14 best automotive clear coats

Product description

? Spray Max 2K Glamour High Gloss Aerosol Clear. A 2 component aerosol clearcoat that is easy to apply, flows smooth and dries to a long lasting, high gloss finish ? 2K clearcoat in an easy to use aerosol ? Activate, shake and spray ? Unique nozzle delivers spray gun results ? Dries to a high gloss finish ? Excellent weather and chemical resistance ? Color: Clear liquid (as packaged) ? Mix: Ready to spray. Activate, shake and spray ? Substrate: Properly applied basecoats ? Suggested Use: For use over all basecoats.

• Spraymax 2k Glamour High Gloss Aerosol Clear Part # 3680061
• Lasting high gloss
• Very good polish ability
• Maximum resistance to abrasion and scratching
• Manufacture date on can

User questions & answers

Question:	Painted alloy wheels with duplicolor wheel coating (hwp101 silver), is this clear coat compatible, any special application instructions
Answer:	I would recommend using duplicolor # hwp103 for wheel clear because of high heat temperature
Question:	Can this product be applied over existing clear coat with out sanding. If so what do I clean surface clear coat with before applying
Answer:	If using over existing clear, you MUST wet SSN the existing clear with 800-1000 grit. These very fine scratches will be filled with the new clear coat - failure to sand will result in failure and eventual peeling of the clear coat - the new clear needs a surface to bite into.
Question:	can i use it my my plastic headlights, and if so, do i need an adhesion promotor
Answer:	I sanded with 1000 grit and the clear coat filled the lines in very well. I had previously used Meguires headlight clearcoat and sanded with 2500, but the lines were still visible after 2 coats - it also turned yellow and started to peel after 4 months. I sanded all the Meguires off prior to using the 2k to avoid any lifting problems. They looked great after 2 coats. Beware the overspray! I should have covered my whole car with a drop cloth.
Question:	What type of clearcoat is this? Acrylic/Enamel/Laquer
Answer:	Acrylic. Word of caution. Make sure that you apply a very light coat at first, followed by a second coat a little heavier, followed by an EVEN third wet coat. If you end up with a run DO NOT TRY TO FIX IT UNTIL THE CLEAR COAT IS COMPLETELY DRY!! Then use a new single edge razor blade to scrape any runs. If you have a speck of dust or a bug, gently remove then using a clean cotton swab, dab a drop of clear coat over the "hole" and let it merge into the void. Also, once you puncture the internal can, you only have about 2 hours before the product solidifies in the can.

Product description

SHERWIN WILLIAMS FC 720 ULTIMATE CLEARCOAT AUTOMOTIVE USE QUART SIZE KIT

• Clearcoat finish with ultra-quick 30-minute force dry time
• Protects your car from fading due to sun exposure, and makes your car shine like it is brand new
• With only 2 applications of Ultimate Overall Clearcoat, refinishing your car has never been easier
• Buffering can start 24 hours after application of the clearcoat
• Finish 1 Hardener aids in the curing process, while also delivering added protection to the surface

User questions & answers

Question:	Is it heat resistant? Can i apply it to engine parts
Answer:	Probably it is not heat resistant, so our suggestion don't apply to engine parts. There are enamel engine paints in the market that you can safely use.
Question:	I just painted using acrylic enamel with clear in it can I use fc720 for better shine
Answer:	Yes Adam......Fc720 will boost the shine if you ........since you have clear in the base.....scuff with 1000 grit before applying pure Clear
Question:	refraze my question I want to use this to clear coat a 55 chevy original paint with out anything else will it work
Answer:	It will, but try a small spot first, sometimes a catalyzed product will lift an uncat product. I think it will be fine
Question:	Can this be used on head lights
Answer:	If you wet sand with 1000 grit and use a flex additive , you can great short term fix but eventually, any urethane clear will peel. Use a good rubbing compound and a lot of elbow grease to solve problems with yellowing plastic lenses. Avoid any kind of coatings. If lenes are really bad replace them.

Product description

Spraymax Clear Coat Bundled with Moshify Spray Gun

• Professional Results - Built by professionals for professionals and so easy anyone can use it. Giving you all the results of a high end spray booth without all the expensive equipment. It's no wonder Spaymax is quickly becoming one of the most recommended brands for getting superior results no matter your skill level
• 2K Clear Coat - Unlike other automotive clear coats the 2k is a two part paint that leaves you with professional results every time. 2k clear coats will cure faster and harder leaving you with a high gloss finish that will have everyone staring
• Long Lasting - Spraymax 2k clear coat spray paint offers maximum resistance to abrasion and scratching. With high chemical, gasoline, and weathering resistance this clear coat will keep your paint sealed for years to come
• 48 Hour Pot Life - Project taking longer than you thought or have a busy schedule? Spaymax has you covered with an astounding 48 hour pot life. Unlike the traditional 6-8 hours you'll have plenty of time to get your clear coat exactly how you want it
• Moshify Spray Can Trigger - Utilizing Spraymax’s rotating nozzle this spray trigger lets you paint like a spray gun without the hassle of all the clean up afterwards. Just snap it on and save your fingers from unnecessary pain and suffering

User questions & answers

Question:	How many can would I need to seal a paint job on a 99 4runner
Answer:	At least 12
Question:	Would this spray work over bedliner
Answer:	It would but you would need a few cans and only if plastic bedliner i wouldn't recommend. I'm sure you could find the right type for it . Other wise I'd spay with gun in booth
Question:	Is this enough clear coat to coat a pickup truck hood
Answer:	You can get one coat not sure about 2 since there is no mention of the size of pickup truck. You will also need to consider if you are painting indoors or outdoors. If you paint outdoors and there is any kind of wind you may not have enough to do one coat since most of the spray will be gone with the wind. Hope this helps.
Question:	Is it arcrilic enamil
Answer:	It has a harder that you activate on the bottom before you spray . Then you have 48 hrs to use after that its no good .

Product description

Spray Max 2K Glamour High Gloss Aerosol Clear. A 2 component aerosol clearcoat that is easy to apply, flows smooth and dries to a long lasting, high gloss finish.

• 2 component aerosol clearcoat that is easy to apply, flows smooth and dries to a long lasting, high gloss finish
• Easy to use aerosol. Activate, shake and spray. Unique nozzle delivers spray gun results
• Dries to a high gloss finish. Excellent weather and chemical resistance
• Pot life: 48 hours at 68 degree fahrenheit ambient temperature
• Manufacture date on can

User questions & answers

Question:	Can this be used with duplicolor
Answer:	Yes but don't use duplicolor. Call around local auto paint stores and get real auto paint put into aerosol cans. Transtar is a decent one who will do this and it's better quality. My personal opinion.
Question:	can i use this with high gloss plastidip on a chrome grille
Answer:	Not sure about chrome. I would coat the chrome grill with adhesion spray first then plastidip. Apply this Spray Max in the end but make sure the adhesion and the plastidip to stick firmly first.
Question:	How long after applying this can I colorsand and polish
Answer:	Same as any other clear. Obviously depends on air temp/humidity etc. Also, the longer it dries, the harder it is, so hard to cut
Question:	So, i’m an artist and i resin my paintings. is this technically a resin/epoxy in a spray can? could i possibly use this on my paintings
Answer:	Yes it works well. I also do paintings (abstract) and used 2 part resin. The spray Max is just as good and durable. The draw back is, is once you puncture the internal can inside the main can, you only have about 48 hours to use. So you have to make sure you have a few paintings ready to go and coat them all at the same time. Also, purchase a respirator. Harbor freight has them for Les than $20. You get quite a few uses from them, then just throw away and purchase a new one. The vapors in the 2 part spray Max are not good to be inhaling. Outside is fine, but in a enclosed area is not good unless you wear a respirator.

Product description

This product is not available in California, Maryland, or Delaware. Please order SS-132. Please note, If you order this product to be shipped to these states, a replacement may be used and will delay your shipping. SMR-130 Speedo-Line Universal Clearcoat has been specifically formulated for the automotive repair industry. SMR-130 has been designed to increase profit without sacrificing quality. SMR-130 is a 2K acrylic urethane clear with superior UV and chemical resistance. SMR-130, Speedo-Line Universal Clearcoat utilizes new resin technology which allows for a fast cure while maintaining an ultra high gloss. SMR-130 is easy to apply and can be BUFFED in 4-6 HOURS, yielding a high DOI. The SMR-130 is a national rule, 4.2 lbs/gallon VOC product. Not for sale in 2.1 lbs/gallon VOC areas. This sale is for a gallon of clear and a quart of medium activator. SMR-130 SPEEDO-LINE CLEARCOAT Gallon SMR-75 SPEEDO-LINE Activator Medium 65°F - 80°F Quart Not for sale in California, Delaware or Maryland

• Universal Durable Clear, Medium Speed, 65 - 80 deg. F
• Fast Dry and Cure
• High Gloss and DOI
• UV Resistant for excellent weathering
• Easy Buffing

User questions & answers

Question:	Will this clear work over Dupli color lacquer base
Answer:	I would assume so but I would try on a test panel first
Question:	Do i need to add hardner
Answer:	Yes, this kit comes with the hardener (activator)
Question:	How do I tint this black. What kind of paint should I use to tint
Answer:	Usually works most Acrylic paint and non enamel paint, carefully follow the mixing procedure & safety guidelines.
Question:	Can I use this over oil based enamel
Answer:	I wouldn't recommend it. Automotive urethane is susceptible to fisheyes from contamination and oil-based paint contains oil. The chances for success are slim. As a 30 year paint and collision tech I come across this question frequently. The tractor paint paint paint jobs sound great until you have to strip it off to put something better on it because you're tired of dealing with the lack of gloss etc. The SMR-130 is a great clear for the money and has an unbelievable gloss.

Product description

The Auto Paint Depot Clear is a 1K is a high performance clear coat that gives 2K performance with the convenience of a single pack. Compatible with most paint systems including water based, this clear is ideal for spot repairs and complete resprays.

• Crystal clear, High Gloss, Isocyanate free
• Durable Finish, UV resistant
• Hardens rapidly, giving a high build
• Good flow and non-sag properties
• Cured clear has excellent image depth

User questions & answers

Question:	Can I use this for minor carbon fiber (non structural damage) chips
Answer:	This is an automotive acrylic lacquer paint. Please check with the manufacturer of the item you are repairing to see if it is compatible.
Question:	Can I use this to cover small spots where clear coat is peeling without any buffing for shine
Answer:	Yes you can.
Question:	How long does this take to dry
Answer:	Dry to touch in a couple of hours for just a small spot, not too thick.
Question:	How long do does the unused portion of the product last after opening the jar
Answer:	Your clear should last a year or 2 if proper storage is followed. This is a solvent based product which has evaporative properties. As such it depends on proper storage. Be sure tat the jar lip and threads are clean to the glass and the lid makes a proper seal. Store out of direct sunlight in a cool (not freezing) dry place.

Product description

A tough Clear Coat that can be applied Direct To Metal or over other coatings. This water clear high gloss clear coat remains permanently flexible and is able to perform in the toughest environments without yellowing, cracking or peeling.

• Direct To Metal Application - No Additives Needed
• Apply directly to Painted Surfaces
• Single Part Formula which is Tougher and Harder than 2 Part Clear Coats
• Seals both Paints and Metals and is Self Leveling (No brush Marks)

User questions & answers

Question:	Is a rotisserie required when top coating saltwater fishing plugs? Thanks
Answer:	Just dip them, let excess run off back into can, hang and let dry.
Question:	how many sq ft would you estimate a 16oz can covers
Answer:	In general, 50 sq ft with 1 coats and 25 sq ft with 2 coats. This all depends on the coarseness of the surface.
Question:	Can this be thinned and/or cleaned with mineral spirits
Answer:	You can use KBS #1 Thinner (VOC Exempt) or Xylene for thinning DiamondFinish Clear. You can thin DiamondFinish Clear up to 30%.
Question:	Is this safe to use for kitchen counter tops
Answer:	DiamondFinish Clear is completely non-toxic once fully cured (7 days).

Product description

This product is not available in California, Maryland, or Delaware. Please order SS-132. Please note, If you order this product to be shipped to these states, a replacement may be used and will delay your shipping. SMR-1150 Speedo-Line Universal Clearcoat has been specifically formulated to be economical for the mobile repair industry. SMR-1150 has been designed to increase profit without sacrificing quality. SMR-1150 is a 2K acrylic urethane clear with UV and chemical resistance. Not for sale in California, Delaware or Maryland

• Universal Durable Clear, Medium Speed, 65 - 80 deg. F
• Medium Dry and Cure
• High Gloss and DOI
• UV Resistant for excellent weathering
• Easy Buffing

User questions & answers

Question:	I need to buy automotive paint and hardener for a motorcycle paint job. What’s the best brand paint on amazon
Answer:	speedokote is good quality, i would use it on a motorcycle. i use it on guitars and get a glass like finish, you can sand and buff it
Question:	Can i apply speedokote clearcoat 2k over dupont nason base color
Answer:	Yes, but use SMR-600 in the Nasson because it has poor adhesion without it.
Question:	is this compatible with single stage paint
Answer:	I used this over rustoleum oil based. I gave the rustoleum plenty of time to dry and off gas before applying the clear. I have to add that the paint job I performed was definitely unusual and not a "normal" type of application. I have had it on for 2 or 3 years now and have had no problems.
Question:	I want to clear coat spray a railing (patina). Will this product give a hard finish that will protect from harsh sun & UV rays for many years
Answer:	yes it will

Product description

Comes with a Quart 2k Urethane Glamour Clearcoat with Standard Activator MIX RATIO 4:1 with 4 parts clearcoat to 1 part Standard Activator. Can be reduced up to 10% with urethane reducer.

• MIX RATIO 4:1 with 4 parts clearcoat to 1 part Standard Activator. Can be reduced up to 10% with urethane reducer.
• Made in the USA
• Comes with a Quart 2k Urethane Glamour Clearcoat with Standard Activator

Product description

DupliColor's Paint Shop Finish system allows you to create a high-quality finish when using the primer, color and clear. It's a high-quality lacquer system designed for automotive and motorcycle applications. Paint Shop is easy to apply, dries quickly and can be buffed to a brilliant smooth finish. It's a ready to spray system, so no mixing or reducing is required. With no re-coat window, additional coats can be applied at any time

• Pre-reduced, ready-to-spray lacquer
• No mixing or reducing required
• Easy to apply and dries quickly
• No recoat window, reapply at any time
• Must be clear coated
• Wet sands easily
• Ideal for automotive exterior body projects

User questions & answers

Question:	Do they have more colors
Answer:	Yes white, blue, green, orange. Google Dupli-color paint shop.
Question:	Would need the base coat metallic silver for candy blue
Answer:	Depending on the effect you want
Question:	Can I apply this to plastic parts
Answer:	Yes, I used it on my overhead plastic luggage compartment for my vehicle. Works great No pealing if it’s applied properly. Good quality product.
Question:	will this jet black paint work for paint motorcycle frame and using paint brush
Answer:	It will work for a motorcycle frame, but I wouldn't use a brush, use a spray gun. Be patient and follow the instructions, and you can get a really great result!

Product features

Paint Shop Automotive Lacquer Finish System

Dupli-Color Paint Shop Automotive Lacquer Finish System gives you everything you need to create a high-quality DIY finish - primer, color and clear. Paint Shop is a high-quality lacquer system designed for automotive and motorcycle applications that is easy to apply, dries quickly and can be buffed to a brilliant smooth finish. Paint Shop is a ready-to-spray system that requires no mixing or reducing, and with no re-coat window, additional coats can be applied at anytime.

Product description

Description

MCC Automotive Clear Coat aims to provide the best experience for the customers. It is a strong adhesion with a smooth flow rate and outs a high quality shine on any car. It guarantees a high gloss finish with resistance to UV lights and chemicals. The kit comes with the activator. It comes with the new formulation we developed which cures the coat rapidly with accelarator.

MCC Clear Coat:

1) High Gloss

2) Easy Buffing

3) Medium Dry and Cure

4) Super Long Durability and UV Resistance

What's in the box : A Gallon of Hardener, 2 US Quartz of Activator, 2:1 Ratio

Upgrade your paint job today with MCC Automotive Body Accessories!

• [Recommended Instructions] : Use our Automotive High Gloss Clear Coat with fast speed spray at 75 F and bake at 135 F for 20 minutes to get best results.
• [High Gloss] : Put a shine on your car with MCC High Gloss Clear Coat. We prioritize customer trust and satisfaction.
• [Easy Buffing] : Our Automotive Clear Coat provides a smooth and easing buffing process for our valuable customers.
• [Medium Dry and Cure]: MCC Clear Coat paint provides a fast dry and cure process for your high quality paint job.
• [Super Long Durability and UV Resistance]: We come up with the best technology to provide our customers with durable products.

User questions & answers

Question:	Does this clear coat crack, yellow, mix well with rustolium paint
Answer:	Definitely you can use MCC Clear Coat. You can use all the 2k solvent include paints or water base paints. Just you have to make sure paint has to be dry. Also you can you use with base coat paint too right before dry. You have to apply in 30 minutes.
Question:	Inclulle su activador
Answer:	yes, it is included

Product description

Dupli-Color perfect match premium automotive paint is an easy-to-use, high-quality, fast-drying, acrylic lacquer aerosol paint specially formulated to exactly match the color of the original factory applied coating. Ideal for use on all OEM paint surfaces, perfect match is available in a complete line of exact-match colors for current and late model import and domestic vehicles, making this product ideal for both small scale vehicle touch-up and for painting vehicle accessories.

• PROFESSIONAL
• Ideal for large touch ups, vehicle accessories, motorcycles, etc.
• Apply over any factory applied finish or Duplicolor Perfect Match Premium Automotive Paint
• Features an adjustable EZ Touch 360 degree nozzle and a wide spray pattern for smooth, even coats

User questions & answers

Question:	Will this paint match a 1999 civic hatchback oem silver
Answer:	The only way to be 100% sure is look up the paint code on the driver's side door jamb, as in: http://www.automotivetouchup.com/paint-codes/honda.htm
Question:	How do you select the paint color to match your vehicle
Answer:	Get the paint code from the car VIN tag (usually under the hood or inside driver door, and go to the Duplicolor website and look up by application.
Question:	clover
Answer:	I ordered 3 cans of paint, two of them were so old that no matter how long you shook them, the paint came out in globs & they were useless. I tried to RMA the paint, but Amazon told me that I couldn't ship them back because they're flamable, but I couldn't have a refund unless I returned the product. I've had good success with dupli-color before when buying it from the Auto Parts store, but I would recommend getting it locally rather than on Amazon.
Question:	I have a scratch on my bumper will i be able to just do the area with all the products or will i have to do the entire bumper to get it to blend
Answer:	You should not have to paint the entire bumper. First, prep the area where the scratch is. Clean the entire bumper, then depending on the depth of the scratch, you may want to lightly sand and area surrounding the scratch until all is smooth. Then wipe lightly with laquer thinner. Mask off the bumper to isolate it from the car. Get Dupli-color primer and apply a few light coats. Let them dry well before applying more. This will build up the area around the scratch that you had sanded. Let the primer dry overnight. Next, get some 400 and 600 grit sandpaper (wet type) and with a wet piece of 400, sand lightly the entire primed area. Keep dipping the paper in water and don't use fingertips! Clean area with wet cloth and repeat process with 600grit wet paper and you can then sand some of the areas surrounding the primer (scuff the painted surfaces around the repair) Clean it up with damp clothes and let dry. Apply the paint in light coats in a side to side motion. Don't try to cover the primer too fast. Light coats work best and allow dry time in between coats. Eventually the primer will be covered and some of the new paint will then overlap the original paint on bumper (this is part of the blending process) Once all is covered and you cannot see the primer under the paint, let it dry overnight.Next day, get some 1000 grit wet paper and sand the entire repair area lightly. This will help smooth out the new paint. Dont sand too hard so as to make the primer exposed. Sand beyond the new paint so as to scuff up the old untouched paint on the bumper. You are getting the surrounding area ready for the clear cloat blend.Wipe with clean wet cloth and when thoroughly dry you can apply the dupli color clear coat using the same light coat, overlap method. Now you will want to go beyond the repair area bringing the clear coat into the original painted surfaces by a few inches all around. Let the clear coat dry in between coats. Once clear is applyed, let it dry overnight. Next day you can wet sand the entire repair area with 1000 wet paper. Remember, no finger tips. Use your palm or get a sanding block but go lightly. Once you have finished sanding, wipe clean with wet cloth and then polish with Light polishing compound. You can do this by hand if you dont have a buffer. It may sound complicated, but that's a process that will give you the best results outside of going to a body shop. Another consideration, if the scratch is small, get a bottle of duplicolor touch up. It has the brush built in and you can possibly just carefully use the brush and paint to fill in the scratch. I hope this helps!

Product features

Perfect Match Premium Automotive Paint

Dupli-Color Perfect Match Premium Automotive Paint is an easy-to-use, high-quality, fast-drying, acrylic lacquer aerosol paint specially formulated to match the exact color of the original factory applied coating. Ideal for use on all OEM paint surfaces, Perfect Match is available in a complete line of exact-match colors for current and late model import and domestic vehicles, making this product ideal for both small scale vehicle touch-up and for painting vehicle accessories.

Product description

Auto Body Clear is easy to apply and dries quickly. No recoat window limitations means additional coats can be applied at any time.

• Acrylic lacquer clearcoat fomulation
• Seals and protects
• Ready to spray system
• Stops Rust formula
• Can be buffed to a high gloss finish

User questions & answers

Question:	Do you have to thin or add anything additional to the acrylic jet black paint? This is ofcourse assuming that primer has already been applied
Answer:	MOST ACRYLIC PAINT NEEDS REDUCED WITH ACRYLIC LACQUER THINNER 1 & 1/2 TO 1----- THE RUSTOLEUM CLEAR IS SUPPLIED AT SPRAYING CONSISTENCY
Question:	how many cans of this would i need to cover a small sedan for the base paint in jet black
Answer:	One gallon should be enough a light coat and a heavy coat, if the gallon come with a hardener.
Question:	Is this a water basepaint
Answer:	No, solvent based
Question:	Can the rustoleum autmotive primer be sprayed with a hvlp spray gun or does it require additional thinning? If so what can i thin it with? Thanks
Answer:	It can be sprayed with the hvlp spray gun, no issues

Product features

Rust-Oleum Automotive 32-Ounce Autobody Paint Quart

Auto Body Clear is easy to apply, dries quickly and can be buffed to a brilliant finish. No recoat window limitations means additional coats can be applied at any time.

• Acrylic Lacquer Clearcoat fomulation
• Seals and protects
• Ready to Spray System
• High Gloss Finish

For Best Results: Can be buffed to a high gloss finish

Product description

UV Resistant. Blends easily with existing 2K clear coats. Compatible with water-based base coats. High build. Fast drying. Spray gun like finish. Clog free nozzle.

• Blends easily with existing 2K clear coats
• Compatible with water-based base coats
• UV Resistant

User questions & answers

Question:	Does this can rattle because mine does not
Answer:	Rattles are used to mix pigments in colored paints and primers. Clears do not need rattles
Question:	Is there any issues with temperature while applying? I would be using it in an unheated garage at 40 to 50 degrees or less on a surface equally cold
Answer:	6 quarters later, just for future people who swing by... Colder temps mean it comes out thick, and flows slowly. You're more likely to get runs, sags, orange peel, or possible reflow defects. Coverage will be lower. It also takes longer for the solvent to evaporate. If you're planning on sanding your clear coat, the it could be okay. If you want to gun it and forget, then it really needs to be warmer. Using a heat gun is risky. It's very easy to boil, burn, bubble, or otherwise damage the paint all the way through. A space heater is probably better, but beware of fumes in an enclosed area. I've been known to leave the house door open and insulated garage door closed, and just let the garage warm up for an hour or so before I spray.
Question:	Is it water tight and compatible with posca pens
Answer:	When properly applied, the coating is nearly as good as professional products applied with spray equipment, so it'll be watertight as long as it fully covers the parts and the parts have no moving edges or seams (which would of course make a crack that would allow water ingress). sharp edges or corners could also provide points where the paint could become damaged and break a seal, but this applies of course to any coating. I have no idea about posca pens, or in what way it would or wouldn't be compatible.
Question:	How long does it take for the smell to wear off? I have an item I used it on that needs to be indoors. It's on my sunporch now, still rather smelly
Answer:	A day or two