13 best brake bleeders

• Easy Usage: Easily bleed brakes by yourself. Hand vacuum pump is easy to bleed your car brakes.
• Convenient Carrying: Portable kit which includes different adapters designed for all vehicles is suitable for both home and business applications.
• Widely Use: 4 tubes of different length to cover different needs.
• Vacuum Gauge: Equipped with vacuum gauge, convenient readout of pressure, Pressure range: 0-30inches Hg, 0-760mm Hg.
• Carry Case : Made by high quality material, durable and rugged, Contained in a case for easy transportation and storage.

User questions & answers

Question:	What is the inner diameter of the tubing
Answer:	As best as I can remember the clear tubing ID is 3/16" But the many attachments are different sizes.
Question:	How much the reservoir jar can hold? Thanks
Answer:	The top mark reads 4 1/2 oz. Or 130 ml. With about 1/4 to 3/8 of an inch left to completely full.
Question:	None of the three piece adapters which came with the kit fit my car. Even the smallest is too big
Answer:	Try taking some tie wraps on the tubing that goes around the zerk fittings or try ace hardware and see if they can match the size you need. Auto parts store don’t really have a good selection of tubing
Question:	Is the product and it's seals oil resistant? I need to bleed out hydraulic lines. They are the same size as brake lines
Answer:	This is a complete piece of crap. It literally fell to bits the first time I used it. Don’t buy it.

Product features

Vacuum Hoses

4 tubes of different length to cover different needs

Multifunctional: Universal fit for all makes and models of vehicles including motorcycle brake bleeding.

EPE Material Shockproof

It is portable:All the tools and accessories are centrally put on a built-in plastic foam tool case .Even though fiercely jolted,it won’t be damaged

Reusable

High quality alloy steel, plastic and rubber, strong and durable.

It held vacuum, was able to pull all the old fluid out, as well as all the air out of my clutch lines after I replaced it with new brake fluid

Product Features

Easily bleed brakes and test automotive vacuum systems by yourself

•Works on all vehicle makes and models

•The hand operated pump pulls the fluid through the bleed nipple, eliminating need to use the brake lever or pedal

•Manual pump with pressure gauge allows testing of many vacuum operated systems, eg. fuel pumps, carbs, etc

• ITEM SPECIFICATIONS: This Brake Fluid Bleeder uses a standard workshop air supply and features a working pressure of 71-113 PSI with a maximum pressure of 113 PSI.
• CONVENIENCE: Our 1L Vacuum Brake Fluid Bleeder features a convenient hanging hook and locking trigger that allows for hands free operation.
• TRANSPARENCY: The transparent drain hose allows you to visually inspect the old fluid during the draining process. You can easily flush your entire disc or drum brake system with this brake fluid bleeder!
• RELIABLE | EFFECTIVE | EFFICIENT: Users trust ARES to be quality tools. You are backed by our Performance Assurance. If you have any issues with your ARES 1L Vacuum Brake Fluid Bleeder, simply contact customer service for troubleshooting help, parts, replacement, or refund. Need a manual? Download it for free on our website!
• ASPCA BUSINESS AMBASSADOR: We are proud to be part of the ASPCA Business Ambassador Program. If you have a pet, you realize they are more than a pet, they are part of the family. With your support, we’re proud to help this great organization.

User questions & answers

Question:	I bought this tool and i need to know what adapter do i need for a 2016 ford explorer
Answer:	If you are simply using the stock brake bleeder valve then you will not need any additional tools.
Question:	Does this require a separate pressure source? or pumping the container provide both the reqd pressure and the reservoir of back fill fluid
Answer:	No separate pressure source is needed. It pressurizes and refills the master cylinder as you bleed the brakes.
Question:	Is it okay use it if the compressor provides more than 113 psi
Answer:	I added a pressure gauge and a valve so I can regulate the pressure.I use it on my Harley-Davidson at about 50 lbs . Worked great.Hope that helps
Question:	Is there an adapter for sixth gen 2017 camaro
Answer:	Adapters are on their website. There are not many. All you need is the right cap to fit your brake fluid reservoir so an adapter from any manufacturer can be made to work with a little craftmanship (connect the hose). I bought the Dodge cap for a Motive bleeder and cut the hose and made it work.

Product features

Easy To Use

Just attach the transparent drain hose to the bleeder, then attach the supply line to the brake fluid bleeder handle. Press the brake fluid bleeder handle and hold until all fluid has been drained or use the hold open snap to keep handle held down hands-free. Repeat the process for each wheel until all fluid has been drained. Then add fresh brake fluid to the master cylinder reservoir, and use the brake fluid bleeder to draw the new fluid into the brake system until all air bubbles are out. It's that easy to flush your entire brake system by yourself!

Convenient Design

Thanks to the locking trigger on the handle, you can use this brake fluid bleeder system totally hands-free, so it's easy to change out your brake fluid on your own. And thanks to the transparent hose, you'll always be able to closely monitor your brake fluid as it's removed and replaced.

Product description

Brake bleeder works by using compressed air for the built-in venturi system and produces a vacuum to bleed and flush the hydraulic brakes and clutches. Set includes 1 piece of 40-inch silicone hose with universal rubber adapter. Designed to fit most vehicle rake oil bleeder fittings and use with most standard and ABS brake systems.

• Designed to drain most standard and ABS brake systems
• Bleeds and flushes hydraulic brakes and clutches with vacuum
• Features integrated silencer for quieter work
• Helps prevent spills and messes
• Set includes 1 piece of 40-inch silicon hose with universal rubber adapter

User questions & answers

Question:	Is this capable of getting trapped air out from calipers? A lot of times hand vacuum cant get trapped air out
Answer:	It usually will if it's just trapped air. If there is a clogged bleeder screw orifice then that will still need to be cleaned out and if there is a blockage in the line it sometimes needs a little help from the pedal but both of those situations are rare.
Question:	Can this be used with a small compressor? no scfm or cfm on description
Answer:	It sort of gives min cfm (2) / psi (40) in the pictures of the product. Smaller compressor should be ok, but will take a little longer, since you will need to wait for it to catch up every so often. I've used this with a 4 gal Makita compressor and had to do each wheel with about 5-6 pauses: run it for 15 seconds, stop, wait 30-60 seconds for the compressor to catch up, run another 15 seconds.
Question:	I have a 92 gmc sierra 4x4 half ton pickup, is there a silicon hose that fits my master cylinder lid? how’s it hook to my reservoir
Answer:	The unit doesnt hook to the master cylinder, it hooks to the brake bleeder screw at the drum or caliper and vacuum pulls fluid down from the Master Cylinder through the brake system and out the bleeder. The YouTube Video on it, mentions pulling old fluid out of the Master Cylinder, but that is simply inserting the hose in the master cylinder and vacumming the old out like a straw in a cup.
Question:	How is this for motorcycle brakes
Answer:	I have used this on both my BMW F650GS and on my 1982 Honda CB900C. My brother in law used it on his ST1300. It was probably the best bleed job on both clutch and brakes we have used.

• The material of mirror is pressureproof stalinite
• Equipped with vacuum gauge, easy to read out the pressure, Pressure range: 0-30in Hg, 0-760 mm Hg.
• Handheld vacuum pump is easy to bleed your car brakes by yourself.
• Easy to store and protect the tester
• Includes different adapters for all vehicles

User questions & answers

Question:	Can you push or pump fluid with this tool? I need to push brake fluid into the master cylinder from downstream
Answer:	Suitable for inspecting vacuum-driven components in cars and trucks, including pre-distribution mechanism, heating and board, PCV and EGR valves, front door and exchange regulators, release brake fluid pumping unit, replacement of car/motorcycle brakes Oil.The joint is suitable for all automotive braking systems and measures vacuum pressure.
Question:	Can i use this tool to bleed the brakes on a dirtbike
Answer:	Yes you can. I just bled the brakes on my son’s ZX6R.
Question:	Is the tube 1/2 inner diameter or 1/2 outer diameter
Answer:	I assume you mean the plunger tube. If so, it is 1/2 inch inner diameter.
Question:	can this be used to test seals on two cycle engine weedeater
Answer:	No, it can't.The tool kit only used for cars.

Product features

Storage Tank-120ml

Storage jar with liquid transfer cover

Adapters

L-Type Brake bleed valve Adapter*3

Straight cone Adapter*2

Barbed straight pipe joint*1

Barbed T hose connector*1

Instrument: Clear Reading and High Accuracy

The surface of the product is anti-rust, corrosion-resistant, durable and has a long service life Copper barrel, strong and durable, metal shell with good toughness, easy to read

Rich connector configuration

Multiple conversion joints made of rubber, including T-shaped hose joints, straight hose joints, brake exhaust valve joints, and conical hose joints. The smooth and tough surface of the adapters is suitable for all automobile braking systems.

Test Parts

4 different lengths of vacuum hoses to meet the different needs of the car. Applicable models: Brake fluid replacement for various fuel cars and motorcycles

Suitable Models: Cars and Motorcycles

A single person can easily control this manual vacuum pump to test the vacuum of the car.

Also used as household vacuum sealer to seal food jar,ball jar and vacuum bay.

• Widely Use: The kit includes different adapters designed for all vehicles. suitable for both home and business applications.
• Convenient: Hand Held vacuum pump is easy to bleed your car brakes.
• Test Gauge: Cushioned pistol grip handle with vacuum gauge, simple operation, gauge range 0-30 inches Hg, 0-760 mm Hg.
• Storage Case: Made by high quality material, durable and rugged, Contained in a blow mold case for easy transportation and storage.
• Tips: Do not use the vacuum pump to siphon liquid Damage to the internal chamber will result in seals.

User questions & answers

Question:	Can i bleed my clutch with this
Answer:	We think so if the nozzle fit to your cluch, Please check it carefully before purchase.
Question:	How high a vaccum will this pull? Not how high the gauge goes
Answer:	If you get a good seal, it pulls probably 25" hg So not a perfect vacuum but pretty close
Question:	Will this fit a 2014 Chevrolet Corvette
Answer:	It fits basically anything with a bleeder. Something that new has anti-lock brakes though, so bleed it then go for a spin and slam the brakes so the abs goes off, then bleed them again.
Question:	Where can I buy a replacement plastic canister to catch the liquids? Or the size of the o-ring to the plastic canister lid
Answer:	Sorry maybe not... But we have another bigger kit with 2 containers you may want. ASIN: B085ZF1TS7

• IMPORT CARS - Made to fit all cars with 45mm threaded hydraulic fluid reservoir caps. Also fits some GM clutches
• HEAVY-DUTY - Corrosion-proof materials and design ensures power bleeder to be maintenance free for years of service
• PORTABLE - Built-in hand pump allows use anywhere from the home, shop, or track. The easy to pressurize system allows for one-person operation
• FLUSH AND BLEED - The 2 quart pressure tank holds enough fluid for a complete system flush. Precision pressure gauge ensures safe and effective operation
• KIT INCLUDES - Everything needed for a hydraulic brake fluid job - pressure tank, hand pump, gauge, 1100 adapter, gasket and hose

User questions & answers

Question:	Hi, just ordered the pump to be use on my 92 964. A youtube video of a 964 brake fluid replacement reference your item. Does this work on
Answer:	I believe the 964 is essentially a 911, correct? If thats the case then yes it will fit on the fluid reservoir. Just to be certain you could contact Motive products directly for further information. Motive also has a "European Black label" which may be the one you need. Again, this one fits most European cars, but the 911 (964) Porsche could be different. I got this one for my 99 VW Passat, which amazon states does not fit, but it does.
Question:	Anyone notice blue grease leaking on the bottom of the pump shaft-the part that makes contact with the brake fluid? Is that normal
Answer:	Mine came like this too and I simply wiped off the extra grease but I also decided I'm only going to use this to put pressure into the brake system and simply keep filling the reservoir in the car. Another reason I rather not use this with brake fluid is because I'll be using this on different cars with incompatible brake fluid. I can't imagine cleaning this in between. Just going to be extra careful to make sure I don't completely drain the cars reservoir.
Question:	Will this work with a 2015 Audi A3? Can you change adapters to work with other cars (e.g. 2015 Stingray
Answer:	As long as your car has a resivoir for fluid and the company has the proper cap adapter for your vehicle then yes it will work. Let them know what vehicles you have and buy the correct caps to fit and it should work for both.
Question:	Will this fit an e46 2002 m
Answer:	Yup, this fits all BMW vehicles. I've used it on both a 2004 3 series and a 2005 MINI Cooper.

Product description

Contain the mess of bleeding brakes with this easy to use kit. Fluid is captured in a large capacity 16 oz. bottle to help keep your driveway or garage floor clean! The removable cap has a built-in fitting to secure the hose during storage helping to prevent fluid leaks and spills after the job is done. Kit is suitable for multiple use on most automotive brake systems.

• Magnet retainer and a one way check valve built-in for one person brake bleeding
• 16 ounce fluid capacity
• 12" long flexible hose fits over most bleeder valves
• Helps prevent unwanted air from entering system during bleeding process

User questions & answers

Question:	What size is the hose i/d
Answer:	I'm guessing the inside diameter is about 1/16", expanding well beyond 1/8". Basically, for a standard auto brake nipple.
Question:	What keeps air from going through the threads on bleeder screw when releasing pedal
Answer:	if you have a crumby bleeder screw and brake calipers that has a lot of high tolerance in between the threads then some air can get thru the threads. just don't unscrew the bleeds screw/zerk all that much. you can tell if the threads were cut with a crappy tap on the caliper when you get brake fluid to also leak around on the threads. I know that the FJ cruisers have that issue from personal experience, but haven't really had a hard time with while brake bleeding other vehicles.
Question:	How does the check valve work
Answer:	There is no check valve. You put some brake fluid in the container slightly over the level of the tube that extends to the bottom of the inside of the container. When you pump the brakes, it will then only suck up brake fluid and not air. It actually works very well. Keep an eye on your brake fluid level at the master cylinder!
Question:	Is it supposed to weep out brake fluid out of the top while your bleeding brakes? Mine does between the black plastic nipple and the red cap
Answer:	The black plastic nipple is a vent to relieve pressure as the bottle fills with fluid forced in through the center hose. I usually empty the bottle when it's about half full so brake fluid never gets near the vent. This bottle has been used extensively and I have yet to see any fluid weep around the vent.I hope this helps.

Product features

Allstar Performance

Specialty items for the Shop, Trailer, and Track. The Allstar Performance brand offers thousands of hard-to-find, specialty items that cover many segments in the performance aftermarket. For over 25 years, customers worldwide have come to rely on the quality, affordable and practical items available from Allstar Performance.

Brake Bleeder Bottles

Contain the mess of bleeding brakes by capturing fluid in this 16 oz. bottle with a 12" long hose which attaches to most bleeder screws. The removable cap has a built-in fitting to secure the hose during storage to help prevent spills. Choose from a Steel lanyard retainer that suspends the bottle from a chassis or suspension component or a magnet retainer to secure the bottle to a Steel object such as a brake drum or rotor during bleeding. ALL11017 has a magnet retainer and a one way check valve built in for one person brake bleeding.

Product description

🛠**About Thorstone** 16PCS Hand Held Vacuum Pump Tester & Brake Bleeder Tool Kit

2-in-1 kit:Hand Vacuum Pump Turner Tester and Brake Clutch Bleeder Tool

This kit can be widely used for testing vehicle's vacuum systems

such as Computerized Engine Control Devices, Ignition Control Devices, Air Condition and some others.

Few mins after pumping, observe the gauge pointer drop or not, to confirm if there is a leak in the vacuum system.

The accessories in the set can meet the needs of different models.



One-man Operation Design:

There are 3 sizes brake bleeder valve adapters, choose the closest size to ensure a tight fit, squeeze the handle manually to generate negative pressure in the braking system and then suck out the waste oil and air.

Bleed master cylinder first if necessary, then wheel cylinders and calipers in succession, beginning with the wheel closest to the master cylinder and progressing to the one farthest from it. Remember to watch your reservoir level while pumping.



8⃣**Set include**

1 × Vacuum Pump / Brake Bleeder

1 × Drainage Vessel

1 × Hose Connection Lid

1 × Sealed Lid

2 × 24" Vacuum Hose

2 × 3" Vacuum Hose

2 × Cone Hose Adapter

1 × Straight Hose Adapter

1 × "T" Hose Adapter

3 × Brake Vent Valve Adapter(3 Sizes)

1 × Universal Cup Lid Adapter

1 × User Manual

1 × Carrying Case

• 🚖As Brake Bleeding Kit: This one-man manual brake bleeding kit could be used on brake and clutch wheel cylinder/caliper, master or slave cylinder. to flush old brake fluid and air, and guide the new fluid to fill the whole brake system. Also they can help to pump out the power steering fluid.
• 🚖As Vacuum Pump Tester: a hand pump with vacuum gauge,could be widely used in testing vehicle's vacuum systems/household kitchen vacuum sealer to seal food jar, ball jar and vacuum bag.
• 🚖Compatible with: Fit for bike,motorcycle,car,truck,pickup, or any other vehicles that use standard brake bleed valves
• 🚖Premium Material: made of pressureproof stalinite which is much stronger than normal material and more durable. Alloy and copper for ultimate anti-rust performance.
• 🚖After-sales service: If there's any question about this product, feel free to contact us, we'll give you an exact answer within 24h.

User questions & answers

Question:	Does it come with some manual
Answer:	no!! there is no manual.

Product description

If you do mechanic work, you probably already know something about bleeding brakes. And one thing you’ve definitely learned over the years is that brake bleeding can be a cumbersome and time-consuming process – particularly for certain vehicles and especially for ABS. Which is why you may be surprised to find out there’s a tool that can make bleeding brakes fast and easy – and oh, we should also mention: extremely simple. It’s called the Phoenix V-5 Light Duty DIY Reverse Brake Bleeder, and we’re certain it’ll change the way you think about brake bleeding. With the Phoenix V-5, one man can bleed the brakes on any vehicle in 10 minutes or less – even if it’s a tough ABS job (you won’t need a scan tool or special clips). Tip: Our Patented Reverse Bleed Technology is what makes this tool so unique. The Phoenix V-5 Reverse Brake Bleeder is a revolutionary tool based on an incredibly obvious concept: Air wants to go up. That’s it. Traditional brake bleeding tools and techniques fight this principle. At Phoenix, we harness it, so you can quickly remove all the air from the whole braking system. Reverse bleeding: It’s an idea so simply and obviously right that most people ask, Why didn’t anyone think of that before?

• Patented Reverse Bleeding removes more trapped air than any other brake bleeder by simply pushing Brake Fluid fluid from the bottom up.
• Reverse bleeding is the only method capable of bleeding tough ABS units without a scan tool.
• Allows you to refill and bleed a completely dry brake or clutch system. Perform Reverse, Vacuum, Pressure and Bench bleeding all with the same tool.
• The V-5 is considered a Light Duty tool for intermittent use. Compatible with DOT 3, 4 and 5.1 brake fluid. (most vehicles use DOT 3 or 4).
• Is the easiest one-person bleeder you will ever use. No more asking your family or friends to help you finish a brake job.

User questions & answers

Question:	My harley tanks dot 5 brake fluid. will this work on my bike? let me know. thanks
Answer:	You can use the V5 with DOT 5, however you should clean it by pumping denatured alcohol through the tool immediately after use. When left in the tool DOT 5 can lead to a sticking plunger.Also, we don't recommend changing from a DOT 5 to a DOT 3,4 or 5.1 without first consulting the OEM guidelines for your vehicle. This is because DOT 5 is silicon based and DOT 3,4 and 5.1 are all glycol based.
Question:	In the diagram, the fluid that is pushed out is pushed into a sort of box, where do I get this
Answer:	I believe the 'box' you are referring to is the master cylinder which is part of the car where the brake fluid is stored.
Question:	This comes with the clear hose and plastic botle for Fluid
Answer:	Clear hose yes. Plastic bottle for fluid no.
Question:	Will this kit do all 3 types of bleeding in the diagrams
Answer:	This kit does exactly what it says...you can either use the vacuum approach and pull from the fluid reservoir to bleed screws or from new fluid container through bleed screw to the fluid reservoir.

Product features

Bleeding brakes is a fast one-man job when you put air to work for you

So we sent our patented tool to Stacey David of Gearz TV. Stacey knows all about all kinds of vehicles – he works on off-road four wheel drives to hot rod street trucks to ATVs.

Stacey tried out the V-5 at his garage, and this is what he said:

'The Phoenix V-5 DIY brake bleeder will put an end to those ‘white knuckle’ panic stops. With the V-5, in a few short minutes, you'll have the best, firmest pedal that you can get – and it's something one guy can do. It’ll make your life a whole lot easier, just like a good tool is supposed to.'

The V-5 is a brilliant commonsense solution to the age-old challenge of brake bleeding. It allows one person to achieve the best possible pedal.

The V-5 Light Duty Brake Bleeder is Capable of Reverse, Vacuum, Pressure and Bench Brake Bleeding

Often time air gets trapped in a brake component or a bend in a brake line. Traditional pumping of the brake or clutch pedal may not be enough to remove all of the trapped air leaving you with diminished stopping power. We recommend using a combination of Reverse, Vacuum, Pressure and even Bench bleeding when needed to remove all trapped air.

The V-5 Light Duty Brake Bleeder is Capable of Reverse, Vacuum, Pressure and Bench Brake Bleeding

Often time air gets trapped in a brake component or a bend in a brake line. Traditional pumping of the brake or clutch pedal may not be enough to remove all of the trapped air leaving you with diminished stopping power. We recommend using a combination of Reverse, Vacuum, Pressure and even Bench bleeding when needed to remove all trapped air.

The V-5 Light Duty Brake Bleeder is Capable of Reverse, Vacuum, Pressure and Bench Brake Bleeding

Often time air gets trapped in a brake component or a bend in a brake line. Traditional pumping of the brake or clutch pedal may not be enough to remove all of the trapped air leaving you with diminished stopping power. We recommend using a combination of Reverse, Vacuum, Pressure and even Bench bleeding when needed to remove all trapped air.

The V-5 Light Duty Brake Bleeder is Capable of Reverse, Vacuum, Pressure and Bench Brake Bleeding

Often time air gets trapped in a brake component or a bend in a brake line. Traditional pumping of the brake or clutch pedal may not be enough to remove all of the trapped air leaving you with diminished stopping power. We recommend using a combination of Reverse, Vacuum, Pressure and even Bench bleeding when needed to remove all trapped air.

• 【One Man Operation】This brake bleeder bleeds and flushes hydraulic brakes and clutches with a vacuum and is simple to use. Large capacity collection reservoir can contain 2 liters of fluid, also includes an automatic master cylinder refill kit with a 1 liter reservoir (safety cup), which makes changing brake oil easy and simple for one man operation.
• 【2 Silicon Bleed Hoses】The brake oil bleeder kit includes a 40 inch silicone bleed hose with a universal rubber adapter that used with most standard and ABS brake systems, and a 40 inch master cylinder evacuation hose especially for bleeding brake in master cylinder.
• 【Efficiently to Bleeding Work】It contains a variable thumb throttle which maintains average air flow rate 2 cfm and a desired brake fluid flow rate. And the fixing ring lock keeps extracting oil continuously, efficiently and quicker.
• 【Quieter Work】 Built-in Integrated silencer allows the brake fluid to flow quietly through the silicone hose and makes a messy job cleaner, quicker and quieter.
• 【Convenient & After Sales】Midget size of the N.W is less than 1 kg makes it easy and convenient to operate and carry even for women. And If there is some problem with our products while you receive it, pls feel free to contact us, we will do our best for your satisfaction.

User questions & answers

Question:	Does the vacuum brake bleeder unit's air need to be fed with tool oil? There is not one note in the instructons or on the box
Answer:	Air tool oil not required for the product.
Question:	Is the top removable, to drain used fluid
Answer:	Yes
Question:	Would a pancake compressor be enough to operate this? I'm only using it for motorcycles
Answer:	Needs a lot of air to operate properly. I tried a similar similar compressor as you have and my twin 60 gallon 5 hp compressor and the small compressor cannot keep up to work properly. Need upright 60 gallon compressor to keep up with the air supply.
Question:	Why this kit equipped with two hose
Answer:	Two hoses are more convenient. The master cylinder evacuation hose with extension thinner corrosion-resistant tube bleeds brake fluid more cleaner. And you don’t have to exchange the thinner tube for the rubber adapter when you bleed the oil in calipers.

Product features

Prevent Air Entering

The refilling bottle is an upgraded design which keeps the reservoir filled all the time and avoid air entering, forming a vacuum during the procedure.

One More Hose

40” silicon hose with extension thinner corrosion-resistant tube is used alone to extract all the old brake fluid from the master cylinder, without replacing the same tube back and forth.

Efficiently One-Person Work

Bleed and flush hydraulic brakes and clutches with vacuum efficiently. Provide with fixing ring lock to control air and keep extracting oil continuously.

Universal Auto Repair Tool

With universal rubber adapter, our vacuum brake fluid bleeder works with most standard and ABS brake systems. Midget size of the N.W is less than 1 kg. Easy and convenient to operate and carry.

Product description

OEMTOOLS offer an outstanding One-Man Brake Bleeder Kit. This OEMTOOLS Bleed-O-Matic Kit features a strong magnet that firmly holds the bleeder bottle to the body of any vehicle, making it ideal for use without assistance! The OEMTOOLS Kit includes fluid collection bottle, a set of hoses and special tapered fittings.

From the Manufacturer

The OEMTOOLS Adjustable Brake Cylinder Hone is a full-range hone covering sizes from 13/16 In. to 2-1/4 In. The knurled nut controls the pressure and tension for faster and smoother removal of deposits and corrosion in brake and all types of cylinders and to produce the proper finish for the new seals to seat against. Features a flexible shaft and spring-loaded legs for easy use right on the car with any variable speed electric drill. It hones clear to the end in step-cut and blind end cylinders.

• 2 Piece Design for Strength and Durability
• Plastic Bottle Collects Discharge Fluid
• Designed for Use On Calipers, Wheel Cylinders and Master Cylinders
• Ideal for Use without Assistance
• Features Strong Magnet to Hold Bleeder Bottle to Vehicle Body

User questions & answers

Question:	One way valve in the bottle - or not? If not, cant see much use for it over an old bottle or jar! Thanks in advance
Answer:	It’s prob the same using a bottle. I purchased a vac pump which is more convenient
Question:	What should the correct placement of the bottle be, above or below the level ofthe bleeder valve? The instructions don't show or mention it
Answer:	If you are planning on using this as a 'one-man' bleeder, as long as the hose loops ABOVE the bleed screw on your caliper, it should work. However, it is FAR easier to have two people and use this product solely as a collection system for the waste fluid.
Question:	Can you have different hose sizes
Answer:	This kit comes with one size hose that will not press fit onto the bleeder screw itself. Instead it comes with a tapered adapter that you connect the hose and then push the tapered adapter into the bleed screw til its in tight.
Question:	Can I do drum brakes with this
Answer:	Yes. You can do any brakes. Actually a jar and a piece of clear plastic tube works fine.

Product features

Bleeds Brakes Effectively

The OEMTOOLS 25036 Bleed-O-Matic One-Man Brake Bleeder Kit is a 2 piece design that is made to collect discharge fluid and for use on calipers, wheel cylinders and master cylinders. It features a strong magnet to hold the bleeder bottle to the vehicle body, making the task easier and allowing no spill.

• This brake clutch oil change tool is good at exchanging brake clutch fluid, power steering oil, engine oil and any other fluid. Use 90-100PSI shop air to form negative pressure in the brake system, sucks out waste oil and air, and guide the new oil to fill all the system.
• Pour the new brake oil into the master cylinder, connect the black cone nipple to the brake bleeder valve, connect the compressor to the 1/4" air quick plug. Open the air compressor, wait a few mins until clean fluid comes out without bubbles, close the air compressor and turn to the next brake, until changing the brake oil for all the wheels, check the pressure of the pedal.
• One man operated brake fluid replacement tool, easy and simple. You do not need to press the pedal back and forth, or need other's help, and you will not stain the floor too. Please note, you need to seal the drain screw on the bottom of the collection bottle by Teflon tape, and during the bleeding one by one, you need keep filling new fluid into reservoir to avoid it from empty and air leaks in.
• YSTOOL brake oil extractor kit has a 340ml waste oil collection bottle, a lid assembly with ball valve, 1/4" NPT European style air quick plug and a 80" long hose. There are a elbow black rubber cone suction nipple and a dark green plastic cone nipple for you to choose. This pneumatic bleeder tool is widely suitable for most vehicles, such as sedan, motorcycle, truck, SUV, etc.
• Convenient pneumatic brake bleeding tool, save you from sitting there to manually pump by hand pump or press the pedal back and forth by traditional bleeding method. Also we supply 1 year warranty, please feel free to purchase. Please contact us by Amazon message system if there is any question, we will reply in 24 hours

User questions & answers

Question:	Will a small 1.5 hp 150max psi pancake air compressor run this
Answer:	Hi, this tool needs 90-100psi, please make sure your air compressor has a vacuum function.

Product description

This is the original Mityvac hand vacuum pump kit used by service professionals worldwide for performing hundreds of automotive diagnostic and mechanical tests and for one-person brake bleeding. The MV8000 kit contains our most popular Selectline hand vacuum pump with vacuum gauge and accessories. Durable and sturdy material offers longevity.

• Package Dimensions: 12 L x 2.25 H x 9.75 W (inches)
• Package Weight : 1.5 pounds
• Country of Origin : China
• Part number: MV8000

User questions & answers

Question:	Can this be also used to generate pressure for tests
Answer:	Yes. The kit comes with a very detailed booklet on how to run different tests.
Question:	Does it come with a case or something to store it in
Answer:	It comes in a plastic tray, it can be stored in the tray. If I were going to frequently use the tester I would buy a storage case.
Question:	I'm using this to make water boil, would this vacuum pump be sufficient enough to get the pressure low enough
Answer:	No it would not. In addition to not generating enough vacuum, the flaws in this device would not hold the vacuum pressure long enough for the water to boil.
Question:	Could I also use this (with a longer hose) to siphon the gas out of my broke down car, so that I can put in my new car
Answer:	I wouldn't. Two reasons: One, this pump moves a small volume of fluid. Good for bleeding brakes but moving gallons would take a long time and you would have to empty the small container many times. Two, the tubing and container are all plastic and I'm not sure if they would react with gasoline or not. Plus, there would be a lot of combustible fumes escaping. Could be dangerous.Modern gas doesn't last long without stabilizers in it, so if it has been in the car long, it isn't worth recovering. If you have to, marine supply stores have rubber bulbs for priming fuel lines. They can be used to safely start a fuel siphon.

Product features

Additional Information

Mityvac is a brand of vacuum-related automotive diagnostic and service repair tools since 1971. Beginning with the design and patent of a single hand-held vacuum pump intended for medical applications, its uses broadened to include automotive diagnostics and service as well as industrial and consumer applications.

The Mityvac MV8000 is a powerful kit that allows a single user to vacuum bleed their clutch and brakes for cars and trucks. The vacuum pump (MV8010) is an extremely versatile service tool that can be used to test a variety of automotive systems and perform a number of useful tasks.

Though the pump has obvious uses for testing various vacuum motors, control valves and vacuum sources, its applications don’t end there. Almost any part or system that requires proper sealing vacuum to operate can be tested with the vacuum pump.

The pump and its accessories also transfer fluids, help to bleed brakes and clutches and aid in other tasks. The pump also meets diagnostic tool requirements when such tools are specified for some state vehicle inspection

programs.