13 best performance tool steering wheels

Product description

Performance Tool W80651 Steering Wheel Remover Set includes SAE and metric threaded bolts for vehicles with 4-Inch hubs. Includes puller legs for late model applications.

• SAE and Metric threaded bolts for vehicles with 4-Inch hubs
• Includes puller legs for late model applications
• For removing steering wheels

User questions & answers

Question:	Would this tool remove pivot bolt on 1987 buick regal grandnational tilt steering column
Answer:	I am pretty sure as this worked on my 1987 Pontiac Fiero GT.
Question:	Is the proper one for a 1994 Chevrolet Silverado
Answer:	Yes but be very careful and use penetrating oil. I went through 3 of these when I was doing my 88 Cherokee, while trying to fusr the one thing. They break if you haven't researched your stuff much
Question:	My steering shaft bolt is 1/2 inch fine (20) thread, which is the size I need to remove the lock plate - does this kit have that size
Answer:	Hi, i really do not know, but it worked with mustang 1996 and Lexus LS 400 steering. Best regards
Question:	Will this work on 2016 Jeep Wrangler
Answer:	It would work on vehicles with a 4" hub.

Product description

Removes steering wheel lock plate for most vehicles with tilt and telescoping columns. Designed for air bag equipped vehicles. Sizes: 9/16 inch x 18 millimeters and M14 x 1.5 millimeters adapters.

• Removes steering wheel lock plate for most vehicles with tilt and telescoping columns
• Designed for air bag equipped vehicles
• Sizes: 9/16" x 18mm and M14 x 1.5mm adapters

Product description

Disc Brake Piston Tool Rotates The Piston Back On Gm And Ford Vehicles Equipped With Rear Wheel Disc Brakes. Use in conjunction with a 3/8" drive ratchet. Not for use with air or impact tools.

• Sizes: 2 1/8" & 1 7/8".
• Disc brake piston tool rotates the piston back on GM and Ford vehicles equipped with rear wheel disc brakes.
• Use in conjunction with a 3/8" drive ratchet.
• Not for use with air or impact tools.

Product description

Performance Tool W134DB 4-Piece 3 Jaw Gear Puller Set made of heat treated alloy steel, drop forged for strength, with a chrome plated finish. Sizes 3, 4, 5, and 6-Inch.

• Heat treated alloy steel
• Drop forged for strength
• Chrome plated finish
• Sizes: 3, 4, 6 and 8"

User questions & answers

Question:	add says 2/3 jaw with a picture of the threaded head for 2 or 3. other place of ad it says 3 jaw. what is it 2/3 0r 3 jaw
Answer:	It is a 3 jaw.
Question:	need puller that reaches at least 8-1/2 inches, what do you have
Answer:	I don’t think it will.
Question:	What is the size of that black screw? Exact size
Answer:	17mm - Metric
Question:	Can this be used for pulling pulley and bearings
Answer:	YES, IF the pulley is not wider or deeper than the puller capabilities

Product description

Performance tool W84603 GM Door Spring Tool, Safely removes and installs door springs on most GM cars and trucks.

• Use with 1/2" wrench or socket.
• Safely removes and installs door springs on most GM cars and trucks.
• Alloy steel construction.
• Lifetime Warranty

User questions & answers

Question:	Will this work on to remove the window crank/knob on my 2007 kia spectra
Answer:	Well what it is is it's about a spring compressor for a spring that is heavy duty and approximately 4 in long and about 1 in and with.I do not know anything about the specs on a Kia but the spring that it removed for me was from a 1998 Chevrolet pickup truck full size. I do not know if this helps you but it is very hard to give you a best answer when I do not know what it is you are a working with. Sorry anything you're cracking up should just have some sort of pin or clip that you should be able to get out but I don't know anything about Kia.
Question:	Will this work on 2006 silverado truck
Answer:	This is a spring compressor. It worked fine on the 1998 Chevy S10 that I got it for. It should work for the door hinge springs on your Silverado PU.
Question:	Does anyone know if the door spring compression tool work on a 1967 Ford Mustang door spring
Answer:	Yes it is made to compress springs for removing and replacing springs . Works well have used mine couple times
Question:	how far do the jaws open
Answer:	I don't have exact numbers, but you can substitute a longer bolt (make sure it's a hardened grade bolt) to get more opening. I used it on a Chevy S10 door spring.

Product description

Performance Tool W83017 Wheel Stud Pilot Pin Set Wheel stud pilot pins are designed to easily remove and install wheels on many European vehicles that use screw in lug bolts Set includes four pairs of metric threaded stud pins that allow you to hang the wheel. No need to balance the wheel on the small lip of the hub or in one hand This helps prevent the wheel from falling and causing damage or injury Includes 2ea of following sizes; 12mm x 1.25, 12mm x 1.5, 14mm x 1.25, and 14mm x 1.5 Models include Audi, BMW, VW, Mercedes and Porsche using the 14mm. Fiat, Dodge, and Chrysler using 12mm.

• Wheel stud pilot pins are designed to easily remove and install wheels on many European vehicles that use screw in lug bolts.
• Set includes four pairs of metric threaded stud pins that allow you to hang the wheel. No need to balance the wheel on the small lip of the hub or in one hand.
• This helps prevent the wheel from falling and causing damage or injury.
• Includes 2ea of following sizes
• 12mm x 1.25, 12mm x 1.5, 14mm x 1.25, and 14mm x 1.5

User questions & answers

Question:	Do these sockets have a protective insert for the front of a lug as say a spark plug socket has a rubber insert
Answer:	Yes, it is hard plastic, but I need to remove the outer sleeve for it to fit my Foose wheels. If I would have known, I would've just used a regular thin-wall socket & saved the price of this part. Unless you have extra-long lugnuts, the tops of them will never touch the inside back of the socket anyway. The sides of the lugnuts are what need protection. To install, I hold the lugnut inside a ziplock bag & push it into the socket. I then fold the bag back over the outside of the socket to protect the wheel, before threading it onto the lug. Obviously, similar procedure for removal. I change the bag when it starts to rip, usually after 2 or 3 nuts, sometimes more, sometimes less. It's not perfect, but it greatly minimizes damage, & my lugnuts are hand-painted & baked with matching-color caliper paint. Between the bag & the paint layer, it's a real nice snug fit. BTW though, I never allow, or myself use, impact tools on my wheels. I hand torque with a TEKTON 24340 wrench to my vehicle's('16 Camaro) specs of 140ft/lbs.
Question:	can someone provide me with an outside diameter of the 21 mm socket without the plastic coating
Answer:	Without the plastic sleeve it is 1-1/8" diameter.
Question:	How can I replace a broken socket under warranty
Answer:	This is a special thin wall socket for alloy rims. It is not capable of high torque. Lugs nuts are 90/100 foot pounds on these wheels no air tools should ever be used. I would would buy another one and be more careful. I am not aware of a warranty on this type of tool. I have one but never saw a warranty notice from the manufacturer.
Question:	The top of this has a plastic cover - how do you get it out of that cover? Says "cut" but the plastic is too thick to cut with scissors/boxcutter etc
Answer:	You can pull the plastic cover off with your hand using a twisting motion and it will come right off

Product description

Installs pulleys without damage to pump by exerting force only through the shaft. For use on most Ford power steering pump pulleys.

• Installs pulleys without damage to pump by exerting force only through the shaft
• For use on most Ford power steering pump pulleys
• Early model Chrysler, VW, GM, and Ford with 3/8”-16 threaded internal pulley shafts

User questions & answers

Question:	will this work on a 98 dodge intrepid
Answer:	yes if the pulley is pressed on. 1st you will need to use a pulley puller to remove the pulley then use this item to reinstall the pulley.
Question:	Will this work on a 2003 taurus
Answer:	You will have to see if it is threaded on the inside of the power steering pump shaft. It worked on my 70 cougar
Question:	Is this supposed to be universal? it says it works for my chevy truck but clearly says ford on the package
Answer:	Fits most pwer steering pumps with 3/8 x 16 threaded internal pulley shafts.
Question:	Is the thread pitch m 8 x 1 25 ? The part that screws into the pump
Answer:	No, according to my measurement gauge, it's SAE 16 pitch x .75" long.It's 3/8" in diameter, and package says it's for Ford pulleys. Hope this helps.

Product description

For use on 1985 to current F-250 and F-350 rear axles with high shear axle nuts and Dana 80 rear axles. Center tube aligns wrench to nut. Heavy duty chrome vanadium alloy steel construction.

• For use on 1985 to current F-250 and F-350 rear axles with high shear axle nuts and Dana 80 rear axles
• Center tube aligns wrench to nut
• Heavy duty chrome vanadium alloy steel construction

User questions & answers

Question:	Does this fit front spindle nuts on a 1994 Ford Ranger dana
Answer:	It's does not come with bits, this is a torch wrench that measures the amount of torch you put on bolts as they are tightened.
Question:	Will this work on my 1996 f-250 7.3 old body style? 4x4 with 4.10s
Answer:	The one I received is 80.
Question:	Outer diameter
Answer:	The overall length of my 3/8 drive wrench is 10-1/2 inches.
Question:	Is this only for Toyota's? I've been looking all over for a wrench for 4wd 77 chevy
Answer:	Yes, you divide the inch-lb number by 12 to get ft-lbs.

Product description

Performance Tool W89708 Pulley Puller / Installer Kit for most alternator and power steering pulleys. Includes power steering line disconnect tool and bilingual instructions. Replacement parts are available.

• For most alternator and power steering pulleys
• Includes power steering line disconnect tool
• Bilingual instructions
• Replacement part availability

User questions & answers

Question:	Is this a substitute for #W
Answer:	Yes, I did 2 GM p/s pumps this week with the W89708.
Question:	Will it fit a chevy monte carlo
Answer:	If you mean a 1987 or earlier Monte Carlo, it will most definitely fit some parts, such as the power steering pulley. I used it on more than one small block Chevy. If you're asking about a 1989 or later fwd Monte, I'm not sure.
Question:	Can’t I just find a bolt with the same threads, a washer or 2 and a nut
Answer:	Yes you can I tried it one time and it worked
Question:	Will this going to work on 06 ford ranger
Answer:	yes it will

Product description

Anti-marring design prevents damage to vehicle paint, upholstery, chrome or finish. Set contains five unique tools for removing internal and external trim and molding fasteners red in color.

• Tools for removing internal and external trim and molding fasteners
• Anti-marring design prevents damage to vehicle paint, upholstery, chrome or finish
• Designed to prevent damage to surface
• 5 piece kit
• Color: red

User questions & answers

Question:	where is it made
Answer:	Sorry for the delay. Packaging shows that the item was made in China.
Question:	I need a tool for removing the push down fasteners (91503-SZ3-003 ) on an acura rdx front/rear bumper. Will this tool work
Answer:	Saw a picture of those push pins and yes this tool will work wonders with those particular pins and many others. I work in a shop and use them all the time well worth the 10$
Question:	It does NOT say Wilmar anywhere on the packaging or on the tool itself
Answer:	I have not kept the packaging, so I can not respond on that. The tool does have the model # embossed in the metal. This model # W86556 does agree with the stated model. The tool is either an extremely good copy (made in China...but China's build quality has improved greatly) or is the genuine article, as it matches the photos and description on http://www.wilmarcorp.com/item.aspx?iid=6672.Hope this helps!
Question:	Will this tool work on push in plastic fasteners found on rzr side by side
Answer:	this tool is for push in fasteners. everyone answering "YES" doesnt realize that that is not what is on a polaris rzr. the real answer, as im sure you discovered by now, is NO.

Product features

Save Time & Money Using The Right Tool

Push pins and trim clips are great at doing their intended job, but without the right tool they can cause massive headaches when trying to remove them or damage to the clip or vehicle. In seconds you can easily removes plastic anchors without damage, Just squeeze pliers to pop clips out. Our pliers feature a spring loaded design to enable you to remove clip style fasteners with a simple squeeze of the handle. If you have to safely remove those pesky clips; this is the tool for you!

5pc Composite Trim Removal Tool Set

• Five unique tools for removing internal and external trim and molding fasteners.
• Works great for Automotive , Marine , or Aircraft Trim Removal including Door Panels , Moldings , Window Trims , Clips , Fasteners , Emblems , Panels , Radios , ect.
• Nice set to have around the Garage when Working on Removing Dash and Door Panels and those Hard to Pry into Area
• Non-Scratch: Strong yet Gentle so No More Scratching or Damaging your Vehicle

Door Spring Compressor Tool For GM Cars and Light Trucks

• Safely And Easily compresses the door hinge spring on GM (General Motors) cars and light trucks for quick removal and installation.
• Deep Reach design will remove the door hinge spring from both GM (General Motors) B-body cars and light trucks.
• Less Hassle when removing dangerous and stubborn door hinge springs.
• Spring Compression Rod can tightened and loosened with a 1/2" (Half Inch) wrench.

Windshield Glass Removal Tool with with Tempered Steel Blade

• This tool is a good accessory for you to repair or remove car windshield adhesive caulking faster and safer.C
• uts the sealant around windows with specially designed tempered steel bladeP
• ull handle provides additional leverage K
• nurled handle provides firm grip

W83201 10-in-1 Trim Tool

• A must have for every auto glass installer
• Handy tool that does many of the jobs you normally have to do with a variety of other more expensive tools
• Special trim tool makes it easier and faster to remove interior panels, molding, clips and more
• 10 functions for a variety of interior components

Product description

Performance Tool, Leverage works for you. For removal of grease and oil seals. Two tip sizes accommodate many applications. Large easy grip handle with heavy duty chrome plated shaft.

• Leverage works for you.
• For removal of grease and oil seals.
• Two tip sizes accommodate many applications.
• Large easy grip handle with heavy duty chrome plated shaft.

User questions & answers

Question:	Will this work on 05 Gmc Envoy xl flywheel
Answer:	flywheel???? if you have to ask this then I suggest you have your car repaired at a shop.......
Question:	can this tool be used to remove pinion oil seal
Answer:	yes it is the right tool for that job.
Question:	Does this work for neoprene or only rope seals
Answer:	It may work on neoprene but it is intended for rope seals. Good luck.

Product description

2 9/16-inch 6 point rounded socket for use on 1990 through 1993 Dodge trucks with Dana 60 manual hubs.

• Size: 2-3/8" 6 pt rounded socket, 1/2 Drive
• For use on 1990 through 1993 Dodge trucks with Dana 60 manual hubs
• Durable build quality
• Specially designed and makes wheel bearing locknuts easy to remove or install

User questions & answers

Question:	is this a half inch drive
Answer:	Yes this is 1/2" drive
Question:	Will this work for the 2008 dodge
Answer:	Not sure what you are using it for but I used it to remove a cap from oil bath boat trailer bearings. I do not believe you can use it with an impact wrench but I used a breaker bar and extender and it worked fine.
Question:	Is this 2 9/16" or 2 3/8"? Title and description do not match
Answer:	It is a 2 9 16 for axle nut 2002 dodge 3500 works great
Question:	Will it fit auto locking hubs on a 94 ranger
Answer:	i used it on a 94 explorer with locking hubs and it worked

Product description

Emergency lug nut removal set works to remove lug nuts and locking lug nuts, if the lug nut key is misplaced, lost or lug nuts are worn, stripped or damaged. Heavy duty impact-grade steel will not split or crack

• Size: 3/4" lug nut remover socket
• Remove lug nuts and locking lug nuts
• Heavy duty impact-grade steel will not split or crack
• For when the lug nut key is misplaced, lost or lug nuts are worn, stripped or damaged
• Use to remove lug nuts & locking lug nuts, if the lug nut key is misplaced, lost or lug nuts are worn, stripped or damaged

User questions & answers

Question:	Will these work on a 2018 Nissan Sentra
Answer:	Didn't work at all go to a local tire shop they will pull your locks off in a matter of minutes like 20 bucks 4 all 4 locks
Question:	Will this remove 19 mm lug nuts
Answer:	I don't believe it will. It's too big. Also, beware that with this threaded style, once you get the lug nut off, it is very difficult to get the extracted bolt out of this device.
Question:	So, for real- what's the secret to getting the lug out so I can use the socket again
Answer:	Once you have the lug nut turning, but before you remove it all the way from the lug, use an extension on the socket to "lever" it from side to side to loosen it. Sometimes it will need a few taps on the side as well to convince it to leave the lug nut behind on the stud, but it's the easiest way overall.
Question:	does these fit my mazda 2004 v 6 and do i have to use breaker bar with it
Answer:	Hello Noel, this tool has two set of sockets, one from 17 to 18 mm and the other one from 19 to 21, I'm sure either one would fit to your Mazda.You will need a power tool, either air or electric (impact) for better results.

Product features

Performance Tool W5 SAE Breakdown Lug Wrench

Full size lug wrench breaks down into two parts for compact storage.