14 best gas springs

• Lids soft open gently,Ideal for supporting the lid to keep it open.NOT SOFT CLOSE!
• Pressure:100N/22.5lb (Per Strut);Length ( hole center to hole center) :9-11/16'';Travel:3-14/25'' ,Distance between ball mounts compressed: 6-1/8"
• Support opens lids to a maximum angle of 100 degrees.Available working temperature :-10℃~50℃/14℉-122℉
• Package included: 4 X 100N 10 Inch Gas Strut and 20 X Screws
• We offer 1 YEAR 100% SATISFACTORY WARRANTY, if unfortunately our SOFT OPEN LID GAS STRUT did not work well ,please kindly contact us for exchange, refund or return

User questions & answers

Question:	Will two of these support a 36”x57” door lifted vertically? Door is made of 1x3 trim froame wrapped around 3/4 T&G 6” wide cedar
Answer:	I have an outdoor tv cabinet door that is about the same dimensions that you mentioned. I’m looking for lift supports. What did you find that worked? Thanks
Question:	Do the mounting brackets swivel for different mounting options on the shock itself
Answer:	The mounting bracket does not swivel. It is a ball socket that gets mounted by two screws. The mounting holes or elongated for minor adjustments. The ball socket also allows for a couple degrees of movement so you can mount a little off centered if you have to.
Question:	How do I remove the balls from the strut so I can attach them to the frame they're being attached to? Mine did not come with instructions
Answer:	There is a clip on the backside of the strut. Once removed, the ball will slip over the connecting part on the mount. Once the shock and bracket are connected and finished, you have to put that clip back into its spot so it’s locked.
Question:	Can they be used for a metal lid weighing around 10lbs? I plan on using two shocks per lid. I'm also curious to how soft they close or if they slam
Answer:	Depends on where you are mounting the ends. It was a slam shut following the instructions given along with the product. Had to manually calculate the locations to place the end and now it soft closes till the very end.

Product features

Suitable Gas Strut for the Kitchen Cabinets

Do you want to make your sideboard lifted top up and it stays in place until you pull it down ?

Are you looking for the suitable gas strut for your Kitchen Cabinets ?

Look at this, It is so nice for you to be able to use both hands inside the cabinets without balancing the cabinet door on you head

Suitable Gas Strut for RV Overhead Cabinet Doors

Do you have to hold the doors open with your head or have to have my husband/wife hold the door open while you get stuff out ?

Are you looking for the suitable gas strut for your RV overhead cabinet doors ?

Here's it, because once you open the doors with these struts on, they stay open until you physically close them

Great product

Excellent strut! Exactly what I needed to support an overhead cabinet door. The door was about 28" wide and 14" high over a microwave. One strut held it up but I used 2 for balance. Good instructions easy install. Made my day!!

Worked great for my application and the quality seems like they

Arrived quick with prime and on sunday to boot. Worked great for my application and the quality seems like they will hold up over time. Will be buying more soon

Great value, works as promised

Great value, works as promised. I used these to hold the lid of a coffee table/chest. Installation is a breeze and the directions were easy to follow, take note that measurements are metric so you can convert them with a smartphone or use a metric ruler.

Great product for the money

Did the job nicely. I wanted a self-opening and stay-open lid on the nest box on my chicken coop so my 3 year old could open it and not worry about it slamming down on her head or fingers as she reached in. Success! The lid on my nest box is 14" x 30", framed in 2x2 lumber, with sheathing, tar paper, drip edge, and shingles on it, so it's relatively heavy. Just one strut was able to hold it open, but self-opening was non-existent and it still slammed shut quite hard

HOW TO INSTALL APEXSTONE 100N/22.5LB GAS STRUTS?

1.Determine the center position of the rectangle mounting hardware ,it should be 70 mm/2 3/4 inch from the back of the lid (do this bracket last so you can line up the closer with the side of the cabinet),as distance to the side of the lid, it depends on the thickness of your box/kitchen cabinets,then mark A ,drill 2 holes on the sides of the center point A

2.Determine the center position of the round mounting hardware, it should be 240 mm/9 7/16 inch from the back of the cabinet, and 10 mm/2/5 inch from the top of the cabinet ,then mark B ,drill 3 holes around the center point B

3.Fix the connectors and connect the joints and the strut

Product description

Product information

1. Lids will lower slowly and gently to avoid crushing the smallest of fingers. Our lid stays hold the lid open until you close it. Never have to worry about propping your lid open again. Our easy to follow instructions will ensure you get the install right the first time. With our 100% satisfaction guarantee you have nothing to worry about.

2. Each hinge can be used for right or left hand mounting. This safety hinge assist is adequate to slow the fall of a 30 pounds lid, Two can hold a lid that weighs 60 pounds. Gas Struts Heavy Duty hinges will not applicable with the lid at width more than 50” and height over 25”. And must with a 9 inch clearance. Hinges will not work if your lid doesn’t match specified dimension and weight requirement.

Important reminder

    We now offer instructions with both English and Metric measurements. These new instructions will be emailed after the purchase of the product. If for some reason you do not receive these feel free to reach out and we will email them to you.

    Please follow the placement dimensions as described in the installation instructions. The installation directions depend on your chamber or cabinet opening direction. Please read the installation instructions carefully before installing.

• Gentle slow close design - Lids will lower slowly and gently to avoid crushing even the smallest of fingers.
• 200N heavy duty gas struts - A 200N heavy-duty gas struts may be supported maximum 30lbs lid and gently lowered; 2 heavy gas struts may support maximum 60 pounds of the lid.
• Lid stay 105 degree open with soft close - The lid stay allows the lid to open at a maximum 105 degree angle.
• Easy install instruction - Easy to follow installation instructions ensure a perfect install the first time! Lid stay can be installed on either the left or the right side.
• No risk purchase - We provide worry-free lifetime warranty(no man-made)and friendly customer service.

User questions & answers

Question:	First 250n hinge installed held lid open and soft closes. second hinge holds the lid open and it can't be closed. lid stays wide open. is this right
Answer:	I had a very heavy lid for a window seat. My experience is the same. First hinge held it up and second hinge made it so it had to be manually closed. These were the fourth type of hinges I tried and the only ones that worked.
Question:	What is the difference between the 200N and 250N
Answer:	The size of the support weight is different. The 200N hinge is the lid that can support the 200N weight, and the 250N hinge is the lid that can support the 250N weight.
Question:	I've got a 3/4 walnut top that's 48" x 48". It's right around 40lbs. Will these work for a top of that size
Answer:	No it won't. I have exactly a 40 lb. lid and two 200N would not soft close it. It leaves a pretty hard slam.
Question:	Can I use a piano hinge , or do I need self close hinges also
Answer:	Yes, Both are

• Lids soft open gently,Ideal for supporting the lid to keep it open.NOT SOFT CLOSE!
• Force:18 Lbs(Per Strut),Length (Center-to-Center):7 inch(180 mm),Compressed Length (Center-to-Center):5.12 inch(130mm)
• Support opens lids to a maximum angle of 90 degrees.Available working temperature :-10℃~50℃/14℉-122℉
• Package included: 2 X 80N 7 Inch Gas Strut and 10 X Screws
• We offer 1 YEAR 100% SATISFACTORY WARRANTY, if unfortunately our SOFT OPEN LID GAS STRUT did not work well ,please kindly contact us for exchange, refund or return

User questions & answers

Question:	Can this be modified to use on pull down cabinets rather pull up? than
Answer:	I guess they could be used for pull down cabinets, but I can't think of why I'd want to do that. It seems that gravity would keep the doors down. The gas struts are used to counteract gravity, which would act to lower the item you're trying to keep up. Now if your pull down doors are spring-loaded to close, then I guess the struts would be helpful.
Question:	What is the diameter of the round mounting bracket? I have only a 3/4" board to mount it on and it looks much larger than that in the picture
Answer:	The round mounting bracket is 1and 3/32 in diameter. The oblong bracket is 1/2 x 1 and 1/2"
Question:	I have been unable to extend or collapse these, had other people look at them and they can't figure it out either, what am I missing
Answer:	Force. It takes a lot of force if you push them by hand it is very difficult. When placed into an application you often have a 5+ times multiplier of force and it seems easy to compress.
Question:	what are the dimensions of this item
Answer:	When I ordered these, I really had no idea of the dimensions. The 7" is the center to center distance of the mounting holes (at right angles to the long dimension). The LOA (to outside of mounts) is 8". The useful travel is roughly 2 1/4". Body about 5/8" in diameter. End mounts are threaded on and could be replaced. Looks like a M6-1.0, but a 1/4-28 nut also seems to work.

Product features

Suitable Gas Strut for the Kitchen Cabinets

Do you want to make your sideboard lifted top up and it stays in place until you pull it down ?

Are you looking for the suitable gas strut for your Kitchen Cabinets ?

Look at this, It is so nice for you to be able to use both hands inside the cabinets without balancing the cabinet door on you head

Suitable Gas Strut for RV Overhead Cabinet Doors

Do you have to hold the doors open with your head or have to have my husband/wife hold the door open while you get stuff out ?

Are you looking for the suitable gas strut for your RV overhead cabinet doors ?

Here's it, because once you open the doors with these struts on, they stay open until you physically close them

Suitable Gas Strut for Display Table

Do you find something are good for any job needed to open and hold open a lid ?

Look at this one, It do keep the display table door or lid open enough to avoid banging your head on the edge of the door

HOW TO INSTALL APEXSTONE 80N/18LB GAS STRUTS?

1.Determine the center position of the rectangle mounting hardware ,it should be 60 mm/2 3/8 inch from the back of the lid (do this bracket last so you can line up the closer with the side of the cabinet),as distance to the side of the lid, it depends on the thickness of your box/kitchen cabinets,then mark A ,drill 2 holes on the sides of the center point A

2.Determine the center position of the round mounting hardware, it should be 170 mm/6 11/16 inch from the back of the cabinet, and 10 mm/2/5 inch from the top of the cabinet ,then mark B ,drill 3 holes around the center point B

3.Fix the connectors and connect the joints and the strut

Product description

Package include: 2 X 200N/45lb 10 inch gas strut

• Force:200N/45lb (Per Strut);Length ( hole center to hole center) :9-11/16'';Travel:3-14/25'' ,Distance between ball mounts compressed: 6-1/8",Set of Two in the Package.NOT SOFT CLOSE GAS STRUT!!!
• 10 inches 45 lb Gas Shocks Perfectly suitable for truck toolbox lid, RV door, cabinet lid, bed with storage,and other DIY projects
• Lids soft open gently,Ideal for supporting the lid to keep it open,Support opens lids to a maximum angle of 90 degrees,it fit for the door/lid which the WIDTH is Less than 20 inch , the WEIGHT is between 45 and 90 lb
• Package included: 2 X 200N 10 Inch Gas Strut and 10 X Screws
• We offer 1 YEAR 100% SATISFACTORY WARRANTY, if unfortunately DOA or our 45 LBS GAS STRUT did not work well ,please kindly contact us for exchange, refund or return Bullet Point

User questions & answers

Question:	Are this for a toyota Matrix
Answer:	No
Question:	Will these work on 2006 BMW 325i trunk lid
Answer:	check number on original tubes then on replacements.
Question:	I need hood struts for 92 Chevy Camaro
Answer:	Should work check dimensions
Question:	Can you take that silver part off
Answer:	Which silver part? The connection brackets are held in a sort of a ball joint by a spring clip that can by pried up with a screwdriver to release. It's about the only way you can drive every screw through the bracket.

Product description

Package included : 2 X 300 N/67 LBS 15 inch gas strut

• CAUTIONS:NO INSTRUCTIONS! NO SCREWS! NOT SUITABLE FOR TOY CHEST! IF YOU ARE NOT SURE THE ITEM IS OKAY FOR YOUR PROJECT , PLEASE CONTACT US BEFORE PLACING ORDER
• FORCE:67 Lbs/300 N(Per Strut),LENGTH(Center-to-Center):14.96 inch(380 mm),COMPRESSED LENGTH(Center-to-Center):9.06 inch(230 mm).Bracket Holes' Size: 8 mm(diameter),8 mm(diameter),10 mm X 8 mm(Length X Width).WORKING TEMPERATURE: -10 ℃ - 40 ℃/14℉-104℉
• SET OF 2 IN THE PACKAGE:It could hold open 65 lb individually or together for around 130lb on any object such as car lid ,trailer,bed,RV under-bed storage, trap door etc.
• INSTRUCTIONS & SCREWS NOT INCLUDED,While you can feel free to Click "Ask Seller" Besides Your Order for In-time Assistance
• 100% SATISFACTORY WARRANTY: We offer 1 year 100% satisfactory warranty,if unfortunately our gas strut did not work well ,please kindly contact us for exchange, refund or return

User questions & answers

Question:	Is it 15” contracted or expanded
Answer:	contracted. It is a 65lb pull. Not for a cabinet or something light weight. I can not extend it or contract it by hand.
Question:	If i were to put these on a cabinet door under pressure and locked the door, when the door was unlocked would it open the door with out help
Answer:	It would depend on 2 factors: 1) positioning of the struts, and 2) weight of cabinet doors I used mine to replace hinges on a 1976 camper hatch. Heavy hatch door, back in the day when they built solid items. I still have to initiate opening the hatch, but when I get to a certain point, less than halfway, the struts take over and hatch raises on its own and stays open.
Question:	Would these fit on an MR
Answer:	Whoa! NO. These are rated to lift 67 Pounds EACH. There is no lid/hatch on Mister 2 with lifting weight half of that. To find which strut-pair lift rating is suitable for your application you must first determine the lifting weight of each hinged cover, then divide that by 2. Cheers!
Question:	Will these hold lid open 90 degrees from a cabinet that is perpendicular to th floor
Answer:	They'll hold the lid at any angle you want them to. It all depends on where you mount them on the lid and on the cabinet.

Product description

***Fasonla - Gas Spring***

Need to prop open a door, cabinet, barrier or even a car?

Your Fasonla Gas Springs…

✔Construction Grade… Your gas struts are construction grade and do all the heady lifting so you can focus on the real work.

✔65-120lb / 90-130 Degrees… each 15” strut provides 65lb of force, combined for 120lb+ lifting force that can achieve 90-130 degrees of movement.

✔Easy Fit & Removal… 2 L-Plates fitted to each end of your gas springs can easily be fitted and removed to any surface with the screws provided.

Best Uses…

Cars

Cabinets

Barrier Doors

Doors

Trap Doors

Basement Doors

All other Medium to Heavy Objects

So What’re You Waiting For?

Let your new gas springs do the heavy lifting for you while you can crack on with the job at hand, unhindered and well executed, click “Add To Cart” Now!

CAUTION: Not for use on objects weighing less than 65lb, this could cause damage to said object as of the power each spring outputs (300N)

• ✔️ POWERFUL STRUT: Your Gas Springs are powerful, prop open any medium to heavy object such as a car lid or barrier for hands free convenience, with easy fittings to any surface just attach, lift and your gas spring lifts and holds open any medium to heavy object. CAUTION anything under 65lb of weight should not be fitted with your gas springs, these powerful springs is difficult to be compressed by hand.Not Suitable for toy-chest or Windows.
• ✔️ SET OF 2 - 65 to 120 LBs TOTAL WEIGHT: Your gas springs come in a set of 2, able to hold open 65lb of weight each use individually on medium weighted objects or together for a combined hold strength of 120lb or more.
• ✔️ 15” TOTAL LENGTH: Each of your gas springs when fully extended is 15” in length and when fully compressed is 9” in length giving you the option to have 90-130 degrees of opening depending on the position of your gas springs.
• ✔️ EASY FIT & REMOVAL: Your gas springs come with 2 L-plates each at top and bottom with 4 screw holes and screws included, simply screw into any soft surface or pre drill a guide hole in any tough surfaces like wood, metals. The High quality materials included mean your screws can easily be fit and removed for any adjustments.
• ✔️ BRAND GUARANTEE: If you are looking for top quality Gas strut, this set of 2 Gas Struts is just what you need. If unhappy with the purchase, please let us know for a free replacement or full refund, no questions asked. Click ‘Add to Cart’ now!

User questions & answers

Question:	I have a 90 lb trap door in a floor. Will two of these keep it from slamming shut and lock in place at over 90 degrees
Answer:	I cannot give you a precise answer, since I have used them for a different application. However, the two struts allow me to raise a heavy plunge router mounted to a heavy table top (24" X 36") using fingertip pressure and remain open at an angle greater than ninety degrees. The size and weight of your trap door may give you different results, of course.
Question:	This is my first strut, it doesnt move at all...is there something im missing
Answer:	Firstly, I’m very SORRY for your difficult experience while using our product. These powerful springs is difficult to be compressed by hand. Please check again.can you check it with force 300N again? If you unhappy with the purchase, please let us know for a FREE REPLACEMENT or FULL REFUND
Question:	What is the nut and thread size for the nut that screws on each and of the strut to secure it in the provided brackets
Answer:	Mine are not 5/16, but rather the closest metric size
Question:	will these hold open and stay from 40 to 60 degrees, or any angle between 0 and their fully extended length
Answer:	I am not sure... I do know the struts will try to extend to their maximum lift so I would think they wouldn't stay put at a given position. They are not that expensive so worth a try. I used them for our high school robotics team to assist in lifting an arm.

Product description

Gas Charged Lift Supports are energy storage devices which create force by compressing gas inside a cylinder. Unless shown as a universal, each Lift support listed in this Amazon item is specifically manufactured to OEM specifications for the listed application. Each support is tested to perform as well as the original units and in many cases to exceed the manufacturers specification. Lift Supports lose pressure over time, even sitting on shelves in most auto parts stores and many of the inventory liquidators on the web. *Please Note* If your existing part number does not exactly match this part number internal components could be different.

• Compressed Length (Center-to-Center): 11.8 in (300mm)
• Extended Length (Center-to-Center): 19.7 in (500mm)
• Force: 120 Lbs (534 N) (Per Prop)
• End Fittings: 10mm Nylon Ball Sockets
• Set of Two

User questions & answers

Question:	I need L type connections for these ...Suspa C16-08055 not sure what to get that fits
Answer:	I'm not sure what you mean by L type connections. This unit installs on a ball mounted on an L bracket and snaps onto the ball from the side of the Suspa Gas Spring.
Question:	Does anyone know the lenght of these springs? i want to see if they would work for my 2006 f-150 lariat tonneau cover.. thanks
Answer:	Not sure. I would Prop up your cover and pop off one of the original springs and read the label for the model # then either google it or search it on amazon and ebay to get the specs
Question:	Are these soft close
Answer:	I would say they are. They are strong enough that you pull them down to close at your speed. So far they appear to be safe and have been easy to use. The original ones on my truck were 110 pounds. These are 120 and seem to work better on my ARE cap.
Question:	Hello, I'm building a full size bed with storage, these lift supports can work for this purpose? or I need something with less force? thanks
Answer:	I use 2 120 lb shocks to lift a 60 in. X 48 in 3/4 in plywood base for a select comfort Queen bed measure 25 in between ball studs

Product description

Made in the USA

Gas Prop for Truck Caps and Campers

Set of Two Makes Replacements More Economical

These Suspa Gas Props are high quality, US-made, and provide years of dependable use.

Replacement of both units at the same time is recommended.

Set of Two

User questions & answers

Question:	Looking for a Spring closed 9 1/2" long open & 15" open
Answer:	Greetings: We would need all of the numbers that are on your old support to determine the pressure.
Question:	I have gas supports P/N 3N300-52871 what will work for me
Answer:	just type in model you need and search gas door supports or camper supports. likely many will fit your needs
Question:	I have a 1996 ford ranger p/u, the length of the old struts is 17-1/2" hole to hole, the extended length is 19". Will these work on my truck
Answer:	Greetings: Many supports even though they are the same length have different pressures. On you old supports there should be some part numbers. Send us those and we can point you to the correct listing.
Question:	I built a chest and need these for the top. how do i know these are not overkill. the chest top is 66' wide by 22' deep and made out of mahogany
Answer:	re:66"x22" its a little overkill. This application could use a little lighter gas spring, depending on the weight. I use them on a heavy canopy door and they work very well.

• Red Hound Auto Gas Charged Lift Supports Pair
• Open Length: 20 inches; compressed 12 inches
• Stroke Length: 8 inches
• Rod Diameter: 6 mm || Force: per 60 pound，set 120 pound
• Compatible with 10mm Ball Mounts; Note: verify strength needed for your application; DO NOT attempt to compress by hand, doing so can damage the struts

User questions & answers

Question:	Is there any mounting hardware included
Answer:	No hardware included
Question:	Will these work for the storage compartment doors on my american dream rv? the existing strut has part number sl
Answer:	I installed these on the battery compartment door and they were better then the factory installed ones. They are working just fine.
Question:	Does it fits for camry
Answer:	I really do not know. These were used on our motor home Under storage as the ones on it had lost its service.

• 🟢[APPLICATION] Most used for Heavy-Duty equipment such as bed with a small compartment, outdoor TV Cabinet, marine projects, heavy toolbox lid, camper shell, truck canopy, trap door, trailer door, trash bin, and other custom Medium or Heavy equipment.stom Medium or Heavy equipment.
• 🟢[SUPPER STRONG] 67lb/300N per strut, two are 134lb/600N. Super Strong and stiff, you couldn't compress them by your hand!! Suitable for lids or doors weighing between 50 pounds and 100 pounds! Side lengths Over 35 INCHES!
• 🟢[PARAMETER] Extended Length: 14.96in (380mm), Compressed Length: 9.06in (230mm), Force: 300 N/67Lbs Per Strut. No screws included. The ball Connector is removable and rotatable.
• 🟢[TIPS]If you feel it is too powerful to close and you have a lot of flexibility in where they can mount, you can move the mount point on the lid towards the hinges' direction.
• 🟢[12+1 MONTH REPLACEMENT] Welcome to Click "Ask Seller" BESIDE YOUR ORDER for In-time Assistance if any problem occurs.

User questions & answers

Question:	Can these shocks be used for an attic door
Answer:	I installed them on a tool box lid and they worked fine
Question:	Can I installed these struts under a queen bed in my trailer
Answer:	Dear customer, No1: You can contact us via this link: https://amzn.to/2QAoAb0. Then write a message and send us. No 2. Send an email to this mailbox. [email protected] Any questions, you are free to contact us at any time. Vepagoo Auto.
Question:	are these struts easy to install
Answer:	I used standard twist-on electrical wire connectors you can get at any hardware store. If you want to know the specific code you'll need to look into what the code is for your community since codes do vary some. I was also able to remove just one of the knockouts to insert the wires but it was a tight fit.
Question:	Could anyone share some installation experience
Answer:	Both, but I used it for existing construction through drywall ceiling attaching to bottom cord of the trusses. Hardest part was removing old box without tearing up the drywall. Hope this helps!

Product features

Struts used on TV Cabinets

Struts used on Floor Hatch Door

Struts used on Shed Window

Struts used on TV Cabinet

Struts used on toolbox

Struts used on Storage Box

Product description

Red Hound Auto 20 inch 10 lbs (each) Gas Charged Lift Supports Pair. Reference numbers: LGP6-200-10, 612293, 612297, 612299, 612313, 612317, 612231. Red Hound Auto high quality gas props and lift supports have been designed to meet or exceed OE specifications. Easy do-it-yourself installation. Note: Replacing a single gas prop is not recommended for doors, hoods, etc. that have more than one prop. Replacing gas props or lift supports in pairs is always a good idea in order to keep the load balanced, maintain even resistance and avoid uneven wear. Undue stress on a single prop over the other results in diminished life for both props.

• Red Hound Auto Gas Charged Lift Supports Set of 2
• Extended Length: 20 inches; compressed length: 12 inches
• Stroke Length: 8 inches
• Rod Diameter: 6mm || Force: 10 lbs each strut
• Compatible with 10mm Ball Mounts; Note: verify strength needed for your application; DO NOT attempt to compress by hand, doing so can damage the struts

User questions & answers

Question:	what is the ball socket size for these
Answer:	10mm ball mount compatible. Thank you!
Question:	Do these come with mounting instructions (measurements)? I’m planning to use these for overhead opening for flat sceen tv cover
Answer:	Im not sure but for an overhead tv, you might need something stronger than 10 lbs.
Question:	what is the force fully extended and what is the force fully compressed? I asked this question a week or two ago and haven't seen a reply
Answer:	I would say 40bls lift force fully open. The compressed force is only for the ready position and the 40lbs is for the action part of the shock. Good luck.
Question:	Does it come with 4 10mm ball studs (was her and nuts
Answer:	I do not remember it coming with any ball studs. I replaced a damaged one on an RV which already had the ball studs.

Product description

This spring is often used on the rear lift doors of truck caps. It is recommended that you replace both units at the same time.

• Extended Length: 13.98" (center to center of ball socket ends)
• Compressed Length: 8.9"
• Force: 24 pounds of pressure
• End Fittings: 10mm nylon ball sockets
• 5 YEAR WARRANTY from the manufactured date.

User questions & answers

Question:	How many are in packaging
Answer:	There are 2 gas springs per package.
Question:	Does it fit 2006 acura mdx hood lift
Answer:	No, the correct parts are in the link below. http://www.amazon.com/dp/B009PF8EYK?ref=myi_title_dp
Question:	Is this for all standard truck caps by LEER
Answer:	It fits my Leer, but it isn't strong enough to hold the glass up.
Question:	Does this item come with instructions how to remove the old ones and install the new ones
Answer:	Mine did not although they are very simple to install on each end they have a metal spring clip a small screw driver or similar tool will help you pry that clip open and then you can remove the gas spring from the ball studs. to install they just push on the ball studs

• 🍀15 inch Struts 67 lb Gas Props 🍀 -- Extended Length: 14.96", Compressed Length: 9.06", Force 67 Pounds Per Strut, Most suitable SUPPORT weight for ONE pair is 55-75 Pounds!
• 🍀15 inch 67 Pound Gas Struts🍀 -- Most suitable SUPPORT weight for ONE pair is between 55-75 pounds, very strong please measure your lid before purchasing; if out of this range, please choose other ARANA shocks with suitable pressure!Note: DO NOT compress them by hands before installing, the struts could only be compressed after installing successfully!!!
• 🍀15inch 67lbs Gas Spring Shocks🍀 -- 2 × Struts & 4 ×10mm Mounting brackets are included in per set, you needn't buy additional mounting brackets; Suitable for Heavy-duty door/lid/cover, if your lid is less than 55 pounds, Please DO NOT BUY THIS PRODUCT!
• 🍀15 inch 300 N Automotive Replacement Struts🍀 -- ARANA 15" Gas Shocks are usually used on trap door, cellar door, floor hatch door, boat deck, teardrop trailer, rv bed, camper bed, murphy bed, heavy RV compartment door, heavy crawl space door, roof access hatch, TV cabinet, queen bed, wood surface with weight not less than 55 pounds! Note: this product is very strong, DON'T BUY for LIGHT-DUTY LID!
• 🍀18 Months Support🍀 -- We will provide brand new item if any issues in 18 months; just click ASK SELLER besides your order from us we will solve your problem without returning the last package!

Product features

Using Scenes of ARANA 15inch 67lb Gas Struts:

Use on the TV Cabinet

Use on the Toolbox Lid

Use on the Floor Hatch

Use on Camper Shell

Use on RV Bed

Use on DIY Builds

• YHTAUTO Affordable and Prime Lift Supports, Directly Fit
• Replacement for Cadillac Escalade 2007-2014; Chevy Suburban 1500/2500, Tahoe 2007-2014; GMC Yukon, Yukon XL 1500/2500 2007-2014---Sport Utility
• Location: Rear Window Glass, Left and Right
• Extended Length: 19.69", Compressed Length: 11.54"
• Reference Number: 6157, SG330073

Product features

Item Specification

Item Type: Lift Support Struts

Install Location: Rear Window, Rear Left and Right

Extended Length: 19.76 Inches

Compressed Length: 11.57 Inches

Stroke Length: 8.19 Inches

Shaft Diameter: 6 mm

Body Diameter: 15 mm

Reference Part Number: SG330072,SG330073,95812,15161943,15161944,6157

Vehicle Information

• Escalade 2007-2014 Sport Utility Does not fit pick up truck

Replacement for Chevrolet:

• Suburban 1500/2500 2007-2014 Sport Utility
• Tahoe 2007-2014 Sport Utility

Replacement for GMC:

• Yukon 2007-2014 Sport Utility
• Yukon XL 2010 Sport Utility
• Yukon XL 1500 2007-2014 Sport Utility
• Yukon XL 2500 2007-2014 Sport Utility

General Installation Instruction on How to Replace the Lift Support!