13 best travel trailers

Product description

Heavy duty blocks are safe and easy to use. They offer many options for leveling single wheels, dual wheels, hydraulic jacks, tongue jacks, stabilizer jacks, 5th wheel jacks and tandem axles. Customize your levels: Stack interlocking blocks to desired height. Strong and durable blocks are available in a ten block set and a four block build up set. Patented. Each set comes in a convenient storage bag.

• 10 interlocking blocks stack to the desired height for safe and easy leveling
• Strong and durable construction
• Solid bottom to help keep them from sinking in soft ground
• Includes zippered storage bag with handle
• Each leveling block measures 8.5 inch x 8.5 inch x 1 inch

User questions & answers

Question:	How sturdy are these? i have a class b rv that weighs about 9500 lbs dry (only 4 wheels). i used plastic block levelers from campingworld and they broke in their first use
Answer:	This is my second set of these blocks (because I needed more to level on steep incline) only one of the first ten has failed and that's because i did line it up with the jack. My class A Rv weighs 22000 dry they have served me well for 6 months
Question:	What's the difference between Camco 44512 and 44505 models
Answer:	44505 is our leveling blocks. 44512 is our Fasten Leveling Blocks with T-Handle. You can give us a call at 800-334-2004 if we can be of further assistance. Thanks.
Question:	What is the weight limit for these Camco blocks? For the Camco Trileveler it is only 4000 lbs
Answer:	I've used them used under the wheels of some rather large class A motorhomes. What destroys them is if they start to slide when you drive onto them. You have to orient them like a staircase so that you are not attempting to "climb" more than the thickness of "one block per step". Rough, rocky ground can also damage them. In many situations, you'll need more than just 10 blocks. If you really want to be prepared, get 20, or even 30 blocks (two or three 10-pks.) If you use them under the rear of a motorhome that has duals, you need separate "staircases" of blocks for inner/outer wheels, because the blocks are not wide enough to support both inner and outer wheels on the width of a single block.
Question:	What are the dimensions of each block
Answer:	8 1/2 x 8 1/2 x 1 Warning: The 10 answers you will find here all have one thing in common, none of them had a clue but decided to added a few inches here and there. If you can't scroll down the description to find the dimensions, maybe it's time to put your mouse pad away for the winter.

Product features

Interlocking Leveling Blocks

The Camco Leveling Block 10-pack allows you to stack the interlocking blocks to the desired height for safe and easy leveling. These blocks can be used with single wheels, double wheels, hydraulic jacks, tongue jacks, stabilizer jacks, 5th wheel jacks and tandem axles.

Camco’s RV Leveling Blocks make it easy to customize your levels. Simply stack the interlocking blocks together to your desired height. They have a strong, durable construction and a solid bottom to help keep them from sinking into the ground.

Engineered with a patented design to optimize both strength and weight, resin is UV stabilized and built to last even when exposed to sunlight for extended periods of time. Bright, visible yellow color helps you see them so you don’t leave them behind. They can also be used to help prevent your stabilizers from sinking in soft ground.

Camco's RV Leveling Blocks measure 8.5 inch x 8.5 inch and can be used with stack jacks, trailer tongues, 5th wheel jacks and swing arm supports. If dirt or debris build up in the leveling blocks, just knock it off and hose it out before storage. Product includes a zippered storage bag with handle to keep them all together when not being used.

Easy to drive on and off

Bright yellow blocks are highly visible

Solid bottom resists sinking

Zippered carrying bag fits all 10 blocks

About Camco Manufacturing

Camco proudly manufactures many of our 4,000+ products in 5 facilities across the United States, including items from flagship brands like RhinoFLEX, TastePURE, TST, Currituck, and FasTen.

• For water pressure regulation/reducing on RV
• Lead free brass pressure reducer, lead free brass pressure gauge, conforms to California AB 1953 standard and 2014 US Safe Drinking Water Act
• 2" dial size pressure gauge, 0-160psi,Glycerin filled for vibration and pulsation proof
• 3/4" hose female inlet and 3/4" hose male outlet, compatible with all US water sources
• Screw driver for pressure adjustment, teflon tape are included, whole kit packed in a protective, portable canvas bag

User questions & answers

Question:	gauge oil 1/2 empty is it normal
Answer:	Mine was about 1/2 empty as well so I assume this is normal.
Question:	Is this designed to control gallons/minute? I am looking for something that will reduce the flow from my garden hose to around 1 gallon/minute
Answer:	No only a pressure regulator. You would need an adjustable flow regulator to control volume.
Question:	What is the recommended max water pressure for a Rv
Answer:	Check your owners manual for your model / make. I keep mine set at 55.
Question:	What is the warranty period on this regulator
Answer:	1 year

Product features

MEASUREMAN RV Water Pressure Regulator

For water pressure regulation/reducing on RV Forged lead free brass pressure regulator body, Pressure adjusatableon the top,Connection compatible with all US water sources.

Lead-Free

Lead free brass material conforms to California AB 1953 standard and 2014 US Safe Drinking Water Act.

Pressure Adjusatable

Pressure adjusatable on the top,Screw driver for pressure adjustment, teflon tape are included.

Lead-Free Liquid Filled Pressure Gauge

It's nice to see the actual water pressure of your RV, 0-160psi single scale, big easy to read.

• On/off switch provides complete control over battery life
• Entirely redesigned smartphone app with great new features
• Drastically reduces setup time--works with RVs, travel trailers, and 5th wheels.
• Enables dynamic site evaluation before you park; accurate to 0.1 degrees.
• Smartphone/tablet are not included with product.

User questions & answers

Question:	Can this be installed in the front storage compartment of a 5th wheel or should it be install inside the 5 th wheel
Answer:	We mounted ours inside the cupboard over the table because that was the most center of our 5th wheel. You could probably put it up in the storage compartment as long as the 5th wheel is level when you do that and that it's the center of your trailer.
Question:	Will this also work for a driveablke mnotorhome
Answer:	I don't see why not. It is a leveling device.I think it will work perfectly.
Question:	Are you selling/shipping the 2nd generation with on/off switch? it says that you are shipping but want to be sure i am purchasing the gen
Answer:	I have 1st gen and argued with their support for while about it not having an on/off switch. They made the statement that the average RV only travels once or twice a year. I explained that the folks willing to fork out this kind of money for this single function might be traveling weekly or daily. PUT A SWITCH ON IT!!!! Now, they have agreed with me and others, I suppose. For those with Gen1, I would suggest what I'm going to do...1) Get a 15 cent micro switch and install it on the cover. 2) Get a 3v cell battery (not a button....the larger types you might find in a garage remote or something. With some small wires, tape, whatever you need, wire in the switch and bigger battery. Should run as well if not better than the gen 2 if you have a much higher capacity battery.
Question:	The book says to calibrate with the slideouts deployed. Yet elsewhere it suggests keeping the slideouts in. Are the slideouts supposed to be retract
Answer:	The slide outs should be extended when initially leveling the RV during setup. Before completing the Set Level step, the slide outs should be retracted. This causes the LevelMatePRO to record the slightly off level position with the slides in as the level point. This is needed because you do the leveling with the slides in. Once you use the LevelMatePRO to level with the slides in, when you put the slides out you should be back at the point you were at when you did the initial leveling during the setup process

Product features

Towable Leveling Simplified

LevelMatePRO simplifies a procedure that has traditionally required a lot of time and guesswork. Eliminating the trial and error approach, you can simply level your trailer using the height indicated, and when hit green zeros, you’re done.

Driveable Leveling Perfected

The LevelMatePRO can display leveling information from a top view which displays the height required for each wheel to reach a perfectly level position. Simply stack your leveling blocks for each wheel at the height indicated, drive up once and level your vehicle on the first try.

Reconnect With Ease

A LevelMatePRO feature loved by users with towable vehicles, the ability to save and recall the hitch position saves time and simplifies the reconnection proccess. Eliminating multiple trips in an out of your tow vehicle at a time when you are ready to get down the road…priceless.

Upgradability

The LevelMatePRO is a dynamic product. Since it uses an iOS or Android smartphone or tablet app that you download from the app store, we will continually add more functionality and enhance the product at any time by simply updating the app.

• 【High Speed】Unique central axis linkage design to make the central shaft can drive screw at both ends to operate at the same time. A foldable and anti-lost new integrated wrench is more timesaving and convenient to use, you can change the turning direction only by pushing the valve, so the overall speed is 10 times faster than others.
• 【New Design】With silicone sleeve handle, it is comfortable to use. And provides added stabilization and prevents tire shift by applying an opposing force to two tires, safe and reliable.
• 【Safe Code Lock】High-strength stainless steel combination lock for your wheel stabilizer to prevent theft, and the instruction manual is also included.
• 【Good Quality】No need to worry about deformation because we widen all the connecting pieces of the X frame and secure all of the connecting pieces. In addition, our wheel stabilizer also has an anti-rust coating.
• 【Universal Use】It is universal for all trucks, campers, travel trailers and fits even the tightest of spaces reducing down to 2" and extending up to 10".

Product features

Step 1

Make your numbers aligned and pull up the beam to unlock

Step 2

Find the right angle to put the code lock into the stabilizer，and keep the code side outside for easily opening

Step 3

Rotate the wrench to a suitable angle and put it into the code lock for locking

Product description

Camco's Eaz-Lift Elite Weight Distributing Hitch Kit is designed to provide trailers with a smoother ride than that found in other hitches via its interchangeable bars that have positive latching action for operation. It includes a round bar weight distributing hitch, sway control and hitch ball. The 2-5/16" hitch ball and sway control ball are pre-installed and torqued to specification on the hitch head. The U-bolts and chain package are pre-installed on the spring bars. It has a maximum tongue weight of 1,000 lb. and a maximum gross weight rating of 10,000 lb. Mounting hardware is included.

• Your purchase includes 1,000-pound weight distributing hitch, sway control, 2-5/16" hitch ball & mounting hardware
• Product dimensions – 31” L x 11.5” W x 7.44” H | Hitch ball – 2-5/16” | Tongue weight limit – 1,000 lbs. | Gross weight rating – 10,000 lbs.
• U-bolts and chain package are pre-installed on spring bars
• Eaz-lift Elite Weight Distributing Hitch Kit allows you to save time with pre-installed components
• Hitch ball and sway control ball are pre-installed and torqued to specification on adjustable ball mount

User questions & answers

Question:	How do I adjust the sway bar? Tight or with a little play in it? The instructions say NOTHING about the sway bar adjustments!! Help
Answer:	Get on level ground without any big turns...the sway bar should only be put on once you're heading out for the trip...I put mine on tight...used a wrench to tighten it to pretty tight...not super tight...bring the wrench incase you notice that it needs to be adjusted on the trip...so far with 2 trips...one was a close weekend trip and another was 2,500 miles...all I needed was the bar, my wrench and a rubber ended mallet...the tighter I made the sway bar...the better my trip was...that was just my experience...and I removed it when I had to make hard turns...
Question:	my 30 ft Jay Flight TT tonge wt is 800 but i plan on adding batteries to bring it close to 1000Ibs can I still buy 48058? Can I use my 2 5/16" ball
Answer:	I don't think it would be a good idea to run this unit at close to its maximum capacity. Trailers have a tendency to get loaded up over time, and I would not want to have a road incident where the insurance company could say I was running my rig unsafely. The 48069 1200 lb unit is only $5 more, I'd go with it. I'm guessing I'm at 600-700 lbs tongue weight on my trailer - it makes a huge improvement in handling. It comes with the 2 5/16" ball. You might consider an electric tongue jack, you'll find it really helps out to set the chains -- you have to jack the rig way up to do so, and most hand crank jacks don't have the range you need without a multi-step blocking and raising corner jacks routine.
Question:	Is the shaft on this set up solid steel
Answer:	Shaft????? Or shank, If you talking about the shank yes it is very solid,However didn't work my truck because it has a 10inch lift, so the shank was too short , so I had to buy another shank, which was a longer one that cost me about $200. If u have a non lifted truck or a small lift on it you'll be fine .
Question:	Is hitch ball height adjustable on shank? The picture blocks that view
Answer:	Not only is the height adjustable, but you can tilt the hitch to allow the proper amount of flex in the torsion bars. Try the adjustment with the hitch connected, the trailer loaded with about 10% of the gross trailer load as a hitch weight. Then adjust the hitch height and tension bars so the tow vehicle drops about one inch with everything connected and properly loaded.

Product description

The X-Chock starts off where the Deluxe Tire Locking Chock left off, but it's new, slimmer design will fit into more axle applications. Fits between tandem tires, it locks wheels by applying force to both tires. Aids in trailer stabilizing and prevents tire shifts. A hand operated plated ratchet wrench (Model 841025, included) turns a drive nut, extending the chocks against the tires for locking and retracting the chucks for removal.

• Provides added stabilization and prevents tire shifts by applying opposing force to tandem tire applications
• As opposed to other chocks, the X-Chock works with the tires’ natural movement instead of against them
• Fits even the tightest of applications retracting down to 1 3/8” and extends to 10”
• Rust inhibitive coating.
• Plated ratchet wrench with comfort bumper included
• Item weighs 11.2 lbs

User questions & answers

Question:	I only have 3" between my tires would these fit
Answer:	I have not used the item yet but per manufacturer “Fits even the tightest of applications retracting down to 1 3/8” and extends to 10”.
Question:	Is the x-chock wheel stabilizer lockable? that is, with a lock of some type
Answer:	Ours say Lockable with the optional 28015 Pad Lock - Which I have not located yet.
Question:	what is widest separation they will handle-My tandems are 8 1/2" apart
Answer:	That full opened, it is 10 inch they will open. 8 1/2 inch would be at the max for them to have good holding power.
Question:	Does this product come in a pack of 2 or as a single item
Answer:	These come in Pack of two.

Product description

Camco RV 10' Sidewinder Sewer Hose Support is sturdy and lightweight. Plastic support with strong snap-fit hinges has deep cradles to hold sewer hose in place without straps. No staples to rust. Easily positions around obstacles and stays where you put it. Won’t creep closed. Convenient handle makes storage even easier. The bottom of the Sidewinder cradle is 7-1/4" high at its highest point and 4" high at its lowest point. Patented.

• The Ultimate Protection and Support for Your Sewer Hose: The 10 foot Sidewinder RV Sewer Hose Support by Camco lifts and cradles your sewer hose while in connection from your RV to the dump station; It keeps your sewer hose off the ground and prevents potential damage or punctures to your RV or camper sewer hose by safely nesting it in heavy duty plastic
• Hassle Free Preparation and Setup: Conveniently ready to use straight of the box with no assembly required; Comes complete with winding sidewinder RV sewer hose support, and orange custom fit storage handle that clasps on to your compressed Sidewinder for simple toting and handling
• Lightweight Yet Durable and Sturdy Frame: This all plastic design, creates a lightweight and weatherproof product made to last long; It is constructed with a rust and corrosion resistant plastic material that is durable enough to carry your hose over the roughest terrains
• Designed for Simplicity and Reliability: Designed with deep cradles and grooves that will secure your sewer hose in place without having to use frustrating straps; Once sewer hose support is extended to desired length, will remain in place without creeping closed; Flexible design allows this support to curve around and avoid obstacles with ease; Easy to clean just hose it off and let air dry; Compatible with all standard 3 inch diameter sewer hoses
• Increased Sewer Hose Drainage: Angled to help in drain sewer hose contents, it is 7.25 inch at its highest point and 4 inch at its lowest; Each cradle, slightly decreases in height, creating a gentle downward slope as your hose gets closer to the septic connection ensuring better drainage in comparison to a non angled surface

User questions & answers

Question:	How to remove coupon
Answer:	I would think it would work, unless you are running up hill.
Question:	If you have a 15' hose do you need the 10' support or the 15' support? It seems like you wouldn't really need as long of a support as your hose is
Answer:	The 10' will work
Question:	Will a 10' hose stay on the 20' supoort? any issues with doing this
Answer:	Sure. It opens up to the full 20 ft. If you need it but you can extend it less to hold a 10 footer.
Question:	Are the heights of each one adjustable
Answer:	Each section is slightly lower than the section before it, creating a gentle slope. Each individual section is not independently adjustable however.

Product features

Sturdy and lightweight support

Camco 20 feet Sidewinder Plastic RV Sewer Hose Support keeps everything flowing smoothly to the dump station. The Sidewinder is sturdy and lightweight. The plastic support system has strong interlocked hinges and deep cradles to hold the sewer hose in place without straps. The Sidewinder easily stretches out without creeping closed and positions around obstacles to stay where you put it. The convenient handle makes storage and transportation even easier. The bottom of the Sidewinder cradle is 7-1/4 inches high at its highest point and 4 inches high at its lowest point. It extends to fit a 20-foot hose and compresses to just 12-1/2 inches.

How it works

Remove the orange handle from the Sidewinder and extend Sidewinder to the desired length. Position between your RV and the sewer inlet with the highest end at the RV and the lowest end at the sewer inlet. Lay the sewer hose into the cradle of the Sidewinder and then hook up the sewer hose as you normally would. When complete, Collapse the Sidewinder and use the handle to secure it closed.

Sturdy, lightweight frame

The sidewinder sewer hose comes with a reliable carrying handle for simple toting and storage after each use. Collapses to 12.5 inches for easy storage.

Gentle slope down to dump station

Angled to help in drain sewer hose contents, it is 7.25” at its highest point and 4” at its lowest. Each cradle, slightly decreases in height, creating a gentle downward slope as your hose gets closer to the septic connection ensuring better drainage in comparison to a non-angled surface.

Included carrying handle

Deep cradle to hold sewer hose

About Camco Manufacturing

Camco started in 1966 with one employee and one product. Today, over 40 years later, we have more than 350 employees, over 3,000 products and multiple manufacturing facilities in the USA and across the globe.

Competitive pricing, superior service, quality products and customer satisfaction are the foundations upon which Camco operates. Our friendly, knowledgeable customer service staff stands ready to assist our customers with any questions. At Camco, we take pride in meeting the ever changing demands of a challenging marketplace while serving you, our most valuable asset.

Product description

Lynx Recreational Vehicle Leveling Kit. Modular designed levelers not only configure to fit any leveling function, but they also withstand tremendous weight. To use: simply set them into a pyramid shape to the desired height that the RV needs to be raised and drive onto the stack. The levelers can also be used as a support base for other stabilizing equipment. Use under single and dual wheels, under tandem axles and under jacks. 8-1/2 inch x 8-1/2 inch with 1-1/2 inch thickness to give 1 inch lift. The 10 pack comes in an easy to store nylon bag and weighs less than ten pounds.

• Lynx Recreational Vehicle Leveling Kit, 10/Pack
• Modular designed levelers not only configure to fit any leveling function, but they also withstand tremendous weight
• To use: simply set them into a pyramid shape to the desired height that the RV needs to be raised and drive onto the stack
• The levelers can also be used as a support base for other stabilizing equipment

User questions & answers

Question:	I have a 30,000 lb. motorhome and wonder what is the best product for putting under leveling jacks
Answer:	My Class A motorhome has a GVW of 26,000 pounds and I've used the Lynx leveling blocks and caps under my rear hydraulic leveling jacks, where most of the weight is, without a problem.
Question:	Is this made in USA
Answer:	Yes, they are made in the USA
Question:	This 10 pack results in 3 inches of lift, correct? (Can't find that detail on this Amazon page
Answer:	By the way, the full 4-3-2-1 arrangement will give you about 4.5" of lift. You would need all 20 from 2 sets, and not have enough land to build in the center. To get 4 levels under each wheel, you would have to place all 20 from 2 sets, pulling forward and backward a few times, while you build each stack. We've never needed more than 3 levels.
Question:	How are these for use on dirt/gravel/grass un-level ground (campsite)? I would be using these in campgrounds to drive my 81 VW Vanagon up on
Answer:	These are specifically made for unlevel conditions. The only concern is you have to watch the gravel. You don't want big chunky rocks under these. I had to buy two kits as one wasn't enough. I use them on a 12k Lb tandem axle 38 ft 5th wheel. Takes 3 under each wheel for me just for starters then one under the landing gear and rear stabilizers. That's 16 and gives me 4 more to add to the low side. If the campsite it any more out of level then that I don't want to park there anyhow.

Product features

Lynx Leveler - RV Leveling Blocks

Lynx Levelers provide a safe and easy way to level most vehicles.

10 Year Warranty

The best just got better. Now you can easily register your Lynx Levelers on our website and stay level for longer than ever.

The Original RV Leveling System

Tri-Lynx has been providing RV leveling systems and RV accessories since 1993.

Products Designed With the User in Mind

Lynx Levelers interlock, easily store and come with a tough nylon storage bag.

Made in the USA

All Lynx Levelers are manufactured in America. Look for the Orange... Look for Lynx.

Product description

Fits even the tightest of wheel retracting down to 3”and extends to 12"; Use for camping trailer, camper, RV

Provides added stabilization and prevents tire shift by applying an opposing force to the two tires;

Each box contain two wheel chock scissor stabilizer, weight 10lb, made by high- quality steel;

The enhanced rust-preventative treatment allows those chocks to withstand a wide variety of weather from coast to coast;

• Use for camping trailer, camper, RV
• Fits even the tightest of wheel retracting down to 3”and extends to 12";
• Provides added stabilization and prevents tire shift by applying an opposing force to the two tires;
• Each box contain two wheel chock scissor stabilizer, weight 10lb, made by high-quality steel;

User questions & answers

Question:	Does it work with wide Trax suspension
Answer:	12" max spread
Question:	Are they made in USA
Answer:	Designed by Texas Solar USA..made in China
Question:	Does this package come with 2 chocks or does it come with 4? The wording in confusing
Answer:	The package comes with 2.
Question:	How can I fix it to fit
Answer:	You need the right size, then use a ratchet to widen it to fit

Product description

The Jack-It's innovative frame design installs over the tongue jack on the trailers A-Frame, the softest riding area on the frame. The BikeWing carrier holds two bikes safely, securely and simply by the wheels. The adjustable wheel cradles and SwayStop straps secure the bike wheels to the bike carrier for a secure ride. The Jack-It allows travel trailer owners to utilize the valuable rear hitch/cargo space for additional gear and gives owners a new cargo utilization space

• Fits all bike frames
• Fits most A-Frame travel and cargo trailers
• PowerTower frame protects tongue jack from impact
• Frees up travel trailers rear hitch/cargo area
• Includes Sway Control cradles, Lockable No Motion pins and 3/8"-16 1-1/2" bolts

User questions & answers

Question:	Can you use this with a manual jack, with a handle you turn to raise and lower
Answer:	Good Morning Kerry B Didday, Thank you for your product question. LCI's Jack It will work with a manual crank with a side crank application or a Electric Tongue Jack.
Question:	We have a fat tire bike and an adult trike. Will these fit using this product
Answer:	Hello and thank you for contacting LCI. The Jack-it has adjustable wheel cradles and SwayStop straps that fits most bikes. If you have additional questions please reach us at 574-537-8900. Thank you.
Question:	Does this fit a 221/2 inch power jack
Answer:	It should it fits the bolt pattern on the tongue of your trailer where the jack is bolted. Those three bolts that hold the jack on are a standard pattern.
Question:	My travel trailer has 30lb propane tanks on a lippert frame with a lippert tongue jack. Will it clear the 30lb tanks
Answer:	It will clear the propane bottles, but you may not be able to put on the propane tank cover. I have the 2 big propane bottles(30lbs I think) . The only way you could put the cover on is put the cover on before you install the Jack-it. Only problem is. If you need to take the bottles off, you would have to take the jack-it of first. A pain in the butt. I just put mine on today 5/13/18

Product features

Carry Your Bikes With Peace of Mind

Have you ever wished you could see your bikes from your rear-view mirror as you tow your travel or cargo trailer down the road? Now you can with the patented Jack-It double bike carrier from Let’s Go Aero. The Jack-It’s innovative frame design installs over the tongue jack on the trailers A-Frame, the softest riding area on the frame. The BikeWing carrier holds two bikes safely, securely and simply by the wheels. The adjustable wheel cradles and SwayStop straps secure the bike wheels to the bike carrier for a secure ride. The Jack-It allows travel trailer owners to utilize the valuable rear hitch/cargo space for additional gear and gives owners a new cargo utilization space.

Quick Facts

• Fits all bike frames

• Frees up travel trailer’s rear hitch/cargo area

• 25-pound total weight (Jack-IT)

• 80-pound total capacity

• Fits most A-Frame travel and cargo trailers

• Carries your bikes by the wheels for balance, stability and ease of use

• PowerTower frame protects tongue jack from impact

• Bicycles and Power Tongue Jack not included

• Patented

Foam Bumpers Protect Your Bikes

Foam bumpers and the new SwayControl system enhance the rack’s natural stability and protects the bicycle finish.

PowerTower Protects Your Tongue Jack

The PowerTower design protects your tongue jack from impact from foreign objects.

The BikeWing Holds Two Bikes

BikeWing holds up two bikes by the wheels, adding natural balance, stability and sway control.

Fits Over Your Tongue Jack

Jack-IT fits most standard 3-bolt patterns over your tongue jack on the trailers A-Frame

Product description

For Campers, Motorhomes, Travel Trailers, 8" center set

• ABS plastic 8-inch main body, plating chrome
• Stainless steel made arch. dual-function spout
• Flexible arch can cover the whole sink
• Lever handles with quarter-turn stops, user friendly
• Easy intallment, 1/2 threaded male inlet shanks

User questions & answers

Question:	Can the faucet body/shaft be unscrewed for storage in a pop-up
Answer:	I don't know for sure, but I don't think so. looking at the one on my sink in the camper it would be difficult and may require taking out the whole unit each time.
Question:	hook up or
Answer:	8”
Question:	What is the size of the connections
Answer:	Standard for travel trailers
Question:	hook up or
Answer:	8"

Product description

Scissors Type locking chock prevents trailer rolling. Extends from 3-1/2" to 12 1/2" Anti-Rust coating processed.

Great tire chock system

camping trailer, camper, RV Fits even the tightest of wheel retracting down to 3”and extends to 12"; Provides added stabilization and prevents tire shift by applying an opposing force to the two tires;

Each box contain two wheel chock scissor stabilizer, weight 10 lb, made by high-quality steel;

• x chocks wheel stabilizer for travel trailers, Class A Moto home, Fifth wheel trailer, Travel Trailer, Toy Hauler etc
• Metal corrosion inhibitor treated, with maximum corrosion resistant barrier coating for outdoor use
• Camper wheel chock, wheel chock stabilizer, x stabilizer chock
• The manufacturer has more than 26 years of experience in auto parts manufacturing
• Two Packs in one box, rv tire chalks, rv chocks blocks for camping life

User questions & answers

Question:	Is there a way to put lock on these to help prevent theft
Answer:	These are not designed to be locked to avoid theft.
Question:	are there 4 chocks or 2? the wording is " 2 sets, for RV safety", "Two Packs in one box". a set typically is 2 so 2 sets would be 4chocks
Answer:	These are 1 set of 2 chocks.
Question:	Do these come in a size for wide spaced wheels
Answer:	Max spread is about 12 inches