12 best auto bumper protectors
Auto bumper protectors are aftermarket accessories designed to safeguard a vehicle's bumpers from damage and scratches. They serve as a protective barrier between the vehicle's bumper and objects that might come into contact with it, such as other cars' bumpers, parking barriers, and low-speed impacts.Here are some key points about auto bumper protectors:
Material: Bumper protectors are typically made from durable materials such as rubber, plastic, or stainless steel. These materials are chosen for their ability to absorb impacts and resist wear and tear.
Installation: Most bumper protectors are designed to be easy to install. They often attach to the bumper using adhesive, clips, or screws. Some are custom-fit for specific vehicle makes and models, while others are more universal in design.
Protection: Bumper protectors help shield the bumper from minor dents, dings, and scratches that can occur during everyday driving and parking. They are especially useful in urban areas where parking spaces can be tight, and the risk of bumper-to-bumper contact is high.
Aesthetic Appeal: In addition to their protective function, some bumper protectors are designed to enhance the vehicle's appearance. They may come in various styles, finishes, and colors to match the vehicle's aesthetics.
Compatibility: It's essential to choose a bumper protector that is compatible with your vehicle's make and model. This ensures a proper fit and maximum protection.
Removability: Some bumper protectors can be easily removed if you want to clean or replace them. This feature can be convenient for maintenance.
Durability: The durability of a bumper protector depends on the quality of the materials used and the design. High-quality protectors are more likely to withstand wear and tear over time.
Cost: Bumper protectors come in a range of price points, depending on their materials, design, and brand. It's advisable to choose a protector that offers a good balance between cost and quality.
Legal Considerations: While bumper protectors are generally legal and do not interfere with safety features, it's essential to check your local regulations and ensure that any accessories you install comply with the law.
DIY Installation: Many bumper protectors are designed for do-it-yourself installation, but if you're unsure about the process, it's recommended to have them professionally installed to ensure a secure fit and proper protection.
In summary, auto bumper protectors are practical accessories that can help preserve the appearance and value of your vehicle by preventing damage to the bumpers. They come in various materials and styles, making it possible to find one that suits your vehicle's needs and your aesthetic preferences.
Below you can find our editor's choice of the best auto bumper protectors on the market
San Auto Rear Bumper Guard Protector Anti-Collision Patch Anti-Scrape Black Rubber Universal Trunk Door Entry Guards for SUV/Cars Non Slip with Tape 38 inch
- 【38 Inches Fit Most Cars】Length: 38 inch, width: 3 inch, black. Universal fit for most of the trucks, pickups or suvs.
- 【High Quality Materials】This bumper guard protector is made of high quality material, durable,flexible, and bendable, will not crack or break. Groove design and non SLIP function, effectively prevent the falling of things that you put.
- 【Great Performance】Scratch resistant, abrasion resistance, anti-aging. Protect your car rear bumper when loading or unloading luggages, groceries, tools box and so on, it prevents nasty scratches and provides protection.
- 【Easy To Install and Remove】Back glue stick on the product, on the installation position can be installed off.
- 【Package includes】Comes with glue tape, easy for you to install without other tools. And pls ensure the surface is clean and no oil, water and dirty before gluing the tape.
User questions & answers
| Question: | How thick is it |
| Answer: | It should but you should measure |
| Question: | Will the 35” or even the 38” fit a 2020 Mazda CX-5 without interfering with the lift gate sensor |
| Answer: | It is 38 inchs long. |
| Question: | will it fit 2017 acura mdx |
| Answer: | Yes with the correct mount. |
| Question: | what is the width |
| Answer: | even though this was designed for an ATV, the remote reaches from the front bumper of my YJ Jeep into the cab without any issues. I can sit inside the cab all zipped up and snatch out stuck vehicles all day.... |
Product features
Universal Rear Bumper Protector Guard
Features:
ANTI-SLIP design
Easy installation
Not easy to deform
Made of soft anti-scrape rubber
Universal fits for most cars / SUVS
Thick, durable and flexible
Resistant to high and low temperature
Prevents your car from wear and tear, paint scratches
BLACK EDITION Bumper Bully - Bumper Protector - Rear Bumper Protection
Product description
The Black Edition is the entry-level BumperBully model and comes standard with patented stabilizer bars (black color). The black on black design with a white logo gives the BumperBully Black Edition a stealth look and more subdued appearance. Please note the Black Edition BumperBully does NOT have steel reinforced straps or safety reflectors.
The BumperBully brand is #1 in bumper protection! The BumperBully is the only rear bumper guard made from a premium grade, soft, elastic rubber material, not PVC Plastic like many competing products.
The patented stabilizer bars enable the product to remain firmly in place on your bumper to offer maximum protection. The stabilizer bars add stability to the top of the BumperBully, preventing the corners from folding back and leaving your bumper exposed.
The Bumper Bully offers an extra wide bumper protector surface 46"x12”, which means it covers more of your car bumper. The best feature of the BumperBully car bumper guard is its unique shape and design; crafted to complement the graceful lines of all makes and models. The wider top portion gives maximum protection, while the lower portion tapers inward to ensure the product (if installed properly) will not block the exhaust pipes (you should never block vehicle exhaust pipes). No other bumper protector gives you all these benefits.
WARNING: Intended to be used on parked vehicles ONLY! Never drive with the BumperBully attached.
- Bumper Bully Is The #1 Rated Rear Bumper Protector
- SUPER WIDE Bumper Protection Area measuring 46" x 12" - The Largest Bumper Protector
- Patented Stabilizer Bars (Black Color)
- Water Proof Trunk Straps (Not Steel Reinforced)
- PREMIUM Grade Rubber Material (PVC FREE)
User questions & answers
| Question: | Will this fit a infinity g35x |
| Answer: | It will probably cover the sensors. I don't own it but someone in the reviews had the same issue. |
| Question: | Will this fit a bmw 528i |
| Answer: | Thanks for contacting us with your question. Yes, the BumperBully BLACK EDITION should fit the BMW X3 well. If you have any additional questions or concerns please contact us for assistance. |
| Question: | Will it effect the back up sensors on the bumper when placed over it |
| Answer: | Pretty thick but still Bendable and easy to apply. |
| Question: | Does it fit a 2019 bmw x |
| Answer: | Hi, it is universal fit for car bumpers, and the width is 2.9inch, you could check about it, thanks. |
Auto Ventshade 1534001 OE Style Bumper Protector for 2014-2019 Toyota Highlander
Auto Ventshade
Product description
OE Style Bumper Protectors shield your vehicle's rear bumper from wear and damage caused by day-to-day loading and unloading. Unlike flat bumper plates that protect only the top surface, Auto Vent shades design is custom-fit to wrap around the vulnerable bumper lip for maximum protection. OE Style Bumper Protectors are designed to match original equipment style, with a matte black finish that's 100% UV protected to resist chalking. They install in minutes and last a lifetime, thanks to their super-secure automotive-grade 3M adhesive.
- Protect your vehicle's rear bumper from wear and damage caused by day-to-day loading and unloading
- Custom-fit design wraps around the vulnerable bumper lip for maximum protection
- Matte black OE-Style finish is 100% UV protected to resist chalking
- Installs in minutes with automotive-grade 3M adhesive
- Proudly made in the USA and backed by a Limited Lifetime
User questions & answers
| Question: | Some reviews indicate that this may partially cover parking sensors. does anyone know if that is the case for the 2018 toyota highlander limited |
| Answer: | 45 1/2 '' |
| Question: | this looks like its someone universal. Will this fit on a 2020 Honda Pilot |
| Answer: | It fits my 2019 highlander limited with no problems. I’ve had about a week. Directions to install are clear. Only snag is they recommend not using the vehicle for 24 hours and Keeping it dry so the adhesive sets |
| Question: | What's the length on it |
| Answer: | Thanks for contacting us with your question.Yes, the BumperBully BLACK EDITION will fit your vehicle, however, if your rear license plate is located in your lower rear bumper you will have to remove the center portion of the BumperBully so that your rear license plate will remain visible when parking outdoors on the street. |
| Question: | Does it fit to toyota highlander |
| Answer: | Thanks for contacting us with your question.Yes, the BumperBully BLACK EDITION will fit the BMW 5 series well.If you have any further questions or issues please contact us for assistance. |
Auto Ventshade 34010 Rear Bumper Protector, OE Style for 2009-2010 Toyota Corolla
Product description
Custom-Fit Coverage; Wraps Around Bumper Lip. Covers Existing Scuffs/Scratches/Nicks. Installs In Minutes w/3M Automotive Grade Adhesive. Made In The USA. Backed By A Limited Lifetime Warranty.
- Auto Ventshade 34010 Rear Bumper Protector, OE Style for 2009-2010 Toyota Corolla
DT Auto Rear Bumper Cover Protector for Volvo (2006-16 S80)
Product description
Add protection to the bumper of your car from scuffs, nicks, scratches, and other damaging marks with the simple installation of a Rear Bumper Cover Protector. Installing a Rear Bumper Cover Protector is a quick and easy process, requiring no drilling with the assistance of 3M Tape. Rear Bumper Cover Protectors give your car a distinct new look, as well as add functionality.
- Fits 2006-2016 Volvo S80
- Comes complete with everything necessary for installation, including easy-to-follow installation instructions
- Made in the USA, no drilling required, textured surface provides slip resistance
- Added protection against scuffs, nicks, scratches, and other damaging marks
- Measured, pre-cut, and precision engineered to match
ToLanbbt Car Door Edge Guard Protector, Anti-Scratch Anti-Collision Strips, Car Door Scuff Plate Protectors, Transparent Invisible Tape Fits for Most Rear Bumper/Door (33Ft x 1.97” x 1/50”)
- ❥MATERIAL: The car door anti-collision strip is made of high quality PVC, it is with more powerful adhesive strength, more environmentally friendly. And this material is almost invisible but can help prevent chipping, scratching, scuffing to the protected surface. Good transparent effect of stealth, doesn’t affect the aesthetics of the vehicle, strong stealth protection performance.
- ❥Super Sticky: Firmly fit, not easy to degumming, bright after tearing such as new glue, tear off without trace, won’t leave glue residue, no damage to paint, keep your car door clean. Car door edge guard prevents rust, door scratches(when open or close the door), chipping paint and improve noise reduction.
- ❥FEATURES: Anti-stepping, anti-collision, sticky and firm, won’t fade, waterproof, sealed well, high temperature resistant, anti-aging, scratchproof, wear resistance. These door edge guards will protect vehicle door edges from nicks, chips, scratches and future damage.
- ❥Freely Cut: Can be free deformation and free clipping. According to your car door structure, can cut the length required at will. They install easily with no tools. This transparent car door seal strip is adopted thick film, full of toughness, don’t worry when touching with sharp weapon.
- ❥Generic: Suitable for cars, SUV, MVP or other models, car doors, hood, back trunk, engine door, tailgate door, front and back door, car door entry sill. In the metal edge of the car body between the car door and car body. You just paste the invisible car door edge guard on these place, no discoloration, fixes mode direct paste.
User questions & answers
| Question: | Is there any fading over time or discoloring of tape |
| Answer: | Yes. As long as there is no too much stress on the cracked material. |
| Question: | Could this product, instead of application to car, be applied to my garage wall where door hits? Wall is clean, painted wallboard |
| Answer: | It should stick to any thing. I used it to my car bumper and inside center console and it sticks good ! |
| Question: | Could i put this over a crack to hold |
| Answer: | We have a 2020 Toyota Highlander and the sensors are not blocked... hope this helps... |
| Question: | Would this work for the bottom of a bathroom door? I repaint the door over and over but the bottom of my daughters wheelchair continues to scratch it |
| Answer: | I own a 2019 Highlander, I really could not say definitively of it will fit a 2020 Honda Pilot. |
Product features
Can be anti-collision and Anti scratch between the car doors, wall edges or flower bed to protect car doors from paint off.
In the metal edge of the car body between the car door and car body. You just paste the invisible car door edge guard on these place, no discoloration, fixes mode direct paste.
Prevent scratch, protect the car body and door, such as:
- Door Edge--can prevent the injury from the door edge when open the door;
- Back Door--prevent the injury from the back door when get in or off the car;
- Car Door Inside Bottom--prevent the dirt of the shoes when get on or off the car;
- Door Bowl--the door handle is the part often be scratch;
- Bumper Corner--avoid scratching paint by small sharp little thing when driving at high speed;
- Wheel Eyebrow--prevent the dirt when driving on the complex road;
- Rear View Mirror--when parking, the most easy part to be scratched.
Invisible, transparent and traceless
No trace colloid, bright after tearing such as new glue tear off without trace, won’t leave glue residue, no damage to paint, keep your car door clean.
Toughness Foot
Wear resistance and Thickened flexible lamination, no fear of sharp tools, protect the car interior.
Freely Cutting
Can be free deformation and free clipping. According to your car door structure, can cut the length required at will.
Easy to use, install by paste.
How to Install?
- Find the correct installing position;
- Clean the surface of installation position, remove any oil, grease, wax, dust, etc., ensure it’s clean;
- Make sure the installation position is dry, and then place the protector strips on the exact position carefully, paste the trim, press it to ensure good adhesion;
- Please don’t wash your car within 24 hours, ensure it can be get the best bond strength.
If the mark or scratch is already there, the film cannot cover it cause it's clear material, just for future protection.
BumpShox XL - Front Car Bumper Protection, Ultimate Front Bumper Guard. Front Bumper Protection License Plate Frame. Tougher Than Steel !
Product description
NEW for 2015 the BumpShox XL features a blacked out logo for a stealth appearance and a new military tough surface texture. The BumpShix XL is our biggest and thickest front bumper guard measuring 14 inches wide and 2.25 inches thick, it is noticeably wider and taller than a standard license plate frame. The ornate arches and sharp angles enhance the look of your front bumper, while providing maximum protection from low impact parking bumps.
The BumpShox XL is a replacement license plate frame that doubles as a car bumper protector. It is designed to compliment the sculpted lines of your vehicle while offering bumper protection 24 hours a day, 7 days a week - no need to remove the bumper guard.
To attach the BumpShox XL bumper guard, simply remove the old license plate frame from the vehicle and use the existing (or included) screws to attach.
*** PRODUCT DIMENSIONS ***
14" EXTRA WIDE
8.5" TALL (Total Height With FlexFin)
2.25" THICK
*** SCREWS ARE INCLUDED ***
We include 4 screws, size # 14 x 3/4 inches long with your BumpShox. However, most standard license plate screws will work if you want to use your current screws. The BumpShox may be attached and used with 2 or 4 screws.
Please note that the standard distance between the license mounting holes is 7 inches - center to center. This is standard license plate spacing in the United States, however due to dealership handling, there may be some exceptions. Please measure the distance between mounting holes before ordering.
Note: BumpShox Will Not Work With Some Volvo vehicles because the screws on certain Volvo license plate brackets are integrated directly into the frame and can not be removed.
*** BumpShox is Intended For Use on the Front Bumper Only! It Will Not Fit the Rear Bumper Because the Flex-Fin is too tall ***
- At 14" EXTRA WIDE x 8.5" HEIGHT X 2.25" THICK - BumpShox XL is Designed To Be Taller and Wider Than a Standard License Plate Frame
- TOUGHER THAN STEEL – V-Tech All Weather Foam ** Will NOT Crack or Rust Like Metal or Plastic License Plate Frames **
- RECESSED SCREW DESIGN - No Protruding Metal Parts That Can Damage Another Vehicle's Bumper
- PYRAMID DESIGN - Steep Angles Gives the BumpShox A Sleek Appearance, Increases Product Flexibility and Maximizes Shock Absorption
- FLEX-FIN EXTENDER – This Patent Pending Feature Provides Additional Coverage to Protect the Front Bumper From Dents and Scratches When a Taller Vehicles Backs Into Your Vehicle
User questions & answers
| Question: | Is this fit my 2015 infnity Q |
| Answer: | Hello john... Indeed! U can still mount the bumber shox I too only used two screw holes for my 2008 mustang still durable holds great! |
| Question: | What is the screw length for a 2016 Subaru Forester? The #14 x 3/4" are too short between recessed hole and front bumper |
| Answer: | The bumper guard will fit all cars. License plates come in one size and so does the bumper guard. The bumper guard comes in different sizes so it's on the consumer to choice the level of protection he/she would like. |
| Question: | Toyota Solara looks like it only has two screw holes because of the round nose. Can I still use it |
| Answer: | Yes |
| Question: | Will this fit a 2014 Honda CRV |
| Answer: | Probably will, honestly I wasn't a fan of it when I got it. Didn't like the clips that fit under the wheel well. I would look into something else. |
Auto Accessories Dealer Rear Bumper Guard for Mitsubishi Outlander 2015-2019
- Fits: Mitsubishi Outlander 2015-2019, does not fit Outlander Sport
- Comes with pre-installed double sided tape
- No drilling required, textured surface provides slip resistance and channels away water
- Added protection against scuffs, nicks, scratches, and other damaging marks
- Measured, pre-cut, and precision engineered to match
User questions & answers
| Question: | How big is the shipping box? Trying to figure out if I can fly with it as checked luggage |
| Answer: | Yes it will fit |
| Question: | Will this fit the 2017 outlander sport model |
| Answer: | Yes it will also fit the 2019 |
| Question: | is this fit on 2018 Mitsubishi outlander SE |
| Answer: | I don’t really like this product, too thick and not sticky enough to stay there. |
| Question: | Will this fit a 2019 outlander sel |
| Answer: | Probably will not stick. |
Product features
Stylish & Subtle
Molded pattern with chrome trim accents to compliment existing OEM accents.
NO drilling required
Installs easily with double sided tape, please ensure the surface is clean before applying!
Custom fit for your vehicle
Each of our bumper guards is molded to specifically fit your vehicle
Auto Ventshade 2034002 Rear Bumper Protector, OE Style for 2017-2018 Ford Fusion
Auto Ventshade (AVS)
Product description
OE Style Bumper Protectors shield your vehicle's rear bumper from wear and damage caused by day-to-day loading and unloading. Unlike flat bumper plates that protect only the top surface, Auto Ventshades design is custom-fit to wrap around the vulnerable bumper lip for maximum protection. OE Style Bumper Protectors are designed to match original equipment style, with a matte black finish that's 100% UV protected to resist chalking. They install in minutes and last a lifetime, thanks to their super-secure automotive-grade 3M adhesive.
- Auto Ventshade 2034002 Rear Bumper Protector, OE Style for 2017-2018 Ford Fusion
User questions & answers
| Question: | what does it look like with trunk closed |
| Answer: | It will only fit the standard Outlander, not the Outlander Sport |
Advgears Rear Bumper Protector Guard Universal Black Rubber Scratch-Resistant Trunk Door Entry Guards Accessory Trim Cover for SUV/Cars(35.8Inch)
Advgears
Product description
Advgears Rear Bumper Protector Universal Black Guard
About the product:
- High grade anti-scrape rubber with matt surface, is soft and strong.
- Cover existing scratches and prevents your car from wear and tear, scratches paint scratches and so on.
- Decorate car appearances, make your car particular and unique
Method of installation:
1. Find the correct install position, before removing the tape protective film on the products.
2. Clean surface of Installation position to ensure that it`s clean and no oil, grease and wax and so on.
3. Pace the item on the exact position carefully,Paste the trim,press it to ensure good adhesion. Repeated pressure for stronger adhesion.
4. Please do not wash your car within 24 hours,so it can be good bond strength.
5. Please heat the adhesive tape under the item to Increase the stickiness if you have hot hair dryer. (affected by temperature)
Include:
1X rear guard bumper
1X tape
About Advgears:
Advgears store highly appreciates all customers' opinions to improve the selling, also if anything you unsatisfied, please contact our customer service department for probable best solution.Scroll up & click add to cart now!
- Great Material: This rear bumper protector is made of high quality silicone polymer material, heat /cold resistance, abrasion resistance, anti-aging, waterproof & UV resistance. Hardness 60 (Shore A), High Elongation.
- Multi-Function: The rear bumper guard effectively protect car rear bumper when loading or unloading luggages, groceries, tools box and so on, It prevents nasty scratches and provides protection. Also it can be used to cover any existing scratches, paint damage.
- Unique Design: ANTI-SLIP DESIGN of this rubber guards, groove design and non-slip function, can effectively prevent the falling of things that you temporarily put.
- Light Weight: This scratch-resistant rubber bumper guard is very durable,flexible, and bendable (will not crack or break), glue tape is coming under the trim, just stick on sill, easy to install.
- Satisfaction Guaranteed: Your purchase is fully protected when you order this rubber bumper protector today. If you have any problem, we will solve it within 24 hours.
User questions & answers
| Question: | Will fit subaru 2019 crosstrek |
| Answer: | I got gorilla glue brand tape from Lowe’s. Worked perfect. |
| Question: | Does it fit a 2015 Honda accord |
| Answer: | My daughter is currently using my Mitsubishi lancer which is the vehicle that I installed the sun. It covers the width of the trunk with about 2 inches on each side. All you do is Center it in the center of the bumper if it’s not quite long enough or you can just simply cut it. I’ve had it on the back of that car now for well over a year and it’s worked out really great. |
| Question: | There was almost no tape. What specs are spe so i may order more |
| Answer: | I don’t know I have a 2018 Jeep and it is pretty big you cut it down to fit in the back of your vehicle . I m happy with mine.... |
| Question: | What is the dimension when layed flat |
| Answer: | Yes most likely |
Auto Parts Club u800Rear Bumper Protector, Rear Bumper Guard/Universal Black Rubber Door Sill Guard for Car Pickup SUV Truck/Scratch-Resistant Boot Sill Protector,Easy D.I.Y. Installation(35.8 inch)
Product description
【Rear Bumper Rubber Guard】 Feature: 1. Protect your bumper from scuffs, nicks, and scratches by installing a Rear Bumper Protector. 2. Groove design and non-slip function, prevent the falling of things that you temporarily put. 3. Cover existing scratches and prevents your car from wear and tear, scratches paint scratches etc. 4. Perfect fit, easy installation. 5. Decorate car appearances, make your car particular and unique. easy to install: 1.Find the correct install position, before removing the tape protective film on the products. 2.Clean surface of Installation position to ensure that it`s clean and no oil, grease and wax and so on. 3.place the item on the exact position carefully,Paste the trim,press it to ensure good adhesion. 4.please don`t wash your car in 24 hours,so it can be the best bond strength. 5.please heat the adhesive tape under the item to Increase the stickiness if you have hot hair dryer.
- Cost effectively protect car rear bumper when loading unloading luggages, groceries, tools box and so on, IT prevents nasty scratches and provides ant
- High-quality rubber materials Universal fit for most of trucks, pickups or SUV
- Compatibility: 35.8inch*3.15inch ,Fit for all cars with Rear guard,Prevent the Falling of things that You Temporarily Put,Groove design and non-slip f
- High Suppleness and Durable,wearproof,last along service life,Ultra light weighted,and bendable (won't crack or break)
- Not only do Rear Bumper Protectors give your vehicle a unique look, but they also add functionality
User questions & answers
| Question: | Can anyone tell me specifically what sort of rubber this is?--edpm |
| Answer: | Slowly peel away and get goo gone when taking off the adhesive. |
| Question: | what is the thickness due to the back door opening, please |
| Answer: | Yes, there was adhesive backing. However it was not strong. I had to add additional rubber glue |
| Question: | Will this destroy the paint on my bumper if I removed it after it's been on there for awhile |
| Answer: | Sent it back. Didn't fit. |
| Question: | Is there an adhesive backing? I can't seem to peel away any backing |
| Answer: | The box we use to ship the item is 55x10x3 inches |
MATCC 32Ft(10M) Car Door Edge Guards U Shape Edge Trim Rubber Seal Protector Car Protection Door Edge Fit for Most Car
- Fitment: 32Ft(10M) long. Edge thickness: 2mm( 0.78"). Product specifications as shown in figure. These door edge guards will protect your vehicle from nicks, chips & scratches, for most universal car.
- The install place1: In the metal edge of the car body between the car door and car body. In the external edge of the car door and more.
- The install place2: Also can be use in the window above the car. Window panel minibus. Border heavy equipment. Covering the edge of the sharp metal. Vinyl window decoration boat.
- Advantages: Waterproof, isolator noise, corrosion resistance, high temperature resistance, wear resistance, anti-aging, UV resistance.
- Easy to install: Direct replacement. Just push on the rubber seal above the install place.Attention to truck/van owners, please ensure your door edge thickness prior to purchase.
User questions & answers
| Question: | The inside of my 07 Chevy Malibi has a leak due the broken foam-like seal on the inside of my door. Would this solve my problem |
| Answer: | I have it on a 96 4runner and great stuff. It conforms to all curves without buckling and doesn't come loss. Its metal covered in a textured rubber so really holds. I only noticed black but the glue on stuff comes in colors but sucks |
| Question: | Would this work for my Chevy suburban |
| Answer: | Yes, as long as it is not on a edge that people rub accrosse in general use of the boat it would likely not stay on well. If it is in a place for dock type dings/rub it should work just fine. |
| Question: | Can this fit toyota chr and what other colours |
| Answer: | About I can say is that it is fairly thick, rugged, and yet flexible. I put this on my car in December and now, March 11, it is doing great. No issues. The car has been through a number car washes. I made sure that I followed the directions really well, and I did buy quality double faced tape at Lowe's. As I recall, the tape included with the product was not very robust, so for a few bucks I bought bigger, better tape. The product looks good too. |
| Question: | Can this be used as small boat edging |
| Answer: | It’s not too thick. I didn't have any problem opening and closing the door. It’s not long enough though. |
Latest Reviews
View all
Truck Bed Storage Box
- Updated: 07.06.2023
- Read reviews
Heat Defence Sprays
- Updated: 17.06.2023
- Read reviews
Dock Ladder For Dogs
- Updated: 04.06.2023
- Read reviews
Sticker Set Of Zombies
- Updated: 22.01.2023
- Read reviews
Paint Remover For Metal Surfaces
- Updated: 25.02.2023
- Read reviews