12 best fuse accessories

• Protect original circuit
• Plug into an existing fuse holder
• Heavy Duty 16 Gauge Red Color Wire
• 15 AMP Fuse x 10
• Add-a-circuit Fuse x 10

User questions & answers

Question:	Can i use this for interior led strip light (12v, 10amp recommended
Answer:	Yes but 2 would be better goats are food aggressive and will headbut each other
Question:	Can I use a to connect to a 20 amp mini fuse
Answer:	Yes other lamb nipples will
Question:	I am trying to hardwire a dash cam. the harness for the dash cam has a black and red wire. do i only need to connect the red wire? what about the blk
Answer:	No you can't
Question:	What is the maximum amperage these fuses can hold? Can it support two 25A
Answer:	Local farm stores

Product description

Specifications:

● Rated Voltage : 250V;

● Rated Current : 10A;

● Cutoff Temperature : 100℃

● Fuse Size : 4 x 13 mm / 0.16" x 0.51" (D*L);

● Total Length : 64mm / 2.52";

● Main Material : Metal;

● Package Contents : 20 pcs x Temperature Fuse.



Description:

Metal RY thermal fuse (thermal cut off, temperature fuse) which use heat sensitive grain materials (organic chemical) as heat sensitive material.

Function is to cut off the circuit of appliances when temperature exceed specified TF value because of unexpected fault.

This is a single-use device that cannot be reset and must be replaced when it fails or is triggered.

Widely used in electric current provider, power switch, computer, telephone, home appliance, communication products, all kinds of instrument and electronic and electric components, motor and all kinds of small home appliance such as electric iron, thermoelectric blower, microwave oven, refrigerator etc. as heat protection, etc.

• Rated Voltage : 250V; Rated Current : 10A; Cutoff Temperature : 100℃
• This is a single-use device that cannot be reset and must be replaced when it fails or is triggered.
• The use of thermal particulate materials as a thermal insulation of the metal thermal fuse.
• Function is to cut off the circuit of appliances when temperature exceed specified TF value because of unexpected fault.
• Widely used in electric current provider, power switch, computer, telephone, home appliance, communication products, all kinds of instrument and electronic and electric components, motor and all kinds of small home appliance such as electric iron, thermoelectric blower, microwave oven, refrigerator etc. as heat protection, etc.

• LEDGlow Mini Blade Fuse Expandable Circuit Tap Adapter Powers 12-Volt Accessories such as Underglow & Interior Lights from the Vehicle's Fuse Panel
• Features Includes Mini Size Expandable Circuit with 3/8" Wide 4 Amp Fuse
• Includes Step-By-Step Installation Instructions
• LEDGlow Guarantee with One Year Limited Warranty & Free Lifetime Technical Support

User questions & answers

Question:	I have an 07 civic how do I find which type of fuse to use and where do I plug it in on my fuse box
Answer:	VERSATILE USE - Perfect for a large variety of use cases such as holding water or food, this bucket holds 4.5 quarts. No hole in bottom because it can be used for water also.
Question:	Would it work with Forf 2015 F
Answer:	Its like 2 feet buy 2 feet
Question:	Will this work in a 2004 honda civic vp
Answer:	Off hand I can’t say but my goat eats freely from it.
Question:	How do i install this?? 06 Scion tc , i have the multi color kit for interior
Answer:	Yes, it mounts to the wall.

Product features

Quick Install

With a few simple steps the Mini Expandable Circuit can be installed and you’ll be able to connect 12v accessories to your vehicle’s fuse panel.

Select a Stock Fuse

Locate your vehicle fuse panel and select a stock fuse that does not exceed 20 amps as the source for installing the expandable circuit.

Remove the Stock Fuse

Remove the stock fuse from the vehicle’s fuse panel and insert into the open fuse socket of the Mini Expandable Circuit.

Insert the Expandable Circuit

Insert the Mini Expandable Circuit into the location on the vehicle fuse panel from which you just removed the stock fuse.

• PACKAGE INCLUDE - ① MuHize 3x Low profile mini fuse adapter with 5 Amp low profile mini blade fuses; ② MuHize 3x Mini fuse adapter with 15 Amp mini blade fuses; ③ MuHize 3x Standard fuse adapter with 5 Amp standard blade fuses; ④ MuHize 3x Mirco2 fuse adapter with 5 Amp standard blade fuses.
• DUAL-SLOT FUSE HOLDER - It provides one fuse holder to protect original circuit and provides a lead with the second fuse holder for new circuit.
• EASY TO USE - Plug into an existing fuse holder. Easy to install the additional circuits without splicing or cutting.
• WIDELY APPLICATION - MuHize assorted add a circuit Fuse Tap Adapter kit commonly fits for mini blade fuses (rating 1Amp-30Amp), Perfect for car alarm, cell phone charger, GPS, DVD player, dash cam, etc
• HIGH QUALITY - 100% brand new & made from excellent materials, good electrical conductivity, and melting resistance.

Product features

MuHize 12 PCS Circuit Fuse Tap ATC ATS Mini Mirco2 Adapter Holder Assortment Kit

This listing features 12 pieces of Brand New Add-A-Circuit Mini fuse holders with heavy duty 16 gauge red color wire and 12 pieces of 5 AMP 3 Type Blade Fuses.

• Type: Low Profile Mini & Mini & Standard & Mirco2 Add-a-circuit blade fuse holder;
• Cable Type: Heavy duty 16 gauge red color wire;
• Support Fuse: blade fuse. (rating 1Amp-30Amp);
• 100% brand new & high quality
• Compatible with 12/24v vehicle electrical systems
• Easy to add a fuse to protect car alarm, dash cam,DVD player, GPS, Cell phone charger, etc.
• Fits for Most Vehicles (such as cars, trucks, SUVs, 4X4, boats and RVs), Car Electronic Device (eg: Dashboard camera, radar detector, GPS, car recorder, car alarm, radio, DVD player and other electronic devices.),Boat (for adding LED strip, DVD player, GPS, radio and other electronic), GPS and Circuit Diagram, etc

Specifications:

Package Include:

• 3 x Low profile mini fuse adapter with 5 Amp low profile mini blade fuse
• 3 x Mini fuse adapter with 5 Amp mini blade fuse
• 3 x Standard fuse adapter with 5 Amp standard blade fuse
• 3 x Mirco2 fuse adapter with 5 Amp mirco2 blade fuse

How tio Use:

• 1. Just crimp a fuse tap on the end of wire;
• 2. Plug and play at the fuse box. 3pcs

WHY CHOOSE US?

WHY CHOOSE OUR "MuHize" BRAND?

MuHize specializes in designing and supplying automotive parts, providing high quality products and excellent service.

You can buy the products you need more favorable than your local retail outlet. We continue to improve our products based on customer review and feedback.

Product description

PACKAGE INCLUDE: 3 x Add-a-circuit Fuse Holder

• DUAL-SLOT FUSE HOLDER: Provides one fuse holder to protect existing circuit and a second fuse holder to protect new circuit
• EASY TO USE: Plugs into occupied or vacant energized fuse block slot. Easy installation of additional circuits without splicing or cutting
• VERSATILITY: Use when hardwiring or adding LED strips, dash cams or other electronic devices that require direct wiring into the fuse box
• SUPERIOR QUALITY: Made from high quality materials, good bending performance, melting resistance and excellent electrical conductivity
• PACKAGE INCLUDE: 3 x Add-a-circuit Fuse Holder

User questions & answers

Question:	where holder do I use for original circuit and which for new dash cam circuit
Answer:	DO NOT GO OVER 10 AMPS MAX !!! THE RED WIRE WILL EASILY BURN BEFORE THE 20 amp FUSE BLOWS, YOU COULD BURN YOUR ENTIRE CAE UP !! You can go down in amps BUT DON'T UP IN AMPS PAST 10 AMPS OK !!
Question:	I added a circle to 10a circle. the new circle is 5a. do i need to increase the existing circle 10a to 15a? or they are separated
Answer:	Red wire for your camera may be continuous power or Ignition power only you wiring schematics will tell you this.as far as your ground black wire verify that it is a ground and most likly can be connected to your battery ground or a good chassis ground.
Question:	If the original fuse was a 5amp and the new fuse was 10amp is that an issue? Do they have to be matched
Answer:	Actually, the limiting factor is the wire gauge feeding into the fuse block. If you are pulling out a 25 amp fuse, and then adding another circuit fused at 25 amps, the original wiring into the backside of the fuse block isn't heavy enough to support a 50 amp load.
Question:	I added a circle to 10a circle. the new circle is 5a. do i need to increase the existing circle 10a to 15a? or they are separated
Answer:	Pet food safe

Product description

Show Chrome Accessories now offers a Plug N’ Go Electronic Fuse Block for the 2018 and newer Goldwing. Designed with eleven terminal tie in points which are electronically protected by nine separate relays and fuses. Includes: turn signal,  running lights, brake light, always on and keyed connection points. The Goldwing’s electrical system is protected by a 20 amp fuse and separate 30 amp relay to isolate all your electrical accessories from the Goldwing’s electrical system.  Comes with two sub harnesses with OEM connectors for seamless connectivity. This is a must have accessory when adding electrical accessories to the 2018 and newer GL1800 Goldwing.

• package height : 19.7 cm
• package length : 8.3 cm
• package width : 11.0 cm
• Product type : AUTO ACCESSORY

• 100 assorted 3A/5A/7.5A/10A/15A/20A/25A/30A/35A/40A Blade Fuses commonly used for most auto.
• Protect your car and your electrical device from short circuit, overload etc
• 32V voltage rating, fast-acting, blade-mounting, designed for car, truck, taxi, SUV, boat, general DC applications etc.
• Size: 19x5x18.5mm, Material:Zn alloy/Plastic.
• ROHS compliant.

User questions & answers

Question:	Has anyone actually tested these to verify that they actually blow at the specified amperage? Low-cost sometimes means poor quality control
Answer:	Mini fuse is 1999 and older,Check your fuse box if the fuse is about the size of a dime with two probes along the sides its a micro fuse if it's thin a skinny with two probes coming out its a micro 2 which is most common in cars after 2013
Question:	I cannot read the numbers printed. Could someone please tell me what color is what amp
Answer:	Look at your manual first, it wont work on "all cars" as some people would think. It only works on fuse boxes that use "Mini-Fuses."
Question:	Do these have the white printed numbers on the front of the fuse for identification
Answer:	1) locate your interior fuse box (under dash/steering wheel)2) find your radio fuse (you can do something else, but this seemed the best option for me)3) pull that fuse and insert it into the slot on your mini expandable circuit (along with the 3amp fuse included in the kit. Mine was missing the 3 amp fuse so I bought a 5amp at autozone and it works just fine)4) connect the power wire from the light kit to your mini circuit and crimp the quick connector.5) make sure your ground wire from the light kit is connected to a suitable ground. (I have a ground cluster just behind my brake pedal under the carpet in my tiburon. Check there or in your driver side kick panel)6) plug the mini circuit into the radio fuse spot in your interior fuse box.Now you have power to your lights any time your radio would normally have power!
Question:	How is the quality of this Automotive fuses? Is it qualified
Answer:	Not really. This is a tap for use in an automotive fuse box. Use an inline version instead. For example: https://www.amazon.com/dp/B07KSWNRDC/ref=cm_sw_em_r_mt_dp_U_QK1rEbS7DZH64

• Size: 0.75*0.74*0.2 in, Material:Zn alloy/Plastic.
• Clear Identification, Amp numbers carved on the blade fuse for easy recognition.
• Function: Protect your car and your electrical device from shorting circuit and overloading when occuring to unstable vols / suddenly high amps.
• Auto fuses assortment kit are suitable for most of vehicles like Cars, Truck, SUV, ATV, UTV, Camper RV, Motorcycles and etc.
• Package included: 130pcs car fuses. 1A 2A 3A 4A 5A 7.5A 10A 15A 20A 25A 30A 35A 40A, 10pcs each; 1pcs fuse puller, 1 pcs storage box.

User questions & answers

Question:	Are these only for cara
Answer:	You should add this new circuit so that the new fuse feeds from the hot bus so that there would be no need to change your 10 amp fuse (it is not safe to change the existing fuse to a larger one). Just DO NOT take your feed off the 10 amp fused side - use the bus to feed it. If you are not sure, talk to the vendor for clarification and safety. Mike
Question:	are these all ATC type fuses
Answer:	You need to use the fuse that you removed from the space or one of the same rating, it does not have the wire at its end. That way you will keep that circuit as it was, then you will need to use a fuse that is called for in your new circuit
Question:	Whats the difference between a 35a ato fuse and a 40a fuse? because with my electric scooter trying to pull voltage, the fuse keeps blowing.mine is
Answer:	The bottom port you put the fuse took out of the fuse port in the fuse box. The top port on the add a fuse you put the correct amperage fuse you need for your device. The top and bottom ate seperate curcuits.
Question:	Is each fuse marked with its amp rating
Answer:	http://www.ledunderbody.com provides great support. Check out your manual and it will tell you where the box is located and the fuse sizes and ratings. You simply remove a fuse that's in use and plug it into the Expandable Circuit(EC) then plug the EC back into your fuse box.

Product features

How to replace auto fusesAPR / ATC / ATO / ATS Standard blade fuses

How to Test and Replace a Car Fuse: Fuse boxes come with a fuse puller. You could remove and install fuses with puller. Remove the fuse and hold it up to the light. The small filament should be continuous from one side to the other. If the filament is melted, it means that something overheated the circuit. If in doubt, use a multi-meter to check for continuity across the two terminals. If the fuse has burned out, simply insert a new fuse of the proper amperage rating in the slot.

How To Identify Your Vehicle's Fuse Type and identify the one you need

The different types of fuses are listed for reference to avoid to buy the wrong fuse. (Notes: The fuses we sell is Regular blade type fuses)

Each fuse is printed with the rated current in amperes on the top.These types of fuses come in six different physical dimensions:

• Micro2.
• Micro3.
• LP-mini (APS), also known as low-profile mini.Unofficially, the "low-profile mini" fuse is sometimes incorrectly called "Micro" since the term means smaller than mini, but recently fuses using the Micro name have been released.
• Mini (APM / ATM). The mini fuses were developed in the 1990s.
• Regular (APR / ATC / ATO / ATS) blade-type fuses, also known as standard, were developed in 1976 as ATO by Littelfuse[1] for low voltage use in motor vehicles. Bussmann makes the ATC[2] that also complies with the same ISO 8820-3 and SAE J1284 standards. The "C" and "O" don't refer to closed/open.
• Maxi (APX), heavy-duty.

Product description

Nilight high-quality 14 AWG in-line blade ATC/ATO standard fuse holders type: ATO/ATC fuse holder cable type: 14 AWG loop length: 12 inches certification: UL in-line ATO/ATC fuse holder with cover for blade fuses fit for fuse dimension: 19. 1 x 18. 1 x 5. 1 mm support fuse: ATC/ATO blade fuse of 0. 5A, 1A, 2A, 3A, 4A, 5A, 7. 5A, 10A, 15A, 20A it features a water resistant cap and a loop 14-gauge insulated wire. Great look and added protection to any system removable waterproof cover, damp proof and waterproof, protects from dirt and road splash works on cars, boats, RV's and more (DC current 12V) easy installation on All kinds of vehicles-cars, Jeeps, ATVs, UTVs, SUVs, 4X4, motorcycles, trucks, boats, RVs.

• SAFETY PROTECTION: Heavy duty 14 gauge (AWG) red color wire, great look and added protection to the circuit
• SUITABLE FUSES: Fits for 1A, 2A, 3A, 4A, 5A, 7. 5A, 10A, 15A, 20A, 25A, 30A ATC/ATO blade fuse of 19. 1 × 18. 5 × 5. 1 mm
• WATER RESISTANCE: Tight-fitting waterproof lid, great damp-proof and waterproof performance, this item is safe and reliable
• PREMIUM QUALITY: High-quality materials ensure good bending performance, melting resistance and excellent electrical conductivity
• PACKAGE INCLUDE: 10 x 14AWG ATC/ATO Inline Fuse Holder

User questions & answers

Question:	Does this work with ATC fuses
Answer:	Yes, it is a match for both the ATC and ATO fuses.
Question:	What is the wire gauge of the fuse holder
Answer:	14 Gauge, just as it says in the description!
Question:	How to tell 100% sure if corroded inline fuse (toyota aftermarket foglamps) is 14- or 16-awg? wirestripper seems imprecise way to measure
Answer:	FLowWOOLF NATURALS, It is hard to tell what gauge the wires are, yep, wire strippers are not a good means for sure. I usually have a small piece of different gauge wire handy like these sizes and I just compare my known sizes to the size am working with. 14 gauge is fairly big but good to use if you have incandescent fog lights, these usually pull a lot of amps, if LED's don't worry using 16 gauge., just make sure you have the positive/negative leads correct. Anyway you can't go wrong using a little heavier gauge wire on most everything you're wiring. I've had very good luck using these fuse holders and the caps keep the dampness out. I have them on my lawn mowers, ATV, car, van and on my DC emergency lights in the house and garage 0¿0 AND, you can solder the leads and insulate them with heat shrink !! Better to have a blown fuse than burnt equipment or house 0¿0 So, just cut out the old fuse and wire in one of these new ones.
Question:	Do these fuse holders come with fuses
Answer:	No, they don't come with fuses

Product features

Specifications:

Type: In-line ATO/ATC fuse holder.

Cable Type: 14 AWG.

Loop Length: 12 inches.

Fit for fuse dimension: 19.1 × 18.5 × 5.1 mm.

Fit Fuse: ATC/ATO blade fuse of 1A, 2A, 3A, 4A, 5A, 7.5A, 10A, 15A, 20A, 25A, 30A.

It features a water resistant cap and a loop 14-gauge insulated wire.

Premium wire

Made from high quality materials, good bending performance, melting resistance and excellent electrical conductivity

Water-resistant Lid

Specially designed cap for tight sealing, efficiently prevent water and dust from entering, upgrading waterproof performance.

Easy Installation

Cut this looped wire about in the middle first, one of the ends connect to your power source, the other to the accessory power wire that you are attempting to power.

Excellent Product

With durable rubber cap, heavy duty wire and long enough wire length, this in-line fuse holder is a really good choice for you.

Product description

Feature:



Made of High Quality Sturdy Thermoplastic ABS Material



Enlarge Available Space of the Original Storage Armrest Box



Help to Organize Your Objects such as coins, document, smartphone, etc.



Upgrades the interior of your car with unique style.



Direct Replacement. Easy Installation

Fitment: (for LHD models only)



2013-2021 Subaru XV/Crosstrek



2013-2021 Subaru Forester



2010-2014 Subaru Outback (Not Fit 2015 onwards)



2010-2014 Subaru Legacy



2012-2021 Subaru Impreza (Gj, GP Series, previous shape only)



2015-2021 Subaru WRX STI



2019-2021 Subaru Ascent

Condition: 100% Brand New



Package includes: 1X Subaru Fuse Box Coin Container



Size: (As the picture shown)



» Length: 4 1/2" (11.3cm)



» Width: 4 1/4" (10.8cm)



Color: Black



Material: High Quality ABS



Weight: 80g

• [HIGH QUALITY]：Made from odorless ABS plastic with a matte finish, making it tough enough to withstand the impact of your driving on the road.
• [FIT PERFECTLY]: Fit for 2013-2021 Subaru XV/Crosstrek / 2013-2021 Subaru Forester / 2010-2014 Subaru Legacy / 2012-2021 Subaru Impreza (Gj, GP Series, previous shape only) / 2015-2021 Subaru WRX /2015-2021 Subaru WRX STI / 2019-2021 Subaru Ascent/ 2010-2014 2020-2021 Subaru Outback (Not Fit 2015 onwards)
• [Non-slip Design]: The bottoms of the organizer are lined with a non-slip rubber which keeps things from sliding around and rattling in tray.
• [Organized]: From fuse cover you can change to a small storage box that can store items such as coins, document, card, headset, etc.
• [Package include]:1X Subaru Fuse Box Coin Container,1X non-slip,10X fuse guide stickers.

User questions & answers

Question:	will this work in a 2121 chevy trailblazer
Answer:	Wish I could help. I have the same problem. I am just replacing color for color. A simple chart in the box would help.
Question:	I have ordered 2 of your fuse box/coin holder doors. i received one and the other is on the way. please send a “sj” fuse diagram that was not inc
Answer:	They have numbers in a raised emboss, but they are not painted. Not the easiest to read, but can be done.
Question:	Can i get the sj fuse diagram? it was not included with mine for my 2021 subaru forrester fuse box coin container
Answer:	There is no problem with the quality of this Automotive fuses ROHS compliant.
Question:	Will this fit a 21 subaru outback? chart says no but amazon says it will fit my car. will it fit
Answer:	Your new circuit will line up with wire

Product description

Audiobank BCC4AR Complete 4 Gauge 3000 Watts Car Amplifier Installation Power Amp Wiring Kit Inline AGU Fuse Holder & 80A Fuse and All the Accessories / Terminal Included Red

Product Highlights:

Our Audiobank Copper Aluminum series cable was designed specifically to be larger than the competition. Copper Clad Aluminum is less conductive than Oxygen Free Copper when comparing like sized conductors. CCA however is also much less expensive. So by increasing the area in our cable, Audiobank was able to achieve similar performance to OFC, but without the higher cost. For this exact reason is why our cable is larger, to achieve similar performance, for less money. The graph below shows, based on area, our cable is at least 40% larger than comparable brands. The New 4 Gauge AudioBank Amp Kit has a little bit of everything and provides great power and durability for all of your car audio installation needs! The package includes bendable cables that allow you to maneuver through tight spots, a turn on wire, several terminals, and much, much more. If you're looking for a quality buy at a great price, this is it!

Package Contents:

1x AUDIOBANK BCC4AR- Blue3000Watts

• Audiobank 4 Gauge 3000 Watts Red Amp Kit with High Quality Thick 17 Feet FT 4 Gauge GA Power Cable
• Premium 3 Feet FT 4 Gauge GA Ground Cable / Inline AGU Fuse Holder & 80A Fuse Included!
• True Sound 17 Feet FT Double Shielded RCA Cable
• High Quality 17 Feet FT / 18 GA Turn-On Cable & 20 Feet FT / 16 GA Speaker Wire
• Perfect for Any Installer Shop! Great for Car / Truck / Motorcycle / RV / ATV

Product description

Plugs into occupied or vacant energized fuse block slot. Protects original circuit and provides lead for a new circuit for mini fuses include fuse 2. This high quality Add a circuit/fuse Kit allows easy installation of additional circuits without cutting or spicing. 3. Turn one fuse slot into two while providing protection for both circuits. 4. This Dual slot add-a-circuit/add-a-line/fuse plug provides a fuse slot for the existing OEM circuit and a second slot for a new circuit for a mobile electronic devices/accessories such as a mobile phone, radio, mobile accessories, etc.

• Dual-slot fuse holder: provides one fuse holder to protect existing circuit and a second fuse holder to protect new circuit
• Easy to use: plugs into Occupied or vacant energized fuse block slot. Easy installation of additional circuits without splicing or cutting
• Versatility: Use when hardwiring or adding LED strips, dash cams or other electronic devices that require direct wiring into the fuse box
• Superior quality: made from high quality materials, good bending performance, melting resistance and excellent electrical conductivity
• Package include: 10 x Add-A-Circuit fuse holder, 10 x 15A fuse

User questions & answers

Question:	If I use this will it give me direct power all the time or do I have to have the key on it
Answer:	Yes, look at the second line of the description 130PCS Standard Blade Car Fuse Assortment, SIM&NAT 1A 2A 3A 4A 5A 7.5A 10A 15A 20A 25A 30A 35A 40A Auto Medium Blade Fuses Kit - ATC/APR/ATO/ATS Automotive Fuse Assortment
Question:	Can this work with 2015 ram
Answer:	Sounds like there is another issue causing your fuse to blow. Something may be shorting such as a ripped wire rubbing on metal causing it to blow your fuse. But you can put 40a fuse in. Just a matter of time till that one blows. ATO fuse is just a regular large automotive fuse. ATC fuse is just a fuse thats protected against moisture, corrosion or damage.
Question:	What gauge bullet fits the blue end
Answer:	yes, amps and volts
Question:	Will this work with a 2014 Mercedes E class
Answer:	China do I need to say more toss then I did

Product features

Specifications:

Type: Add-a-circuit blade fuse holder.

Cable Type: 16 AWG.

Wire Length: 6 inch.

Support Fuse: Mini ATM APM blade fuse.

Includes 15A Mini ATM APM blade fuse and butt splice connector.

Circuit Protection

This dual-slot add-a-circuit fuse holder provides a fuse slot for the existing OEM circuit and a second slot with a 15A blade fuse for a new circuit.

Superior Quality

Made of high quality nylon plastic, anti-wear and anti-corrosion, very sturdy and durable; thermoplastic-insulated wire is high temperature and melting resistant.

Convenient to Use

This high quality add a circuit fuse kit allows easy installation of additional circuits. No spicing or wire cutting necessary. Just plug it into fuse block slot.

Premium Wire

Made from high quality materials, good bending performance, melting resistance and excellent electrical conductivity

Car Electronic Device

Adding a new circuit for dashboard camera, radar detector, GPS, car recorder, car alarm, radio, DVD player and other electronic devices.

Fits for Most Vehicles

This add-a-circuit blade fuse holder can be widely used for most kinds of vehicles, such as cars, trucks, Jeeps, SUVs, 4X4, boats and RVs.

Use on Boat

Can be used for adding LED strip, DVD player, GPS, radio and other electronic that requires direct wiring into the fuse box without cutting or splicing.