11 best hyundai charge controllers
Hyundai charge controllers, as you've mentioned, are related to automotive systems, specifically in the context of air suspension kits and shocks struts suspension. These controllers play a crucial role in managing and controlling the air suspension system in Hyundai vehicles. Here is what you need to know about Hyundai charge controllers:
Air Suspension Systems: Many Hyundai vehicles come equipped with air suspension systems, which provide a smoother ride and allow for adjustable ride heights. These systems use air springs and shocks to maintain the vehicle's comfort and handling characteristics.
Charge Controller Function: The charge controller in an air suspension system is responsible for regulating and controlling the air pressure in the air springs. It plays a vital role in maintaining the vehicle's ride height, stability, and overall suspension performance.
Pressure Monitoring: Hyundai charge controllers typically monitor the air pressure in the air springs and adjust it as needed to keep the vehicle at the desired ride height. This helps optimize ride comfort and handling.
Load Leveling: In addition to maintaining ride height, some Hyundai charge controllers also assist in load leveling. They can adjust the suspension to compensate for changes in vehicle load, ensuring a consistent and comfortable ride.
Fault Detection: Modern Hyundai charge controllers may also have built-in diagnostic capabilities to detect and report any issues with the air suspension system. This can be useful for identifying and addressing potential problems early.
Replacement Parts: If a Hyundai vehicle's air suspension system requires maintenance or repair, including the charge controller, it's essential to use genuine Hyundai replacement parts or high-quality aftermarket components designed for compatibility with Hyundai models.
Professional Installation: Installation and maintenance of air suspension components, including charge controllers, often require specialized knowledge and tools.It's recommended to have these services performed by trained automotive technicians or professionals familiar with Hyundai vehicles.
Keep in mind that the specific design and features of Hyundai charge controllers may vary between different Hyundai models and vehicle generations. It's important to consult the vehicle's owner's manual and seek advice from authorized Hyundai service centers or automotive experts for precise information and assistance regarding the air suspension system and its components.
Below you can find our editor's choice of the best hyundai charge controllers on the market
Renogy Rover 60 Amp 12V/24V/36V/48V DC Input MPPT Solar Charge Controller Auto Parameter Adjustable LCD Display Solar Panel Regulator fit for Gel Sealed Flooded and Lithium Battery
Renogy
Product description
The Rangy 60A Rover MPPT Charge Controller is an intelligent negative ground controller. Built with protections against reverse polarity, short-circuiting, overheating, & more, This MPPT controller is also capable of self-diagnosing itself in the event of an error. Its durable shell protects against general wear & tear, & aluminum heat sink allows for heat dissipation. The Rover 60A can automatically detect 12V/24V/36V/48V systems & can handle various battery options such as gel & lithium. Pair this charge controller with the Rangy BT-1 & Renogy DC Home app to view your system's performance in real time & make parameter changes straight from your smart device. Specification Nominal Voltage: 12V/24V/36V/48V Auto Recognition Rated Charge Current: 60A Rated Load Current: 20A Max. PV Input Power: 800W/12V; 1600W/24V; 2400W/36V; 3200W/48V Max. PV Input Voltage: 150 VDC (25°C), 140VDC (-25°C) Self-Consumption: 0. 7W-1. 2W Operating Temperature: -31 °C to 113 °C Temperature Compensation: -3mV/°C/2V (default) Dimensions: 285 x 205 x 102mm (11. 22 x 8. 07 x 4. 00in) Weight: 7. 9lbs Enclosure: IP32 Terminals: 25mm2 4AWG
- MPPT Technology: Innovative MPPT technology with high tracking efficiency up to 99% and peak conversion efficiency of 98%
- Multiple Protections Eliminate Safety Hazards: Electronic protection against reverse polarity, overcharging, over-discharging, overload, short-circuiting, and reverse current.
- Compatibility with multiple battery types for convenient use: Sealed Lead Acid, GEL, Flooded and Lithium Iron Phosphate.
- Easy to use LCD: LCD screen and multiple LED indicators for displaying system operation information, customizable parameters, and error codes.
- RS232: RS232 port allows the Rover PG to communicate with the BT-1 Bluetooth module, which can pair with the Renogy DC Home smartphone app.
User questions & answers
| Question: | What connection wires are required to put 2 of the rover 100a in parallel, as advertised |
| Answer: | It’s designed for 12 volt batteries but I’d be more concerned about the size of your solar panel- not to exceed the following rating for that controller. Rated Charge Current: 20A Max. PV Input Voltage: 26V |
| Question: | Can these be stacked |
| Answer: | In theory, Wattage=VoltageXAmps. A 100W panel at 14V will put out 7A, and at 12V, around 8A. If you string three together and they were operating at 100% efficiency, you could theoretically exceed the capacity, but that would be rare. However, I won't say you can use 3 just because of that possibility. |
| Question: | can i use 2 400w panels and charge 2 12v 100w lithium iorn batteries |
| Answer: | Thank you for the question! The negative 20a Voyager is an older model that will not have an activation mode for Li batteries. The new version both PG and NG will be able to activate Li batteries. Thank you, M.S. |
| Question: | Can i safely connect six (6) 160w renogy solar panels (each with 20v open voltage and 8a) to this charge controller |
| Answer: | yar, upside doin tyo |
Product features
Renogy Rover
60A MPPT Solar Charge Controller w/ LCD Display
LCD Screen & Multiple LEDs
Displaying system operating information and error codes.
Die-cast Aluminum Design
For efficient heat dissipation.
RS232 Communication Port
Allows communication with optional BT-1 Bluetooth Module and usage of Renogy DC Home App.
Temperature Sensor
Wide Temperature Compensation Range up to 176 F, non-polarized wires are insulated and protected from harsh environments.
Dorman 621-618 Radiator Fan Assembly with Controller for Select Hyundai / Kia Models
Product description
This engine cooling fan assembly is precision-engineered to match the fit and performance of the stock radiator fan on specific vehicle years, makes and models. It has been rigorously tested to ensure it cools as effectively as the original part.
- Ideal replacement - this engine cooling fan assembly was precision-engineered to match the fit and performance of the stock radiator fan assembly on specific vehicles
- Complete package - assembly is designed with the same materials and components as the original part
- Quality assured - motors are tested in laboratory settings to ensure performance
- Cost effective and reliable - trustworthy manufacturing for far less than same part at the dealership
- Ensure fit - to make sure this part fits your exact vehicle, input your make, model and trim level into the Amazon Garage
ALEKO SC101 Waterproof Solar Panel Regulator Charge Photovoltaic Controller 12V/24V Auto Detect
Product description
This is the ALEKO Solar Photovoltaic Controller. This solar controller is waterproof and can be used for 12V or 24V solar power generation system and solar street lights, or other small solar application gadgets. When using all solar controllers, the first step is to connect with the battery and the second step is to connect with the solar panel. The solar controller function is to manage the charge and discharge process in the solar power generation system. Meanwhile, it can turn the load on and off. The LED digital tube is used to display battery capacity, as well as charging and setting information. When using all solar controllers, the first step is to connect with the battery, and the second step is to connect with the solar panel.
- Waterproof solar charge controller. PWM Control, light control and time control. Solar controller: 12V / 24 V auto detect.
- Output loads: one output load. Battery Voltage: 12V / 24V. Current: 10A, 20A, 30A
- Max Power of solar panel: 360W / 720W. No load current: below 5mA. Identified Time: below 30 seconds.
- Environment Temperature: negative 20~60 Celsius. Humidity: 10~95 percent. Max input voltage: 36V Case: ABS Storage humidity: 10~80 percent.
- When using all solar controllers, the first step is to connect with the battery, and the second step is to connect with the solar panel.
User questions & answers
| Question: | Can you plug a load to the controller without a battery |
| Answer: | mine came with mounting brackets, wiring you need to buy from hardware store. |
| Question: | To charge two batteries in series (24V) what is the minimum voltage input |
| Answer: | had no problems with delivery. |
| Question: | Having some issues. Do you know if this charger will keep the solar panel from discharging the battery at night |
| Answer: | They didnt come with mine but it seems it's a hit and miss if there with the panel or not. Just open the panel and 10 or 12 gauge should work depending on distance. If its longer use 10 gauge. Solar panel should read around 28-32 volts. |
| Question: | what temperature will this operate at |
| Answer: | You should be using some sort of charging controller that would provide that. Im not sure about in the black box on the back without ripping mine apart which Im not willing to do. |
Renogy Rover 40 Amp 12V/24V DC Input MPPT Solar Charge Controller Auto Parameter Adjustable LCD Display Solar Panel Regulator fit for Gel Sealed Flooded and Lithium Battery
Renogy
Product description
"Specifications Rated Battery Current :40A Rated Load Current:20A Max. PV Input Short Current:50A Max. Battery Voltage :32V Max. Solar Input Voltage :100VDC Charge circuit voltage drop:≤ 0.26V Discharge circuit voltage drop : ≤ 0.15V Working Temperature :-35°C to +45°C Max. Terminal Size :8AWG Rated Load Current :10% to 90% NC Net Weight :4.41 lb. Overall Dimension :9.37 x 6.81 x 2.85in. "
- Automatically detect 12V or 24V DC system voltages Innovative MPPT technology with high tracking efficiency up to 99% and peak Conversion efficiency of 98%
- Die-cast aluminum design for heat dissipation and The capability of measuring the battery's temperature and remote monitoring Customizable charging voltages
- Charges over-discharged lithium-ion batteries Error code detection for easy self diagnoses
- Compatible with various Deep Cycle battery options: Sealed, Gel, Flooded, and Lithium Electronic protection: Overcharging, over-discharging, overload, and short circuit Reverse protection: Any combination of solar module and battery, without causing damage to any component 4-stage charging: Bulk, Boost, Float, and Equalization and LCD screen with programmable charging parameters
- RS232 port allows the Rover to communicate with the BT-1 Bluetooth module, which can pair with the Renogy DC Home smart phone app
User questions & answers
| Question: | If a conect my panels and my batteries to 24 v what will be the voltage that I¨ll recibe in the in load terminals |
| Answer: | Let say solar panel produce 36Vdc And battery voltage is 27Vdc The load terminal is about 27Vdc |
| Question: | What version of the 20amp model is being sold here from amazon? per the manufacturer website, renogy bt, is optimized for rover charge controllers f |
| Answer: | This is last year's model and currently sold out here the Renogy website and eBay. New models coming. Rich solar still has them at $89.00 for the 20amp..but offers no bt module |
| Question: | Can I disconnect the battery while the solar collector is still connected |
| Answer: | No, I dont think that's a good idea since they say connect batteries first the solor panels. If you was to shut ur system down, the go in reverse. Panels discount then battery. |
| Question: | Is anyone having problems with hf / vhf radio interference (rfi |
| Answer: | On MPPT and PMI controllers of different brands, RFI particularly in the VHF & UHF bands can be extreme. The solar panels do act as large antennas transmitting the interference. Some fairly simple decoupling circuitry can help. Right at the PV input, i've used a large forward diode into a large, CPU-grade electrolytic along with common-mode chokes on wiring before the diode. On the controller outputs, a "Corcom" type pi-filter helps a lot, but components in series with the output must accept full output current without much voltage drop. This can get rid of about 99% of RFI without too much problem. I do use solar and wind turbines for power at my off-grid property and run amateur radio equipment from 70 cm to 160 meter bands. |
Product features
Renogy Rover
20A/30A/40A MPPT Solar Charge Controller w/ LCD Display.
LCD Screen & Multiple LEDs
Displaying system operating information and error codes.
Die-cast Aluminum Design
For efficient heat dissipation.
RS232 Communication Port
Allows communication with optional BT-1 Bluetooth Module and usage of Renogy DC Home App.
Temperature Sensor
Wide Temperature Compensation Range up to 176 F, non-polarized wires are insulated and protected from harsh environments.
WZRELB New 60A MPPT Solar Charge Controller 12V/24V/48 Auto, 18V/36V Manual Max PV 170V,LCD Full Touch Screen Design,Battery Charger Controller
WZRELB
Product description
About WZRELB: Professional manufacturer for pure sine wave power inverter for 10 years, provide prompt reply, friendly customer service and 18-month . Rated voltage12/24/48VDC or Auto Rated charge current: 60A Maximum protection current : 63A Battery voltage identification range : 12V(DC9-DC15V) 24V(DC18-DC30V): 48V(DC36-DC60V MPPT Operating voltage range: 12V (DC18V DC150V) 24V(DC34V DC150V); 48V(DC65V-150V) Maximum PV input power : 12V(900W), 24V(1800W), 48V(3400W) Float voltage (can be customized) : 12V-13. 75V 24V-27. 5V 48V-55V Machine efficiency : 96. 5% 99% Weight: 6. 8LB Dimension : 10. 2 7. 6 3. 2 IN
- WZRELB MPPT solar charge controller: 60Amp, 12V / 24V / 48 Auto, 18V / 36V Mn, common negative ground. Input solar energy: 720W (12V); 1080W (18V); 1440W (24v); 2160W (36V); 2880W (48V), Max PV 170V.
- Maximum power point tracking technology: working with this technology, WZRELB solar MPPT significantly improves energy utilization of solar systems by lifting the solar tracking efficiency to 97%.
- Various automatic protection functions: Protection against overcharge, over discharge, over load, short circuit, reverse polarity, over heat and battery under voltage. Low-voltage disconnection (LVD) functioning to prevent damage of batteries due to over-discharge.
- Intelligent Touch Screen LCD display: Easily access to running parameters and status of the controller. Low-voltage disconnection (LVD) function and overall self-test and electronic protection functions to maximize battery life and improve system performance effectively.
- RS 485 Communication Interface: Communicateamong multiple computers within up to 1km. Real-time Monitor and set the parameters via mobile phone APP or PC software, keep your system running at full potential without any drop.
- Compatible devices: Laptop
SolarSynthesis Solar Charge Controller Waterproof, 5A Solar Panel Controller 6V/12V Auto 24Hours Load on IP67 Waterproof Solar Controller for Lead-Acid Battery Charge and Discharge Control
- Waterproof IP67 Rating
- Load On 24 Hours
- 6V/12V Auto
User questions & answers
| Question: | If in case you fail to connect the battery line first, will the unit still work if you start over again? (Battery connection then solar |
| Answer: | Yes, if you disconnect the solar line and then connect battery followed by solar it will reset and work fine. |
| Question: | Will this work with a NiMH battery |
| Answer: | No, this will only properly regulate a lead-acid battery of either 6 or 12 volts. |
| Question: | Why 3 sets of wires; solar, battery and load? One set for the solar panel then which set goes to the battery to be charged and why the 3rd set |
| Answer: | The charge controller regulates the charge and discharge of a lead acid battery. All power to and from the battery flows through the charge controller. The solar line connects to the solar panel (power in). The battery line connects to the battery and both delivers power from the solar line and pulls power to the load line. The load line connects to the DC device you are powering. |
| Question: | A 9 or 12 volt panel was recommended for a 6v battery. Will that pass throught the load or will the controller regulate it to 6v |
| Answer: | The controller will regulate the voltage to the battery. |
Product features
RUGGED AND RELIABLE
The SolarSynthesis charge controller is easy to install and operate; and with 24-Hour Load On, Smart PWM technology, and high efficiency, it will prevent the battery from over charging, over discharging and Reverse discharging to solar panel at nights
IP67 WATERPROOF RATING
The SolarSynthesis solar charge controller is IP67 Waterproof Rated making it well suited for even the harshest outdoor conditions.
Compact Size
The SolarSynthesis solar charge controller is small in size to fit in tight spaces in your power system. With a rated charge & discharge current of 5A, it can support up to a maximum solar panel wattage of 30W for 6V battery, or 60W for 12V battery
Auto Detect 6V / 12V
The SolarSynthesis solar charge controller will automatically detect your battery voltage: 6V/12V
Waterproof
The SolarSynthesis solar charge controller is IP67 Waterproof Rated making it well suited for even the harshest outdoor conditions.
Rugged and Reliable
The SolarSynthesis charge controller is easy to install and operate; and with 24-Hour Load On, Smart PWM technology, and high efficiency, it will prevent the battery from over charging, over discharging and Reverse discharging to solar panel at nights
AIR LIFT 25655 Load Controller I On Board Air Compressor System
Air Lift
Product description
Today, air Lift load support products are sold worldwide and are engineered to fit over 540 vehicles. Our extensive product line offers air helper springs for trucks, RVs, SUVs, CUVs and vans, and the most technologically advanced on-board air Compressor systems for on-the-go air spring control.
From the Manufacturer
The LoadController I is a quiet, high air flow, virtually vibration-free on board air compressor system. It inflates, maintains and controls air springs on heavy duty or commercial vehicles for maximum convenience and leveling on-the-go. The versatile compressor system makes it easy to adjust your air spring pressure for changes in load or road conditions.
This listing is for the single path system, kit number 25655.
Air Lift on board air systems are the most advanced in the industry and work with all brands of air springs.
Do I Need Single or Dual Path Control?
Purchase a single path/sensor model if you want to level your load evenly (to raise or lower the front or rear end of your vehicle). Two springs will inflate at the same rate at the same time.
Purchase a dual path/sensor model (kit number 25651) for uneven loads that need adjustment from one side of the vehicle to the other or for more advanced leveling capability. You can either control two air springs independently (for side-to-side leveling) or you can split the line to control a full set of four air springs, two at a time (side-to-side or front-to-rear).
Suggested Accessories
If you're still in need of air helper springs, be sure to consider the many different air spring options Air Lift offers. With a lifetime warranty, the easiest installations, and best-in-class customer service, it's easy to see why Air Lift air helper springs are America's favorite.
Best Warranty in the Business
Air Lift Company warrants that the LoadController I on board air compressor system will be free from defects in workmanship or materials for two years on the vehicle of original installation. This does not include installation or other service charges for replacement.
Air Suspension Solutions that Fit, Work and Last
Air Lift Company has been developing air spring suspension products for almost 60 years. The versatility of Air Lift air springs was proven during the early years of stock car racing. Air Lift products were used by most of the stock car racing teams for twenty years and the sponsored cars were among the toughest competitors on the NASCAR Grand National Circuit.
Today, Air Lift has won more SEMA (Specialty Equipment Market Association) awards for air spring development products than any other company. Air Lift products are sold throughout the world and can be engineered to fit almost any coil or leaf spring suspension. The extensive product line includes everything from air helper springs for cars, vans and trucks to full air suspension replacement and control systems for recreational vehicles, emergency vehicles, hot rods and lowered performance vehicles.
Quality and Performance – the Air Lift Difference
As of February 2007, Air Lift Company is proud to be ISO 9001:2000 certified. ISO 9001:2000 applies to organizations which follow rigorous quality standards, and are committed to continuous improvement. Air Lift Company is dedicated to making suspension products that fit, work, and last.
- Heavy duty on board air compressor system for air springs
- Includes compressor and gauge and wiring harness. Separate Pressure For Left And Right Air Springs
- Rugged quiet high air flow compressor is virtually vibration free
- Perfect for heavy duty or commercial applications or frequent use
- Single path system inflates two air springs at the same rate at the same time
User questions & answers
| Question: | Can you add a air tank to this system |
| Answer: | Nope. Only the rgb lighting is controlled. You motherboard’s bios controls that unless you have third party software. |
| Question: | Won’t the water under the truck hurt the compressure |
| Answer: | Yes, you can turn the RGB off and the fans will run normally. There is a remote control included with the fans. |
| Question: | Amazon says this won't work on a 2013 Ram 1500, is that true? Is it not just a compressor like the 25592, only heavier duty |
| Answer: | Hello Friend, NO they don't have to be connected to 5V RGB port. You could directly connect the SATA power supply and control the lights by the remote |
| Question: | On the fitment note it says front, does that mean mounted in the front of vehicle or is it for front suspension |
| Answer: | Hello how are you? We do not have that bracket model. Regards! |
Knowtek DSE5220 Auto Controller AMF DSE 5220 for Genset Generator Alternator
Product description
Auto Controller DSE5220 AMF DSE 5220 for Genset Generator Alternator
The DSE 5220 AMF Generator Controller designed to automatically start and stop diesel
and gas generating sets that include non electronic engines. The module also provides excellent engine monitoring and protection features.
The DSE 5220 Controller has the ability to monitor under speed, over speed, charge failure, emergency stop, low oil pressure, high engine temperature, fail to start, fail to stop, under/over generator volts,over current, under/over generator frequency, low/high DC battery volts, low fuel alarm and loss of the speed sensing signal. The module displays fault conditions on the LCD display and via the LED indicators on the front.
DSE Generator Controller DSE5220 include RS232 or RS485 communications capabilities for linking to a PC, sending SMS messages and interfacing with new and existing building management systems.
OPERATION
DSE5220 is operated using the front STOP, AUTO and MANUAL push buttons.
CONFIGURATION
The modules can be configured using the front panel buttons or by using the DSE810 interface and PC software.
PC Software
DSE5220 Auto Start Generator Controller has the ability to be controlled, configured and monitored from a remote PC, using the DSE810 interface.
Application: >10 KW gas & diesel generator started with battery
- The modules can be configured using the front panel buttons or by using the DSE810 interface and PC software.
- DSE 5220 AMF Generator Controller designed to automatically start and stop diesel and gas generating sets that include non electronic engines.
- The module also provides excellent engine monitoring and protection features
- DSE Generator Controller DSE5220 include RS232 or RS485 communications capabilities for linking to a PC, sending SMS messages and interfacing with new and existing building management systems.
- the module displays fault conditions on the LCD display and via the LED indicators on the front.
AIR LIFT 25812 Load Controller II Air Compressor System
Product description
Today, Air Lift load support products are sold worldwide and are engineered to fit over 540 vehicles. Our extensive product line offers air helper springs for trucks, RVs, SUVs, CUVs and vans, and the most technologically advanced on-board air compressor systems for on-the-go air spring control.
From the Manufacturer
The LoadController II is an economically priced, popular on board air compressor system. It inflates, maintains and controls air springs on light-to-medium duty vehicles for maximum convenience and leveling on-the-go. The versatile compressor system makes it easy to adjust your air spring pressure for changes in load or road conditions. This is Air Lift's most popular compressor and air control system for trucks, vans, and SUVs. All kits include Air Lift's exclusive wiring harness for fast, easy installation. For increased safety and to eliminate the major cause of air spring failure, the Low Pressure Sensor automatically activates the compressor if air spring pressure falls below the minimum safe level.
This listing is for the dual path system, kit number 25812.
Air Lift on board air systems are the most advanced in the industry and work with all brands of air springs.
Do I Need Single or Dual Path Control?
Purchase a single path/sensor model (kit number 25592) if you want to level your load evenly (to raise or lower the front or rear end of your vehicle). Two springs will inflate at the same rate at the same time.
Purchase a dual path/sensor model for uneven loads that need adjustment from one side of the vehicle to the other or for more advanced leveling capability. You can either control two air springs independently (for side-to-side leveling) or you can split the line to control a full set of four air springs, two at a time (side-to-side or front-to-rear).
Suggested Accessories
If you're still in need of air helper springs, be sure to consider the many different air spring options Air Lift offers. With a lifetime warranty, the easiest installations, and best-in-class customer service, it's easy to see why Air Lift air helper springs are America's favorite.
Best Warranty in the Business
Air Lift Company warrants that the LoadController II on board air compressor system will be free from defects in workmanship or materials for two years on the vehicle of original installation. This does not include installation or other service charges for replacement.
Air Suspension Solutions that Fit, Work and Last
Air Lift Company has been developing air spring suspension products for almost 60 years. The versatility of Air Lift air springs was proven during the early years of stock car racing. Air Lift products were used by most of the stock car racing teams for twenty years and the sponsored cars were among the toughest competitors on the NASCAR Grand National Circuit.
Today, Air Lift has won more SEMA (Specialty Equipment Market Association) awards for air spring development products than any other company. Air Lift products are sold throughout the world and can be engineered to fit almost any coil or leaf spring suspension. The extensive product line includes everything from air helper springs for cars, vans and trucks to full air suspension replacement and control systems for recreational vehicles, emergency vehicles, hot rods and lowered performance vehicles.
Quality and Performance – the Air Lift Difference
As of February 2007, Air Lift Company is proud to be ISO 9001:2000 certified. ISO 9001:2000 applies to organizations which follow rigorous quality standards, and are committed to continuous improvement. Air Lift Company is dedicated to making suspension products that fit, work, and last.
- Levels vehicle side to side
- Comes with new wiring harness
- Easier and faster installation
- Ready air supple
- 5 psi low pressure sensor
User questions & answers
| Question: | Can I buy gauge along |
| Answer: | When we set ours up it had two choices gel cell or flooded so I guess not, |
| Question: | Can u add a storage tank for an air horn |
| Answer: | I believe it does, although it would be readily available if not, |
| Question: | What size is the air line |
| Answer: | Thank you so much for asking. NO it is not. We do not "own" the content of this listing in the Amazon catalog and for some strange reason we don't understand, we struggle repeatedly to keep the content accurate for the Xantrax listings in particular. This is in fact a 110W panel kit. We will contact Amazon once again with correct data, and hopefully it will be corrected. |
| Question: | will this system support rancho rs9000 shocks . my compressor is going out |
| Answer: | Hello, yes you can wire two in parallel. Each controller would need to have a PV array wired to it. Thank you. |
Air Lift 25856 Load Controller Dual Heavy Duty Compressor
Product description
Load controller. Dual. Heavy-duty compressor. Controlling two air springs independently. Quit high air flow. Virtually vibration-free. Free mounting pod included with all load controller single or dual Systems. Can also be installed in any 2-1/8" Gauge pod or as an In-Dash flush mount.
- Brand: Air Lift Company
- Part Number: 25856
- Load controller Dual Gauge
User questions & answers
| Question: | What is max psi the pump will put out |
| Answer: | What does this warranty cover?This Limited Warranty is provided by Xantrex Technology, Inc. ("Xantrex") and covers defects in workmanship and materials in your Xantrex PRO Inverter (XM 1800 or XM 1000). This warranty period lasts for 1 year from the date of purchase at the point of sale to you, the original end user customer. You require proof of purchase to make warranty claims.What will Xantrex do? Xantrex will, at its option, repair or replace the defective product free of charge, provided that you notify Xantrex of the product defect within the Warranty Period, and provided that Xantrex through inspection establishes the existence of such a defect and that it is covered by this Limited Warranty. Xantrex will, at its option, use new and/or reconditioned parts in performing warranty repair and building replacement products. Xantrex reserves the right to use parts or products of original or improved design in the repair or replacement. If Xantrex repairs or replaces a product, its warranty continues for the remaining portion of the original Warranty Period or 90 days from the date of the return shipment to the customer, whichever is greater. All replaced products and all parts removed from repaired products become the property of Xantrex.Xantrex covers both parts and labor necessary to repair the product, and return shipment to the customer via a Xantrex-selected non-expedited surface freight within the contiguous United States and Canada. Alaska and Hawaii are excluded. Contact Xantrex Customer Service for details on freight policy for return shipments outside of the contiguous United States and Canada. |
| Question: | What the fuse number on |
| Answer: | Download the manual fore more info. You can use the gfi outlet or wire direct with romex. You need also large battery cables and a large fuse, |
| Question: | what is max pressure, duty cycle |
| Answer: | I did not have this problem |
| Question: | i have a 2003 jeep grand Cherokee will this work |
| Answer: | I don't think so, it's designed to convert 12volt to 120volt. We have had problems with this particular unit in that it gives us an error code indicating it's overheating.. it does this even if the outside temp is below freezing when we first turn it on. For home use, you might want a bigger unit. |
AIR LIFT 25592 Load Controller II On Board Air Compressor System
Air Lift
Product description
Today, air Lift load support products are sold worldwide and are engineered to fit over 540 vehicles. Our extensive product line offers air helper springs for trucks, RVs, SUVs, CUVs and vans, and the most technologically advanced on-board air Compressor systems for on-the-go air spring control.
From the Manufacturer
The LoadController II is an economically priced, popular on board air compressor system. It inflates, maintains and controls air springs on light-to-medium duty vehicles for maximum convenience and leveling on-the-go. The versatile compressor system makes it easy to adjust your air spring pressure for changes in load or road conditions. This is Air Lift's most popular compressor and air control system for trucks, vans, and SUVs. All kits include Air Lift's exclusive wiring harness for fast, easy installation. For increased safety and to eliminate the major cause of air spring failure, the Low Pressure Sensor automatically activates the compressor if air spring pressure falls below the minimum safe level.
This listing is for the single path system, kit number 25592.
Air Lift on board air systems are the most advanced in the industry and work with all brands of air springs.
Do I Need Single or Dual Path Control?
Purchase a single path/sensor model if you want to level your load evenly (to raise or lower the front or rear end of your vehicle). Two springs will inflate at the same rate at the same time.
Purchase a dual path/sensor model (kit number 25812) for uneven loads that need adjustment from one side of the vehicle to the other or for more advanced leveling capability. You can either control two air springs independently (for side-to-side leveling) or you can split the line to control a full set of four air springs, two at a time (side-to-side or front-to-rear).
Suggested Accessories
If you're still in need of air helper springs, be sure to consider the many different air spring options Air Lift offers. With a lifetime warranty, the easiest installations, and best-in-class customer service, it's easy to see why Air Lift air helper springs are America's favorite.
Best Warranty in the Business
Air Lift Company warrants that the LoadController II on board air compressor system will be free from defects in workmanship or materials for two years on the vehicle of original installation. This does not include installation or other service charges for replacement.
Air Suspension Solutions that Fit, Work and Last
Air Lift Company has been developing air spring suspension products for almost 60 years. The versatility of Air Lift air springs was proven during the early years of stock car racing. Air Lift products were used by most of the stock car racing teams for twenty years and the sponsored cars were among the toughest competitors on the NASCAR Grand National Circuit.
Today, Air Lift has won more SEMA (Specialty Equipment Market Association) awards for air spring development products than any other company. Air Lift products are sold throughout the world and can be engineered to fit almost any coil or leaf spring suspension. The extensive product line includes everything from air helper springs for cars, vans and trucks to full air suspension replacement and control systems for recreational vehicles, emergency vehicles, hot rods and lowered performance vehicles.
Quality and Performance – the Air Lift Difference
As of February 2007, Air Lift Company is proud to be ISO 9001:2000 certified. ISO 9001:2000 applies to organizations which follow rigorous quality standards, and are committed to continuous improvement. Air Lift Company is dedicated to making suspension products that fit, work, and last.
- Levels vehicles Side to side
- Comes with new wiring harness
- Easier and faster installation
- Ready air supply
- 5 psi low pressure sensor
User questions & answers
| Question: | How does it ship |
| Answer: | It is very well contained in a shipping box made of strong card board, mine came with no damage what so ever, like every thing I've ordered from amazon, hope this helps |
| Question: | Will this work with the air lift 60824 air lift |
| Answer: | Hi Ernie, Yes, it will work.Thanks! |
| Question: | Will this work with air shocks |
| Answer: | It should work the same. But you may want to check with vehicle manufacturer. |
| Question: | How exactly do you control the pressure you want? Is there a regulator or something? And also how do you bleed the pressure off when not towing loads |
| Answer: | There is a guage, black toggle switch and silver button on control panel mounted inside of cab. To add air press the black toggle switch and watch the guage. To release air press the silver button. Works well. I just installed my air bags and controller a few weeks ago and hauled a golf cart in back of my F350 and pulled a tag along 26 foot camper to beach for July 4th week. Whole system worked really nice. I could tell a huge difference in the way the truck handled with that much weight. Well worth the money. I had to play with my air bags adjusting air pressure to get the results I wanted. My final out come on pressure was about 75 to 80 lbs of pressure. Hope this helps. One final note. The controller has a sensor to keep 10 lbs of pressure in air bags when not hauling. Just a safety measure to keep from damaging the bags but you cannot see any difference when truck is unloaded. |
Product features
About Us
Air Lift Company has developed dependable air spring suspension products since our inception in 1949. Our original product, a rubber air spring inserted into a car’s factory coil spring, was created and patented in 1950. We’ve come a long way since 1949 and are proud to be a dedicated suspension specialist company.Our extensive product line offers air helper springs for trucks, RVs, SUVs, CUVs and vans, and the most technologically advanced on-board air compressor systems for on-the-go air spring control.
Latest Reviews
View all
Table Saw With Lasers
- Updated: 23.01.2023
- Read reviews
Electronic Cigarette For Smoking
- Updated: 08.05.2023
- Read reviews
Fishing Apparel Brands
- Updated: 21.04.2023
- Read reviews
Japanese Candies
- Updated: 09.06.2023
- Read reviews
Drones Under 100S
- Updated: 11.05.2023
- Read reviews