12 best camco boats

Product description

With Camco's DIY Boat Winterizer you can quickly and efficiently winterize inboard/outboard marine engines. The Do-It-Yourself winterizer allows flushing and preparation of boat engines for winter storage with just five gallons of antifreeze (sold separately) and your flusher. You save time and money season after season. It is great for technicians too. If using a front mounted raw water pump system, use Camco's Flush Adapter (sold separately).

• Perfect for Boat Winterization: This gravity flow system flushes, prepares and protects your boat engine for winter storage
• Compatibility: For inboard and outboard engines
• Kit Includes: Antifreeze tank with on/off valve, ball valve, winterizing tee and reinforced, clear hose with fittings
• Provides Enhanced Antifreeze Flow: High-flow, 5/8-inch hose with brass fittings improves the antifreeze flow to your engine
• Features: A reinforced clear hose for improved kink resistance
• Easy to Use: Requires only antifreeze and your flusher (not included); Uses 5-gallons of antifreeze (only use antifreeze approved for engine winterization)

User questions & answers

Question:	Do I need any special ear muffs?The one I have only has one hose attachment
Answer:	We used the type that feeds water to both sides and found that holding them together with a bunggie cord/strap wrapped around them to keep them tight to the leg worked best. P.S. It took a long time for the thermostat to open allowing a full flow of water. We kept feeling the water temp to make sure that the thermostat was open. We then turned the water valve off and the RV antifreeze valve open. When there was about 1/8th to 1/4 0f the antifreeze left we fogged the engine until it stalled out. Once we knew/found out how to keep the muffs tight it was a very simple operation. Stan & Terry
Question:	I bought the boat winterizing kit. The tank has a hole in it. Can I buy just the tank
Answer:	Goop is good for sealing flexible things like that. A fresh tube thats not too thick is easier than old one.
Question:	How long is the clear plastic hose that is included in the kit
Answer:	The clear plastic hose (with water hose fittings) on the kit I purchased is 8 feet 3 inches long. Hope that helps.
Question:	Do I still have to remove and replace the drain plugs in my Mercruiser 350 MPI prior to flushing for winterization or does this eliminate that step
Answer:	If you follow instructions closely, you shouldn't have to remove drain plugs. You are supposed to run on muffs until the engine is up to temp and the T-Stat is opened up, then turn on the pink stuff and let it flow through COMPLETELY. I go past the point of just seeing antifreeze come out the exhaust, I dump the whole tank in since I will have to toss it anyway. If you don't do these steps completely, you could leave pockets of water in the system that freeze. Draining first would be added insurance against making a costly mistake. I prefer this method over draining alone because it's going to catch things gravity doesn't and residual water will at least mix with AF if it doesn't get completely blown out.

Product description

The Camco Dual Flow Motor Flusher helps properly maintain your boat's engine by flushing out contaminates. It allows you to run fresh water through your engine's cooling system. Simply connect the flusher to a standard garden hose to clear out salt and mineral build-up that could jeopardize your engine's ability to operate to its fullest capacity. The flusher's dual input design allows enhanced flow through the engine. Great for boat winterization. It is compatible with most outboards and sterndrives.

• Flushes contaminates out of the engine
• Dual input design enables better flow through the engine
• Connects to any standard garden hose
• Compatible with most outboards and sterndrives
• Great for boat winterization

User questions & answers

Question:	Will this work on a Merc
Answer:	It should be universal. I’ve personally got a Yamaha 150. But it slides right on.
Question:	Does this work on smaller outboards like a 50HP yamaha
Answer:	Should work, might not feel as tightly as a bigger outdrive but none of them are watertight II begin with they're going to leak a little but just as long as it's pumping water into the engine you're good
Question:	Will it work on 40hp mercury
Answer:	Works on my Volvo Penta SX,that's all I can say
Question:	what are the dimensions from fork end to water inlet
Answer:	From the U to the water outlet holes in the middle of the cups is 8 3/4"

Product description

The Boat Cover Support is an easy to use telescoping support system that keeps your boat cover from sagging and allowing water to pool. When rain doesn't pool and go stagnant in your boat cover, it helps extend the life of the material. The Boat Cover Support is self-standing with support plates on the top and bottom, the bottom support plate also has a foam pad to prevent sliding and protect the boat. The Boat Cover Support adjusts heights easily from 30" to 50" in 2.5" increments to accommodate different styles of boats. The nylon strap assembly is 50-ft long and fits most boats up to 22 feet in length. It is easy to install and stores compactly when not in use. Camco also makes a full line of attachments that can be purchased and used with the telescoping support pole.

• Helps prevent water from pooling in low places on boat cover
• Helps maintain the quality of your boat cover
• Height adjusts 30" to 50" to fit different boat styles
• Fits most boats up to 22 feet long
• Easy to install

User questions & answers

Question:	Will this fit a 24 foot open bow ski boat
Answer:	No it would not. Our boat is 15’ and the cover fits perfectly.
Question:	Will this work with a 10’ pelican predator Jon boat
Answer:	Yes
Question:	Can you buy the support plate separately
Answer:	No, this item comes as an assembly.
Question:	I have a monterey 214fs with extended platform total overall length 23ft. will this work
Answer:	I have a Monterey 18fs and I really like how this fits, I have tried everything before and this is the only product that has worked for me. I can tell you there are probably 4-5 feet more of strap to go, but with the platform is where I still have doubts. I’d recommend you to buy it, if it doesn’t fit, return it, it’s worth the try. Good luck!

Product description

Cameo's Pontoon Boat Cover Support is an easy-to-use telescoping support system that keeps your pontoon boat cover from sagging and allowing water to pool. When rain doesn't pool and go stagnant in your boat cover, it helps extend the life of the material. The Pontoon Boat Cover Supports are self-standing with support plates on the tops and bottoms. The bottom support plates have foam pads to protect the boat and prevent shifting. The Pontoon Boat Cover Supports adjust height easily from 30" to 50" in 2. 5" increments and contains two 33' long straps with durable hooks. Each polyester strap assembly is 33'-34' long and fits most pontoon boats with up to a 33' deck length. It is easy to install and stores compactly when not in use.

• Helps prevent water from pooling in low places on boat cover and helps maintain the quality of your boat cover
• Comes with supports, 33’ straps with hooks and a bonus boat hook. All supports are self-standing with support plates on the tops and bottoms. The bottom support plates have foam pads to protect the boat and prevent shifting. Each polyester strap assembly is 33'-34' long and fits most pontoon boats with up to a 33' deck length.
• Height adjusts 30" to 50" in 2. 5" increments
• Fits most pontoon boats with up to 33' deck length
• Easy to install

Product description

Easily get to those hard to reach areas on your RV, boat, home, and more with Camco's adjustable-length multi-purpose handles. They feature and ergonomic tear-drop design for comfortable use. Anodized aluminum construction resists rusting and the TPE hand grip gives you a secure and comfortable grip.Automotive Part Type : Trailer Accessory

• Adjustable 5' - 9' length
• Ergonomic tear-drop design
• Easily wash higer areas on your RV, boat, home, etc.
• Anodized aluminum construction
• TPE hand grip

User questions & answers

Question:	Does this pole come with the hook and does it float? It does not specify in the description. Thanks
Answer:	Take the old o-ring off and try to match it at an auto parts store for a replacement, they have a pretty good selection of sizes for things like auto AC systems.
Question:	Does this work with the Camco 41922 Brush Attachment
Answer:	I just purchased this replacement hose for the spot clean pro heat pet machine. The smaller black hose that you thread through the machine is very short. I was able to attach it, but just barely. I am hoping it holds up, but have my doubts. I thought it was worth the chance vs. buying a whole new machine that has the same defect with the hose breaking.
Question:	What is the purpose of the 3 prong hook on the end that is removable where the brushes attach
Answer:	Yes, I bought it for my very very old little green machine I believe its 1400-5. Fit perfectly... :)
Question:	Which heads fit this pole? All I have are screw type and not sure I want to change
Answer:	Yes; I used this part to replace the cracked hose on my Bissell Little Green ProHeat. My machine is the older variety, with the clear hose and gray transparent tanks. This new hose fit perfectly.

Product features

Telescoping Brush Handle

The Camco Telescoping Brush Handles easily attach to any of our wash brush heads, and come in four different sizes for your convenience. Telescoping brush handles make it easy to get those hard to reach areas of your RV, boat or home. The handle is teardrop shaped, lending increased rigidity over conventional round handles and a more ergonomic design for ease of use. Handles are constructed of anodized aluminum, which resists corrosion. It features a TPE hand grip that gives you a secure and comfortable grip.

How it Works

Place the wash brush head on the top of the handle by aligning the peg with the hole, using the push button to lock the head in place. Adjust the telescoping handle to the length needed by pressing the button found at the top of the handle when the handle is fully compressed. Hold down the button and extend the handle to one of its four locked positions and release button to secure the handle in that position. Your telescoping brush handle will stay securely locked into the chosen length while in use. When you are done using it, simply compress the handle for easy storage.

About Camco Manufacturing

Camco started in 1966 with one employee and one product. Today, over 40 years later, we have more than 350 employees, over 3,000 products and multiple manufacturing facilities in the USA and across the globe.

Competitive pricing, superior service, quality products and customer satisfaction are the foundations upon which Camco operates. Our friendly, knowledgeable customer service staff stands ready to assist our customers with any questions. At Camco, we take pride in meeting the ever changing demands of a challenging marketplace while serving you, our most valuable asset.

Product description

Camco’s RV Cabinet Mount Trash Can is perfect for tight spaces in an RV. The trash can features a swing-top lid and measures 13-inches tall x 8.5-inches wide x 5-inches depth. It mounts inside your cabinet to help save space and stay in place while traveling. Easy to install, it can be screwed directly to your cabinet or wall or be mounted with a durable, double-sided adhesive. Installation hardware and double-sided adhesive are included.

• Perfect for tight spaces in an RV
• Mounts inside your cabinet to help save space; stays in place while traveling
• Measures 13-inches tall x 8.5-inches wide x 5-inches depth
• Features a swing-top lid
• Easy to install; installation hardware and double-sided adhesive are included included

User questions & answers

Question:	Can someone recommend a trash bag brand and size that works well with these
Answer:	I use Kroger gallon size plastic bags, 10"X14". I have to slightly stretch the top of the plastic bag over the top edges, not enough to tear but just enough to get a nice smooth lining. It does not get a lot of use so I do not have to change the bag very often.
Question:	Instead of using screws to stick it on a wall can I use sticky adhesive pads? I don't want to put holes in the walls
Answer:	I'd imagine it would work but probably more as a temporary use rather than one time use via screws . Adhesive tape pending on brand will probably give away after time
Question:	Does the top remove at the flange? If so, it looks like it could be overfilled and then trash would spill over when the lid is removed
Answer:	Yes, it does.
Question:	can this be used without the lid
Answer:	Yes. The can itself is what mounts. The lid is removable and can be used without if that's what you want.

Product features

Camco Cabinet Mount Trash Can | Perfect for Tight Spaces in an RV, Boat, Apartment, Dorm Room or Tiny House, Measures 13" x 8.5" (43962)

Camco’s RV Cabinet Mount Trash Can is perfect for tight spaces in an RV. The trash can features a swing-top lid and measures 13-inches tall x 8.5-inches wide x 5-inches deep. It mounts inside your cabinet to help save space and stay in place while traveling. Easy to install, it can be screwed directly to your cabinet or wall or be mounted with a durable, double-sided adhesive. Installation hardware and double-sided adhesive are included.

• Perfect for tight spaces in an RV
• Features a swing-top lid
• Easy to Clean: Cleans easily with soap and water

Product description

The Camco PowerGrip Marine Power Cord, 30 Amp Locking Male x 30 Amp Locking Female, 35 Foot is designed to provide you with the necessary length to power your boat from distant power outlets. Extremely flexible in design, it is coated with a heavy-duty flame retardant, heat resistant PVC sheath that serves as protection from the outdoor elements, wear and tear. The power cord features a marine-style 30-amp male (NEMA L5-30P) and a marine-style 30-amp female (NEMA L5-30R) locking connectors. Rated for 125 volts/3750 watts and constructed with 100% copper, 10-gauge wires for superior conductivity. The threaded locking rings create a weatherproof connection, ensuring further moisture protection during outdoor use. The power cord comes equipped with an adjustable cord organizer and a carrying strap handle that makes toting and storing simple after each use.

• Extended Length: Extends 35 feet long, providing the necessary length to power your boat at distant power sources.
• Flexible, Safe and Durable Construction: Power cord is extremely flexible. Coated with a heavy-duty flame retardant, heat resistant PVC sheath that serves as protection from wear and tear, as well as outdoor elements. Cord is yellow in color for high visibility and will not scuff or mar boat deck.
• High Conductivity: Features a marine-style 30-amp male (NEMA L5-30P) and a marine-style 30-amp female (NEMA L5-30R) locking connectors. Rated for 125 volts/3750 watts. Constructed with 100% copper, 10-gauge wires for superior conductivity.
• Weatherproof Protection: The threaded locking ring feature creates a weatherproof connection, ensuring further moisture protection during outdoor use.
• Simple Transporting and Organized Storage: Comes equipped with an adjustable cord organizer and carrying strap handle that makes toting and storing simple after each use.

User questions & answers

Question:	Does this come with the locking couplers
Answer:	It comes with the locking rings.
Question:	Is there a reason you couldn’t just buy 2 12’ cords if you needed a 25’ and save the
Answer:	Not sure but it sounds like a good idea. Wish I would have thought if that..
Question:	yes i have marinco male/female cord, and need toknow if your cord will work with my male plug #6365crn 125v/250v marinco
Answer:	This is compatible with Marinco, plugs.
Question:	Is this cord 10 gauge
Answer:	This is made from 10 gauge wire.

Product features

Camco PowerGrip Marine Power Cord, 30-Amp Locking Male x 30-Amp Locking Female, 35 Foot (55612)

The Camco PowerGrip Power Cord allows you to add sufficient length (35 additional feet) needed to reach distant power outlets. Simply attach the power cord directly to your boat's marine-style 30-amp female connector and plug the marine-style 30-amp male end to the power source at your marina. When finished, unplug both connecting ends and use the adjustable cord organizer to bound the cord. The attached carrying strap makes the extension cord easy to carry. Can also be used to extend an existing power cord.

A Heavy-Duty Extension Cord That is Built to Last

The power cord features a sleek design. Both extremely flexible and durable, the power cord is constructed with 100% copper,10-gauge wires for superior conductivity. The cord is coated with a heavy-duty flame retardant, heat resistant PVC sheath that serves as protection from the outdoor elements, wear and tear.

Features NEMA L5-30P & NEMA L5-30R connections and is rated for 125 volts/3750 watts. The power cord includes a threaded locking ring to create a weatherproof connection.

High Conductivity

Features a marine-style 30-amp male (NEMA L5-30P) and a marine-style 30-amp female (NEMA L5-30R) locking connectors. Rated for 125 volts/3750 watts. Constructed with 100% copper, 10-gauge wires for superior conductivity.

Weatherproof Connection

The PowerGrip handle eliminates frustration by assisting users in safely and conveniently gripping, plugging, and unplugging the male and female ends without straining or damaging the cord.

Flexible, Safe and Durable Construction

Power cord is extremely flexible. Coated with a heavy-duty flame retardant, heat resistant PVC sheath that serves as protection from wear and tear, as well as outdoor elements. Cord is yellow in color for high visibility and will not scuff or mar boat deck.

Simple Transporting and Organized Storage

Comes equipped with an adjustable cord organizer and carrying strap handle that makes toting and storing simple after each use.

About Camco Manufacturing

Camco proudly manufactures many of our 4,000+ products in 5 facilities across the United States, including items from flagship brands like RhinoFLEX, TastePURE, TST, Currituck, and FasTen.

Product description

The Kuuma Stow N' Go 125 premium stainless steel grill is a compact grill that offers quality construction and convenient portability. Its compact size is perfect for when space is at a premium. Stow N' Go grills can be easily transported and can also be mounted to any Kuuma rail, rod, or pedestal mount. The grill's dimensions are 20" x 11.25" x 11" with a cooking surface 125 square inches and a heat output of 9000 BTU/hr. Designed for high pressure propane - disposable or larger refillable tanks. Included regulator has 1" - 20 throwaway cylinder threads. Constructed of 300 series marine grade stainless steel.

• 125 square inch cooking surface with a heat output of 9000 BTU/hr
• Constructed of 300 series marine grade stainless steel and comes fully assembled
• Regulator has 1 inch to 20 inch throwaway cylinder threads
• Can be easily mounted to any Kuuma rail, rod, or pedestal mount
• Measures 20" x 11.25" x 11"

User questions & answers

Question:	How big is the drip pan. Is it sufficient to hold the drippings for something that has lots of drippings
Answer:	No it has a hole in it and I guess you might be able to fix something to catch the drippings but we hang ours over the side of the boat and any drippings go in the water. Then we store it in a plastic container for if it leaks or drips once put up.
Question:	Please tell me. can i hook up a big 15.0 lbs. refillable propane tank to this grill
Answer:	My brother has a grill similar with propane and he had to buy an adapter to use the refillable propane tanks
Question:	Can you use any kuuma rod mount for this grill
Answer:	Hi Jhutch,Some of the older model rod mounts may not work with this grill. We make several new mounts that will work with this grill. Part numbers are as follows:58180 - 60 Degree Rod Holder Mount58181 - Direct Above Rail Grill Mount58182 - Indoor/Outdoor Rail Mount58183 - Universal Single Axis Rail Grill Mount58184 - Pedestal Grill Mount
Question:	I am looking for a grill that will allow for slower cooking of tri tip (lid closed med heat) etc. not just searing steaks. is there room
Answer:	We live on our boat and this is our 2nd Kuuma grill - we use it a lot more than most people and have cooked countless meals on it while at the dock and crossing the Pacific. It can handle a good sized tri-tip. We have even used woodchips to smoke pork roasts and other things.

Product features

Kuuma Camco 58140 Stow N' Go 125 Gas Grill

The Kuuma Stow N' Go 125 Gas Grill is a compact grill that offers quality construction and convenient portability. Its compact size is perfect for when space is at a premium. Stow N' Go grills can be easily transported and can also be mounted to any Kuuma rail, rod, or pedestal mount. The grill has a cooking surface of 125 square inches and a heat output of 9,000 BTU/hr. It is compatible with 1 lb. throwaway propane cylinders. Constructed of 304 stainless-steel. Weighs 14.5 lb.

Product description

Camco's Mushroom-Style Anchor easily secures boats in areas with muddy or weedy bottoms. It is ideal for light boats, such as canoes or rafts. The anchor weighs 10 lb. and features a PVC coating to help protect your boat from scratches. Rust and corrosion resistant.

• The Perfect Anchor: Easily secures boats in areas with muddy or weedy bottoms
• Compatibility: Ideal for light boats such as canoes or rafts
• Features: PVC coating helps protect your boat from scratches
• Anchor Weight: 10 lb.
• Long Life: Rust and corrosion resistant

User questions & answers

Question:	What is the diameter of the bell itself? Need to know how wide it is? Thank you
Answer:	Diameter is 6.25 inches.

Product description

Camco's heavy duty Marine Winch is designed to assist in the process of loading your boat onto the tow trailer. The winch helps smoothly, accurately, and safely load the boat. The heavy duty gears and corrosion resistant zinc plated steel is durable and long-lasting. 2,000 lb. capacity winch with 2" polyester webbing strap has excellent UV resistance.

• Manual winch assists in loading your boat onto the trailer
• Corrosion resistant zinc plated body
• 2,000 lb. weight capacity
• Heavy duty gears
• 20 foot strap included

User questions & answers

Question:	Does the wench lock, so you dont have to hold it
Answer:	Yes, it lock.
Question:	How long is the handle
Answer:	I can measure it if you like but it's the same size as the handles on the last two winches I've had on the trailer. Each was a different brand. The handle on this one is much nicer.
Question:	What is the length of the handle
Answer:	The length of the handle is 8" from the center of the winch gear to the center of the handle. This is the second season for my winch and it is still working fine.
Question:	How wide is the mounting base
Answer:	3 1/2 Wide 5 1/2 Long

Product description

For use on a mounted grill as a cover or a portable grill as a tote. Heavy-duty weather resistant polyester provides long lasting protection in every storage environment. Helps protect Kuma Grills from outdoor elements.

• Perimeter lighted white dial
• Stylish blue and black graphics
• Polished Stainless Steel bezel
• Domed glass lens

User questions & answers

Question:	What size is it
Answer:	I used it on a Kuuma Premium Stainless Steel Mountable Gas Grill (you can find it here on Amazon) and it fit perfectly.
Question:	Would it work? with kuuma camco 58140 stow n' go 125 gas grill
Answer:	Yes it works. Screw-attach a small Coleman camping gas cylinder for fuel. Grill works well on a pontoon boat.
Question:	Is there enough room in the bag to carry gas cylinders and grilling utensils
Answer:	I don’t think the bag has much extra room but you could possibly wrap the grilling utensils in a soft cloth and store them inside the grill while in the bag. Not sure if one or two gas cylinders would fit too.
Question:	Will this cover fit a Kuuma 58130 grill mounted on a boat
Answer:	Not sure of the size for the 58130 but I can put 2 small propane tanks in the bag on the side of my grill and I have the 160 hope this helps

Product description

The Camco Marine Mechanical Suction Cup Towel Hook features hooks and installs to the interior/exterior of your boat, glass and other smooth non-porous surfaces. This allows you to hang a variety of items, such as wet towels and swimsuits. It suctions tightly with a twist turn mechanical suction cup design, securing your items while they remain hanging. Constructed of durable plastic, the suction cup hook is UV-stabilized for a long life. It's ready to use—no tools are needed for installation.

• Multi-Functional: hooks hang a variety of items, such as towels and swimsuits to the interior/exterior of your boat, glass and other smooth non-porous surfaces
• Features: Super strong mechanical suction cup
• Durable Construction: Constructed of durable plastic
• UV-Stabilized: For long life
• Ready-to-Use: No tools needed for installation

Product features

Hang Wet Towels and Swimsuits

The Camco Suction Cup Hook allows you to hang your wet towels, swimsuits and other items, keeping them off the ground. Installation is easy—it installs tool-free to the interior/exterior of your boat, glass, and other smooth non-porous surfaces. The hook uses a twist turn mechanical suction cup to securely hold your items while they remain hanging. It is constructed of durable plastic and is UV-stabilized for a long life.

About Camco Manufacturing

Camco proudly manufactures many of our 4,000+ products in 5 facilities across the United States, including items from flagship brands like RhinoFLEX, TastePURE, TST, Currituck, and FasTen.