10 best boat windshield wipers

Product description

With this Seachoice Self-Parking Windshield Wiper Kit, you can easily install a windshield wiper that will keep your boat’s windshield free of spray and rain to enhance your visibility on the water. This Windshield Wiper mounts to the windshield frame and has a corrosion-resistant stainless steel motor housing for durability and trouble-free performance. The 12-volt motor pivots the shaft that is 1 7/8-inches long and has a 3/8-inch diameter. The adjustable wiper arm has a 110-degree maximum sweep and hosts the 11-inch wiper blade that effectively keeps the windshield clear. Seachoice is committed to delivering quality marine accessories and OEM replacement parts to satisfy fishing, boating and watersports enthusiasts worldwide. Seachoice is run for and by boaters, offering a wide-ranging product line while remaining affordable.

• Reliable windshield wiper keeps boat windshield free of spray and rain
• Enhances visibility on the water for better awareness of traffic and surroundings
• Corrosion-resistant Stainless Steel 12-volt motor housing
• Wiper mounts securely to boat windshield frame
• Effective 11-inch wiper blade is mounted on adjustable arm with full sweep of 110 degrees
• Shaft measures 1 7/8 inches long with 3/8-inch diameter

User questions & answers

Question:	Arm length
Answer:	The arm lenght is the lenght of the arm It will adjust in and out to fit the window better.
Question:	what is the size of the housing,how deep is it
Answer:	approximately 5"
Question:	Will this wiper work in a John Deere 2017 Gator 590i
Answer:	Can't answer for sure without knowing the details of the John Deere. You have to look at the specs on the motor shaft diameter, shaft length, and sweep arc, and compare it to your tractor. It's an exact fit for the windshield on my boat, but your application may be completely different.
Question:	is this a waterproof model? would be mounted on windsheld that is exposed to rain
Answer:	I would have to say it is not totally waterproof. Mine is mounted inside out of the weather
Question:	How big is the base
Answer:	It's about 2 1/2 inches from front to back and about 4 inches from side to side.
Question:	will this work with an old radio to get FM service
Answer:	I doubt it. It is a cable type connection, not designed for a two screw connection.
Question:	What is the range in miles
Answer:	I pickup 49 channels from 5 antennas in my area that range 7-16 miles from me according to antennaweb.org. Basically, every station rated as needing a "yellow" class antenna.
Question:	Since it enhances fm reception, too, how does it plug into a typical am/fm radio
Answer:	In order to use this as a FM antenna your receiver must have coaxial input or you need an adapter.

Product features

The Seachoice Commitment

Seachoice is committed to delivering quality marine accessories and OEM replacement parts to satisfy fishing, boating and watersports enthusiasts worldwide. Seachoice is run for and by boaters offering a wide-ranging product line while remaining affordable.

Quality

Seachoice marine accessories and OEM replacement parts are manufactured to rigorous standards to ensure proper function and first-rate appearance.

Selection

From anchors to anodes, Seachoice offers a wide range of products designed to make your experience on the water safer and more enjoyable.

Value

Seachoice is operated by boating, fishing, and water sports enthusiasts like you who appreciate quality and selection at an affordable price.

Product description

Deluxe 304 stainless steel curved wiper blade with marine grade silicone rubber squeegee. For use on flat or curved windshields.

• Deluxe curved wiper blade
• 304 stainless steel construction
• Marine grade silicone rubber squeegee
• For use on flat or curved windshields
• Length: 16"

Product description

The marine wiper motor kits are designed for light duty applications. This 12V, CE certified compact-sized motor is designed to accommodate small windshields and is set to an 80 degree wipe angle. In addition to the wiper motor, the kit contains a 10"-13" adjustable stainless steel wiper arm and an 11" marine quality wiper blade.

SQ112080SSK Wiper Motor Compatibilities

AFI Marinco Cross

• 32001
• 32000
• 30004
• 30000

• Marine quality CE certified, sealed wiper motor
• Kit contains 12V motor, 10"-13" adjustable radial wiper arm, and 11" wiper blade
• 1" pinch bolt type shaft on wiper motor
• 80 degree wipe angle

User questions & answers

Question:	What is the length of the wiper blade
Answer:	Blades are 11 inch . The arms adjust looks like from 10 to 13 inch . Very happy with mine
Question:	How to wire the red goes to + and black to - wher does the yellow wire go
Answer:	The third wire is self park
Question:	Is it self parking? Can it park on the right
Answer:	No it's not self parking. It's garbage. Find something better
Question:	Does it come with an off/on switch
Answer:	You will have to buy a rocker switch separate. Does not come with the unit.

Product description

Fit for the following models:

Polaris Ranger 570/800/900/1000

Polaris RZR 800/900/1000 XP

Polaris General 1000

Golf Cart

Kawasaki Mule

Kawasaki Teryx

KUBOTA RTV

Can Am Commander

Can Am MarverickX3

Honda Pioneer

CASE

Kymco UXV

Yamaha Rhino



Features:

1) Keep a clear view of the trail ahead when the mud gets splashed up or if it starts to rain.

2) 16" Soft rubber blade, glide smoothly; 22" from the center for the handle to the end of the wiper.

3) Special design reduces noise for silent wiping.

4) Durable to use and won’t rust or rattle.



How to Install:

1. Drill a 1/2" hole in your windshield for mounting.

2. Joint the wiper arm with the cross-pillar, which is in the middle of the wiper blade.

3. Put in vertical direction. The wiper arm would be stuck in the blade.

4. Install the whole kit.



Package includes:

1* UTV Manual Windshield Wipe Set

• [Fitment/Compatibility] Universal manual windshield wiper set fits for most UTV’s, including Polaris RZR 900 Ranger 900 Can am Honda pioneer 1000.
• [Perfect Replacement] Fit perfectly for hard coated polycarbonate or glass windshields.
• [Size] 16" Rubber Blade. 22" from the center for the handle to the end of the wiper.
• [Easy to Install] You just need to drill a 1/2'' hole in your windshield to mount it.
• [No Noise or Scratches] Improved airflow aerodynamics makes it free of noise and scratches.

User questions & answers

Question:	does it work on a 2 piece wind shield
Answer:	it should as long as it is flat.
Question:	Will it fit Honda Pioneer 700 widesheild
Answer:	Yees it will
Question:	Will this work on a 2018 Polaris General
Answer:	It is pretty universal--We have a side by side and it should fit almost anything with a big windshield. I definitely would buy it for the polaris 1000.
Question:	Wil this fit the maverick trail
Answer:	I installed mine on my Trail

Product description

Anco Wiper Arms are used to connect the wiper motor to the wiper blade. These wiper arms push the blades to the windshield, increasing their efficiency of keeping the glass clean. These arms drag the rubber strip across the windshield to clear objects without streaks.

• Connects wiper motor to the wiper blade
• Increases the efficiency of keeping the glass clean
• Provides even pressure over the length of the rubber blades
• Clears objects without streaks
• Easy to install

User questions & answers

Question:	Will this work on a 1977 Scout II
Answer:	This has a 1/2inch spline to mount. If your shaft has the same size it should work
Question:	Will it fit 2006 Hyundai Sonata
Answer:	No. It fits a Sea Ray Cruiser boat
Question:	What size shaft does this arm fit on
Answer:	The wiper arm knurl is .53 inches and there is an insert that will take it to .29 inches
Question:	is fthis fits t0 my 2004 honda crv
Answer:	I seriously daut this will fit a 2004 Honda CRV or any late model Honda, I think it fit's old model VW beetles and old model American car's mostly !

Product description

12-volt windshield wiper motor conversion kit from Omix-ADA.

• 12 Volt
• OE Style
• Direct Fit
• Reliable power for your windshield wipers
• Limited 5 Year Warranty

User questions & answers

Question:	how do you install it? where do the components actually go?? No instructions included
Answer:	this is installed on the inside of the windshield frame. on my old jeep cj5 there was a hole where the original wiper went. if you dont have whole all the way through the windshield frame, you will have do drill one starting from the outside in. the components should easy to figure out. you will have to run the wire from the new wiper motor to a power source under the dash, or the ign switch. if the wiper motor shaft is too short this motor wont work, if the shaft is too long then shim the motor toward the driver with washers on the inside of the windshiel frame. this ia a rig wiper motor and could never thke place of the original. alse this a cheap part and i gave a bad rating. this motor gets real hot and if you let it get too hot it quit working till it cools off'
Question:	Does this item fits a chevy equinox 2005 ls
Answer:	Decide on is universal and can be made to fit just about any vehicle. However putting this on a 2005 would require a lot of drilling. The wiper blade is only about nine inches
Question:	Anyone install this successfully on a Polaris ranger
Answer:	I installed this on my 2017 Honda Pioneer 1K. Worked perfectly. I drilled two holes through the plexiglass windshield for the shaft and the stabilizing bolt. I wired into my electrical system and fused the line. The only thing I worry about is using it without the windshield being really wet. I might scratch the plexiglass. I have not had issues but will watch that. It works well.
Question:	Anyone know how many amps this motor draws
Answer:	I think it was like 3 or 4

Product description

12" Blade, 15" from center of handle to end of blade.

• Mounts to scratch resistant polycarbonate windshields and glass windshields.
• Drilling a ½" dia hole is required.
• Universal wiper kit fits most UTV’s, from center mounting point wiper has a 15" radius, check clearance to insure proper fitment on windshield.

Product description

CLASSIC WIPER BLADE is made to fit AFI wiper arms made with the “hook and catch” style arm as opposed to the current “slide and lock” system. 11 inch Straight Blade.

• Country Of Origin: China
• Package Height Of The Item Is 0.3"
• Package Length Of The Item Is 13.5"
• Package Width Of The Item Is 3.8"

Product description

Marinco Windshield Wiper Blade Black Polymer #69-31018B Length: 18". Poly, glass-impregnated construction. Marine-grade silicone squeegee.

• Package length: 2.8 cm
• Package width: 6.9 cm
• Package height: 53.6 cm
• Product Type: FISHING EQUIPMENT

User questions & answers

Question:	Does this blade work with a straight wiper arm attachment, or curved
Answer:	Straight
Question:	Is this compatible with wiper arm marinco afi 33037a
Answer:	From the Marinco product catalog on their website, it appears that for the Marinco Pantograph Arm #33037A the compatible 18-inch blades are: #34018S (stainless steel) and #34018B (black)
Question:	Does it fit 1965 Plymouth furry
Answer:	No idea I bought it for my boat

• Universal UTV windshield wiper kit will keep a clearer view when the mud gets splashed up or rain while you go out for a race or venture outside.
• Great UTV windshield wiper kit size: 16" Rubber Blade, 18" from the center for the handle to the end of the wiper on most SxS such as RZR Ranger X3.
• Replaces most manufacturers attaching straps.Will not rust or rattle,mounts to Hard Coated Polycarbonate or Glass Windshields.
• With the precision-tensioned steel spring, it can uniform pressure along the entire blade length.
• It can be replaced free of charge within one year, you may need to drill a 1/2 inch hole in your windshield for mounting.

User questions & answers

Question:	Will this fit rzr pro xp oem glass windshield
Answer:	I would say yes with the understanding that my windshield is Plastic so i could drill the hole with a Holesaw. If your windshield is truly Glass, then you'd need to have a way to drill the hole or take it to a glass shop to have them drill your hole. I only needed one wiper to cover the entire windshield - the great part about this unit is, it uses standard wiper blades so you can change out the blade to fit your needs.
Question:	Pic shows a 90 degree sweep. Is there a limiter, or will it move 180 degrees
Answer:	No limiter, will move 180 degrees.
Question:	Can the wiper handle be moved 180 degrees from the pictured location
Answer:	You can install it to operate at whatever angle you want, BUT gravity works in your favor when installed as pictured. Mountains in it "sideways" will make it hard to crank up, easy to crank down.
Question:	What is the size from hand held hole to end of wiper blade
Answer:	Question makes no sense, end of wiper is 18" from hole no matter where the hole is

Product features

KEMIMOTO UTV MANUAL WINDSHIELD WIPER

Fitment

Compatible with Polaris Ranger 570/800/900/1000

Compatible with Polaris RZR 800/900/1000 XP

Compatible with Polari General1000 windshield wiper

Compatible with Can Am Commander

Compatible with Can Am MarverickX3

Compatible with Kawasaki Mule /Teyrx

Compatible with Honda Pioneer

Compatible with Yamaha Rhino

Compatible with Golf Cart

Step 1

First of all, open the cover according to the picture.

Step 2

Secondly, J hook go through the middle hole of the cover.

Step 3

Thirdly, clip the J hook into place and shut down the cover.

Hand Operated Windshield Wiper fits most UTV ! ! !