10 best stabilizing jacks for travel trailer

Product description

Eaz-Lift's Olympian 24" Scissor Jacks fit pop-ups, trailers and other large vehicles. They allow for either bolt-on or weld-on installation. The scissor jacks have a certified 7500 lb. load capacity and are constructed of heavy-duty steel and powder-coated for maximum rust protection. Comes as a set of two. Measures 4-3/8-inches high when fully collapsed and 23-3/4-inches when fully extended.

• Effortlessly Stabilizes RVs: Scissor jacks have a certified 7500 lb. load capacity
• Easy to Install: Allows either bolt-on or weld-on installation
• Adjustable Height: Can be adjusted from 4-3/8-inches high to 23-3/4-inches
• Includes: scissor jacks and scissor jack socket for power drill
• Supports a Variety of Vehicles: Designed to support pop-ups, trailers and other large vehicles. Durable Construction: Made of heavy-duty steel and powder-coated to resist corrosion and rust

User questions & answers

Question:	Can anyone tell me about the life of this lift? I want to make a standup desk and i will be constantly cranking it
Answer:	only had 2 months but have used them to on a travel trailer about 20 times and it ways 2500ilbs and i use a cordless drill to do it
Question:	how much weight can they hold
Answer:	I'm using both of mine under 3k pounds of load, they are rated for 7500 pounds a piece
Question:	Does the socket or a handle come with the jacks
Answer:	Purchased in July 2018. Did NOT come with a handle or socket.
Question:	will a 3/4 inch socket fit the crank nut
Answer:	yes it will fit 3/4 inch.

Product description

Heavy duty blocks are safe and easy to use. They offer many options for leveling single wheels, dual wheels, hydraulic jacks, tongue jacks, stabilizer jacks, 5th wheel jacks and tandem axles. Customize your levels: Stack interlocking blocks to desired height. Strong and durable blocks are available in a ten block set and a four block build up set. Patented. Each set comes in a convenient storage bag.

• 10 interlocking blocks stack to the desired height for safe and easy leveling
• Strong and durable construction
• Solid bottom to help keep them from sinking in soft ground
• Includes zippered storage bag with handle
• Each leveling block measures 8.5 inch x 8.5 inch x 1 inch

User questions & answers

Question:	How sturdy are these? i have a class b rv that weighs about 9500 lbs dry (only 4 wheels). i used plastic block levelers from campingworld and they broke in their first use
Answer:	This is my second set of these blocks (because I needed more to level on steep incline) only one of the first ten has failed and that's because i did line it up with the jack. My class A Rv weighs 22000 dry they have served me well for 6 months
Question:	What's the difference between Camco 44512 and 44505 models
Answer:	44505 is our leveling blocks. 44512 is our Fasten Leveling Blocks with T-Handle. You can give us a call at 800-334-2004 if we can be of further assistance. Thanks.
Question:	What is the weight limit for these Camco blocks? For the Camco Trileveler it is only 4000 lbs
Answer:	I've used them used under the wheels of some rather large class A motorhomes. What destroys them is if they start to slide when you drive onto them. You have to orient them like a staircase so that you are not attempting to "climb" more than the thickness of "one block per step". Rough, rocky ground can also damage them. In many situations, you'll need more than just 10 blocks. If you really want to be prepared, get 20, or even 30 blocks (two or three 10-pks.) If you use them under the rear of a motorhome that has duals, you need separate "staircases" of blocks for inner/outer wheels, because the blocks are not wide enough to support both inner and outer wheels on the width of a single block.
Question:	What are the dimensions of each block
Answer:	8 1/2 x 8 1/2 x 1 Warning: The 10 answers you will find here all have one thing in common, none of them had a clue but decided to added a few inches here and there. If you can't scroll down the description to find the dimensions, maybe it's time to put your mouse pad away for the winter.

Product features

Interlocking Leveling Blocks

The Camco Leveling Block 10-pack allows you to stack the interlocking blocks to the desired height for safe and easy leveling. These blocks can be used with single wheels, double wheels, hydraulic jacks, tongue jacks, stabilizer jacks, 5th wheel jacks and tandem axles.

Camco’s RV Leveling Blocks make it easy to customize your levels. Simply stack the interlocking blocks together to your desired height. They have a strong, durable construction and a solid bottom to help keep them from sinking into the ground.

Engineered with a patented design to optimize both strength and weight, resin is UV stabilized and built to last even when exposed to sunlight for extended periods of time. Bright, visible yellow color helps you see them so you don’t leave them behind. They can also be used to help prevent your stabilizers from sinking in soft ground.

Camco's RV Leveling Blocks measure 8.5 inch x 8.5 inch and can be used with stack jacks, trailer tongues, 5th wheel jacks and swing arm supports. If dirt or debris build up in the leveling blocks, just knock it off and hose it out before storage. Product includes a zippered storage bag with handle to keep them all together when not being used.

Easy to drive on and off

Bright yellow blocks are highly visible

Solid bottom resists sinking

Zippered carrying bag fits all 10 blocks

About Camco Manufacturing

Camco proudly manufactures many of our 4,000+ products in 5 facilities across the United States, including items from flagship brands like RhinoFLEX, TastePURE, TST, Currituck, and FasTen.

Product description

Warning: these jacks are from Libra Trailer Parts only, our jacks has passed strict industrial standard testing, all other sellers under this listing actually selling different jacks, beware of cheap jacks that made by thinner steel, which never pass the testing.

• True HEAVEY DUTY 7500 lbs# capacity, made by 11ga steel. comparing others made by 14ga steel but market as "up to 7500lbs"
• Includes 4 steel jacks and 1 crank handle, also include a 3/4" hex magnetic socket to raise/lower jack faster by power drill!
• Aslo include 16 pcs 3/8" mounting screws & matching 9/16" socket, a 11/36" mounting hole drill bit, one set of drilling guide sticker, everything you need for install!
• Capacity: 7,500 lbs per jack. Extended height: 24", Retracted height: 5", Retracted length:26", width: 7.5"
• For RV stablizing and leveling purpose only, NEVER use for lifting, changing tires or supporting weight of any vehicles,

User questions & answers

Question:	will it fit all models of camper
Answer:	Thank you for your inquiry about HOTSYSTEM. It is 24" when fully extended.
Question:	can a winnebago view be equipped with a power levelling system
Answer:	Internal fuse is good enough. Wires directly to the battery. Have had no problems with this jack. Works excellent.
Question:	Do you sell a 30 inch 7500 lb set
Answer:	No but you can pull the power wire when you are through using it to make it inoperable.
Question:	Are these rated at 7500 pounds per jack or 7500 pounds combined between the 4 jacks as one unit
Answer:	Hi, thank you for your inquiry about HOTSYSTEM. This uses the standard 4/3-5 left hand nuts. Hope this can help you.

Product description

Warning: These stabilizer jacks are for RV stabilizing and leveling purpose only. NEVER use for lifting, changing tires or supporting weight of any vehicles. Improper use can result in property damage, serious injury or death and will void the warranty!

• Stablizing and leveling your RV/Trailer, Remains steady on soft surfaces because of wide bow-tie base
• Includes 4 steel jacks and 1 crank handle, Also include a 3/4" hex magnetic socket to raise/lower jack faster by power drill!
• Aslo include 16 pcs 3/8" mounting screws & matching 9/16" socket, a 11/36" mounting hole drill bit, one set of drilling guide sticker, everything you need for install!
• Extended height: 24", Retracted height: 4", retracted length: 26-1/2", width: 7.5"
• Capacity: 5,000 lbs per jack, bulit by same material as other brand's "up to 7500lbs"

User questions & answers

Question:	the 40lb item weight, is that for all
Answer:	Yes, I purchased them and they actually weighted about 11lbs each jack...
Question:	How far apart are two top bolts/scissor-arm-axles, center to center? Want to use existing welded plates on frame
Answer:	Hello, If you talking about the bolts in the mounting plate. They are 2 inches apart. Front to back. That is center of bolts. Hope that helps.
Question:	Do these have to be mounted in order to use as stabilizer
Answer:	Yes, have to be mounted either by bolts or by welding, it’s for the safety
Question:	What is the retracted length, is it 12" or 26 ½? Please reply soon
Answer:	I can only verify information on items sold by classacustoms Extend Height: 24" Collapsed Height: roughly 4" Collapsed Length: roughly 27" (this includes screw) If the distance between the ground and your trailer frame is less than 20 inches you should use 24 inch jacks (not 30 inch jacks) Do Not use the scissors jack to lift excessive weight or tires off the ground. Jack is made to stabilize your unit, not lift unit off the ground. Vehicle frame and door jam damage may result. Do Not use these scissors jack as a tire changing jack.

Product description

Tired of waking up in your RV every time someone moves? Keep it steady with the Quick Products RV Stabilizing and Leveling Scissor Jack! This scissor jack is raised underneath your parked RV, giving it that extra bit of support needed to keep the rocking to a minimum. With up to 24” of extended reach, these jacks are sure to keep you and your RV steady. Note: The Quick Product RV Stabilizing and Leveling Scissor Jack is not for lifting purposes and is not intended to double as a tire jack or lifting the vehicle under any circumstance.

• Scissor jack raises underneath your RV to level and stabilize
• 5,000 lb. capacity
• Maximum height of 24”; Retracted height 4”
• Do not use for lifting purposes
• One-year replacement warranty

User questions & answers

Question:	If you can't lift with it, how can you claim it will level? And why call out capacity if it can't lift? Stablizing and leveling are not the same thing
Answer:	I hit a curb and bent an original jack so I had a plate already welded to the frame. Original holes matched and with new bolts we were in business. If this is a new install you will have to drill and tap the frame or craft a plate with holes and weld it to the frame.
Question:	Do these come with the fasteners to attache to trailer frame
Answer:	No. Unless you have a 5,000 lb mower and want to bolt them on.
Question:	How do they attach to frame
Answer:	Good morning Jim, thank you for contacting Lippert Components. The maximum stroke is 30" and the height when fully retracted is 3.76".
Question:	Can this be used for lawn mower
Answer:	Stabilizer jacks do have weight rating but don't know what these are rated at.

Product features

Quick Products RV Stabilizing and Leveling Scissor Jack - Set of 2

We've all been in an unstabilized RV before. Every movement inside and out leads to the RV rocking and shifting on its own suspension, swaying in the slightest breezes and bouncing under every step. This makes it tricky to walk, impossible to sleep, and quite honestly, it's just not safe.

Stabilize and level you RV at any campsite with Quick Products RV Stabilizing and Leveling Scissor Jacks! The jacks permanently mount to your RV so they are never left behind and always ready when you need them. When you arrive at your campsite, extend the jacks to the ground to both stabilize and level your RV. They operate easily and efficiently with the included speed wrench, but may also be driven by a non-impact style power drill (not included).

Note: The Quick Product RV Stabilizing and Leveling Scissor Jacks are not designed for lifting purposes and are not intended to double as a tire jack or for lifting the vehicle under any circumstance.

Also Available from Quick Products:

Need more reach? Look no further. The Quick Products QP-RVJ-S30 Stabilizing and Leveling Scissor Jack provides the same outstanding features as our 24" leveling and stabilizing jack, but boasts up to 30" of extended reach! Available individually or as a pair.

Quick Products QP-RVJ-S30 Stabilizing and Leveling Scissor Jack

Quick Products QP-RVJ-S30-2PK Stabilizing and Leveling Scissor Jack - Pack of 2

Quick Products

When you ask for Quick Products, you’re not just asking for a brand. You’re asking for a no-nonsense industry powerhouse with more RV accessories than you could ever haul with you. From campsite power to lifting power, trailer hookups to sewer hookups, platform steps to step stabilizers, Quick Products provides the never-leave-you-stranded reliability you want and deserve.

Product description

If you have been camping in an RV without stabilizer jacks, you know that every movement inside the RV makes the motorhome rock back and forth. Get more support with the Dumble | RV Leveler Pads 4-Pack. Flip down support jacks on campers are made with thin material that is prone to bending sideways under load. Thankfully, this RV leveling jack 4-pack can handle up to 3 Tons per jack and are designed to keep a camper steady while its wheels are touching the ground (not intended to raise). The entire jack screw is removable, and the pad itself is a heavy washer that spins and is attached to a pin that threads in to the jack screw. For additional support on the fully extended rod, add an additional nut (not included) to bottom of threaded rod and tighten to adjusted height. WARNING: This product can expose you to chemicals which is [are] known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

• NO MORE SWAYING: Use the Dumble | Camper Stabilizer RV Leveling Blocks to stabilize, secure, and level your RV, camper, or travel trailer; Transfer weight on a constant vertical plane, support a car in storage to save from a tire going flat, use on trailer with single axle to keep the trailer from tipping back with too much weight in the wrong places, use under weak steps, or place in crawl space to stop floor creaks and rattles; For stabilizing only recreational vehicles – Do not use to raise
• FITS YOUR RV & TRAILER: Adjustable from 11.5 inches to 17.5 inches (29.2cm to 44.5cm); Make sure the height is correct for your use; Includes 6.2” x 6.2” x 8.75” inch (15.7cm x 15.7cm x 22.2cm) base and 6” x 8.8” inch (15.2cm x 22.3cm) threaded rod; Rod includes 1.75-inch (4.4cm) diameter slightly dished pad that makes a tight connection under your application
• BUILT TO LAST: Each jack supports up to 6,000 pounds (2,722kg) or 3 Tons (2.7MT); All components constructed from aluminum for maximum strength and longevity that resists corrosion; RV levelers nest into each other (stack) for storage
• EASY TO USE: The long bolt in the center of the jack stand is threaded; At the top of the jack stand is a large nut that fits into a pocket to keep it from turning; The center bolt raises and lowers by turning the long bolt with the T-handle, either clockwise or counter-clockwise; Place under a section of sub frame close to the corners; We recommend using wood or concrete blocks under jacks
• PACKAGE CONTENTS: Package includes RV leveling jacks to support a total of 24,000 pounds (10,886kg)

User questions & answers

Question:	I am looking to Jack up my trailer with normal Jack and sit these on all 4 corners to keep tire off ground, will these work
Answer:	Depends on how long your hair is ,but I would say yes shoulder length or a bit longer would blow back a bit. Like a ten -fifteen mph breeze I would say.
Question:	Will these work to lift a bed off a truck
Answer:	A tightening knob was broken on mine to. Perhaps a common shipping issue. Good fan though, no idea how to replace it, sorry.
Question:	Are these jacks able to lift a house to do repairs on a collapsed foundation
Answer:	Yeah this fan is a piece of garbage.. I had to get the motor replaced after like 5 uses. Getting the replacement was like pulling teeth.
Question:	Won't these slip off of the frame when walking in the trailer
Answer:	all you have do is remove the clam shell off.. use clorex wipes on the blades.. and inside the clam shell to remove the dust.. too difficult to use vaccum cleaner.. .. I do it about every 2 months to keep it going.. it works great for me so far. Ok? oh by the way, I keep this fan in living room... not in garage.. hope this issues helps u guys to clean out..

Product description

Aluminum stacker jacks are perfect for tent campers and small trailers. Handy 4 pack allows for added stability and support. For Stabilizing Only Not for Lifting. Handle included with each Jack.

• Textured Finish, No Sharp Edges
• Extends 11" to 17"
• For Stabilizing Travel Trailers, Campers, Cars, Boats, and RVs
• Base made of Aluminum Die Cast
• Maximum Capacity: 6, 000lbs per Stabilizing Jack

User questions & answers

Question:	Can these be used for 20 feet shipping containers
Answer:	Yes the motor is brushless
Question:	Are these exactly the same as the Camco 44560, also sold on Amazon
Answer:	Yes, the screen and trim is included. And, the fan is very quiet. I am very pleased with this fan.
Question:	Can these be used safely with a car
Answer:	The fan did come with screws although they might be more for putting in the interior trim ring. I would get stainless ones for the outside anyway. I plan on using a soft caulk for bedding the fan on the outside. Something like 3M 4200 or Rule elastomeric caulk.
Question:	Can these be used to help level the trailer
Answer:	If I run mine over night it uses about 65 Ah of the battery, on medium, on low it runs around 38 Ah and on high it runs at around 80 Ah. If you are using a Lead acid battery of 100 Ah I would not run it on any thing but low over night, or you can damage your battery. Install is easy, 2 wires like others stated just match the colors. (currently I am running with a 316 Ah Li-Po battery bank on mine and it can easily run it on high all night even with an inverter and TV going all night with plenty to spare. They also do an amazing job keeping things cool. I have thought about taking the AC unit off mine and putting another Fan-Tastic fan where the AC was, but I think the AC hole is too big, still researching that.

• MULTI-USE: Dock N Stow Gen 1 supports most any trailer tongue jack without damaging the trailer. It has a 5000 lb. capacity for any foot or post, round or square and a 2500 lb. wheel dock capacity. For RV's, Boating and Most Bumper Pulled Trailers.
• SPACE-SAVER: Gen 1 sits directly on 2, 2.5 or 3-inch trailer tongue or frame with the included dovetail spacers. Stored close to the area of use, you’ll never have to search for a stand again and you'll have more storage space to bring what you need. *Not to be used with C channel or I-beam frames.
• SAFETY: Gen 1 secures to square or rectangle tube frames with an included adjustable flat bungee & anti-slip silicone tape. Drive with it safely attached to your trailer. No more climbing up into the truck looking for your block of wood, risking injury.
• ADDED HEIGHT: Dock N Stow provides 6 inches of height saving you time trailering or de-trailering, no need to lower your jack to the ground. With the 1/4 inch lip around the top, they are stackable, add another Dock N Stow on top for 12 inches of height.
• DURABLE: Gen 1 is extremely durable, engineered and made for the outdoors using high quality ABS plastic which is resistant to UV exposure, water, heat, mud and most other environmental hazards. If Dock N Stow does get dirty, wipe it clean in seconds.

User questions & answers

Question:	It won’t fit underneath my circular foot by about a centimeter (retracted all the way). What can I do
Answer:	depends on the trailer, If your talking about a travel trailer that's 8000 lbs , no, utility trailer yes....their really made to stabilize
Question:	Can they hold 16k 5th wheel if i buy it for the two from legs
Answer:	Hell no!! These are stabilizer jacks
Question:	Where is this product made
Answer:	Absolutely not, these stabilizer jacks are just that. They can not support that kind of weight. These are made to just keep your trailer or rv from tilting or rocking while parked.... made of aluminum ....
Question:	Can you put the tongue of a trailer on these blocks instead of the wheel
Answer:	I have used them two times and no problem of them slipping off. They did help some in stabilizing the trailer, but not as much as I had hoped.

Product features

An innovative line of products to stabilize any trailer

The Ultimate Trailer Stabilizer

Dock N Stow is the most efficient way to stabilize your trailer tongue jack. Not only can it support almost any jack stand, but you can also securely fasten Dock N Stow on almost any trailer frame.

Safely stored only an arm’s reach away, Dock N Stow mounts directly on your trailer frame. With our patent-pending design for both Gen 1 and Gen 2 versions are fully adjustable to fit most frames.

Protection

Don’t risk damaging your trailer jack—let Dock N Stow take the beating! Prevent your jack, truck bed and other storage spots from being damaged by make-shift stabilizers or DIY jack stands.

Stability

Dock N Stow increases the footprint of almost any trailer tongue jack post, round or square plate, with 5000 lb. capacity and wheel with 2500 lb. capacity. As a result, it will reduce the chances of your jack sinking into the soft ground.

Innovation

Dock N Stow provides two simple and versatile designs: non-magnetic and magnetic. Dock N Stow Gen 1 is secured with a bungee and anti-slip tape while Dock N Stow Gen 2 is engineered with a magnet handle. Gen 1 and Gen 2 bundles also include two tire chocks and a combo lock.

Stowable

Right where you need it, Dock N Stow installs in seconds onto any 2-inch, 2.5-inch or 3-inch trailer frame when you use the included dovetail spacers. This means you can free up precious storage space for other travel necessities.

Safety

Dock N Stow will keep you from having to climb up into your tow vehicle, camper, boat, or trailer in search of a stabilizing block. It also prevents you from handling makeshift wood boards, cinder blocks or rocks.

Durable

Dock N Stow is engineered for the outdoors and built to last. It’s resistant to UV exposure, water, heat, mud and most other environmental hazards. If it gets dirty, just wipe it clean in seconds!

Added Height

No need to lower your jack all the way to the ground—Dock N Stow provides about 6 inches of height which saves you time when de-trailering. Stack two Dock N Stow blocks for up to 12 inches of height.

• MULTI-USE: Dock N Stow Gen 2 supports most any trailer tongue jack without damaging the trailer. It has a 5000 lb. capacity for any foot or post, round or square and a 2500 lb. wheel dock capacity. For RV's, Boating and Most Bumper Pulled Trailers.
• SPACE-SAVER: Gen 2 sits directly on 2, 2.5 or 3-inch trailer tongue or frame with the included dovetail spacers. Stored close to the area of use, you’ll never have to search for a stand again and you'll have more storage space to bring what you need.
• SAFETY: Gen 2 secures to steel square, rectangle tube, I beam and channel trailer frames with a powerful on/off switchable magnet. Drive with it safely attached to your trailer. No more climbing up into the truck for your block of wood, risking injury.
• ADDED HEIGHT: Dock N Stow provides 6 inches of height saving you time trailering or de-trailering, no need to lower your jack to the ground. With the 1/4 inch lip around the top, they are stackable, add another Dock N Stow on top for 12 inches of height.
• DURABLE: Gen 2 has durability built into it, engineered and made for the outdoors using high quality ABS plastic, it's resistant to UV exposure, water, heat, mud and most other environmental hazards. If Dock N Stow gets dirty, wipe it clean in seconds.

User questions & answers

Question:	Do i need to use spacers with this product on 2" frame
Answer:	No I used them at 6 feet apart I would not recommend for a shipping container because of the weight
Question:	Hi! Our camper trailer is 7,500 lbs in total - will this block hold for our jack? Thanks
Answer:	Yes
Question:	I don't understand why the product shows 99.96 and
Answer:	These are NOT safety jacks.
Question:	Can i get extra spacers to accomodate 1.5 inch frame and could i cut a groove on bottom sode to accomodate sitting over the lip of my battery tray
Answer:	I used them as additional supports for a 32’ travel trailer- they helps and are strong. Wouldn’t trust them exclusively but with the 4 scissor jacks and the tongue jack they help alot

Product features

An innovative line of products to stabilize any trailer

The Ultimate Trailer Stabilizer

Dock N Stow is the most efficient way to stabilize your trailer tongue jack. Not only can it support almost any jack stand, but you can also securely fasten Dock N Stow on almost any trailer frame.

Safely stored only an arm’s reach away, Dock N Stow mounts directly on your trailer frame. With our patent-pending design for both Gen 1 and Gen 2 versions are fully adjustable to fit most frames.

Protection

Don’t risk damaging your trailer jack—let Dock N Stow take the beating! Prevent your jack, truck bed and other storage spots from being damaged by make-shift stabilizers or DIY jack stands.

Stability

Dock N Stow increases the footprint of almost any trailer tongue jack post, round or square plate, with 5000 lb. capacity and wheel with 2500 lb. capacity. As a result, it will reduce the chances of your jack sinking into the soft ground.

Innovation

Dock N Stow provides two simple and versatile designs: non-magnetic and magnetic. Dock N Stow Gen 1 is secured with a bungee and anti-slip tape while Dock N Stow Gen 2 is engineered with a magnet handle. Gen 1 and Gen 2 bundles also include two tire chocks and a combo lock.

Stowable

Right where you need it, Dock N Stow installs in seconds onto any 2-inch, 2.5-inch or 3-inch trailer frame when you use the included dovetail spacers. This means you can free up precious storage space for other travel necessities.

Safety

Dock N Stow will keep you from having to climb up into your tow vehicle, camper, boat, or trailer in search of a stabilizing block. It also prevents you from handling makeshift wood boards, cinder blocks or rocks.

Durable

Dock N Stow is engineered for the outdoors and built to last. It’s resistant to UV exposure, water, heat, mud and most other environmental hazards. If it gets dirty, just wipe it clean in seconds!

Added Height

No need to lower your jack all the way to the ground—Dock N Stow provides about 6 inches of height which saves you time when de-trailering. Stack two Dock N Stow blocks for up to 12 inches of height.

Product description

Like a rock-solid race car chassis, JT's Strong Arm Jack Stabilizers use triangles — the strongest shape in nature — to eliminate unwanted chassis movement. One end of each stabilizer tube attaches to each landing gear leg and the other to the RV frame, forming a rigid triangle. There is no welding required and no need to remove and reattach during setup. It's permanent! When parked, JT's Strong Arm Jack Stabilizers telescope into place with the jacks.The patented universal system is designed to attach to the three main types of jacks found on RVs: scissor, front landing gear and telescoping. JT's Strong Arm Jack Stabilizers come in bolt-on kits of four or six stabilizer tubes.

• Eliminates annoying chassis movement
• Provides a rock-solid camping experience
• Dealer installation or do-it-yourself
• One-time installation/permanently attached
• Works with most jack applications
• Bolt-on installation; no welding required
• If unit has hydraulic jacks, three #314592 jack adaptor lugs are required

User questions & answers

Question:	Will theee work if my scissor jacks are angled
Answer:	I don’t think they would work. I think it would put too much of a bind on the arms. The only way I can see how they would work is to leave the arm connector bolt on the scissor jack just a tad loose to allow it to swivel with the arm. But use a nylock self locking nut to keep the connecting bolt in place instead of the regular nut. Don’t want it falling apart !!!
Question:	I need a strut between the front electric jack legs to bolt the center bracket to. Does this kit include one
Answer:	My fifth wheel will need a "strut" welded between the front two landing gear. The frame doesn't connect between the I-beams (frame) in the front, so will have to have something welded.
Question:	Wath is the difference betwin models 191025,191023 and 191024 hapijack
Answer:	191023 Is for a 5th wheel with over 58" between front landing gear, 191024 is for a 5th wheel with under 58" between front landing gear, and 191025 is for a Travel Trailer
Question:	Will this work on electric scissor jacks
Answer:	Yes, that is the jacks we have on our Jayco. The installer did have to order an accessory part to complete the install but it is well worth the extra $20.00 bucks that cost!So stable now.

Product features

Easy to Install

The patented universal system is designed to attach to the three main types of jacks found on RVs: scissor, front landing gear and telescoping. JT’s Strong Arm Jack Stabilizers come in easy bolt-on kits of four or six stabilizer tubes.

Quick Facts

- Eliminates annoying chassis movement.

- Provides a rock steady camping experience.

- Dealer installation or do-it-yourself.

- One-time installation/permanently attached.

- Works with all types of jacks.

- Bolt-on installation — No welding required.

Full Line of Accesories

A full line of accessories are available so users can apply JT’s Strong Arm Jack Stabilizers to electric stabilizer jacks or jacks with round foot pads. We also offer replacement parts and tools, like the T-Handle, which makes tightening and loosening T-bolts a breeze.