With Feature of Magic Lift, it provides fast, no load lifts to the jacking point in approximately 1/4" to 3/4" increments.
• Heavy gauge contruction, cast iron lift arm and the flanged side plates add the strength and rigidity. The large swivel saddle with the diameter of 4-3/4 inches to provide you with the easy jack positioning and user safety
• GQ035 service jack features in-line pump assembly assures long life and no off-center forces for ease in pumping, aligning and reduce wear. And, its sealed hydraulic pump adds the additional durability.
• Patented built-in by-pass device protects hydraulic system from over pumping damage. It also features the metered release system and U-Joint release mechanism to allow for precise load control.
• This 3.5 Ton jack is ideal for auto repair services in the shop and garage. In addition, it is covered with 1-Year warranty from the date of the purchase.

Product features

Omega Lift GQ035 Floor Jack 3.5 Ton - Professional Heavy Duty Hydraulic Magic Lift Car Truck SUV Service Jack

• GQ035 is Omega Lift 3.5 Ton heavy duty car floor jack that built with the strength and durability. It gives you the ability to lift from 4 inches to 21-5/8 inches. With Feature of Magic Lift, it provides fast, no load lifts to the jacking point in approximately 1/4" to 3/4" increments.
• Heavy gauge construction, cast iron lift arm and the flanged side plates add the strength and rigidity. The large swivel saddle with the diameter of 4-3/4 inches to provide you with the easy jack positioning and user safety
• GQ035 service jack features in-line pump assembly assures long life and no off-center forces for ease in pumping, aligning and reduce wear. And, its sealed hydraulic pump adds the additional durability.
• Patented built-in by-pass device protects hydraulic system from over pumping damage. It also features the metered release system and U-Joint release mechanism to allow for precise load control.
• This 3.5 Ton jack is ideal for auto repair services in the shop and garage.

Omega Lift GQ035 Floor Jack 3.5 Ton - Professional Heavy Duty Hydraulic Magic Lift Car Truck SUV Service Jack

• GQ035 is Omega Lift 3.5 Ton heavy duty car floor jack that built with the strength and durability.
• The large swivel saddle with the diameter of 4-3/4 inches to provide you with the easy jack positioning and user safety
• Features in-line pump assembly assures long life and no off-center forces for ease in pumping, aligning and reduce wear.
• Patented built-in by-pass device protects hydraulic system from over pumping damage.
• Ideal for auto repair services in the shop and garage.

Floor Jack 3.5 Ton

3.5 Ton heavy duty car floor jack the ability to lift from 4 inches to 21-5/8 inches.

Service Jack 3.5 Ton

It provides fast, no load lifts to the jacking point in approximately 1/4" to 3/4" increments.

Omega Lift Service Jack

The large swivel saddle to provide you with the easy jack positioning and user safety

Floor Jack 3.5 Ton

in-line pump assembly assures long life and no off-center forces for ease in pumping, aligning.

Product description

The Arcan ALJS3 3-Ton Steel Jack Stands has an overall 3-Ton lifting capacity and a working range of 11-5/8 in. to 17.5 in. A counterweighted pawl locks in place securely to prevent slipping, while allowing easy adjustments. A large contoured saddle with locating lugs helps support and position vehicle frame. The wide stance base delivers superior stability and includes base pads that prevents the jack from sinking into asphalt and provide stable footing for the jack stands. The welded construction and alloyed steel offer years of support. Arcan puts all of our lifting equipment through voluntary and rigorous third party safety testing, as outlined by the ASME PASE-2014 Safety Standard for Portable Automotive Service Equipment, to ensure that our products are among the safest on the market.

• COLORS MAY VARY: ALJ3T (silver) or A20018 (green)
• LIGHTWEIGHT AIRCRAFT-GRADE ALUMINUM: Allows for easy maneuverability.
• DUAL PUMP PISTONS: Quickly raises the floor jack saddle to load.
• REINFORCED LIFT ARM: Increases strength, chassis torsion control, and durability.
• VEHICLE PROTECTION: Designed with a rubber saddle and a foam handle bumper.
• SIDE-MOUNT HANDLE: Allows for convenient jack positioning.
• 2 PIECE HANDLE: Allows for easy storage.

User questions & answers

Question:	how smoothly and slow can a vehicle be lowered
Answer:	This fuel pressure reghulator is set at 43 PSI - identical to the OEM regulator. -Sean 818-574-FUEL
Question:	What is the height range
Answer:	Yes, this will fit the 2013-2018 Can-Am Maverick / Maverick Max 1000 . -Sean 818-574-FUEL
Question:	How big is the saddle and rubber pad on this jack
Answer:	This will be a 100% direct fit for the 2009-2018 Outlander 650. -Sean 818-574-FUEL
Question:	where is arcan made
Answer:	Yes, this will be a 100% direct fit for the 2013-2015 Can-Am Maverick 1000. -Sean 818-574-FUEL

• This is highly durable
• Patented design features both a removable Lift saddle and padded Lift rails
• Lifting capacity of 4, 000 pounds
• Locking safety bar holds jack in place once raised
• Easily lifts cars, trucks, atvs or removing/replacing transmissions or differentials.Handle Length:40 inches
• Patented design features both a removable lift saddle and padded lift rails
• Flexible design allows the Triple Lift to adapt to multiple types of vehicle frames

User questions & answers

Question:	Does it work on 3 ton jack stand too
Answer:	Yes, I used it to raise an air conditioning unit out of the windowsill.
Question:	how high does that jack go off the ground? I need
Answer:	Yes it should work with a 650. Really any motorcycle, scooter. You would slide it in between the front and rear wheel not centered but balanced. I welded tabs and bolted to my table. Then I welded a ring on both sides for a ratchet strap. It is very strong, reliable and sturdy. Use a 7/8 socket to lift and lower the scissor jack it works better than the hand crank that comes with it. Definitely a good buy. Hoping this helps- Mickey
Question:	I was curious with the jack fully extended, what is the height of the jack? I have a Toyota FJ with a 3 inch lift which puts it at 11 inches
Answer:	I like the jack my Harley limited loaded weight at least 900 lb picks it up but no problem good Jack just don't use a air gun on it you got to use a hand ratchet
Question:	what is the minimum height required for this jack to slide under? I need to determine if it will fit under my car
Answer:	Dear customer, our lift is mainly used to lift motorcycles for maintenance. And the weight capacity is 1100 lbs. For safety reasons, we do not recommend that you use it to lift your pool table.

Product features

Powerbuilt 2 Ton Triple Lift Floor Jack

Get rid of your floor jacks, transmission jacks and ATV jacks. The 2 Ton Triple Lift jack is three jacks in one! This innovative jack has a patented design that lets you lift cars, trucks, motorcycles or ATVs with ease.

The Triple Lift slashes the expense and hassle of purchasing, maintaining and storing multiple jacks and jackstands. It's the one jack that easily lifts almost anything with wheels, and works on vehicle transmissions and differentials too.

The secret to the Triple Lift is the patented design that features both a removable lift saddle and padded lift rails. This flexible design allows the Triple Lift to adapt to multiple types of vehicle frames.

A locking safety bar holds the jack in place once the vehicle is raised, which eliminates the hassle of supporting a lifted vehicle with jack stands. Built-in tie-down loops make it easy to secure motorcycles in place for added stability.

Product description

Pro lift T-6906D is a 6-ton double locking jack stands. It features a high quality cast ductile Iron Ratchet bar and sturdy stamped steel base provide durability and longevity which makes ideal for home, professional and farm use. Always used in pairs, counter weighted pawls serve as a safe secure locking device to prevent the load from accidental disengagement. An attached pin lock provides support, locking the ratchet bar in place for an additional carrying point. One piece, multi position ductile ratchet bar provides strength and durability as well as a quick adjustment mechanism that securely locks into the desired position.

• Sturdy stamped Steel Construction with 6 ton capacity
• High quality cast ductile iron ratchet bar
• Double locks mechanism with both handle locks and mobility pin
• Height adjustment mechanism allows smooth upward movement while release handle locks and mobility pin
• Meets or exceeds ANSI/PALD standards. Ideal for home, Auto, truck service, farm, and shop use
• Comes with 2 Adjustable Beam and a Single stand;It has both commercial and residential applications

User questions & answers

Question:	Is the pin attached to the back so it doesn't get lost
Answer:	I took some measurements for you. Base weight 8.6 pounds Tongue weight 4.8 pounds Weight per stand 13.4 pounds each Total weight per set of 2 jack stands 26.8 pounds Tongue head contact size 1 inch x 3-31/32 inches Number of notches in tongue 11 Distance between notches in tongue: 3/4 inch steps Base stand dimensions 9 inches x 10-3/8 inches All height measurements are from floor to lowest U shaped contact point in tongue head (true resting point) Minimum lift height tongue base resting on floor: 14-3/16 inches Minimum height to first notch (non locking): 15-7/16 inches Minimum height to first locking notch: 16-1/8 inches Maximum lift height (locking) 22-7/8 inches. Note the lift is a little higher if you add the top of the saddle points, that is if the object is not resting in the U shaped saddle but at the top of the crown-ridges Weld quality-good/acceptable box and packing o.k. capacity as stated in literature: 6 tons per pair Country of manufacture: China Based on the above, I bought a second set, as I liked the first set.
Question:	Are these 6 tons each or 2 three ton stands that equal 6 tons
Answer:	Lifting range is 6-3/8" to 22".
Question:	How high they can extend and hold
Answer:	china
Question:	Please add some more info to your listing. What's the minimum and maximum clearance? What are the dimensions on the heads? Base
Answer:	These jacks will hold 3 tons or 6,000 pounds. Since you won’t be holding the entire weight of your vehicle you should be fine. These are great light weight jacks for tire changes and auto maintenance too.

Product features

Pro-LifT Double Pin Jack

Pin style jack stands offer the ultimate in security and safety. All Black-hawk Automotive pin style stands are offer some of the best values on the market today.

• Sturdy stamped steel construction
• Height adjustment mechanism allows smooth upward movement while release handle locks into position
• Ideal for auto, truck service, farm, and shop use

Product description

This heavy duty 3 Ton car jack gets vehicles almost two feet off the ground. Extra-low profile reaches under most show cars. Dual piston Rapid Pump technology lifts most work loads in just 3-1/2 pumps.

• Super-tough precision welded construction with an industrial grade finish
• Industrial quality for professional mechanics and hardcore automotive enthusiasts
• Rapid Pump exclusive dual parallel pump system lifts with far fewer pumps
• Universal joint release provides precise load control in any handle position
• Extra-wide steel casters for stability

User questions & answers

Question:	Is this jack suitable to lift my motor to replace freeze plugs under the motor mounts
Answer:	The jack dose not stay up
Question:	What is the diameter of the saddle? Looking to get a rubber pad and need to know the size
Answer:	Outside diameter of the saddle pad is 4 1/4" .... There is a shoulder ( approximately 1/4" or more) to consider and inside diameter of it is 3 5/8" ... If I were putting a rubber pad on mine, I would stick with a 3 1/2" diameter... Another option, to maintain full pad diameter, would be to go with a 4 1/2" rubber pad and machine a surface just for that shoulder and the 4 dog ears that stand even a little taller. Good luck...
Question:	What is the maximum height when fully extended? In inches please. Thanks
Answer:	Maximum Lift Height (in.) 19-3/4 in.
Question:	Do i need to also purchase jack stands or will this do the job on its own
Answer:	YES. An automotive floor jack serves ONE PURPOSE: to elevate a vehicle TEMPORARILY to permit clearance for one or more floor jacks to support the vehicle. This floor jack does not come with stands. You must purchase a pair of floor jacks separately. Do not use this or any automotive floor jack to support a vehicle.