10 best vht aluminum paint

Product description

VHT SP995 Nu Cast Aluminum High Temp (500 degrees Fahrenheit) Engine Enamel has excellent durability and superior heat and chemical resistance. It is specially formulated to withstand corrosion, rust, salt spray, chemicals and additives of today's gasoline blends and degreasers. VHT's 550 degree engine enamel is a unique blend of urethane and ceramic resins, which produce a long-lasting finish for engines, engine accessories or wherever a tough durable heat and chemical resistant finish is needed. VHT SP995 is part of a multi high performance coating system for the ultimate protection and quality. The coating system consists of surface prep, strip fast, engine primer, engine color, and engine clear. VHT engine enamel dries to the touch in 30 minutes and completely over night. VHT engine enamel only attains its unique qualities after correct curing. Curing occurs with normal engine operating temperatures or parts can be heated to 200 degrees Fahrenheit. Complete application and curing process instructions are also printed on each can.

• Excellent durability and finish
• Superior heat and chemical resistance
• Best when used with primer color paint and clear coat process
• Withstands temperatures up to 500 degrees when cured properly
• This item is not for sale in Catalina Island

User questions & answers

Question:	Will this work on gym equipment? Looking to paint my squat rack neon green. Thx
Answer:	This would have excellent adhesion on aluminum.
Question:	Has anyone had luck with the VHT clear coat enamel? Does it last and resist chemicals
Answer:	If the surface is prepared properly, it should work.
Question:	can i use this on my brake calipers
Answer:	You can paint the fire pit with the high temp paint. Go to POR-15's website and follow the instructions for prepping the surface applying the paint and curing the paint afterward.
Question:	Is it OK to use a gray primer and then use a hot pink paint over top of the gray
Answer:	No this is not gasoline resistant.
Question:	What is the red button for and the brown spike on bottom of can
Answer:	They recommend that you clean/degrease thoroughly and prime before painting. I cleaned/degreased, but did not prime. So far it is working fine.
Question:	Can I reused after I used the first time
Answer:	You can cure it in place if the object gets hot enough. I use it on motorcycle pipes. The pipes cure while you ride. If the outside of your oven gets hot...really hot; it'll cure. I'm assuming that you're painting the outside of the oven.
Question:	Is this fuel and oil resistant
Answer:	Yes it could be used. However it states on the can that it must be heated to a high temperature to cure properly. Personally I would look for a different type of paint.
Question:	Would this be appropriate for plastic parts in an engine compartment
Answer:	I painted my drum breaks with this, it been only about 4 months and now it starting to rust. I use the high heat primer and 2 coats of this spray. I would not recommend this. I will be repainting next summer. I live in New York City.
Question:	Would this work on aluminum block engines or would there be another product for that
Answer:	No, I don't think that would work. The heat shield provides a physical barrier between the muffler other parts of your vehicle to prevent damage and heat transfer from the intense heat radiating from your muffler. This product will not provide that type of protection/barrier.

Product features

2K AEROSPRAY HIGH TEMP CERAMIC ENGINE PAINT GLOSS RED

Eastwood's 2K Aerospray High Temp Engine Paints allow you to paint with the durability and precision of a two component coating without the paint gun!

• 2-Component Urethane Catalyzed Technology
• Super Durable in Extreme Conditions
• Temperature resistant up to 650 degrees F
• Sprays Like a Paint Gun

Formulated with Eastwood's proprietary technology to provide a long lasting and durable finish, while keeping its beautiful finish for years. The innovative nozzle and valve technology, combined with its two internal chambers ensure the right ratio is mixed every time. Sprays like a gun with abroader spray pattern than conventional aerosols and no mess to clean up.Temperature resistant up to 650 degrees F. Coverage approx 10 sq ft

Eastwood's 2K Aerospray High Temp Engine Paints allow you to paint with the durability and precision of a two component coating without the paint gun!Formulated with Eastwood's proprietary nano ceramic technology to provide a long lasting and durable finish, while keeping its beautiful finish for years.The innovative nozzle and valve technology, combined with its two internalchambers ensure the right ratio is mixed every time. Sprays like a gun with abroader spray pattern than conventional aerosols and no mess to clean up.Temperature resistant up to 650 degrees F. Coverage approx 35 sq ft

• Net Weight 11.7 ounces

• 10041Z PRE Painting Prep
• 12196Z Chassis Kleep
• 51483Z Rust Converter
• 12846Z Aerosol Injected Cleaner
• 11456 NIOSH N95 Respirator

• RESTRICTED SHIPPING - Due to regulations pertaining to paint recycling, at this time we are unable to ship this product to Alberta, Canada.

VHT Engine Enamel

VHT 550°F (288°C) Engine Enamels are available in a wide range of colors, including exact match factory colors. All colors have excellent durability and superior heat and chemical resistance. They are specially formulated to withstand corrosion, rust, salt spray, chemicals and additives of today's gasoline blends and degreasers.

Product description

VHT Flame Proof Coating SP117 Flat Aluminum is the color coat for the three part multi high performance coating system. VHT Flame Proof Coating will extend the life of any surface exposed to extremely high temperatures. This unique coating is a matte finish, silicone ceramic base widely used by the automotive industry on exhaust systems, and the aerospace industry for jet engines, re-entry vehicles and other high temperature applications. VHT Flameproof Coating will withstand temperatures up to 2000 degrees Fahrenheit (1093 degrees Celsius) and is ideal for use on headers, exhaust systems, or wherever an extreme temperature coating is needed. VHT provides a multi high performance coating system for the ultimate protection and quality. The system of primer, paint and clear coat finish is applied with a curing process to insure top performance. VHT Flameproof coating only attains its unique properties after correct curing. Curing can be done on the vehicle or off the vehicle by using the following steps. ON the vehicle, paint must be completely dry, run engine at idle for 10 minutes, cool for 20 minutes, run at idle for 20 minutes, cool for 20 minutes, run at normal operating conditions for 30 minutes. OFF the vehicle, paint must be completely dry before curing, heat to 250 degrees for 30 minutes, cool for 30 minutes, heat to 400 degrees for 30 minutes, cool for 30 minutes, heat to 650 degrees for 30 minutes. (CAUTION: Do not exceed the temperature of the least heat tolerant component or the base metal.) Complete application and curing instructions are also printed on every can.

• Flame proof coating extends life of high heat surfaces
• Matte finish ceramic silicone base widely used on automotive exhaust
• Best when used with primer color paint and clear coat process
• Withstands temperatures up to 2000 degrees when cured properly
• This item is not for sale in Catalina Island

User questions & answers

Question:	Will this adhere to chrome motorcycle exhaust pipes
Answer:	You use that red button at the bottom of the can to pierce the inner chamber at the bottom of the can, and it activates the 2k coating.
Question:	For inside tubing on exaust manifold, is primer application sufficient for protection without , color, VHT paint coatings
Answer:	Use within 48 hours after activating. After that it starts to activate and will not spray. Temperature may effect this time a bit.
Question:	Can I use this on a firepit to prevent rust
Answer:	Yes it is.
Question:	can this be used for arts and crafts to and not just cars
Answer:	This paint is particularly manufactured to be used on metals.

Product features

VHT flameproof Coating

VHT flameproof Coating will renew and extend the life of any surface exposed to extremely high temperatures. This unique coating is widely used by the automotive industry on exhaust systems, and the aerospace industry for jet engines, re-entry vehicles and other high temperature paint applications.

Product description

VHT SP735 Cast Aluminum Caliper Paint has been specifically designed for brake, drum, caliper, and rotor custom detailing. It is heat resistant to 900 degrees Fahrenheit and will not chip, peel, crack, fade or rust even under extremes of operation or road and weather conditions. VHT caliper paint is easy to apply, dries quickly and is remarkably resistant. Careful preparation is essential to insure proper adhesion and curing.VHT caliper paint is part of a multi high performance coating system. The coating system products consist of primer, paint, and clear coat. VHT caliper paint dries to the touch in 30 minutes and completely over night. VHT caliper paint only attains its unique qualities after correct curing. Curing occurs with normal brake operating temperatures or parts can be heated to 200 degrees Fahrenheit. Complete application and curing process instructions are also printed on each can.

• Paint has been specifically designed for brake, drum, caliper and rotor custom detailing
• Superior heat and chemical resistance
• Best when used with primer color paint and clear coat process
• Withstands temperatures up to 900 degrees when cured properly
• This item is not for sale in Catalina Island

User questions & answers

Question:	Can I just paint over existing caliper paint? I have red that’s chipping, can I just paint it black over it
Answer:	yes
Question:	Can I use this to paint a cooktop? I'm having a hard time finding high heat paint that comes in a gloss and not flat finish
Answer:	Hey Josh, Pretty much like any other Clear Coat. It does work. Should re spray a couple of coats. It will last for awhile,depending how it's used!! Hope this helps! {wolfman}
Question:	How many cans did it take to do all 4 calipers? Or is one can good enough
Answer:	Yes. I've used it on my brake calipers and it works great. Depending on how much you drive you may have to touch it up to keep it bright every so often but that's going to happen regardless of what paint you use because brake dust, etc. I use this because its high temperature.
Question:	can i use this product to heat-proof an art project trivet made of ceramic tile with decorative paper on it
Answer:	Primer of any kind will be good for a nice finish for whatever you are painting. I recommend 3 light coats of primer lightly sanded in between. When getting ready to apply you engine paint, beware, this is thick paint. It has heavy particulate matter which is the paint. I recommend that you turn the paint can upside down for 3 to 4 hours. This paint settles heavily. After several hours upside down, shake violently to get it mixed well. After that don't spray too close to your target surface. Do not spray at any temp less than 72 degrees fahrenheit, and spray evenly side to side about 5 to 6 inches, from surface.

Product features

VHT Caliper Paint

VHT Caliper Paint has been specifically designed for the custom detailing of brake components. It is heat resistant to 900°F (482°C) intermittent and will not chip, crack, fade or rust even under extremes of operation or road and weather conditions. It is easy to apply, dries quickly and is remarkably resistant. Careful preparation is essential.

Product description

VHT FLAMEPROOF Coating will renew and extend the life of any surface exposed to extremely high temperatures. This unique coating is widely used by the automotive industry on exhaust systems, and the aerospace industry for jet engines, re-entry vehicles and other high temperature paint applications.

• Headers, Exhaust Systems, Piston Domes, Inside Heads
• VHT provides a high-performance coating system for the ultimate in protection and quality
• 2 PACK

User questions & answers

Question:	Do i use a primer first
Answer:	NO
Question:	Can this be used over raw sandblasted metal/aluminum parts
Answer:	Yes it can

Product description

VHT(R) Prime Coat(TM) is an excellent foundation for any enamel, acrylic or synthetic lacquer. It provides a tough, air-dry base with excellent adhesion to intermediate and top coatings. VHT(R) Prime Coat(TM) is specially formulated to fill scratches or pin holes caused by sanding or body fillers to form a strong corrosion barrier. It is a multi-purpose product, and can be used on metal, fiberglass, masonry, wood and most plastic surfaces. It is ideal for automotive, marine, aviation, home, farm, and industrial use.

• Withstands temps up to 200°F
• Interior or exterior plastics
• Will not flake, chip or peel
• Fit type: Universal Fit

Product description

VHT's Self-Etch primer is a high performance product that etches and primes in one easy step. It features superior adhesion and is perfect for spot repairs. Can be used under all of today's automotive finishes. Ideal for most plastic, fiberglass, bare steel, aluminum and stainless steel.

• The first step in priming bare metal
• Promotes maximum paint adhesion
• Corrosion resistant
• Ideal for most plastic and fiberglass
• This item is not for sale in Catalina Island

User questions & answers

Question:	how long can it be exposed to the atmosphere on automotive sheet metal
Answer:	No! will not stick to chrome..best bet is a Jet Hot Coating from a powder coater.. This stuff does not hold up well under high heat conditions, will flake off at the hot bends of pipes
Question:	Will this work with your VHT SP5251 Plate Finish Chrome Plus
Answer:	I think it is. I have used this primer ONLY on the exhaust of one of our cars. Curing is tricky. Have to follow istructions on the primer can.
Question:	can this be used on galvanized
Answer:	Yes but any paint will do that as long as you clean the rust off . All your doing is keeping the water and air from getting to the raw metal . The high tempPaint has to be bake in an oven to 600*F
Question:	can this be used with urethane primer and/or paint
Answer:	I don't see why you couldn't use this for other applications but if your not going to be heating your crafts to over 1000* why would you need a high heat clear coat.

Product description

VHT SP183 Satin Black High Heat Wheel Paint is a polyurethane paint specifically designed for steel and aluminum wheels. VHT wheel paint provides a great finish and real protection for all standard and custom wheels. Wheels take a beating both on and off the road from sand, salt, sun, brake dust and rocks which severely damage the appearance and protection of the wheel surface. This unique product resists chipping, cracking and fading, while protecting the wheel surface from oxidation. Careful preparation is essential to insure proper adhesion. VHT wheel paint is part of a multi high performance coating system. The coating system products consist of primer, paint, and clear coat. VHT wheel paint dries to the touch in 30 minutes and completely over night. Complete application and instructions are also printed on each can.

• Aluminum high heat wheel paint is a polyurethane paint specifically designed for steel and aluminum wheels
• Superior heat and chemical resistance
• Best when used with primer color paint and clear coat process
• Withstands temperatures up to 900 degrees when cured properly
• This item is not for sale in Catalina Island

User questions & answers

Question:	How do I get a credit being my item exploded and leaked everywhere
Answer:	Put in a return and explain what happened when it was deliverd
Question:	High heat
Answer:	Designed for wheels
Question:	can I apply this paint over a epoxy primer
Answer:	Absolutely ! It's very versatile stuff! And for a wet look, I always go over the gloss black with clear gloss.
Question:	I have a toyota 4runner with just the stock 17" rims. how many cans would i need to cover all 4 wheels
Answer:	I got two for my Camry and it was enough for all 4 wheels

Product features

VHT Wheel Paint

VHT Wheel Paint provides a great finish and real protection for all standard and custom wheels. Everyday wheels take a beating both on and off the road. Salt, sand, brake dust and rocks severely damage the appearance and protection of the wheel surface. This unique product resists chipping, cracking and fading, while protecting the wheel surface from oxidation, and is available in five popular colors, plus clear coat.

Product description

Metal cast is the answer to dressing up your chrome and metal surfaces. To achieve the anodized metal look on non-metal or painted surfaces, first prime with the high heat resistant, fast drying ground coat MC 100. Then turn ordinary chrome pieces into a bright, transparent-colored metallic finish in an easy, one step process. Specially formulated to work over properly prepared shiny, bare metal, faux chrome-like surfaces for a spectacular metallic finish. Metal cast is a durable enamel finish that is oil, gas and heat resistant to 500 degrees Fahrenheit intermittently. Use it on both interior and exterior accessories-even high heat applications under the hood. Features the EZ Touch fan spray nozzle.

• PROFESSIONAL
• Metal cast is the answer to dressing up your chrome and metal surfaces
• Use it on both interior and exterior accessories-even high heat applications under the hood
• To achieve the anodized metal look on non-metal or painted surfaces, first prime with the high heat resistant, fast drying ground coat MC 100

User questions & answers

Question:	In the color selection it has "ground coat" is that needed for the actual color you want to spray? Thanks
Answer:	Its just for primer for top coat
Question:	Can this be used on a plastic surface such as a football helmet? And is this applied before the color desired or after
Answer:	You could TRY a Rustoleum plastic binding primer first and then a Rustoleum spray color that is close to what you want and THEN this paint as it is a pretty translucent color type paint.
Question:	Is it better to use this over self-etching primer when painting aluminum
Answer:	No this works as a primer I use it over steel , aluminum should be the same
Question:	Can you spray the yellow metal cast over flat black plastic
Answer:	After putting down the base coat first

Product features

Metalcast Anodized Automotive Paint

Dupli-Color Metalcast Anodized Automotive Paint turns ordinary chrome pieces into a bright, transparent-colored metallic finish in an easy one-step process. Metalcast is a durable enamel finish that is oil, gas, and heat resistant up to 500°F intermittently, making it ideal for interior, exterior, and high-heat applications under the hood. Specially formulated to work over properly prepared shiny, bare metal, and faux chrome-like surfaces.

Product description

Metal cast is the answer to dressing up your chrome and metal surfaces. To achieve the anodized metal look on non-metal or painted surfaces, first prime with the high heat resistant, fast drying ground coat MC 100 (sold separately). Then turn ordinary chrome pieces into a bright, transparent-colored metallic finish in an easy, one step process. Specially formulated to work over properly prepared shiny, bare metal, faux chrome-like surfaces for a spectacular metallic finish. Metal cast is a durable enamel finish that is oil, gas and heat resistant to 500 degrees Fahrenheit intermittently. Use it on both interior and exterior accessories-even high heat applications under the hood. Features the EZ Touch fan spray nozzle.

• Metal cast is the answer to dressing up your chrome and metal surfaces
• To achieve the anodized metal look on non-metal or painted surfaces, first prime with the high heat resistant, fast drying ground coat MC 100 (sold separately)
• Use it on both interior and exterior accessories-even high heat applications under the hood

User questions & answers

Question:	Will this spray paint work on plastic? If so, will it look shiny
Answer:	Yes you can but you should have to scrape the old paint and clean it up well before you spray it over with the black paint
Question:	will this work on wrought iron
Answer:	Hi beth, I used this on my brake calipers and my hummer h3 muffler, so far it's still there no chipping , I think this will hold on your cook top , brakes and mufflers heats up over 900 degrees , hope this help,
Question:	Will this work on flourescent lights
Answer:	I would say 2 cans for all 4. I used 1 can of black for the front 2. I applied 2 light coats. Which reminds me: I never did the rears. Make sure to clean them very good before painting. Use a wire brush to get all the dirt off first. Spray cleaner & then more wire brush.
Question:	Hi i have a an older mercedes and was looking for a bright metallic gold to paint my grille. Would yellow anodized pass as gold
Answer:	Yes thats exactly what I used it for.

Product features

Metalcast Anodized Automotive Paint

Dupli-Color Metalcast Anodized Automotive Paint turns ordinary chrome pieces into a bright, transparent-colored metallic finish in an easy one-step process. Metalcast is a durable enamel finish that is oil, gas, and heat resistant up to 500°F intermittently, making it ideal for interior, exterior, and high-heat applications under the hood. Specially formulated to work over properly prepared shiny, bare metal, and faux chrome-like surfaces.

Product description

VHT SP204 Red Wrinkle Plus Coating combines strong colors with a classic wrinkle texture for a custom look. It is temperature resistant up to 350 digress F. and is ideal for adding a touch of personal styling to almost any metal surface. VHT Wrinkle Plus resists color fading, grease, degreasers, and severe weather conditions. This tough durable wrinkle finish is extremely resistant to rust, corrosion, chipping and cracking. Careful preparation is essential to insure proper adhesion and curing. VHT Wrinkle Plus Coating is part of a multi high performance coating system. The coating system products consist of primer and paint. VHT Wrinkle Plus Coating dries to the touch in 30 minutes and completely over night. VHT Wrinkle Plus Coating only attains its unique qualities after correct curing. Curing occurs with normal engine operating temperatures or parts can be heated to 200 degrees Fahrenheit. Complete application and curing process instructions are also printed on each can.

• Coating combines strong colors with a classic wrinkle texture for a custom look
• Superior heat and chemical resistance
• Best when used with primer color paint and clear coat process
• Withstands temperatures up to 350 degrees when cured properly
• This item is not for sale in Catalina Island

User questions & answers

Question:	How much area does this cover
Answer:	Yes it works just like any other paint primer. So if you want to use this as the base primer and layer a different one on top that is okay. From what research I know it has a bit of acid in it which allows it to "self etch" into the base material. Once dry it is gone. It will have no affect on your urethane based products.