15 best can you paint aluminum rims
Painting aluminum rims is a common practice in the automotive world to enhance the appearance of wheels, provide protection against corrosion, or change their color. Here's what you need to know about painting aluminum rims:
Preparation: Before painting aluminum rims, thorough preparation is essential. This includes cleaning the rims to remove dirt, brake dust, and any existing coatings. You may need to use a degreaser or wheel cleaner to ensure a clean surface.
Surface Sanding: To promote paint adhesion, lightly sand the surface of the rims. This will create a rough texture that helps the paint adhere better. Use a fine-grit sandpaper and sand evenly across the entire rim.
Masking: Use masking tape and paper to cover the tire and any other areas you don't want to paint. Proper masking is crucial to achieving clean and professional results.
Priming: Applying a primer specifically designed for metal surfaces is essential. The primer will help the paint adhere better and provide added protection against corrosion. Spray the primer in thin, even coats, allowing each coat to dry before applying the next.
Choosing the Paint: Select a high-quality automotive-grade spray paint designed for aluminum or metal surfaces. Consider the color and finish you want for your rims.
Painting: When applying the paint, use smooth, even strokes, holding the spray can about 6 to 8 inches away from the rim. Apply several thin coats rather than one thick coat to achieve a smooth finish. Allow each coat to dry before adding another.
Drying Time: Follow the paint manufacturer's instructions regarding drying times. Typically, it takes a few hours for the paint to dry to the touch, but full curing may take several days.
Clear Coat: For added protection and a glossy finish, consider applying a clear coat designed for automotive use. Clear coat also helps to prevent the paint from chipping or peeling.
Curing: Allow the painted rims to cure completely before mounting them on your vehicle. Curing times can vary, so refer to the paint manufacturer's recommendations.
Maintenance: After painting, take care when cleaning your rims.Use a gentle car wash soap and a soft brush or cloth to avoid damaging the paint. Avoid abrasive cleaners and harsh chemicals.
Touch-Ups: Over time, rims can become scratched or chipped. You can perform touch-ups by lightly sanding the affected area, applying primer, and then matching paint.
Keep in mind that the longevity of your painted aluminum rims depends on the quality of the paint and the care you give them. Properly painted and maintained rims can enhance the appearance of your vehicle and protect the underlying aluminum from corrosion.
Below you can find our editor's choice of the best can you paint aluminum rims on the market
The Hillman Group 58069 0.556 O.D. Nylon Flanged Bushing, Numer- 3/8, 12-Pack,White
The Hillman Group
Product description
A bushing, is an independent plain bearing that is inserted into a housing to provide a bearing surface for rotary applications; this is the most common form of a plain bearing. The difference between the three types is that a solid sleeved bushing is solid all the way around, a split bushing has a cut along its length and a clenched bearing is similar to a split bushing but with a clench across the cut. A flanged bushing is a sleeve bushing with a flange at one end extending radially outward from the OD.
From the Manufacturer
A bushing, is an independent plain bearing that is inserted into a housing to provide a bearing surface for rotary applications; this is the most common form of a plain bearing. The difference between the three types is that a solid sleeved bushing is solid all the way around, a split bushing has a cut along its length, and a clenched bearing is similar to a split bushing but with a clench across the cut. A flanged bushing is a sleeve bushing with a flange at one end extending radially outward from the OD.
- For use where the strength of metal bushings is not required
- Variants fit #4 thru #10, 1/4", and 3/8" screw sizes
- Variants range 0.199" thru 0.556" in shank outer diameter
- Parts made of corrosion-resistant nylon
- Flanged construction
User questions & answers
| Question: | Does anyone know what the ID is |
| Answer: | The actual item is Ext Spring, 9/16" diameter x 6" L x .072 gauge. The maximum deflection is 3.61". |
| Question: | What is the allowable load on the bushing |
| Answer: | It is for 2 springs. |
| Question: | Are you sure the length is 3/8 ". From the image it looks longer |
| Answer: | 17 |
| Question: | How long is the bushing, what is the diameter of flange and how thick is the flange? Thanks |
| Answer: | As a long time Fallout player, I'm going to say Probably/Maybe. The whole front end of the launcher is a couple feet long (the track the "Fat Man" actually slides down before the end of the gun). I'm guessing. I ran out and grabbed a sample of this spring and it will stretch to about 15-18 in. before I didn't feel like pulling any more. It's a pretty strong spring. Please post photos if you can get this working. Disclaimer: We are not responsible for you Nuking your neighbor. P.S. I've been playing the Fallout 76 B.E.T.A. and have been having a blast even with all of it's quirks. Can't wait until next week. |
| Question: | Are both ends closed |
| Answer: | Hello, We have a 6 month limited manufacturer warranty on this item that covers any defects with the springs themselves from your date of purchase. If you purchase and want to return for a reason other than defect, we do have a 30 day return policy on that as well. |
| Question: | what is the OD |
| Answer: | The circle end of the spring attaches to the open hooks on the backside of the chair. |
| Question: | Can this be used on a french door to hang a curtain panel; needs to extend o 24 inches |
| Answer: | These are the springs only |
| Question: | HI on the 1.0 x 12'' extension spring there are 2 lengths one is 12in closed I need the max expanded length? I need to it to expand 32inches |
| Answer: | No hable Espanole. Se Habla Enlgish. the springs are located in the United States in Virginia. |
Bunting Bearings EF081010 Flanged Bearings, Powdered Metal SAE 841, 1/2 " Bore x 5/8 " OD x 5/8 " Length 7/8 " Flange OD x 1/8 " Flange Thickness (3 Pack)
Bunting Bearings
Product description
Bunting Bearings offers a complete line of stock plain bearings, flange bearings and washers made of P/M bronze. Bunting sintered bronze stock bearings have long conformed to ASTM chemical and physical properties, and are the first to include all ASTM standard sizes to ASTM recommended dimensions and tolerances. After forming, sintering and sizing, the bearings are vacuum impregnated with SAE 30 oil that provides lubricant which is metered from the bearing to the shaft during rotation. Standard off-the-shelf oil impregnated bronze bearings should function satisfactorily in temperatures ranging from 10°F to 220°F.
- Self Lubricating Bronze Bearing. SAE 30 Oil provides ideal lubrication in most applications
- Large Working Temperature Range 10 F to 220 F
- Conformance to ASTM chemical and physical properties
- Non Magnetic
- Corrosion resistant
The Hillman Group 58075 0.556 O.D. Nylon Flanged Bushing, Number-3/8, 12-Pack
The Hillman Group
Product description
A bushing, is an independent plain bearing that is inserted into a housing to provide a bearing surface for rotary applications; this is the most common form of a plain bearing. The difference between the three types is that a solid sleeved bushing is solid all the way around, a split bushing has a cut along its length and a clenched bearing is similar to a split bushing but with a clench across the cut. A flanged bushing is a sleeve bushing with a flange at one end extending radially outward from the OD.
From the Manufacturer
A bushing, is an independent plain bearing that is inserted into a housing to provide a bearing surface for rotary applications; this is the most common form of a plain bearing. The difference between the three types is that a solid sleeved bushing is solid all the way around, a split bushing has a cut along its length, and a clenched bearing is similar to a split bushing but with a clench across the cut. A flanged bushing is a sleeve bushing with a flange at one end extending radially outward from the OD.
- Use Where Strength Of Metal Bushings Are Not Required
- Also Known As A Bush
- Nylon Bushing
- Brand Name: The Hillman Group
- Because of the angle of the image, The item may look longer than it truly is.
User questions & answers
| Question: | What is the inner diameter size of the hole? What is the overall length of the item |
| Answer: | I think so. It's recommended maximum extension is 24" so your right at the end what it's rated for. |
| Question: | What are the id, od, length and od of the flange please |
| Answer: | It looks like this only extends to about 24". Starts at 12" collapsed length and has a suggested max deflection of about 12". Also suggested max load rating, if you need it, is about 35 pounds. |
uxcell Flange Bearing Sleeve 3/8 inches Bore x 5/8 inches OD x 1/2 inches Length x 3/4 inches Flange Dia. x 1/8 inches Flange Thickness Sintered Bronze Bushings
uxcell
Product description
Description:
Sintered plain bearings are made of powder-metallurgical tin bronze, which have a large working temperature range from -80 degree Celsius to 120 degree Celsius.
As good frictional property as high sliding velocity, Oiled Bearing Sleeves have a small friction coefficient about 0.12-0.18.
Oil impregnation enables very high sliding velocity and makes them suitable for rotating applications.
Sintered bronze bushings are most suitable for applications with rotating movements and where self-lubricating properties of the material are a prerequisit.
Specification:
Material: Tin Bronze
Bore Diameter: 3/8" / 9.525mm
Outside Diameter: 5/8" / 15.875mm
Length:1/2" / 12.7mm
Flange Dia.: 3/4" / 19.05mm
Flange Thickness: 1/8" / 3.175mm
Number of Item: 1 Pack
- Bore: 3/8", Outside Diameter: 5/8", Length: 1/2", Flange Dia.: 3/4", Flange Thickness: 1/8"
- Lubrication-free. Suitable for high sliding velocity operation
- Good frictional property. Maintenance-free
- Featured with good load capacity and wear resistance performance
- Wide application such as electrical equipment, household equipment, printing machinery and machine tools
User questions & answers
| Question: | is this two or more bearing sleeves? it shows as 1 pack not 1 pcs i would need two pcs. is there two pieces to a pack? Thank you |
| Answer: | It is 1" outside diameter. |
Bunting Bearings EF101416 5/8" Bore x 7/8" OD x 1" Length 1 1/8" Flange OD x 1/8" Flange Thickness Powdered Metal SAE 841 Flanged Bearings
Bunting Bearings
Product description
Bunting Bearings offers a complete line of stock plain bearings, flange bearings and washers made of P/M bronze. Bunting sintered bronze stock bearings have long conformed to ASTM chemical and physical properties, and are the first to include all ASTM standard sizes to ASTM recommended dimensions and tolerances. After forming, sintering and sizing, the bearings are vacuum impregnated with SAE 30 oil that provides lubricant which is metered from the bearing to the shaft during rotation. Standard off-the-shelf oil impregnated bronze bearings should function satisfactorily in temperatures ranging from 10°F to 220°F.
- Self Lubricating Bronze Bearing; SAE 30 Oil provides ideal lubrication in most applications^Large Working Temperature Range, 10 F to 220 F^Conformance to ASTM chemical and physical properties^Non Magnetic^Corrosion resistant
Rust-Oleum 260510 Automotive 2-in-1 Filler & Sandable Primer, 12 Oz, Gray
Rust-Oleum
Product description
Rust-Oleum Automotive 2 in 1 Filler and Sandable Primer spray paint offers a durable and long lasting base coat to enhance later painting on auto body surfaces and more. Stops Rust formula provides rust resistance while the 2 in 1 formula fills surface imperfections and primes the surface. Any angle spray and a comfort tip allow painting of hard to reach spots and reduce finger fatigue.
- Filler and sandable primer is suitable for use on wood, metal and fiberglass surfaces
- Oil based 2 in 1 paint with Stops Rust formula saves time and provides rust resistant base coat for cars, trucks, and other vehicles
- Covers up to 10 sq ft and dries to the touch (and can be recoated) in 10 minutes
- Filler and sandable spray paint fills minor surface imperfections and sands smooth
- Provides superior top coat adhesion and flat finish yields a smooth surface when sanded
- The hi-build formula fills in minor imperfections
- Sands smooth for the ultimate finish
User questions & answers
| Question: | Why is this so expensive on Amazon. It's $4.50 in stores |
| Answer: | Did you notice the earlier poster asking why its $16? Or the Compare to Similar Items which for me now shows five alternative Duplicolor products at $13-15. The price of this is highly variable. Its about supply and demand: econ 101 |
| Question: | So is regular primer not sandable or what |
| Answer: | Reg primer is sandable, but this is a filler too. |
| Question: | Can i use this on plastic? In your description says metal,wood, and fiberglass |
| Answer: | I’m not sure if you can use this on plastic. I’ve only used this in metal and wood. |
| Question: | How many cans come with this order? $16 seems really high for just one can |
| Answer: | It comes with one. It us a bit high but it is a filler and primer in one.. Meaning it not only primes it fills in minor imperfections that would show up when it comes time to. Paint. Best primer out of a can I have ever used. Hope this helps |
Dupli-Color HWP102 Graphite High Performance Wheel coating - 12 oz (2 PACK)
Dupli-Color
Product description
Dupli-Color Wheel Coating is perfect for customizing or dressing up worn out wheels. This advanced, track-tested acrylic enamel formula restores original wheel appearance and protects against brake dust, chemicals, cleaning solvents, heat, and chipping. Dupli-Color Wheel Coating features a highly durable finish with superior adhesion to steel, aluminum, and plastic wheels and wheel coverings.
- Highly reflective metallic finish
- Durable finish resists brake dust and chemicals
- Restore to original wheel appearance or customize
- Resists cracking, flaking, and peeling
- Dry to touch in 30 Minutes / Handle in 1 Hour
User questions & answers
| Question: | Is it good for curb rash |
| Answer: | Yes if the color matches |
| Question: | Does this work on alloy wheels |
| Answer: | I have alloy wheels and it worked great! After about 500+ road miles and a 10+ track hours they still look good. My wheels were getting so that power washing them did not clean them up well so paint was the option I picked. |
| Question: | How many rims did the two pack of spray cans paint? Enough for all 4 rims |
| Answer: | Yes, easily coats all four wheels. |
| Question: | Did you apply a clear coat after applying this paint |
| Answer: | not yet as I am waiting to see how the brake dust cleans off the wheels after the track days and then determine if a clear coat is needed. So far early observation is no clear coat needed. |
Dupli-Color EMC100007 Ground Coat Metal Cast Anodized Color - 11 ounce
VHT
Product description
Metal cast is the answer to dressing up your chrome and metal surfaces. To achieve the anodized metal look on non-metal or painted surfaces, first prime with the high heat resistant, fast drying ground coat MC 100. Then turn ordinary chrome pieces into a bright, transparent-colored metallic finish in an easy, one step process. Specially formulated to work over properly prepared shiny, bare metal, faux chrome-like surfaces for a spectacular metallic finish. Metal cast is a durable enamel finish that is oil, gas and heat resistant to 500 degrees Fahrenheit intermittently. Use it on both interior and exterior accessories-even high heat applications under the hood. Features the EZ Touch fan spray nozzle.
- PROFESSIONAL
- Metal cast is the answer to dressing up your chrome and metal surfaces
- Use it on both interior and exterior accessories-even high heat applications under the hood
- To achieve the anodized metal look on non-metal or painted surfaces, first prime with the high heat resistant, fast drying ground coat MC 100
User questions & answers
| Question: | In the color selection it has "ground coat" is that needed for the actual color you want to spray? Thanks |
| Answer: | Its just for primer for top coat |
| Question: | Can this be used on a plastic surface such as a football helmet? And is this applied before the color desired or after |
| Answer: | You could TRY a Rustoleum plastic binding primer first and then a Rustoleum spray color that is close to what you want and THEN this paint as it is a pretty translucent color type paint. |
| Question: | Is it better to use this over self-etching primer when painting aluminum |
| Answer: | No this works as a primer I use it over steel , aluminum should be the same |
| Question: | Can you spray the yellow metal cast over flat black plastic |
| Answer: | After putting down the base coat first |
Product features
Metalcast Anodized Automotive Paint
Dupli-Color Metalcast Anodized Automotive Paint turns ordinary chrome pieces into a bright, transparent-colored metallic finish in an easy one-step process. Metalcast is a durable enamel finish that is oil, gas, and heat resistant up to 500°F intermittently, making it ideal for interior, exterior, and high-heat applications under the hood. Specially formulated to work over properly prepared shiny, bare metal, and faux chrome-like surfaces.
USC Spray Max 2k High Gloss Clearcoat Aerosol (2 PACK)
Spray max
Product description
Spray Max 2K Glamour High Gloss Aerosol Clear. A 2 component aerosol clearcoat that is easy to apply, flows smooth and dries to a long lasting, high gloss finish.
- 2 component aerosol clearcoat that is easy to apply, flows smooth and dries to a long lasting, high gloss finish
- Easy to use aerosol. Activate, shake and spray. Unique nozzle delivers spray gun results
- Dries to a high gloss finish. Excellent weather and chemical resistance
- Pot life: 48 hours at 68 degree fahrenheit ambient temperature
- Manufacture date on can
User questions & answers
| Question: | Can this be used with duplicolor |
| Answer: | Yes but don't use duplicolor. Call around local auto paint stores and get real auto paint put into aerosol cans. Transtar is a decent one who will do this and it's better quality. My personal opinion. |
| Question: | can i use this with high gloss plastidip on a chrome grille |
| Answer: | Not sure about chrome. I would coat the chrome grill with adhesion spray first then plastidip. Apply this Spray Max in the end but make sure the adhesion and the plastidip to stick firmly first. |
| Question: | How long after applying this can I colorsand and polish |
| Answer: | Same as any other clear. Obviously depends on air temp/humidity etc. Also, the longer it dries, the harder it is, so hard to cut |
| Question: | So, i’m an artist and i resin my paintings. is this technically a resin/epoxy in a spray can? could i possibly use this on my paintings |
| Answer: | Yes it works well. I also do paintings (abstract) and used 2 part resin. The spray Max is just as good and durable. The draw back is, is once you puncture the internal can inside the main can, you only have about 48 hours to use. So you have to make sure you have a few paintings ready to go and coat them all at the same time. Also, purchase a respirator. Harbor freight has them for Les than $20. You get quite a few uses from them, then just throw away and purchase a new one. The vapors in the 2 part spray Max are not good to be inhaling. Outside is fine, but in a enclosed area is not good unless you wear a respirator. |
Dupli-Color HWP101 Silver High Performance Wheel Paint - 12 oz. (2 Pack)
Dupli-Color
Product description
Dupli-Color Wheel Coating is perfect for customizing or dressing up worn out wheels. This advanced, track-tested acrylic enamel formula restores original wheel appearance and protects against brake dust, chemicals, cleaning solvents, heat, and chipping. Dupli-Color Wheel Coating features a highly durable finish with superior adhesion to steel, aluminum, and plastic wheels and wheel coverings.
- Highly reflective metallic finish
- Durable finish resists brake dust and chemicals
- Restore to original wheel appearance or customize
- Resists cracking, flaking, and peeling
- Dry to touch in 30 Minutes / Handle in 1 Hour
User questions & answers
| Question: | is it glossy? or for Chevrolet stock wheels on a work truck |
| Answer: | you woud need a dupli clear to make it glossy |
| Question: | Will this paint work with Duplicolor Paint Shop gray primer |
| Answer: | yes |
| Question: | Can this paint be used over Duplicolor Paint shop Gray primer |
| Answer: | yes |
| Question: | Do these work well |
| Answer: | Yes, I was pleased with my results from this product. |
ACDelco GM Original Equipment 19367651 Black (WA8555) Four-In-One Touch-Up Paint - .5 oz Pen
ACDelco
Product description
The ACDelco Touch-Up Paint Tool includes a four-in-one applicator; consisting of a fiberglass cleaning and prep tool, a piston style pen-tip for small, concise fixes and a tapper tip brush applicator for larger scratches and chips. The tool offers .25 ounce of the base color and .25 ounces of a clear coat for the perfect repair. The easy-to-use tool is also fitted with a mechanical agitator to ensure color match
- Each tool contains a GM factory original color matching code that ensure an exact color match to your vehicle as the code will match the paint code listed on your vehicle
- Four in one applicator with a piston style pen tip for small fixes and a brush applicator for larger scratches and chips
- The tool’s dual applicator is perfect for a variety of uses associated with body damage caused by every day wear
User questions & answers
| Question: | i am looking for siren red touch up vin#3gcpctej6hg291619 is it available |
| Answer: | Don’t know... |
| Question: | Why is there no deep ocean blue for my 2018 Chevrolet silverado |
| Answer: | probably renamed or re formulated. check dealership for new code. |
| Question: | Will this work on a 2016 Toyota 4runner black |
| Answer: | It will work but probably will be imperfect.... |
| Question: | Is this Onyx Black |
| Answer: | My 2019 GMC Canyon is Onyx Black and the code for that is what is listed on the pen here.. #8555 Black. Which I believe you can find this number on the inside of your driver side door. I only know this because I recently bought a Snugtop camper shell and had to find out this info. |
Product features
True GM Original Equipment and More
ACDelco is the true General Motors Original Equipment parts brand, infusing a century of experience, innovation and quality into more than 90,000 GM OE and other parts.
Original Down To Our Blueprint
ACDelco parts appear in more than 2 million GM vehicles each year, which makes us the only GM parts brand to offer the same Original Equipment parts shipped for GM vehicle production.
A Professional Choice
ACDelco Professional parts are manufactured to meet expectations for fit, form and function, offering high quality and great value.
The ACDelco Advantage
Our Advantage parts provide a competitively priced, yet quality alternative to unbranded aftermarket components.
It's Our Specialty
ACDelco gold-label Specialty parts are engineered to OE expectations for exceptional applications that require enhanced performance, including police vehicles.
Chemicals
ACDelco offers a full range of oils, fluids, and vehicle care products to protect, enhance, and maintain your automobile. From adhesives, sealants, and cleaners to lubricants, waxes, and paints, ACDelco has all you need to keep your GM or non-GM vehicle looking and performing great.
POR-15 49308 Rubberized Under Coating - 22 fl. oz.
POR-15
Product description
Protects against moisture, dust, heat & cold;An excellent moisture barrier for application over auto body repairs;Effective sound barrier;Provides superior adhesion;May also be used on inside of house gutters & over flashings
- Protects against moisture, dust, heat & cold
- An excellent moisture barrier for application over auto body repairs
- Effective sound barrier
User questions & answers
| Question: | Can i use this for plastic |
| Answer: | The label says it contains Toluene and Acetone. I suspect this will melt plastic. Acetone is a pretty strong solvent. |
| Question: | Would this work on the bottom of Truck bed with surface rust |
| Answer: | Yes but you need to prime any bare metal before application per the directions on the can. POR-15 rust coating would be great to use first after removing loose rust and cleaning. |
| Question: | Will this be durable enough to paint the axel housing and rear diff on my f |
| Answer: | Yes. This is the equivalent of what modern cars are coated with in the underbody. |
| Question: | Can you spray this right over rust |
| Answer: | It is recommended that you clean and prepare the surface with a product like MetalReady prior to spraying it with POR to get the best result. Read up on how to use this product effectively and safely. If you get it on your skin, you will wear it for a week or more. It cures in humid conditions; wear a respirator prior to spraying to avoid breathing in particulates. |
Wheel Scratch Fix Quick And Easy Wheel Touch Up Kit Universal Colors (Black (Gloss))
Wheel Scratch Fix
Product description
The first and only kit for a quick fix! - Fast and easy application - All in 1 kit - No need to take your wheels off - Many universal colors for an easier match - Perfect solution to fix “curbed”wheel Simple as 1, 2, 3. it is that easy. Mask the needed area, soften the surface using our sand block, apply paint. It has never been easier to fix your wheels quickly! Save hundreds of $$$ dollars $$$ by using Wheel Scratch Fix and make your wheels look like new!
- OEM Quality Paint
- Easy 3 Steps Process
- Double Head Touch-Up Pen
- All-In-One
User questions & answers
| Question: | I have a 2018 challenger with satin carbon pearl aluminum wheels, which color would best match |
| Answer: | I just took a photo of one of my wheels and compared it to the color chart. The Color chart is second box down on the left when viewing the product on Amazon. |
| Question: | I have some Touren tf03 wheels that came with flat black powdercoat. Will this pain adhere to that surface if I rough it with a dremel sander and wire |
| Answer: | Absolutely it will bond strongly to the surface. Everything is included to prep surface before you apply the touch up paint. |
| Question: | What is the best color match for my 2012 acura tl 19 split spoke hypersilver wheels |
| Answer: | I took a picture of my wheel and compared it to the color chart that this product offers. The color chart is located on the left side of the screen when viewing the product. |
| Question: | What color match should i use on my 2018 Genesis G |
| Answer: | Great car!!!! I’m jelly! Don’t buy this product! It’s crap! If you can afford a Hyundai G80 you can afford a proper car detailing service for rim scratches |
Dupli-Color - FP101 Scratch Filler& Primer Gray, 11 oz
Dupli-Color
Product description
Dupli-Color's filler primer features a hi-build automotive formulation capable of filling deep scratches and minor surface imperfections. A fast-drying, sandable finish allows for easy featheredging while providing a smooth and rust resistant surface that promotes top coat uniformity.
- Package Dimensions: 18.796 H x 6.858 L x 7.112 W (centimetres)
- Package Weight: 0.386 kilograms
- Country of Origin : United States
- Fit type: Universal
User questions & answers
| Question: | Is this same as duplicolor '2 in 1' primer in the light grey 12oz can with orange/white text "hi-build formula"? product description says same thing |
| Answer: | yes |
| Question: | Is this Epoxy primer |
| Answer: | no. this is a enamel type sandable primer. |
| Question: | Sirve para el Nissan Sentra de color gris oscuro |
| Answer: | Sirve para cualquier color porque se usa para dar el terminado antes de pintar con el color del auto con lija muy fina tapa imperfecciones muy pequeñas |
| Question: | does 6 cans of this come with the order |
| Answer: | I ordered 2 cans individually so I can't say for sure, but judging from the price I doubt it. I think that is a mistake and this listing is a single can, not 6. |
VHT SP183 Satin Black Wheel Paint Can - 11 oz.
VHT
Product description
VHT SP183 Satin Black High Heat Wheel Paint is a polyurethane paint specifically designed for steel and aluminum wheels. VHT wheel paint provides a great finish and real protection for all standard and custom wheels. Wheels take a beating both on and off the road from sand, salt, sun, brake dust and rocks which severely damage the appearance and protection of the wheel surface. This unique product resists chipping, cracking and fading, while protecting the wheel surface from oxidation. Careful preparation is essential to insure proper adhesion. VHT wheel paint is part of a multi high performance coating system. The coating system products consist of primer, paint, and clear coat. VHT wheel paint dries to the touch in 30 minutes and completely over night. Complete application and instructions are also printed on each can.
- Aluminum high heat wheel paint is a polyurethane paint specifically designed for steel and aluminum wheels
- Superior heat and chemical resistance
- Best when used with primer color paint and clear coat process
- Withstands temperatures up to 900 degrees when cured properly
- This item is not for sale in Catalina Island
User questions & answers
| Question: | How do I get a credit being my item exploded and leaked everywhere |
| Answer: | Put in a return and explain what happened when it was deliverd |
| Question: | High heat |
| Answer: | Designed for wheels |
| Question: | can I apply this paint over a epoxy primer |
| Answer: | Absolutely ! It's very versatile stuff! And for a wet look, I always go over the gloss black with clear gloss. |
| Question: | I have a toyota 4runner with just the stock 17" rims. how many cans would i need to cover all 4 wheels |
| Answer: | I got two for my Camry and it was enough for all 4 wheels |
Product features
VHT Wheel Paint
VHT Wheel Paint provides a great finish and real protection for all standard and custom wheels. Everyday wheels take a beating both on and off the road. Salt, sand, brake dust and rocks severely damage the appearance and protection of the wheel surface. This unique product resists chipping, cracking and fading, while protecting the wheel surface from oxidation, and is available in five popular colors, plus clear coat.
Latest Reviews
View all
Human Resource Books
- Updated: 09.06.2023
- Read reviews
Haunted Flower Man Tees
- Updated: 17.01.2023
- Read reviews
Agility Equipments
- Updated: 28.06.2023
- Read reviews
Pullzall Winches
- Updated: 23.03.2023
- Read reviews
Tiger Balms
- Updated: 09.05.2023
- Read reviews