8 best racing motors

Product description

Valvoline VR1 Racing Oil's high zinc provides race-level protection for high performance engines on the race track or the highway. Valvoline Synthetic Racing Oil's exclusive chemistry is designed to reduce friction and enhance power. It is among the most popular engine lubricants in all types of racing including paved and dirt ovals, and drag racing. Formulated for race engines, but compatible with passenger vehicles too.

• Full Synthetic high zinc/phosphorus formulation for anti-wear protection, including push-rod and flat tappet applications
• Formulated to increase horsepower
• Enhanced anti-foam system protects engine during extreme stress
• Recommended for engines burning gasoline and full or partial alcohol fuels
• Designed for the race track, but is great for other high performance vehicles too

User questions & answers

Question:	How old is this oil ? Why is it so much cheaper than normal
Answer:	Racing is trying to be outlawed and this oil is good for racing and non emissions vehicles like i have. No new cars use it....
Question:	its not allowing shipment to california. Is there a reason for this
Answer:	Walnart. Cheaper too $6.78 a bottle 10w30 :-)
Question:	Might be a dumb question but is this oil synthetic? I don't see anything on it that says it is
Answer:	This oil is organic. The Valvoline 20W50 synthetic oil has a black label, and it clearly states "synthetic" on the label. I use the synthetic in my 1952 MG TD because the oil has high zinc content that is a must for older engines.
Question:	Is this a full synthetic ? I notice they sell a black container also
Answer:	The silver container is conventional oil and has about 1400 ppm ZDDP. The black container is full synthetic and has about 1200 ppm ZDDP. Both of these oils have exceptional shear/anti wear properties, but the high phosphorus content will foul catalytic converters over time.

Product description

Well suited for a variety of hot rods and vintage vehicles and is appropriate to use in any engine that calls for a 10W-40 grade motor oil. Features storage protection additives that guard against rust and corrosion during winter storage. * 10W-40 * No ZDDP or additives required * Sold as a box of 12 quarts Driven Oil Usage Gude (PDF) Material Safety Data Sheet (PDF)

• Sold as a box of 12 (1 quart bottles)
• There are no ZDDP or additives required
• This conventional motor oil has a 10W-40 weight
• Can be used in any engine that calls for a 10W-40 grade motor oil
• Features storage protection additives that guard against rust and corrosion during winter storage

User questions & answers

Question:	My engine builder says to use hr-6 for my classic. what is the hr rating of this
Answer:	HR is not a rating, it stands for Hot Rod. The Joe Gibbs Driven oils contain zinc which is better for older or high performance engines. By engine builder recommends it for those reasons plus it clings to metal surfaces better than other oils which prevents dry start up when the vehicle isn't driven regularly.
Question:	Is this case listed the conventional high zinc
Answer:	Yes this oil is the high zinc petroleum for older classic motors.

Product description

Great for small block and crate engines. Features storage protection additives that guard against rust and corrosion during winter storage. 10W Multi-grade formula provides excellent start-up protection for flat tappet, overhead and roller cam engines. No ZDDP or additives required. Viscosity typical of 10W-30. Formerly referred to as HR2.

• Sold as a box of 12 (1 quart bottles)
• This conventional motor oil is ZZDP enhanced
• Ideal for small block street cruisers and "crate" motors
• The 10W Multi-grade formula provides excellent start-up protection

Product description

The definitive sim racing wheel for PlayStation 5, PlayStation 4 and PlayStation 3. Driving Force is designed for the latest racing game titles for your PlayStation 5, PlayStation 4 or PlayStation 3 console. Add Driving Force to your controller selection and you may never want to race with a regular controller again. With dual motor force feedback, on wheel controls and responsive pedals, G29 makes racing feel like the real deal.

• The definitive sim racing wheel for PlayStation 5, PlayStation 4 & PlayStation 3: Realistic steering and pedal action for the latest racing titles
• Built to last: Durable solid steel ball bearings, stainless steel shifter and pedals and hand stitched leather wheel grip
• Dual motor force feedback: Realistically simulates the racing experience with smooth, quiet helical gearing
• Easy access game controls: On wheel D pad, console buttons, paddle shifters and LED indicator lights
• Responsive floor pedal unit: Accelerate, brake and change gears with the feel of an actual car. Pedal piston sleeves: Polyoxymethylene thermoplastic (POM)
• G29 requirements: PlayStstion 5, PlayStation 4 or 3, Powered USB port or Windows 10, 8.1, Windows 8 or Windows 7, mac OS 10.10+

User questions & answers

Question:	Is this a glorified driving force GT
Answer:	Yes most drills are adjustable.
Question:	does this wheel work with Windows 10 on pc
Answer:	You will probably drill out the peg holding the leg to the table. It would be a cool approach if worked. PS. There are solid drill extensions available that may have a greater chance of success.. I though would see the torque and rotation as being destructive to any leg less than 3" diameter..
Question:	Will it work with this amazing shifter? http://amzn.to/2kKBi9e
Answer:	No idea what a nail will do to the path, I make sure as best I can not to hit one. Other boring bits dulled instantly when I hit a large nail where the path cannot be changed
Question:	Do I have to wear a helmet while using as depicted in the cartoon advert above or is it safe to use while letting the wind flow through my hair
Answer:	On the 9/16 diameter bit, the shank is round but there are 3 flats on the end that goes in the drill chuck to prevent slippage.

Product features

G29 Driving Force Racing Wheel

Experience your PlayStation 5, PlayStation 4 and select PC racing titles like never before with the advanced driving simulation and realism of G29 Driving Force Racing Wheel and pedals.

Responsive, Adjustable Floor Pedal Unit

Throttle, pressure-sensitive brake, and clutch pedals let you accelerate, brake and change gears with the feel of an actual car. For finer control, reposition the pedal faces for easy heel-toe maneuvers. Rubber feet and a retractable carpet grip system keep your pedals right where you put them.

Product description

Blue Colored heat sink with Cooling Fan Can be adjusted to fit Traxxas Slash, Stampede, Rustler, Bandit, Etc. FEATURES: Aluminum heat sink and cooling fan helps motor to run cooler YOU WILL RECEIVE: One motor heat sink with cooling fan with red 2-pin wire connector REQUIREMENTS: Installation on motor SPECIFICATIONS: length: 1.7 (43mm) width: 1.4 (37mm) height: 1.6 (40mm).

• Use Hot Racing replacement parts and hop-ups to get the most out of your RC Vehicle
• Made from high quality materials for long lasting performance
• This is for use on RC products, consult your user's manual for exact parts listings
• Package dimensions: 3.0" L x 1.25" W x 2.0" H

User questions & answers

Question:	Will this fit the traxxas 1/16 Erevo with the titan 12T 550 brushed motor
Answer:	Yes it should. The motor is the same diameter as the VXL version. It fit both my Rustler 2wd and 4x4 as well as my Slash 2wd.
Question:	Will it fit the red cat tornado
Answer:	It fit perfect on the Redcat Blackout. I’m sure they’re the same size motor. I also have it on a 1415 5600kv Castle motor and it fits great!
Question:	so it does not fit teh Slash. I ran the wires to the power outlet but then won't reach. The aux outlet is same female so that is out of play
Answer:	Yes it will work with slash but you will need a universal servo extension wire to connect to receiver box. I use racers edge 6" extension, part # RCE1641
Question:	Is it waterproof
Answer:	As far as I know yes

• The XING-E series is a very strong and powerful FPV motor for FPV racing, great value choice with well known XING performance. Focuses on quality, the XING-E series is affordable motors that are strong and durable
• This 2207 sized motor features a high-strength 4MM steel hollow shaft, single strand winding for performance, M3 shaft screws and larger 9X4X4MM NSK bearings
• The iFlight XING series motor is characterized by support 6S
• These 4 pack 2207 brushless motor used standard M3 16mmx16mm mounting pattern at the bottom,160mm cable length for different frames and setups
• Each motor has been dynamic balanced, crush resistant damping bearing, eliminate vibration effectively

User questions & answers

Question:	So if i crash and break a motor you will fix or replace it
Answer:	Crashing and subsequently breaking the motor are usually not grounds for motor replacement. These motor are pretty tough to begin with.
Question:	Can I use these to upgrade my 4s Nazgul5 to 6s
Answer:	Should work fine. I run mine on 6S.
Question:	What motor timing should I use through blheli m or blheli s
Answer:	I’ve been using DSHOT 600 with no issues.
Question:	All 4 motors lock clockwise... is this correct? did they make a mistake when shipping? i thought you were supposed to have 2 nuts locking cw and 2 ccw
Answer:	dear buyer, all the motors sold on our store are 4pcs cw . not have ccw.

Product features

What's New in XING-E?

* Steel shaft, instead of titanium alloy

* 6061 aluminum top, instead of 7075 aluminum

* Not convex and different bell design

Features

-High-strength 4mm Steel shaft

-N52H High-temperature magnets, NSK bearings

-16x16mm hole pattern

-Single strand copper winding

-Hex bolt shaft set screw

Package included:

- 4 x XING-E 2207 1800KV Motor

- 4 x M5 Nylon Propeller Nut

- 16 x Mounting Screws

• 1.iFlight XING 1204 4500kv motor 1.5mm shaft
• 2.Motor mount hole: 9*9 φ2mm
• 3.Recommended Voltage: 2S-4S
• 4.Recommend propeller: 2.5inch 3inch propellers 1.5mm hole
• 5.Micro fpv motor suits for 2inch 2.5inch 3inch fpv micro drone toothpick frame,for iflight Alpha A85

Product features

XING 1204 4500KV Motor

iFlight 4pcs XING 1204 4500kv FPV Micro Motors

Super durable and ultra-light Unibody bell with only 6g on short wires.

Features:

-XING 1204 brushless motors are customized for 2~4S brushless whoop drone.

-Shaft Diameter: 1.5mm, Weight: 6g

-Compatible with 2-4S lipo battery

SPECIFICATIONS:

- Recommended Voltage: 2S-4S

-KV : 4500KV

-Configuration: 9N12P

- Bearing: NSK/5*2*2.5

- Stator Diameter: 12mm

- Stator Length: 4mm

- Shaft Diameter: 1.5mm

- Weight: 6g(with 100mm wires)

- Motor mount hole: 9*9 φ2mm

Package included:

- 4pc x XING 1204 Motor (4500KV)

- 16pcs x m2*5 screws

- 8pcs x m2*7 screws

NOTE: Propeller does not include.

Product description

Designed to offer higher performance engines the cold temperature operational benefits of an SAE 20W engine oil while providing the desired film strength, sealing abilities and bearing, crankshaft, piston ring and valve train component anti-wear protection of an SAE 50 weight oil at normal engine operating temperatures.

• For best performance, follow the manufacturer's recommendations in your vehicle owner’s manual.

User questions & answers

Question:	Does it have Zink in it
Answer:	Yes it has zinc in it
Question:	Anybody running this in the Harley-Davidson M8 engines
Answer:	I've run this oil in my 2007 Electra glide for 65k miles, no problems. Engines that use oil may experience cat coating. Will be using it in my "new" 2013 FLHTK. If I had an M8 it's what I'd use, period. See utube
Question:	Doe this have moly or do i need to get a moly additive
Answer:	It has very very little only about 7 ppm of moly on most oil analysis. But it does have higher zinc about 1600 ppm on average.
Question:	Is this a fully Synthetic oil? I run royal 20W50 now
Answer:	No its a synthetic blend. Ive used this in my 75 porsche 914 for a long time it is very good oil. Just make sure and use it for the right application.