12 best fluid transfer pumps
Fluid transfer pumps are essential tools and equipment used in various automotive, garage, and workshop settings for transferring liquids such as fuel, oil, and other fluids. These pumps are designed to facilitate the efficient and safe transfer of fluids from one container to another. Here's what you should know about fluid transfer pumps:
Types of Fluids: Fluid transfer pumps are used for a wide range of liquids, including:
- Fuel: Gasoline, diesel, and other types of automotive fuels.
- Oil: Engine oil, transmission fluid, hydraulic oil, and other lubricants.
- Fluids: Coolants, water, and various automotive fluids.
Applications:
- Automotive Maintenance: Fluid transfer pumps are commonly used in automotive garages and workshops for tasks like changing oil, refilling transmission fluid, and adding coolant.
- Equipment Maintenance: They are also used to service heavy machinery and equipment, ensuring they have the right fluids to function properly.
- Marine and RV: Fluid transfer pumps are valuable for boats and recreational vehicles to transfer fuel or water between tanks.
Types of Fluid Transfer Pumps:
- Hand-Operated Pumps: These pumps are manually operated by hand, often using a lever or piston action. They are suitable for small-scale tasks and are portable and easy to use.
- Electric Pumps: Electric fluid transfer pumps are powered by electricity and provide a more efficient and automated way to transfer fluids. They are suitable for larger volumes and continuous use.
- Battery-Operated Pumps: Battery-operated pumps offer portability and convenience without the need for a power source. They are often used in remote or outdoor settings.
Features:
- Flow Rate: The flow rate of a fluid transfer pump determines how quickly it can move fluids. Higher flow rates are suitable for larger volumes.
- Hoses and Nozzles: Fluid transfer pumps come with hoses and nozzles of various lengths and designs to accommodate different containers and access points.
- Safety Features: Some pumps come with safety features like anti-siphon mechanisms and overfill protection to prevent spills and accidents.
Maintenance and Care:
- Proper maintenance of fluid transfer pumps is essential to ensure their longevity and reliability.
- Regular cleaning, lubrication, and inspection of hoses and nozzles are recommended.
- Electric pumps may require occasional motor maintenance.
Safety Precautions:
- When working with fuel or other flammable fluids, it's essential to follow safety guidelines to prevent fires and accidents.
- Avoid smoking or using open flames in the vicinity of fuel transfer operations.
- Use appropriate safety gear, such as gloves and goggles, when handling fluids.
In summary, fluid transfer pumps are indispensable tools in automotive, garage, and workshop environments, as well as in various other applications.They come in different types and are used for transferring a wide range of fluids safely and efficiently. Understanding the type of fluid you need to transfer, the volume of the task, and the available power sources will help you select the right fluid transfer pump for your needs. Proper maintenance and safety precautions are crucial when working with these pumps to ensure smooth and hazard-free operations.
Below you can find our editor's choice of the best fluid transfer pumps on the market
Slippery Pete Fluid Pump for Quart Bottles - Transfer Gear Oil, Transmission and Differential Fluid with This 5cc Hand Pump (1)
- đ Only Quart Bottle Pump that comes with LONG and SHORT SUCTION TUBES for Tall and Short Quart Bottles!!
- đFits securely on standard quart containers, which is about a 1" opening (WILL NOT FIT RED LINE QUART CONTAINERS OR WIDE-MOUTH QUART CONTAINERS, BUT Slippery Pete's Fluid Pump for Gallon Bottles WILL also FIT WIDE MOUTH QUART BOTTLES!!)
- đ€17â long flexible tube for pumping fluids into tight and awkward places. Rigid suction tube that reaches to bottom of STANDARD QUART CONTAINERS
- đ 100% INSPECTED AND PACKAGED IN THE USA and 100% MONEY BACK GUARANTEE!
- đ Easy to understand instructions on back of header card
User questions & answers
| Question: | will it leak if i use it with the bottle upside down |
| Answer: | If you by rn the bottle upside down you will only be drawing air |
| Question: | Why wonât the long plastic part go into the bottle |
| Answer: | âPlastic partâ?? ALL the parts are plastic so we donât know which you mean. The longest plastic tube doesnât go in bottle. It goes in fill hole of tour diff, trans, transfer case etc. The shorter plastic tube only goes in long, tall quart/liter squeeze type bottles and not needed in shorter quart bottles. If the main body mechanism does not fit in your quart bottle you ave a non standard bottle not used in auto fluids and you need to move fluid to another standard bottle or use a suction pump type exchanger (manual ones are cheap) |
| Question: | What is the exterior diameter of the fill tube |
| Answer: | The fill tubeâs inside diameter is 1/4â, and the outside diameter is 3/8â. |
| Question: | Does come with the slippery pete sticker |
| Answer: | STICKER? NO. NO STICKERS |
Product features
Pumps 5cc Per Stroke
The 5cc pump will empty an entire quart in about five minutes.
Secure Fit for Quart Containers
Fits securely on standing quart containers, which have about a 1" opening.
Flexible Tube for Tight Spots
16" flexible fill tube allows you to pump fluid into tight and awkward places.
Koehler Enterprises RA990 Multi-Use Siphon Fuel Transfer Pump Kit (for Gas Oil and Liquids), Red
Koehler
Product description
The Koehler Transfer Pump Kit allows for the safe and easy transfer of liquids between containers or vehicles, eliminating the risky practice of siphoning dangerous liquids by mouth. Transfer gasoline, oil, antifreeze and other liquids simply and quickly with no mess. The pump can also be adapted to an air pump function for inflating tires, air mattresses, sports equipment, water toys and other inflatables. Each kit includes a multi-use siphon pump, 1 each liquid intake and discharge hoses, two hose connectors, 1 each inlet and outlet nozzles, an air pressure hose and dipstick tube. Ideal for auto and equipment maintenance, RV and boat owners, farm, marine and industrial operations or any other application requiring easy and efficient fluid transfers.
- Safely and easily transfer gasoline and other fluids through a siphon intake and discharge system
- Eliminates need for risky mouth siphoning of dangerous chemicals
- Included attachment for adapting to an air pump function for inflation
- Great for home, industrial, marine and farm use
- fit type: Universal Fit
User questions & answers
| Question: | Can this be used to extract oil from a car engine either from the dip stick location or the oil cap |
| Answer: | It is possible but not a certainty. The small black plastic hose that is included needs to be heated and stretched, then cooled to attempt to straighten it as much as possible. That hose is 4 foot long. Some engines will have a dipstick tube short enough that the hose can extend all the way to the bottom of the oil pan for nearly full extraction, particularly smaller engines or car engines opposed to larger truck engines which could be too great a distance. The hose adapts to the pump by a cone shaped hard plastic adapter piece that inserts into the end of the red vinyl hose. This results in a great distance you will be pulling the fluid so you may need to add oil to the pump intake before starting to get it to prime. The hard plastic adapter piece is not quite a perfect size and relies on friction fit on its tapered section so getting a good seal, yet not restricting the flow too much, depends on just the right amount of insertion of the black hose into it. The shorter answer is that it is possible to get it to do that in some situations but it is not ideal for it nor would it be the right tool for the job if this is your primary purpose for it. Consider that most engines large enough that they cannot be turned sideways or upside down to drain oil out the fill tube or dipstick location, instead have an oil drain plug on the bottom of the oil pan which is the best way to drain all the oil out. Certainly all cars have this oil drain plug, do not depend on oil extraction through the dip stick because this is a regular maintenance item performed dozens of times during the lifespan of the vehicle. |
| Question: | Fuel pump moduel |
| Answer: | I use the device to safely transfer gasoline from portable engine tanks to various containers. |
| Question: | Does the tube fit in a dipstick for extracting oil from a car |
| Answer: | I would go to Home Depot and get some clear tubing that will fit ( Probably 1/4" tubing), and then stop by the cleaning section and buy a $2.00 bottle of liquid hand soap with a pump. Take the pump off of the soap and get rid of the soap in the pump, connect the pump to the tubing. It might go over the pump tube or it may fit inside of it well enough. Heat up the tubing if you cant get it connected ( you can use a lighter for like 1 second, hot water or a hair dryer or whatever ). Or you can use the oil drain plug but if for some reason you cannot, I hope this idea helps. |
| Question: | Is this long enough to hide under a car while siphoning gas |
| Answer: | I suggest hiding under the car, drilling a hole in the gas tank, then lighting a match to examine the hole. Let me know how that works out for you. |
Plews 55001 Lubrimatic Fluid Quart Pump, Fits Standard Quart Bottles
Plews & Edelmann
Product description
Avoid the mess of changing out fluids with our leak-free pump! Our LubriMatic 55-001 Fluid & Oil Transfer Pump is a simple and effective solution for adding fluids to small engines, automotive transmissions and axles, farm equipment, and industrial equipment, and is ideal for adding oil and other fluids, such as antifreeze, fuel, steering fluid, or gear lube, to small engines and marine lower units. Avoid messy spills and the hassle transferring fluids to your engine or other equipment. The LubriMatic 55-001 threads securely onto quart sized bottles and containers with traditional sized necks as commonly used for motor oil, ATF, and gear lube, however, it is not compatible with bottles that have oversize or wide-mouth necks. The LubriMatic 55-001 transfers fluid at 4ccâs per stroke. Great for hard to reach places. Are you tired of wrestling with your average hand pump, trying desperately to fit it into tight spaces and awkward nooks and crannies? The LubriMatic 55-001 includes a long, 17 inch, 3/8 inch diameter flexible outlet hose that allows for easy access to hard to reach fill plugs and tubes. The stiff, rigid construction of the inlet tubes ensures that no clogs or obstructions will keep your fluids from pouring smoothly, and the inlet tubes won't curl like flexible tubes, ensuring a more complete fluid transfer. Professional quality that you can count on. For over 40 years, LubriMatic has been developing and distributing superior lubrication equipment, and we are proud to supply equipment to the industrial, hardware, marine, automotive and agricultural markets, as well as many industries requiring professional grade lubricants and penetrants.
- INDUSTRIAL GRADE: Our LubriMatic 55-001 Fluid & Oil Transfer Pump is a simple and effective solution for adding fluids to small engines, automotive transmissions and axles, farm equipment, industrial equipment, and marine lower units; Ideal for adding oil and other fluids, such as antifreeze, fuel, steering fluid, or gear lube, to small engines and marine lower units
- LEAK-FREE FLUID TRANSFER: Avoid messy spills and the hassle transferring fluids; The Lubrimatic 55-001 threads securely onto quart sized bottles and containers with traditional sized necks as commonly used for motor oil, ATF, and gear lube; Not compatible with bottles that have oversize or wide-mouth necks; Transfers fluids at 4ccâs per stroke
- RIGID INLET TUBES: Make kinks a thing of the past! The stiff, rigid construction of the inlet tubes ensures that no clogs or obstructions will keep your fluids from pouring smoothly; Inlet tubes won't curl like flexible tubes, ensuring a more complete fluid transfer
- FLEXIBLE HOSE: Includes a 17 inch long, 3/8 inch diameter flexible outlet hose to allow easy access to hard to reach fill plugs and tubes
- QUALITY YOU CAN TRUST: For over 40 years, LubriMatic has been developing and distributing superior lubrication equipment, and we are proud to supply equipment to the industrial, hardware, marine, automotive and agricultural markets, as well as many industries requiring professional grade lubricants and penetrants
User questions & answers
| Question: | I want to siphon the fluid from the pump for the convertable top on my car and add new. Does this siphon and fill |
| Answer: | I'm sorry but I do not know.I used it to fill |
| Question: | When you say standard Qt. bottle do you mean the old smaller standard bottle or the new wide mouth standard bottles |
| Answer: | It will fit on a standard oil Qt. bottle or on Qt. gear lube . Plastic bottle,It works great on changing differential fluid . |
| Question: | too bad the product description does not give specifics of the hose. that should be stated. how long is the hose? and what is the I.D. of the hose |
| Answer: | The id is about the size of a 3/8 stud if you stretch it a bit. What are you doing with this product the size of the hose is that critical? This product has worked very well for me and I do more than the adverage share of trans and diff fluid changes. Your real concern should be the size of the threads that this pump will fit. For example I use only Mobile 1 auto trans fluid. The bottle of Mobile 1 has much larger threads than the pump. For some hard to reach fluid fills I keep a clean empty bottle of Motor Craft oil that has the same threads as the pump. It's the only disadvantage I have found to this other wise great product. Besides you can go to any hardware store and get any length clear tubing you like for a long distance transfer. The tubing that comes with the pump must be almost two feet Long I want to say. I have never felt the need for a longer hose in all the situations I've ever come across. Good luck. Hard to go wrong with this pump or most anything else from this manufacture. |
| Question: | Will this screw onto the Red Line (50304) MT-90 75W-90 GL-4 bottle |
| Answer: | No it's too big. On the other hand, it worked just fine to pump out the MT-90 into my 5 speed manual. I did not use any tape, and just kept the bottles level. |
Product features
Plews Lubrimatic Fluid Quart Pump
Ideal for adding oil and other fluids to small engines and marine lower units. Flexible hose for hard-to-reach fill plugs. Quart sized. 4 cc pump.
DuraMax Flo n' Go LE Fluid Transfer Pump and 14-Gallon Rolling Gas Can
Scepter Marine
Product description
The scepter flo N' go Duramax 14 gallon portable fuel caddy is siphon based and manufactured from durable, high-density polyethylene. It is designed for industrial, commercial, and recreational applications and comes with a 10' hose and hanger for easy storage. Made for use with gasoline, diesel, or kerosene fuels and is great to use with boats, generators, lawn tractors, snowmobiles, ATVs, and more.
Whether your fuel needs include watercraft, hunting and camping, generators, backyard power equipment, or professional landscaping tools, the Duramax Flo 'n' Go fluid transfer pump and rolling gas can make refueling a snap. The Flo 'n' Go is made of a durable, high-density polyethylene material in red that safely holds gasoline, diesel, or kerosene fuels. When it comes time to refill, the pump's patented Flo 'n' Go hand pump and pump holder handle takes over, letting you transfer fluids on level surfaces with minimal priming. And thanks to the dual mechanical shutoff valves at both the tank and hose, the tank's disconnection is spill-proof, providing a safe fuel transfer for both you and the ecosystem.
The tank includes a sizable 14-gallon/53-liter capacity and a 10-foot-long fuel hose, as well as a bolt-on hanger for convenient hose storage. And users will love the sturdy 6-inch wheels, which makes it a breeze to maneuver the tank over rough terrain. Other features include an ergonomically designed, heavy-duty top handle with extra-deep base unit handholds for transport; a UL-approved mechanically vented fill cap; and recessed grooves that provide nuisance-free strapping locations for safer transport. The Flo 'n' Go fluid transfer pump meets all DOT and UN transportation requirements.
- Duramax 14 gallon fuel tank on wheels, ideal for farm and rural use as well as marine and recreational use
- Ergonomically designed, heavy-duty top handle with extra deep base unit handholds for transport
- Perfect for use with outboard engines
- Molded-in feet keep tank off floor for increased ventilation and stability
- Accepts standard 1/4 NPT marine tank fittings
- Comes with MaxFlo Siphon Pump with at-the-handle pump control allows for auto-shut-off and restarts and clean, hassle-free siphon control
- Wheeled for easy transportation, high density polypropelyne for dent, corrosion and rust resistance
User questions & answers
| Question: | Is there a power pump handle option |
| Answer: | You could but why not just buy a standard can then. The point of the Boss is its push button, positive control, no spill spout. The press & pour works great! |
| Question: | does this leak when layed down |
| Answer: | DU!!! That is a dust cover, you must remove it first and place it on the black spout so you do not lose it!! |
| Question: | Can you use this to pump or siphon fuel from another car so I can get fuel from our other car in times of emergency |
| Answer: | 2+ means a bit more than 2 gallons. So if you do not let go of the gas handle at exactly the right time, you will probably not spill. |
| Question: | How to operate it |
| Answer: | It only holds two gallons. Why would anyone want to know the flow rate? |
Product features
No Lifting - No Spills - No Overfills
The DuraMax is ideally suited for farm and rural use as well as cottage and marine applications. Made from high density polyethylene, the DuraMax fuel container is resistant to corrosion and denting. Its sturdy six-inch wheels and extra-deep handle make it easy to deliver fuel dockside when refueling boats or powered water craft.
Innovation in Fuel Transfer
DuraMax is a 14 gallon/53L, portable fuel container on wheels designed for industrial, commercial, and recreational applications. It is a safe, fast, and convenient way to refill gas-powered tools, lawn tractors, boat engines, generators, snowmobiles, ATVs, etc.
Performance Tool W1156 Grip Clip Transfer Pump/ Siphon Fluid Transfer Pump Kit for Water, Oil, Liquid, and Air
Performance Tool
Product description
Grip Clip Transfer Pump.
- Unique couplers offer far more holding power - no more messes from hoses coming loose
- Quick change fittings for easy attach and release
- Clear view barrel allows visual inspection
- Quickly transfers low-viscosity fluids, such as water and oils
- Ideal for changing oil, inflating beach balls, siphoning fluids and more
User questions & answers
| Question: | how long a the hoses that come with this pump |
| Answer: | Mine came with 2 3.5 foot hoses |
| Question: | Can it be used for potable water |
| Answer: | I see nowhere on the product where it says this. When I called their customer support, they said its not rated for food grade certification, however it is of my own opinion that it can work in emergency, but should not risk daily use or hot liquids |
| Question: | will this pump work for gasoline |
| Answer: | It should work with gas. I used it for transmission fluid and it worked fine. |
| Question: | What size (diameter) are the hoses |
| Answer: | Diameter is around 1.5cm. |
Product features
W1611 Floor Jack
Steel lifting saddle with 360 degree swivel Ideal for automotive and garage applications.
W41021 Heavy Duty Jack Stand Set
2, 3 and 6 Ton Sets Ideal for automotive and garage applications.
W41001 Solid Rubber Wheel Chock
All weather, Oil resistant non-slip surface provides superior traction.
W85028 Folding Creeper
Cool weave fabric for extra comfort, weather-resistant and lightweight.
W54288 Drain Plug Remover
Remove the oil drain plug without losing the plug in hot oil. Say goodbye to oil soaked gloves or dropping the plug in the drain pan.
W54057 Oil Filter Pliers
Slip joint pliers designed to fit multiple size filters and textured grip to improve grip strength.
W5235 Oil Drain Plug Assortments
The most common and over-sized drain plugs and gasket make for the perfect assortment for any changing their oil.
W54170 Oil Extraction Pump
Easily removes oil from cars, motorcycles, RVs, boats, lawn equipment and so much more with out removing the drain plug.
Slippery Pete Fluid Pump for Gallon Bottles and Wide Mouth Quart Bottles - Transfer Gear Oil, Transmission and Differential Fluid, Antifreeze with This 30cc Hand Pump
- đPumps 1 FULL OUNCE (30cc) per pump stroke. Pumps an entire quart in 32 strokes!!
- đ4 DIFFERENT SIZE THREADS TO FIT ALMOST ANY GALLON BOTTLE. THREAD COLLARS INTERCHANGE EASILY. (WILL FIT RED LINE GALLON BOTTLES)
- đ€24" FLEXIBLE CLEAR FILL TUBE allows you to direct fluid into tight and awkward places.7" SUCTION TUBE THAT EXTENDS TO BOTTOM OF GALLON CONTAINER.
- đ Will also fit AGL, Toyota ATM, Amsoil and Castrol Edge WIDE MOUTH QUART BOTTLES. Use one of the 4 sizes of thread adapters provided to FIT WIDE MOUTH QUART BOTTLES !!!
- đ100% INSPECTED AND PACKAGED IN THE USA
User questions & answers
| Question: | What part of this is the proposition 65 cancer warning referring to |
| Answer: | Cancer and reproductive harm. |
| Question: | Can this pump handle corrosive chemicals |
| Answer: | It depends on the chemical. It is recommended for use with gear oils, transmission fluids and differential fluids. Beyond that, there are no guarantees that the pump will last very long. However, some customers have said that they use it to remove gasoline from lawnmowers. The pump is NOT recommended for transferring BRAKE FLUID. |
| Question: | Can i use this to pull atf from pan using dipstick tube |
| Answer: | You should be able to draw fluid from any reservoir of liquid. However, I not sure the rigid suction tube that extends from the bottom of the pump is long enough to reach the pan. There are other extractor pumps for sale on amazon that are designed and more suitable for the application that you are referring to. Try searching 'oil extractor pump', and you should get plenty of options. Unfortunately, you're going to have to pay a lot more than $9.59 for one of those pumps. |
| Question: | Can someone please tell me the outside diameter of the plastic tubing |
| Answer: | Outside diameter 12.5 mm or about 1/2" Inside diameter 10.5 mm or about 3/8" |
Product features
Pumps 1 Full Ounce Per Stroke
The 30cc pump will empty an entire quart in only 32 strokes!
Stays in Place While You Pump
Plastic butterfly wings act as a third hand to keep the pump steady and prevent leaks.
Make Your Own Adapter
Simply drill a 1.25" (30mm) hole into any cap to use it with the pump!
Mityvac MVA6851 Fluid Extractor, Manual, 7-1/2 in. L White, Black
Mityvac
Product description
Fluid Extractor, Manual, Length (In. ) 7-1/2, Width (In. ) 11-51/64, Height (In. ) 2-1/2, Depth (In. ) 2. 5, Reservoir Capacity (Gal. ) 0. 05
- Auto & Truck Maintenance
- Package Dimensions: 5.588 L x 34.29 H x 6.35 W (centimeters)
- Package Weight : 0.544 kilograms
- Country of Origin : China
User questions & answers
| Question: | What is the country of origin |
| Answer: | It says right in the listing that it is from Taiwan. |
| Question: | Can this be used to extract gasoline |
| Answer: | Have used it on thicker fluid like power steering / brake fluid. In theory it should work on gasoline too but keep in mind the suction tube is only 12 inches long |
| Question: | can this be used to fill fluids or is it a one way pump |
| Answer: | Yes it can be used to fill fluids - it is a two way device. |
| Question: | Can this be used for brake fluid |
| Answer: | I have used it in my shop with brake fluid. I use it with all auto lubes and fluids. I am vigilant about cleaning it between uses. no problems so far. |
ABN Manual ATF Filler System â 3L Manual Transmission Fluid Pump Tool for Automatic Transmission with System Adapters
- SAVE MONEY ON TRANSMISSION SERVICE WORK: Checking and changing your transmission fluid keeps your automatic transmission lubricated and running smoothly and it helps to avoid wear on your clutches; But going to a mechanic can cost up to a few hundred for a transmission fluid change; Skip the hassle by changing the transmission fluid yourself with the ABN 3L Manual ATF Fluid Pump Automotive Fluid Transfer Pump Fluid Dispensing System
- BUILT TO LAST: Large 3-liter (101.4 oz) fluid container is made of thick plastic for durability and longevity and features 4 supports on its base to enhance stability while you work; Pressure gauge can register up to 30 PSI and faces upwards for easy visibility; 5.3 foot (1.6m) fluid dispensing hose features swivel thread connector to link to filler unit and a metal dispenser with a shut off valve; Metal dispensing nozzle uses an easy-release locking mechanism to hold adapters in place securely
- CONVENIENT STORAGE SYSTEM: With so many little parts it might be easy to lose pieces, but the 21-inch hook and loop adapter belt and 14-inch (35.5 cm) extension band easily fit around the fluid transfer pump automotive filler system for easy organization when working or in storage; 11 elastic slots hold the included transmission fluid fill adapters and more; Included ATF adapters cover the most common transmission systems including DSG and CVT
- EASY TO USE: Open the filling cap and fill the unit using a funnel; Tighten cap and connect dispensing hose; Use the correct adapter then insert into the transmission opening after draining used oil; Use soft grip pump handle to pump liquid from the filler unit to the vehicle; Pressure gauge helps to gauge how fast fluid will move; Do not exceed 20 PSI; Always refer to vehicle manual for further service regulations and remember to recycle used oil properly
- CONTENTS: Transmission oil pump system includes fluid filler unit with pump handle, pressure-relief cap, pressure gauge, 7.5mm x 1.5 m tube, adapter belt, extension band, and 8 transmission fluid fill adapters; Adapters include Ford 1/8â adapter, universal (BMW, Honda, and Nissan) ATF 02 adapter, VW ATF 03 short adapter, VW and Porsche ATF 004 long adapter, VW and Mini Cooper M10 x 1 threaded adapter, VW and Audi DSG ATF adapter, Audi CVT M24 x 1.5 adapter, & Mercedes CVT M12 x 1.5 adapter
User questions & answers
| Question: | Does this have an adapter for a 2013 nissan altima cvt transmission fill plug |
| Answer: | There are a few adapters to fit different angles. |
| Question: | Does it work on a 2015 c7 vette |
| Answer: | Iâve only used it on the manual trans c7 Bette an it worked just fine |
| Question: | Does this have an adapter for a Mercedes Benz 722.9 transmission |
| Answer: | Yes. I used it to fill the transmission on my 2009 R350 which uses the 722.9 after replacing the oil pan on it. |
| Question: | Does this unit pump fluid out also |
| Answer: | Out of vehicle? No, it is intended to be filled with fresh fluid to pump into vehicles |
Product features
ABN 3L Transmission Oil Change Transmission Fill Pump System
Checking transmission fluid levels and quality is easy, but changing the fluid is not as simple. The ABN 3L Transmission Oil Change Transmission Fill Pump System makes servicing your automatic transmission easy and inexpensive.
JUST WHAT YOU NEED
Car fluid pump transmission fill kit includes a 3-liter fluid container with pump handle lid, a pressure gauge, a pressure-release cap, an adapter belt and extension band, and 8 transmission fluid adapters for the most common automatic transmission models for Ford, BMW, Honda, Nissan, VW, Porsche, Mini Cooper, Audi, and Mercedes vehicles.
BUILT TO LAST
Transmission oil fluid pump hand pump oil fill pump system is constructed of premium materials for durability and longevity. Always refer to vehicle manual for service regulations and remember to recycle used oil properly.
EASY TO USE
Open the filling cap and fill the unit using a funnel; Tighten cap and connect dispensing hose; Use the correct adapter then insert into the transmission opening after draining used oil; Use soft grip pump handle to pump liquid from the filler unit to the vehicle; Pressure gauge helps to gauge how fast fluid will move; Do not exceed 20 PSI; Always refer to vehicle manual for further service regulations and remember to recycle used oil properly
Slippery Pete - Fluid Pump for Quart Bottles - 8cc per Pump Stroke and 3rd Hand Adapter, Transfer Gear Oil, Transmission and Differential Fluid with This Hand Pump
Product description
Here's another great idea from Slippery Pete! Thousands of satisfied customers have used Slippery Pete's Fluid Pump for Quart Bottles to re-fill their Gear Oil, Transmission and Differential Fluid. Now, Slippery Pete has improved on this already great little pump with these 2 new features:
- 8cc per pump stroke instead of 5cc. That means less pumps to empty a quart of oil
- A Butterfly adapter on the end of the fill tube that works like a 3rd hand to secure the fill tube while you pump!
What are you waiting for? Buy this hand pump today and experience the innovations for yourself!
NOTE: This pump will only screw onto standard quart bottle opening! IT WILL NOT FIT RED LINE OR WIDE-MOUTH QUART BOTTLES. However, Slippery Pete's Fluid Pump for Gallon Bottles will screw onto WIDE-MOUTH QUART BOTTLES. Just search for Fluid Pump for Gallon Bottles and you'll find it easily.
- đ ONLY Quart Bottle Fluid Pump with a 3rd HAND ADAPTER to secure fill tube while pumping!
- đ8CC PER PUMP STROKE! 17â long flexible tube for pumping fluids into tight and awkward places
- đFits STANDARD quart Bottles, (WILL NOT FIT RED LINE QUART BOTTLES OR WIDE-MOUTH QUART BOTTLES)
- đ LONG AND SHORT SUCTION TUBES for tall and short quart bottles
- đ 100% Inspected and Packaged in the USA! 100% MONEY BACK GUARANTEE!
User questions & answers
| Question: | Does this suck oil for riding lawnmower when changing oil |
| Answer: | It's to add oil to the riding lawnmower. You should get another tool to suck out the oil. |
| Question: | How many pumps needed to empty a quart bottle |
| Answer: | A quart has 946 milliliters and this pump will pump 8 milliliters (or cc) per pump stroke, so that means it will take about 120 pump strokes to empty a quart of oil. |
| Question: | What is the OD of the butterfly adapter |
| Answer: | When the adapter's "wings" are fully extended, it measures 1.15". When compressed, 0.80". The actual outlet is 0.28". |
| Question: | I am going to use the product to change the differential fluid for my 2017 crv touring is this product going to work |
| Answer: | Yes, this will fill the diff fluid in you CRV. The black fitting on the end of the flex tube works as a 3rd hand to secure the tube in the fill hole while you pump. However, this pump is for standard quart bottles with a 28mm bottle opening. If you are using a gallon bottle, or a quart bottle with a wide-mouth opening (38mm), then you will need the Fluid Pump for Gallon Bottles, also by Slippery Pete. |
Oil Change Pump Extractor for Boat, Car, Tubes, Truck, RV,ATV, Riding Mowe,12V 60W Marine Oil Change Pump and Electric Oil Pump, Oil/Diesel Fluid Pump Extractor Scavenge with 2 hose clamps 3 hose tube
Product description
OIL CHANGE PUMP EXTRACTOR
Legal Disclaimer
WARNING: THIS PRODUCT CAN NOT USE TO EXTRACT WATER, GEARBOX OIL OR FLAMMABLE LIQUIDS(SUCH AS FUEL,PETROL,GASOLINE,ETC).
Quick Oil Change Pump, DC 12V 60W
Oil Diesel Fluid Pump Extractor Transfer Pump & Tubes Kit for Car, Boat, Motorbike, Truck and Other Vehicles
To pump motor oil properly, please start the vehicle to heat up the oil (to 40~60 degrees)about 15 minutes! Otherwise, the oil change pump may have low suction or jammed.
Specifications:
Material: Plastic & Aluminium
Color: Black, Yellow
Input Voltage: DC 12V
Wattage: 60W
Current: 5A
Motor Oil (40-60 degrees) Flow Rate: approx. 1L / min
Diesel Flow Rate: approx. 250L / Hour
Inlet Hose Length: approx. 155cm/61''
Inlet Hose Outer Diameter: 6mm/0.236''
Inlet Hose Inner Diameter: 4mm/0.157''
Outlet Hose Length: approx. 124.5cm/49''
Outlet Hose Outer diameter: 12mm/0.472''
Outlet Hose Inner Diameter: 10mm/0.39''
Line Length: approx. 71cm/28''
Package Weight: approx. 1070g
Package Included
1 x Pump Extractor
2 x Inlet Hose
1 x Outlet Hose
2 x Hose Clamps
2 x Battery Clamps
1 x User Guide
- â Efficient Extraction Pump:âŻTransfer pump for changing oil. Extracting Motor Oil From Your Vehicle Without Mess & Specialized Tools Extract The Oil from Your Car, Motorcycle, Scooter, Marine, Quad Bike, Truck, Boat, Forklift, Generator, Tractor, riding mower, snowmower Etc Siphon & Transfer Diesel To Cars, Trucks, Ships, Boats, Tractors, Farm Machinery, Plant Equipment Etc.
- â Ideal Equipment for Oil Change:⯠The 12v 60w oil extractor pump is very easy to use. Pumps oil out throw outlet pipe, no need to lay under your car. Ideal oil change pump extractor equipment for quick and clean oil-changes. The oil will simply draw out the motor through the outlet tube. Simple On/Off Power Switch, easy to use. Great for a quick oil change. and safe time
- â 2 Hose Clip Secures 3 hose tube:⯠Oil change pump equipped with 2 Hose Clip Secures it in place,no flow will ooze, Improve work efficiency, Rubber material is more durable than PVC transparent hose petrol resistant, avoid corrosion and it would prevent from leaking
- â Easy installation :âŻThis high efficient self-priming oil extractor pump is easy to pump various fluids and oils. You just need to place the inlet/outlet hoses at the appropriate positions, connect the power clamps to the car battery and press the button. This process is very simple and you can often do it by yourself to ensure your engine runs smoothly
- â Professional Oil Cleaning Tool:⯠The oil transfer pump is NOT suitable for gasoline/petrol. Do not use this fluid oil change pump to extract water, gearbox oil or easy flammable liquids (fuel, petrol etc). Suitable for extracting oil, diesel etc from a vehicle, (never use for petrol), greatly to help your oil-cleaning task, saving time.
HORUSDY Multi-Use Siphon Fuel Transfer Pump Kit for Gas Oil and Liquids
- Quality Products - Brand New and High Quality, Intake and output transfer system, Robust heavy duty pump, Durable& lightweight abs construction.
- Transfer Liquids - Useful Emergency Fuel Pump, Ideal for fueling any small tanks of ATV's, Boats, Jet Skis/PWC, Generators, Edger's, Trimmers, Lawn Tractors, Snowmobiles, Leaf Blowers, Farm Equipment etc.
- Efficient Liquid Transfer Pump - Pump drains up to 3 gallons/12L per minute, disassembles without tools for easy cleaning, efficiently to refill the fuel to your device and make it active.
- Universal - 3in1 Function, transfer, evacuation and compression, As an inflator for water toys, sports balls and bike tires
- No more Risk for you,we HORUSDY provide a 40 days money back guarantee and 1 year quality guarantee,provide you with the strongest most durable pump available
User questions & answers
| Question: | Can you use it to empty my gas tank |
| Answer: | You did not say what type of gas tank, but I have used it to take gas out of a snowmobile and Jet Skies. It worked just great for me. |
| Question: | Someone put water in my gas tank on my truck. Can I use this device to drain my gas tank? Will it work properly |
| Answer: | Should do the job provided you can get the suction hose into the tank and at the bottom. I have found many uses for the pump. |
| Question: | Would materials used in this product hold up to herbicides |
| Answer: | This siphon is very poorly designed. I used it one time then took it to the trash. I donât believe Iâd use it for herbicide materials let alone what it was designed for. |
| Question: | Can this be used to siphon gas from my 2015 nissan murano and put that gas into my 2005 hyundai santa fe |
| Answer: | If the 2005 is lower than the 2015 yes, if not you would have to siphon into a container then pour in the 2005/ |
Product features
Well, itâs time to have a right-hand man for you!
DasMarine 12V 60W Oil Change Pump Extractor, Oil/Diesel Fluid Pump Extractor Scavenge Oil Change Pump Transfer Suction Transfer Pump + Tubes Truck Rv Boat ATV
Product description
Specifications:
Material: Plastic & Aluminium
Color: Black, Yellow
Input Voltage: DC 12V
Wattage: 60W
Current: 5A
Motor Oil (40-60 degrees) Flow Rate: approx. 1L / min
Diesel Flow Rate: approx. 250L / Hour
Inlet Hose Length: approx. 155cm/61''
Inlet Hose Outer Diameter: 6mm/0.236''
Inlet Hose Inner Diameter: 4mm/0.157''
Outlet Hose Length: approx. 124.5cm/49''
Outlet Hose Outer diameter: 12mm/0.472''
Outlet Hose Inner Diameter: 10mm/0.39''
Line Length: approx. 71cm/28''
Package Weight: approx. 1070g
Package Included:
1 x Pump
1 x Outlet Hose
1 x Inlet Hose
2 x Hose Clamps
2 x Battery Clamps
- ăSpecificaitonă: Input Voltage: DC 12V; Wattage: 60W; Current: 5A;Motor Oil (40-60 degrees) Flow Rate: approx. 1L / min
- ăEasy Installationă: you just need to place the inlet and outlet hoses at the appropriate positions, connect the power clamps to the car battery and press the button. This process is very simple and you can often do it by yourself to ensure your engine runs smoothly.
- ă Ideal Equipment For ă: Extracting Motor Oil From Your Vehicle Without Mess & Specialised Tools Extract The Oil From Your Car, Motorcyle, Scooter, Quad Bike, Truck, Boat, Forklift, Generator, Tractor, Ride On Mower Etc Siphon & Transfer Diesel To Cars, Trucks, Ships, Boats, Tractors, Farm Machinery, Plant Equipment Etc.
- ăWARNINGă: This product is NOT suitable for gasoline/petrol. Do not use this pump to extract water, gearbox oil or easy flammable liquids (fuel, petrol etc)
- ăPackage Includedă: 1 x Pump; 1 x Outlet Hose; 1 x Inlet Hose; 2 x Hose Clamps; 2 x Battery Clamps
User questions & answers
| Question: | Will this connect to most dipstick tubes |
| Answer: | I have used it once couldn't get all the oil out of my car, still had to remove drain plug to get last 1 1/2 qt of oil and it took a while, don't know if I'll be using it again or not, it did leak a few drops of oil out of pump between motor n pump, in the end if you don't have a way of raising u're car/truck guess it's an option. đ |
| Question: | Will i be able to used this on a 2012 Buick lacrosse |
| Answer: | I used it on an aircraft engine through the dipstick line. A Buick should be a cinch. |
| Question: | Can this be converted to AC power |
| Answer: | I am going to say no. It is a very small motor. Mine burnt out after 2 uses, at 12v. If you look for a diesel transfer pump, you can find them in A/C 110v |
| Question: | Can I use this on my 2018 Q7 Audi |
| Answer: | I use it on my waverunner, due to the lack of a drain plug, but I don't see why you couldn't use it on an Audi. |
Latest Reviews
View all
Womens Uggs
- Updated: 26.06.2023
- Read reviews
Cornhole Player
- Updated: 05.07.2023
- Read reviews
Stagg Electric Violins
- Updated: 15.01.2023
- Read reviews
Hunting Jacket
- Updated: 21.01.2023
- Read reviews
Twin Mattress Toppers
- Updated: 03.02.2023
- Read reviews