11 best audio inverters
It's possible that you may be referring to a specialized or less commonly used term in the context of automotive or electrical components.
However, we can provide some general information about inverters:
An inverter is an electronic device that converts direct current (DC) power into alternating current (AC) power.This conversion is commonly used in various applications, including powering household appliances, electronics, and automotive devices when an AC power source is not available. Inverters are often used with batteries or other DC power sources to provide AC power for running devices that require it.
Below you can find our editor's choice of the best audio inverters on the marketProduct description
80A 100A 200A Circuit Breaker Trolling Motor Auto Car Marine Boat Bike Stereo Audio Inline Fuse Holder Inverter
Specification:
Material: Plastic and metal
Voltage: 12-42V DC
Current: 80/100/200 Amp
Suit gauge wire: 0 - 4 AWG
Operating Temperature: -10C to 50C (-14F to 122F)
Size: 3.34in (L) x 1.77in (W) x 2.75in (H)
Instructions:
-Can be mounted on circuit of vehicle-mounted speaker or other electric appliance.
-No need to disassemble or install insurance core when break down. Just switch on or off the device.
Functions:
-For car audio/video system overlord protection
-Stops power surges from damaging your amps.
Features: -Mount on Panel or Firewall.
-No fuse change trouble & headache
-Easy to operate with manual reset arm
-Unique Push Button Reset can also be used as a Kill Switch.
-High Tech water resistant housing.
-Self-Testing & Manual Override
Package include:
1x Circuit Breaker Car Audio Inline Fuse
- Built-in High Current Terminal Blocks,Stops Power Surges From Damaging Your Amps,Save Your Money To Replacing Fuses
- New Design Manual Reset Circuit Breaker 80A-250A For Choose And Compatible With All 12,24 Volt Systems,Protects Your Trolling Motor From Electrical Damage
- Mount On Panel Or Firewall Unique Push Button Reset High Current Low Voltage Overload Protection Circuit Breaker Unique Push Button Reset Can Also Be Used As A Kill Switch
- Suitable for car audio/video system, Boat, trucks, buses, RV's, ATV Winches and marine and DC sound amplifier system overload protection.
- 100% Brand New,High Current Circuit Breaker
User questions & answers
Question: | Wire size. it says 0-4 gauge, do they mean 0-4/0? 300 amps would be a 2/0-4/0 wire usually |
Answer: | Yes, it should only interrupt the frequency you select to use it on |
Question: | For manual switching, is it a push red button to open, twist blue lever to close or the reverse |
Answer: | At least I think it is safe |
Product description
Description
♦ Ampere range: 150A
♦ High Current Circuit Breaker
♦ Current: 1A-150A
♦ Voltage: 12V-24V DC
♦ For car, boat, marine, bike use, etc.
♦ Stops Power Surges from Damaging Your Amps
♦ Mount on Panel or Firewall
♦ Unique Push Button Reset can also be used as a Kill Switch
♦ High Tech water resistant housing
♦ RUBBER BOOTS FOR WATER PROTECTION
♦ No More Spending Money on Replacing Fuses
♦ Replaces the AGU Style Fuseholder
Specifications:
- 2 modes: Close/Off
- 6mm/7.6mm screw
- Material: Plastic and Metal
- Dimention: 98mm (L) x 43mm (W) x 35mm (H)
- Net weight: 100 g
Introduction:
√Easy to use and durable, Use in place of an inline fuse holder
√Prevent excessive current, protect the electrical appliance
√Brand new ,made with high quality parts, apply in connecting audio power line
√No More Spending Money on Replacing Fuses
√Unique Push Button Reset can also be used as a Kill Switch
Package included
1x 12V-24V 150A DC Auto Audio Circuit Breaker Reset Fuseholder
- Ampere Range: 150 Amp Car Audio Inline Circuit Breaker/Disconnect Fuse Holder 12V-24V DC
- Manual Reset: Visible reset lever shows open condition, unique push button reset can also be used as a kill switch. Button on circuit breaker can act as a master disconnect for circuits
- Protection: Prevents excessive current and overload protection for Amps, Audio electronics, audio/video systems and accessories in car, boat, marine vehicles and bikesstops power surges from damaging your amps. Mount on panel or firewall
- Application: Typically used in auxiliary and accessory circuits for trucks, buses, RV's, ATV Winches and marine applications. Also used in battery charges and DC sound amplifier system
- Warranty: 1 Year warranty, anything pls contact us advance, we are here resolve it for you
User questions & answers
Question: | I will mounting this device in my boats engine comparment. Is this device explosion proof |
Answer: | Dear Customers,Thank you for your question! Please review our follow-ups.Sorry, this fm transmitter does'nt serve as a wifi.If you have any further questions, please feel free to contact us via Amazon email or email us at [email protected], we will follow up your issue or question within 12 hours.AlexToHayie US team |
Question: | When inserting the wire, should the red lever be in line or open |
Answer: | Dear Billy,Thank you for your question! Please review our follow-ups.Yes, this fm transmitter has a built-in microphone, and the voice plays through your car system. Hands-free phone call is priority over all options. If you have any further questions, please feel free to contact us via Amazon email or email us at [email protected], we will follow up your issue or question within 12 hours.AlexToHayie US team |
Question: | Can i use 4 gauge wire |
Answer: | Dear Customers,First, your cell phone must pair with this transmitter. Answer a call: When there is an incoming call, LCD will display incoming call, press the "Play" button to pick up the call, press the "Play" button again to hung up the call. If you have any further questions, please feel free to contact us via Amazon email or email us at [email protected],we will follow up your issue or question within 12 hours.AlexToHayie US team |
Question: | What gauge wire will this work with |
Answer: | does this fit a 1999 chevy suburban k1500 LT 5.7 v8 |
Product description
Ampere range: 100A
Voltage: 12V-24V DC
Size: 98mm (L) x 43mm (W) x 35mm (H)
For car, boat, marine, bike audio/video system overload protection
Stops Power Surges from Damaging Your Amps
Mount on Panel or Firewall
No More Spending Money on Replacing Fuses
Easy to operate with manual reset arm
No fuse change trouble
Package included:
1x 12V-24V 100A DC Auto Audio Circuit Breaker Reset Fuse holder
- ★Brand new, made with high quality parts.Easy to use and durable
- ★Function: prevent excessive current, protect the electrical appliance.Suitable for car audio/video system overload protection
- ★Apply in connecting audio power line
- ★Unique push button reset can also be used as a Kill Switch, high tech water resistant housing
- ★Use in place of an inline fuse holder
User questions & answers
Question: | Will this fit 0 gauge wire |
Answer: | Yes, this will act as an aide to prolong the life of the ceramic coating and also serve as an additional "top coat" |
Question: | Is 500 rms amp ok to use with this 100 amp breaker |
Answer: | Ceramic lasts much longer. Spray wax is only for protection between washes |
Question: | If I put this on my power wire coming from my battery to my 1000 watt amp, will it kill all the power going to the amp when i switch it off |
Answer: | It hasn't stained mine. I use it on all my car's exterior surfaces. |
Question: | Can this handle sustained current near 100A @24V w/o tripping |
Answer: | it comes with the auxillary cable |
Product description
Specification:
1.Net weight: 193g
2.Voltage: 12-24V DC
3.Size: 2.63in (L) x 1.96in (W) x 1.37in (H)
3.Material: Plastic and metal
5. Suit gauge wire: 0-4 AWG
6. Work Temperature: -10C to 50C (-14F to 122F).
7. Current load VS time tripping: 100% VS 20-180s; 150% VS 6-40s; 200% 4-25s
Application:
Suitable for car audio/video system, Boat, trucks, buses, RV's, ATV Winches and marine and DC sound amplifier system overload protection.
Please Note:
1. Please correctly push the button to avoid damage the Circuit Breaker.
2. Please order and use the Circuit Breaker with right work temperature, to avoid it is too heat and stop work.
Package include:
1x 200A Circuit Breaker Car Audio Inline Fuse
- Power Rating: 200 ampere Manual Reset Circuit Breaker
- Accepts direct connection of 0/2/4/8 gauge power wire with included adapters with all 12, 24 Volt Systems
- Use as an alternative to fuse holders and fuses,High-tech water resistant housing with protective rubber bolt caps
- Stops Power Surges From Damaging Your Amps ,Protects Your Trolling Motor From Electrical Damage
- These panel or fire wall mount circuit breakers feature a unique push button reset which can also be used as a kill switch,if you have any question, pls contact with us first
User questions & answers
Question: | is it suitable for 48v battery bank |
Answer: | No. You use this in place of sealant. Order goes as follows..1. Wash/dry 2. Clay bar speed shine 3. Polish 4. Ceramic |
- Manual Reset circuit breaker 150A: Red manual reset button, rubber boots for water protection, compatible with all 12V/24VSystems
- Function: prevent excessive current, protect the electrical appliance. Work Temperature: -10℃ to 50℃ (-14F to 122F).
- Application: Typically used in solar system, battery charges, inverter, Car audio video system, boat, marine, bike use,RV and DC sound amplifier system.
- Brand new ,made with high quality parts, apply in connecting audio power line
- Easy to use and durable, mount on panel or firewall. Save Your Money to Replacing inline fuse holder
User questions & answers
Question: | Can i use this on a 48v electric bike battery |
Answer: | Don’t know the answer to that. Sorry |
Question: | is a par or only one |
Answer: | I don't recommend doing it that way , you can purchase a foam cannon for about 10$ which works well. Most power washer soap containers say for piwerwashers only . |
Question: | Well these breakers work for double batteries in a car |
Answer: | It will work great in a foam cannon. I've used it with a pressure washer and it left foam like shaving cream.. I do use a nice foam cannon bought on Amazon for like 16 or 17 bucks.. |
Question: | Can i use this as on off switch |
Answer: | Good question, I'm not sure if it is,but you can call them at 800-345-5789.(I buy a lot of their products) |
Question: | Do you have a cover? I keep triggering it while packing the vehicle for transport |
Answer: | I’m thinking your asking about applying wax over Griot’s Poly Wax? Don’t! This product is easy to apply. Once you apply it wait 10-20 minutes then wipe off with a micro fiber cloth. That’s all. This product produces a finish with a very high gloss. I received a compliment from someone who thought my four year old car was new. |
Question: | Do you have a 250a |
Answer: | In my opinion a good wax is a sealant. Normally you use a polish to remove scratches, swirls and oxidized paint and then you seal it with a good quality wax to protect the surface. |
Question: | will 2/0 awg wire fit |
Answer: | Nope, but unless the paint job on your car is SPECTACULAR and flawless it wouldn't hurt and would only make this wax POP even more on your car after it was applied!!! |
Question: | Will it fit 4 gauge wire |
Answer: | Mine did not come with either. Only the wax was included in my order. |
Product description
Circuit Breaker Trolling Motor Auto Car Marine Boat Bike Stereo Audio Inline Fuse Holders Inverter
Specification: 1.Net weight: 193g
2.Voltage: 12-24V DC
3.Size: 2.63in (L) x 1.96in (W) x 1.37in (H)
4.Material: Plastic and metal
5. Suit gauge wire: 0GA/4GA
6. Work Temperature: -10C to 50C (-14F to 122F).
7.Easy Installation, Manual Reset Circuit Breaker
- KUMEED 80A -150A Manual Reset Circuit Breaker Inline Fuse Holders Inverter Compatible with all 12-24 Volt Systems
- Stops Power Surges From Damaging Your Amps ,Protects Your Trolling Motor From Electrical Damage
- Mount on Panel or Firewall Unique Push Button Reset can also be used as a Kill Switch
- Unique Push Button Reset and Save Your Money to Replacing Fuses
User questions & answers
Question: | water proof |
Answer: | I am not sure but don't see why not .. it is a covering on top of the lacquer -- apply without a lot of pressure to be safe and it should be fine |
Question: | what is the largest gauge cable I can use |
Answer: | It can be used on chrome or any other smooth, hard surface, such as vinyl wrapped door pillars or vinyl wrapped car. It cannot be used on any matte or textured surface such as rubber or textured vinyl tops, and is not advisable on bare urethane parts like door trim. Any wax will leave behind a residue on a textured surface. From what has been said by others, this wax dries very hard, so it would be a very bad idea to get on rubber or textured vinyl anything. If you want to use a product that leaves behind no white or chalky residue, like on and around emblems, then I would suggest Opti seal. |
Question: | Do they make one like this in 125 amp, that will accept a 1/0 wire |
Answer: | It left some white residues among margins, in my case i have a dark gray vehicle so you will notice very easily, but i can be removed really fast an easy. This wax leave an incredibly shine on your vehicle that las for a 5-6 weeks, i live in the caribbean and i'm more than satisfied with this wax. |
Question: | It says in-and-out would that be power in and power out? or does it matter |
Answer: | I don’t think it has any real fragrance. Used this weekend and didn’t notice anything. |
Product description
ZOOKOTO 300Amp Circuit Breaker Fuse holder, Trolling Motor Auto Car Marine Boat Bike Stereo Audio Inline Fuse Inverter with Manual Reset 12V-24V DC (300A)
Description:
High Current Circuit Breaker,4GA Gold Plated Inputs
Size: 80mm (L) x 52mm (W) x 40mm (H)
Works with 12-24v DC
Stops Power Surges from Damaging Your Amps
Mount on Panel or Firewall
Unique Push Button Reset can also be used as a Kill Switch
High Tech water resistant housing
RUBBER BOOTS FOR WATER PROTECTION
No More Spending Money on Replacing Fuses
Any question, pls contact with us
Package included: 1x 12V-24V DC Waterproof Circuit Breaker Reset Fuse Holder 300A
- Waterproof resistant Circuit Breaker 300A.
- Size:300 Amp, Compatible with all 12-24 Volt Systems, 4 Gauge Gold Plated Inputs.
- Stops Power Surges From Damaging Your Amps ,Protects Your Trolling Motor From Electrical Damage.
- Mount on Panel or Firewall Unique Push Button Reset can also be used as a Kill Switch.
- Unique Push Button Reset and Save Your Money to Replacing Fuses.
User questions & answers
Question: | What is the maximum distance this can be installed from the positive battery terminal |
Answer: | I use this product in between soap and water washes, and it works great. Use a soft micro-fiber cloth to apply, and it should not scratch your paint. |
Question: | What size are the input and output terminals |
Answer: | Great product |
Question: | Is it waterproof or just water resistant |
Answer: | Since I use this from a pressurized spray bottle, I assume that I am spraying about one ounce.A gallon equals 128 ounces, therefore, I should get around 100 washes. Give or take - YMMV |
Question: | What size diameter are the terminal studs on the 80A breaker |
Answer: | 11146 is Speed Shine- (used on a clean or dusty car) 11065 is Waterless Car Wash ( clean car) As a customer, both are fine products. Just FYI |
Product description
Product Specification:
Material: Plastic and metal
Current: 125A
Voltage: 12-24V DC
Net weight: 84g
Suit gauge wire: 5-15 AWG
Connection way: Any side for positive, another is negative
Size: 3.94in (L) x 1.65in (W) x1.77in (H)
Features:
Manual open circuit push button.
Easy to operate with manual reset arm.
Rubber Boots for water protection
Can be mounted on panel or firewall.
Stops Power Surges from Damaging Your Amps
Replaces the AGU Style Fuseholder
Package include: 2 x 125A Auto Circuit Breaker Inline Reset Fuse holder"
- Ampere Range : 125 Amp Car Audio Inline Circuit Breaker/Disconnect Fuse Holder 12V-24V DC
- Material : Plastic and metal
- Stops Power Surges From Damaging Your Amps ,Protects Your Trolling Motor From Electrical Damage
- Easy to use and durable, mount on panel or firewall. Save Your Money to Replacing inline fuse holder
- Unique Push Button Reset and Save Your Money to Replacing Fuses
Product description
Description
This high current circuit breaker works with cars, boats, RV's and morewhich can stops power surges from damaging your amps. It is manufactured to rigorous specifications and with the utmost attention to detail for uncompromising quality, and iseasy and safe to use and install with long service life.
Features
- Color: Shown in the pictures.
- Material: Metal and Plastic.
- Size: Approx. 10 x 4.2 x 4cm/ 4 x 1.65 x 1.6 inch (LxWxH).
- Current: 15A.
- Prevent excessive current, protect the electrical appliance.
- Great safety and commonly work on cars, boats, RV's and more (DC current 12/24/32V).- Simple reset switch and test button with gold plated contact.
- Fits upto a 4 Gauge Wire (8mm max).
Package Including
1 x 15 Amp In-Line Circuit Breaker Stereo-Audio Car RV 15A Fuse 12V/24V/32V
- Prevent excessive current, protect the electrical appliance.Suitable for car audio/video system overload protection. Mount on panel or firewall.
- Unique push button reset can also be used as a kill switch. No more spending money on replacing fuses.
- Simple reset switch and test button with gold plated contact.Replaces the AGU style fuseholder
- Fits upto a 4 Gauge Wire (8mm max).
- Typically used in auxiliary and accessory circuits for trucks, buses, RV's, ATV Winches and marine applications. Also used in battery charges and DC sound amplifier system
User questions & answers
Question: | What about solar - where this breaker would receive about 80vdc @ 9amps constant for ~12hrs/day |
Answer: | this is used to convert l/r speaker channels to rca outputs, when no rca line is available (like from a factory car stereo without subwoofer out lines). it has to have a reciever signal to convert. i used it to hook my home stereo up to a car amp and subwoofer. i also had to convert the 120v ac power from the wall to 12v dc power. |
Question: | Is this marine grade for marine amp on boat in salt water area. bluetooth amp calls for 15 amp fuse and i'm running 8 gauge wire. sugestions? thx |
Answer: | this is used to convert left and right stereo signal to rca plugs. they can be used if you are adding an amp to a vehicle with no pre amp outputs on the stereo. |
Product description
Description:
√ Prevents excessive current and overload protection for Amps, Audio electronics, audio/video systems and accessories in car, boat, marine vehicles and bikesstops power surges from damaging your amps. Mount on panel or firewall.
√ Typically used in auxiliary and accessory circuits for trucks, buses, RV's, ATV Winches and marine applications. Also used in battery charges and DC sound amplifier system.
Introduction:
- Easy to use and durable, Use in place of an inline fuse holder
- Prevent excessive current, protect the electrical appliance
- Brand new ,made with high quality parts, apply in connecting audio power line
- No More Spending Money on Replacing Fuses
- Unique Push Button Reset can also be used as a Kill Switch
Specifications:
♦ Ampere range: 30A
♦ High Current Circuit Breaker
♦ 2 modes: Close/Off
♦ 6mm/7.6mm screw
♦ Material: Plastic and Metal
♦ Dimention: 98mm (L) x 43mm (W) x 40mm (H)
♦ Net weight: 200 g
Package included:
2x 30A DC Auto Audio Circuit Breaker Reset Fuse holder
- Model: Car Audio Inline Circuit Breaker Fuse Holder 12V-24V DC 30A For Choose, Size: 98mm (L) x 43mm (W) x 40mm (H).
- Current: 1A-30A ,Voltage: 12V-24V DC. Brand new ,made with high quality parts, apply in connecting audio power line.
- Manual Reset circuit breaker 30A, Red manual reset button, rubber boots for water protection, compatible with all 12V/24V Systems
- Unique Push Button Reset can also be used as a Kill Switch. Easy to use and durable, mount on panel or firewall.
- Use for: Typically used in auxiliary and accessory circuits for trucks, buses, RV's, ATV Winches and marine applications. Also used in battery charges and DC sound amplifier system. Car audio video system, boat, marine, bike use stops power surges from damaging your amps.
Product description
Description:
√ Prevents excessive current and overload protection for Amps, Audio electronics, audio/video systems and accessories in car, boat, marine vehicles and bikesstops power surges from damaging your amps. Mount on panel or firewall.
√ Typically used in auxiliary and accessory circuits for trucks, buses, RV's, ATV Winches and marine applications. Also used in battery charges and DC sound amplifier system.
Introduction:
- Easy to use and durable, Use in place of an inline fuse holder
- Prevent excessive current, protect the electrical appliance
- Brand new ,made with high quality parts, apply in connecting audio power line
- No More Spending Money on Replacing Fuses
- Unique Push Button Reset can also be used as a Kill Switch
Specifications:
♦ Ampere range: 150A
♦ High Current Circuit Breaker
♦ 2 modes: Close/Off
♦ 6mm/7.6mm screw
♦ Material: Plastic and Metal
♦ Dimention: 98mm (L) x 43mm (W) x 40mm (H)
♦ Net weight: 100 g
Package included:
1x 12V-24V 150A DC Auto Audio Circuit Breaker Reset Fuse holder
- Model:Car Audio Inline Breaker Circuit Fuse 12V-24V DC 150A For Choose
- Size: 98mm (L) x 43mm (W) x 40mm (H)
- Current: 1A-150A ,Voltage: 12V-24V DC
- Material: Plastic and Metal
- Use for: Car audio video system, boat, marine, bike use. Stops power surges from damaging your amps. Mount on panel or firewall.
User questions & answers
Question: | Is this waterproof |
Answer: | So sorry , it can not . Thank you for your understand . If you like a lager screen of fitness tracker . I suggest you buy our new and upgrade color big screen H706 fitness tracker . The link is : https://amzn.to/2MCpIe1 |
Question: | What size is the cable stud? is it 1/4 x 20 or larger |
Answer: | Fitpolo customer service. |
Question: | So, if this is a breaker instead of just a fuse holder, what's the difference between this and what this company sells as a "breaker |
Answer: | Try adjusting first from the radio itself by the bass and treble adjustments, then adjust the gain and and bass levels on the amp itself after uve done that, I usually just keep the radio bass level all the way down and adjust from the amp itself and I can change the volume no problem, or a remote bass level line for the specific amp, it's a knob u install and allows u to increase, and decrease bass at will |
Question: | somewhat confusing in description of "package" . Is this a complete breaker, or a 'fuse holder', that we would open and put a fuse inside of |
Answer: | Yes, you would have to buy speakers that use speaker wire and are standalone and also would have to buy a aux to rca adapter. You would have to splice the wire and sauter them together which will take some work. Probably better off buying speakers |
Latest Reviews
View all
Epson Airprint Printers
- Updated: 05.07.2023
- Read reviews

Reflective Vests
- Updated: 25.07.2023
- Read reviews

Compact Ga Pressure Washer
- Updated: 24.03.2023
- Read reviews

2 Year Old Gifts
- Updated: 10.05.2023
- Read reviews

Light And Magnifiers
- Updated: 03.04.2023
- Read reviews