12 best ev charging ports

Product description

The EV Charge Solutions portable electric vehicle charger is a Level 2 station that delivers 16 amps (3.8kW) to your vehicle. The charge cable measures 25 feet from plug to plug. This is a compact portable station that is an ideal solution for low-cost charging in your garage or to keep in the trunk of your EV for charging at work or on trips. The charging station features a control box with LEDs indicating the status of the charge. There is a description for each light pattern in the product photos above. The charger comes with a draw string bag for storage and a soft gel cap that covers the connector and keeps it from getting wet or dirty. Below you will find the product specifications:



Charging plug meets SAE J1772 standards

Power plug meets NEMA 6-20 standards

Control box meets SAE J1772 control principle

Excellent protection performance, protection grade IP55



Parameters

Rated current and voltage: 110-240V AC 16A

Working temperature: -30 ° C ~ + 50° C

Mechanical life: no-load plug in/pull out> 10000 times

Impact of external force: can afford 1m drop and 2T vechicle run over pressure



Materials

Case Material: Thermo plastic,flame retardant grade UL94-0

Contact Pin: Copper alloy, silver + thermo plastic on the top

Sealing gasket: rubber or silicon rubber



Control Box

Leakage protection(Restart recover)

Over-voltage under-voltage protection (self-checking recover)

Overload protection (self-checking recover)

Lightning protection



One Year Warranty



*requires dedicated 20 Amp circuit

• JUST PLUG-IN AND CHARGE: Level 2 portable EV charger. Requires a NEMA 6-20 socket.
• REACH BOTH SIDES OF YOUR CAR: 25ft charging cord (total length, plug to plug) provides plenty of reach to the charge port.
• UNIVERSAL COMPATABILITY: Charges every brand of EV on the market (Teslas need adapter)
• FAST AND EASY: Charges 3x to 4x as fast as your Level 1 cord that came with the car. Features control box with LED charge status indicators. Comes with a draw string bag for storage.
• Rated current and voltage: 110-240V AC | 16 Amp | J1772 SAE connector (will operate on 110v with adapter, not included)

User questions & answers

Question:	does this work for a chevy spark
Answer:	Bought one that said it was “Fully Unlocked” and most definitely works on T-Mobile.
Question:	Will this work for a hybrid bmw 740e
Answer:	Yes cricket uses the same network as att
Question:	Does this work for a Nissan Leaf
Answer:	My boyfriend and I both use straight talk and it works
Question:	What is the average charge time for a Chevy Volt
Answer:	Yes it is. Be sure to use a cable suited also for the Iphone 12 pro max

• This wraps will make your charging port stylish and stand out
• Protect the charging port area from scratches

User questions & answers

Question:	Will this work on the model Y
Answer:	It is supposed to be unlocked therefore it will work with t-mobile
Question:	Is this matte carbon fiber? How difficult is install
Answer:	Short Answer—Yes. (Although Virgin is CDMA, this phone is GSM/CDMA UN-locked, so it will work just fine... Longer “why” explanation—This phone is “un-jailed” (unlocked gsm/cdma), so it doesn’t matter if you’re using a prepaid phone service provider (Boost, Virgin, GoPhone, TracPhone), or postpaid phone service (AT&T, T-Mobile, Verizon, Sprint). Both Pre & Post paid services sell phones (often with added brand info) which leads people to think they have to get the phone from that provider, (you don’t—you just have to buy a phone compatible with their network. Providers promote phones “jailed” to that specific carrier’s cellular network protocols (Example: ATT, T-Mobile are GSM...Sprint, Verizon are CDMA...Globally overseas carriers are GSM), but they usually sell in-jailed phones too... When the protocols were being developed some carriers chose one system, some chose others...BUT...it also serves to keep you with that carrier if you don’t know any better, & don’t get a jail-broken (unlocked) phone. The carrier will sell an unlocked (jail-broken) phone at a higher price because you are free to bounce around to another service, whereas if your phone is jailed your options become limited regarding movement to another service provider. As an incentive, they’ll sell you a locked (jailed) phone with their service at a cheaper price to keep you with them. ~K P.S. Hey GSM’ers... DON’T be freaked out that phone comes in Verizon box—it is fully unlocked, & YES, Verizon is on CDMA, but they DO sell unlocked phones. Just pop your SIM in & you’re good to go... Hope this helps, because no one explained this to me, & I had to learn by trial & error...

Product description

Available in Carbon Fiber and Brushed Metal, this charging port wrap for the Tesla Model 3 adds seamless style and protection. Installs in minutes. Product Features: Made with premium 3M 1080/2080 vinyl Easy installation in under 5 minutes Fits all Tesla Model 3 vehicles Includes: 1 x Squeegee 3 x Alcohol cleaning wipes

• THE ONLY FULL COVERAGE KIT ON THE MARKET: Our kits are a TRUE “Chrome Delete” for your Tesla Model 3 Charging Port.
• EASY INSTALLATION: We ship our kits with transfer film so you can fine tune the positioning of your vinyl wrap, ensuring precise and easy application. Installation time is around 5 minutes.
• PREMIUM 3M QUALITY – ADVANCED SELF-HEALING TECHNOLOGY - Made from premium 3M 1080/2080 vinyl, these wraps are made tough and designed to last for years. Tesla 3 Charging Port Wrap defies unexpected scratches, with self-healing technology that restores any scuffs and scratches to “like new” appearance by simply applying heat. Fingerprints and dust are an even more simple wipe away.

User questions & answers

Question:	after installing the sticker on the charging port the door sometimes doesn’t open using the charging cable wand! Could it be the sticker
Answer:	We do not know. It is best to purchase an iPhone that is sold in Mexico.

• A STANDARD 120V (NEMA 5-15) ADAPTER: Sometimes, Megear level 2 EV charging（NEMA6-20 Plug） in your garage is not an option. That's why we created an EV charging set that includes a Level 1 adapter cable which meet with common outlet in your house. The 3 feet long adapter enables you to charge your electric car via a standard 120V (NEMA 5-15) wall plug.
• VERSATILE VEHICLE COMPATABILITY: The plugs are compatible with all major EV automakers and multiple power sources: a Dryer, RV-type or regular wall outlet with adapters.
• 3.86 KW/H FASTER CHARGING SPEEDS: With level 2 charging, most electric vehicles will charge up to 11 miles per hour. Our level 2 EVSE charging speed up to 3x faster than your car's original charger,which means you can spend more time heading out for fun and adventure and less time waiting around.
• MULTIPLE PROTECTION: The EVSE provide lightning-proof, leakage protection, overvoltage protection, overheat protection, overcurrent protection ,IP55 rating waterproof, UL94V-0 rating flame resistance for your safety. Control box with LED indicators help you learn about the charging status.
• PROFESSIONAL AFTER -SALES: Local customer service team offer life-time hassle-free technical support, and 12 Months warranty. If anything is not to your complete satisfaction, simply reach out to us and we will make it right!

User questions & answers

Question:	Seriously, no user manual included. no user manual i can find online. how could i stop charging? the charger seems locked on the car. thanks
Answer:	On my car i just unlock the car with the keyfob which releases the charger port lock you are referring to, but only temporary (ie: you need to unplug within 30 seconds or so, or the car will relock it) Another alternative is to simply unplug this from the wall.
Question:	I have a 2012 chev volt. I need to buy a new portable charging unit that will plug into my garage which is a normal household plug
Answer:	I would buy a 220 volt charger that would plug into a electric dryer socket. this would charge your volt 2 to 3 times faster. if you don't have this you can run a line to your garage from your electric box.
Question:	Can the level 1-2 charger with nema 6-20 plug charge at 16 amp rate with 120v when adapted to either a nema 5-20r or a nema tt-30r
Answer:	At 120V the charger charges at 1/2 the rate of 240 Volts The calculation of KVA or KW depends on both amps and volts. So if you use this charges at 240V, it is a 3.6 KW charger and at 120V it is a 1.8 KW. At either voltage the amp draw can be as high at 16 AMPS.
Question:	Hi, can I charge in my 110v outlet? and what is the output voltage
Answer:	This unit has an adapter that you can use for either 110V or 220V (the small cord). these cords do not change the voltage, they only monitor for faults and send what ever voltage the unit is plugged into, through to the car.

Product features

Customer Survey Who Have Bought Megear EV Charger

This 16 amp 240v charger cable is perfect and preferable to higher amperage charging cables. Your lithium ion battery will last longer over it’s lifetime trickle charging at 120v overnight. This 16 amp “faster” charger is your next choice and will charge your battery in half the time without shortening the life of your battery. Higher amp charging can shorten the life of you battery by as much as 10% of the expected life of the battery. Never charge immediately after driving...let the battery cool off...then charge. Heat is the enemy of a lithium ion battery. This cable works perfect right out of the box with my Honda Clarity.

Customer Survey Who Have Bought MEGEAR EV Charger

This works fine with my BMW I3, and we now get a full charge in about 5-6 hours as opposed to the previous 18-20 the factory charger took. Well worth the money of admission. Also, this plug Neme 10-50 could plug into my dryer outlet so I don’t have to install new outlet for 240volts outlet in my house that it saves my money for installation for new outlet. Economic choice!

Customer Survey Who Have Bought MEGEAR EV Charger

Purchased as replacement for my Ford C-Max Energi after accidentally damaging original cord. Actually like this better than what came with the vehicle. The cable has a heavier gauge extension cord, so it does not kink like the original one did. I'm very pleased with the item and ended up saving almost 450 dollars over what Ford wanted for a replacement cord. It works, saved money, and I feel is nicer than original, so in every way I am pleased with this purchase!

Customer Survey Who Have Bought MEGEAR EV Charger

We bought the NEMA6-20 plug with level 1 adapter unit. The product was shipped well and arrived as scheduled. A couple of key things we like over the factory supplied charger: The wall hook to easily wrap the cord around and the "gun" holder you stick the charger into while it is not charging in the car. It's light weight and smaller than our original charger. It is nice to be able to easily adapt to the charging outlets available. We charged on 110 until we bought the 220 outlet and it was a simple switch for us. That option was available on the factory charger. We are happy so far!

1.Check Your Socket Circuit Breaker or GFCI Socket

• Our EV Charger working current is 16A. Please check your breaker whether more than 16A. (18A, 20A, 30A .... is also OK)
• The good choice is the 18A or 20A circuit breaker. Otherwise, it will trip your breaker if the breaker max Amp is lower than 16A.

2.Check Your Socket Type Whether NEMA 6-20/ NEMA 5-15 / NEMA 5-20 And Check the Wire Gauge Of Socket

• The NEMA 6-20 plug can fit with NEMA 6-20 socket. The unit used with NEMA 5-15 adapter can fit with NEMA 5-15 / 5-20 socket.
• The way to check socket type is according to words was lettered in outlet or you can compare the outlet with our cartoon.
• DON’T use this charger if your socket wired with 16/3C or 18/3C cable.

3.Warning! Fully plug into your socket when using

• When using electric products, you need to fully plug into the socket so that metal plug fork can completely connect the socket.
• If not, it may burn out socket due to the bad connection.

Product description

NOTE: EV Charger is not included. This is an EV extension cord.



The Duosida Blue Premium Electric Vehicle Extension Cable is the perfect solution when you just need more length to charge your electric vehicle. At 25 feet long, this extension cable can help your charger reach a charging station a few parking spaces away or reach an outlet from your driveway. Our charger follows the SAE J1772 2010 standard and is compatible with any charger also following the standard.



Specifications:

- Length: 25 Feet

- Charging plug and extension socket meets SAE J1772 2010 standard and is UL Recognized E364477

- EV Cord is UL Listed E344326

- Supports up to 32-AMP 120-240V

• Easy-To-Use - A Male to Female Extension Cord. Simply plug your EV charging plug into this extension cord adapter to extend your current electric vehicle charger.
• More Reach – Adds an additional 25 feet to your current charger for extra length from your charging station to your electric vehicle.
• Supports up to 32 AMP - Works with both Level 1 and Level 2 charging stations.
• Good Compatibility - Designed to work with any charger following the SAE J1772 2010 standard. EV cord is UL Listed E364477.
• Storage / Carrying Case Included to easily transport or keep in your car. Sold and distributed by EZL Direct only with hassle free 1 year warranty.

User questions & answers

Question:	Will it work for 530e
Answer:	Yes
Question:	Will this work on my 2020 Prius prime
Answer:	Compre el mio para Rep.Dominicana y me funciona perfecto, esta desbloqueado para todo el mundo
Question:	Will this Work on a 2020 Prius prime
Answer:	256gb
Question:	Work on a Tesla Model Y
Answer:	Yes it works with Verizon I have Verizon and I simply placed my Sim card in it and it started working right away

Product description

NOTE: For use in North America. NOT for international use.

CHARGE 2 ELECTRIC VEHICLES. ONE STATION. ONE CIRCUIT. Double your vehicle charging capacity! The HCS-D40 is a 32 Amp, Level 2 hardwired station that can charge two vehicles simultaneously on one circuit. The HCS-D40 splits electricity between two vehicles: up to 16 Amps of electricity each when both are charging and up to 32 Amps when one vehicle is charging. It's installed on one 40 Amp circuit. The HCS-D40's power level is perfect for electric cars such as the BMW i3 and Honda Clarity EV.



ELECTRICAL SPECIFICATIONS

• ADVANCED - Double vehicle charging capacity without infrastructure upgrades
• FAST CHARGING - 7.7kW of power to charge two vehicles quickly
• CONVENIENT - Two 25’ charging cables for installation flexibility and superior vehicle reach
• DURABLE - Rugged, fully sealed NEMA 4 enclosure for installation indoors or outdoors
• RELIABLE - Backed by ClipperCreek’s best in class warranty and outstanding customer service.

User questions & answers

Question:	Is this evse WiFi enabled
Answer:	Yes
Question:	Is this available in a 40 amp version
Answer:	If I understand your question - Swipe upward from the bottom.
Question:	How do you monitor system for usage data
Answer:	What state in Naija?
Question:	Do you have the dual charging station with plug
Answer:	Yes you can use it you just have to call your phone company (at&t, T-Mobile, sprint, ext.) to activate that SIM card to your new phone. I purchased my IPhone 8 Plus from this seller and it is in perfect conditions works absolutely great! Would highly recommend!

• [FAST CHARGING] Now MOREC recommends you Level 2 32A, 220-240V EV Charger with NEMA 14-50 plug , which could charge your car 6x faster than other EV chargers you ever used. 26ft (7.9M) cable permits you to park your car 196 square meters around the oulet
• [PORTABILITY AND EASY OPERATION] When you are traveling or visiting relatives and friends, you don't have to worry about charging, because our chargers can be carried with the car and you can check every charging data by huge LCD screen on the charger. All you need is just a 220 V ~240 V NEMA 14-50 outlet to connect
• [HIGH SECURITY] Our EV charger adopts High Strength ABS material, which has better quality and high durability. Our chargers have over-current protection, over-voltage protection, under-voltage protection, leakage protection, overheating protection, waterproof rating of IP66 and other safety protection measures. They can secure your car charging
• [HIGH COMPATIBILITY] Unlike normal EV chargers, our EV chargers are compatible with most electric cars, which meet SAE J1772 standard. All of our products have passed CE certification and German TUV certification, and the quality is superior

User questions & answers

Question:	Installed correctly by licensed elec. But my 2015 Volt only seems to be charging at 13.5 amps. Why
Answer:	The reason is your Volt is the charger and that’s the highest amps at which it will charge. The amps is limited by the charger built into the car. So while this cable is capable of drawing more amps, the 2015 Chevy Volt will only draw 13.5 plus or minus. Looks like your limited to 8 or 12 (13.5) amps. The 2019s are upgraded with a charger that utilize the 32amps.
Question:	What is a normal charging temperature? Mine is reaching 125f at 30 amps
Answer:	Mine is showing 136f right now at 32 amps.
Question:	Is this charger as good as the factory charger for a 2019 Nissan Leaf Plus SL with the 62kw battery
Answer:	This is a level 2 charger, and like all such chargers, it is designed to be used with a 240 volt circuit. Note the NEMA 1450 plug. You will need an outlet similar to a dryer outlet to make this work. Most likely you will need an electrician to set up the wiring for you. Because it uses 240v, it charges several times faster than the one which comes standard with all Leafs.
Question:	Do you need an adapter to use on Tesla
Answer:	All public level 2 (220V) charging stations us the same universal SAE J1772 connector. That's what this Morec has. Regardless of whether or not your Tesla directly takes the SAE J1772, your Tesla came with an adapter so that you can use the universal SAE J1772.

Product features

Charging station for EV

This electric car charger is your reliable partner for fast charging of electric cars. NEMA14-50 sockets can be used in your garage or house. You can also charge at 7.68 kW at high speed and minimize your charging time.

FASTER CHARGING SPEEDS

Morec 32A 7.68KW EV Charger charges your vehicle 6×faster than a standard level 1 car charger, and it’s also easier to install and use on a NEMA14-50 outlet.

LED SCREEN

The state of charge, including current, power, temperature and charging time, is displayed on the station's large LCD display.

SAFE

Line of the internal circuit board is neat and tidy, there is a lot of space for modification, the line is fixed by screws, it is stable without any product safety hazard. Intelligent Chip Automatically repairing minor charging problems while charging. The screen would show the wrong which will help you to know the charging situation right now.

BETTER QUALITY

The IP rating reaches IP66, which is far more waterproof and dustproof than the average charger on the market, and can be used in cold winters at minus 30 degrees (but please do not place it under thunderstorm or heavy rain) The shell is made of high-strength ABS plastic, which has passed the rolling test and can bear the weight of a car.

Easy Installation

Our charger is ready to plug into any NEMA 14-50 outlet and comes with a 2-foot input cable.

When hiring an electrician, request that they install a NEMA 14-50 receptacle for the rating of your Charger.

Please try to replace the old NEMA14-50 OUTLET, the old equipment may cause poor contact and burn the socket and plug.

Check Your Socket Circuit Breaker or GFCI Socket

Our EV Charger working current is 32A. Please check your breaker whether more than 32A. (40A, 50A .... is also OK)

The good choice is the 40A or 50A circuit breaker. Otherwise, it will trip your breaker if the breaker max Amp is lower than 32A

Warning! Fully plug into your socket when using

When using electric products, you need to fully plug into the socket so that metal plug fork can completely connect the socket.

If not, it will burn out socket because the bad connection.

When the charger is not used for a long time, please unplug the power plug to extend the life of the charger.

• ✔ FAST CHARGING – Designed to make EV charging quick and effortless. Utilizing the standard J1772 charging protocol, this charging cable is compatible with all electric cars and plug-in hybrid. Compact and durable, it is the perfect charging cable for home use and with a 21ft cable that’s long enough for most driveways or garages.
• ✔ LEVEL 1 CHARGING – The EV Charger with NEMA 5-15 Plug by Lectron can be used as a Level 1 charger. Connect the charger to a standard outlet in your house and you can charge your vehicle with level 1 charging but connect the charger to a voltage transformer or a special outlet that produces 110V and you will be able to access level 1 charging.
• ✔ HIGH QUALITY: The UL-certified charging station is rugged and robust, equipped with overvoltage, overheat and overcurrent protection. The indicating light on the charging station helps to show the various stages of charging and to warn of possible errors.
• ✔ TECHNICAL SPECS – Input Power: 110V AC, Frequency: 60Hz, Maximum Current: 16A, Cable Length: 21ft (6.4m), Plug:NEMA 5-15, Weight: 2.1kg (4.6lbs), Operating Temp: -30C (-22F) to 50C (+122F)
• ✔ LECTRON 3-MONTH WARRANTY - If any of our products fail to meet your expectations, please get in touch with us and we will try to resolve the issue. If we can't resolve the problem to your satisfaction, you will get a full refund or replacement - no questions asked.

User questions & answers

Question:	Can I use this for my Tesla
Answer:	Yes you can use this as a trickle charger however the plug configuration is different so you will need an adapter.
Question:	Is this compatable with a 2016 Kia Soul
Answer:	Yes it is. We use it for ours
Question:	Is this compatable with 2016 Kia Soul
Answer:	Yes it is we use it for ours
Question:	Will the charger work on a bmw i8? thanks
Answer:	This is a J1772 connector. Very common, but I am not sure if that is the connector on an I8. By the way love the I8!

Product features

LECTRON 110V 16 Amp Level 1 EV Charger with 21ft (6.4m) Extension Cord J1772 Cable

16 Amp 21-Foot-Long Level 1 Electric Vehicle Charger

Making EV Ownership a Breeze

Electric Vehicles (EVs) are the future. We applaud you for being ahead of the pack by making a wise, pioneering investment. The Lectron EV Charger can make EV use way easier by supplementing your factory-issued charger. It produces a rapid-fire charge and has LED indicator lights that notify you of any charging errors.

√ Standard J1772 cable fit to most EVs

√ Level 1 charging capable

√ LED indicator lights to manage charging errors

√ 21-foot cable fit to most driveways

√ Damage-resistant

Compatibility

The NEMA 5-15 Plug supplied by Lectron has an input power of 110V. Attach the NEMA 5-15 Plug to a regular home-based outlet for Level 1 charging. The NEMA 6-20 and NEMA 10-30 plugs provide your vehicle with the Level 2 charging capability.

One Cable, All Vehicles

The J1772 charging protocol of this plug allows it to charge almost all electric cars and plug-in hybrid vehicles. It provides the users with shock protection and safety while charging in wet conditions. It is perfect for users that own more than one electric vehicles or buildings with docks for EV charging.

Avoid Errors, Manage Expectations

Keep an eye on the rapid-fire charging of this cable. The LED indicator lights on the charging cable show you where your car is across three different charging levels. It also alerts you if a fault is discovered, allowing you to step in before overcurrent, overvoltage, or overheating becomes an issue.

Compatible Models

BMW

BMW 5 Series 530e, BMW X5 xDrive40e, BMW i3

Ford

Ford C-Max Energi, Ford Fusion Energi

Chevrolet

Chevrolet Bolt EV, Chevrolet Volt

Other Models

Volkswagen e-Golf, Honda Clarity PHEV, Fiat 500e, Toyota Prius Prime PHV, Nissan Leaf

• [Large LCD and long cable] Large LCD to display all the car's data on the charging station during charging. You can see the state of charge, including current, voltage and temperature. The screws are fit into the box so you don't have to worry about the screen falling. The 6.1 m cable leaves enough space between your car and the charging station.
• Leak protection: the charging station has a leak protection type A. Charging under AC can ensure the charging station is safe. If you need to upgrade to a type B leak protection, you must install it yourself.
• [HIGH COMPATIBILITY] All our products are CE and TUV certified and the quality is trustworthy. Our EV charger is compatible with most electric vehicles.
• [Better quality materials]: The station uses aluminum alloy body and PC alloy plate to be stronger. And it reaches the IK collision protection level 10, which means it can carry the weight of the car.
• Warranty: We provide 1 year warranty (only for product quality problems)

User questions & answers

Question:	Does this plug into a Honda Clarity smoothly (without pushing really hard
Answer:	Greed
Question:	Can I see an installation manual for this
Answer:	Yes. It will work with any carrier. It is ‘fully unlocked. When you start the phone, setup will ask which carrier you will be using.
Question:	Do you have a 40 am version
Answer:	The only way to unlock this phone is to have THIS phone active on Cricket service for 6 months. Even if you keep the Cricket service active but switch phones, it will stop calculating your time. The phone and service must be active for 6 months and then Cricket will unlock the phone at no charge. Do not think you can get an unlock code or pay to have it unlocked third party either - they are scams.
Question:	Does the installation require a neutral wire or only two “hot” wires and a ground wire
Answer:	I did that and it works fine, but Amazon will still have it where you didnt sign up for the subscription... imma contact them to see if they can remove that prompt from my subscription tab under my account setting

Product features

Electric Vehicle Charging Station

This electric vehicle charging station is your reliable partner for fast EV charging. It can be installed in your garage, or anywhere in your home. With integrated over current and leakage current protections, it can be installed as a standalone unit and ensure your safety. Besides, 7.2kw power enables you to charge at a high speed and minimize your charging time.

INTELLIGENT CHIPS

Intelligent Chip Automatically repairing minor charging problems while charging. The error will be displayed directly on the display and will show normal charging after the error is fixed

SAFE

Machine welding, very precise, Line of the internal circuit board is neat and tidy, there is a lot of room for modification, the line is fixed by screws, and better heat dissipation effect

PROFESSION

With Type A RCD, our product can perfectly balance household appliances currents to ensure a steady current while the EV is charging, avoid potential security issues

EASY TO INSTALL

The charging station itself is small and light, and the heavy and awkward appearance is removed, so that it can be installed anywhere, the installation procedure is simple, and the novice can easily use it.

Easy Installation

Our charger is ready to plug into any NEMA 6-50 outlet and comes with a 2-foot input cable.

When hiring an electrician, request that they install a NEMA 6-50 receptacle for the rating of your Charger.

Please try to replace the old NEMA6-50 OUTLET, the old equipment may cause poor contact and burn the socket and plug.

Check Your Socket Circuit Breaker or GFCI Socket

Our EV Charger working current is 32A. Please check your breaker whether more than 32A. (40A, 50A .... is also OK)

The good choice is the 40A or 50A circuit breaker. Otherwise, it will trip your breaker if the breaker max Amp is lower than 32A

Warning! Fully plug into your socket when using

When using electric products, you need to fully plug into the socket so that metal plug fork can completely connect the socket.

If not, it will burn out socket because the bad connection.

When the charger is not used for a long time, please unplug the power plug to extend the life of the charger.

• ✔ FAST CHARGING - This product is designed to make EV charging quick and effortless. Compact and durable, it is the perfect charging cable for home use. Its 21ft cable is extra-long to fit most driveways or garages. The NEMA 14-50 Plug has an input power of 240V. You may attach it to a 240V outlet for Level 2 charging.
• ✔ ONE CABLE FITS ALL - Utilizing the standard J1772 charging protocol, this charging cable is compatible with all electric cars and plug-in hybrid vehicles. It is perfect for users who own more than one electric vehicle or buildings with docks for EV charging.
• ✔ LED INDICATOR LIGHTS - The LED indicator lights on the charging cable show you where your car is across three different charging levels. It alerts you if a fault is discovered, allowing you to manage the problem right away.
• ✔ BUILT TO LAST - The Lectron 240V 32 Amp Level 2 Electric Vehicle (EV) Charger with 21ft Extension Cord J1772 Cable and NEMA 14-50 Plug is made of high-grade, rugged materials which can last over long periods of time. It provides its users with shock protection and safety while charging in wet conditions.
• ✔ LECTRON 3-MONTH WARRANTY - If any of our products fail to meet your expectations, please get in touch with us and we will try to resolve the issue. If we can't resolve the problem to your satisfaction, you will get a full refund or replacement - no questions asked.

User questions & answers

Question:	Can I get a longer 30’ version
Answer:	Yes.
Question:	What is the function of the (+) and (-) buttons
Answer:	Me too! Everything in the post suggests it's a plus but in actual fact, it's a 7 only and I too will be returning. I also contacted them about it but because it's sold by BuySPRY and fulfilled by Spartan Technologies they tried to make out like I was the one in the wrong. Don't be fooled, just use another vendor.
Question:	does this charger work on 208 volts
Answer:	14. 4
Question:	Does this work on 2019 BMW 530e
Answer:	Yes

Product features

Hassle-free Charging for your EV

Electric Vehicles (EVs) are the future. We applaud you for being ahead of the pack by making a wise, pioneering investment. The Lectron EV Charger can make EV use way easier by supplementing your factory-issued charger. It produces a rapid-fire charge and has LED indicator lights that notify you of any charging errors.

✔ Standard J1772 cable fit to most EVs

✔ Level 2 charging capable

✔ LED indicator lights to manage charging errors

✔ 21ft cable fit to most driveways

✔ Damage-resistant

One Cable, All Vehicles

The J1772 charging protocol of this plug allows it to charge almost all electric cars and plug-in hybrid vehicles. It provides users with shock protection and safety while charging in wet conditions. It is perfect for users that own more than one electric vehicle or buildings with docks for EV charging.

Avoid Errors, Manage Expectations

Keep an eye on the rapid-fire charging of this cable. The LED indicator lights on the charging cable show you where your car is across three different charging levels. It also alerts you if a fault is discovered, allowing you to step in before overcurrent, overvoltage, or overheating becomes an issue.

Quick and Effortless EV Charging

Compact and durable, the Lectron EV Charger is perfect for home use. With a 21ft extra long charging cable, it can fit most driveways and garages. The NEMA 14-50 Plug has an input power of 240V. You may attach it to a 240V outlet for Level 2 charging.

Compatible Models

BMW

BMW 5 Series 530e, BMW X5 xDrive40e, BMW i3

Ford

Ford C-Max Energi, Ford Fusion Energi

Chevrolet

Chevrolet Bolt EV, Chevrolet Volt

Other Models

Volkswagen e-Golf, Honda Clarity PHEV, Fiat 500e, Toyota Prius Prime PHV, Nissan Leaf

Product description

All our product is sold by factory directly, reaching the highest quality standard. We warm welcome any suggestion of our product or service, we are pursing at doing better.

We would guarantee you a 100% customer satisfaction shopping experience on our store.



Tesla Charging Cable Holder Organizer is essential for our Tesla car owner.

It can not only protect the Charging interface from rainwater and dust, but also make our own Tesla garage/garden/parking lot/charging station clear.



Q: Does our cable organizer fit for your Tesla?

A: Sure! It customized design for Tesla Model Y Model S Model X Model 3 all series

Highly recommend to anyone who wants to mount Tesla connector, indoors or outdoors!



Charger Holder Superiority

｛#｝The wall mount hanger eliminates crimps, kinks & tangles of cable

｛#｝High strength plastic and structure can bear more weight and more durable

｛#｝Simple cable organizer make your garage more clean and neat



Application note

Easy to install, even at home.

This item holds Tesla charging cable only, not include the cable. That screws into the wall so you can leave the cable plugged into the wall outlet and keep the cable off the ground.

If the screws set are missing from the package, please contact us via Email, we will ship the missing parts ASAP.

How to get the charger out: There's a little hook, while gently lift and pull, it will come out easily.



Packing List

1 x Cable Organizer Bracket

2X Screws, 1X Wall Plugs



If you have any problem with your purchase, please CONTACT US FREELY via Email and we will always be here to serve for you.

• BEST PARTNER FOR CHARGER- Customized Design for Model Y Model S Model X Model 3. [Fit American Version Only]
• Improve Organization: This simple organizer is truly the perfect accessory for your Tesla charger. It is a simple addition that will have a huge impact to the outlook of your garage. Designed with the intention of keeping your space organized and to protect your Tesla Charger from damage.
• Simple Usage: Simple insert and click the Tesla charging nozzle. 10M long cables can be easily coiled up and hung on the holder. This charger holder make it more easy to store your not only your charging cable, but also other electrical cords
• Not Only protecting the Charging interface from rainwater and dust, But Also the charging cable could get protection on rainy or snowy day. A convenient wall-mount holder keep charging plug clean and tidy and reduced risk of tripping.
• Heavy Duty: ABS plastic is easy to clean and heavy duty so that you can use this organizer within years. The charger holder will securely hold the cable off the ground to prevent it from kinking and getting tangled, thus helping to extend the life of your Tesla Charger.

User questions & answers

Question:	Can this product be installed outside full-time? Is it weatherproof so that it will protect the Tesla charger from rain, snow, wind, storms, etc
Answer:	No it doesn't have the UL circle, I been using for over a month, it working great, doesn't overheat.
Question:	Can this item accommodate 24 feet wire of Tesla Wall charger
Answer:	Actually just one port support both QC3 and QC2. The others just regular 2.4 A ports.
Question:	How far does this extend out from the wall if the cable is plugged into the holder
Answer:	Yes
Question:	Does this comply with all charging specifications
Answer:	Yes, work no problem.

• √ STRONG AND DURABLE - Heavy duty combination with steel and plastic material can hold your EV Charger steady.
• √ STAY ORGANIZED - A convenient wall-mount ev charger holder to keep charging plug clean and tidy and reduced risk of tripping.
• √ FIT ALL J1772 PLUG - Highly recommend to anyone who want to mount standard J1772 type connector, indoors or outdoors!
• √ A SIMPLE DEVICE - Simple insert and click the EV charging nozzle. 25M long cables can be easily coiled up and hung on the deep J hook.
• √ INSTALLATION IS A CINCH - Drill the holes and mount with 6 wall screws (M5*35) and secure it in place.

User questions & answers

Question:	Will this work for the new Audi etron
Answer:	Yes.It is compatible with Razor Rx200.
Question:	Can this plug into an rv outlet
Answer:	Green usually means the battery is finished charging.
Question:	What size drill bit should I use for a concrete wall? Or the screws can be used directly to drill into the wall
Answer:	It will only work with what eletric wheeler we have the razor brand this works well. As far a lithium i can’t answer. Should though
Question:	What's the exact distance between the screw holes? Need to know if it would fit the existing holes drilled for my previous holster
Answer:	You need to ensure the charging voltage and terminal type of your scooter. This charger is for charging a 36v battery with a 5.5mm/2.5mm connector. If that is what your scooter is it will work. The 5.5/2.5 plug is standard, if it looks like it will fit it should, but you need to ensure your battery is a 36v battery. If it’s a 24v battery it will overcharge and damage the battery and possibly cause a fire hazard. If it’s a 48v battery it will not charge it much more than 25% before it thinks the battery is charged.

Product features

BougeRV HEAVY DUTY SAE J1772 Plug Holder/Holster

• Made from high quality steel. This unit is extremely durable.
• Rainproof lip on the top to offer your ev charger best protection.
• EV charger cables can be easily coiled up for improved storage.
• The flat part of the holder has dull edges, it will not harm ytour charger cable.

COMPATIBILITY

This SAE J1772 EV charger holster is designed for indoor and outdoor use and fit almost all weather conditions.

SIMPLE INSTALLATIONS

Six M5*35 screws are intended for wood surfaces or drywall. Insert your EV charger into the dock until it clicks into place.

MUTIPLE PROTECTION

It prevents snow from accumulating and hardening in the plug, making charging difficult in winter and protects against insects in summer.