14 best automobile clear coat spray paint

Product description

Dupli-Color perfect match premium automotive paint is an easy-to-use, high-quality, fast-drying, acrylic lacquer aerosol paint specially formulated to exactly match the color of the original factory applied coating. Ideal for use on all OEM paint surfaces, perfect match is available in a complete line of exact-match colors for current and late model import and domestic vehicles, making this product ideal for both small scale vehicle touch-up and for painting vehicle accessories.

• PROFESSIONAL
• Ideal for large touch ups, vehicle accessories, motorcycles, etc.
• Apply over any factory applied finish or Duplicolor Perfect Match Premium Automotive Paint
• Features an adjustable EZ Touch 360 degree nozzle and a wide spray pattern for smooth, even coats

User questions & answers

Question:	Will this paint match a 1999 civic hatchback oem silver
Answer:	The only way to be 100% sure is look up the paint code on the driver's side door jamb, as in: http://www.automotivetouchup.com/paint-codes/honda.htm
Question:	How do you select the paint color to match your vehicle
Answer:	Get the paint code from the car VIN tag (usually under the hood or inside driver door, and go to the Duplicolor website and look up by application.
Question:	clover
Answer:	I ordered 3 cans of paint, two of them were so old that no matter how long you shook them, the paint came out in globs & they were useless. I tried to RMA the paint, but Amazon told me that I couldn't ship them back because they're flamable, but I couldn't have a refund unless I returned the product. I've had good success with dupli-color before when buying it from the Auto Parts store, but I would recommend getting it locally rather than on Amazon.
Question:	I have a scratch on my bumper will i be able to just do the area with all the products or will i have to do the entire bumper to get it to blend
Answer:	You should not have to paint the entire bumper. First, prep the area where the scratch is. Clean the entire bumper, then depending on the depth of the scratch, you may want to lightly sand and area surrounding the scratch until all is smooth. Then wipe lightly with laquer thinner. Mask off the bumper to isolate it from the car. Get Dupli-color primer and apply a few light coats. Let them dry well before applying more. This will build up the area around the scratch that you had sanded. Let the primer dry overnight. Next, get some 400 and 600 grit sandpaper (wet type) and with a wet piece of 400, sand lightly the entire primed area. Keep dipping the paper in water and don't use fingertips! Clean area with wet cloth and repeat process with 600grit wet paper and you can then sand some of the areas surrounding the primer (scuff the painted surfaces around the repair) Clean it up with damp clothes and let dry. Apply the paint in light coats in a side to side motion. Don't try to cover the primer too fast. Light coats work best and allow dry time in between coats. Eventually the primer will be covered and some of the new paint will then overlap the original paint on bumper (this is part of the blending process) Once all is covered and you cannot see the primer under the paint, let it dry overnight.Next day, get some 1000 grit wet paper and sand the entire repair area lightly. This will help smooth out the new paint. Dont sand too hard so as to make the primer exposed. Sand beyond the new paint so as to scuff up the old untouched paint on the bumper. You are getting the surrounding area ready for the clear cloat blend.Wipe with clean wet cloth and when thoroughly dry you can apply the dupli color clear coat using the same light coat, overlap method. Now you will want to go beyond the repair area bringing the clear coat into the original painted surfaces by a few inches all around. Let the clear coat dry in between coats. Once clear is applyed, let it dry overnight. Next day you can wet sand the entire repair area with 1000 wet paper. Remember, no finger tips. Use your palm or get a sanding block but go lightly. Once you have finished sanding, wipe clean with wet cloth and then polish with Light polishing compound. You can do this by hand if you dont have a buffer. It may sound complicated, but that's a process that will give you the best results outside of going to a body shop. Another consideration, if the scratch is small, get a bottle of duplicolor touch up. It has the brush built in and you can possibly just carefully use the brush and paint to fill in the scratch. I hope this helps!

Product features

Perfect Match Premium Automotive Paint

Dupli-Color Perfect Match Premium Automotive Paint is an easy-to-use, high-quality, fast-drying, acrylic lacquer aerosol paint specially formulated to match the exact color of the original factory applied coating. Ideal for use on all OEM paint surfaces, Perfect Match is available in a complete line of exact-match colors for current and late model import and domestic vehicles, making this product ideal for both small scale vehicle touch-up and for painting vehicle accessories.

Product description

? Spray Max 2K Glamour High Gloss Aerosol Clear. A 2 component aerosol clearcoat that is easy to apply, flows smooth and dries to a long lasting, high gloss finish ? 2K clearcoat in an easy to use aerosol ? Activate, shake and spray ? Unique nozzle delivers spray gun results ? Dries to a high gloss finish ? Excellent weather and chemical resistance ? Color: Clear liquid (as packaged) ? Mix: Ready to spray. Activate, shake and spray ? Substrate: Properly applied basecoats ? Suggested Use: For use over all basecoats.

• Spraymax 2k Glamour High Gloss Aerosol Clear Part # 3680061
• Lasting high gloss
• Very good polish ability
• Maximum resistance to abrasion and scratching
• Manufacture date on can

User questions & answers

Question:	Painted alloy wheels with duplicolor wheel coating (hwp101 silver), is this clear coat compatible, any special application instructions
Answer:	I would recommend using duplicolor # hwp103 for wheel clear because of high heat temperature
Question:	Can this product be applied over existing clear coat with out sanding. If so what do I clean surface clear coat with before applying
Answer:	If using over existing clear, you MUST wet SSN the existing clear with 800-1000 grit. These very fine scratches will be filled with the new clear coat - failure to sand will result in failure and eventual peeling of the clear coat - the new clear needs a surface to bite into.
Question:	can i use it my my plastic headlights, and if so, do i need an adhesion promotor
Answer:	I sanded with 1000 grit and the clear coat filled the lines in very well. I had previously used Meguires headlight clearcoat and sanded with 2500, but the lines were still visible after 2 coats - it also turned yellow and started to peel after 4 months. I sanded all the Meguires off prior to using the 2k to avoid any lifting problems. They looked great after 2 coats. Beware the overspray! I should have covered my whole car with a drop cloth.
Question:	What type of clearcoat is this? Acrylic/Enamel/Laquer
Answer:	Acrylic. Word of caution. Make sure that you apply a very light coat at first, followed by a second coat a little heavier, followed by an EVEN third wet coat. If you end up with a run DO NOT TRY TO FIX IT UNTIL THE CLEAR COAT IS COMPLETELY DRY!! Then use a new single edge razor blade to scrape any runs. If you have a speck of dust or a bug, gently remove then using a clean cotton swab, dab a drop of clear coat over the "hole" and let it merge into the void. Also, once you puncture the internal can, you only have about 2 hours before the product solidifies in the can.

Product description

Spray Max 2K Glamour High Gloss Aerosol Clear. A 2 component aerosol clearcoat that is easy to apply, flows smooth and dries to a long lasting, high gloss finish.

• 2 component aerosol clearcoat that is easy to apply, flows smooth and dries to a long lasting, high gloss finish
• Easy to use aerosol. Activate, shake and spray. Unique nozzle delivers spray gun results
• Dries to a high gloss finish. Excellent weather and chemical resistance
• Pot life: 48 hours at 68 degree fahrenheit ambient temperature
• Manufacture date on can

User questions & answers

Question:	Can this be used with duplicolor
Answer:	Yes but don't use duplicolor. Call around local auto paint stores and get real auto paint put into aerosol cans. Transtar is a decent one who will do this and it's better quality. My personal opinion.
Question:	can i use this with high gloss plastidip on a chrome grille
Answer:	Not sure about chrome. I would coat the chrome grill with adhesion spray first then plastidip. Apply this Spray Max in the end but make sure the adhesion and the plastidip to stick firmly first.
Question:	How long after applying this can I colorsand and polish
Answer:	Same as any other clear. Obviously depends on air temp/humidity etc. Also, the longer it dries, the harder it is, so hard to cut
Question:	So, i’m an artist and i resin my paintings. is this technically a resin/epoxy in a spray can? could i possibly use this on my paintings
Answer:	Yes it works well. I also do paintings (abstract) and used 2 part resin. The spray Max is just as good and durable. The draw back is, is once you puncture the internal can inside the main can, you only have about 48 hours to use. So you have to make sure you have a few paintings ready to go and coat them all at the same time. Also, purchase a respirator. Harbor freight has them for Les than $20. You get quite a few uses from them, then just throw away and purchase a new one. The vapors in the 2 part spray Max are not good to be inhaling. Outside is fine, but in a enclosed area is not good unless you wear a respirator.

Product description

The Dupli-Color Scratch Fix All-in-1 touch-up tool features an abrasive prep tip, exact-color match paint, and clear coat. We are the only brand with colors tested and approved by vehicle manufacturers for a perfect match to the original factory finish when restoring that scratch or chip. The New Scratch Fix All-in-1 tool helps you fix it easy and fix it right in your garage.

• Fit type: Vehicle Specific
• PROFESSIONAL
• The Dupli-Color Scratch Fix All-In-1 Touch-Up Tool Features An Abrasive Prep Tip, Exact-Color Match Paint, And Clear Coat
• Part number: DA1692

User questions & answers

Question:	Is this clear resistant to gasoline if it is spilled on it
Answer:	No I spilled some on my tank and it yellowed an peeled
Question:	Hi, can this product be used on Plastic Headlights? Thanks
Answer:	It kind of depends on what you're doing with the headlights. As stated here if you're doing a standard restoration kit to remove the normal yellowing in the headlight's plastic lens, those kits do not come with a process to clear coat afterwards. In general terms though, if you want to clear coat the lens you're just adding clear protective layers to the lens and have the added benefit that if you then get a scratch you simply have to hit it again with some sandpaper and apply a new coat to "remove" the scratch. If you use a fine grit sandpaper (800 - 1200) to scuff the lens in order to hold the clear coat you'll be fine and would never use any type of primer in this instance. I have to say I have not used this on headlights but I "smoked" my tail lights with VTH Nightshades and then clear coated over that with this and it turned out great. I also have to say though that I only got a little over a year out of it before the clear coat started to yellow and the Nightshades started to lighten up so just using a headlight restoration kit may keep the yellow off longer, I've just never used one to know for sure.
Question:	I used a dupli-color clearcoat with da1692 code. but can looked different and it said "clearcoat". is this the same clearcoat or is it different
Answer:	Yes this is clear coat and this clear coat is a paint which gives glows 'shine' to the existing paint surface. (I have bought one of these and tried to use it on my car's bumper and it really messed up) I recommend to try on any old paint surface before using on main body
Question:	Would i be able to apply this over my hood after i paint it
Answer:	That is the purpose but I would not recommend it. It wants a week between coats or it will orange peel. Try a lacquer instead. You can build up coats to match the gloss level.

Product features

Premium Acrylic Enamel

Dupli-Color Premium Acrylic Enamel is a no sanding, paint and primer in one with excellent adhesion to plastic and maximum rust resistance. This advanced high-solids formula bonds to a variety of surfaces while delivering excellent durability for the most demanding projects. Ideal for: all metals, plastic, wood, fiberglass, masonry and concrete.

Product description

Rust-Oleum Automotive 257884 11-Ounce Enamel Spray, Gloss Clear

• For indoor/outdoor use
• Wide fan delivers smooth, professional appearance
• Excellent UV and weather resistance
• Superior color and gloss retention
• Great for touch-up projects

User questions & answers

Question:	Can this spray can clear coat be used over hvlp spray gun applied color base coat
Answer:	I believe that it would do just fine. I use it for my custom crank bait, (or fishing lures) and it works great.
Question:	Dry time between coats? Can it be lite sanded and buffed to mirror quality? Will it work for final of a painted guitar
Answer:	Yes on sanding. Wet sanding is best.and mirror quality is up to the painter and sander.it is very good tough paint from a can.
Question:	How scratch-resistant is this clear coat
Answer:	It’s a good product. I cleared coat the tank on my FLHTC and front bumper of my F150 and it has stood up well. I put at least 4 coats. It’s the only thing that worked to resist gasoline spills on the fuel tank after using other products.
Question:	does this work on existing small exterior chips in the paint of my car? To keep them from spreading or
Answer:	I’m not sure but I’d say no.

Product features

Rust-Oleum Automotive 257884 11-Ounce Enamel Spray

Apply vibrant, lasting color to your vehicle or other metal surfaces with Rust-Oleum Automotive Enamel Spray. This product features an extra-wide fan spray that delivers a smooth, professional finish—with outstanding color and gloss retention. Great for touch ups.

• Indoor/outdoor
• Gloss, semi-gloss or flat finish
• UV- and weather-resistant

For Best Results

Apply multiple light coats vs. one heavy coat.

Product description

Dupli Color's acrylic lacquer offers exceptional quality in general purpose paint and primers. The EZ touch fan spray nozzle ensures consistent results and ease of use

• Acrylic lacquer
• High gloss
• Easy recoat
• EZ touch patented fan spray nozzle
• This item is not for sale in Catalina Island

User questions & answers

Question:	Kia soul 2010 says color on door inside is 1d? my car is obvi white so is this going to match? what color is 1d for white
Answer:	It will march
Question:	can I apply this clear coat to an interior car part that I painted with acrylic enamel stage one? it won't crack at some point
Answer:	No and don’t use enamel it won’t stick to interior
Question:	can you use this product on small solar panels for fences
Answer:	No
Question:	Hi can this product be used on Plastic Headlights? Thanks
Answer:	No, definitely not. It doesn't react well to heat.

Product description

Rust-Oleum High Heat is a tough protective enamel that renews and protects surfaces subject to heat up to 2000-Degree F (1093-Degree C). This rust-preventive formula is ideal for automotive parts and more.

• Resists heat up to 2000-Degree F
• Gas and oil resistant
• Stops Rust formula
• Any-angle spray with comfort tip
• Resists oil, gas, grease, rust, salt, humidity and solvents

User questions & answers

Question:	One review says it must be "baked". how long at what temp? thank you
Answer:	Warm or hot weather temperature during the daylight is fine. Not recommended in the cold / rainy weather day, the moisture in the air will settle on the pure metal & paint contact. Bake is the professional automotive body painters, to get rid of moisture in the metal's pour, better metal & paint contact. Best judgement, or YouTube it. Be safe, have fun.
Question:	Can this be used to spray brake parts such as rotors
Answer:	Use Rust-Oleum® Caliper Paint for brake parts including rotors.
Question:	How glossy it is
Answer:	The Amazon listing shows "Rust-Oleum Automotive 260771 11-Ounce 2000 Degrees High Heat Spray, Gloss Clear", however, it also says MATTE???? So which is it, glossy or matte?
Question:	I do folk art painting on enamel on steel tea kettles. Can I use this on my kettles to protect the enamel paint from the heat from stove use
Answer:	Rust-oleum will hold up but I wold have major concerns for the paint underneath the Rust-oleum, which would deteriorate quickly under the heat.

Product features

Rust-Oleum Automotive 260771 11-Ounce 2000 Degrees High Heat Spray

Keep extra-hot exhaust manifolds, headers looking extra sleek with Rust-Oleum Automotive High Heat Spray. This flat, protective enamel bonds to bare metal and withstands intermittent temperatures of up to 2000°F (1093°C).

• Resists heat up to 2000°F
• Gas & Oil Resistant
• Stops Rust formula
• Any-Angle Spray with Comfort Tip

For Best Results

Use with Rust-Oleum High Heat Primer Spray.

Product description

Spray Max 2K Glamour High Gloss Aerosol Clear. A 2 component aerosol clearcoat that is easy to apply, flows smooth and dries to a long lasting, high gloss finish. 2K clearcoat in an easy to use aerosol. Activate, shake and spray. Unique nozzle delivers spray gun results. Dries to a high gloss finish. Excellent weather and chemical resistance. Manufacture date on can WARNING: This product can expose you to chemicals which is [are] known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

• 2 component aerosol clearcoat that is easy to apply, flows smooth and dries to a long lasting, high gloss finish
• Easy to use aerosol. Activate, shake and spray. Unique nozzle delivers spray gun results
• Dries to a high gloss finish. Excellent weather and chemical resistance
• For use over all basecoats
• Manufacture date on can

User questions & answers

Question:	How would this stuff work for wood finishing
Answer:	It should be fine. It's a catalyzed material, so it pretty much works on everything. You have to spray subsequent coats while the first coat is still tacky.
Question:	Is this stuff Urathane? Epoxy or Enamel
Answer:	It's a 2k urethane clearcoat. It is compatible with enamels so long you apply it within 1 hour of the enamel top coat or after it has completely cured which can take weeks/months. If you clear coat on top of enamel that hasn't fully cured, it will wrinkle. I've always sprayed 2k urethane clear coat within 30-40 minutes after applying the last top coat. Never had an issue with wrinkling.
Question:	Is there a time limit the moment you press the tab in the bottom
Answer:	After your first coat, put the can in the freezer which can extend the working life by several days. Allow the can to warm up to room temperature before spraying the next coat. One user here was able to extend the working life of a can up to about a month by doing this. Otherwise at 68-degrees, the mfr says the can will go stale after 48hrs and no longer work properly.
Question:	Has anyone used this over Duplicolor Perfect Match paint
Answer:	Everything that people said on here is not wrong but it is a bit not needed. The trick to avoid all the steps and days of dry time is if you are going to use a rattle can for your base coat you need to use a FLAT color!! Not semi gloss not satin but flat. Once you clear it then it will be supper glossy but the reason everyone has so much trouble is gloss paint is almost like a plastic coating. A solid sheet to where flat is like a sponge if you were to look at it super up close. The gloss will actually try and repel the clear where flat will soak it in. Spray your color one tack coat, just a mist basiclly. Let dry 15 min do another med wet coat, flash 15 minutes again then another med wet coat and let sit about 30 minutes then go over it with the clear but just a very light tack coat. Let that sit 20 minutes then do med wet over that, 20 minutes, then do your wet coat to get your finsh you need and dont worry about dust or runs because you can cut and buff this clear and get rid of all that once it sets up. Avoid that if you can of course but not a big deal if it happens. The dirt or runs in the clear i mean. Base coat for automotive use is flat before you top coat it so ya. I have done this method more times then i can count and it works awesome!!

Product description

DupliColor's Paint Shop Finish system allows you to create a high-quality finish when using the primer, color and clear. It's a high-quality lacquer system designed for automotive and motorcycle applications. Paint Shop is easy to apply, dries quickly and can be buffed to a brilliant smooth finish. It's a ready to spray system, so no mixing or reducing is required. With no re-coat window, additional coats can be applied at any time

• Pre-reduced, ready-to-spray lacquer
• No mixing or reducing required
• Easy to apply and dries quickly
• No recoat window, reapply at any time
• Must be clear coated
• Wet sands easily
• Ideal for automotive exterior body projects

User questions & answers

Question:	Do they have more colors
Answer:	Yes white, blue, green, orange. Google Dupli-color paint shop.
Question:	Would need the base coat metallic silver for candy blue
Answer:	Depending on the effect you want
Question:	Can I apply this to plastic parts
Answer:	Yes, I used it on my overhead plastic luggage compartment for my vehicle. Works great No pealing if it’s applied properly. Good quality product.
Question:	will this jet black paint work for paint motorcycle frame and using paint brush
Answer:	It will work for a motorcycle frame, but I wouldn't use a brush, use a spray gun. Be patient and follow the instructions, and you can get a really great result!

Product features

Paint Shop Automotive Lacquer Finish System

Dupli-Color Paint Shop Automotive Lacquer Finish System gives you everything you need to create a high-quality DIY finish - primer, color and clear. Paint Shop is a high-quality lacquer system designed for automotive and motorcycle applications that is easy to apply, dries quickly and can be buffed to a brilliant smooth finish. Paint Shop is a ready-to-spray system that requires no mixing or reducing, and with no re-coat window, additional coats can be applied at anytime.

Product description

U. S. Chemical & Plastics SprayMax 2K Glamour High Gloss Aerosol Clear USC-3680061 2K clearcoat in an easy to use aerosol Activate, shake, and spray Unique nozzle delivers spray gun results Dries to a high gloss finish Excellent weather and chemical resistance WARNING: This product can expose you to chemicals which is [are] known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

• 2 component aerosol clearcoat that is easy to apply, flows smooth and dries to a long lasting, high gloss finish
• Easy to use aerosol. Activate, shake and spray. Unique nozzle delivers spray gun results
• Dries to a high gloss finish. Excellent weather and chemical resistance
• For use over all basecoats
• Manufacture date on can

User questions & answers

Question:	Can you use it over rustoleum base coat
Answer:	You can. I sprayed the clear coat immediately after spraying the rustoleum base and it turned out great.
Question:	Does this product provide any UV protection
Answer:	Yes this is a high quality clear with UV Protection
Question:	does this paint react to gasoline
Answer:	My experience after cured will stand up to lacquer thinner- rag clean up. (not soaking in it) Just did a gas tank area on a trike and haven’t had a reaction yet... Be sensible
Question:	How long do you have to use a mixed can? How soon after a coat can you sand that coat? Or, is it best to repeat coats while still a bit wet? 20 min
Answer:	This is a 2=part spray paint that requires activation of the product in order to use it. Shelf life lis like any other spray paint can. Once you activate the product, then you have about 2-5 days of before the the spray paint hardens in the can. Results depend on temperature, humidity, etc. Takes about 15min for the clear coat to flash, then you can recoat if necessary . I would wait 24hrs before sanding the coat. Just like any urethan paint, a proper cure time is necessary to achieve best results.

Product description

When you spend hours on a DIY or craft project, make sure it lasts. Krylon COLORmaxx Acrylic Clear Spray Paint provides adhesion, durability and a non-yellowing, gloss finish. It can be used on wood, metal, wicker, most plastics, glass, plaster/ceramic, fabric, paper and more. It’s a must-have to keep with DIY supplies and in a craft, art or tool kit, to change the sheen or add extra projection to a variety of projects, including craft foam. Krylon COLORmaxx can be used on a wide variety of projects, indoors and outdoors. It dries to the touch in 20 minutes or less and is dry to handle in 1 hour. Recoat window is within 4 hours or after 24 hours. The spray any way capabilities mean it can be sprayed from any angle, and the spray paint can features a big button spray tip. One 12 oz. aerosol spray paint can cover up to 15-20 sq. feet. Krylon spray paint has been trusted by consumers since 1947. We offer a wide selection of spray paint products to help restore, refresh and recolor any project. With Krylon, today we spray. Application conditions: best results when temperatures are 55 to 75 degrees and humidity is below 60%. Applying outside this range may impact finish. Clean up with a lacquer thinner.

• NON-YELLOWING FINISH SPRAY PAINT – Krylon COLORmaxx Acrylic Clear Spray Paint provides premium adhesion, durability and a non-yellowing, gloss finish. It can be used on wood, metal, wicker, most plastics, glass, plaster/ceramic, fabric, paper and more.
• INDOOR/OUTDOOR PROTECTION – From furniture to DIY decor items, make sure your craft and DIY projects can stand up to the elements and last with this protective, non-yellowing finish. The finishing touch is always a protective coat!
• NON-YELLOWING, CLEAR FINISH –This gloss clear spray paint is a non-yellowing, clear finish that offers added protection or a change to the sheen for a variety of projects. It’s craft foam safe and a must-have to keep with DIY supplies and in a craft, art or tool kit.
• EASY USE – The easy push big button spray tip on this all-purpose spray paint can helps you spray any way, even upside down. Dry to the touch in 20 minutes or less for fast coverage to get projects done. 12 oz. can spray paint covers up to 15-20 sq. feet.
• AMERICA’S FIRST SPRAY COATING – Krylon spray paint has been trusted by consumers since 1947. COLORmaxx features the widest color offering in the Krylon product family, to help restore, refresh and recolor any project. With Krylon, today we spray.

User questions & answers

Question:	Can this be used for spraying painted rocks to seal them for leaving outside
Answer:	Not sure about this product since I have not used it. I would use a spray polyurethane and apply it in a number of coats. It made yellow a little bit with time. I make totems with glass and wood and use spray polyurethane often and it holds up well so far outside.
Question:	Can i use this spray paint on my sons cranial helmet
Answer:	Ok, I just read the garb on the can that I bought and it does not say it is safe for childrens toys. I use that as an indication that it is probably not safe to have in skin contact or be used on something that could possibly come in contact with the mouth if the paint was to peel off. A lot of paint cans say - suitable for childrens toys, if I was you I would look for one that states that, then it should be your best option for the helmet. My thoughts only.
Question:	Would this work with shoes
Answer:	no i wouldn't advise putting spray paint on shoes lol!!
Question:	At this price, is it a case of 12 cans
Answer:	No, it's only one. The cans are all different prices depending on the color you get. Some cans are more expensive than others, for instance the Dover White is over $16 but it's still only one can. I don't know why the prices vary so greatly.

Product description

Auto Body Clear is easy to apply and dries quickly. No recoat window limitations means additional coats can be applied at any time.

• Acrylic lacquer clearcoat fomulation
• Seals and protects
• Ready to spray system
• Stops Rust formula
• Can be buffed to a high gloss finish

User questions & answers

Question:	Do you have to thin or add anything additional to the acrylic jet black paint? This is ofcourse assuming that primer has already been applied
Answer:	MOST ACRYLIC PAINT NEEDS REDUCED WITH ACRYLIC LACQUER THINNER 1 & 1/2 TO 1----- THE RUSTOLEUM CLEAR IS SUPPLIED AT SPRAYING CONSISTENCY
Question:	how many cans of this would i need to cover a small sedan for the base paint in jet black
Answer:	One gallon should be enough a light coat and a heavy coat, if the gallon come with a hardener.
Question:	Is this a water basepaint
Answer:	No, solvent based
Question:	Can the rustoleum autmotive primer be sprayed with a hvlp spray gun or does it require additional thinning? If so what can i thin it with? Thanks
Answer:	It can be sprayed with the hvlp spray gun, no issues

Product features

Rust-Oleum Automotive 32-Ounce Autobody Paint Quart

Auto Body Clear is easy to apply, dries quickly and can be buffed to a brilliant finish. No recoat window limitations means additional coats can be applied at any time.

• Acrylic Lacquer Clearcoat fomulation
• Seals and protects
• Ready to Spray System
• High Gloss Finish

For Best Results: Can be buffed to a high gloss finish

Product description

POR-15 Gloss Clear Top Coat aerosol is a direct-to-metal (DTM) paint designed to work incredibly well in all applications where there is a need to help preserve substrates susceptible to corrosion. Under exterior exposure POR-15 Top Coat has exceptional long-term sheen and color retention. POR-15 Top Coat can be applied directly to metal substrates or previously painted surfaces, with no need for a primer or undercoat, and is formulated to form a robust barrier that sheds moisture to provide long-lasting protection. POR-15 Top Coat provides excellent adhesion and when used over POR-15 Rust Preventive Coating, works to provide a permanent barrier to corrosion.

• Direct to Metal (DTM) Rust Preventive Paint
• No Need for Primer or Undercoat
• Use over POR-15 Rust Preventive
• UV resistant
• Flash Point: 41.00

User questions & answers

Question:	Would 1 can be enough for an F-150 driveshaft & rear axle
Answer:	I would think so. I did the bottom of a pickup truck bed which was about 4' by 6 1/2' (1 coat). It covered very nice
Question:	Is this product Moisture-cure li
Answer:	Moisture speeds cure but overnight is always required. The volatiles have to gas-out.
Question:	What kind of coverage can be expected from one can
Answer:	I would estimate 30 to 40 square feet per 14oz can
Question:	Is this a spay can application? How much space will it cover
Answer:	This is a spray application. For me it did around 8-12 square feet two times. It is recommended to do two coats.

Product features

POR-15 Top Coat DTM Paint

POR-15 Top Coat paint is a DTM ( direct-to-metal ) coating designed to work on prepped bare metal and work incredibly well in all applications where there is a need to help preserve substrates susceptible to corrosion. POR-15 Top Coat safety colors comply with OSHA required/recommended color codes for marking physical hazards and designating caution, to include protective equipment. Under exterior exposure POR-15 Top Coat has exceptional long-term sheen and color retention. POR-15 Top Coat can be applied directly to metal substrates or previously painted surfaces, with no need for a primer or undercoat, and is formulated to form a robust barrier that sheds moisture to provide long-lasting protection. POR-15 Top Coat provides excellent adhesion and when used over POR-15 Rust Preventive Coating, works to provide a permanent barrier to corrosion.

Product description

Spray Max 2K Glamour High Gloss Aerosol Clear. A 2 component aerosol clearcoat that is easy to apply, flows smooth and dries to a long lasting, high gloss finish.

• 2 component aerosol clearcoat that is easy to apply, flows smooth and dries to a long lasting, high gloss finish
• Easy to use aerosol. Activate, shake and spray. Unique nozzle delivers spray gun results
• Dries to a high gloss finish. Excellent weather and chemical resistance
• For use over all basecoats
• Pot life: 48 hours at 68 degree fahrenheit ambient temperature
• Manufacture date on can

User questions & answers

Question:	How many cans is needed to fully clearcoat an entire rear bumper
Answer:	it depends how big is the bumper and how many coats would you do but 2 cans should be plenty
Question:	Is it only good for 48 hours after you pop the bottom? Of you dont pop the bottom(activate it)? how long is the shelf life if you dont activate it
Answer:	Correct. It's only good up to 48 hours once mixed and likely less. There isn't really that much in each can though so using it all in 1 day was never a problem for me. If anything I found 1 can was never enough. Now I buy a few cans at a time.
Question:	Could this spray be used to protect a deep scratch on a car? I’m trying to find a product that will prevent rust and protect the car through winter
Answer:	Likely, you are better off filling the scratch in with some filler/bondo if its really thick, sanding to make everything even, spraying it with primer/urethane paint, and then clearing it with 2K clear..
Question:	How many cans for the whole car
Answer:	Hypothesis 30 cans. You have to think of more than one coat, possibly two, but three is better. You also have to compensate for the blending, there will be areas that seem to slightly differ and will need to be blended, smoothed out. Every time the can empty's out, it will cause variances which will need attention to blend. Now, If you just wish you car too look better and don't need a professional look, you can probably go with about 20 cans. I'm basing my answer on the coats i have used on my cars, the hood on one, the trunk on the other and the rail above the driver side window from hood to trunk. One thing that has happened to my cars on the trunk it rained and I had to sand it all off and start again. on the rail, It didn't hold too well and in less than a year started to peel. I did do two coats on the cars. Hopefully this information has helped.