14 best lisle car jacks

Product description

This body fitting design was developed through testing on many body types to provide optimum comfort. Creeper body is 2 inches longer for a better fit. Urethane rollers are inserted into steel bushings which are molded into the creeper body. Provides added strength and easy roller replacement. Low profile, 7/8 inch floor clearance. Easy to clean surface is resistant to solvents, greases and fuels.

• COMFORTABLE – Ergonomic, body-fitting shape was developed through testing on many body types to provide optimum comfort for daily use and includes a lumbar support. Padded headrest keeps you in a working position and is easily replaceable.
• DURABLE – Special molding process bonds the top and bottom permanently together by creating ribs that make the creeper very strong. The impact resistant, blow molded body is made from one piece of high-density polyethylene plastic and is light weight at only 11.5 lbs. The handles located on 3 sides make it easy to hang, carry or move.
• POP-IN ROLLERS – Six 2 inch ball bearing swivel rollers pop in and out for easy replacement. Urethane wheels are corrosion resistant and are inserted into metal bushings which are firmly molded into the creeper body.
• LOW PROFILE – Unique design provides 7/8 inch floor clearance to clear air hoses, cords, and other obstructions.
• 300 LBS. CAPACITY – Our plastic creepers feature 300 lbs. capacity with a total length of 38 inches, width of 17.5 inches and height of 4 inches.
• EASY TO CLEAN – Surface is resistant to solvents, greases and fuels.

User questions & answers

Question:	What is the weight limit on this creeper
Answer:	My 250 lbs. didn't make a dent. My guess is that 300 wouldn't either. Very stable and easy to maneuver. I recall reading that this is the same creeper that Snap-on sells for twice the price. Good value.
Question:	Will creeper work ok on an asphalt driveway? Are wheels made of rubber, or a very hard material
Answer:	I think they are hard plastic. I used it on my concrete driveway, but if you have any cracks in your asphalt you would want one with larger wheels.
Question:	Where is it made? Usa
Answer:	Clairinda, Iowa, USA
Question:	where was it made
Answer:	Mine has no markings as to where it is made. There are two imbossed patent numbers and a recycle "2" molded in, this thing is so strong and sturdy, I'm leaving it to my nephew in my will as it will outlast me in 10 life times. Never ever seen a creeper this strong and balanced.

Product description

Adjusts Door Hinges on Most All Cars and Light Trucks.



Will adjust doors with either bolted or welded hinges. Simply slide pin end of tool into door latch and close door until tool engages door striker. Now raise or lower tool handle to align door. Comes with two-headed pin adapter for both large and small latches. Specially designed handle, for optimum leverage, makes adjustment fast and easy.

• Adjusts Door Hinges on Most All Cars and Light Trucks.
• Will adjust doors with either bolted or welded hinges. Simply slide pin end of tool into door latch and close door until tool engages door striker.
• Now raise or lower tool handle to align door. Comes with two-headed pin adapter for both large and small latches.
• Specially designed handle, for optimum leverage, makes adjustment fast and easy.

User questions & answers

Question:	Will this work on cargo van rear doors? like the rear doors of a chevy astro cargo van
Answer:	I would think it would do its job on the RH door because you could use the striker on the closed LH door for leverage to then latch the RH door on the tool and adjust it up or down. I don't see it working on the LH door because there is no way to leverage it off a striker. If its sagging, like most answers you are dealing with worn out hinges. You could put a block of wood under it and use a jack to push it up and get some more use out of it, but you run the risk of bending the bottom of the actual door. This tool is great for its application and helps with fine tuning a door to make it just right, when your trying to fix something that needs to be replaced it will only help for a little bit before the part gives out more.
Question:	Will this work on the hoop style strikers
Answer:	I believe it only works on the round solid striker. I'm sure the manufacturer makes on for that. Replace your door pins rather than using this
Question:	Will it work on a 01 gmc sonoma? I already replaced hinge pin but door still sags
Answer:	It will adjust any door. Works great on older gm trucks . That's assuming you installed new brass bushings with the pin
Question:	You close the door on this tool and literally pull the handle upwards for a sagging door? How does it stay? Are we bending something back into place
Answer:	Yes, that's correct. The entire door bends but it is not noticable to the eye because it's too small of a bend over a big area. However judging from your question, if your hinge is heavily damaged from age and rust, this tool will not help you.

Product description

Catch-All Drip Pan.

• Ideal for use on showroom floors, garages, carports, or under equipment
• Made of durable polyethylene material to assure longevity and flexibility
• Holds 8 quarts
• Dimensions are 24" x 36" x 1-1/2"

User questions & answers

Question:	What is the thickness of the material
Answer:	about 1/8" . Versatile light weight pan to contain small drip leaks. Oil, solvents rain water, mud and snow. It is a plastic, vinyl material and it is subject to melting/warping if over heated or placed in direct contact with fire, (open flame) torch etc. or other very hot objects, Common sense
Question:	Is this waterproof? What is the material? Can it effectively be used as a snowblower mat to contain melted snow drips
Answer:	Composed of Polymer Plastic but not extremely flexible. Not designed to handle heavy (vehicle) weight if ran over. It will bend slightly but would "crease" and crack if bent too much. Primarily fabricated to lie flat , having raised (1-1.5"" lip edges to allow pan to contain drip-page from most any liquid product. Oil leaks and similar in garages, small amounts of mud/snow, salt drip-page from vehicles, boots, shoes and similar. also good combined with "oil -pig" absorbent mats purchased separately for oils and solvents.. Best if used indoors as it s fairly light and could/would blow away if placed in windy condition areas.
Question:	One reciewer said it was paper thin. Is this flexible enough it won't crack when lifting to clean
Answer:	Yes it's plenty tough and flexible to lift and clean. I driven over it as well. It has exceeded my expectations.
Question:	Are the dimensions listed for the interior of the tray lip, or the overall footprint (including flange
Answer:	The overall footprint (including flange) is 23 1/2" by 35 1/2"

Product features

About us

Lisle Corporation recently celebrated the company's founding and 115 years of continuous manufacturing in Clarinda, Iowa in 2018. The privately owned company is led today by third, fourth, fifth and sixth generation family members.

C.A. Lisle started the company in 1903 with the first product being horse-powered water well drilling machines. To combat the seasonality of the well drilling business, the young company branched out and also manufactured washing machines, cream separators, and push-type reel lawn mowers.

Lisle 19722 Drip Pan

Ideal for use on showroom floors, garages, carports, or under equipment.

Made of durable polyethylene material to assure longevity and flexibility. Holds 8 quarts. Dimensions are 24" x 36" x 1 -1/2".

Product description

This Heavy-Duty Impact Socket is Designed with More Than Three Times the Standard Socket Mass to Direct More Energy to Removing the Bolt.

• Can be used on Honda engines that use a 19mm hex pulley damper bolt or other 19mm applications
• Made with heat-treated, impact quality alloy steel; Use with 1/2" drive

User questions & answers

Question:	Will this work with my kobalt corded impact gun
Answer:	I am not sure of your impact gun’s torque rating, mine is rated at 650 ft pounds. I have seen videos of people using this socket with cordless impact guns and it worked for them. So I would think that it would, just can’t say for certain that it will. Hope this helps.
Question:	Will this socket fit through the center of the holding tool? Just in case I need to use both at once
Answer:	Don't know have never needed to use both. This socket will take off crank bolts on honda with almost any 1/2 air impact. This is a must have tool for Honda timing belts. Has never failed to remove bolt for me using my old beat up ingersoll 231c.
Question:	Engine turns clockwise (when looking at the nut.) It should never be turned counter-cw. This will drive engine counter-cw if bolt is too tight
Answer:	Usually this tool is used when replacing a Honda timing belt. Once you install the new belt (after aligning all the timing marks), you can ONLY turn the crankshaft counter-clockwise. Turning it by hand clockwise WILL result in the timing belt jumping teeth. Once you are sure timing is correct you tighten the pulley bolt to the required lb/ft.
Question:	Can this socket be used with a big breaker bar to get the job done? Or is impact wrench required
Answer:	The socket will fit the bolt and the breaker bar will fit the socket but there is no way you can hold the crankshaft from turning if you use this socket with the breaker bar. In order to use a breaker bar you must install the crankshaft holding tool that has a hole through the center to put a deep socket through to the crankshaft bolt. This socket is way too thick walled and will not go through the center of the holding tool. This socket on an impact gun, works without the using a crankshaft holding tool and it works real good.

Product features

Lisle 77080 19 mm Harmonic Balancer Socket for Honda

This Heavy-Duty Impact Socket is Designed with the Standard Socket Mass to Direct More Energy to Removing the Bolt.

Can be used on Honda engines that use a 19mm hex pulley damper bolt or other 19mm applications. Made with heat-treated, impact quality alloy steel. Use with 1/2" drive.

Product description

SCISSOR LP 5/16

• Made in Taiwan
• Package height :1.016 cm
• Package length :12.192 cm
• Package width :4.064 cm

User questions & answers

Question:

What sizes are in this set

Answer:

Disconnect Applications 63740 3/8" Red A/C Lines on 1981 & newer Ford and some 1994 & newer Chrysler vehicles 63750 3/8" Yellow Fuel lines on 1987 & newer Ford vehicles 63760 1/2" Blue A/C Lines on 1981 & newer Ford and some 1994 & newer Chrysler vehicles 63770 1/2" Green Fuel lines on 1987 & newer Ford vehicles 63780 5/8" Short Black Heater Hose on 1995 & newer Ford Crown Vic & Mercury Grand Marquis w 4.6L engines. 63790 5/8" Long Black A/C Lines on 1981 & newer Ford and some 1994 & newer Chrysler vehicles 63810 3/4" White A/C Lines on 1981 & newer Ford and some 1994 & newer Chrysler vehicles

Product description

This heavy-duty plastic lift drain funnel extends the catch area of any lift drain. The funnel catches any loose parts. It is flexible, if run over it will return to its original shape. The super transmission drain funnel fits the Ford E 40D and others. The fluted design can be used for draining oil filters. Dimensions are 22 inches x 23 inches.

• Heavy-duty plastic lift drain funnels extend the catch area of any lift drain and the funnel catches any loose parts
• Flexible to hold up under extreme use
• Fluted design can be used for draining oil filters
• Funnel size is 22 inches by 23 inches

User questions & answers

Question:	How easy is it to clean
Answer:	Very easy I just use brake clean
Question:	Does the opening at bottom of the funnel fit into 3" waste water tote? What is the size of the opening
Answer:	Short answer, no. It is designed to fit the funnel of an oil drain service cart. Actual opening is 6".
Question:	What is the OD of the bottom round part
Answer:	5 1/2 in across 171/2 round
Question:	Any oil splatter when oil drains into this funnel
Answer:	https://www.amazon.com/Lisle-38780-Square-No-Splatter-Pad/dp/B002AENGOG/ref=pd_bxgy_263_2/140-4533699-0805768?_encoding=UTF8&pd_rd_i=B002AENGOG&pd_rd_r=930ce70f-515f-11e9-a48a-612c23722fcc&pd_rd_w=Q92cu&pd_rd_wg=qOGfX&pf_rd_p=a2006322-0bc0-4db9-a08e-d168c18ce6f0&pf_rd_r=4SDXCPXTMZ3K0F0ZT4XX&psc=1&refRID=4SDXCPXTMZ3K0F0ZT4XX This anti-splatter pad (basically a really big scotchbrite pad) will prevent splatter. Hot oil, or thin ATF can and will splatter if falling more than a few inches, especially if it hits the big smooth surfaces in the corners.

Product description

This specially shaped, translucent jug holds 8 gallons. Reinforced base will not warp with hot oil. It features a wide working range from 36-1/2 inches to 74 inches. Its lower center of gravity increases stability and four 2-1/2 inches ball bearing wheels swivel and roll easily. It also has a heavy-duty adjustment clamp, large handle and big pour spout with threaded cap. Large 15 inch funnel has strainer built-in to catch drain plugs.

• Oem Equivalent Part Number: Dynamo Dyohta30L Johndow Industries Crew Chief Jdi-8Dcp
• Fit Type: Universal Fit
• Included Components: 11052 Spout Cap 11202 Jug 11302 Funnel 11402 Top Tube- Plated 11502 Bottom Tube- Black 11512 Tube Lock Ring 11602 Wheel Assembly 11702 Tube Clamp
• Special Features: Built-In Strainer Wheeled Quick Release Adjustment

User questions & answers

Question:	Is it 18 gallon or 8 gallon capacity
Answer:	It is an 18 Gallon Oil Lift Drain. Eighteen gallon capacity.-Shari, ToolSource Product Manager
Question:	What is the height of the yellow plastic body (from ground
Answer:	up to 6 ft.
Question:	Is there any way to get the pipe, wheels, and plugs sent to me? I recieved this item today and the box only had the funnel and the jug
Answer:	Contact the seller, you are missing these items.
Question:	is it made in the USA
Answer:	Be-live it or not, Yes it is made in USA and the quality proves it- not china junk

Product features

Bottom - Lisle 11102 Oil Lift Drain - 8 Gallons

Quick Release Height Adjustment.

This specially shaped, translucent jug holds 8 gallons. Reinforced base will not warp with hot oil. Has a wide working range from 36 1/2" to 74". Its lower center of gravity increases stability and four 2 1/2" ball bearing wheels swivel and roll easily. Also has a heavy-duty adjustment clamp, large handle and big pour spout with threaded cap. Large 15" funnel has strainer built-in to catch drain plugs. Base of funnel is 1 3/4" wide.

Top - Lisle 11102 Oil Lift Drain - 8 Gallons

Quick Release Height Adjustment.

This specially shaped, translucent jug holds 8 gallons. Reinforced base will not warp with hot oil. Has a wide working range from 36 1/2" to 74". Its lower center of gravity increases stability and four 2 1/2" ball bearing wheels swivel and roll easily. Also has a heavy-duty adjustment clamp, large handle and big pour spout with threaded cap. Large 15" funnel has strainer built-in to catch drain plugs. Base of funnel is 1 3/4" wide.

Product description

Set of Four Relay Test Jumpers Make Testing Relays or Live Circuits Quick and Easy.

• Set includes four jumpers to fit the most popular size relays on domestic and import vehicles; simply remove relay to be tested, insert correct jumper and insert relay into jumper
• When using green four pin jumper be careful to align pins on jumper and relay correctly
• Jumpers have tabs for clamping and flat pads to place test leads on
• Set comes in blow-molded case for storage
• No need to pierce wires or connect multiple jumper wires

User questions & answers

Question:	It has the 4 or 5 prongs for honda
Answer:	it has an 4 and 5 prong plug but not for the real small relays in new cars
Question:	does it come with instructions
Answer:	The only instructions are on a label on the inside top of the case. It has fairly basic information and the print is small.
Question:	Does this work with mitsubishi lancer evo's relays? like the panasonic 8627a
Answer:	holy lancer most relays are universal theres a good chance it will fit I would look at a info source ie Mitchell alldata motologic and look at the relay box top view and look at the pin designation best of luck to you
Question:	what is the jaw opening at the tip? will it grab small fuses
Answer:	Not for fuses but works well on any relays.

Product features

Lisle 56810 Relay Test Jumper Kit

Set of Four Relay Test Jumpers Make Testing Relays or Live Circuits Quick and Easy.

Description

Set includes four jumpers to fit the most popular size relays on domestic and import vehicles. Simply remove relay to be tested, insert correct jumper and insert relay into jumper. When using green four pin jumper be careful to align pins on jumper and relay correctly. No need to pierce wires or connect multiple jumper wires. Jumpers have tabs for clamping and flat pads to place test leads on. Set comes in blow-molded case for storage.

Product description

This tool separates the rubber supports from exhaust hanger brackets. The tool works on all import and domestic car and truck exhaust systems that use the rubber hanger supports. The operator simply squeezes the pliers handles to force the rubber support from the exhaust hanger to make a difficult job much easier.

• This tool separates the rubber supports from exhaust hanger brackets.
• The tool works on all import and domestic car and truck exhaust systems that use the rubber hanger supports.
• The operator simply squeezes the pliers handles to force the rubber support from the exhaust hanger to make a difficult job much easier.
• The tool works on all import and domestic car and truck exhaust systems that use the rubber hanger supports. The operator simply squeezes the pliers handles to force the rubber support from the exhaust hanger to make a difficult job much easier.

User questions & answers

Question:	Is the push bar hollow to center itself over the hanger
Answer:	the end is dimpled to stay centered over the tapered end of the mounting post.
Question:	Will this work for a 97 toyota corolla DX 1.8l 7afe
Answer:	Works on all vehicles with rubber exhaust hangers.
Question:	Where is this made
Answer:	Not sure where but I do know it's an amazing tool that makes life a heck of a lot easier
Question:	Does this work to install new hangars as well
Answer:	I don't think it would be much help to install new hanger. You could put some oil or WD-40 on hanger and then use a c-clamp or bar clamp to squeeze the hanger through the rubber, if you cant get it by hand.

Product features

Lisle 38350 Exhaust Hanger Removal Pliers

• This tool separates the rubber supports from exhaust hanger brackets.
• The tool works on all import and domestic car and truck exhaust systems that use the rubber hanger supports.
• The operator simply squeezes the pliers handles to force the rubber support from the exhaust hanger to make a difficult job much easier.
• The tool works on all import and domestic car and truck exhaust systems that use the rubber hanger supports. The operator simply squeezes the pliers handles to force the rubber support from the exhaust hanger to make a difficult job much easier.

Lisle 38350 Exhaust Hanger Removal Pliers

• This tool separates the rubber supports from exhaust hanger brackets.
• The tool works on all import and domestic car and truck exhaust systems that use the rubber hanger supports.
• The operator simply squeezes the pliers handles to force the rubber support from the exhaust hanger to make a difficult job much easier.
• The tool works on all import and domestic car and truck exhaust systems that use the rubber hanger supports. The operator simply squeezes the pliers handles to force the rubber support from the exhaust hanger to make a difficult job much easier.

Product description

Low Profile Design Quickly and Easily Disengages the Line from Jiffy-Tite Quick-Connect Fittings without Removal of the Clip. The teeth of the tool fit perfectly into tight tolerance of Jiffy-tite connectors and when rotated allow the line to be pulled without damage to the connector or retaining clip so they can be reused.

• Package Dimensions: 11.43 cms (L) x 9.144 cms (W) x 11.43 cms (H)
• Product Type: Hardware Tubing
• Package Quantity: 1
• Country Of Origin: China

User questions & answers

Question:	Will this work on a 1990 Chevrolet C1500 radiator
Answer:	If it is a 3/8 line with a retainer clip. It will work. If your not sure what a retainer clip looks like just google transmission retainer clip. If you have a lot of room to work with you might be better off with something that will grab better. This is a small tool for tight spots.
Question:	Does this come in the plastic case
Answer:	yes it comes in a plastic case.
Question:	Does the set come in a case
Answer:	Yes it comes in a plastic case about 3" x 4"
Question:	Which quick disconnect tool would work that i can get on amazon which is the same as j-44827 for a 2005 cadillac sts
Answer:	For trany lines this will work great for u. Lot less expensive and works great i use this tool alot as a GM tech....

Product description

Contains 8 popular disconnect tools for A/C and fuel lines. A complete set of disconnect tools that can be stored in a handy blow-molded case. All disconnect tools are also available individually.

• Contains 8 popular disconnect tools for A/C and fuel lines
• A complete set of disconnect tools that can be stored in a handy blow-molded case
• All disconnect tools are also available individually

User questions & answers

Question:	Does this set include the A/C line disconnect tool for Lincoln
Answer:	I'm not sure. I used for fuel inyection system, fuel system. Is a very completed set tools for oldest and newest vehicules
Question:	does this works to remove the fuel line connected to the fuel rail in Ford, jeep and chrysler
Answer:	I've only used it on a Ford F150 pickup, but it worked fine for that.
Question:	Does this have a set that works on Subaru fuel lines
Answer:	Sorry not sure about Subaru's. But its is a good set worked on Nissans,GMs
Question:	Is there anything in this kit for GM transmission cooler lines
Answer:	Yes just about all late model GM vehicles

Product features

Lisle 39900 Master Disconnect Set

Product description

Oxygen Sensor Thread Chaser.

• Cleans Threads in Oxygen Sensor Holes
• Use with 3/4" hex socket or 3/8" square drive; Size: M18x1.5
• Also works on M18x1.5 spark plug threads; important: Use anti-seize
• Fit type: Universal

User questions & answers

Question:	Would this clean/cut if the threads are shot
Answer:	Yes, it is a thread " chaser " and will clean and repair threads with normal wear. Severely damaged threads would require a heli-coil or similar solution. Thread chaser is best place to start, hope this helps.
Question:	Will this work for a lambda sensor on Paccar engines
Answer:	It works on O2 sensors if your using it on the same size as a car O2 sensor threads but it does work good
Question:	Where is this made
Answer:	My information states the Lisle 12230 is made in the USA. Over 90% of the Lisle line is made in the USA.
Question:	Is this a "one size fits all" tool? or are all O2 sensor threads the same? I need this for a base model 06 impreza
Answer:	They are indeed the same industry standard with a threading pitch of M18x1.5 for the o2 sensor. Try using a 22mm metric socket / wrench and NOT a 7/8" SAE tool to remove the sensor (after being pre-soaked with penetrating oil overnight) as 22mm will be a more snug fit for those o2 sensors to prevent rounding the corners. Be sure to use anti-seize to "chase" the threads when using this Oxygen Sensor Thread Chaser.

Product features

About us

Lisle Corporation recently celebrated the company's founding and 115 years of continuous manufacturing in Clarinda, Iowa in 2018. The privately owned company is led today by third, fourth, fifth and sixth generation family members.

C.A. Lisle started the company in 1903 with the first product being horse-powered water well drilling machines. To combat the seasonality of the well drilling business, the young company branched out and also manufactured washing machines, cream separators, and push-type reel lawn mowers.

Lisle 12230 Oxygen Sensor Thread Chaser

Use with 3/4" hex socket or 3/8" square drive. Size: M18x1.5 Also works on M18x1.5 spark plug threads. IMPORTANT: Use anti-seize.

Product description

Bigger Wheels for a Better Ride.

• SMOOTH RIDE – With the same body as our popular low profile creepers, the larger wheels provide a smoother ride on cracked or uneven floor surfaces, over floor debris and under heavy loads. Provides 3 ¾ inch floor clearance to obstructions.
• COMFORTABLE – Ergonomic, body-fitting shape was developed through testing on many body types to provide optimum comfort for daily use and includes a lumbar support. Padded headrest keeps you in a working position and is easily replaceable.
• DURABLE – Special molding process bonds the top and bottom permanently together by creating ribs that make the creeper very strong. The impact resistant, blow molded body is made from one piece of high-density polyethylene plastic and is light weight at only 14 lbs. The handles located on 3 sides make it easy to hang, carry or move.
• POP-IN ROLLERS – Six 4 inch ball bearing swivel rollers pop in and out for easy replacement. Urethane wheels are corrosion resistant and are inserted into metal bushings which are firmly molded into the creeper body.
• 300 LBS. CAPACITY – Our plastic creepers feature 300 lbs. capacity with a total length of 38 inches, width of 17.5 inches and height of 8 5/8 inches. EASY TO CLEAN – Surface is resistant to solvents, greases and fuels.
• EASY TO CLEAN – Surface is resistant to solvents, greases and fuels.

User questions & answers

Question:	Can i getthe bi GB wheels on a black model
Answer:	Junk don’t buy
Question:	What is the weight capacity
Answer:	When I bought mine, I read about every review. I thought it was rated at 300 or 350 lbs. However, I went to the manufacturer web site, and they did not mention anything about weight capacity. I then looked at some of the reviews at amazon. One of the reviews said he thought it was rated at 250 or 300 lbs. Another reviewer said someone who wighed 350 lbs. used it several times and did not hurt it any. Both of these reviews were with the smaller 2" wheels. This creeper has the larger 4" whells and is suppost to handle more weight and roll even better (although the creeper itself is the same--just larger wheels). I am sorry I could not be of any more help. I weigh about 240 lbs. I love this creeper. I do not know if their website has changed since I bought mine or not, but I could not find the weight capacity either.
Question:	what is the floor clearance
Answer:	Floor to underside is 4" then you have an inch for form so technically you are 5 inches from the ground
Question:	Where is this product made
Answer:	Don’t buy it. Wheels already fell off. Absolute junk.

Product description

This body-fitting design was developed through testing on many body types to provide optimum comfort. Creeper body is 2" longer for a better fit. Urethane rollers are inserted into steel bushings which are molded into the creeper body.

• COMFORTABLE – Ergonomic, body-fitting shape was developed through testing on many body types to provide optimum comfort for daily use and includes a lumbar support. Padded headrest keeps you in a working position and is easily replaceable.
• DURABLE – Special molding process bonds the top and bottom permanently together by creating ribs that make the creeper very strong. The impact resistant, blow molded body is made from one piece of high-density polyethylene plastic and is light weight at only 11.5 lbs. The handles located on 3 sides make it easy to hang, carry or move.
• POP-IN ROLLERS – Six 2 inch ball bearing swivel rollers pop in and out for easy replacement. Urethane wheels are corrosion resistant and are inserted into metal bushings which are firmly molded into the creeper body.
• LOW PROFILE – Unique design provides 7/8 inch floor clearance to clear air hoses, cords, and other obstructions.
• 300 LBS. CAPACITY – Our plastic creepers feature 300 lbs. capacity with a total length of 38 inches, width of 17.5 inches and height of 4 inches.
• EASY TO CLEAN – Surface is resistant to solvents, greases and fuels.

User questions & answers

Question:	Whats the difference besides color from the lisle
Answer:	They are the same its only the color that changed
Question:	What am I missing? The wheels won't stay on. They don't seem to snap in or screw on. I cannot even get 4 on at a time. Suggestions
Answer:	The wheels snap in place. It takes a hard push but I had no difficulty and getting them attached - no tools needed just push hard and they will snap in place.
Question:	How many inches off the ground is the top surface of the pad where your body rests
Answer:	The part your shoulders rest on is 2 1/4" off the ground and the part your rear-end and thighs rest on is 4" high
Question:	what is the weight limit
Answer:	I don't know the exact weight limit but I am 280 and don't have any problem rolling around on my driveway or garage floor. Hope this helps