12 best kayak rack for rv bumper

Product description

The Camco RV Ladder Mount Bike Rack easily installs onto standard RV ladders, and holds up to two bikes. The form fit cradles securely hold your bikes, and the straps provide added security. The Bike Rack has soft grip handles and locking pins to keep it in place. Folds for easy storage.

• Form fit cradles securely hold your bikes
• Easily installs to fit standard RV ladders
• Bonus straps provide added security
• Folds for storage
• Holds two bikes , Max weight upto 60 lb

User questions & answers

Question:	Would this hold one of the smaller blue sewer tanks
Answer:	If you have a removable end on the discharge end of the hose your able to attach it there or on the inlet side
Question:	Will this hold the cloth scissor like camp chairs that most campers are using now
Answer:	Yes
Question:	Are the rack clamps large enough to close around the steps of a typical aluminum step ladder
Answer:	You cannot. The ends are glued into the hose.
Question:	I am looking for a rack to carry a step ladder. Would this work
Answer:	A 10' sections will loosely compress down to 49", you will need to apply the caps to keep it at the length.

Product features

Camco RV Ladder Mount Bike Rack

The Camco RV Ladder Mount Bike Rack easily installs onto standard RV ladders, and holds up to two bikes, with a maximum combined weight rating of 60 lbs. The form fit cradles securely hold your bikes, and the straps provide added security. The Bike Rack has soft grip handles and locking pins to keep it in place. Folds for easy storage.

• Form fit cradles securely hold your bikes
• Easily installs to fit standard RV ladders
• Bonus straps provide added security
• Folds for storage
• Holds two bikes - max weight 60 lbs

Product description

Put that RV bumper of yours to use and add some fun to your trips with the Bumper-Mounted 2-Bike Rack from Quick Products! The rack features two platforms that easily mount to your 4” to 4.5” square bumper and give you completely customizable control over the width, ensuring that your bike fits perfectly every time. Slotted tire wells hold each bike securely while a convenient stabilizer post provides an anchor to both support and fasten your bikes to. Note: Will not fit fat-tire bicycles or bicycles with wheels over 29”. Weight should not exceed 30 lbs. per bicycle. Caution: Before installation, be aware that RV manufacturers may place load restrictions on their vehicle’s bumpers. These load restrictions must be followed to create a safe RVing experience. If you are unaware of your bumper’s load restrictions, please consult your manufacturer for information to ensure safe use. Install only on continuous-weld steel bumpers.

• Conveniently carry up to two bikes from your 4” to 4.5” square bumper
• Adjustable mounting allows a fit for nearly any length bicycle
• All-steel construction, powder coated for corrosion resistance
• 30 lb. weight capacity per bicycle
• Will not fit fat-tire bicycles or bicycles with wheels over 29”
• Slotted tire wells hold each bike securely while a convenient stabilizer post provides an anchor to both support and fasten your bikes to.

User questions & answers

Question:	Will this rack hold kayaks as well
Answer:	I would not. You need the support of screws to hold the weight of a bicycle.
Question:	As this mentions, this is basically 2 racks. Are they attached to one another? What is the size of each rack? I want to use them to hold cargo box
Answer:	No, the hook cannot be changed to the other direction.
Question:	What if you had 35 lb on one of the brackets would that be okay
Answer:	Don’t know about that specific weight but I have a large mountain bike that has 29” wheels and it works fine. It comes with 4 screws to attach it to the wall. I attached my screws to the wall stud. I believe that if you do that it should be ok. Hope this helps.
Question:	Can we tow a boat trailer
Answer:	Only one set of wheels, so can set up four trays, I personally did a 4 tray in my bathroom and it’s AWESOME. one tray can be used on its own absolutely.

Product description

Made by the leaders in outdoor gear storage, StoreYourBoard, the Hi-Lift Kayak Ceiling Hoist is the perfect solution if you’re looking to clear up floor or wall space in your garage, shed, or boathouse. This easy-to-use ceiling lift is an entire hoist system that allows you to effortlessly store your kayak overhead. Overhead storage is one of the most underutilized storage spaces in homes, garages, and boat houses. Do yourself a favor and pick up the Kayak Ceiling Hoist to organize and reduce your home or boathouse’s clutter!

• HEAVY DUTY KAYAK STORAGE HOIST: easily raise your kayaks for ceiling storage
• STRAPS FIT ANY KAYAK SIZE: adjustable straps fit all kayaks widths and lengths (up to 60 lbs)
• CLASSIC vs. PRO: the Pro version includes an adjustable horizontal center strap to secure your vertical hoist straps. The PRO version also includes upgraded, higher-strength loading straps
• UTILIZE YOUR OVERHEAD SPACE: get organized by hanging and storing your kayak in your overhead space with this pulley and hoist storage system
• QUICK & EASY INSTALL: with included instructions and mounting hardware, great for home and garage storage - see our installation video!

User questions & answers

Question:	What is the length of the green strap? Is it one long strap or two
Answer:	You need to return item for refund and then purchase another item
Question:	Can I use 2 sets to lift 1 kayak that’s around 100lbs
Answer:	The straps are 94" (7' 10") in length and 2" wide.
Question:	My product was missing a pulley now it isn’t functional !! Any way they can send me the part that I need
Answer:	Yes, should work well
Question:	What amount of strength does it take to move up and down? Also if not held while coming down will it slam down
Answer:	Yes you can shorten. I have one that is hanging on an 8' ceiling and but hangs down about 20-24" and the other hangs from a 9' ceiling and it hangs down about the same. Just change the loop location with the hooks.

Product description

The Rhino Bumper Mount Tote Tank Holder securely holds your Rhino Tote Tank onto standard RV bumpers and fits both 4-inch and 4-1/2-inch bumpers. It’s perfect for RVs without ladders. The holder is constructed of powder-coated steel with zinc-coated hardware for durability. Holds all four Rhino Tote Tank sizes (15, 21, 28 and 36 gallons) and is also compatible with most portable waste holding tanks on the market. Includes straps to secure your tote tank in place.

• Securely holds your Rhino tote tank onto standard RV bumpers
• Perfect for RVs without ladders
• Fits 4" and 4-1/2" bumpers
• Made out of powder-coated steel with zinc-coated hardware included; also includes straps to secure your tote tank in place
• Holds all four Rhino Tote Tank sizes (15, 21, 28 and 36 gallons); compatible with most portable waste holding tanks on the market

User questions & answers

Question:	Can this be used to hold gasoline
Answer:	by trial & error, i put a line on a chopstick w permanent marker. i hold that line flush with top of 3/4” hose opening & use it as a dipstick. i watch to see the water rising for when i shut off my dump valve. BE CAREFUL - in some light conditions it’s very hard to see the water. also barker makes a bobber fill gage they sell separately for that hose opening. amazon sells it. https://www.amazon.com/dp/B0007KQY3K/ref=cm_sw_r_cp_api_i_hs7UCbZRMYZ5Z
Question:	How do you adapt the end to empty at dump station? And how do you secure it to the tote when rolling to the dump station
Answer:	Gasket is built in, cap fits snugly and does not leak.
Question:	When will this be back in stock
Answer:	The cap should come with a gasket. Please contact us if you failed to receive one. 800.334.2004, customer service.
Question:	How do you know when it's full? Meaning, if I have a 50g black tank and this is 21g what happens then? Thanks in advance
Answer:	If the tote uses the industry standard, it should fit. Try the one on your trailer, if it fits, this should fit.

Product features

Camco Rhino Bumper Mount RV Tote Tank Carrier (39010)

The Rhino Bumper Mount Tote Tank Holder securely holds your Rhino Tote Tank onto standard RV bumpers and fits both 4-inch and 4-1/2-inch bumpers. It’s perfect for RVs without ladders. The holder is constructed of powder-coated steel with zinc-coated hardware for durability. Holds all four Rhino Tote Tank sizes (15, 21, 28 and 36 gallons) and is also compatible with most portable waste holding tanks. Includes straps to secure your tote tank in place.

Product description

About Swagman

"Ride, paddle, explore: seek your adventure"

That philosophy was the intention of founders Jim and Jan Morris who saw an opportunity to create a better way to transport your bike back in the early 90’s. Swagman was one of the first companies worldwide to design and market a hitch style bike rack. Over the years, that small bike rack company based in the Okanagan Valley of British Columbia grew to include numerous other ground breaking designs in the North American Bicycle, RV and Automobile markets.

The 2-Bike RV Bumper Rack provides an easy solution for carrying bikes on the back of an RV. The sturdy rack mounts onto a 4 to 4.5-inch continuous, welded steel bumper and provides a platform where you can stand your bikes. The rack boasts solid steel construction and offers a weight capacity of 30 pounds per bike.

• Transports 1 to 2 bicycles on an RV or camper trailer bumper (max 30 lb. per bike)
• Designed for 4" to 4.5" square RV bumpers, installs with a 6.5" and 8" long bolts around the RV bumper
• Heavy duty steel construction with a black paint finish and powder-coated to resist corrosion
• Secure the steel U-Bolts provided with the rack to your bumper. The upright bar in the center of the rack gives added support to your bikes while towing
• Simple to use and supports various bike sizes, frames and wheels

User questions & answers

Question:	Will this rack interfere with a tow bar, towing our car behind our rv
Answer:	I'm sorry, we have a fifth-wheel and I'm not familiar with the equipment needed to tow a car behind an rv.
Question:	Would it be able to carry 4 bikes of different sizes/shapes (mountain bike type and beach cruiser type
Answer:	When I searched for our bike rack there was a Swagman four bike option available. My husband and I chose the two bike version rather than the four bike.
Question:	Will this fit on the bumper with a spare tire in the middle? I have an older 5th wheel
Answer:	I have a 27' travel trailer. Had the same problem with the fit, so I had to move the spare & mount it on to the frame of the trailer right behind the hitch. Works great.
Question:	can it be when towing a car behind my Rv
Answer:	Hi, I don't tow behind my RV but I mesure from my RV to the second bike handle. It is 34 inches. Hope that help you to decide.

Product features

Carry 1 or 2 bikes easily

Simple and easy to use you will want to take this bumper rack with you on all your road trips. Not for use on aluminum or spot welded bumpers.

Distance from bumper to end of rack: 34". First bike sits 4-3/4" out from bumper.

Simple yet packed with features

• Transports 1 or 2 bicycles on an RV or camper trailer bumper (max 30 lb. per bike)
• Designed for 4" to 4.5" square RV bumpers, installs with a 6.5" and 8" long bolts around the RV bumper
• Heavy duty steel construction with a black paint finish and powder-coated to resist corrosion
• Secure the steel U-Bolts provided with the rack to your bumper. The upright bar in the center of the rack gives added support to your bikes while towing.
• Simple to use and supports various bike sizes, frames and wheels.

Specifically conceived for RV

The Swagman RV bumper rack will safely transport your bikes behind your 5th wheel, RV or camper trailer.

It has been specifically designed to withstand the use with such vehicle.

About Swagman

Swagman designs products that can be trusted to get your equipment to it's destination; the trailhead, the bike shop, to your race, your first ride; or to the best ride of your life.

Our products are always evolving to meet the demands of the bike and automobile world. Our mission is to make your life easier and more convenient so that you can focus on the sport that you love.

Our company is made up of outdoor enthusiasts just like you and we understand the necessity of relying on a rack to get your bikes safely to your destination.

Find the perfect rack for your ride.

Product description

About Swagman

"Ride, paddle, explore: seek your adventure"

That philosophy was the intention of founders Jim and Jan Morris who saw an opportunity to create a better way to transport your bike back in the early 90’s. Swagman was one of the first companies worldwide to design and market a hitch style bike rack. Over the years, that small bike rack company based in the Okanagan Valley of British Columbia grew to include numerous other ground breaking designs in the North American Bicycle, RV and Automobile markets.

The 4-Bike RV Bumper Rack provides an easy solution for carrying the whole family's bikes on the back of an RV. The sturdy rack mounts onto a 4 to 4.5-inch continuous, welded steel bumper and provides a platform where you can stand your bikes. The rack boasts solid steel construction and offers a weight capacity of 30 pounds per bike.

The RV Bumper Rack provides a stable platform to stand up to four bikes.

• Transports 1, 2, 3, or 4 bicycles on an RV or camper trailer bumper (max 30 lb. per bike)
• Designed for 4" to 4.5" square RV bumpers, installs with a 6.5" and 8" long bolts around the RV bumper
• Heavy duty steel construction with a black paint finish and powder-coated to resist corrosion
• Secure the steel U-Bolts provided with the rack to your bumper. The upright bar in the center of the rack gives added support to your bikes while towing
• Simple to use and supports various bike sizes, frames and wheels

User questions & answers

Question:	Rv dealer installed, bikes won't fit. Racks maybe to far apart
Answer:	You would have to loosen the bolts and push the bike racks closer together. If you have different size bikes, use the largest one to for fitting. Then retighten the bolts to the bumper.
Question:	How low, will it drag or bottom out while pulling into parking lots,etc
Answer:	We travel a lot and this was never an issue!
Question:	Does this work with a pop up camper
Answer:	You need a strong bumper. Most pop ups are lightweight, and probably don't have one that will work. If the bumper is 1/8th steel or aluminum with strong welds to the frame it could work. It needs to support roughly 150lbs.
Question:	What to do if it is damaged during transportation
Answer:	Be more careful next time

Product features

Carry 1 to 4 bikes easily

Simple and easy to use you will want to take this bumper rack with you on all your road trips. Not for use on aluminum or spot welded bumpers.

Distance from bumper to end of rack: 34". First bike sits 4-3/4" out from bumper.

Simple yet packed with features

• Transports 1 to 4 bicycles on an RV or camper trailer bumper (max 30 lb. per bike)
• Designed for 4" to 4.5" square RV bumpers, installs with a 6.5" and 8" long bolts around the RV bumper
• Heavy duty steel construction with a black paint finish and powder-coated to resist corrosion
• Secure the steel U-Bolts provided with the rack to your bumper. The upright bar in the center of the rack gives added support to your bikes while towing.
• Simple to use and supports various bike sizes, frames and wheels.

Specifically conceived for RV

The Swagman RV bumper rack will safely transport your bikes behind your 5th wheel, RV or camper trailer.

It has been specifically designed to withstand the use with such vehicle.

.

About Swagman

Swagman designs products that can be trusted to get your equipment to it's destination; the trailhead, the bike shop, to your race, your first ride; or to the best ride of your life.

Our products are always evolving to meet the demands of the bike and automobile world. Our mission is to make your life easier and more convenient so that you can focus on the sport that you love.

Our company is made up of outdoor enthusiasts just like you and we understand the necessity of relying on a rack to get your bikes safely to your destination.

Find the perfect rack for your ride.

Product description

The Quick Products Economy RV Bumper Receiver Adapter turns your bare bumper into a 2" receiver, giving you the ability to add a bike rack or storage tote to your RV where you would not have been able to before. The receiver fits a 2" tube and bolts onto your existing 4 x 4.5 inches bumper. 200 lbs. tongue weight capacity. NOT intended for towing purposes.

• Bolts onto 4 x 4.5 inches bumper
• Accepts 2" cargo carrier tube
• 200 lbs. tongue weight capacity
• Not intended for towing purposes
• One-year replacement warranty

User questions & answers

Question:	Is it easy to carry
Answer:	Yes. Easy to install as well.
Question:	can this be good for 4 bikes
Answer:	I have this mounted on my RV bumper with my Thule 4 bike carrier. Although I only transport 2 bikes, I wouldn't be hesitant at all to load an additional 2 bikes on it. It's stout. If your carrier is of good quality, this receiver will hold it.
Question:	Ships between 1 and 2 months? Is this correct
Answer:	I received mine on 1 week.
Question:	Can the hitch be placed underneath the bumper instead of on top
Answer:	Don't know why it wouldn't work. However, there may be clearance issues when exiting a sloped driveway.

Product description

About Swagman

"Ride, paddle, explore: seek your adventure"

That philosophy was the intention of founders Jim and Jan Morris who saw an opportunity to create a better way to transport your bike back in the early 90’s. Swagman was one of the first companies worldwide to design and market a hitch style bike rack. Over the years, that small bike rack company based in the Okanagan Valley of British Columbia grew to include numerous other ground breaking designs in the North American Bicycle, RV and Automobile markets.

• Carries up to 2 bikes
• Mounts around most spare tires
• Anti-sway cradles prevent bike-to-bike contact
• Attaches to a 4" - 4-1/2" continuously welded steel bumper
• All hardware is included for attachment to bumper and carrying the bike

User questions & answers

Question:	I’m looking for something like this to put folding camp chairs and small folding camp tables on the bumper for quick access, would this work
Answer:	probably not. this is more for a bike to hang, I am not sure where the table would go, the chairs might be ok. hope this helps
Question:	if you pull the pins out of this bicycle rack can a pot before to fit a hatchback
Answer:	No, this is specifically designed to bolt around a RV travel trailer or 5th wheel bumper.
Question:	We have two kids sized bikes. Does anyone know if they will fit on this carrier
Answer:	I'm sure there will be a way the bikes will fit on this carrier
Question:	What is the dimension (length) of the bottom two bars? In other words, how far from the bumper does it extend
Answer:	It sticks out around a foot away from the tire make sure your bumper is sturdy and has extra bracing it broke my bumper and ended up dragging it down the interstate

Product features

Around the spare deluxe RV bike rack

Around the Spare deluxe bike rack is made to mount around most spare tires.

It's solid construction and anti-sway cradles prevent bike-to-bike contact. The bikes are secured to the rack using durable rubber straps.

About Swagman

Swagman designs products that can be trusted to get your equipment to it's destination; the trailhead, the bike shop, to your race, your first ride; or to the best ride of your life.

Our products are always evolving to meet the demands of the bike and automobile world. Our mission is to make your life easier and more convenient so that you can focus on the sport that you love.

Our company is made up of outdoor enthusiasts just like you and we understand the necessity of relying on a rack to get your bikes safely to your destination.

Find the perfect rack for your ride!

Product description

About Swagman

"Ride, paddle, explore: seek your adventure"

That philosophy was the intention of founders Jim and Jan Morris who saw an opportunity to create a better way to transport your bike back in the early 90’s. Swagman was one of the first companies worldwide to design and market a hitch style bike rack. Over the years, that small bike rack company based in the Okanagan Valley of British Columbia grew to include numerous other ground breaking designs in the North American Bicycle, RV and Automobile markets.

• RV APPROVED: The TRAVELER XC2 works well with various sizes of trailers & campers
• EASY TO ASSEMBLE: Only takes a few minutes to assemble following the instructions.
• CONVENIENT: Once installed, simply load your bikes and you are ready to go! When not in use you can fold the upright bar down to give access to the rear of the RV
• STURDY: The light but sturdy design keeps your bikes in place, even on the those long journeys!
• VERSATILE: Easily transports up to 2 bicycles and is compatible with a 2" Class 3 hitch receiver or mounts to a 4.5" continuous steel welded RV Bumper Adapter. Also comes with a 2" Bumper Adapter.

Product features

Swagman Traveler XC2

The best value RV approved bike rack made to haul your bikes behind your RV, 5th wheel or trailer.

Swagman RV products are put through rigorous testing program to ensure they can handle the extra stress of being towed behind an RV. You can be confident the Traveler XC2 will provide the ultimate in reliability getting your bikes to their destination safely.

About Swagman

Swagman designs products that can be trusted to get your equipment to it's destination; the trailhead, the bike shop, to your race, your first ride; or to the best ride of your life.

Our products are always evolving to meet the demands of the bike and automobile world. Our mission is to make your life easier and more convenient so that you can focus on the sport that you love.

Our company is made up of outdoor enthusiasts just like you and we understand the necessity of relying on a rack to get your bikes safely to your destination.

Find the perfect rack for your ride!

Product description

Mount-n-Lock developed the very first RV bumper reinforcement brackets - SafetyStruts - and has continued to refine the patent-pending designs over the years to provide customers the very best bumper support money can buy, from the unique design that fits the widest variety of frames, to the industrial grade fasteners unavailable in stores, to the thread-rolling, self-tapping bolts for easy and secure installation on tube frames, to the high-speed steel drill bits included with every order. Our clear, concise, illustrated, English-language instructions make installation a breeze! Safely add bumper-mounted hitches, bike racks, generators, and cargo to your Travel Trailer, Fifth Wheeler, Motor Coach…Heck, nearly any RV. Common square tube RV bumpers weren't designed to carry much cargo weight as they are typically attached with just the thinnest of welds. Sure, you could pay someone to beef up the factory's bumper welds, but at $80 per hour, this gets expensive fast! Plus, your thin-walled bumper is still "hanging" from the same attachment point as before. Instead, with only a drill and a couple of wrenches, you can install a superior solution in roughly 30 minutes. Don't skimp when it comes to the safety of your expensive gear. Be safe; be smart. These inexpensive, high-precision parts bolt directly to your RV's frame and support the bumper from underneath, stopping the metal fatigue that leads to bumper failure. Combine with our bumper-mounted HiLoHitch (www.amazon.com/dp/B0769ZTLRL) and GennyGo Generator & Cargo Carrier Trays (www.amazon.com/dp/B07NTS82X9) for safest travel. Made in the USA and bounce-tested over 1 million cycles to determine 400 foot-pound cargo capacity. Questions? Let our experts help! Contact us at: https://www.amazon.com/ss/help/contact/writeMessage?writeButton=Submit+Query&subject=5&orderID=&sellerID=A3VPL55AMV0CZY&asin=&marketplaceID=ATVPDKIKX0DER&language=en_US

• Significantly Increases RV Bumper Capacity | Fits 4-Inch to 4.5-Inch Square Bumpers
• Strongest Brackets Sold - 25% Thicker Than Others. Safely Transport Your Expensive Gear
• Made in USA from High Quality Materials - Powder Coated, Galvanized Steel Resists Rust & Looks Great
• Includes Both Needed Drill Bits, Self-Tapping Bolts, Standoff Spacers & More to Fit Most Frames
• Selection Guide, Installation Guide, Lifesize Cutout, Videos and More Available Upon Request

User questions & answers

Question:	How does these attach? Are there holes drilled into the frame itself
Answer:	Thanks for your inquiry. Yes, 3 holes are drilled into each frame rail (3 holes per bracket). We supply the two needed drill bits with our Type SNU-HD kit and we supply self-drilling bolts and a magnetic nut driver with our Type SSN-HD kit to make installation quick and easy.
Question:	Will these brackets provide the necessary support for a bumper mounted tray, a generator box, and a 100# +/- inverter type generator
Answer:	Short answer is yes, but with the caveat that we don't know the weight of your tray or generator box. For what you are suggesting, we would recommend our GennyGo RevX RV Bumper-Mounted Generator & Cargo Carrier Tray Kits (http://www.amazon.com/dp/B085ZLLY8Q), which are much more stable than hitch-mounted trays.
Question:	Will this fit a 4" bumper..Travel Trailer
Answer:	Yes, it fits the 4in bumper on my 2020 Forest River Mini-Lite. It give me peace of mind that the bike rack I also have on that bumper is going to stay put.
Question:	Will this fit with my 3 in. support tube to my 4 in. bumper
Answer:	I cant say for sure but i thunk it would. You would just have to the alternate holes when mounting.

Product description

This durable kayak rack is designed for use on docks and mounted on walls. Easily supports all styles and types of canoes, surf boards, kayaks, and SUP's. Strong steel construction, powder coated to ensure suitable for both saltwater and freshwater applications. 48 inch height frame allows 2 paddle boards to fit on rack.

• 32 inch wide support arms - supports many times the weight of an average kayak
• 2' spacing lower rack - top rack open to accommodate any height
• Adjustable locking straps, with locking hook at one end
• Robust powder coated metal square tubing combined with thick metal fabrications & mig welded for strength
• Universal mount is easy to assemble and take down - removable bolt detaches assembly for quick storage

User questions & answers

Question:	Can the rack be attached to the side of the dock so it doesn't take up space on the dock
Answer:	This rack can be attached securely to the edge of the dock. There are other models that can be attached on the sides of the dock.
Question:	Where do I get post lights like the ones shown on the dock
Answer:	That is not something we carry at this time,.
Question:	Is this a pair, doesn't it take 2 to support a kayak
Answer:	I comes in a pair. 2 posts with 4 racks
Question:	It appears that the bottom of the lower rack is 2'-0" above the base, is there a way to raise this height or buy extensions to attach to base plate
Answer:	Hello, this design doesn't have adjustable racks or base.

Product features

Kayak Holder

• Easily mounts to your dock, deck, boathouse or any vertical surface
• Supports many times the weight of an average kayak
• 1.5" (3.8cm) round steel tubing and heavy-duty steel construction with powder coated bracket
• Thick layer of foam protects your board or kayak from scratches
• Folds away when not in use to conserve space
• Mounting hardware not included due to widely varying mounting surfaces

SUP/Kayak Rack

• 32" (81.3cm) wide support arms fits 2 kayaks, canoes, pdl, surf boards, etc.
• Adjustable locking straps, with locking hook at one end
• Supports many times the weight of an average kayal
• 2' (61cm) spacing lower rack
• Top rack open to accommodate any height
• Robust powder coated metal square tubing combined with thick metal fabrications & MIG welded for strength
• Universal mount is easy to assemble and take down
• Removable bolt detaches assembly for quick storage
• Powder coated popular grey Hammertone

Product description

About Swagman

"Ride, paddle, explore: seek your adventure"

That philosophy was the intention of founders Jim and Jan Morris who saw an opportunity to create a better way to transport your bike back in the early 90’s. Swagman was one of the first companies worldwide to design and market a hitch style bike rack. Over the years, that small bike rack company based in the Okanagan Valley of British Columbia grew to include numerous other ground breaking designs in the North American Bicycle, RV and Automobile markets.

• EASY TO ASSEMBLE: The RV BUMPER ADAPTER is very easy to install it only takes 4 bolts (included) and secures tightly around the bumper
• RV APPROVED: The RV BUMPER ADAPTER was put through a rigirous testing program to ensure it can handle the extra stress of being towed. You can be confident knowing the bumper adapter will get your bikes to their destination safely
• STURDY: The adapter is made of solid steel and has a powder coated exterior to resist corrosion. The bumper adapter is built for a 4"- 4.5" continous welded steel bumper
• VERSATILE: The adapter creates a 2" hitch receiver, the bumper adapter provides a secure way to carry an RV Approved hitch mount rack
• Sport type: Cycling

User questions & answers

Question:	will it support a cargo carrier with Honda 2000 generator , Ice chest and 5 gal fuel can
Answer:	That more likely depends on the structure of your bumper. If it is square steel and welded to the main frame of the trailer it still likely be fine. The adapter will support it, Will your bumper?
Question:	When mounting this on a fifth wheel bumper did have to be installed with a torque wrench
Answer:	No a pretty basic design. I used it for a bicycle mount. I had too many bikes on it and the weight caused my RV bumper to crack. Just a watch out.
Question:	Will it work on an aluminum bumper
Answer:	I wouldn't recommend using on an aluminum bumper. It's meant to be used on a 4" steel continuous weld bumper.
Question:	How does bike rack or whatever you are attaching to hitch get secured. Picture looks like a bolt. Can you use standard hitch pin
Answer:	Yes, you use a standard pin that are used on most all hitches. The bolt you see gets tightened so the bike rack or whatever you are mounting does not move to much from side to side. The bolt holds the rack firmly in place.

Product features

The Swagman Bumper Adapter

Features:

Easy to Install

The Bumper Adaptor takes 4 bolts and secures tightly around the bumper.

Solid Steel Construction

This bumper adapter will mount to a continuously steel welded bumper. ***If you cannot identify if your bumper is appropriate, please contact your manufacturer or local RV dealer for clarification.

Carry your bike Rack

When used with a hitch pin and anti-wobble set screw, the bumper adapter provides a secure way to carry an RV approved hitch bike rack.

View other Swagman RV Approved Products

The Dispatch:

Locking hitch pin and cable included.

Sliding wheel trays adjust to accommodate bikes of different lengths.

Wheel ratchet straps secure wheels to trays.

Designed for increased ground clearance.

View other Swagman RV Approved Products

The Traveler XC2:

-2 inch bumper adapter included.

-Fits into a 2 inch Class 3 Hitch or mounts to a 4.5 inch continuously steel welded RV bumper.

-Push-button ratchet arm easily adjusts to secure your bike.

-Locking hitch pin and 10 mm security cable sold separately.

View other Swagman RV Approved Products

The XP 4 Standard RV:

Cradles rotate to keep wheels level to the ground to provide greater ground clearance.

Sot Kraton cradle wraps help to provide a secure, scratch-free ride for your bike.

Locking knob included.

View other Swagman RV Approved Products

The Trailhead 4:

Transports up to 4 bikes.

Anti-sway cradles prevent bike-to-bike contact.

Fits 2 inch receiver.

About Swagman

Swagman designs products that can be trusted to get your equipment to it's destination; the trailhead, the bike shop, to your race, your first ride; or to the best ride of your life.

Our products are always evolving to meet the demands of the bike and automobile world. Our mission is to make your life easier and more convenient so that you can focus on the sport that you love.

Our company is made up of outdoor enthusiasts just like you and we understand the necessity of relying on a rack to get your bikes safely to your destination.

Find the perfect rack for your ride!