8 best grease gun pressure
The pressure in a grease gun refers to the force or pressure applied to push grease out of the gun's nozzle and into the desired lubrication point. Grease guns are commonly used in automotive, industrial, and other mechanical applications to deliver lubricating grease to moving parts, bearings, and other components to reduce friction and wear.
There are typically two common types of grease guns with different pressure mechanisms:
Manual Grease Guns: These grease guns rely on the manual force applied by the user to build up pressure within the gun. To use a manual grease gun, you load it with grease, then pump the handle or lever.This pumping action builds pressure, forcing the grease through the nozzle onto the lubrication point. The pressure generated in manual grease guns can vary based on the user's strength and the design of the gun, but it is typically sufficient for many automotive and small equipment lubrication needs.
Pneumatic or Air-Powered Grease Guns: Pneumatic grease guns are powered by compressed air. They use a pneumatic mechanism to build up pressure and force grease out of the nozzle. These guns can deliver higher pressures than manual grease guns and are commonly used in industrial settings where large volumes of lubrication are required.
The pressure generated by a grease gun is measured in pounds per square inch (psi) or bar. The specific pressure required depends on the application and the type of grease being used. Some equipment and machinery may require higher pressures to effectively deliver grease to hard-to-reach or heavily loaded lubrication points.
It's essential to follow manufacturer guidelines and recommendations when using a grease gun to ensure that you are applying the correct pressure and type of grease for the specific application. Over-greasing or using excessive pressure can lead to equipment damage, while insufficient pressure may not provide adequate lubrication.
Below you can find our editor's choice of the best grease gun pressure on the marketProduct description
- Develops pressure up to 15,000 psi
- Long, solid lever for increased leverage over standard length levers
- Delivers 1 oz. of grease, sealant, or similarly viscous fluid per 24 strokes
- 12 oz. cylinder capacity
- All steel construction and die cast iron head for durability, and zinc plated for resistance to corrosion
Product description
- Overall length 10 Ft.
- Coupling specification: 1/2 In.-27 NS Taper (f) x 1/2 In.-27 Taper (f)
- Hose ID 1/4 In.
- Working pressure 8,000 PSI
- Burst pressure 20,000 PSI
User questions & answers
Question: | Does this item take J Sticks |
Answer: | That was my question/ did not buy The one I bought was in a plastic jar. It did not say acne. Not same packaging |
Product description
For more than a century, professionals have chosen the Lincoln brand for their lubrication equipment needs. We are dedicated to listening to our customers and their requirements. This dedication, combined with our understanding of the challenges of their daily work, led to the development of the problem-solving PowerLuber–the first battery-operated grease gun on the market! Recognized as leading the industry, the combination of SKF and Lincoln lubrication technology continues to develop innovative solutions. Its high-torque motor develops up to 10, 000 psi to bust through the toughest blockages. Each generation of the PowerLuber family has delivered exceptional performance and dependability. The newest addition to the line, the 20-volt, lithium-ion PowerLuber, is no exception. This robust tool has been engineered for maximum reliability at a competitive price. It's two-speed transmission delivers 3. 5 oz. per min. in the low-output position and 10 oz. per min. in the high-output position. At every farm, construction site, automobile repair shop and industrial plant, maintenance professionals need high quality lubrication equipment and pumping products. Lincoln offers everything you need for lubrication. Our general-purpose tools and heavy-duty pumps, hose reels, meters and controls, used fluid systems and hand-held lubrication products are the best in the industry. LINCOLN – THE BRAND THE PROS DEMAND.
- Two-speed transmission delivers 3. 5 oz/min in low-output position and 10 oz/min in high-output position
- LED indicators identify loss of prime, empty cartridge or blocked fittings
- Sturdy 3-point base allows gun to stay upright to keep out contaminates
- Includes 2 extra grease couplers and a battery energy gauge to identify battery level
- High-torque motor develops up to 10, 000 psi pressure
User questions & answers
Question: | Does it come with a Carrying hard case |
Answer: | Yea |
Product features
Additional Information
Lincoln has introduced its PowerLuber series 1880 grease gun for multiple lubrication applications. Featuring a redesigned, high-torque powerhead driven by an efficient, 20-volt, lithium-ion battery, the two-speed motor delivers grease at up to 10,000 psi (690 bar) in both high- and low-output settings. The rugged grease gun’s new three-point base keeps the tool upright and stable for easy handling without being bulky. This feature allows access to tight areas and reduces operator fatigue when lubricating simple-to-reach fittings.
Product description
Lithium battery high-pressure grease gun: suitable for lubrication occasions in construction, engineering machinery, electric power, mining, automobile repair workshops, grease change centers, shipyards, and other industries
Product material: aluminum alloy
Battery voltage: 21V
Maximum working pressure: 10000psi
Oil output per battery: 3200g
Oil output per minute: 130g
Transparent tube oil storage capacity: 14 oz
Features:
1. Stable grease injection: stable exhaust to ensure smooth grease injection
2. Strong power: high grease injection pressure, continuous balance, fast in place
3. Flexible and efficient use: grease can be filled wherever the nozzle can reach
4. Convenient to carry: It can be carried with the car, saving time and effort, convenient and fast
Configuration: Grease gun*1, special suction pan*1, scraper*1, wrench*3, hard tube*1, charger*1, lithium battery*2, multi-purpose aluminum connecting sleeve*1, hose *1, grease gun tips *4
- 👍 SUPERPOWER: Grease guns provide pressure up to 10000PSI, step-less switch, adjust the pressure according to the speed of the button, the faster the speed, the greater the pressure. The more oil output
- 💡 EXCELLENT PERFORMANCE: 20-volt cordless grease gun with automatic exhaust function to avoid oil pipe blockage, with LED light, tools grease gun can complete the work at night
- 🔋 WORK EFFICIENTLY AND LASTINGLY: Get more done in less time with the combination of operating pressure and run-time provided by powerful motor and Lithium-ion battery technologies
- ✔️ MULTIFUNCTIONAL AND DUAL-PURPOSE: both barreled oil and cartridge lubricants can be used, and each battery grease gun is subjected to a factory test, which makes the oil easy and convenient to use
- 🚗 A VARIETY OF EQUIPMENT CAN BE APPLIED: ships, automobiles, mechanical equipment, agricultural machinery, engineering vehicles can all be oiled and maintained with a powered grease gun
- The green fashion grease pump is driven by compressed air, 0.85 l/min, 30 liters (7.5 gallon) capacity
- The air operated grease pump features 50:1 pressure ratio. Input pressure: 0.6-0.8 Mpa. Output pressure: 30-40 Mpa
- The kit of the grease pump includes: 1 x spray gun with 4 m (13.12 ft) grease hose, 1 x product manual
- Equipped with an inverted U-shape handle and four rolling wheels, the air operated grease pump is easy to handle and transport, features safety and reliability, low energy consumption, accurate working pressure, simple operation and high efficiency
- The pneumatic grease pump is an essential professional equipment of the mechanization of oil injection. It is widely applicable to automobile industry, shipbuilding industry, engineering machinery, chemical industry, etc
User questions & answers
Question: | Is it continuous flow |
Answer: | Yes it was sealed and the best masque ever for oily combo skin. It also doesnt dry out your skin. I totally recommend this product. It is the real deal. |
Question: | Does it screw into a 55 gallon drum of grease |
Answer: | I’ve had mine for several years and it’s just fine. I keep it in the fridge along with all my eminence masks. The creamy ones especially need to stay in the fridge if you’re going to keep them longer than a few months. |
Question: | Is the air input thread a United States standard pipe thread |
Answer: | it should last for 3 years. Its organic- you will know when it expired- just like expired food it will smell bad |
Question: | Country of manufactory of grease air pump |
Answer: | I would not recommend steam this peel is very hot once applied to the skin. It's so intense I put the fan in my face for 10 minutes for a little relief. It's worth every it. I am 42 and have suffered from acne my whole life. I apply this mask once a week and have seen great results. People have actually been saying how great my skin looks. |
Product features
360 ° Rotatable Gun
The sturdy & durable air operated grease gun has anti-rust and anti-corrosion features. The biggest advantage lies in 360 ° all-round rotation, which satisfies multi-scenario applications.
30L Large Oil Barrel
30L/7.5 gallon grease bucket, made of high-quality alloy, has high hardness, good toughness, sturdiness & durability. Rubber seal piston isolates pollution and keeps the oil clean.
Precision Pressure Gauge
The pressure gauge, precision-manufactured, owns a clear scale to reflect the pressure in real-time. The pressure limiting valve enables to adjust the pressure through actual data.
Premium Alloy Material
The integrated structure with a streamlined design ensures its exquisite appearance. The main advantages of alloy are reflected in high hardness, good toughness, sturdiness, and durability, which extends the service life of the grease bucket pump.
Labor-saving Caster
The caster device greatly facilitates movement and transportation of the air operated grease pump, time-saving, and labor-saving. The thickened base further increases the stability of the machine.
Wide Application
The pneumatic grease pump is the professional equipment of the oil injection. Widely applicable to the automobile industry, shipbuilding industry, engineering machinery, chemical industry, etc.
Product description
Milton (S-3101) Pistol Grease Gun - High Pressure, High Volume
Milton’s S-3101 Pistol Grease Gun and 18"" High Pressure Hose Extension air bundle kit offers a handy and convenient solution for home garages to professional workshops, automotive, industrial, farming/agricultural, and other application needs. With an 18-inch high pressure grease gun hose crafted for those hard-to-reach spots combined with a bonus coupler, this tool allows you to check off projects quickly and efficiently. Fill this grease gun with either standard 14-ounce grease cartridges, bulk fill or dispenser/filler pumps. Maximum pressure of 7,000 PSI.
User questions & answers
Question: | I have loaded it correctly, yet I cannot get the grease to come out? instructions are unclear |
Answer: | If you look at where handle meets tube you will see that there is a slot allowing pin to move up in handle and allowing full strokes, pushing grease out |
Question: | Does it have the standard 1/8" npt hose connection? i want to attach a longer hose than what it comes with |
Answer: | not sure what "standard 1/8" npt hose connection" is, but the hose has the same threaded end that screws into the body as my other grease guns, and the end that goes over the zirk nipple unscrews as well. Seems to be as high a quality as the more expensive guns, though I could not get it to work with the replaceable tube of grease, had to manual fill. There must be a way of doing it, just could not get the plastic / rubber seal part to fit inside the tube of grease. I followed the instructions, no joy |
Question: | Does coupler have 4 jaws or |
Answer: | 4 jaws |
Question: | Where is it made |
Answer: | The Milton box that in came in says "Made in India".I've only used it twice. It does seem to be a decent quality grease gun. |
Question: | where is it made |
Answer: | This is a quality, name brand product from Plews. However it is made in China. |
Product features
Milton Lever Grease Gun
Variable stroke lever grease guns make it easier to pump grease in tight areas with short strokes. Fill grease gun with either standard 14 ounce grease cartridges, bulk fill or filler pump. Rolled thread on barrel provide easy threading. Maximum pressure of 10,000 PSI.
Milton Pistol Grease Gun
Adjustable stroke pistol grease gun can be used for either high volume or high pressure by simply moving the handle position. Fill grease gun with either standard 14 ounce grease cartridges, bulk fill or filler pump. The pistol grease gun allows for one handed operation. For use as both a high volume and a high pressure grease gun. Maximum pressure of 7,000 PSI.
Milton Pistol Grease Gun
Mini pistol grease gun has dual discharge ports with the convenience one handed operation. Simply fill grease gun with standard 3 ounce grease cartridges. Features two ports - front and top for accessing grease fittings just about anywhere.
Milton Pneumatic Grease Gun
Continuous flow pneumatic grease gun eliminates the need of pumping a standard greaser gun, making your task a whole lot easier. Pneumatic grease gun delivers a continuous flow of grease of up to 14 ounces per minute. Fill this aluminum grease gun with either standard 14 ounce grease cartridges, bulk fill or filler pump. Heavy duty aluminum die cast head with internal bore is perfect for rapid action.
Milton 120 Amp Battery Tester
This battery, starter and charging system tester can test up to 120 amps at 10 volts. This tester has a chrome finish and includes storage on the side for cables as well as a 12 second cut off switch. With its heavy duty battery clips and 4 gage wire, this battery tester is perfect for cars and trucks.
Product description
Compatible with: DCGG570B Type 1, DCGG570K Type 1, DCGG571B Type 1, DCGG571M1 Type 1
- Genuine, OEM Dewalt Replacement Part
- Dewalt replacement pressure valve kit, part number N365761
- Compatible with: DCGG570B Type 1, DCGG570K Type 1, DCGG571B Type 1, DCGG571M1 Type 1
Product description
Structure: Designed with 1/8" NPT threads, this high pressure grease gun hose has a 0.425" outer diameter for effective lubrication and performance. Material: Constructed with a polyamide inner tube with polyurethane sheathing and zinc plated end connections. Pressure: Offering a continuous flow with a pressed trigger, giving you a working pressure of 5,800 PSI and a 13,775 PSI burst.
- Package Dimensions: 19 L x 3 H x 2 W (inches)
- Package Weight : 1 pounds
- Country of Origin : United States
- Fit type: Vehicle Specific
User questions & answers
Question: | Is this still made in the usa? reviews and dates make me think it used to be but isn't anymore |
Answer: | Some things can be controlled because the product must have a series of information but the important thing is especially Where you but it and i trust amazon |
Question: | Is this grease gun really made in the usa? and is there any proof |
Answer: | I have sensitive skin and can only use it once a week. I don't think it would be good for redness. |
Latest Reviews
View all
Eye Cream Cliniques
- Updated: 20.06.2023
- Read reviews

Couples Apparel Friend Matching Gifts
- Updated: 12.03.2023
- Read reviews

Hp Game Keyboards
- Updated: 29.01.2023
- Read reviews

Case Logic Iphone 6 Plus Cases
- Updated: 09.03.2023
- Read reviews

Rca Cable Modems
- Updated: 02.04.2023
- Read reviews