12 best stroke oil

Product description

16 oz. bottle of high quality 2-cycle engine lubricant specially formulated for higher operating temperatures of air cooled engines. Easy-mix ashless oil for up to 50:1 mix ratio.

From the Manufacturer

The genuine Briggs & Stratton 2-Cycle Easy Mix Motor Oil - 16 Oz. with fuel stabilizer that leaves no residue and prevents plug fouling and engine deposits.

• 2-cycle easy mix motor oil
• Fuel stabilizer that leaves no residue and prevents plug fouling
• Recommended for toro, lawn boy, ryan and other 2-cycle outdoor power equipment
• Oil tip and measure
• Ashless additives; 16 ounce can

User questions & answers

Question:	Is 6 oz ok for my 80cc bike I have a 1 gal tank and I need 20:1 for after breaking in and 16:1 for breaking in need a response fast I need oil
Answer:	you can make the mix what ever you want just read the mix instructions
Question:	I have never used this before. Do i need to buy anything else for my trimmer
Answer:	I assume you have a 2 cycle trimmer. Read the manual on the correct oil/gas mixture. Most American built trimmers use a 40:1 or 50:1 mixture. 40:1 is 2.6 oz. per gallon. A little less oil if 50:1. Chinese 2 cycle motors still use 25:1 or 20:1 oil mixture. Use 5.1 oz. of oil per gallon of gas for 25:1 or a little more if 20:1 mixture.
Question:	How many gallons will this treat if one whole 16 oz bottle is used
Answer:	I use 50:1. That takes 2 oz per gallon so I get 8 gallons per bottle. It is great having the squeeze section so you can precisely measure before filling gas can.
Question:	What size (oz) is the measure cup on top? Say I neeeded 3.2 oz
Answer:	It has numerous markings including 32 to 1 or 3.2 oz there is a graduated scale on the side, loosen the cap and squeeze gently until the desired amount is reached. Should you decide to go with this, I used a sharpie to highlight the markings to make then easier to read

Product description

The most advanced 2-stoke oil ever developed for Ski-Doo snowmobiles equipped with Rotax E-TEC engines. Specially formulated for snowmobiles and watercraft with E-TEC, direct injection, semi direct and high performance carbureted 2-stoke engines. Its unique premium combination of proprietary synthetic base stocks and highly engineered additives will help ensure your engine attains ultimate performance and unsurpassed protection against friction and wear.

• Full Synethic 2-stroke oil for Sea-Doo's
• Full Synethic 2-stroke oil for Ski-Doo's

User questions & answers

Question:	I have a 1996 skidoo summit 670. Will this oil work for me
Answer:	Yes, this it the right type of oil for it. Ski-Doo and Sea-Doo two cycle engines require this type of oil due to the high RPMs
Question:	Will this work with a Yamaha OX66 fuel injected outboard
Answer:	Read your manual best answer I’ve only seen this used in evinrude machines
Question:	I was at a BRP dealer the other day and he has a new XPS two-stroke oil out what is that all about
Answer:	New and improved , change to a black bottle instead of a yellow one, just a upgrade.
Question:	Will this work for my Ski Doo 800Etec
Answer:	Absolutely yes it is the recommended Factory oil for your Skidoo snowmobile E-Tec 800

Product description

Brand new, genuine Mercury Marine/Mercruiser Oil Change Kit. This is a factory original equipment part, not aftermarket. Fits: Mercury Marine 4-Stroke 40-50-60hp EFI Outboard Oil Change Kit.

• SKU: 8M0081916
• Sold Each
• Please verify your own fitment

User questions & answers

Question:	The pic shows the drain plug gasket but it's not in the description. Does it come with a drain plug gasket
Answer:	Mine came with the wrong one. This kit was not the factory kit, but one assembled by the store.
Question:	where are the fusses
Answer:	Your owners manual will help you locate the ones you are looking for, or call your dealer. I’ve had no issues and therefore have not had to look myself. Guess cross that bridge when I come to it. Good luck.
Question:	will this work for a 2016 60hp comand thurst outboard
Answer:	I know it works on the non CT 60 A quick call to Mercury to verify is my suggestion.
Question:	Can i just buy the oil drain funel? Please provide link
Answer:	Yes, look for mercury part 8M0052100.

Product description

This product is an advanced technology tcw3 "low smoke" two-cycle oil formulated from a special blend of mineral oil, polybutene and a low ash additive system. Lucas 2-cycle racing oil is specially designed to prevent carbon deposits to the piston rings, skirt, crown and under crown areas and prevent exhaust port blocking. It is prediluted with a special solvent to facilitate mixing with gasoline's at all temperatures. Lucas 2-cycle racing oil is recommended for all air and liquid cooled tow-stroke engines and lower specific output air-cooled engines functioning under all operating conditions. Meets the requirement for "low smoke" oils often referred to as "smokeless" oils. Designed primarily for use with oil injection systems where no fuel/oil premixing is required. However, it is also acceptable for use in premixes of gasoline and oil up to 50:1. Key benefits- prevents carbon deposits - mixes well with gasoline's at all temperatures - meets requirements for "low smoke" oils.

• For best performance, follow the manufacturer's recommendations in your vehicle owner’s manual.

User questions & answers

Question:	Can it be used for an outboard boat engine
Answer:	Should work fine. It worked great in my oil-injected '83 Yamaha SS440 snowmobile. This is super high-quality 2-cycle oil, it burns clean and protects the engine really well. When I tore down my sled engine to do some upgrades, it still looked like new inside.
Question:	How about 1992 yamaha superjet 650 it doesn't say pc-w3 anywhere
Answer:	I love this oil and will continue to use it. I have a Honda 250R and it runs like a scared rabbit no issues no burning of oil. I use 36:1 ratio. Hope this helps
Question:	can this be used with an echo weed eater and leaf blower
Answer:	Absolutely! Just make sure that the oil to gas mixture is correct for whatever the implement manufacturer recommends (most often times it's 40 to 1 (gas to oil). I have been using this product for years and my lawn implements have never failed. Top notch product!
Question:	Does this stay suspended in high ethanol fuels like E
Answer:	I dont know i use only whit normal gas

Product description

Genuine Mercury Synthetic Blend Optimax DFI Outboard Oil Case 3 Gallons 92-858037K01. This is a factory original equipment accessory, not aftermarket. Manufacturer Part # 92-858037K01x3.

• 1 Case ?gallons
• This new synthetic blend oil was developed specifically for the greater demands of DFI outboard engines
• Higher operating temperatures combined with reduced oiling rates have put increased demands on the lubricants
• This exclusive new formula provides increased lubricity while minimizing carbon deposits, helps reduce smoke and provides the highest protection for the engine
• Not intended to be used in all applications specifying a TC-W3 oil

User questions & answers

Question:	Is this product good for a 75 hp Mercury Optimax
Answer:	I'm using it in a 225 hp Merc Optimax and have had no problems. I'm not a mechanic but I like the product.
Question:	This will be sent in the pictured black mercury optimax container and not quicksilver, correct? thanks
Answer:	It should arrive just as it looks providing you ordered the Mercury Optimax.
Question:	Did they change the packaging from the black label to the lighter color
Answer:	No there different but I use the white labels the black label oil are on demo but don't know what's the difference is
Question:	What is the part number on the package
Answer:	OEM Mercury Optimax DF1-2 cycle outboard oil sold by Shorts Mercury Discount Parts

Product description

H4 "Bigger" Outboard F150 10W30 Fc Oil&Nbsp;Change Kit H4 World- Protection, Yamalube Oil 10W30 Fc, Genuine Yamaha Oil Filter And Necessary Drain Bolt Gaskets (Model Specific) All In One Convenient Package. Fits Most; F150 P

• Defects in Workmanship 30 Days

User questions & answers

Question:	The picture says this is a f70 kit, but the descriptions says it is for a f150. is it the f150 kit
Answer:	I used it for my Yamaha F150, but ...I highly advise against buying the kit. You can get oil&filter for way less $$ from any marine store selling Yamaha parts. It is severely overpriced.
Question:	Will this filter fit a 150 hp my filter part number is 69j
Answer:	I have a 3 year old 150 four stroke and this is the OEM filter for it.
Question:	So which filter actually comes with this kit? The 69J-13440-03 or the 69J
Answer:	I am not sure of the number but it is the OEM filter for a late model Yamaha 150 four stroke 2017
Question:	I have a Yamaha 150 2016-17 4 stroke. Is this the correct oil kit
Answer:	It was the right kit for my 2006 Yamaha 150 four stroke.

Product description

Quicksilver Premium Plus TC-W3 2-cycle oil provides superior lubrication for outboards, PWC’s, motorcycles, snowmobiles and small engines. This ashless dispercement oil fights rust deposits in the combustion chamber, intake and exhaust passages. This NMMA TC-W3 oil reduces exhaust smoke and combats carbon deposits that can cause spark plug fouling or sticking rings. The Quicksilver brand is the leader in delivering uncompromising engine oils, parts and accessories to the marine industry for over 65 years.  Quicksilver is the premier supplier of Mercury Marine Original Equipment replacement engine parts, oils, and accessories, but also works to serve all Original Equipment brands in the marine and powersports industries.  It has earned a loyal following by providing the highest quality products that are tested through some of the most rigorous environments and testing procedures. No aftermarket company comes close to the level of research and design as Quicksilver; buying Quicksilver is buying performance, protection and peace of mind.

• Advanced Quicksilver formulation provides superior lubrication to maintain peak performance for all 2-cycle outboards, PWC’s and small engines
• Produced to meet Mercury Marine original equipment manufacturer specifications to best protect your Mercury or Mariner outboard, other brands of outboards, PWC’s and small engines
• Prevents corrosion in combustion chamber, intake and exhaust passages
• Specially formulated for the severe conditions of high horsepower engines at high speed, the instant power demand for hole shots and long distance WOT operation
• For us in oil injection systems or can be used in premix for 2-cycle engines

User questions & answers

Question:	Does this product have a stabilizer in it
Answer:	Not to my knowledge
Question:	How's this compare to the royal purple synthetic? Anyone compare? I don't like smoke or smell, so want the cleanest burning
Answer:	I have not made any comparison but note that on my PWC there is no smoke.
Question:	Would this work for a Harley Davidson Iron
Answer:	This is a marine oil product. I don't know.
Question:	Is this oil synthetic or a synthetic blend type
Answer:	The product I ordered and received in August 2015 is a synthetic blend. "Synthetic Blend" is plastered on the front of the jug (but is not in the product that is pictured). I checked the product id# wondering if the wrong product had been shipped. The model # on the jug is 27Q01 and that is what the item description says they are selling.

Product features

Performance

All Quicksilver products are produced to match Mercury Marine's stringent original equipment manufacturer performance specifications.

Protection

We know what is best for your engine. We design products to fit all types of marine engines, no matter the brand.

Peace Of Mind

We validate product; quality and integrity are paramount. Buying Quicksilver is buying performance, protection, and peace of mind.

The Quicksilver Promise

Quicksilver products are designed and validated by a company that builds marine engines. We know what is best for your engine. We design products to fit all types of marine engines, no matter the brand. We validate product; quality and integrity are paramount. Quicksilver is performance, protection, and peace of mind.

Product description

Clean oil is essential in reducing friction and preventing damage to internal components, providing many years of engine life. Engineered for sterndrive and outboard applications, this 4-stroke 10W-30 marine oil has been extensively tested to ensure impressive protection against corrosion and wear. Features premium-grade synthetic and mineral-based stocks, exceeding all marine industry 4-stroke oil requirements including FC-W and FC-W Catalyst Compatible. The Quicksilver brand is the leader in delivering uncompromising engine oils, parts and accessories to the marine industry for over 65 years. Quicksilver is the premier supplier of Mercury Marine Original Equipment replacement engine parts, oils, and accessories, but also works to serve all Original Equipment brands in the marine and powersports industries. It has earned a loyal following by providing the highest quality products that are tested through some of the most rigorous environments and testing procedures. No aftermarket company comes close to the level of research and design as Quicksilver; buying Quicksilver is buying performance, protection and peace of mind.

• Formulated to protect against corrosion and excessive wear
• Designed for use with all 4-stroke marine engines
• Offers outstanding strength and viscosity retention
• 1 gallon bottle
• 10W-30 viscosity

User questions & answers

Question:	Is it 3 gallons? That's a good deal
Answer:	What I did was order the 4-stroke by mistake. I needed the 2-stroke which is a full synthetic ONE GALLON. I was under the impression that the 4-stroke was also ONE GALLON.
Question:	I have a honda 150 hp bf150a. will this work for my motor
Answer:	If it is a 4 stroke Honda yes, if you have a 2 stroke Honda get the 2 stroke quicksilver
Question:	is this oil synthetic and ok to use for inboard engine? Title states inboard ok but description mentions only outboard
Answer:	I use this 4 stroke quicksilver in my 351 I/O motor, recommend this for High rpm

Product features

Performance

All Quicksilver products are produced to match Mercury Marine's stringent original equipment manufacturer performance specifications.

Protection

We know what is best for your engine. We design products to fit all types of marine engines, no matter the brand.

Peace Of Mind

We validate product; quality and integrity are paramount. Buying Quicksilver is buying performance, protection, and peace of mind.

The Quicksilver Promise

Quicksilver products are designed and validated by a company that builds marine engines. We know what is best for your engine. We design products to fit all types of marine engines, no matter the brand. We validate product; quality and integrity are paramount. Quicksilver is performance, protection, and peace of mind.

Product description

Castor 927 is a unique blend of highly refined castor oil, a specially prepared synthetic and an additive system that reduces carbon and gum formation and provides excellent rust and corrosion protection. Castor 927 also contains an exclusive additive that keeps power valves cleaner and working properly. Castor 927 is biodegradable. Castor 927 keeps on lubricating; where other lubricants turn to carbon or vaporize, and provides extra protection on cylinder walls, bearing journals and other critical areas at temperatures much higher than other lubricants. Castor 927 is ideally suited as a premix for both leaded and unleaded fuels. CAUTION: Not intended for use in oil injection systems. When blending with alcohol it normally requires more oil. Care must be exercised when blending with low specific gravity (below 0.730) race gasoline or aviation fuels and in temperatures below 35 degree Fahrenheit as separation may occur. Separation may also occur in alcohol containing a high percentage of nitro methane. Check before using.

• Castor 927 is a unique blend of highly refined castor oil, a specially prepared synthetic and an additive system that reduces carbon and gum formation and provides excellent rust and corrosion protection
• Castor 927 also contains an exclusive additive that keeps power valves cleaner and working properly
• Castor 927 is biodegradable
• Castor 927 keeps on lubricating; where other lubricants turn to carbon or vaporize, and provides extra protection on cylinder walls, bearing journals and other critical areas at temperatures much higher than other lubricants
• Castor 927 is ideally suited as a premix for both leaded and unleaded fuels

User questions & answers

Question:	Will this work in my toro 2stroke snowblower
Answer:	Absolutely will work and it smells so good .you need a measuring cup and need to know the ratio you can look up online for gallons of gas per ounces of mix
Question:	There are no mixing instructions visible on this container (64oz.) Skew decal on back may cover it and tears off label. Can you send mixing instructio
Answer:	I am using the oil for my sons yamaha kt100s racing engine. We are mixing 7 ozs. oil per gallon of fuel which is a mix of 3 gallons 91 octane with no ethanol and 2 gallons of track tech 111. Hope this helps out.
Question:	What is better 2stroke oil for kawasaki 1995 x2 jetski - caster 927 or kawasaki 2stroke oil
Answer:	A 1995 Kawasaki jet ski should be injected . This is not injector oil . Go with amsoil hp injector oil . You will not be disappointed
Question:	does this smell like Castrol R
Answer:	The smell is why I buy it. Reminds of racing motorcycles

Product features

Maxima Racing Oils are Proudly Made in the USA

Maxima Racing Oils was created for world-class racers, men and women who challenge the limits of possibility. Their demands on equipment drive us to look beyond conventional ideas and to exceed industry standards. It’s in our DNA to identify problems, formulate solutions and execute at the highest levels of competition. A simple goal to make things better than ever thought possible.

Superior Technology Transcends Sport to Enhance the Experience

Maxima believed it could change lubrication and along our 35+ year journey – many others believed in us too. Superior technology transcends sport to enhance the experience of consumers and racers alike. Our market leading products are used in over 50 countries around the globe and include engine oils, suspension fluids, coolants, care products and accessories. These products represent our commitment to excellence and a passion for redefining what is possible.

Experience The Difference

Founded in 1979 and headquartered in Southern California, Maxima is recognized as one of the most coveted brands in the racing industry. Decades of active involvement in professional racing has led to powerful technology and a full array of market leading products.

Challenge Yourself

Maxima is a race-inspired, product driven company. We formulate, develop, manufacture and distribute high performance oils, lubes and ancillary products. The essence of our brand is communicated through hundreds of championships with world class racers, tuners and teams who rely on Maxima for unsurpassed performance in high-stress conditions without fail.

Product description

Six Pack Of Echo OEM 2.6 fl oz PowerBlend® XTended Life Oil

Part # 6450001

6 2.6 oz Bottles

1 Bottle to One Gallon of Gas

• Echo 6 Pack of 1 Gallon Power Blend Oil Mix (50:1) 6450001

User questions & answers

Question:	How do I make it 25:1 ratio
Answer:	Usually the ratio is 50:1, that's a little container of two cycle oil (2.6 oz) to one gallon of gas. To make 25:1 use the 2.6 oz two cycle oil to a 1/2 gallon of gas. That's the simple way. I just got a two cycle engine that's Chinese made and this appears to be the trend so I tend to think it may be important to get the extra oil in the mix just to be safe.
Question:	Does this product contain Fuel Stabilizer
Answer:	Yes, it does contain Fuel Stabilizer. Great for off season to help jets from getting clogged and keeping fuel fresh. Highly recommended. Its what I use in all my 2 stroke motors.
Question:	Is this a synthetic oil? If not I bought it for nothing
Answer:	It states right on the bottle's label that it's a synthetic blend, which typically means it's part petroleum and part synthetic. I've been using the Echo branded 50:1 oil in my Echo weedeater (now 18 years old) and Echo leaf blower (now 20 years old), and with seasonal maintenance and proper care, both still start and run like they did when they were new.
Question:	First time user...what are the directions
Answer:	One gallon of gas to one 2.6 oz bottle of oil equals the 50 to 1 ratio.

Product description

AMSOIL FULL SYNTHETIC Dominator 2-Cycle Oil

User questions & answers

Question:	Do you mix this with 93 octane
Answer:	You can mix it with regular pump gas. Higher octane is for higher compression 2 strokes. If you dont have high compression higher octane will actually resist combustion.
Question:	How much per gallon I can use it to make mix for week walker and all garden tools
Answer:	50:1 is 2.6 oz per gallon
Question:	Is this like the original 2-cycle Amsoil where you can mix it up to a hundred to one
Answer:	NO, this is great oil but you can't mix it at 100-1. This is Amsoil "Dominator" 2-cycle oil, and, though it will work in anything, it is formulated primarily for large, high-revving racing engines like motocross bikes and snowmobiles and it mixes at 50-1. The 100-1 Amsoil you are thinking of is called "Saber" and they recently stopped recommending that for anything other than small, low-revving engines like leaf blowers, string trimmers and maybe scooters and such. They have a great website that explains it all in better detail.

Product description

Clean oil is essential in reducing friction and preventing damage to internal components, providing many years of engine life. Engineered for sterndrive and outboard applications, this 4-stroke 25W-40 marine engine oil has been extensively tested to ensure impressive protection against corrosion and wear. Exceeds all marine industry 4-stroke oil requirements including FC-W and FC-W Catalyst Compatible. The Quicksilver brand is the leader in delivering uncompromising engine oils, parts and accessories to the marine industry for over 65 years. Quicksilver is the premier supplier of Mercury Marine Original Equipment replacement engine parts, oils, and accessories, but also works to serve all Original Equipment brands in the marine and powersports industries. It has earned a loyal following by providing the highest quality products that are tested through some of the most rigorous environments and testing procedures. No aftermarket company comes close to the level of research and design as Quicksilver; buying Quicksilver is buying performance, protection and peace of mind.

• Formulated to protect against corrosion and excessive wear
• Designed for use with all 4-stroke marine engines
• Offers outstanding strength and viscosity retention
• 1 gallon bottle
• 25W-40 viscosity

User questions & answers

Question:	Is this oil fc-w certified, synthetic blend? thank you for your help
Answer:	no its not
Question:	Product features state “1 gallon bottle (pack of 3)”. Is Price for 3 gallons
Answer:	It should be, right? I just got one 1-gallon jug. (I paid $31.95 at the time. Boating Accessories was the seller.) Walmart stores in my area sell this oil for about $10 a quart, so I felt I was getting a decent deal. It would have been a great deal if I would have received 3 jugs as advertised.
Question:	is this oil for the boat
Answer:	Yup, I use it in my 115 Mercury outboard. 4 stroke
Question:	What's the difference between mercury oil
Answer:	It is the same as Mercury oil. Quicksilver is the Mercury lubricant brand and has been for years.

Product features

Performance

All Quicksilver products are produced to match Mercury Marine's stringent original equipment manufacturer performance specifications.

Protection

We know what is best for your engine. We design products to fit all types of marine engines, no matter the brand.

Peace Of Mind

We validate product; quality and integrity are paramount. Buying Quicksilver is buying performance, protection, and peace of mind.

The Quicksilver Promise

Quicksilver products are designed and validated by a company that builds marine engines. We know what is best for your engine. We design products to fit all types of marine engines, no matter the brand. We validate product; quality and integrity are paramount. Quicksilver is performance, protection, and peace of mind.