14 best rubber roofs

Product description

Heng's rubber roof coating used to seal EDPM rubber roofs. Designed for use over RV rubber roofs, at seams and tears and to seal vents, air conditioners, etc.

• Designed for use over RV rubber roofs, at seams and tears and to seal vents, air conditioners, etc.
• It is UV resistant and expands and contracts with roofs
• Resists cracking and withstands impact, non-polluting and non-toxic
• Available in gallon size

User questions & answers

Question:	what is the coverage per gallon
Answer:	Product says 2 gallons will cover a 30 ft roof, but I found it was very thin. If you are touching up, then 1 gallon per 15ft of roof is correct. However, if your roof is now black instead of white (as mine was) you will need 2 gallons per 15x8 ft of roof to do a good, solid, opaque coat.
Question:	Can anyone confirm the color of this material is white
Answer:	I used this product on my RV rooftop. The coating is bright white. I used a roller to apply to the roof. The finish was reasonably smooth, but not slippery sleek. It is durable. In fact, I just cleaned my rooftop with a floorbrush and a bleach/soap/water mix. It washed clean, and the coating did not lift after a year of being applied. This coating does exfoliate like the rubber roof material, so the RV stayed cleaner and very minimal dirty black streaks from normal dirt. I rolled the coating, let it dry and went back to reseal a few places with the butyl caulk. I am happy with the result.
Question:	does hengs roof coat work well on rubber roof previously coated
Answer:	Yes, this product will work well on a previously coated rubber roof. Make sure all dirt/oils/grease is removed from the roof prior to application - recommend a hose and a cleaning/degreasing agent - I used Dawn dish liquid and a brush but others like Tide powder - both should give you acceptable cleaning results. Heng's has GREAT adhesion to all types of surfaces so you shouldn't have a problem.
Question:	Is this as good as Dicor
Answer:	This stuff is great. I've never used Dicor, I have a 30' toy hauler. 3 gallons gave me 3 coats with a good amount left over. Start with a clean roof.

Product description

Formulated specifically for RV rubber roofing. This bio-degradable deep cleaning formula lifts dirt and grime, yet gentle on the surface. Simply spray on, brush with a soft bristle brush and rinse off. For best results follow with decor roof guard roof Protectant.

• The package length is 57 inches
• The package height is 8 inches
• The package width is 11 inches
• Package Weight : 3.992 kilograms

User questions & answers

Question:	What's are the ingredients of the product
Answer:	My RV is 20 years old that we bought used a few years ago. The exterior wasn't in the best shape when we got it although the rig overall was in very good shape. When I used this product it made a very noticeable improvement to the finish, although as I put in my review it won't make it look new. The problem as I was told by a local detail shop was that the clear coat has simply worn away due to age and lack of proper care over the years. However, it made such an improvement in the appearance of the outside of the RV I was really impressed. It does make a difference on how the sun shines on it and the angle you look at it at but I suspect you might have the same issue as me. If your RV is newer and has been taken care of better than mine had, you may just have an issue with the application and buffing method you used.
Question:	How much uv protection does this product have
Answer:	Hi sam, this product is not a soap.so no you can't use it to wash your car or boat. This product is a one step wax, i use it after i polish a boat with meguiars 49 oxydation remover. I think meguiars 51 is the soap and you may use that one.
Question:	how much coverage does a gallon provide
Answer:	Black water/gray water tank deodorizer
Question:	How much quantity (gallons) do I need of the cleaner and sealer for a 31 foot class C motor home
Answer:	It all depends on when and how you grinder cycles. If it only cycles when it is say 3/4 full, and you put in the packet when it is almost empty, it will work just fine. If you drop it in just before it cycles, you will not get much benefit from the product.

Product description

Extend the life of your rubber Roof! Two part, commercial grade system combines a cleaner/ Activator necessary for proper roof preparation and an acrylic coating that provides an excellent protective barrier for extending the life of the EPDM rubber membrane. Saves over 25% in labor compared to similar systems. Quick drying time. Part 1: cleaner/Activator cleans and prepares EPDM roofing for maximum adhesion of acrylic coating. Spray on and rinse off thoroughly. Coverage rate of 1 Qt. Per 125 sq. Ft.

• Extends the life of your EPDM rubber Roof
• Saves more than 25 percent in labor compared to competing products
• Has a 1 quart to 125 square feet coverage rate
• Dries quickly
• Contains no harmful petroleum distillates, harsh abrasives or citric ingredients that can cause irreparable harm

User questions & answers

Question:	for already painted roofs is the cleaner/activator needed
Answer:	When I used the cleaner/activator the instructions said use the cleaner activator first to clean the roof and then apply the coating. The instructions said the cleaner/activator would cause the coating to adhere properly through some sort of chemical reaction process. Not sure if your term “paint” means the coating that is like a paint but is actually a specialized coating.
Question:	do you have to put plastic on camper sides to protect camper from roof coating, or just careful when you apply
Answer:	Yes. unless you are in perfect weather and there isn't a hint of breeze or you just don't care that the fine mist when unintentionally landing on that beautiful wrap you have will leave spots that will eat the wrap and well just let your imagination work. . . We spent 89 cents a roll and bought 6 rolls, for thin painters plastic that we used blue tape all around our 40ft motorhome. One year we used walmart discounted weatherization plastic with adhesive on one side.
Question:	Do you need to apply this between the coats of sealing paint? As in do i need to use this primer then paint then primer again then paint
Answer:	Not according to the instructions. It is the cleaner/activator and does an excellent job of cleaning. The activator part is just to prepare the old roof material that has weathered so the new coating adheres solidly. If you apply two coats of the roofing material and the second coat is added shortly after the first coat, within hours or days you should not need the cleaner activator between coats.
Question:	I have a 2001 fleetwood pace arrow how do i know what the roof material is? the white coating is almost gone
Answer:	I looked at your specs on line you have a rubber roof.

Product description

Liquid Rubber Waterproof Sealant is an environmentally friendly coating that is easily brushed on and cures into a waterproof membrane. It can be used in many applications where you need to create a watertight seal. Flat Roofs, Metal Roofs, Sloped Roofs, Planter Boxes, Foundations, Sheds, Basements, Metal, Wood, Concrete and more. Use Liquid Rubber Seam Tape or Liquid Rubber Geo-Textile to bridge seams, joints, vents, protrusions to create a long lasting repair or rejuvenation.

Apply when temperature is above 40F/5C. Apply to a dry surface, free of dirt, loose flaky paint and coatings, oil, grease, coal tar or other contaminants. Typically cures within 24-48 hrs. Do not freeze. Store in a warm area. Do not apply in wet conditions or if rain is forcasted within 24 hrs. Not meant as a constant walking surface.

Coverage - Vertical Surfaces - Apply a minimum final thickness of 1 gallon/30 sq ft (2.8 sq m). It should require around 3-4 heavy coats to achieve a 30 mil (0.76mm) (DFT) membrane.



Flat/Ponding Surface - Apply a minimum final thickness of 1 gallon/15 sq ft (1.4 sq m). It should require around 4-5 heavy coats to achieve a 60-80 mil (1.5-2mm) (DFT) membrane.

Apply next coat when dry to touch and nothing is wet underneath; tacky is okay.





Generally 12-24 hrs between heavy coats. Amounts vary depending on surface roughness.



Use all material up to achieve a long lasting membrane.



Avoid hot, direct, intense sunlight during application. Remove Painters Tape while still wet. Membrane will turn brown in ponding situations due to surfactants. Will dissipate over time as the water cycles and cleans.

Clean Up - Use soap and water or mineral oil to clean skin.

100% MONEY BACK GUARANTEE - If you need to return anything, we'll refund your full order amount. We ask the material be unopened, in new condition and you ship the product back to us within 90 days.

• PROTECTIVE FINISH FOR - Flat roofs, metal roofs, sloped roofs, planter boxes, foundations, sheds, basements, metal, wood, concrete and more
• HIGHLY FLEXIBLE & DURABLE - Final membrane has over 1000% elongation preventing adhesion failure, and is UV Stable stopping the sun from degrading the product
• COVERAGE - Vertical Surfaces - 1 gallon/30 sq ft (2.8 sq m). 3-4 heavy coats to achieve a 30 mil (0.76 mm) membrane. Flat/Ponding Surfaces - 1 gallon/15 sq ft (1.4 sq m). 4-5 heavy coats to achieve a 60-80 mil (1.5-2 mm) membrane
• ENVIRONMENTALLY FRIENDLY - Liquid Rubber Waterproof Sealant/Coating is water based, containing no solvents, VOC's or harmful odors. Safe for humans and pets alike, can be used indoors and outdoors with no special breathing apparatus
• FOR A BULLETPROOF SYSTEM - Bridge joints, seams, vents, gaps, protrusions…. With Liquid Rubber Seam Tape or Liquid Rubber Geo-Textile where possible movement may occur

User questions & answers

Question:	I have a black plastic pond i got from home depot. will it adhere to that material
Answer:	You can apply protectant by using lambswool First wipe off all excess product or this may make the shades tacky. Next, apply with lambswool applicator allowing this to sit for ten minutes. When finished wipe off with a rag. Lastly wash the applicators and the rags with warm soapy water and lay outside to dry.
Question:	I want to seal hardi plank siding. adheres to hardi plank installed vertically?...cement type materials
Answer:	Between 50 and 100 degrees Fahrenheit is ideal. It is best to apply when the weather has been dry and sunny for at least 24 hours, and when no rain is forecast for 24 hours. Thank you for your inquiry.
Question:	How long does new concrete need to cure before applying liquid rubber? We are sealing our new concrete pond with this product = will not have fish in
Answer:	Yes. Make sure that all coatings the manufacturer may have applied have worn off. Then just clean and treat!
Question:	can use to seal koi pond
Answer:	I don't believe there is any warranty. We applied it two years ago and the covered areas still look good. The section in direct Sun...needs to have it applied again.

Product features

Liquid Rubber Waterproof Sealant

The perfect product for a roof restoration or planter box, Liquid Rubber Waterproof Sealant works by creating a watertight seal to keep moisture where you want it. With multiple uses, the possibilities are endless.

Make it a home project

Skip the hassle and cost of contractors and make it a DIY project. From big projects to small projects, accomplish it yourself with the easy application of Liquid Rubber Waterproof Sealant. Simply apply by using a brush or roller. It's so easy, anyone can do it.

Highly Flexible

Liquid Rubber Waterproof Sealant is highly flexible once cured. With over 1000% elongation, you don't have to worry about minor movement destroying all your hard work. Still worrying about movement? Bulletproof your work with the help of Liquid Rubber Seam Tape or Geo-Textile.

Liquid Rubber Waterproof Sealant is UV Stable so the sun will not degrade the product.

Easy to Apply

Basically just like painting except you use heavy coats to build up your waterproof membrane. Open the container and start using. You can close the container and use later if you have left over material. No pot life or working time like 2 component products. Apply by Brush, Roller or High Quality Piston Paint Sprayer.

Endless Possibilities

This nature-friendly product allows for an endless possibilities of usage. When you need a watertight seal, think Liquid Rubber. Use for roofs, gutters, planter boxes, ponds, sheds, mobile homes, metal, wood, concrete and more. Empower the DIYer in you with Liquid Rubber.

• Lightweight - Single ply roofing is half the weight of EPDM
• Will not chalk, fade, or streak
• .165 lbs./sq. ft.
• .028" thick

User questions & answers

Question:	Temperature range for install? Any duration of said temperature after install
Answer:	Temperature when I installed the rubber roof was in the 90s. Had to do the roof when weather permitted, summer been very rainy.
Question:	Temperature range for install? Any duration of said temperature after install
Answer:	My husband took one whole day putting this rubber roof on. It was very hot that day the roof did fine in super hot temperatures but I would suggest doing it on a cloudy day. Not because of the roof but because of maybe a heat stroke. We would buy another if need to.
Question:	Does it have instructions? Found none in the order I just received
Answer:	It does not come with instructions, but they do have a video on their website. I think there was one on youtube also. Suggestion is make sure that the roof is really clean because every little piece of debris will show up as a lump, lay it on the roof before you glue it and do the roof 1/2 at a time not every couple of feet like some of the videos online show.
Question:	Is it shipped folded or rooled
Answer:	I can only verify information on item sold by classAcustoms Item is folded and ships in two boxes.

Product features

What is Included in the Kit

• 30 Feet of SuperFlex by 9.5 feet
• 5 tubes of Self Leveling Sealant (11 oz)
• 4 Rolls of Butyl Tape (30' L)
• 2 Gallons of Rubber Roof Adhesive (8010)

Benefits of the RecPRo Superflex 9.5' Wide Rubber Roof Kit (30 ft)

• Will not fade, leave streaks, or chalk
• Resistant to algae, fungus, and mold
• Amazing UV performance
• Puncture and tear resistance
• Color is same throughout
• 100% solids sealant (will not shrink or crack)
• Non-skid surface for better traction
• Flexible for perfect snug fit around corners and sides
• Easily repairable

Product description

Based on a high-performance synthetic rubber compound, RubberGard EPDM membrane exhibits outstanding resistance to UV radiation, the ozone, and weathering from the elements on rooftop installations. RubberGard EPDM provides excellent low temperature properties and longer service life. With an environmentally-aware membrane that is recyclable in many situations, the system’s thermal-performance may reduce energy consumption. Firestone RubberGard EPDM Roofing Rubber Liner system can be fully adhered, ballasted, and mechanically attached during installation. Contractors, building owners, architects, and specifiers have trusted Firestone Building Products for superior commercial roofing systems for nearly 30 years. With billions of square feet installed globally, and with a commitment to environmentally-friendly initiatives, Firestone has become the preferred supplier of roofing systems throughout the world!

• 45 mil Liner: The Most Popular Material for New And Re-Roof, Low Slope, Roofing Applications
• Outstanding Durability And Low Life Cycle Cost Means Excellent Value
• Easily Contours to Unusual Roof Shapes. Perfect for Do-It-Yourself Homeowners or Roofing Contractors
• Flexible Material Allows Design Versitility and Easy Installation
• NOTE: If using for a deck or a roof, make sure you order a liner size slightly larger than your dimensional needs. We don't want to sell you more than you need, but getting an EXACT size will not be sufficient to cover your deck or roof correctly.

User questions & answers

Question:	Can this be used under porcelain tile on a deck
Answer:	As long as there are no sharp edges on the bottom of the tile. You will also need to make sure the Thinset you plan to use with adhere to rubber.
Question:	Will a chalk line stick to this product
Answer:	An oil based chalk will stick relatively well where a more powder based chalk will be easily wiped off. If you need specific information regarding marking your EPDM Roofing Rubber, it is recommended to contact the seller directly via Amazon messages. Thank you!
Question:	I am building a small deck on a roof. Would this material work well as a roof and a surface to walk on? Does it have a texture to it
Answer:	It is commonly used for flat roofs. It is smooth, no texture. While you can "walk" on it I would not recommended it for use for the top surface of a deck.
Question:	Can i use this on top of corrugated metal roofing
Answer:	It’s a vulcanized rubber so it won’t melt It’s an effective rain barrier but it will not conform to the rippled corrugated roof, unless It is glued down

Product description

Extend the life of your rubber roof! Two part, commercial grade system combines a cleaner / activator necessary for proper roof preparation and an acrylic coating that provides an excellent protective barrier for extending the life of the EPDM rubber membrane. Saves over 25% in labour compared to similar systems. Quick drying time. Part 2: Acrylic Coating is an excellent protective barrier extending the life of your rubber roof membrane. Provides superior weather ability, UV resistance. Use with Dicor Rubber Roof Cleaner/Activator for proper adhesion. Requires two coats. Coverage rate of 1 gallon per 125 sq. ft. per coat.

• Well Suited for Retrofit Installations
• Flexes very well
• Eliminates irritating roof rumble
• Requires less lifetime maintenance
• Specific Gravity:1.41

User questions & answers

Question:	foot RV roof how many gallons do I need
Answer:	Depends on how many coats you want. If your roof is black down to the rubber, if put a minimum 3 coats. 1 and a third to 1 and a half gallons per coat for a 38 foot.
Question:	Can this have a color added to it? Looking for black
Answer:	Being a long time rv'er, black would be a terrible color. It will fade quickly and bake in the summers, especially if you live in the south.
Question:	can this go over Eternabond roof sealer
Answer:	Just to add to the above answer, Eternabond Roof-Seal has shiny white roofing film, possibly pvc roofing, that is meant to be the top protective layer. To coat this product, you could rough up the finish with coarse sandpaper or use a roof primer made specifically for this purpose. It comes in spray on or brush on. I used a different Eternabond product, called Web-Seal. It has a knitted polyester fabric top, that is made to accept coatings, like Liquid Roof, Dicor, or cheaper elastomerics.
Question:	Does this product protect against sun damage
Answer:	Yes. It protects the ultra violet light from damaging the EDM rubber top. That's the main purpose of the product. Without the coating, the top will start to turn to chalk and or crack causing leaks. Was a lot of dirty work, but saved me from needing to replace the EDM rubber top {$3500.00 to $4500.00. Hope this helps to answer your question.

Product description

Description:

RV Roof Maintenance is extremely important. The last thing you want is to deal with a leak on your next holiday. RV Flex Repair Sealant/Caulking provides the security you need. Once you use it, you can rest assured that you'll be warm and dry.

Directions:

1. Remove any silicone.

2. Remove any loose caulking or flaky coatings that are not silicone. If it’s adhered well, you can apply the Sealant over it.

3. Clean well (Acetone or Rubbing Alcohol works). Ensure clean surface before applying.

4. Cut tip to size and puncture internal seal. Small screwdriver works well.

5. Apply RV Flex Repair Caulking in dry or wet conditions.

6. Covers 25 linear ft of seams per 10 Oz tube.

7. Curing - Skins over in 30 minutes, Tack Free - 2 hours

Tips:

Works on EPDM, Metal, Aluminum, PVC, Kynar, Wood, Concrete, Fiberglass.

Can paint over after 24 hrs.

Apply in 35C temperatures and rising.

Will stick to RV Flex Repair Tape.

Adhesion increases over time.

Roughen/Sand plastic surfaces before applying.

Working Temps: -40F to 200F

Compare with dicor rubber roof products, proflex rv sealant, geocel.

Store in low humidity , cool environment

Seal spout after using

• LIFETIME WARRANTY & GUARANTEE - No other RV product on the market compares to our RV Flex Repair's Quality or Lifetime Warranty
• RV ROOF MAINTENANCE - The easiest, most efficient way to complete your RV Roof Restoration in 1 weekend is with the RV Flex Repair System; Compatible with RV Flex Repair Roof Seam Tape and RV Flex Repair 100% Silicone Roof Coating
• ECO-FRIENDLY PRODUCTS - Ziollo professional-grade RV Flex Repair Caulking Sealant non-hazardous formula is safe to use indoors and outdoors, non-toxic to you, your family, or pets
• WATERTIGHT SEAL - RV Caulking Sealant prevents leaks with its waterproof and breathable seal that will not shrink and stays flexible
• WEATHER PROTECTION - RV Flex Repair Caulking is an easy application for lasting results with your RV upkeep; Caulk works on a variety of surfaces, including EPDM Rubber Roof, Metal, Wood, and Fiberglass blocking dirt, dust, and moisture

User questions & answers

Question:	Can I use this on shower tub which has a crack
Answer:	I wouldn't use it for a tub repair. It's a self leveling compound that stays somewhat soft.
Question:	Can this be used with epdm rubber roofing
Answer:	Hi, yes the RV Flex Repair Self Leveling Caulking Lap Sealant can be used on EPDM Rubber Roofing. Ensure a clean, dry surface before application.
Question:	Will this fill and adhere to holes in vinyl fence
Answer:	It is meant to be used on a flat surface, but it should adhere to pvc but will need to be on a flat surface.
Question:	Is it good on fiberglass roof
Answer:	Hi, yes you can use the RV Flex Repair Caulking Lap Sealant on fiberglass roofs. Make sure to rough up the surface first.

Product description

What's the difference between Superflex roofing and EPDM Rubber Roof? Here's some major benefits to switching over to Superflex roofing. **ITEM SHIPS folded in a box - it is recommend that you remove it from the box as soon as you receive it. Lay it flat and allow it to "relax" for several hours before installing, this will allow the temporary creases that may have been caused by folding to come out as the item "rests". ** *Lightweight - get better gas mileage (.165lbs/sq ft. compared to EPDM at .29 lbs/sq ft.) *Does not chalk (won't turn side of unit gray) *Stronger - won't puncture as easily like EPDM *Can be easily repaired *Stretches easier so you can get a perfect tight fit *Better traction with a non-skid surface *Color is same throughout substrate *Will not shrink or crack (100% solids sealant) *.028 Thick

• 35 Feet of SuperFlex by 9 1/2 feet
• 5 tubes of Self Leveling Sealant (11 oz)
• 4 Rolls of Putty Tape (1/8" (thick) x 3/4" W x 30' L)
• 2 Gallons of Rubber Roof Adhesive
• **ITEM SHIPS folded in a box - it is recommend that you remove it from the box as soon as you receive it. Lay it flat and allow it to "relax" for several hours before installing, this will allow the temporary creases that may have been caused by folding to come out as the item "rests". **

User questions & answers

Question:	Can u order this liner in grey
Answer:	White only
Question:	Does this come on a roll when shipped
Answer:	No. It comes folded in a box.
Question:	Is this tpo, epdm or a pvc material
Answer:	Pvc
Question:	Is this white roof
Answer:	The item sold by Class A Customs is white. Thank you.

Product description

Camco’s Pro-Strength Pro-Tec Rubber Roof Care system is a two-step treatment. Step one removes black streaks, oxidation and road film build up on your rubber roof and helps protect it from further damage. Its specially formulated blend of surfactants and conditioners deep cleans and conditions your rubber roof, helping to extend its life. Step two helps resist dirt, protect against UV damage and reduce roof chalking. When used together, the Camco Pro-Strength Pro-Tec Rubber Roof Care System helps reduce your future maintenance cost by cleaning, conditioning and protecting your RV rubber roof.

• Deep cleans RV rubber roofs
• Helps extend roof life with UV protection and dirt resistance
• Cleans away tree sap, oxidation and road grime
• Helps reduce future maintenance
• Two-step treatment

User questions & answers

Question:	How much does this product cover
Answer:	My pull trailer is 8.5 wide by 28 feet long on the box. I was not stingy with the product and I used about half of each of the jugs. I believe the product calls for two coats on the finish coat and that is what I did.
Question:	Can both be used on all of my travel trailer or just the rubber roof
Answer:	Just the rubber.
Question:	Can this product be used on all rubber roofs? epdm safe
Answer:	Hey Douglas, these are EPDE safe. Not recommended for TPO roofs. The Protectant part, Part 2, is not required for TPO roofs. You only need Part 1 for TPO roofs.Give us a call at 800-334-2004 or email us at [email protected] if we can be of further assistance. Thank you.
Question:	How do you clean the roof, mop and bucket of water? Product go into bucket or on roof? You don't have to rinse the roof off with a hose and water
Answer:	I cleaned my RV roof off by using a scrub brush connected to a broom handle. I would pour the cleaner (I don't recall if I had to mix it with water or not but I followed the directions on the container), on the roof and scrub it back and forth a few times to loosen the dirt and I would keep a hose up on my roof at the same time, that way I could do a section at a time, and hose it off before it had a chance to dry. Also hose off the sides so the dirty residue from the roof doesn't leave drip or stain marks

Product features

Camco Pro-Tec RV Rubber Roof Care System

This innovative 2-step Roof Care System is a must-have for every RV owner! Protects your rubber roof against the elements to reduce roof chalking and minimize maintenance. Contains a gallon of Pro-Tec Rubber Roof Cleaner and a gallon of Pro-Tec Rubber Roof Protectant.

• Deep cleans RV rubber roofs
• Helps extend roof life with UV protection and dirt resistance
• Cleans away tree sap, oxidation and road grime
• Helps reduce future maintenance
• Two-step treatment

Product description

Heng's rubber roof coating used to seal EDPM rubber roofs. Designed for use over RV rubber roofs, at seams and tears, and to seal vents, air conditioners, etc.

• Designed for use over RV rubber roofs, at seams and tears and to seal vents, air conditioners, etc.
• It is UV resistant and expands and contracts with roofs
• Resists cracking and withstands impact, non-polluting and non-toxic

Product description

Cleans and Protects in one application. No two step system needed. Extends the life of your rubber roof matting by cleaning and conditioning in one easy application. Professional strength, non-petroleum formula safely and easily cleans streaks, oxidation and road film as it moisturizes, conditions and preserves your rubber roof. We recommend that you clean, condition and protect your rubber roof at least twice a year. This will help prevent mold, mildew and fungus growth as well as give your roof that continuous new look and provide added years to your roofs life. Do not use a silicone protect on your roof as it will actually attract mildew and fungus growth. 128 oz. bottle.

• Extends the life of your RV's rubber roof matting by cleaning and conditioning in one easy application
• Professional strength, non-petroleum formula
• Easily cleans streaks, oxidation and road film as it moisturizes, conditions and preserves your rubber roof
• Help prevent mold, mildew and fungus growth
• Size: 128 oz bottle

User questions & answers

Question:	Will it remove black moss
Answer:	Super easy. This is the best stuff ever!! You spray it on and wipe it off. No elbow grease involved. Best product to remove black stains.
Question:	Does it have to be wash off after applied
Answer:	on aluminum siding - does a great job - don't know about rubber roof tops
Question:	what is the coverage
Answer:	No not at all. I use it on my black harley saddlebags, (fibreglass) and my tank and fenders, (metal). Workes great!
Question:	can you use dawn to wash it of sides
Answer:	Shake Well. Apply to washed and dried surface. Apply in cool shade. Dispense on 100% cotton Terry cloth towel or applicator pad. Rub thoroughly into surface. Let dry to haze. Wipe off excess wit separate clean Terry cloth towel or microfiber cloth. Repeat on each section. Keep off cloth, vinyl and rubber area. This product is used for fiber glass roofs or siding. It works great.

Product description

Seal any rip, tear, or open seam in any surface with RoofSeal. RoofSeal is the best solution for leak repair It is the choice of professional roof repair specialists, on virtually all roof types including EPDM, TPO, Hypalon, most PVC, all metals, even copper and kynar coated metals, tiles, wood, concrete, etc. RoofSeal even works great on land-fill and pond liners. EternaBond specialized backing has proven to be UV stable, even after 19 years in full sunlight. EternaBond MicroSealant has a built in primer which allows RoofSeal to bond with the surface it is installed on. Perfect for re-seaming all roofs, regardless of the material. RoofSeal makes a permanent water-tight seal.

• 2" X 50'
• Color - White
• Seal any rip, tear, or open seam
• Can be used on all types or surfaces for RV, Trailers, Homes

User questions & answers

Question:	I want to use this on the end of my camper but there are some metal rods & screws will it bond around that pretty well
Answer:	As long as you can press it down securely to the surface to initiate the bonding, you should be okay. You might want to consider a wider version of this like the 4 inch.
Question:	After application, can I seal over this with henge’s rod sealer
Answer:	I have no idea about "henge's rod sealer," and I couldn't find anything when I googled it. I sealed over mine with Dicor self-leveling lap sealant. It's holding up great.
Question:	How long has this item been on your shelf
Answer:	I've been using it for two years. I've used it on leaks and it is bulletproof. It's expensive but once it's on, you will need a razor blade to get it off.
Question:	you need to use the spray primer? It does not have good reviews but I don't see where it is saying it is required in the remarks for the tape
Answer:	I used it two month ago without the spray primer and it seem to be doing a very good job. Just make sure the surface is clean and free of dirt. I used alcohol.

Product description

What's the difference between Superflex roofing and EPDM Rubber Roof? Here's some major benefits to switching over to Superflex roofing. **ITEM SHIPS folded in a box - it is recommend that you remove it from the box as soon as you receive it. Lay it flat and allow it to "relax" for several hours before installing, this will allow the temporary creases that may have been caused by folding to come out as the item "rests". ** *Lightweight - get better gas mileage (.165lbs/sq ft. compared to EPDM at .29 lbs/sq ft.) *Does not chalk (won't turn side of unit gray) *Stronger - won't puncture as easily like EPDM *Can be easily repaired *Stretches easier so you can get a perfect tight fit *Better traction with a non-skid surface *Color is same throughout substrate *Will not shrink or crack (100% solids sealant) *.028 Thick

• 30 Feet of SuperFlex by 9 1/2 feet
• 5 tubes of Self Leveling Sealant (11 oz)
• 4 Rolls of Putty Tape (1/8" (thick) x 3/4" W x 30' L)
• 2 Gallons of Rubber Roof Adhesive
• **ITEM SHIPS folded in a box - it is recommend that you remove it from the box as soon as you receive it. Lay it flat and allow it to "relax" for several hours before installing, this will allow the temporary creases that may have been caused by folding to come out as the item "rests". **

User questions & answers

Question:	Do I need primer before using caulk around vents and skylight
Answer:	no to my understanding back in the day I get rid of the old and coat the new heavily with a brush
Question:	My rv roof is 8'3" wide. can i make the 8.5 product work or do i need to go with this
Answer:	I’m sure a tech who has replaced many RV roofs could probably get away with the 8.5’ membrane. I have an 8’3” roof and opted for the 9.5’ kit. I have years of experience building and remodeling but only the second time working on an RV. I started as straight as possible but by the time I made it to the other end I had 1/2” over on one side and 12” on the other! It turned out great but if I had tried to use the 8.5’ membrane it would not have worked.
Question:	Which side does the rubber go down? Smooth down or rough down
Answer:	the smooth side goes down
Question:	Is it waterproof
Answer:	Yes this is what I put on my camper roof.