14 best atb air fresheners

• Operation – Inflate, Deflate & Measure
• 600mm dual swivel PVC coated braided hose, Push on chuck type, Coated thumb trigger
• Accuracy to +/-1psi @ 25-75psi, Multiple measurements: 0-14 Bar, 0-200 PSI, 0-1400 Kpa, 0-14 KgF
• Rubber bump guard to protect against drops and knocks
• Easy to read blue backlight digital display, Large LCD digital readouts with Blue backlight

User questions & answers

Question:	I can use this without a compressor, right? Just for measuring the air pressure? Thanks
Answer:	Yes you can use it to just check pressure and you can use it on a CO2 style tank if you don’t want a compressor
Question:	Compatible with smithybuild
Answer:	No it is not. You risk damaging your Smittybilt pump if you put a female quick fitting on the end of the air hose.
Question:	Will this work with gas station air pumps
Answer:	Typical gas station air hoses for public use have fixed air fittings that can’t be removed. This prevents theft. So no, I don’t think you will find many gas stations wher you could use this.
Question:	Where is it made
Answer:	Box says made in China in teeny tiny letters, almost impossible to find. Quality seems suitable for the price to me, but the previous version of this (non digital) I had fell apart after moderate use. If you find a good USA made product, let me know.

Product features

ARB601 Product Features

•Easy to read Blue backlight display

•Battery Indicator

•Multiple measurements

•Rubber bump guard to protect against drops and knocks

•Coated thumb trigger

•600mm dual swivel PVC coated braided hose

•Push on chuck type

•Accuracy to +/- 1psi @ 25-75psi, Max Supply pressure – 350psi, 2400kpa

•Inflate, Deflate & Measure

ARB601 Product Characteristics:

•Large LCD Digital Readout

•Scale 0-14 Bar, 0-200 Psi, 0-1400 Kpa, 0-14 KgF

•Push on chuck type

•¼ NPT Female (suits ARB fittings)

•ARB fitting included

•600mm Dual Swivel hose

•PVC braided hose

•Batteries – 2 x AAA (supplied)

•Auto Switch off/on

• 1- Motors are water sealed, 100% ball bearing equipped (i.e. no bushings), and feature a unique linear brush pre-load system for extra long life, low heat and quiet operation throughout the life of the unit.
• 2- Compact twin motor, dual cylinder design makes it the highest flowing compressor in its class (voltage vs. size). Highest air flow rate of any 12V compressor of its size on the market at 174LPM [6.16CFM].
• 3- Full wiring loom included for simplified installation and easy plug-in connectivity to Air Locker control solenoids. (Note: Air Locker Manifold Kit #171503 required to mount solenoids).
• 4- Motors are internally thermal protected against extreme temperature damage. Over-pressure safety valve equipped. Equipped with dual heavy duty Maxi-Fuses for professional in-line circuit protection and true circuit redundancy in case of a fault.
• 5- Compressor pistons are equipped with a heavy duty European made cylindrical roller bearing. Hard-anodized cylinder bores and PTFE (Teflon) impregnated carbon fibre piston seals for reduced friction and maximum trouble free life.

User questions & answers

Question:	does this come with solenoid and front & rear switches
Answer:	This fan will only run if plugged in and switched to the "on" position.
Question:	Do you ship to UK, if so what is the approx shipping charge
Answer:	Yes I run it 10 to 12 hours a day..works great
Question:	Does the Air Compressor contains the mounting clamp, backing plate, pressure switch, wire loom and all the mounting hardware? or just the compressor
Answer:	I purchased this to use in my RV. It does it’s job. Blows just enough air around the room. Found the quality to be good as anything else I could have purchased.
Question:	how loud is the unit? Is is too loud to mount in the cab area
Answer:	I tried to disassemble to clean it, it’s a major task, I gave it up, just use cotton swabs dipped with detergent and some patience, I had same question as you, after some research on line, I found out it’s never designed for easy clean cleaning.

Product features

ARB CKMTA12 Air Compressor Features

• Designed for inflating Tires and air locker activation when used in conjunction with optional accessories
• Teflon impregnated carbon fiber piston seals for maximum trouble free life
• Suitable for many air tools when used in conjunction with a 4L air tank (optional with on-board models)
• anodized mounting bracket dissipates heat
• 100% duty cycle
• Over-pressure safety valve equipped
• Hard anodized cylinder bores for reduced friction
• On-board model available in either a 12V or 24V configurationE
• ngineered, built, and individually dyno-tested in Australia from local and imported components.M
• otors are internally thermal protected against extreme temperature damage.

CKMTA12 On Board Air Activation System Includes

• Fully assembled and tested air compressor
• Complete wiring loom w/ Air Locker solenoid plug-in terminals.
• Automotive OEM quality compressor isolating switch.
• 2 x relocatable splash resistant air filters with washable high-flow sintered bronze filter cartridges.
• Mounting bolts and washers.
• Comprehensive photo illustrated installation guide.

On Board System

Ducted IP55 sealed brushless DC cooling fan and anodized motor mounting brackets effectively dissipate heat from the motors, heads and electronics allowing for a 100% duty cycle (under room temperature

Design for Air Lockers or Inflation Kits

Hard-anodized cylinder bores and PTFE (Teflon) impregnated carbon fiber piston seals for reduced friction and maximum trouble free life.

Useful

Motors are water sealed, 100% ball bearing equipped (no bushings used), and feature a unique linear brush pre-load system for extra long life, low heat and quiet operation throughout the life of the unit.

Installation Kit included

Full wiring loom included for simplified installation and easy plug-in connectivity to Air Locker control solenoids. (Note: Air Locker Manifold Kit #171503 required to mount solenoids)

Product description

Clear Air Fresh Linen Odor Eliminator Gel Beads will eliminate and neutralize odors while leaving behind a light and pleasant fragrance that is not overpowering. The Gel Beads will continually neutralize unwanted odors for 60-90 days in up to 450 square feet. Simply remove the top label, open the jar to remove the freshness seal underneath, and screw the lid back on. Place anywhere odors linger.

• Clear Air Odor Eliminator Gel Beads will CONTINUE TO ELIMINATE ODORS FOR 60-90 DAYS in up to 450 square feet. Each Gel Bead container will leave behind a light and pleasant fragrance that is not overpowering.
• Each Odor Eliminator Gel Bead container contains 12 Ounces of product. Our products are all Naturally Derived, Non-Toxic, Non-Allergenic and formulated with our high quality ESSENTIAL OIL BASED FRAGRANCES.
• Every Clear Air Odor Eliminator Gel Bead is Proudly Made in the USA. All of our jars our recyclable.
• The Odor Eliminator Gel Beads are SAFE AROUND PETS AND CHILDREN. Simply remove the top label and open the jar to remove the interior liner and screw the cap back on. For MAXIMUM ODOR ELIMINATION place in a well ventilated area.
• Use Clear Air Gel Beads in your home, office, RV, boat etc. to remove odors from smoke, garbage cans, mold, pet odors, food odors and ANYWHERE RECURRING ODORS ARE A PROBLEM.

User questions & answers

Question:	Do they sell the fragrance to recharge the beads
Answer:	Hello, the picture rightly says 4 units = 4 ct which is correct. The 2 ct is referring to 2 ct. each of Febreze Linen & Sky and Unstopables Fresh Scents = 4 ct.. So you don't get 16 but 4 ct of 2 Freeze Linen and 2 of Sky and Unstoppables fresh scent. I hope this helps.
Question:	No refill jar
Answer:	I do it. Never noticed any problems with it. Pet beds. Curtains. Pillows. etc
Question:	Can you compost the beads? It says it is biodegradable, but what are they made of
Answer:	Is the hole clogged up? You can take like sewing pin or safety pin and poke the hole to unclog it
Question:	I know you take the sticker off the top. Do you remove the paper that is underneath the slits on the lid
Answer:	No, this is only designed to be sprayed into the air. The Febreze Team

Product features

Neutralizes and Eliminates Odor Up to 90 Days!

The Gel Beads will continually neutralize and eliminate unwanted odors for up to 90 days in up to 450 square feet. Simply remove the top label, open the jar to remove the freshness seal, and screw the lid back on. Place in a well ventilated area for maximum odor neutralization and enjoy the scent of each Gel Bead variety.

Proudly Made in the USA!

Each and every jar of Clear Air Odor Eliminator Gel Beads is proudly Made in the USA at our manufacturing plant in Michigan.

Made with 100% Pure Essential Oils!

Every Gel Bead is made with high quality essential oils which add a distinct and unforgettable aroma to any area you place and use the jar. We believe that using superior ingredients produces a better product that does the job every time and anywhere.

Safe Around Children and Pets!

The Odor Eliminator Gel Beads are safe around pets and children. Our products are all Naturally Derived, Non-Toxic, Non-Allergenic and NEVER tested on animals.

Eliminates Odor in up to 450 Square Feet!

The Gel Beads will continually neutralize and eliminate unwanted odors for up to 90 days in up to 450 square feet. Simply remove the top label, open the jar to remove the freshness seal, and screw the lid back on. Place in a well ventilated area for maximum odor neutralization and enjoy the scent of each Gel Bead variety.

Use in the Laundry Room and Bathroom!

The Gel Beads work 24 hours a day and 7 days a week for up to 90 days to make sure your living areas are always smelling fresh. Bathrooms and Laundry areas can be problem areas in the home when it comes to odor. Place one jar of Gel Beads in each area that's a problem and never worry about those lingering and foul odors again!

Product description

Get the perks of laundry day without having to do any laundry. The Renuzit Snuggle Linen Escape air freshener cone is perfectly made to fill your home, especially small spaces like a bathroom or closet, with the inviting scents of clean laundry and fresh floral notes.

• Features the Snuggle scent of fresh laundry with white floral notes
• Gel Air Freshener cone adjusts to the level of fragrance perfect for you
• Great For continuous freshness in small spaces
• Simple to use with no outlets or batteries needed
• Made with 98% biodegradable gel

User questions & answers

Question:	Does this help with litterbox odor
Answer:	Renuzit Snuggle Solid Gel Air freshener, Linen Escape has an enhancing smell, it does not eliminate odor. Our Superfresh Original does contain odor eliminating technology and may be a better option for this need.
Question:	Can I put this in my car
Answer:	Yes, you can. It might be a little bit too strong at first since a car is more enclosed and smaller then in a regular size room. But yes I have put it in my car before.
Question:	Are these made in China
Answer:	They are made in the USA from domestic and foreign (?) ingredients. According to the label.
Question:	Do you receive 12 of these indeed, and whats the total weight for the
Answer:	You can choose the number of product you wish to receive on the landing page. For 12 products, the shipping weight is 6.9 pounds.

Product features

A Scent for Any Space

Renuzit Snuggle gel air freshener provides a lively enhancement to any room in your home.

SuperFresh Fragrance

Renuzit Snuggle SuperFresh fragrance features the Snuggly scent you love plus odor eliminating technology.

Linen Escape Fragrance

Renuzit Snuggle Linen Escape fragrance features the clean fresh fragrance of laundry with white floral notes.

• A new transmitting module has been introduced that utilizes Bluetooth connectivity that allows both monitoring and control of your Series II Fridge Freezer.
• The mobile application is available for free via Google Play or the Apple App Store.
• Inspired by ARB Jack, the gun-metal color body of the fridge highlights the black plastics offering a smart and sleek contrast and improved UV resistance.
• Backlit control panel buttons for ease-of-use in poor light conditions. Customizable dimmable display.
• 12V power input display to assist with monitoring battery condition. This Fridge Freezer does not operate on battery. It must be plug to 110V or 12V. Cables are included!

User questions & answers

Question:	Is it weatherproof? How would it work in the bed of a truck
Answer:	just what you see in this picture, the cooler.
Question:	what is inside dimensions
Answer:	We just got a brand new container in last week! we have over 100 in stock order with confidence that you will get the current model....
Question:	Does the compersor primeraly run on 12 volt dc or 110 ac
Answer:	I can't say why or where you're seeing that, but we have a ton of them in our warehouse, ready to ship right out.
Question:	can this be plugged into a DC 12V/3A port in a mobile power unit
Answer:	The person below does not know anything about engel coolers. They are the the best construction and come with a 3 year warranty. Engle stands behind the cooler.

Product features

What’s New?

• Inspired by ARB Jack, the gun-metal color body of the fridge highlights the black plastics offering a smart and sleek contrast and improved UV resistance.
• Backlit control panel buttons for ease-of-use in poor light conditions.
• Customizable dimmable display.
• A new transmitting module has been introduced that utilizes Bluetooth connectivity that allows both monitoring and control of your Series II Fridge Freezer.
• The mobile application is available for free via Google Play or the Apple App Store.
• If you choose to fully integrate your fridge freezer into your vehicle via LINX, update to the latest version and the module will download for free onto your device.
• App Fridge Control (only available on Classic Series II)

ARB Fridge Slide

ARB FRIDGE SLIDE FOR CLASSIC FRIDGE SERIES II OR SERIES I, Part Numbers:

10900021 (37/50 Qt)

10900022 (37/50 Qt with storage)

10900029 (63/82 Qt)

10900040 (Element 63 Qt)

ARB Insulated Canvas

TRANSIT BAG CLASSIC FRIDGE SERIES II GREY/BLACK, Part Numbers:

10900042 (37Qt)

10900043 (50Qt)

10900044 (63Qt)

10900045 (82Qt)

ARB LINX and Bluetooth Module

ARB LINX INTEGRATION MODULE:

ARB LINX integrate all your 4WD accessories into one device able to control and manage many accessories at your fingertips

ARB 12 Volts Wiring Harness

10900021 ARB 12 Volts Wiring Harness

• The axle breather manifold is machined from billet aluminium and anodized, making it lightweight and resistant to the elements.
• The manifold has 4 axle breather ports allowing for between 1 and 4 breather lines to be connected. It is very compact allowing it to be installed in virtually any location.
• The air filter is the ARB compressor air filter, which is a splash resistant air filter with a washable high flow sintered bronze filter cartridge.
• 8mm Polyethylene tubing is flexible, oil resistant, water resistant and heat resistant.8mm tubing has been selected over the standard 6mm tubing to improve the air flow and reduced the chance of oil blockages in long breather lines. The 8mm push-in fittings make the installation simple and fast.
• The kit comes with self tapping screws, but the manifold mounting holes are large enough to allow mounting using an M6 (1/4 inch) bolt or stud, which is the common size in most vehicle engine bays.

User questions & answers

Question:	Will this fit a 97 lexus LX450? pretty much a Toyota. I am referring to the threaded nozzle nut that screws into the differential
Answer:	Good morning Rizaldy Reantasoyes it will fit any differential Toyota or Dana-Spicer or American Axlethank you
Question:	Does the arb differential breather kit (170112) work with my 2013 jk
Answer:	The kit is pretty universal. You may have to gently heat the ends of the tubing to fit over your existing vent fitting. I have this kit installed in a 2001 XJ Cherokee with a D30 in front and a Ford 8.8 in the rear. I also installed the same kit in my brother-in-law's rubicon with 44's front and rear.
Question:	Is this beneficial in addition to the air locker or does the air locker have built in aspiration
Answer:	Hello Todd Rthis is to help your axles to breath you don't need air locker for this to be installed in your vehicle.if you have any other questions please let us knowthank you
Question:	Does This kit bring both front and back differential breather or i have to buy 2 for the front and back differential
Answer:	In the kit the manifold has 4 axle breather ports allowing for between 1 and 4 breather lines to be connected.

Product features

ARB 171302 Inflation Accessory Kit

• The axle breather manifold is machined from billet aluminium and anodized, making it lightweight and resistant to the elements
• The manifold has 4 axle breather ports allowing for between 1 and 4 breather lines to be connected. It is very compact allowing it to be installed in virtually any location
• The kit comes with self tapping screws, but the manifold mounting holes are large enough to allow mounting using an M6 (1/4") bolt or stud, which is the common size in most vehicle engine bays
• The air filter is the ARB compressor air filter, which is a splash resistant air filter with a washable high flow sintered bronze filter cartridge
• 8mm Polyethylene tubing is flexible, oil resistant, water resistant and heat resistant
• 8mm tubing has been selected over the standard 6mm tubing to improve the air flow and reduced the chance of oil blockages in long breather lines
• The 8mm push-in fittings make the installation simple and fast

Parts Included

• Anodized Aluminium Manifold with 5 Ports and 2 Mounting Holes(
• 4) 1/8" BSP Ports for connecting up to 4 Breather Lines(
• 1) 1/4" NPT Port for the Air Filter(
• 4) 8mm-1/8BSP Push-In Fittings(
• 3) 1/8" BSP Plugs for plugging Unused Ports(
• 2) Self-Tapping Screws(
• 25) Cable Ties8
• m x 8mm Polyethylene Tubing

• Corrosion resistant brass/stainless deflator tool
• Quality bronze bourdon tube gauge design ensures accuracy is not affected by changes in temperature, humidity or altitude
• Fully geared, solid brass precision movement
• Easy to read dial with 1 pressure per square inch increments
• Includes protective canvas pouch and instruction sheet

User questions & answers

Question:	How do you put the valve stem back in? Is it all done with deflator
Answer:	1) Screw the deflator on your stem. 2)Push the top of the brass knob down and twist counter-clockwise (you will feel it catch) until the air flows and the know pushes out. 3) Pull the widest part of the brass away from the valve and let the air flow! 4) Push the widest part of the brass towards the valve to check pressure periodically. 5) Once desired pressure is reached reverse appropriate steps above. FYI. Store this item with the hose as straight as possible. If stored in the provided pouch the hose will become compromised and leak over time. I found a spring to install over the end towards the gauge to assist in this.
Question:	Is it recommended to unscrew the cores out, does this cause premaure wear on the cores
Answer:	Yes this tool removes the valve core everytime you use it. The tool keeps the valve core in the brass tube so it doesn't get lost
Question:	Can i use this as a regular tire pressure gauge when i don't need to air down? or do i have to remove the valve core for it to measure tire pressure
Answer:	You can but you would need to insure you depressed the valve stem or remove it. I would suggest that would not be a practical use and use an inexpensive air gauge. In a real pinch sure you could use it.
Question:	Does this allow you to set a PSI and walk away, or do you have to watch it while it deflates
Answer:	Hello Anthony this is a manual process, you have to actually watch the dial to make sure it reaches the desire PSIthank you

Product features

ARB505 Tire Deflator Tool

Keeping accurate tire pressure is a necessity for good fuel economy, prolonged tire life and maximum traction off road. This distinctive patented design of the ARB E-Z Deflator permits the valve core to be removed to deflate the tire at an amplified speed. An incorporated sliding valve provides a precise reading of the tire pressure while deflation is in process certifying the desired psi is accomplished.

Features

• Corrosion resistant brass/stainless deflator tool
• Quality bronze bourdon tube gauge design ensures accuracy is not affected by changes in temperature, humidity or altitude
• Fully geared, solid brass precision movement
• Easy to read dial with 1 pressure per square inch increments
• Includes protective canvas pouch and instruction sheet

Orange Pouch

ARB505 comes in a High Visibilty Orange Pouch with topographic printing

Small & Light

This product is a perfect companion for all your road trips and adventures with a small size and travel pouch included

Useful

This distinctive patented design of the ARB E-Z Deflator permits the valve core to be removed to deflate the tire at an amplified speed

Easy to Read

PSI reading on big gauge are easy to read with 1 pressure per square inch increments

• Easy-to-read blue backlit display screen, Large LCD digital readout, Updated larger carry pouch included,
• Multiple measurements available, 0-14 bar, 0-200 psi, 0-1400 kpa, 0-14 KgF
• Auto switch off, Auto switch on, Screw-on chuck for positive engagement. Rapid Air Down Deflator
• 250mm braided line, High-quality brass components and crimps, Rubber bump guard to protect against drops, Screw-on chuck suits all Schrader valves
• Accuracy to +/- 1psi at 15-75psi, Air Systems updated pouch

User questions & answers

Question:	We sometimes drop our pressures down to 2psi to deal with snow. Will thos show pressures that low
Answer:	No
Question:	Can i use as inflator? Thanks
Answer:	T works great as an inflator for pool toys or air mattresses. It will fill a 37” tire in about 7 minutes.
Question:	We sometimes drop our pressures down to 2psi to deal with snow. Will these show pressures that low
Answer:	2psi!!! You got beadlocks?

Product features

Features And Benefits

Features and Benefits:

• Easy-to-read blue backlit display screen
• Large LCD digital readout
• Battery indicator
• Updated larger carry pouch included
• Up to 200hrs runtime on set of batteries (2 x AAA)
• Auto switch on/off
• 250mm braided line

Technical Specifications

Technical Specifications

• Multiple measurements available
• Scale - 0-14 bar - 0-200 psi - 0-1400 kpa - 0-14 KgF
• Screw-on chuck suits all Schrader valves
• Rubber bump guard to protect against drops
• High-quality brass components and crimps
• Max supply pressure: 350psi, 2400kpa
• Screw-on chuck for positive engagement
• Accuracy to +/- 1psi at 15-75psi

• Corrosion resistant brass/stainless deflator tool
• Quality bronze bourdon tube gauge design ensures accuracy is not affected by changes in temperature, humidity or altitude
• Fully geared, solid brass precision movement
• Easy to read dial with 1 pressure per square inch increments
• Includes protective canvas pouch and instruction sheet

User questions & answers

Question:	Where is this made
Answer:	That sounds broken. It sounds like it isn't totally locking
Question:	What’s the difference between this arb600 and the arb
Answer:	You screw it onto the valve stem & the tire's air pressure inflates it indicating whether the tire's air pressure is low or not.
Question:	Does this include the Recovery bag shown or just the EZ deflator pouch
Answer:	I honestly don't know. These were bought because my Honda CR-V low tire indicator light came on almost every time I drove out of town. Have literally turned around and gone home due to a false negative reading. Bought these & they seemed to work well until the end blew out of one of them causing an instant flat. Now I use black rubber valve stem covers & carry a battery operated tire gauge in my vehicle. Can pull over (to a very safe location away from traffic) & check my tires whenever the low tire indicator comes on.
Question:	Mine lets air out constantly (in locked position with core removed). The pressure readings are fluctuating. Is it faulty and should I return
Answer:	There is no calibration.

Product features

ARB600 Tire Deflator Tool

Keeping accurate tire pressure is a necessity for good fuel economy, prolonged tire life and maximum traction off road. This distinctive patented design of the ARB E-Z Deflator permits the valve core to be removed to deflate the tire at an amplified speed. An incorporated sliding valve provides a precise reading of the tire pressure while deflation is in process certifying the desired psi is accomplished.

Features

• Corrosion resistant brass/stainless deflator tool
• Quality bronze bourdon tube gauge design ensures accuracy is not affected by changes in temperature, humidity or altitude
• Fully geared, solid brass precision movement
• Easy to read dial with 1 pressure per square inch increments on PSI
• Bar Readings
• Includes protective canvas pouch and instruction sheet

Orange Pouch

ARB600 comes in a High Visibilty Orange Pouch with topographic printing

Small & Light

This product is a perfect companion for all your road trips and adventures with a small size and travel pouch included

Useful

This distinctive patented design of the ARB E-Z Deflator permits the valve core to be removed to deflate the tire at an amplified speed

Easy to Read

PSI reading on big gauge are easy to read with 1 pressure per square inch increments

Product description

The ARB Air Compressor is an integral component of the air locker system. The ARB Compressor Kit is designed to operate single as well as a dual (front and rear) locker system. The ARB Air Compressor Kit contains a pre-assembled compressor, mounting clamp, backing plate, pressure switch, wire loom and all the mounting hardware. Compressor mount inside engine compartment, fits the ARB small and large compressor (not the twin). Direct bolt in using factory hardware. Retains access to brake master cylinder Parts are black powdercoated.

• Boost Projects Custom Kit Includes: ARB Ultimate Wheeler Pack Heavy-Duty 12 VOLT Air Compressor, Pump Up Kit and E-Z Tire Deflator 4x4
• The ARB Air Compressor is an integral component of the air locker system. Automatic pressure activated limit switch Includes compressor, mounting hardware, pressure limit switch, wiring harness and instructions.
• EZ TIRE DEFLATOR: The unique, patented design of the E-Z deflator allows for removal of the valve core for rapid tire deflation, while also providing accurate pressure reading via the simple movement of a sliding valve.
• TIRE PUMP UP KIT: For use with ARB compressor fill up deflated tires on the trail
• Compressor Mount: fits the ARB small and large compressor (not the twin). Direct bolt in using factory hardware.

Product description

ARBs winch pack is designed to fit a complete recovery kit including snatch strap, tree trunk protector, winch extension strap, snatch block, recovery damper, bow shackles and gloves. The winch pack is sold individually and does not come stocked with the straps. All items sold separately so the user can select the correct strap weights for their vehicle.

• Main pocket insert specially coated for mud and water proofing when storing soiled and wet recovery gear. Main pocket is removable for easy cleaning.
• Padded Shoulder strap for comfort and easy carrying., lockable cargo flaps to ensure recovery gear stays in place when the going gets tough. 2 side pockets for bow shackles and gloves
• Reflective tape trim for night time recovery and general safety.
• Heavy duty 100% cotton canvas, rated (30kg) 'sure grip' buckles.
• High twist webbing straps sewn through to base construction for maximum strength

User questions & answers

Question:	re: compact recovery bag picture does not show top or back of bag but does it have any handle or attach points anywhere
Answer:	Ya it comes with a strap to carry it with. It's a nice bag really rugged
Question:	does anyone know if this bag completely full will fit into the decked drawer system
Answer:	Not knowing how big your drawers are I have no clue. I'd look at the stated dimensions and compare with the measurements of your drawer system. A deep drawer perhaps, but mine rides behind my seat.
Question:	What is the bag made from? is it durable? does it have a rubber bottom? they done a poor job of telling the details on it. im still going to order it
Answer:	It is a canvas like material. Very durable. No it does not have a rubber bottom. I use it to carry my survival gear (shackles, etc) and it holds up fine.
Question:	Is the bag plain orange or with the print like in the first picture
Answer:	Mine was plain orange. no print. But that was several years ago.

Product description

Air locker locking differentials allow you to tackle the toughest terrain. The worlds premier traction aid, ARB air lockers keep you moving in all conditions.A complete air locker kit: replacement differential, activation switch, solenoid valve, air line and bulkhead fittings.

• For Use With 30 Spline Axles and with 4.10 And Down Gears
• At the flick of a dash-mounted switch, compressed air is delivered to the seal housing assembly via a nylon air line.
• Requires Air Compressor Sold Separately.
• The ARB Air Locker is a pneumatic locking differential that uses air to facilitate the locking of both axles. This action converts your differential from a conventional open to a full spool type axle supplying 100% power to both wheels to keep you going through the worst terrain. ARB onboard air compressor required to activate Air Lockers. Sold Separately.

User questions & answers

Question:	Is this for toyota pickup 8.5in
Answer:	No it's for GM 10.5" full float 14 bolt. We have the entire ARB product line in stock. Just let us know what year/make model you're working on.
Question:	Does the rd114 include carrier bearing and races
Answer:	No
Question:	I have a 2005 gm 14bolt with 30 spline axles, is the rd114 the correct locker if using 5.38 thick r&p gear
Answer:	Yes this is the proper air locker to use with 5.38 thick gears!

Product description

The ARB Air Compressor is an integral component of the air locker system. The ARB Compressor Kit is designed to operate single as well as a dual (front and rear) locker system. The ARB Air Compressor Kit contains a pre-assembled compressor, mounting clamp, backing plate, pressure switch, wire loom and all the mounting hardware.

• Boost Projects Custom Kit Includes: ARB Ultimate Wheeler Pack Heavy-Duty 12 VOLT Air Compressor, Pump Up Kit and E-Z Tire Deflator 4x4
• The ARB Air Compressor is an integral component of the air locker system. Automatic pressure activated limit switch Includes compressor, mounting hardware, pressure limit switch, wiring harness and instructions.
• EZ TIRE DEFLATOR: The unique, patented design of the E-Z deflator allows for removal of the valve core for rapid tire deflation, while also providing accurate pressure reading via the simple movement of a sliding valve.
• TIRE PUMP UP KIT: For use with ARB compressor fill up deflated tires on the trail

User questions & answers

Question:	Where is it made
Answer:	If its legitimate ARB, then its either manufactured in Australia or Thailand, but these are maintained through ARB QA/QC and have a strong presence there. There is a lot of China counterfeit products that say "ARB" but they are inferior in every way. Best way to make sure is to see if the vendor selling them on here are officially licensed by ARB as a reseller. Ive owned this compressor and its a great unit. Used it with a 2-1/2 gallon tank to air up tires on trails
Question:	Will this fit in a 2018 jlu? Also what bracket do I need
Answer:	It comes with a mounting bracket. You have to find a space where it fits. Not hard to do. I mounted mine in the rear compartment of my Expedition to keep it out of the dust.
Question:	Does this come with wiring to run a switch in vehicle
Answer:	Yes including the switch the only thing you’ll need is a mounting point it come with a mounting bracket but it’s not specific to any vehicle
Question:	Does the compressor come with a rocker switch, or any switch for in cab mounting for operation
Answer:	Yes comes with switch all you need is a panel or cutout for the switch

Product description

A relentless commitment to research and design, the use of quality materials, and an uncompromising approach to manufacturing have all contributed to the Air Locker’s success in over 100 countries worldwide. Designed and manufactured in Australia, ARB Air Lockers will enhance the traction of your 4×4 in just about any terrain, whether it’s rock, clay, gravel, sand, snow or mud. Now with a state-of-the-art two-piece design available right across the range, forged gears for the ultimate in strength and durability, and an industry-leading five-year warranty, ARB Air Lockers are better built and better backed than ever before.

• Compatible with: Front Jeep Wrangler JK 2 Door & 4 Door non Rubicon, and Jeep Wrangler JL Non Rubicon
• For use with 27 spline axles, use with 3.73 and up gears
• At the flick of a dash-mounted switch, compressed air is delivered to the seal housing assembly via a nylon air line.
• Requires Air Compressor Sold Separately
• The ARB Air Locker is a pneumatic locking differential that uses air to facilitate the locking of both axles. This action converts your differential from a conventional open to a full spool type axle supplying 100% power to both wheels to keep you going through the worst terrain. ARB onboard air compressor required to activate Air Lockers. Sold Separately.

User questions & answers

Question:	i have a stock Jk wrangler 2012 i see the one for the danna 30 front but what about the 44 in the rear
Answer:	RD117 is the rear for a JK
Question:	does the free air compressor apply to this product as on other websites
Answer:	Yes, this unit will come with a FREE COMPRESSOR as long as it is purchased on or before May 31, 2017.Let me know if you have any other questions.Thanks,[email protected]
Question:	Is' fit for grand chroocki 2008 limitet 4.7 with dana 35 tracshion
Answer:	No this will not fit your 2008 Jeep Grand Cherokee. 2008 Jeep Grand Cherokee used a Chrysler 8.25" 29 spline rear. It would use ARBRD93 as long as it does not have quadradrive.
Question:	Hi, Does the locker comes with the switch, solenoid, air fittings, and plastic blue air hose
Answer:	About the Product:Air locker locking differentials allow you to tackle the toughest terrain. The world's premier traction aid, ARB air lockers keep you moving in all conditions.A complete air locker kit: replacement differential, activation switch, solenoid valve, air line and bulkhead fittings.Please note: Not all units are supplied with replacement carrier bearings.