10 best gi gas cans

Product description

GAS CAN NOT INCLUDED.



HERE’S WHAT YOU GET:

- 1 ( One ) Brand New 5gal Jerry Can Blitz Style Metal Flexible Spout w/ Metal Screen including Nitrile Gasket and Spout Cap



- Fits ONLY Blitz or Military issue 5 Gallon GAS Metal Cans manufactured prior to or around 2009.



- Fits into 2 ¼ inch (2.25”) width threaded openings and measures approximately 13 1/2 (13.50") inches Long.



- Brand New Heavy Duty SCREW IN THREAD TYPE Flexible Spout with a metal filter screen at the end, which might be considered a flame arrestor but it’s just a screen that helps to keep dirt and debris from entering your vehicle or equipment and machines fuel tanks.



- Fits unleaded GAS fuel tanks.



NOTE:

This spout will NOT fit the newer NATO Cans that were manufactured from around 2009 to the present. EPA regulations have made manufacturers change the size of their can and the diameter of the hole is slightly larger.



Gas Can, Measuring Tape and Caliper are Not Included.

• FITS ON YOUR BLITZ USMC 5 GALLON METAL GAS CAN: The Flex Jerrycan Spout fits a 2 1/4 width threaded opening and has a 12 1/2 inch Steel Flexible Spout with a filter screen on end.
• WITH FILTER SCREEN: The Filter Screen on end is a great added part to this spout as it helps to keep small debris from entering your vehicle or equipments fuel tank.
• BLITZ VINTAGE STYLE GAS SPOUT: These Replacement Parts are hard to find and considered obsolete due to New Government Regulations. Buy a few to keep on hand to Save your old gas can from the landfill.
• GAS CANS & CALIPER NOT INCLUDED: Please double check your requirements prior to purchase to ensure getting the right part the 1st time. Not all gas can parts are interchangeable between brands. These parts do not fit any other can other than what has been specified above.
• NOTE: This spout will NOT fit the newer NATO Cans that were manufactured from around 2009 to the present. EPA regulations have made manufacturers change the size of their can and the diameter of the hole is slightly larger.

User questions & answers

Question:	is this made in the USA
Answer:	Sorry, don't know! Amazon site should say under details! The ones like that I purchased rusted quickly and a few broke off at can top. Good luck!
Question:	What is the diameter of the screw in part? is it 2 inch NPT thread
Answer:	yes
Question:	where to buy the can this fits...part number? don't just sell stuff and leave usnot knowing
Answer:	Not sure where to buy cans. I purchased 10 can years ago and just needed new spouts! Try google or search off-road items, and possibly survival equipment/gear suppliers. I'm sure someone is making /selling them somewhere.
Question:	Does this spout fit in modern cars with the smaller diameter fill hole
Answer:	Most likely not I'd carry a funnel

Product description

Brand New, Never Used, No Retail Package. Please note: **Gas Can & Caliper Not Included** ** 2 (two) AFTERMARKET JERRY CAN METAL FLEXIBLE GAS SPOUTS including NEW & IMPROVED thick Rubber Nitirle Gasket (not the ribbed style that others have, ours are guaranteed industrial style). Fits on your Blitz USMC 5 gallon Metal Gas Can. The Flex Jerrycan Spout fits a 2-1/4 inch width threaded opening and has a 12 1/2 inch Steel Flexible Spout with a filter screen on end. The Filter Screen on end is a great added part to this spout as it helps to keep small debris from entering your vehicle or equipments fuel tank. IMPORTANT NOTE: This spout will NOT fit the newer NATO Cans that were manufactured from around 2009 to the present. EPA regulations have made manufacturers change the size of their can and the diameter of the hole is slightly larger. Please double check your requirements prior to purchase to ensure getting the right part the 1st time. Not all gas can parts are interchangeable between brands. These parts do not fit any other can other than what has been specifed above. Gas Cans, Spouts & Caliper not included. ★ Aftermarket BLITZ Vintage Style Gas Spouts. These Replacement Parts are hard to find and considered obsolete due to New Government Regulations. Buy a few to keep on hand to Save your old gas can from the landfill ★ **Gas Can & Caliper Not Included**

• 2 New Aftermarket Jerry Can Spouts for Blitz 5 Gallon Metal Cans with NEW & IMPROVED Rubber Nitrile Spout Gasket (not ribbed style).
• Excellent Replacement Spout for some civilian & military cans with 2 1/4" threaded opening (please see picture)
• IMPORTANT NOTE: This spout will NOT fit the newer NATO Cans that were manufactured from around 2009 to the present.
• 12-1/2" Steel Flexible Spout with slip on Black Spout Cap and Metal Filter screen on tip to keep dirt & debris out of your expensive equipment.
• Buy with confidence, everything we sell we use for our landscaping business, so we know "it works".

User questions & answers

Question:	Are these large diameter filler tubes
Answer:	No, these are not the high flow Jerry Spouts. The approx OD diameter of the tube is 0.80" and the ID is approx 0.65"
Question:	Can you show the threads on the gas can side of this device
Answer:	What type of gas can do you have?
Question:	Will this fit on the old Usmc gas can
Answer:	I put it on an army surplus Jerry can and it is great. A whole lot less spillage than before.
Question:	Will this fit a Blitz 5 gallon metal can? The opening is approximately 2.5 inches
Answer:	It should. It has 2" pipe threads. The thread size for the hole on a USGI, or Blitz, or MFC, or standard 15 gallon drum, or standard 30 gallon drum, or standard 55 gallon drum is 2" NPT. 2" pipe is designated by the nominal inside deminsions of the pipe which would make the opening diameter of the can a little less than 2.5"
Question:	What tipe of material is cap
Answer:	It’s plastic, , if you use the military type can you’ll need to remove the seal to get it screw on tight

Product description

Here's what you get:"3 New Jerrycan Cap/Can Gaskets only"Measures Approximately3-1/4" OD 2-1/4" ID 1/8" THICKFits Military Jerrycans Gerry Cans USMC 20L Gas Cap Gaskets specially formulated to resist Gasoline with Ethanol additives. Fits some Jerry Cans produced from 1941 through 2009. Check to see if it matches your Screw Cap Lid.REF: M38 M38A1 M170 M38A1C M35 M37 M43 M59 M715 M725 M151 M151A1 M151A1C M718 M718A1 M151A2 GAS CAN 5GAL 5 GALLON 20L JERRY CAN GERRY CAN USMC80 USMC79 ETC LIDS Gas Cans, Gas Caps & Caliper are not included These Gaskets of this Quality are hard to find.

• 3-Pack Rubber Nitrile Gaskets only for Jerry Can Cap
• High Quality Replacement Jerrycan Cap Gaskets "fix your can man"

User questions & answers

Question:	do these properly fit the scepter mfc 20l/5g military gas fuel cans
Answer:	We have several 5 gallon metal Jerry cans, and they fit perfect! No more fried brain cells!
Question:	Looking for the old flip top jerry water can gaskets. gasket fits into flip top lid. they are not the same size as the gas cans. thanks
Answer:	Right. They are not the same size. I don't remember where I got mine from. Surplus store maybe???
Question:	will you combine shipping on 2 sets of 3 gaskets
Answer:	Yes, of course, please put two in your cart and checkout. You will see the combined shipping costs. Mahalo.

Product description

Gas Can Not Included. Here's what you get: "3 ( Three ) Brand New 5gal Jerry Can Blitz Style Metal Flexible Spout w/ Metal Screen including Nitrile Gasket and Spout Cap" Fits ONLY Blitz or Military issue 5 Gallon GAS Metal Cans manufactured prior to or around 2009. Fits into 2-¼ inch (2.25") Width Threaded Openings and measures approximately 13-1/2 inch (13.50") Long. Brand New Heavy Duty SCREW IN THREAD TYPE Flexible Spout with a metal filter screen at the end, which might be considered a flame arrestor but it's just a screen that helps to keep dirt and debris from entering your vehicle or equipment and machines fuel tanks. Fits unleaded GAS fuel tanks. Note: This spout will NOT fit the newer NATO Cans that were manufactured from around 2009 to the present. EPA regulations have made manufacturers change the size of their can and the diameter of the hole is slightly larger. Gas Can, Measuring Tape and Caliper are Not Included.

• 2 New Aftermarket Jerry Can Spouts for Blitz 5 Gallon Metal Cans w/ Rubber Spout Gasket
• Excellent replacement for your old worn out spout
• IMPORTANT NOTE: This spout will NOT fit the newer NATO Cans that were manufactured from around 2009 to the present.
• Jerrycan Spout fits a 2 1/4 width threaded opening and has a 12 1/2 inch Steel Flexible Spout with a filter screen on end.

Product description

Classic Metal Jerry gas can fitted with Midwest Can Company's spill-proof spout that exceeds California Air Resource Board (CARB) and EPA requirements for portable fuel containers.

• Classic metal jerry gas can
• Fitted with Midwest Can company's spill-proof spout
• Exceeds California Air Resource Board (CARB) and EPA requirements for portable fuel containers
• Holds 5 gallons of gas

User questions & answers

Question:	Aside from the caps, are these solid cans
Answer:	No you can not , or at least not very well . I just got mine today and tried , I used another sharpeners tool for planer blades , delta sharpening center 23-710 , The wheel to the Delta is to soft and can not find harder wheel . The wheel to the Wen is fine but I also just returned it because a , it sounds like , a plastic gear broke after half an hour of use ! well cheap . So it is possible but the accessory cost more than the machine , there is an accessory you can buy ...but it does not look like it would work well at all , remember you have to keep equal pressure to sharpen blades . hope this helps
Question:	Can these cans hold 10-15 lbs of pressure
Answer:	It is 110V.
Question:	What gray replace my caps is the guy talking about
Answer:	The issue that I've had with the Tormek truing tool is that if you put the notch on the tool against the guide bar, like you're supposed to, the diamond point doesn't make it all the way to the outside of the wheel. I have to place the bar in the notch to align it, than pull it out about half an inch.
Question:	Do I just put gas in it w/o any cleaning and use it in the car
Answer:	Not totally sure but I will say this: The stone side is definitely a wet stone system, you wouldn't want to use it without the water. The other side, the leather wheel, is dry. You do put compound on it but it is a "dry" buffing system.

Product description

Replacement Nozzle for G.I. Jerry Can - screw on nozzle, 13" nozzle length, 2-1/4" thread base with gasket, spout end has a screen. IMPORTED

User questions & answers

Question:	What is the can opening sizing this will fit? Aprox. 1.5", 2.25", 2.75" or other
Answer:	These were the wrong nozzles, my can isn't military. I just measured the threads and they measure around 2.25.
Question:	How ruged are these? How thick is the sheet metel they are made out of, will it hold up to abuse, mild or other wise
Answer:	This is a relatively light duty nozzle, unlike the military version. The spout is approx. 1/2" and the rubber gasket doesn't seal very well...

Product description

This is the best companion spout to your jerry can. This spout is compatible with Wavian cans and the rapid pour internal air vent provides quick pouring without air buildup and glugging. Durable metal build on the spout gives you added flexibility and the red tip provides a nice accent to your jerry can. This spout is great for olive drab colored jerry cans nd the sleek form factor simply makes your can look amazing. This spout is a much needed upgrade from the standard spout that comes with your jerry can and it improves the performance from the standard jerry can spout. NATO style non-carb jerry cans are compatible with this jerry can spout. The performance and sleek design makes this a worthwhile upgrade from your original spout. Size: 9 inches long spout Flex: Metal flexible Tip Color: Olive Drab (Green) Base Color: Olive Drab (Green) Compatibility: Wavian and other NATO style non-CARB jerry cans Compatible Cans Include (but not limited to): Wavian 3013, 3024, 3023, 3025, 3014, 3008, 3009, 3010, 3011 Ensure that your purchase is made through authorized retailers to avoid imitations.

• The Original Wavian metal spout for Wavian cans
• Rapid pour internal air vent for extremely fast pouring without glugging.
• Fits all Wavian and other NATO-style non-CARB jerry cans.
• Metal spout provides durability and support and it's more flexible to manuever
• Toolfetch is the authorized retailer of Wavian

User questions & answers

Question:	Will the nozzle tip fit in a fuel port on a car or truck
Answer:	Yes, this is EXACTLY the same same Wavian can made by the same factory to the exact same specifications.
Question:	what is the length of the tube portion
Answer:	Seems to be the same. It just doesn't have the pouring spout. I bought one that had one and the spout from it fits this one. Hope this helps.
Question:	There is a hole in the top of the spout base, it looks like a vent hole, when I used this for the first time, fuel leaked from it, why? Is it a defect
Answer:	I'm not sure the Wavian's have heard of the carb act. The green ones I've gotten lately look just like a NATO can inside with petrol stamped on them and a fire symbol stamped also. Nothing says "not for gasoline" that I've found.
Question:	I tried a new nozzle from one of the wavian style cans and it wouldn't fit on my older nato can due to the placement of the vent tube. will this work
Answer:	I have not ran into that issue but when tipped it does not leak. The seals are very tight.

Product description

These Smittybilt Jerry Can holders allow you to carry an extra 5 gallon gas can and mount it to your spare tire. They feature full metal construction with a lockable top strap and have a powdercoated finish for maximum durability. Use one of these Smittybilt Jerry Can holders to add an extra container and make your off-road adventures last even longer. Jerry Gas Can Holder holds a 5 gallon can.

• Holds 5 Gallon Steel Jerry Can
• Full metal construction for rugged use and abuse
• Store extra gas for emergency or increase your range
• Lockable top strap to prevent theft
• Universal mounting options - product dimension - 14 x 7 x 18 1/2 inches.
• Powder coated for long lasting corrosion resistance

User questions & answers

Question:	what are the inside dimensions of this can holder (width, length and height
Answer:	Sorry, previous answer was "outside" dimensions..... Inside measurements are just over 7 3/8" by just under 14".
Question:	Is the bottom of this holder a solid bottom or just a lip that the can would sit on? If it's just a lip, what is the approximate width of the lip
Answer:	The bottom is NOT solid. There may be a small lip around the side, but I do not remember because the sidecar that this is mounted to is getting some repairs. But I do remember that the main support for the tank is two cross flat straps across the width of the holder that are apaced about a third way into the hoolder from each end. I use tyhe holder on an offroad idecar rig that get jostled around real well and the unit has held up. But I made two support bars that go directly under the staps to hold the entire holder more securly since that is alot of weight. My mai9n criticism is that the rubbger bumpers that are intended to isolate thge jerry an somewhat are mickey mouse affairs that will all fall off eventually. I had to make other bumpers out of foam, which works okay. Even with this problem, it is still a good buy and works well for me.
Question:	what hardware is suggested to install in truck bed? any specific bolts
Answer:	I used 5/16 1 1/4 bolt (1/2 open end ratchet) and locking nuts using bottom mounts on custom platform on rear of motor home and custom mounted and manufactured channel steel with bracket bolted on spare tire on a Jeep Wrangler. BTW I raped sections of tire hose held on with zip strips for padding on Gerry Cans.
Question:	The picture shows it mounted to an fj cruiser. thats what i have. is there a kit for that
Answer:	Im not certain of your vehicle without seeing it. When it comes down to it, its your personal preference on mounting. I bought a Smittybuilt mount and mounted in bed of my truck. They make several Jerry Can mounts and ive seen them on spare tire lugs. Best bet is research Jerry can mounts and find what best suits your needs.

Product features

Smittybilt 2798 Jerry Gas Can Holder

About Smittybilt

Brand Overview:

Few brands in the off-road industry can match the legacy of Smittybilt. For over 50 years Smittybilt has been the brand customers trust to outfit their Jeeps with reliable, functional accessories. All Smittybilt products are created by off-road enthusiasts who recognize a need for something better than what has been previously available. This deep heritage of innovation continues today with over two thousand unique products for not only Jeeps, but trucks and SUVs as well.

In addition to widely copied items like the Sure Step, Smittybilt is best known for their distinctive bumpers and armor. However, their expansive line extends well beyond Jeep accessories and includes trail equipment, winches, soft goods and much more.

Backed by the superior customer service and the best warranty in the industry, Smittybilt service doesn’t end with your purchase. Smittybilt, Get the Original.

Advantage Warranty:

For more than 50 years Smittybilt has been the brand customers trust to outfit their Jeeps with reliable, functional accessories. And because our products are created by off-road enthusiasts, they are made to withstand the roughest, toughest treatment that can be dished out.

That is why Smittybilt's M-1 truck line, the SRC/XRC lines of rock crawling accessories and the XRC/X20 winch families are backed by the Smittybilt Advantage Warranty – one of the strongest warranties available in the off-road market.

This warranty features limited lifetime coverage for all steel-based products, such as bumpers, sides, steps and armor, from manufacturer defects. It also offers a five-year warranty on our signature two-stage powdercoat finish, which is available in textured, satin or gloss black.

For Smittybilt's line of waterproof winches, enjoy peace of mind with a lifetime mechanical warranty, as well as an extended electrical warranty (five years for X20 and three years for XRC models).

Smittybilt offers these extended warranties because they stand behind their products and want their customers to enjoy the freedom of off-roading without the worry and limits of fragile equipment. Welcome to the new Smittybilt – where history and experience lead to innovation and quality.

Product description

Our best-selling spout for NATO-style jerrycans!

If you need a little more reachand flex in your jerry can spout, we have the nozzle for you.

This ultra flex long-nose spout by VALPROhas a 9-inch long flexible accordion metal pouring tube that allows you to bend it any way you would like. It is perfect for emptying every last drop.It also includes therapid pour internal air vent, so you can empty your can in seconds.

Built durable in the Latvian NATO manufacturing facility and for use with VALPRO and WavianEuropean military-spec NATO jerry cans-NATO military quality!

Inolive drab green finish.

This spout is commonly sold under part numbers: GJC007,747.00.00 orGE1002.

Tip - Proper Clamping to Prevent Leaks:To prevent leakage, ensure you carefully seat and forcefully clamp down the spout on the can during the first few times of use.We'vehad reports of leaks that typically are the result of the spout not being fully clamped down or not seated properly on the can lip when clamped. The spout clamp pin can be a bit sticky when used the first few times (due to the paint clear coat on the edges.) Carefully seating the seal and forcefully clamping spout during the first few times of use will ensure the rubber seal on the spout gets the proper lip impressionfootprint. Also, the clamp pin will be easier to clamp down after first few times of use and with proper seal lip impression footprint.

• FIT AND DURABILITY - Our best-selling spout fits VALPRO and Wavian EuropeanNATO-style jerry cans. Built durable by VALPRO in official NATO Latvian factory- NATO military quality!
• SPOUT FEATURES - Ultra-flex 9-inch long flexible accordion metal spout allows more reach and flex to ensure you get every last drop.Olive Drab Green Finish
• SMOOTH POURING - Rapid pour internal air vent for extremely fast pouring without glugging. Spend less time pouring, and more time of what you had planned.
• PRO TIP - If you are seeing leaks, a mis-seated or not-fully-secured spout clamp is often theproblem. To prevent this, be sure to carefully seat andclamp down the spout. For more info read below.

User questions & answers

Question:	Is the black plastic part with screws for attaching the spout to the jerry can handle when not being used
Answer:	Yes the plastic piece with screws attach to the Jerry can. That piece is normally riveted to the Jerry can.
Question:	Does this match the modern generation, plastic nato jerry cans
Answer:	No. It fits only steel cans based on the WWII German/British design.
Question:	What size is the tip? .75” or
Answer:	it is .75" at the tip
Question:	Does this work on my old army can with a round threaded hole? or do you sell one that does
Answer:	I do not sell gas cans or spouts. This one is for the original Wehrmachtkanister / benzinkanistrt WWII German & British jerrycans. It will also fit currently-made "Eurocans" and "Chinacans" although, due to manufacturing variances, with varying degrees of success. What you need is basically a modified threaded can cap for the American military, or commercial copies, of the ironically-named "Blitz" cans.
Question:	Plastic or metal
Answer:	Hi, this Jerry can spout has a threaded metal base and a plastic nozzle. SKU RT26013 is the intended Spout for the RT26009 and RT26010 Jerry Cans.
Question:	Will this fit a kidde 2 gal gas can with 1.5 “ cap. Need to replace old plastic funnel
Answer:	no, this unit fits rt off road cans only
Question:	What's the length of spout and dia.as well for the threaded part
Answer:	Total length: 13 7/8". Thread diameter: 1 3/4"

Product description

Replacement Spout and Vent Kit

• Fits most plastic cans
• 9" Flexible spout provides easy pour at any angle
• Push - in vent cap for faster and safer emptying
• Includes: 9" flexible spout, "O" ring gasket and filter screen, base caps, push-in vent cap

User questions & answers

Question:	How is the breather installed
Answer:	You have to drill a hole in the gas can and then push the breather in the hole. The kit will tell you what size hole to drill. It wasn't difficult. However, the seals on the kit are pretty poor. They appear to be affected by gasoline and disintegrated within the first year.
Question:	what size drill bit for the vent, I got no instructions
Answer:	You should use 1/2" drill bit for the for the vent hole. Make sure you drill it near the top above the fuel line.
Question:	What is the diameter of the cap? Does it fit a Blitz Brand 5 gallon can
Answer:	I would definitely not buy this product it's very cheap and brakes immediately. The O-ring in spout fails and gas leaks all over from the neck. I had it happen to me on one I just bought after the first time using it. I would go with the Ez pour. Ez pour is much better quality and you can use the spout with the old cap if there's a fitting issue.
Question:	Would this fit over the 1 gallon paint thinner can
Answer:	Not sure. It's for plastic gas cans, but comes with 2 screw caps - same Diameter. different threads. Might fit, dia. is about 1.25 or 1.5 in. For paint cans, might be better to use a funnel.