14 best oil extractor for car

Product features

Luxury Oatmeal Cookies from The Baking Bible

What makes this cookie really special is that instead of adding rolled oats and nuts to the dough, I make my own granola. The oats and nuts get tossed with just enough brown sugar and maple syrup to sweeten them lightly and then they are baked at a very low temperature to crisp and infuse them with the sweetener and fully bring out their flavor. The granola recipe, a gift from my multi-talented friend and fellow cookbook author Caitlin Williams Freeman of San Francisco MOMA and Blue Bottle Coffee, also contains cinnamon and vanilla, and any left over is excellent sprinkled over yogurt. These cookies are crisp and chewy and soften slightly on storage.

Oven Temperature | 225°F/107°C for the granola; 375°F/190°C for the cookies

Baking Time | 20 to 22 minutes for the granola; 12 to 15 minutes for the cookies for each of three batches

Special Equipment | One 17¼ by 12¼ by 1 inch half sheet pan | Two 15 by 12 inch cookie sheets, no preparation needed or lined with parchment

Granola (makes about 5 cups)

Preheat the oven | Twenty minutes or longer before baking, set an oven rack in the middle of the oven and preheat the oven to 225°F/107°C.

Make the granola | In a large bowl, toss together the oats, walnuts, brown sugar, cinnamon, and salt. Pour on the maple syrup, oil, and vanilla and toss to coat the oat mixture thoroughly. Spread the mixture evenly on the half sheet pan and bake for 20 minutes. Turn the pan halfway around after the first 10 minutes. Remove the pan to a wire rack to cool to room temperature. You will need 4 cups/14.8 ounces/420 grams of granola for the cookie dough.

Raise the oven temperature to 375°F/190°C.

Product description

EASY TO USE: The OEMTOOLS 24389 5.3 Liter Hand-Pump Fluid Evacuator is a remarkable time- and effort-saving oil change tool. This fluid extractor is designed to vacuum pump oil while preventing mess. We've made it easy for anyone to change automobile fluids without needing to get under the vehicle or to use a shop lift. This is a topflight dipstick oil change pump. NO MESS: The OEMTOOLS manual fluid extractor (oil, transmission fluid, radiator coolant, etc.) is thoughtfully designed with a shutoff valve that prevents overflowing. And because of the easy-to-remove lid, the oil or extracted fluid can be dumped for easy recycling. If you're looking for the best oil extractor, look no further. FOR PRO & DIY MECHANICS: Anyone who’s ever changed their oil at home has probably dreamed about changing their oil without the need to shimmy beneath their vehicle. The OEMTOOLS manual oil extractor makes this dream a reality. Pump fluids out from their dipstick tubes. No mess, no worries. This is a versatile fluid pump, ideal for use on boats, RVs, and personal vehicles; it even makes a great lawn mower oil change pump. This fluid extractor pump is perfect for both professional and DIY mechanics. PRODUCT SPECIFICATIONS: 5.3 Liters (1.4 Gallons) fluid capacity. Hand pump. Shut off valve for mess free extraction. Fluid extractor’s lid is removable to allow for easy recycling or disposal of waste fluid. 5 feet of pneumatic flex hose that snaps into the coupler with a firm press and is removed by unscrewing the coupler, breaking the suction. One 41 inch extended dipstick hose adapter and 17 inch suction tube completes the set.

• MULTI FLUID-REMOVAL TOOL: This manual vacuum pump is more than just an oil extractor pump; Remove engine oil, transmission, radiator coolant, water, and more; Versatile and easy to use manual oil extractor, transmission fluid pump, boat oil change extractor pump, and more
• FLEXIBLE HOSE: Pneumatic / manual vacuum pump includes a 5 foot main flexible hose that snaps into the coupler with a firm press and is removed by unscrewing the coupler, breaking the suction; 41 inch extended dipstick hose adapter
• VEHICLE FLUID REMOVAL TOOL: Fluid pump extractor evacuates fluids directly from dipstick tubes; At 5.3 liters of capacity, this manual oil and fluid pump can be used as an oil change pump extractor and fluid transfer pump on most light and heavy duty vehicles
• FOR PRO AND DIY MECHANICS: This convenient manual oil pump extractor is perfect for professional and DIY mechanics; Quickly and easily remove oil, radiator fluid, transmission fluid, and more; Oil suction pump's lid removes for easy oil recycling
• PRODUCT SPECIFICATIONS: 5.3 liter fluid capacity; Manual pump; Shut-off valve for mess free extraction; Fluid extractor’s lid is removable to allow for easy recycling of waste fluid; 41 inch dipstick hose adapter, 5 foot main removal flex tube, and 17 inch suction tube

User questions & answers

Question:	do i have to cut the crimped end of the hose to get it to work
Answer:	Hello, The exam gloves are suitable for simple medical use. They meet or exceed ASTM 5250 (Standard Specification for Poly(vinyl chloride) Gloves for Medical Application)
Question:	What and how do i clean out the pump for storage. Thanks
Answer:	I really don't know the thickness mil wise. I checked over the box and the thickness is not marked anywhere on the box. Looking on some charts online possible 1 mil. They are pretty thin and you can read through an empty glove. I have thicker ones, but I use these more to lesson my exposure to viruses and bacteria. They are fairly sturdy in spite of the thiness. I've only had one tear once and I've probably gone through 30-40 pairs so far. I keep a plastic trash bag in my car and wear these in the store while grocery shopping and then throw them away when I get back in the car. I use them for touching doors, pushing and touching carts.
Question:	Can this product be used to extract gasoline
Answer:	In china
Question:	Why can't I have this product shipped to California? Is it illegal for some reason
Answer:	china

Product features

The best thing to happen to chocolate since Willy Wonka.

Everything Chocolate is a collection of sumptuous recipes made simple to showcase the very boldest and intense chocolate flavors. Best of all, these recipes show that working with chocolate doesn't require a chocolatier's patience.

Celebrating the Holidays

Chocolate-Raspberry Heart Cake

This heart-shaped cake has undeniable chocolaty richness. A generous amount of both cocoa and semisweet chocolate paired with Swiss meringue buttercream helps to balance out the richness of the cake.

Dazzling Desserts

Chocolate-Lavender Napoleon

A traditional Napolean features layers of flakey-crisp puff pastry sandwiching cool, dreamy vanilla pastry cream—but we're happy to break tradition if it means adding chocolate. This twist on the classic, features an intriguing flavor profile of lavender and chocolate that uses a chocolate-lavender pastry cream to highlight the subtle yet distinctive lavender flavor.

DIY Confections

Brigadeiros

This gooey, chocolatey, caramel-y Brazilian candy treat couldn't be easier. Sweetened condensed milk, cocoa powder, and butter are cooked until thick and then poured to chill before being rolled into truffle-size nuggets. The best part? Coating the Brigadeiros in fun toppings!

Nostalgic Treats

Chocolate-Dipped Potato Chip Cookies

This retro treat brings together sugar, salt, and crunch for an addictive combination of flavors and textures. To take this old-fashioned cookie to the next level, these are dipped in chocolate for a sophisticated finishing touch.

Wake Up With Chocolate

Chocolate Cake Doughnuts

If you're going to have a doughnut for breakfast, it should be tender, moist, and richly chocolaty. This easy recipe uses sour cream and a generous amount of intense unsweetened cocoa powder to bring these doughnuts to textural and flavorful perfection.

A Spoonful of Heaven

Double Chocolate Dessert Waffles with Ice Cream

Everybody loves breakfast for dinner, but what about breakfast for dessert? The honeycombed surface of a waffle makes it the perfect "dish" on which to serve a scoop of ice cream for a fun and unexpected treat!

Bakery Case Favorites

Millionaire's Shortbread

This rich British confectionary hybrid that features a crunchy shortbread base; a chewy, caramel-like filling; and a shiny, snappy chocolate top. For this recipe, bittersweet chocolate ensures that the chocolate is more than just an afterthought for this rich yet refined cookie.

Ganache: The All-Purpose Chocolate Ingredient

It sounds posh but it's pretty basic, just equal parts chocolate and cream melted together to create a decadent mixture. Tweak the ratio or temperature, or add other ingredients, however, and it becomes truly versatile—able to serve as a filling, frosting, glaze, or even candy.

Good Ol' Ganache: Cream gently heated then poured over chopped chocolate to melt. A creamy smooth glaze for brownies, cookies, and our Chocolate Raspberry Torte.

Room Temperature Ganache: Let your standard ganache sit at room temp for 15 to 30 minutes and it becomes a spreadable filling for Chocolate-Espresso Dacquoise.

Chilled Ganache: Transfer standard ganache to the fridge for 45 minutes or longer and it becomes scoopable, perfect as the creamy center of sandwich cookies or a decadent cake frosting

Rich Borscht with Cacao Accent

Beets and chocolate are great together, as they both have deep, earthy tastes that complement one another in this creative borscht. Firm and soft textures and a rich, silky broth combine for a luxurious experience. Beets are a unique source of the phytonutrient group called betalains. Betanin and vulgaxanthin, two examples of betalains, have anti-inflammatory and antioxidant properties. They are the source of the deep red color that beets, and borscht, are known for.

8 cups (1.9 L) vegetable, mushroom, or potato broth (or 8 cups [1.9 L] water mixed with 1 or 2 bouillon cubes)

1 to 1 1/2 teaspoons salt

2 cups (220 g) diced potatoes

5 cups (1.1 kg) diced beets

1/2 cup (80 g) chopped red onion

1/2 cup (65 g) diced carrots

2 minced garlic cloves

1 teaspoon dill, or to taste

1/2 teaspoon paprika

1/2 teaspoon caraway or cumin seed, crushed

1/3 cup (32 g) raw cacao powder or to taste

2 to 3 tablespoons (28 to 45 ml) lemon juice

Chopped scallions, for garnish

Bring all ingredients, except the cacao powder, lemon juice, and scallions, to a boil in a large soup pot. Lower the heat to a simmer and cook for 20 minutes. Stir in the cacao powder and cook for another 20 minutes. Stir occasionally during this time.

Add the lemon juice and remove from the heat. Serve with the scallions and any other accompaniments you wish.

Variations: Mix up the ingredients for this soup by adding 1 cup (90 g) chopped cabbage, 1 minced chile pepper, 1 cup (70 g) sliced mushrooms, or 1 cup (166 g) diced tempeh to the pot. Garnish with grated chocolate on each bowl before serving.

Yield: 8 servings

Includes 5 Ft. Flexible Suction Hose and (1) 41-Inch Dipstick Tube

Simply insert the O-Ring plug of the main suction tube into the reservoir adapter located on the reservoir cap.

After inserting the main suction tube into the reservoir adapter, insert the 41" dipstick tube into the 1/4" diameter connector on top of the reservoir (pictured). Ensure all of the tube connections are tight to prevent leakage.

Automatic Shutoff Valve Prevents Overflow with Flotation Assembly

Extract the used motor oil by pumping the evacuator handle several times to create a vacuum. Once the fluid begins to flow into the reservoir, continue to operate the pump until all the fluid has been drained from the engine crankcase.

When oil in the tank reaches the maximum level, the vacuum is designed to automatically release to prevent fluid overflow.

If the maximum fluid level is exceeded, the automatic shutoff valve will release and the vacuum pump mechanism will float to instantly stop vacuum suction and prevent spillage. The flotation halts all fluid suction.

Leak Proof Single-Piece Body Ensures Maximum Fluid Vacuum Power with No Mess

Our smart design features a one piece plastic body attached to a heavy duty base, and adapters with excellent spillproof fitment to ensure you never end up with oil or coolant on your shop floor.

OEMTOOLS vacuum pumps are also suitable for low viscosity fluids such as water or coolant. No matter the viscosity of the fluid or the pressure applied to the vacuum pump, OEMTOOLS' fluid evacuators are designed not to leak or spill.

Large Heavy Duty Hand Pump for Maximum Power Fluid Transfer

Our manual oil extractors will move as much fluid as fast as you can pump. The oversized heavy duty handle is built to last and will stand up to plenty of force. Simply pump until a vacuum is created and fluid begins to fill the reservoir.

When the system flush is completed, remove the main suction hose from the reservoir adapter. Pour the used oil or transmission fluid from the reservoir into a suitable container, then dispose of the fluid in an appropriate manner.

Let OEMTOOLS help you get jobs done faster with one of our brilliantly designed vacuum pumps

Extracts most fluid types: engine oil, transmission fluid, gear oil, coolant, and power steering fluid. Also for use on boats and other kinds of watercraft as a marine oil changer.

Get even more use out of your new vacuum pump with our Manual Fluid Extractor Hose (pictured below) which converts the OEMTOOLS Manual Fluid Evacuators into vacuum brake or hydraulic clutch bleeders. It's unbelievably easy and clean to flush out your brake hydraulic system with our amazing product line.

• 【 Speedy Extraction 】 Fast suction and extraction speed of 1.8L /min. The oil changer extracts engine oil in a 4 cylinder car within minutes at pneumatic mode and leaves no mess to clean afterward
• 【 2 Options Usage 】 Fluid evacuator equips with pneumatic and manual mode to fit any condition. The pneumatic mode turns the pump into a high-speed oil changer while the manual mode requires no other equipment to use
• 【No Oil LEFT】Vacuum Fluid Extractor comes with 4 kinds of tubes with different diameter go into the bottom of oil pan. The fluid extractor can be used to remove fluids from engine oil to brake fluids. It has a 6.5L reservoir, 1*3.5 ft flexible hose and 3 * 3.39ft extra dipstick hoses to reach the very bottom of the reservoir and suck up every drop of oil
• 【 Plus Version 】 Upgraded accessories, upgraded convenience. This fluid extractor comes with storage unit for collecting hoses when not in use, sealing cap to keep the tank safe for transporting and the extra brake bleeding hose turns the pump into vacuum brake bleeder.
• 【 Work Freely 】 Not limited to places, change oil anytime and anywhere! Perfectly extracts most fluid types: engine oil, transmission fluid, gear oil, coolant, and power steering fluid. Applicable on cars, lawn mowers, boats, jet skis and etc. *Note: Gasoline, and fluid with high volatility, high corrosion, high alkalinity, high temperature are FORBIDDEN to be applied on the extractor.

User questions & answers

Question:	Can this be used to pump fluid
Answer:	The vacuum pump set only has the parts for pumping out your system. Go to the Amazon page for the kit and look at the "Frequently Bought Together" section. You need to ALSO buy the screw-on can tap and the R134a adapter if you want to refill your system.
Question:	Does that include all the Pipes with it
Answer:	Solo para hacer vacío No se puede almacenar el freon ya que lo contamina con el aceite de la bomba .
Question:	Has anyone used this on a Mercedes E350 W
Answer:	No you can't evacuate your ac with this system. If your system is full, take it somewhere to recover the freon. You can use this pump to draw a vacuum after you replace the compressor so you can check for leaks and then replace freon. Don't forget to add oil if the new part does not come with it pre-installed.

Product features

Oil Changer Vacuum Fluid Extractor Makes The Oil Extraction Job Easier and Faster

What You Can Get:

• 6.5L Oil Changer Vacuum Fluid Extractor ×1
• Brake Bleeding Hose with check value
• Main Tube ×1
• Extention Tube ×2
• Wire Dipstick ×1

Gasoline, fluid with high volatity, high corrosion, high alkalinity and high temperature are forbidden to be used with this fluid extractor

Step 1 Preparatory Work

• Make sure working temperature between 35°F-175° F. To make the extraction job smooth and easy, evacuate the oil while it is warm

Step 2 Install The Tube

• Remove the cylinder cover, select a suitable tube to insert (The extension tube can be used according to the actual situation) until it reaches the bottom of the oil pan

Step 3 Extract Oil

• Pneumatic: Connect the 1/4" NPT quick coupler to the air compressor. Set the the operating pressure between 40-170 psi.
• Manual: Pump the fluid extractor with your hands. Get the job done anywhere and anytime.
• Make sure the tubes are connected tightly before extracting.

Step 4 Pour Out The Oil

• Do Not extract the oil over the limited line to prevent any spilling and leaking.
• Press the decompression valve to release the negative pressure. Remove the hose clockwise.Pour out the used fluid to another container and take it to the nearby disposal center for recycling.

Iron Wire

• Hold up the soft and thin tube strongly when inserting it into the dipstick tube.
• Clean up the tube after using

Long Enough to Reach the Bottom

• Extend main tube by connecting it with extension tube to suck up every drop of oil down to the very bottom of the reservoir.
• Before extraction, make sure the tubes are connected tightly and long enough

Air Control Valve

• 1/4” NPT quick coupler
• In order to maintain the consistent vacuum pressure, please close the air inlet valve while operating in manual mode.

Product description

Features:

Specifications:

Material: Plastic & Aluminium

Color: Black, Yellow

Input Voltage: DC 12V

Wattage: 60W

Current: 5A

Motor Oil (40-60 degrees) Flow Rate: approx. 1L / min

Diesel Flow Rate: approx. 250L / Hour

Inlet Hose Length: approx. 155cm/61''

Inlet Hose Outer Diameter: 6mm/0.236''

Inlet Hose Inner Diameter: 4mm/0.157''

Outlet Hose Length: approx. 124.5cm/49''

Outlet Hose Outer diameter: 12mm/0.472''

Outlet Hose Inner Diameter: 10mm/0.39''

Line Length: approx. 71cm/28''

Package Weight: approx. 1070g

Package Included:

1 x Pump

1 x Outlet Hose

1 x Inlet Hose

2 x Hose Clamps

2 x Battery Clamps

• 【Specificaiton】: Input Voltage: DC 12V; Wattage: 60W; Current: 5A;Motor Oil (40-60 degrees) Flow Rate: approx. 1L / min
• 【Easy Installation】: you just need to place the inlet and outlet hoses at the appropriate positions, connect the power clamps to the car battery and press the button. This process is very simple and you can often do it by yourself to ensure your engine runs smoothly.
• 【 Ideal Equipment For 】: Extracting Motor Oil From Your Vehicle Without Mess & Specialised Tools Extract The Oil From Your Car, Motorcyle, Scooter, Quad Bike, Truck, Boat, Forklift, Generator, Tractor, Ride On Mower Etc Siphon & Transfer Diesel To Cars, Trucks, Ships, Boats, Tractors, Farm Machinery, Plant Equipment Etc.
• 【Package Included】: 1 x Pump; 1 x Outlet Hose; 1 x Inlet Hose; 2 x Hose Clamps; 2 x Battery Clamps
• 【WARNING】: This product is NOT suitable for gasoline/petrol. Do not use this pump to extract water, gearbox oil or easy flammable liquids (fuel, petrol etc)

User questions & answers

Question:	What about the oil filter
Answer:	Im not sure what you're asking. Of course, you simply replace the oil filter. This tool simply sucks out the oil in the oil pan. You'll still want to unscrew the engines oil filter and install a new one.
Question:	can i buy a replacement small tube , mine seems to have a hole near pump end
Answer:	Sure, at any hardware store.
Question:	My last pump leaked from the pump housing after a few oil changes... looks the same but different brand; didn't last long. Anyone else's leaked
Answer:	Mine leaked after 1 use ,and never worked again
Question:	How long is the tubing? Is it at least 5ft
Answer:	As I recall the tubing was long, at least four feet or more.

• 【Efficient Electric Pump】Oil change pump, a great helper for quick and clean oil changing and transfer, all parameter is verified by multiple test. Diesel Flow Rate: 1.5L/min, Engine Oil Flow Rate(40-60℃): 0.3L/min, Inlet Tube Length: 1.2m/47.2in, Outlet Tube Length: 1.4m/55.1in, Voltage: 12V, maximum current: 7A, maximum power: 80W
• 【4 Hose Clips and a Screw Driver for Secure】The diesel change pump come with 4 hose clip enable to thoroughly seal the connection and prevent leaking. A screw driver would help you to secure the hose clips easily, ensure a smooth oil transfer.
• 【Premium Quality】The quality of oil change pump extractor varies widely. We are using pure copper for the motor and alligator. Good electrical conductivity, corrosion resistance and rust free, effectively avoid leakage or short circuit.
• 【MUST KNOW】A, This oil transfer pump CAN NOT transfer WATER, GASOLINE, PETROL, FUEL or FLAMMABLE LIQUID. B, We tested oil change pump before they ship, therefore, there might be little oil stain in the pump, kindly understand. C, Please DO NOT misplace the direction of import and export, positive and negative poles, and secure the hose clamps before use.
• 【Operation Tips】A, Heat up your engine oil to104 ° F-140 ° F (40℃-60℃) before using the pump to avoid clogging the oil pump due to oil solidification, normally the heating takes about 15 minutes. B, To make it last longer, it is recommended to keep a little oil inside when the oil change pump is not in use.
• 【Widely Application】This Scavenge Suction Kit is portable and easy operation, it saves time and keep clean for your oil changing. It is a great helper for Car, Motorcycle, Scooter, Quad Bike, Truck, RV, ATV, Boat, Marine, Forklift, Generator, Tractor, Ride On Mower Etc. Any questions or using problems, please kindly contact us, we will solve your problem within 24 hours

User questions & answers

Question:	Is this compatible with power steering and/or transmission fluid
Answer:	Mostly just palms

• 【2 WAY USAGE】Pneumatic and manual mode to fit any condition. The pneumatic mode provides higher speed while manual mode requires no other equipment to work with.
• 【SPEEDY EXTRACTION】Fast extraction speed of 1.8L /min. The oil change pump extracts engine oil in a 4 cylinder car within 5 minutes at pneumatic mode.
• 【NO OIL LEFT】 Vacuum Fluid Extractor comes with 5 kinds of tubes with different diameter go into the bottom of oil pan. The fluid extractor can be used to remove fluids from engine oil to brake fluids. It has a 6.5L reservoir, 3.28 feet flex hose and 3 extra dipstick hoses to reach the very bottom of the reservoir and suck up every drop of oil.
• 【Easy to Use】With FOUR UNCLES oil extractor, you don’t have to get under the car anymore to do fluid changing and there is no mess to clean afterward. Just simply open the hook and insert tube to change engine oil.
• 【WORK FREELY】Not limited to places, change oil anytime, anywhere. Perfect for working on a car in the garage, also suitable for using outdoors on boats, truck, or lawn mowers.

User questions & answers

Question:	How long is the warranty? If May of the plastic parts break/ come apart will they send out or replace broken part
Answer:	They are supposed to look distressed! I love mine!
Question:	Should i hear an air hiss when i pump? i do and i lose vacuum pretty quickly and have to pump repeatedly
Answer:	No it doesn’t. 👍🏼
Question:	How is cleaning the tank? Is it ok to left some oil in the bottom
Answer:	Yes, there is a slight variation of color which does give them more "depth" in the look of the edging and in any area where there is the design feature.
Question:	Brake caliper is held by_______
Answer:	Yes. The plates are very large, quite heavy and I wouldn’t put them in the dishwasher. The edging is fragile. They look beautiful on the table but aren’t very practical.

Product features

Pneumatic/Manual Oil Changer

Step 1 .Preparatory Work

• The operating temperature is between 35 ° F and 200 ° F. Cool down the engine at least 15 minutes after driving.
• If the car has not been used in the past 4 hours, preheat for at least 3 minutes before extraction.

Step 2 .Install The Tube

• Remove the cylinder cover, select a suitable tube to insert.
• If the hose is not long enough, connect an extension tube to the main tube, until it reaches the bottom of the oil pan.

Step 3 .Extract Oil

• Pneumatic: Connect the 1/4" NPT quick coupler to the air compressor. Set the the operating pressure between 40-170 psi.
• Manual: Pump the fluid extractor with your hands. Get the job done anywhere and anytime.
• Make sure the tubes are connected tightly before extracting.

Step 4 .Pour Out The Oil

• Press the decompression valve to release the negative pressure. Remove the hose clockwise.
• Pour out the used fluid to another container and take it to the nearby disposal center for recycling.

WARNING

• Do not extract the oil over the limit line on the tank, the bottom line helps prevent any spilling.
• If the fluid goes over the limit line, it might flow into the vacuum chamber and cause leaking from bottom.
• Noted that the fluid should not be over the limit line while pouring.

Long Enough to Reach the Bottom

• Extend the main tube by connecting with extension tube to reach the bottom of the reservoir, suck up every drop of oil.

Iron Wire Make it Easier to Operate

• Insert the wire dipstick into the tube, hold up the soft hose strongly.

1/4” Air Inlet

• Connect to the air compressor, save effort and provide higher efficiency.

Product description

Features:

Transparent Plastic: The transfer liquid pump is made of transparent plastic and is lightly lubricated to ensure smooth operation. The pipeline is also transparent, you can clearly see how much pipeline capacity is left.



Simple Syringe-Action to Quickly and detachable that it is easy-to-clean.



Perfect for a variety of fluid extracting or changing applications in car, motorcycles or marine.



Good quality, used it to change power steering fluid, worked well enough.





Spec.:

Material: Plastic

Extractor Size: 30cm/11.8inch

Plastic Tube Size: 20cm/7.8inch

Color: Transparent

Capacity: Up To 7oz (200 Cc)





What You Get

1 X 200cc Extractor

1 X Rubber Connector

2 X Plastic Tube

• 1.This transfer liquid pump is lightweight and detachable that it is easy-to-clean. They also has 2 flexible tube for easy accessing reservoirs and includes a non-drip rubber cap.
• 2.An easy tool to remove and fill brake fluid, engine oil, gear oil, transmission fluid oil, water through simple syringe-action to extract or dispense fluids in or out quickly and cleanly.
• 3.Suitable for brake fluid, engine oil, gear oil, transmission oil, water, oils & fluids etc. Perfect for a variety of fluid extracting or changing applications in car, motorcycles or marine.
• 4.Package including 1 X 200cc Extractor, 1 X Rubber Connector, 2 X Plastic Tube.
• 5.If you're unsatisfied with this item for any reason, please feel free to contact us, we will reply and offer a satisfied solution in 24 hours.

Product description

Oil transfer pump extractor excellent power-driven design makes it quite labor-saving and convenient than manual ones.

No more jacking of vehicles or removing drain plugs. Great value for a simple, low-cost oil change pump.



Material: Plastic & Aluminium

Rated Voltage: DC 12V

Rated Power: 60W

Maximum Flow: 5L/min

Maximum Pressure: 0.8MPA

Motor Oil (40-60 degrees) Flow Rate: approx. 1L / min

Diesel Flow Rate: approx. 250L / Hour

Line Length: approx. 71cm/28''



Diesel Flow Rate: approx. 250L / Hour

Inlet Hose Length: 155cm/61''

Inlet Hose Outer Diameter: 6mm/0.236''

Inlet Hose Inner Diameter: 4mm/0.157''

Outlet Hose Length: 124.5cm/49''

Outlet Hose Outer diameter: 12mm/0.472''

Outlet Hose Inner Diameter: 10mm/0.39''



Package:

1 x Oil change pump extractor

1 x Outlet hose

1 x Inlet hose

2 x Hose hoops

2 x Battery clamps

1 x User manual



Note:

1. NOT suitable for extracting: water (no lubrication of the pump), gearbox-oil (too viscous) and easy inflammable liquids (petrol, gasoline, etc.)

2. The working-period for this oil-extractor should not exceed 30 minutes. we recommend a short break after 10-20 minutes continuous usage to allow the unit to cool.

3. Do not pump fuel, petrol, paraffin or other easily en-flammable liquids-Danger! Do not pump water(no lubrication of the pump). Only pump warm motor-oil(40-60degrees) do not pump off motor-oil.

4. If you want to connect this pump to AC power, you will need a power converter.

5. If you have not used it for a long time, it may have no suction, then just pour the water in the pump, and run the pump for a few minutes until the air is all out.

• 【High Efficient】This oil transfer pump is an ideal equipment for quick easy and clean safety oil-changes. Flow Rate: 3L/min flow rate for engine oil, 4L/min for diesel. Voltage: 12V, maximum current: 5A, maximum power: 60W.
• 【Application】This oil transfer pump can change engine oil and diesel for cars, boat, motorbike, truck, RV and ATV and other 12V vehicles.
• 【Easy Installation】You just need to place the inlet/outlet hoses at the appropriate positions, tighten the hose clamps, connect the power clamps anode and cathode to the car battery properly and press the button. Oil will be extracted by itself.
• 【Note】To pump oil properly, please start the vehicle to heat up the oil (to 40~60 degrees)about 15 minutes. Otherwise, the oil change pump may have low suction or jammed.
• 【Warning】This product is not use to extract water, gearbox-oil(too viscous) or flammable liquids (fuel, petrol etc).

User questions & answers

Question:	Can this electric oil transfer pump be used for multiple fluids without contamination
Answer:	Yes. As long as you wipe dry well after use this oil change pump.
Question:	Can oil suction pump be used to remove the brake fluids
Answer:	We do not recommend pumping high-viscosity oil. But If you encounter high-viscosity oil, please heat it and become thinner and can be pumped.
Question:	Can I use this oil change pump on my Car
Answer:	Yes! To pump oil properly, please start the vehicle to heat up the oil (to 40~60 degrees)about 15 minutes. Then flameout, put the thin tube into the car oil tank. Plug in the power and press "o" to start.
Question:	Will this oil fuel transfer pump work to drain the gas out of a car gas tank
Answer:	Do not drain gas from gas tank with this oil change pump !!! Use electric oil transfer pump extract gas is danger, that will sparks can set your car on fire !

• 【Features】：Voltage：DC12V, Maximum current: 5A, Maximum power :80W.Flow Rate: Diesel Fuel :Approx. 1.5l/ min, Motor Oil Flow Approx.0.3l / min. The elastic power wire can be stretch to 4-5 feet. Long enough for most engine bays.
• 【Easy to use】: Install the oil extractor inlet and outlet hose, tighten the hose clamps, connect the power clamps to the vehicles battery and press the button to start it. No more mess tools needed, the hoses and hose clamps are included in the package. This process is so simple that you can do it by yourself at home.
• 【Portable 80w Oil Extractor Pump】: Lightweight and portable oil pumps bring a lot of convenience for you. Ideal oil pump for oil change.12V 80W has enough power to change engine oil and diesel from cars, motorcycles, RVs, boats ect. You can quickly complete the oil change.
• 【Safe Operation】:To pump oil properly, before use,please heat up car engine to 104°F-140 °F (40℃-60℃) about 15 minutes in order to prevent the oil from solidifying and blocking. Tips: it is NOT suitable for gasoline/petrol. Do not use this fluid oil change pump to extract water, gearbox oil or easy flammable liquids (fuel, petrol etc).
• 【What you get】:Package included: 1 x Pump; 1 x Outlet Hose; 1 x Inlet Hose; 2 x Hose Clamps; 2 x Battery Clamps. Service warranty: 12month warranty and friendly customer service.Please contact us via email if has any question.

User questions & answers

Question:	Will the pump work for my Chevy Truck
Answer:	Because California is full of nut jobs.
Question:	Will the hot motor oil melt the plastic tubing
Answer:	I wear a woman's size 7 glove and these are plenty big enough with room to spare. I think they would fit hands that are quite large. They are really nice!
Question:	How to clean it to pump different fluid
Answer:	I never remove the pouches for heating or freezing. So far, so good. 👍
Question:	Where could I buy a longer 6mm suction probe
Answer:	I got these for my wife when she was going through chemo so she was inside but they stayed warm for a few hours. Would likely be less if you are wearing them outside but for just a walk they should be good.

Product features

Kemimoto 6L Engine Oil Extractor

Product Contents

1. Oil Can x1

2. Plug x1

3. Oil Can Cover-1 x1

4. Oil Extractor x1

5. Oil Pour Spout x1

6. Handle x1

7. Oil Can Cover-2 x1

8- 11. Hoses x4 (2.5mm H/4mm/ 6mm Hose/ 8mm Hose

Step 1: Thread the handle onto the pump

1. Assemble oil can [1], plug [2], oil extractor [4], handle [6] and cover-2 [7].

Step 2: Choose the size you need:

2. According to actual situation, choose different specification of hose to pump out the oil. There are four specifications of hoses for your choice. (2.5mm, 4mm, 6mm and 8mm).

Step 3: Put the hose on

3. Install black rubber plug of hose to the cover-2 [7], put the other end of hose into engine, then use handle [6] to pump out the oil. Remember to warm up the oil before extracting.

Step 4: Easy to pump

4. You need to manually operate

the handle [6] every 10-15 seconds.

Step 5: Use the oil pour spout

5. After pumping out all the oil, remove cover-2 [7] and hose, then install oil pour spout [5].

Step 6: Pour the oil out

6. Now you can pour the oil out from the oil can easily [1].

Step 7: Store the oil pump

7. Seal the oil can [1] with cover-1 [3] and put it into the box when it is not in use.

Easy oil change for your Lawn Mowers

Easy oil change for your cars/ UTV/ ATV/ Motorcycle

Easy oil change for your boat

Easy oil change for any Small Engine Equipments

Wide Application For All Vehicle

Fit Most Equipment to Change Oil- Cars, Truck, Boats, Lawn Mowers, Motorcycle, Jet Ski, Seadoo, etc.

Specifications

Color: Black + Yellow

Motor: 12V D.C

Power Draw: Approx. 80W 5A

Sound Level: 70 dB(A)

Vibration: <2.5m/s2

Diesel Fuel/Heating Oil Flow Rate: Approx. 0.2 L / min

Motor Oil (40°C - 60°C) Flow Rate: 1.5 L / min

Product Size

Pump Weight: 1KG Package Weight:23.5lb

Some tips for you

• Do not pump water and do not use water to test the machine. Do not use for petrol / gasoline, water, fuel or other easily flammable liquids.

• The maximum working period shall not exceed 30 minutes.After 30 minutes of work, it must be stopped and use it after cooling. This will help to increase its service life.

• After using the pump, there is no need to clean the inside of the oil pump and the oil pipe, just wipe the outside clean and put away.

Quick and Clean oil changes

• Efficient Extraction Pump: To pump your motor oil properly, please start the vehicle to heat up the oil (to 40~60 degrees)about 15 minutes! Otherwise, the oil change pump may have low suction or jammed. Lotyes oil change pump replaces manual operation and works by connecting the clamps to the vehicles 12V battery. It's high efficiency, rapid and saving effort.
• Clean and Tidy: An ideal equipment for quick and clean oil changes. No more mess tools needed, the hoses and hose clamps in the package can prevent leakage during the extraction process.
• Easy installation: Install the oil extractor inlet and outlet hose, tighten the hose clamps, connect the power clamps to the vehicles battery and switch the button on.
• Versatility: This oil transfer pump can change engine oil and diesel for cars, boat, motorbike, truck, RV and ATV and Other Vehicles. WARNING: THIS PRODUCT CAN NOT USE TO EXTRACT WATER, GEARBOX OIL OR FLAMMABLE LIQUIDS(SUCH AS FUEL,PETROL,GASOLINE,ETC).
• What You Get: Lotyes oil extractor pump, outlet hose, inlet hose, hose clamps, battery clamps, user guide. We are certain that you will love the design and high quality of the product. Because you are our number 1 priority, we are offering premium customer support and money-back service for a risk-free purchase.

User questions & answers

Question:	why is the inlet hose smaller
Answer:	although I haven't used for that purpose, I see now reason why it won't work. It is not thicker than motor oil and it has enough lubricant to keep the pump oiled.
Question:	Can I extract transmission fluid and then reverse flow to pump in transmission fluid
Answer:	Should have a black rubber plug, not the bottom center one, either use the rubber plug or your finger to plug the left hole, not the right one, and mines did the job, I know this is a few years too late but hopefully helps someone else. no need to cut anything. I just received and used the 5.3l version, gluck!
Question:	can this be used o a Kawasaki FS691 zero turn mower engine
Answer:	Current instructions say to rinse out reservoir, pump, adapter and tubes with "clean solvent or engine degreaser" and let dry thoroughly for storage. To empty reservoir remove main vacuum tube and pour liquid out that opening. Some users suggest also removing the threaded 'cap' on that opening as well, but that's not in the instructions.
Question:	Can you put gear oil into the differential using this
Answer:	I’m a mechanic and I have used mine on all types of fluids. Still works great and for the price it’s a sweet deal. If you take notice, every garage around the country has one of these. They are pretty common among mechanics. I’ve seen 4-5 different brands. I’m cheap so I bought this one after I ran over my last one..:( I have used mine on: diesel, gasoline, brake fluid, gear oil, coolant, all types of engine oil, and transmission fluid. They are usually more expensive. So I’m pleased with the value this has. It’s common for people to put DEF exhaust fluid into Diesed fuel tanks, so I suck out the fuel with this. (After I get most out by jumping the fuel pump)

Product features

Lotyes Quick Oil Change Pump, DC 12V 60W Oil Diesel Fluid Pump Extractor Transfer Pump & Tubes Kit for Car, Boat, Motorbike, Truck and Other Vehicles

Our oil extractor replaces manual operation and works by connecting the clamps to the vehicles 12V battery. It's high efficiency, rapid and saving effort.

• To pump motor oil properly, please start the vehicle to heat up the oil (to 40~60 degrees)about 15 minutes! Otherwise, the oil change pump may have low suction or jammed.
• WARNING: THIS PRODUCT CAN NOT USE TO EXTRACT WATER, GEARBOX OIL OR FLAMMABLE LIQUIDS(SUCH AS FUEL,PETROL,GASOLINE,etc).

Specifications:

• Motor Oil (40-60 degrees): Flow Rate: approx. 1L/min
• Diesel: Flow Rate: approx. 250L/Hour
• Inlet Hose Length: approx. 124.5cm/49''
• Inlet Hose Outer Diameter: 6mm/0.236''
• Inlet Hose Inner Diameter: 4mm/0.157''
• Outlet Hose Length: approx. 154cm/60''
• Outlet Hose Outer diameter: 12mm/0.472''
• Outlet Hose Inner Diameter: 10mm/0.39''
• Line Length: approx. 70cm/28''
• Package Weight: approx. 980g

Efficient Extraction Pump

It's high efficiency, rapid and saving effort.

Motor Oil (40-60 degrees):

Flow Rate: approx.1L/min

Diesel:

Flow Rate: approx.250L/Hour

Clean and Tidy

No more mess tools needed, the included hoses and hose clamps can prevent leakage during the extraction process.

Portable and Easy to Use

This new version pump comes with a handle, you can use the pump more conveniently.The switch at the top instead of the switch

at the bottom makes you change oil more

easily.

Versatility

You can change engine oil and diesel for cars, boat, motorbike, truck, RV and ATV and other vehicles.

Battery Clamps

• Red for Anode
• Black for Cathode

Oil Extractor

• Material: Plastic & Aluminium
• Color: Black/Yellow
• Input Voltage: DC 12V
• Wattage: 60W
• Current: 5A

Package Included

• 1 x Pump Extractor
• 1 x Inlet Hose
• 1 x Outlet Hose
• 2 x Hose Clamps
• 2 x Battery Clamps
• 1 x User Guide

• 【NOVEL SMALL PUMPS】portable and small oil pumps are needed by everyone, the simple operation does not need to spend too much time to practice, widely used in motorcycles, scooters, ships, quad bikes, trucks, ships, forklifts, Power generation machinery, tractors, lawnmowers and various machinery to change the oil.
• 【QUICK OIL CHANGE】12V 60W has enough power, you only need to clamp the conductive clip on the motor and open the switch to start it, so that you can complete the oil pumping work smoothly and effectively, replacing the traditional oil change method and reduce tedious workload (diesel flow: 1.5L / m, oil flow 0.3L / m).
• 【SAFE OPERATION】 Except for engine oil and diesel, the oil pump must not draw any flammable liquid or water to avoid accidents. Before use, be sure to heat the car engine to 104 ° F-140 ° F (40℃-60℃) about 15 minutes to avoid clogging the oil pump due to oil solidification.
• 【ACCESSORIES & PRECAUTIONS】The oil pump has 1 outlet hose, 1 inlet hose, 2 hose locks, and 2 battery clips. Please pay attention to the direction of import and export, positive and negative poles, and lock hose lock before use. The suction power of the micro-suction pump is limited. Please do not connect other extension tubes.
• 【MUTOCAR GUARANTEE SERVICE】we provide satisfactory and reliable customer service. If there is any problem with this oil pump, please contact customer service in time, and you will get a satisfactory result.

Product features

FIRST

Clip the conductive clips to the positive and negative poles of the motor, respectively.

THEN

insert the oil suction pipe into the engine oil or diesel, and then turn on the switch.

LAST

Oil enters the oil pump through the hose, and then drains from slow to fast.

Product description

This high efficient self-priming oil extractor pump is easy to use.

You just need to place the inlet/outlet hoses at the appropriate positions, connect the power clamps to the car battery and press the button.

The oil will simply draw out the motor through the oil dipstick bore.Simple On/Off Power Switch.

High flow rate: 3L/min flow rate for engine oil, 4L/m for diesel.

Portable and lightweight design that you can take anywhere.

To effectively and quickly transfer oil,Diesel,this Home Use Mini Type Electric Oil Liquid Transfer Pump is undoubtedly your best choice!

Though it is in small size, it functions greatly and powerfully.

Thanks to its sophisticated workmanship based on reliable materials, this pump is safe, durable and easy to operate.

Power-driven design makes it quite labor-saving and convenient than manual ones.

For safety purposes, take special care when handling inflammable goods or fuels.

You should avoid using low burning fluids such as gas, paraffin, petrol, etc and only work with fuels that have high burning points.

Wide range of applications, it can apply for your: Cars,Motorcycles,Vans,Quads,Truck,Forklift,Generator,Tractor,Scooter,Boat,and Other 12v Vehicles.

Note: NOT suitable for extracting: water (no lubrication of the pump), gearbox-oil (too viscous) and easy inflammable liquids (petrol, gasoline, etc.).

Specifications:

Voltage: 12V DC

Rated Power: 60W

Max Current: 5A

Color: Black & Yellow

You will get:All you see in the picture.

• 12V 60W Oil Extractor Pump ideal for Motorcycles,Vans,Cars,Quads,Truck,Boat,Forklift,Generator,Tractor,Scooter and Other Vehicles. Quick extract oil change pump,ATV Oil Change Pump,Engine Oil Change Pump,Scooter oil change pump,ATV oil pump,ATV oil transfer pump,RV oil change pump,Oil change pump for drill,Electric oil transfer pump.
• Oil Diese extractor pump's Voltage: DC12, Maximum current: 5A, Maximum power: 60W. Perfect for quick and easy oil changes that you can do at home.High efficient and safety.
• This 12V Oil Transfer Pump High Flow Rate: 3L/min flow rate for engine oil, 4L/m for diesel.12V Oil Transfer Pump AKA Oil Transfer Pump 12V,Oil Change Pump Extractor,Boat Oil Change Extractor Pump,Oil Change Extractor Pump,Transfer Pump Extractor,12V Transfer Pump Extractor,Electric Fluid Extractor,Fluid Extractor Pump,Car Fluid Extractor Pump,Electric Oil Pump,12V Diesel Transfer Pump. Note: NOT suitable for extracting: water (no lubrication of the pump), gearbox-oil (too viscous).
• This high efficient self-priming oil extractor pump is easy to pump various fluids and oils. You just need to place the inlet/outlet hoses at the appropriate positions, connect the power clamps to the car battery and press the button.Ideal Equipment for quick and clean oil-changes. The oil will simply draw out the motor through the oil dipstick bore. Simple On/Off Power Switch, easy to use.Portable and lightweight design that you can take anywhere.
• Note: Our pumps are designed to be a little workhorse. As with all 12V pumps however, we recommend a short break after 10 minutes continuous usage (should not exceed 30 minutes) to allow the unit to cool.

User questions & answers

Question:	How do you clean it if using it for different fluids
Answer:	Both http://www.amazon.com/dp/B0144MFPOA and http://www.amazon.com/dp/B00MPGRUNW got the same media, ie - incorporates a specially blended carbon/silver into the filter media. Both also comes as a complete assembled kit. However, the Gen2 includes a smart head with a built-in valve, so it gets replacement filters when needed (http://www.amazon.com/dp/B0144MFN92), while the 10K-DC must be replaced as a whole system.
Question:	Will this work for 2011 toyota prius and 2004 gmc envoy xuv
Answer:	Hey Mobolaji, yes - The Epic Water Filter removes greater than > 97.59% of lead from our testing. The filter has been tested in Flint, Michigan as well on lead, chromium 6, mercury, TTHMs, Trace Pharmaceuticals and much more.. These tests were done by an independent lab in California. If you get a chance, watch a Youtube Video on "Epic Water Filter vs Brita". Thanks! Joel
Question:	Will this work to extract enough trans fluid to add some Sea Foam
Answer:	We have a glass pitcher in product development right now

Product description

Our oil and fluid extractor pump makes it quick, easy and clean to pump oil and other automotive fluids out of engines, transmissions, radiators and more. Package includes a 1.6 liter tank, 52 and 53 inch hose, suction lock, hand pump and funnel. Simply assemble, snake the extractor tube into the fluid and pump the handle. 1.6 liter capacity makes it ideal for most passenger vehicles on the road today. Also works great on boats, ATVs, farm equipment, lawn equipment, household plumbing and more. Lightweight, compact, easy to assemble and use.

• Extracts and transfers almost any fluid
• Perfect for draining motor oil, transmission fluid, coolant, brake fluid, gear lube, etc
• Includes 1.6 liter tank, 52 and 53 inch hose, suction lock, hand pump and funnel
• Ideal for automotive vehicles, watercraft, ATV/motorcycles, farm equipment, lawn equipment, household
• Securely stores used fluid for transport or disposal

User questions & answers

Question:	Will this work to pump the oil out of a jeef grand Cherokee i strip the drain plug
Answer:	No problem. The pump works for kinds of vehicles.Such as car ,boat, truck ,motor and so on. You can contact us by email if need any help.Thank you for your question. Best wishes, SICOTOOL SERVICE TEAM
Question:	What is the inner diameter of the extraction tank opening
Answer:	Hello, Before changing the oil, please start the engine and heat it to 40°C-60°C (104-140°F)---Warm but not too hot. When the temperature is reached, turn off the engine. Please follow the instructions to operate it . If has any questions ,please let us know by email best wishes, SICOTOOL SERVICE TEAM
Question:	are the tubes that come with this kid a small enough to fit down the oil dipstick
Answer:	You could flush with washing detergent and expend some fresh fluid to purge the lines and pump. And directing the fulid into a separate container after the lines and pump are purged. After done, you can use it to pump other oil. Please contact us if need any help. Best wishes, SICOTOOL SERVICE TEAM
Question:	Does this pump work well for removing power steering fluid
Answer:	Home Depot

• Simply pump operation for easily remove the liquid.
• Transparent hose allows visual inspection of fluid extraction. Extra hose placement for easy to storage. Durable metal pedal to fix the tank when operating.
• Can be used to extract engine oil from,brake fluid and lubricant oil from machine and car,water from fish tank and more.
• Specification: Item Size: 68*24*22cm，Tank Capacity:7L，Working Pressure: 70-170PSI
• Fit for most fluid extraction applications.

User questions & answers

Question:	Including dip sticks tube
Answer:	Yes, it is alright All there
Question:	How do you clean this device
Answer:	Depending on what I use it use but soap and hot water usually
Question:	Why is there no cap for the tank i recieved this one new with out a tank cap for transporting
Answer:	The extractor is not designed for transporting. The handy pour spout makes it easy to pour the oil back into the empty new oil containers for recycling without spilling.
Question:	Is there a fix it kit for mighty Vac 7201? I bought one here about 2 years ago and it kit recently. It will suck but not pump. thanx
Answer:	I dont know if 9ts supposed to pump