10 best stabilizer jacks

Product description

Eaz-Lift's Olympian 24" Scissor Jacks fit pop-ups, trailers and other large vehicles. They allow for either bolt-on or weld-on installation. The scissor jacks have a certified 7500 lb. load capacity and are constructed of heavy-duty steel and powder-coated for maximum rust protection. Comes as a set of two. Measures 4-3/8-inches high when fully collapsed and 23-3/4-inches when fully extended.

• Effortlessly Stabilizes RVs: Scissor jacks have a certified 7500 lb. load capacity
• Easy to Install: Allows either bolt-on or weld-on installation
• Adjustable Height: Can be adjusted from 4-3/8-inches high to 23-3/4-inches
• Includes: scissor jacks and scissor jack socket for power drill
• Supports a Variety of Vehicles: Designed to support pop-ups, trailers and other large vehicles. Durable Construction: Made of heavy-duty steel and powder-coated to resist corrosion and rust

User questions & answers

Question:	Can anyone tell me about the life of this lift? I want to make a standup desk and i will be constantly cranking it
Answer:	only had 2 months but have used them to on a travel trailer about 20 times and it ways 2500ilbs and i use a cordless drill to do it
Question:	how much weight can they hold
Answer:	I'm using both of mine under 3k pounds of load, they are rated for 7500 pounds a piece
Question:	Does the socket or a handle come with the jacks
Answer:	Purchased in July 2018. Did NOT come with a handle or socket.
Question:	will a 3/4 inch socket fit the crank nut
Answer:	yes it will fit 3/4 inch.

Product description

Camco Olympian RV Aluminum Stack Jack Stands are designed to get secure and level RV positioning and stability. It is made from cast aluminum and can support up to 6000 lbs. These Jack Stands extend up to 17" and are easy to use.

• Get secure and level RV positioning and stability
• Each jack supports up to 6000 lbs
• Cast aluminum
• Adjustable from 11" - 17"
• Set of 2

User questions & answers

Question:	Does anyone know the size of the hex nuts that come with these jacks? I need a spare and Home Depot is useless for anything larger than
Answer:	your fan knows better than to open a window in cold weather.
Question:	I see at-least two people used these to make a standing desk. To those people: how stable is the desk?(how far did you lift it
Answer:	It is bright white. I am very happy with it.
Question:	for 4 of these which are each rated at 6000lbs each, free two day shipping (prime) and it's aluminum. Why shouldn't I get these for my car
Answer:	I just replaced the rear vent on my 1986 Sovereign with this. You WILL need to modify the roof. The stock Airstream vents have curved corners, this is hard angles, and slightly larger. I spent close to four hours on my roof and in the bedroom cutting from either side (and I also had to modify the vent's cowling, as the Airstream roof is only about two inches thick), but I'm still very pleased with the result.
Question:	What's the difference between these and car jack stands? Can you use these for cars
Answer:	I'm not completely sure what you're asking. Are you referring to the fact that, when run in thermostat mode, the dome is always open, and the fan is sped up, slowed down, or stopped? If so, I believe this is a conscious design decision. The fan itself is very quiet, but there's noticeable (albeit brief) noise generated when the dome lift motor is running. It would be annoying to have the fan cover constantly opening and closing itself (and create significant wear on the lift mechanism). Keep in mind that even when the temperature sensor in the fan measures the passing air at the thermostat set point and turns off the fan, oftentimes the objects inside the coach/camper are still at a higher temperature. As the cabinetry and appliances give off that heat, the interior temperature increases, and the fan must turn on again. In the current implementation, this is quiet and unobtrusive. Regarding the rain sensor, unlike one reviewer mentioned, my fan, when in rain sensor mode, will restart after moisture evaporates from the sensor strip. It does not stay closed indefinitely.

Product features

Camco 2 Pack 44561 Aluminum Camper Jack

Camco Olympian RV Aluminum Stack Jack Stands are designed to get secure and level RV positioning and stability. It is made from cast aluminum and can support up to 6000 lbs. These Jack Stands extend up to 17" and are easy to use.

Product description

Like a rock-solid race car chassis, JT's Strong Arm Jack Stabilizers use triangles — the strongest shape in nature — to eliminate unwanted chassis movement. One end of each stabilizer tube attaches to each landing gear leg and the other to the RV frame, forming a rigid triangle. There is no welding required and no need to remove and reattach during setup. It's permanent! When parked, JT's Strong Arm Jack Stabilizers telescope into place with the jacks.The patented universal system is designed to attach to the three main types of jacks found on RVs: scissor, front landing gear and telescoping. JT's Strong Arm Jack Stabilizers come in bolt-on kits of four or six stabilizer tubes.

• Eliminates annoying chassis movement
• Provides a rock-solid camping experience
• Dealer installation or do-it-yourself.Using a clean cloth, periodically wipe the arms with water to remove any salt or debris. Wipe dry with a clean, dry cloth when finished
• One-time installation/permanently attached
• Works with most jack applications
• Bolt-on installation; no welding required
• If unit has hydraulic jacks, three #314592 jack adaptor lugs are required

User questions & answers

Question:	How many stablizers are in the package? Is it enough for all 4 electric jacks
Answer:	There are 4 for the front and two for the back on my fifth wheel.If you have electric jacks in the back I think there's a kit you have to buy to keep them from hitting you jacks
Question:	Is it possible to install on a fifth wheel with an enclosed underbelly
Answer:	Yes Have installed them on Three 5th wheels 2 new 2015 and one older one. Only had a problem on the older one due to no support in the rear. They also have a hot line to call with any problems in installing them.
Question:	Does this set include all bars and hardware for front legs on 5th wheel trailer as well as rear scissor jacks
Answer:	Yes it does, note that the short one is for a different width than the standard
Question:	What's the difference between the 191023 and
Answer:	191023 is for a stnadard 5th wheel, 191024 is for a short 5th wheel (under 58 inches between the landing gear, and 191025 is dedicated for a travel trailer.

Product features

Easy to Install

The patented universal system is designed to attach to the three main types of jacks found on RVs: scissor, front landing gear and telescoping. JT’s Strong Arm Jack Stabilizers come in easy bolt-on kits of four or six stabilizer tubes.

Quick Facts

- Eliminates annoying chassis movement.

- Provides a rock steady camping experience.

- Dealer installation or do-it-yourself.

- One-time installation/permanently attached.

- Works with all types of jacks.

- Bolt-on installation — No welding required.

Full Line of Accesories

A full line of accessories are available so users can apply JT’s Strong Arm Jack Stabilizers to electric stabilizer jacks or jacks with round foot pads. We also offer replacement parts and tools, like the T-Handle, which makes tightening and loosening T-bolts a breeze.

Product description

Tired of waking up in your RV every time someone moves? Keep it steady with the Quick Products RV Stabilizing and Leveling Scissor Jack! This scissor jack is raised underneath your parked RV, giving it that extra bit of support needed to keep the rocking to a minimum. With up to 24” of extended reach, these jacks are sure to keep you and your RV steady. Note: The Quick Product RV Stabilizing and Leveling Scissor Jack is not for lifting purposes and is not intended to double as a tire jack or lifting the vehicle under any circumstance.

• Scissor jack raises underneath your RV to level and stabilize
• 5,000 lb. capacity
• Maximum height of 24”; Retracted height 4”
• Do not use for lifting purposes
• One-year replacement warranty

User questions & answers

Question:	If you can't lift with it, how can you claim it will level? And why call out capacity if it can't lift? Stablizing and leveling are not the same thing
Answer:	I hit a curb and bent an original jack so I had a plate already welded to the frame. Original holes matched and with new bolts we were in business. If this is a new install you will have to drill and tap the frame or craft a plate with holes and weld it to the frame.
Question:	Do these come with the fasteners to attache to trailer frame
Answer:	No. Unless you have a 5,000 lb mower and want to bolt them on.
Question:	How do they attach to frame
Answer:	Good morning Jim, thank you for contacting Lippert Components. The maximum stroke is 30" and the height when fully retracted is 3.76".
Question:	Can this be used for lawn mower
Answer:	Stabilizer jacks do have weight rating but don't know what these are rated at.

Product features

Quick Products RV Stabilizing and Leveling Scissor Jack - Set of 2

We've all been in an unstabilized RV before. Every movement inside and out leads to the RV rocking and shifting on its own suspension, swaying in the slightest breezes and bouncing under every step. This makes it tricky to walk, impossible to sleep, and quite honestly, it's just not safe.

Stabilize and level you RV at any campsite with Quick Products RV Stabilizing and Leveling Scissor Jacks! The jacks permanently mount to your RV so they are never left behind and always ready when you need them. When you arrive at your campsite, extend the jacks to the ground to both stabilize and level your RV. They operate easily and efficiently with the included speed wrench, but may also be driven by a non-impact style power drill (not included).

Note: The Quick Product RV Stabilizing and Leveling Scissor Jacks are not designed for lifting purposes and are not intended to double as a tire jack or for lifting the vehicle under any circumstance.

Also Available from Quick Products:

Need more reach? Look no further. The Quick Products QP-RVJ-S30 Stabilizing and Leveling Scissor Jack provides the same outstanding features as our 24" leveling and stabilizing jack, but boasts up to 30" of extended reach! Available individually or as a pair.

Quick Products QP-RVJ-S30 Stabilizing and Leveling Scissor Jack

Quick Products QP-RVJ-S30-2PK Stabilizing and Leveling Scissor Jack - Pack of 2

Quick Products

When you ask for Quick Products, you’re not just asking for a brand. You’re asking for a no-nonsense industry powerhouse with more RV accessories than you could ever haul with you. From campsite power to lifting power, trailer hookups to sewer hookups, platform steps to step stabilizers, Quick Products provides the never-leave-you-stranded reliability you want and deserve.

Product description

Like a rock-solid race car chassis, JT's Strong Arm Jack Stabilizers use triangles — the strongest shape in nature — to eliminate unwanted chassis movement. One end of each stabilizer tube attaches to each landing gear leg and the other to the RV frame, forming a rigid triangle. There is no welding required and no need to remove and reattach during setup. It's permanent! When parked, JT's Strong Arm Jack Stabilizers telescope into place with the jacks.The patented universal system is designed to attach to the three main types of jacks found on RVs: scissor, front landing gear and telescoping. JT's Strong Arm Jack Stabilizers come in bolt-on kits of four or six stabilizer tubes.

• Eliminates annoying chassis movement
• Provides a rock-solid camping experience
• Dealer installation or do-it-yourself
• One-time installation/permanently attached
• Works with most jack applications
• Bolt-on installation; no welding required
• If unit has hydraulic jacks, three #314592 jack adaptor lugs are required

User questions & answers

Question:	Will theee work if my scissor jacks are angled
Answer:	I don’t think they would work. I think it would put too much of a bind on the arms. The only way I can see how they would work is to leave the arm connector bolt on the scissor jack just a tad loose to allow it to swivel with the arm. But use a nylock self locking nut to keep the connecting bolt in place instead of the regular nut. Don’t want it falling apart !!!
Question:	I need a strut between the front electric jack legs to bolt the center bracket to. Does this kit include one
Answer:	My fifth wheel will need a "strut" welded between the front two landing gear. The frame doesn't connect between the I-beams (frame) in the front, so will have to have something welded.
Question:	Wath is the difference betwin models 191025,191023 and 191024 hapijack
Answer:	191023 Is for a 5th wheel with over 58" between front landing gear, 191024 is for a 5th wheel with under 58" between front landing gear, and 191025 is for a Travel Trailer
Question:	Will this work on electric scissor jacks
Answer:	Yes, that is the jacks we have on our Jayco. The installer did have to order an accessory part to complete the install but it is well worth the extra $20.00 bucks that cost!So stable now.

Product features

Easy to Install

The patented universal system is designed to attach to the three main types of jacks found on RVs: scissor, front landing gear and telescoping. JT’s Strong Arm Jack Stabilizers come in easy bolt-on kits of four or six stabilizer tubes.

Quick Facts

- Eliminates annoying chassis movement.

- Provides a rock steady camping experience.

- Dealer installation or do-it-yourself.

- One-time installation/permanently attached.

- Works with all types of jacks.

- Bolt-on installation — No welding required.

Full Line of Accesories

A full line of accessories are available so users can apply JT’s Strong Arm Jack Stabilizers to electric stabilizer jacks or jacks with round foot pads. We also offer replacement parts and tools, like the T-Handle, which makes tightening and loosening T-bolts a breeze.

Product description

Replacement motor for the standard Lippert Electronic Stabilizer system.

• Replacement motor for Lippert standard and ultra-light rear or front electric stabilizers
• Imported
• Manufactured by Klauber for Lippert
• Manufacturer model number C-300

User questions & answers

Question:	What are the measurments of the motor? I cant find a number on mine. I believe its a Lippert
Answer:	No. It has the locking cord that goes under the car but no bungee cords or clips
Question:	What motor fits my norco/bal type mc102c with a s# lt
Answer:	I’m not sure but it covers my 2011 Audi A4. Not sure of the exact dimensions, sorry
Question:	hi, i have a lippert rear stabilizer, but the motor that failed is some made in india brand, will this one fit
Answer:	It starts vibrating with aging and wear. The brushes wearing out, the bearings wearing out, the fan shaft starts bouncing a little. To test this; turn the fan blowing a little upwards instead of downwards, if the vibration stops, it is like I said, wear. What I did was taking the fan apart and put spacers inside on the front side of the shaft thereby taking out the ability from the shaft to bounce. However this does not stop the brushes wearing out.
Question:	I have a LC337199 stabilizer jack. Does this motor fit it
Answer:	Canada
Question:	Do these have a notch sticking out to put the bed pole on for a Pop up camper
Answer:	amazon Caframo Mounting Clamp Accessory f/Ultimate 747/757 (54344)
Question:	What is this handle that comes with each pair
Answer:	I don't see why not , as long as you have a hard top .
Question:	Are these aluminum or steel
Answer:	This particular fan has an on/off switch with 3 speeds. It also has a thermostat so that it will automatically go on at the set level. It is not in degrees like a household one so you have to experiment a little on where you want it set. This is the best fan out there.....unquestionably. You can also get a model with a remote, but I didn't think that would be useful for me. It also will blow in or out which is great depending on your need. I mostly vent out and it pulls fresh air in from the door or window.
Question:	What are the collapsed and extended dimensions of these stabilizers
Answer:	The dimensions are in the product description . Its fits the standard 12 inch x 12 inch opening on all rv's.

Product features

LCI Genuine Replacement Parts

Let’s face it, nobody likes sitting a road trip out or camping without all of your gear operating properly. That’s why we have an extensive line of LCI Genuine Replacement Parts to help you take the guesswork out of finding the right components for your RV, so you can get back on the road in no time.

Made for Your RV

From awning rollers and electric step motors to hydraulic pumps and remotes for your leveling system, with LCI Genuine Replacement Parts, you know you’re getting the gear you need to get the job done.

THE RIGHT PART

Our Genuine Replacement Parts are designed specifically for your RV’s equipment — helping ensure that you’re getting the correct component that matches your RV’s exact needs.

EXTENSIVE SELECTION

We offer a wide-variety of replacement parts to make it easier for you to find what you need without the hassle of shopping around for the right equipment.

BACKED BY A NAME YOU KNOW

Our Genuine Replacement Parts give you peace of mind on the open road.

COMPLETE SHOCK MOUNT KITS

SHOCK ABSORBING EQUALIZERS

FORWARD SELF-ADJUSTING BRAKES

REPLACEMENT SLIDE-OUT PARTS AND GEARS

CONTROLLERS AND ELECTRICAL PARTS

ACTUATOR MOTORS

Product description

Camco's RV Stabilizing Jack Pads help prevent jacks from sinking into the ground. They are compatible with stack jacks, fifth wheel stabilizers, swing down stabilizers and awning arms. Not intended for use with hydraulic jacks. Each pad features 6. 5 inches x 6. 5 inches of usable surface area. For convenient storage, they interlock and include a handy strap. Constructed of heavy duty, UV stabilized polypropylene. Includes a set of pads. Made in the USA.

• Helps prevent jacks from sinking into soft ground
• Interlocking design and handy storage strap for easy storage
• Built in handle for ease of use
• Measures 6.5" x 9" x 1"
• Set of 4

User questions & answers

Question:	will this fit the scissor stabilizing jacks for a small 21 ft jayco baha
Answer:	Do you mean dimension - or size?
Question:	That's the diminutions of these pads
Answer:	Yes they are big enough to for scissor jack feet. That is what I have on my travel trailer.
Question:	Are these pads big enough for scissor jack feet
Answer:	The description states it supports up to 6000 pounds (3 tons)
Question:	How many pounds will they hold
Answer:	Yes, this same cord but the packaging was updated. Sorry for the confusion, but it is still safe for outdoor use.

Product features

Stabilizer Jack Pad

Camco's RV Stabilizer Jack Pads are used to help prevent jacks from sinking into the ground. Use them with stack jacks, trailer tongues, 5th wheel jacks and swing arm supports. They have a built-in handle and a storage strap is included for easy storage. They are constructed of durable UV stabilized resin for years of use. Their heavy-duty construction and rib design are optimized for increased strength. Be sure to use with flat side down to help prevent slipping and sinking. Contains 4 jack pads.

Product description

Lippert Components 24-inch lift stabilizer jacks provide a cost-efficient way to stabilize your RV or trailer. Our manual stabilizer jacks feature easy, bolt-on installation and powder-coated, rust-inhibitive finish. This single stabilizer jack comes with mounting hardware.

• Lippert Components 24-inch manual stabilizer jacks are an easy and inexpensive way to add stabilization to your RV in order to reduce rocking and swaying
• Heavy gauge steel stabilizer jacks manually raise and lower with crank handle and add stability to RV fifth-wheel or travel trailer
• 24" rise
• Easy bolt-on installation
• Mounting hardware included

User questions & answers

Question:	How far apart are the bolt holes and what is the width of the upper fork or arm? My current bolt holes are 2" apart and the bracket is 2 3/8" wide
Answer:	I just talked to Tonya at Lippert who said that neither the 24" or 30" jacks come with a round foot pad. And there is no separate foot pad available. If some one has a Lippert or 3rd party part number for a round foot pad that will attach to the 30" bowtie foot, please post it.
Question:	What size is the bolt that raises and lowers the jack
Answer:	No, that’s too high
Question:	Does the 285344 30" jack come with the circular top and circular base
Answer:	I can't speak for the seller, but this is definitely to jack up your car (within the weight restrictions) to change a tire.
Question:	The pictures show a round base attached to the bowtie. Do these come with that round base
Answer:	Mine is 1 5/8" X 2 5/8"

Product features

Features

-Lippert Components manual stabilizer jacks are an easy and inexpensive way to add stabilization to your RV in order to reduce rocking and swaying.

-Heavy gauge steel stabilizer jacks manually raise and lower with crank handle and add stability to RV fifth-wheel or travel trailer.

-Easy bolt-on installation; mounting hardware included.

-Powder-coated, rust-inhibition surfaces.

Product description

The Camco Stabilizer Jack Support provides a strong, stable surface for stabilizer jacks when they don’t reach the ground, offering 7" of lift.

• Provides a strong, stable surface for stabilizer jacks when they don’t reach the ground
• Offers 7" of lift
• Constructed of durable, UV-stabilized polypropylene

User questions & answers

Question:	Can these be used under the leveling jacks on a class a motorhome when the site has a slight incline and rear tires are off the ground
Answer:	No
Question:	How much weight can these support each
Answer:	This is designed mare as a storage cover, I do trailer with mine but it tends to balloon up. So I put 3 bungees over it (front middle & rear) & then it stays put and No problems.
Question:	pack
Answer:	Up to 100" lengthThanks,Chris DeWaneMad Dog Products800-934-0840
Question:	If i stack 2 peices will it take the tongue load
Answer:	The storage bag is 18" L x 9" diameter.

Product features

Camco Yellow Stabilizer Jack Support - Provides a Sturdy

Description:

The Camco Stabilizer Jack Support is an 7-inch tall leveler that is great for use with stabilizer jacks that don't reach the ground. It can also be used with tongue jacks equipped with a footpad. The Stabilizer Jack Support is constructed of durable UV-stabilized polypropylene, and nests for storage if you own more than one.

• Provides a strong, stable surface for stabilizer jacks when they don't reach the ground
• Can also be used with tongue jacks equipped with a footpad
• Provides 7 inches of lift
• Nests for storage if you have more than one
• Constructed of durable, UV-stabilized polypropylene

Product description

Pair of flip down stabilizer jacks with handle, ideal for all types of RV, utility and cargo trailers.

• Adjustable from 11-1/2" to 17-3/4" vertical height
• Handle included with pair of stabilizer jacks
• Black painted finish
• 1000 lbs. support capacity per jack
• 650 lbs. lift support capacity per jack.

User questions & answers

Question:	What are the dimensions of the mounting plate
Answer:	I have the 203 for my 2019 Traverse which has a 204 LOA. It fits very comfortably with a little puff. The elastic and 3 straps eases my concerns for high winds and possible cover burns. You wIll definitely have a little extra with a 203.
Question:	How do they mount
Answer:	I can only answer in regards to my Eclipse convertible, which is 175" L / 68" W / 52" H ---- it covers the car completely and all of the tires. I do wish it had several layers of material rather than Only 1 layer, it would give it extra strength. Looks like thin Aluminum Foil Material. I advise to use the attached wind straps that connect easily, to keep it from blowing away in high winds, if parking on the street.
Question:	Where do they mount
Answer:	Yes it will fit. You can go to amazon to buy the cover but before you purchase a cover you can check by putting your model and year of car in box provided on screen
Question:	Does this come in a pair
Answer:	I bought a large cover and it fits loosely on my 2014 Porsche Boxster. It does go to the floor of my garage and I leave it on loosely.