11 best line lock kit

Product description

Application:

For drag racing to lock the front tires of the car



Features and Benefits:

Stainless steel valve assembly for the ultimate in corrosion control

The electric coil is fully enclosed in epoxy for reliability

The finned housing not only looks good but helps to dissipate heat

Wide, lightweight base for better mounting stability

Easily serviced in the field

Includes an extra threaded port for brake line pressure gauge



Dimensions& Material:

Material:Stainless Steel & Aluminum

Placement on Vehicle:Front

Model:Roll Control Hill Holder Kit

Rotor Style:Dimpled,Drilled,Slotted

Voltage:12-24VDC



Package Included:

1 x Front Brake Line Lock Kit (with installatioin instruction)

• ✿APPLICATION:For drag racing to lock the front tires of the car,Works with 12 -24 volt electric systems.It can handle pressure spikes up to 1000 psi.
• ✿QUICK BRAKE:Keep the brake pressure on the front or rear brake to keep the vehicle on the start line on the hill or start line.
• ✿EASY TO USE: This high quality solenoid valve controls both the front brake and the rear brake. Make the brakes more convenient.The line lock kit contains a heavy duty push button switch, switch bracket, coiled wire, rebuildable line-lock valve, fuse holder, and indicator light
• ✿EXCELLENT AFTERMARKET REPLACEMENT: Exquisite workmanship, original standard, you can direct replacement for old or broken one.
• ✿WARRANTY:PQY provides 1 year's warranty for the product.If you have any question,please send us mail,and we will respond you in 24 hours except weekend and holiday.

User questions & answers

Question:	Do you have to hold the switch or can you push it on and it stays on until you release it
Answer:	Yes, you can send us email, we will send the instruction book to you. Best Regards, John

Product description

Specification:

Condition: 100% Brand New

Material: Stainless Steel

Color: Black

Fitment: Works with 12-16 volt electric systems



Package list:

1 * Brake Lock

1 * Swtich Accessory

1 * Light Accessory

3 * Screws

1 * User Manual

• ★Brake Lock: Brake lock fit for 12-16 volt electrical systems. It can handle pressure spikes up to 1000 psi.
• ★Quick Brake: Keep the brake pressure on the front or rear brake to keep the vehicle on the start line on the hill or start line.
• ★Easy to Use: This high quality solenoid valve controls both the front brake and the rear brake. Make the brakes more convenient.
• ★Great Aftermarket Replacement: Exquisite workmanship, original standard, you can direct replacement for old or broken one. Easy to install.
• ★Quality Assurance: 12 months worry-free warranty.We are a professional seller. Please feel free to contact us if you are having any trouble using our product.

User questions & answers

Question:	Can this be used for a parking brake replacement
Answer:	No,you do not have to hold the switch .Just pushing it on is ok !
Question:	Do you have to hold button to keep it engaged
Answer:	Yes, if you need a disc seat, please send us email, we will help you solve this problem!
Question:	What size fittings
Answer:	No it comes on and off at the cable end.
Question:	This is a normally open solenoid
Answer:	3/16 in, and during our test, it's can easily hold up to 250lb!

Product description

❤❤ Qiilu ❤❤

❥We are a professional shop producing high-quality auto parts;

❥ Strict Quality Standard: All the products are tested based on strict quality standard before into the market;

❥Perfect replacement: easy to install, perfectly compatible with your original car.

Specification:

Condition: 100% Brand New

Material: Stainless Steel

Color: Red

Fitment: 

Brake Line Lock Kit works with 12-16 volt electric systems

Package List:：

1 * Brake Lock

1 * Swtich Accessory

1 * Light Accessory

3 * Screws

1 * User Manual

• Brake Line Lock Kit works with 12-16 volt electric systems.
• Roll Control Brake Line can handle pressure spikes up to 1000 psi.
• Electric hydraulic line lock can hold the brake pressure to the front or rear brakes to hold the vehicle on a hill or the starting line at the drags.
• Park Lock Solenoid Lock Electric Kit can control to make the front and rear brakes synchronized.
• This roll control line lock can be used on either the front or rear brakes of your vehicle.

• 1.WARM UP THE REAR TIRES, RUN FASTER- SPELAB brake line lock can be widely used in various models which allows the front brakes to lock independently of the rear brakes via a switch. It also allows the front brakes to be locked and the rear brakes to be open, so that the driver to spin the rear wheels without wasting the rear brakes.
• 2.FEATURES: Each kit includes a inline fuse connector, indicator light, snap-action switch, 2pcs 1/8-27NPT brass adapter and 3pcs mounting screws. High quality stainless steel valve assembly gives it strong sturdiness.
• 3.ADVANTAGES: Fully-enclosed epoxy-molded electrical coil makes it reliable; The attractive aluminum fin shell enables it to cool down; The wider lightweight base provides better mounting stability; besides, it has extra threaded port for brake line pressure gauge.
• 4.ATTENTION: This line lock is to be installed in the front braking system (for rear wheel drive vehicles) for drag race staging or burnouts. Alternatively, in the rear braking system for front wheel drive vehicles. This solenoid will not impede normal braking when installed correctly.
• 5.WHAT YOU GET: Our worry-free 12-month, and great customer service. We are looking forward to your feedback, your satisfaction is our driving force. If you have any questions, please feel free to contact us, we will serve you wholeheartedly.

User questions & answers

Question:	Can this work as a hill assist? Meaning, when it is engaged on a hill an released does it prevent a manual type vehicle from rolling back on a hill
Answer:	It will work as a temporary brake but it is not good as a parking brake. While in use it will have a small draw on the battery thus over time it could kill the battery. Additionally a parking brake is designed to be mechanical as a seperate system. This means it wont fail due to leaks or loss of pressure. In short the answer is no.
Question:	How do you adjust it to make front wheel brake tighter
Answer:	Yes, it's not designed to be activated for very long, 10 to 30 seconds. It will most likely overheat if activated for over a minute or two.
Question:	What adaptors will i need for a 1986 ford mustang gt convertible
Answer:	The solenoid is a npt thread ..i went to stainless steel flexible lines so i needed a inverted 7/16 3an fitting for my application. Running from the master cylinder to the line lock and back to the brake line junction block
Question:	Can this be used for a parking brake replacement
Answer:	Yes, normally open until energised

Product features

SPELAB Line Lock Brake Lock Roll Control Electric Kit

Line lock kit: Used primarily in drag racing to provide positive locking action to the front wheels to reduce the chance of ''Rolling the Lights'' and produce more effective burnouts for heating the tires. Easy to do a burn out by locking the front tires and releasing the back brakes with this system.

Line locks are often used for burnouts by fully locking the front wheels and then engaging the gas pedal and disengaging the clutch pedal, this makes the rear tires spin but keeps the car stationary.

Accessories:

1 pcs Inline Fuse Connector

Accessories:

1 pcs Indicator Light

Accessories:

1 pcs Snap-action Switch

Accessories:

2pcs 1/8-27NPT Brass Adapter

3pcs Mounting Screws

Product description

Specifications

Fitment: Universal

Placement on vehicle: Front

Voltage:12-24VDC Electric Systems

Handle Pressure:Up to 3000 psi

Color: Silver

Features:

Can make the front and rear brakes synchronized

Can lock your front or rear brakes at will

Notice:

* Professional installation is highly recommended (No Instruction Included)

* For any needs please contact us

• Fitment: Universal
• Placement on vehicle: Front
• Voltage: 12-24V DC Electric Systems
• Handle Pressure: Up to 3000 psi
• Professional installation is highly recommended (No Instruction Included)

• Brake line lock can be widely used in various models which allows the front brakes to lock independently of the rear brakes via a switch. It also allows the front brakes to be locked and the rear brakes to be open, so that the driver to spin the rear wheels without wasting the rear brakes.
• Easy to do a burn out by locking the front tires and releasing the back brakes with this system. Line locks are often used for burnouts by fully locking the front wheels and then engaging the gas pedal and disengaging the clutch pedal, this makes the rear tires spin but keeps the car stationary
• Each kit includes a inline fuse connector, indicator light, snap-action switch, 2pcs 1/8-27NPT brass adapter and 3pcs mounting screws. High quality stainless steel valve assembly gives it strong sturdiness.Works with 12 -24 volt electric systems
• Fully-enclosed epoxy-molded electrical coil makes it reliable; The attractive aluminum fin shell enables it to cool down; The wider lightweight base provides better mounting stability; besides, it has extra threaded port for brake line pressure gauge.
• ATTENTION: This line lock is to be installed in the front braking system (for rear wheel drive vehicles) for drag race staging or burnouts. Alternatively, in the rear braking system for front wheel drive vehicles. This solenoid will not impede normal braking when installed correctly.

Product features

Line lock kit

Color:Black Silver

• Used primarily in drag racing to provide positive locking action to the front wheels to reduce the chance of ''Rolling the Lights'' and produce more effective burnouts for heating the tires. Easy to do a burn out by locking the front tires and releasing the back brakes with this system.L
• ine locks are often used for burnouts by fully locking the front wheels and then engaging the gas pedal and disengaging the clutch pedal, this makes the rear tires spin but keeps the car stationary.

Notes

1. Should not be engaged for more than 60 seconds
2. The port marked "M" is the inlet. Connect the line coming from the master cylinder (through the proportioning valve in most cases) to this port. Confirm with the drawings in these instructions. Use teflon tape on the npt fittings into the solenoid.
3. Use any of the other three remaining npt ports to go to the rear (or front depending on your application) brakes and plug off the remaining two open ports using 1/8” npt plugs. Use teflon tape on the 1/8” npt fittings.
4. Connect the black wire from the line lock to a clean chassis ground, or directly to the battery negativeterminal if desired.
5. Make all connections using the appropriate size lines, fittings and unions etc.
6. If one line requires removal from the proportioning valve (some applications only), use an appropriate SAE inverted flare plug to seal the port. (no teflon tape is used on SAE inverted flare fittings)

• Voltage: 12-24 volt DC operation
• Quality stainless steel valve assembly for resistance to corrosion and durability.
• Line Lock Kit: Controls the front or rear brakes, is a device that allows the front brakes to lock independently of the rear brakes via a switch.
• Line lock is designed to be mechanical as a separate system, this means it wont fail due to leaks or loss of pressure.
• Line locks are used for burnouts by fully locking the front wheels and then engaging the gas pedal and disengaging the clutch pedal, (which is often used for combustion) this makes the rear tires spin but keeps the car stationary.

User questions & answers

Question:	Can this be left on overnight without burning it out I want to use it instead of the parking brake
Answer:	You don’t need to adjust it, the only adjustment is with your foot on the brake pedal. How it works is you press down reasonably hard on the brake pedal, activate the line lock and release the pedal, due to this being plumbed into the front brakes it will retain the pressure and hold the front brakes while the rear is released. So all of your adjustment is dependent on how hard you push the pedal. Wanna do a rolling burnout, push lightly on the brakes and then activate and release pedal to just hold some drag on the brakes. Once you release the button it will release the pressure and to reactivate you would have to start over or do a quick brake jab and hit the button, but I don’t suggest you try that.
Question:	Does this have 2 inlets and 2 outlets
Answer:	It depends on where u put it. It’s easiest to take it apart first and take your lines/fittings with so u can match up exactly what u need. Sometimes u can even buy the lines already made up with the correct fittings and u just use the tubing bender to shape them the way u need them
Question:	So I see 4 ports..... 1 inlet and 2 outlets for front brakes and one for the rear which is optional
Answer:	No it cannot. It will only hold the brake as long as you’re holding the button

Product description

One Road King Truck Parts 30 piece DOT push lock, 3/8” brass fitting kit Assortment of the most popular 3/8” solid brass push lock fittings Make repairs in your shop or on the road and eliminate down time Pieces that contain a threaded end have thread sealant pre applied Includes a durable yet light weight plastic storage container with flip lock tabs Container won’t rust and will keep all your parts securely in place Parts are designed to accommodate nylon tubing commonly used in air brake lines Replaces: Tramec Sloan️#424315 Phillips️#80-1291 Tectran️#CAB27 Approximate dimensions = 10 3/4" x 7”x 2” Approximate net weight = 3 lbs 12 oz Kit consists of the following all brass components: 4- Straight male push lock connector 3/8” tube 3/8” NPT pipe thread 6- Straight push lock union connector 3/8” tube 3/8” tube 2- Straight bulkhead push lock connector 3/8” tube 3/8” tube 2- 45* swivel elbow push lock connector 3/8” tube 3/8” swivel NPT pipe thread 2- 45* elbow push lock connector 3/8” tube 3/8” NPT pipe thread 2- 90* union elbow push lock connector 3/8” tube 3/8” tube 2- 90* swivel elbow push lock connector 3/8” tube 3/8” swivel NPT pipe thread 2- 90* elbow push lock connector 3/8” tube 3/8” NPT pipe thread 2- Branch tee push lock connector 3/8” tube 3/8” tube 3/8” NPT pipe thread 2- Swivel branch tee push lock connector 3/8” tube 3/8” tube 3/8”swivel NPT pipe thread 4- Push lock union tee 3/8” tube 3/8” tube 3/8” tube

• One Road King Truck Parts 30 piece 3/8" DOT approved, push lock, brass fitting assortment kit
• Assortment of the most popular 3/8” solid brass push lock fittings
• Pieces that contain a threaded end have thread sealant pre applied
• Includes a durable yet light weight plastic storage container with flip lock tabs. Container won’t rust and will keep all your parts securely in place
• Parts are designed to accommodate nylon tubing commonly used in air brake lines

Product description

• DOT Air Brake Line Fittings Brass Push to Connect Kit
• Kit Contains the Following Brass Fittings:
• (2 pcs) Straight Male Push Lock Connector 3/8" Tube, 1/2" NPT Pipe Thread
• (2 pcs) Straight Male Push Lock Connector 3/8" Tube, 3/8" NPT Pipe Thread
• (2 pcs) Straight Male Push Lock Connector 1/2" Tube, 1/2" NPT Pipe Thread
• (2 pcs) Straight Male Push Lock Connector 1/2" Tube, 3/8" NPT Pipe Thread
• (2 pcs) Straight Male Push Lock Connector 1/2" Tube, 1/4" NPT Pipe Thread
• (2 pcs) 90⁰ Male Elbow Push Lock Connector 3/8" Tube, 1/4" NPT Pipe Thread.
• (2 pcs) 90⁰ Male Elbow Push Lock Lock Connector 3/8" Tube, 3/8" NPT Pipe Thread
• (2 pcs) 90⁰ Male Elbow Push Lock Connector 1/2" Tube, 1/2" NPT Pipe Thread
• (2 pcs) 90⁰ Male Elbow Push Lock Connector 1/2" Tube, 3/8" NPT Pipe Thread.
• (2 pcs) 90⁰ Male Elbow Push Lock Connector 1/2" Tube, 1/4" NPT Pipe Thread
• (2 pcs) Push Lock Union Tee 1/2" Tube, 1/2" Tube, 1/2" Tube
• (2 pcs) Push Lock Union Tee 3/8" Tube, 3/8" Tube, 3/8" Tube
• (2 pcs) Straight Push Lock Union Connector 1/2" Tube, 1/2" Tube
• (2 pcs) Straight Push Lock Union Connector 3/8" Tube, 3/8" Tube

• DOT Air Brake Line Fittings Brass Push to Connect Kit (1/4", 3/8", & 1/2") 28 pcs
• Straight Male Push Lock Connector (1/4", 3/8 & 1/2") : 2 Pcs Each Size. 10 Total
• 90⁰ Male Elbow Push Lock Connector (1/4", 3/8 & 1/2") : 2 Pcs Each Size. 10 Total
• Push Lock Union Tee 1/2" Tube (1/4", 3/8 & 1/2") : 2 Pcs Each Size. 4 Total
• Straight Push Lock Union Connector (1/4", 3/8 & 1/2") : 2 Pcs Each Size. 4 Total

Product description

NBP Rubber Fuel Hose Features:

Fuel Hose Material: (NBR)Nitrile Butadiene Rubber

Fuel Hose Outside Diameter: 6.30inch/16mm

Fuel Hose Inner Diameter: 3.74inch/9.5mm

Fuel Hose Length: 25feet/7.5m

Fuel Hose Working Pressure:217.5-290PSI

Application: fit for Petrol and Diesel

fuel filter/regulator:

This fuel filter features an internal bypass that regulates fuel output pressure to 58psi (4 Bar)

The filter features a 3/8 male inlet, 5/16 male return outlet, and a 3/8 female supply outlet

255LpH maximum fuel pump flow rate

Package including:

1Pc fuel filter/58psi regulator

1Pc 6AN 25 feet of high-pressure fuel injection hose

1Pc 6AN to 5/16" Fuel Filter Return Line Fitting

2Pcs 6AN to 3/8" Fuel Filter Feed Line Fittings

2Pcs -6AN to 1/4" NPT Fuel Pump Adapters

2Pcs 45 Degree -6AN Female to 3/8" Push Lock hose fittings

6Pcs straight -6AN Female to 3/8" Push Lock hose fittings

• This LS conversion fuel line kit comes with 25-feet of rated fuel injection hose and all the fittings to plumb your fuel lines from the fuel pump forward
• All the fittings feature a reusable spin-lock connector that does not require special tools to disassemble
• Fuel Filter/Pressure Regulator provides 58 PSI pressure for fuel rail
• All items tested for reliability, durability and performance
• This is made with excellent mechanical stability and corrosion protection

Product description

Specification:

Condition: 100% Brand New

Material: Stainless Steel

Color: Blue

Fitment: Works with 12-16 volt electric systems



Package List:

1 * Brake Lock

1 * Swtich Accessory

1 * Light Accessory

3 * Screws

1 * User Manual

• High pressure brake -- This brake Line Lock can handle pressure spikes up to 1000 psi. The easily installed solenoid provides the brake holding capacity you are looking for.
• Increase tire friction -- In the racing competition, keep the tires moving, let the tires warm up, and generate as much friction as possible with the ground, so that at the beginning of the race, the car starts at the maximum acceleration, as far as possible Achieve maximum speed in a short time.
• Application -- It can be used for racing or for street applications if you need a hill holder while stopped on an uphill grade. This high quality solenoid can be used on either the front or rear brakes of your vehicle.
• Make the front and rear brakes synchronized -- Hold the brake pressure to the front or rear brakes to hold the vehicle on a hill or the starting line at the drags. Easy to do a burn out by locking the front tires and releasing the back brakes with this system. Works with 12-16 volt electric systems.
• working principle of Line lock kit -- Controls the front or rear brakes. Easy to do a burn out by locking the front tires and releasing the back brakes with this system.

User questions & answers

Question:	what color is light accessory
Answer:	Not supposed to, selinoid is not meant to be held over 1min. Could potentially wear out/damage the internals. It would technically work, but I wouldn't trust it, plus a constant 12v to keep it locked would probably drain your battery.